Only define the register if it exists for the cpu.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210120031656.737646-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was defined at some point before ARMv8.4, and will
shortly be used by new processor descriptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Using the cfg.use_non_secure bitfield and the MMU access type, we can determine
if the access should be secure or not.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <1611274735-303873-4-git-send-email-komlodi@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Using MMUAccessType makes it more clear what the variable's use is.
No functional change.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <1611274735-303873-3-git-send-email-komlodi@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This property is used to control the security of the following interfaces
on MicroBlaze:
M_AXI_DP - data interface
M_AXI_IP - instruction interface
M_AXI_DC - dcache interface
M_AXI_IC - icache interface
It works by enabling or disabling the use of the non_secure[3:0] signals.
Interfaces and their corresponding values are taken from:
https://www.xilinx.com/support/documentation/sw_manuals/xilinx2020_2/ug984-vivado-microblaze-ref.pdf
page 153.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <1611274735-303873-2-git-send-email-komlodi@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
QEMU option -cpu max(max_features) means "Enables all features supported by
the accelerator in the current host", this looks true for all the features
except guest max physical address width, so add this patch to enable it.
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20210113090430.26394-1-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using strncpy with length equal to the size of target array, GCC 11
reports following warning:
warning: '__builtin_strncpy' specified bound 256 equals destination size [-Wstringop-truncation]
We can prevent this warning by using strpadcpy that copies string
up to specified length, zeroes target array after copied string
and does not raise warning when length is equal to target array
size (and ending '\0' is discarded).
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <6f86915755219cf6a671788075da4809b57f7d7b.1610607906.git.mrezanin@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In our EXECUTE fast path, we have to ignore the content of r0, if
specified by b1 or b2.
Fixes: d376f123c7 ("target/s390x: Re-implement a few EXECUTE target insns directly")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210111163845.18148-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Using get_address() with register identifiers comming from an "r" field
is wrong: if the "r" field designates "r0", we don't read the content
and instead assume 0 - which should only be applied when the register
was specified via "b" or "x".
PoP 5-11 "Operand-Address Generation":
"A zero in any of the B1, B2, X2, B3, or B4 fields indicates the absence
of the corresponding address component. For the absent component, a zero
is used in forming the intermediate sum, regardless of the contents of
general register 0. A displacement of zero has no special significance."
This BUG became visible for CSPG as generated by LLVM-12 in the upstream
Linux kernel (v5.11-rc2), used while creating the linear mapping in
vmem_map_init(): Trying to store to address 0 results in a Low Address
Protection exception.
Debugging this was more complicated than it could have been: The program
interrupt handler in the kernel will try to crash the kernel: doing so, it
will enable DAT. As the linear mapping is not created yet (asce=0), we run
into an addressing exception while tring to walk non-existant DAT tables,
resulting in a program exception loop.
This allows for booting upstream Linux kernels compiled by clang-12. Most
of these cases seem to be broken forever.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210111163845.18148-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
RISBHG is broken and currently hinders clang-11 builds of upstream kernels
from booting: the kernel crashes early, while decompressing the image.
[...]
Kernel fault: interruption code 0005 ilc:2
Kernel random base: 0000000000000000
PSW : 0000200180000000 0000000000017a1e
R:0 T:0 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:2 PM:0 RI:0 EA:3
GPRS: 0000000000000001 0000000c00000000 00000003fffffff4 00000000fffffff0
0000000000000000 00000000fffffff4 000000000000000c 00000000fffffff0
00000000fffffffc 0000000000000000 00000000fffffff8 00000000008e25a8
0000000000000009 0000000000000002 0000000000000008 000000000000bce0
One example of a buggy instruction is:
17dde: ec 1e 00 9f 20 5d risbhg %r1,%r14,0,159,32
With %r14 = 0x9 and %r1 = 0x7 should result in %r1 = 0x900000007, however,
results in %r1 = 0.
