Test that qemu-img convert -c works when input image length is not a
multiple of the cluster size.
Previously an error message would be produced:
qemu-img: error while compressing sector 0: Input/output error
Now that qcow2 and qcow handle this case the test passes successfully.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Specifying the wrong driver could fail an assertion:
$ qemu-system-x86_64 -drive file.driver=qcow2,file=x
qemu-system-x86_64: block.c:721: bdrv_open_common: Assertion `file !=
((void *)0)' failed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
$QEMU_PROG happens to be 'qemu' in my setup, so this sed command
replaces a bit too much. Restrict it to the start of the line and to
when it's followed by a colon, i.e. the form used by error messages.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This tests PAM settings for the i440fx. This test does a lot of
byte MMIO which is fairly slow with qtest today. But the test
does complete in under 2 seconds.
We don't fully emulate PAM largely because of limitations with
KVM so we #if 0 that part of the test case.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-7-git-send-email-aliguori@us.ibm.com
This test compares all of the default register values against the
spec. It turns out we deviate in quite a few places. These
places are really only visible to the BIOS though which is why
this hasn't created any problems.
The deviation actually happens in the core PCI layer so I suspect
it's not a simple fix if we really care to fix it. For now, just
disable the affected checks.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-6-git-send-email-aliguori@us.ibm.com
This is a very simple allocator for the PC platform. It should
be possible to add backends for other platforms.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-5-git-send-email-aliguori@us.ibm.com
fw_cfg is needed to get the top of memory which is necessary for
doing PCI allocation and allocating RAM for DMA.
Add a PC version of fw_cfg and enough abstraction to support other
platforms.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-4-git-send-email-aliguori@us.ibm.com
This includes basic PCI support for the PC platform. Enough
abstraction should be present to support non-PC platforms too.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-3-git-send-email-aliguori@us.ibm.com
Currently we waitpid on the child process we spawn off that does
nothing more than system() another process. While this does not
appear to be incorrect, it's wasteful and confusing so get rid of
it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-2-git-send-email-aliguori@us.ibm.com
The operands for MAQ_SA_W.PHL/MAQ_SA_W.PHR must in specified format.
Otherwise, the results are unpredictable. Once the operands were corrected
in the tests (part of this change), a bug in mipsdsp_mul_q15_q15 became
visible.
This change corrects the tests for MAQ_SA_W.PHL/MAQ_SA_W.PHR and fixes
sign-related issue in mipsdsp_mul_q15_q15. It also removes unnecessary
comment.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Note in order to run these tests on ssh, you must be running a local
ssh daemon, and that daemon must accept loopback connections, and
ssh-agent has to be set up to allow logins on the local daemon. In
other words, the following command should just work without demanding
any passphrase:
ssh localhost
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Filter the name of the QEMU executable so the output can be diffed no
matter what QEMU_PROG is (e.g. qemu-system-x86_64).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Known bugs in to_json():
* A start byte for a three-byte sequence followed by less than two
continuation bytes is split into one-byte sequences.
* Start bytes for sequences longer than three bytes get misinterpreted
as start bytes for three-byte sequences. Continuation bytes beyond
byte three become one-byte sequences.
This means all characters outside the BMP are decoded incorrectly.
* One-byte sequences with the MSB are put into the JSON string
verbatim when char is unsigned, producing invalid UTF-8. When char
is signed, they're replaced by "\\uFFFF" instead.
This includes \xFE, \xFF, and stray continuation bytes.
* Overlong sequences are happily accepted, unless screwed up by the
bugs above.
* Likewise, sequences encoding surrogate code points or noncharacters.
* Unlike other control characters, ASCII DEL is not escaped. Except
in overlong encodings.
My rewrite fixes them as follows:
* Malformed UTF-8 sequences are replaced.
Except the overlong encoding \xC0\x80 of U+0000 is still accepted.
Permits embedding NUL characters in C strings. This trick is known
as "Modified UTF-8".
* Sequences encoding code points beyond Unicode range are replaced.
* Sequences encoding code points beyond the BMP produce a surrogate
pair.
* Sequences encoding surrogate code points are replaced.
* Sequences encoding noncharacters are replaced.
* ASCII DEL is now always escaped.
