Also include the PCC_OFS in the return value. For user mode we
can pretend the PCC_OFS value is always zero.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reads the page table how PALcode would, except that the virtual
page table base register is not used.
Signed-off-by: Richard Henderson <rth@twiddle.net>
In particular, SWPIPL is used quite a lot by the Linux kernel.
Doing this inline makes it significantly easier to step through
without the debugger getting confused by the mode switch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We had two different methods in use, both of which referenced ENV,
and neither of which indicated to the generic code when different
compilation modes are not compatible.
Signed-off-by: Richard Henderson <rth@twiddle.net>
These aren't actually used yet, but we can at least access
them via the HW_MFPR and HW_MTPR instructions.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The EXC_M_* constants were being set for the EV6, not as set for
the Unix kernel entry point.
Use PS_USER_MODE instead of hard-coding access to the PS register.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This gets the PC right after an arithmetic exception. Also tidies
the code in the TLB fault handlers to use common code.
Signed-off-by: Richard Henderson <rth@twiddle.net>
There's no need to attempt to match EXCP_* values with PALcode entry
point offsets. Instead, compress all the values to make for more
efficient switch statements within QEMU.
We will be doing TLB fill within QEMU proper, not within the PALcode,
so all of the ITB/DTB miss, double fault, and access exceptions can
be compressed to EXCP_MMFAULT.
Compress all of the EXCP_CALL_PAL exceptions into one.
Use env->error_code to store the specific entry point.
Signed-off-by: Richard Henderson <rth@twiddle.net>
With all of the pre-existing code that would not compile gone,
this is the earliest point at which the target can be enabled.
There is no machine defined yet, so this will crash on startup.
Enable the target anyway, to make sure that further compilation
problems do not creep back in.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Delete all the code that tried to emulate the real IPRs of some
unnamed CPU. Replace those with just 3 slots that we can use to
communicate trap information between the helper functions that
signal exceptions and the OS trap handler.
Signed-off-by: Richard Henderson <rth@twiddle.net>
All of the "raw" memory accesses should be "phys" instead. Fix
some confusion about argument ordering of the store routines.
Fix the implementation of store-conditional.
Delete the "alt-mode" helpers. Because we only implement two
mmu modes, let /a imply user-mode unconditionally.
Leave some combinations of virt access without permission
checks as unimplemented. There are too many hoops through
which to jump, and these insns will not be needed in the
emulation palcode.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We were failing to generate EXC_DEBUG in the EXIT_PC_UPDATED path.
This caused us not to stop at the instruction after a branch, but
on the instruction afterward.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The previous patch removed the need for parameter puc.
Is is now unused, so remove it.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Function gen_pc_load was introduced in commit
d2856f1ad4.
The only reason for parameter searched_pc was
a debug statement in target-i386/translate.c.
Parameter puc was needed by target-sparc until
commit d7da2a1040.
Remove searched_pc from the debug statement and remove both
parameters from the parameter list of gen_pc_load.
As the function name gen_pc_load was also misleading,
it is now called restore_state_to_opc. This new name
was suggested by Peter Maydell, thanks.
v2: Remove last parameter, too, and rename the function.
v3: Fix [] typo in target-arm/translate.c.
Fix wrong SHA1 object name in commit message (copy+paste error).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
float*_eq functions have a different semantics than other comparison
functions. Fix that by first renaming float*_quiet() into float*_eq_quiet().
Note that it is purely mechanical, and the behaviour should be unchanged.
That said it clearly highlight problems due to this different semantics,
they are fixed later in this patch series.
Cc: Alexander Graf <agraf@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use float64_unordered_quiet() in helper_cmptun() instead of doing the
the comparison manually.
According to the "Alpha Compiler Writer's Guide", we should use the
_quiet version here, as CMPTUN and CMPTEQ should generate InvalidOp
for SNaNs but not for QNaNs.
Thanks to Peter Maydell <peter.maydell@linaro.org> and Richard
Henderson <rth@twiddle.net> for digging into the manuals.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
tcg_gen_exit_tb takes a parameter of type tcg_target_long,
so the type casts of pointer to long should be replaced by
type casts of pointer to tcg_target_long (suggested by Blue Swirl).
These changes are needed for build environments where
sizeof(long) != sizeof(void *), especially for w64.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
All implementations are now the same, and there is only one caller,
so inline the function there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The softfloat functions float*_is_nan() were badly misnamed,
because they return true only for quiet NaNs, not for all NaNs.
Rename them to float*_is_quiet_nan() to more accurately reflect
what they do.
This change was produced by:
perl -p -i -e 's/_is_nan/_is_quiet_nan/g' $(git grep -l is_nan)
(with the results manually checked.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
fprintf_function uses format checking with GCC_FMT_ATTR.
Format errors were fixed in
* target-i386/helper.c
* target-mips/translate.c
* target-ppc/translate.c
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
A minimal implementation that more or less corresponds to the
user-level version used by target-i386. More hoops will want
to be jumped through when alpha gets system-level emulation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use an exception plus start_exclusive to implement the compare-and-swap.
This follows the example set by the MIPS and PPC ports.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When (indirectly) calling raise_exception, don't emit cleanup
code at the end of the TB, as it is unused.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use an ExitStatus enumeration instead of magic numbers as the return
value from translate_one. Emit goto_tb opcodes when ending a TB via
a direct branch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is a per-cpu flag; there's no need for a spinlock of any kind.
We were also failing to manipulate the flag with $31 as a target reg
and failing to clear the flag on execution of a return-from-interrupt
instruction.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The inverted conditions as argument to the function looks wrong
at a glance inside translate_one. Since we have an easy function
to produce the inversion now, use it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
It's a simple mask and shift sequence.
Also, fix a typo in the actual masks used.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Almost all alpha helpers are at least TCG_CALL_CONST
and a fair few are also TCG_CALL_PURE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