The replacement character is U+FFFD.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Test cases cover the two noncharacters in the BMP. Add tests for the
other 64 noncharacters.
Three existing test cases involve noncharacters U+FFFF and U+10FFFF.
Instead of deleting them as now duplicates, adjust them to use U+FFFC
and U+10FFFFD.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
# By Paolo Bonzini
# Via Paolo Bonzini
* bonzini/hw-dirs: (35 commits)
hw: move private headers to hw/ subdirectories.
MAINTAINERS: update for source code movement
hw: move last file to hw/arm/
hw: move hw/kvm/ to hw/i386/kvm
hw: move ARM CPU cores to hw/cpu/, configure with default-configs/
hw: move other devices to hw/misc/, configure with default-configs/
hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/
hw: move GPIO interfaces to hw/gpio/, configure with default-configs/
hw: move interrupt controllers to hw/intc/, configure with default-configs/
hw: move DMA controllers to hw/dma/, configure with default-configs/
hw: move VFIO and ivshmem to hw/misc/
hw: move PCI bridges to hw/pci-* or hw/ARCH
hw: move SD/MMC devices to hw/sd/, configure with default-configs/
hw: move timer devices to hw/timer/, configure with default-configs/
hw: move ISA bridges and devices to hw/isa/, configure with default-configs/
hw: move char devices to hw/char/, configure via default-configs/
hw: move more files to hw/xen/
hw: move SCSI controllers to hw/scsi/, configure via default-configs/
hw: move SSI controllers to hw/ssi/, configure via default-configs/
hw: move I2C controllers to hw/i2c/, configure via default-configs/
...
Message-id: 1365442249-18259-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The gthread coroutine backend is broken and does not produce a working
QEMU; it is only useful for some very limited debugging situations.
Clean up the backend selection logic in configure so that it now runs
"if on windows use windows; else prefer ucontext; else sigaltstack".
To do this we refactor the configure code to separate out "test
whether we have a working ucontext", "pick a default if user didn't
specify" and "validate that user didn't specify something invalid",
rather than having all three of these run together. We also simplify
the Makefile logic so it just links in the backend the configure
script selects.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1365419487-19867-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch fixes some of the memory leaks in test-visitor-serialization but not all of them.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of just checking once in exactly this order if there are
dependendies, non-COW clusters and new allocation, this starts looping
around these. This way we can, for example, gather non-COW clusters after
new allocations as long as the host cluster offsets stay contiguous.
Once handle_dependencies() is extended so that COW areas of in-flight
allocations can be overwritten, this allows to continue with gathering
other clusters (we wouldn't be able to do that without this change
because we would have missed a possible second dependency in one of the
next clusters).
This means that in the typical sequential write case, we can combine the
COW overwrite of one cluster with the allocation of the next cluster as
soon as something like Delayed COW gets actually implemented. It is only
by avoiding splitting requests this way that Delayed COW actually starts
improving performance noticably.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The old code detected an overlapping allocation even when the
allocations didn't actually overlap, but were only adjacent.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This should be based on the virtual disk size, not on the size of the
image.
Interesting observation: With some VM state stored in the image file,
percentages higher than 100% are possible, even though snapshots
themselves are ignored. This is a qcow2 bug to be fixed another day: The
VM state should be discarded in the active L2 tables after completing
the snapshot creation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Check that writes to an image opened with BDRV_O_SNAPSHOT do not modify
the underlying image file.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix for rndrashift_short_acc to set correct value to higher 64 bits.
This change also corrects conditions when bit 23 of the DSPControl register
is set.
The existing test files have been extended with several examples that
trigger the issues. One bug/example in the test file for EXTR_RS_W has been
found and reported by Klaus Peichl.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
A comment explains that -nographic hangs test case 007. This is no
longer the case so add -nographic. This makes the test suite faster and
more pleasant to run since no windows pop up.
I am not sure exactly when -nographic starting working for this case but
there is no fundamental reason why graphics are needed here. Make sure
the serial port is not on stdio, it would conflict with the monitor.
Also remove unnecessary trailing whitespace on these lines.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
If zero clusters are erroneously treated as unallocated, "qemu-img rebase"
will copy the backing file's contents onto the cluster.
The bug existed also in image streaming, but since the root cause was in
qcow2's is_allocated implementation it is enough to test it with qemu-img.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that each AioContext has a ThreadPool and the main loop AioContext
can be fetched with bdrv_get_aio_context(), we can eliminate the concept
of a global thread pool from thread-pool.c.
The submit functions must take a ThreadPool* argument.
block/raw-posix.c and block/raw-win32.c use
aio_get_thread_pool(bdrv_get_aio_context(bs)) to fetch the main loop's
ThreadPool.
tests/test-thread-pool.c must be updated to reflect the new
thread_pool_submit() function prototypes.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
As of glib 2.35.4, glib changed its logic for ordering test cases:
https://bugzilla.gnome.org/show_bug.cgi?id=694487
This was causing failures in rtc-test. Group the reordered test
cases into their own suite, which maintains the original ordering.
CC: qemu-stable@nongnu.org
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The previous implementation incorrectly used same macro to detect overflow
for addition and subtraction. This patch makes distinction between these
two, and creates separate macros. The affected routines are changed
accordingly.
This change also includes additions to the existing tests for SUBQ_S_PH and
SUBQ_S_W that would trigger the fixed issue, and it removes dead code from
the test file. The last test case in subq_s_w.c is a bug found/reported/
isolated by Klaus Peichl from Dolby.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
# By Paolo Bonzini (7) and others
# Via Kevin Wolf
* kwolf/for-anthony: (22 commits)
pc: add compatibility machine types for 1.4
blockdev: enable discard by default
qemu-nbd: add --discard option
blockdev: add discard suboption to -drive
block: implement BDRV_O_UNMAP
block: complete all IOs before .bdrv_truncate
coroutine: trim down nesting level in perf_nesting test
coroutine: move pooling to common code
qemu-iotests: Test qcow2 image creation options
qemu-iotests: Add qemu-img compare test
qemu-img: Add compare subcommand
qemu-img: Add "Quiet mode" option
block: Add synchronous wrapper for bdrv_co_is_allocated_above
block: refuse negative iops and bps values
block: use Error in do_check_io_limits()
qcow2: support compressed clusters in BlockFragInfo
qemu-img: add compressed clusters to BlockFragInfo
qemu-img: fix missing space in qemu-img check output
qcow2: record fragmentation statistics during check
qcow2: introduce check_refcounts_l1/l2() flags
...
Correct sign-propagation before multiplication in MULQ_W helper.
The change also fixes previously incorrect expected values in the
tests for MULQ_RS.W and MULQ_S.W.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The change corrects sign-related issue with MULQ_S.PH. It also includes
extension to the already existing test which will trigger the issue.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
20000 nested coroutines require 20 GB of virtual address space.
Only nest 1000 of them so that the test (only enabled with
"-m perf" on the command line) runs on 32-bit machines too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just create lots of images and try out each of the creation options that
qcow2 provides (except backing_file/fmt for now)
I'm not totally happy with the behaviour of qemu-img in each of the
cases, but let's be explicit and update the test when we do change
things later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Simple test for qemu-img compare to check it's working correctly.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Show how many clusters are compressed. This can be used to monitor how
many compressed clusters remain and whether to recompress the image.
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds the support for reporting the image end offset (in
bytes). This is particularly useful after a conversion (or a rebase)
where the destination is a block device in order to find the first
unused byte at the end of the image.
Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test cases are scraped from Markus Kuhn's UTF-8 decoder capability and
stress test at
http://www.cl.cam.ac.uk/~mgk25/ucs/examples/UTF-8-test.txt
Unfortunately, both JSON parser and formatter misbehave right now.
This test expects current, incorrect results. They're all clearly
marked, and are to be replaced by correct ones as the bugs get fixed.
See comments in new utf8_string() for details.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
# By Alin Tomescu (1) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
.gitignore: Ignore optionrom/*.asm
ppc: fix bamboo >256MB RAM initialization in hw/ppc4xx_devs.c
Add some missing qtest binaries to .gitignore
xilinx_axienet.c: Assert no error when making link
Remove forward declaration of non-existant variable
These binaries are generated during make check on at least some
configurations, so att them to .gitignore.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