Let's interpret values of i3/i4 as documented in the PoP and make
computation of "mask" only based on i3 and i4 and use "pmask" only at the
very end to make sure wrapping is only applied to the high/low doubleword.
With this patch, I can successfully boot a v5.11-rc2 kernel built with
clang-11, and gcc builds keep on working.
Fixes: 2d6a869833 ("target-s390: Implement RISBG")
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210111163845.18148-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Looks like something went wrong whiel touching that line. Instead of "r1"
we need a new temporary. Also, we have to pass MO_TEQ, to indicate that
we are working with 64-bit values. Let's revert these changes.
Fixes: ff26d287bd ("target/s390x: Improve cc computation for ADD LOGICAL")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210111163845.18148-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When building with GCC 10.2 configured with --extra-cflags=-Os, we get:
target/arm/m_helper.c: In function ‘arm_v7m_cpu_do_interrupt’:
target/arm/m_helper.c:1811:16: error: ‘restore_s16_s31’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1811 | if (restore_s16_s31) {
| ^
target/arm/m_helper.c:1350:10: note: ‘restore_s16_s31’ was declared here
1350 | bool restore_s16_s31;
| ^~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Initialize the 'restore_s16_s31' variable to silence the warning.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210119062739.589049-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update all users of do_perm_pred3 for the new
predicate descriptor field definitions.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210113062650.593824-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These two were odd, in that do_pfirst_pnext passed the
count of 64-bit words rather than bytes. Change to pass
the standard pred_full_reg_size to avoid confusion.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210113062650.593824-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SVE predicate operations cannot use the "usual" simd_desc
encoding, because the lengths are not a multiple of 8.
But we were abusing the SIMD_* fields to store values anyway.
This abuse broke when SIMD_OPRSZ_BITS was modified in e2e7168a21.
Introduce a new set of field definitions for exclusive use
of predicates, so that it is obvious what kind of predicate
we are manipulating. To be used in future patches.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210113062650.593824-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds handling for the SCR_EL3.EEL2 bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Message-id: 20210112104511.36576-17-remi.denis.courmont@huawei.com
[PMM: Applied fixes for review issues noted by RTH:
- check for FEATURE_AARCH64 before checking sel2 isar feature
- correct the commit message subject line]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On ARMv8-A, accesses by 32-bit secure EL1 to monitor registers trap to
the upper (64-bit) EL. With Secure EL2 support, we can no longer assume
that that is always EL3, so make room for the value to be computed at
run-time.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-16-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The stage_1_mmu_idx() already effectively keeps track of which
translation regimes have two stages. Don't hard-code another test.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-13-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the secure stage 2 translation regime, the VSTCR.SW and VTCR.NSW
bits can invert the secure flag for pagetable walks. This patchset
allows S1_ptw_translate() to change the non-secure bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-11-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VTTBR write callback so far assumes that the underlying VM lies in
non-secure state. This handles the secure state scenario.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-10-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the MMU indices for EL2 stage 1 in secure state.
To keep code contained, which is largelly identical between secure and
non-secure modes, the MMU indices are reassigned. The new assignments
provide a systematic pattern with a non-secure bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-8-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the ARMv8.4-SEL2 extension, EL2 is a legal exception level in
secure mode, though it can only be AArch64.
This patch adds the target EL for exceptions from 64-bit S-EL2.
It also fixes the target EL to EL2 when HCR.{A,F,I}MO are set in secure
mode. Those values were never used in practice as the effective value of
HCR was always 0 in secure mode.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-7-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-6-remi.denis.courmont@huawei.com
[PMM: tweaked commit message to match reduced scope of patch
following rebase]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a common helper to compute the effective value of MDCR_EL2.
That is the actual value if EL2 is enabled in the current security
context, or 0 elsewise.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-5-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will simplify accessing HCR conditionally in secure state.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-4-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not assume that EL2 is available in and only in non-secure context.
That equivalence is broken by ARMv8.4-SEL2.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-3-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This checks if EL2 is enabled (meaning EL2 registers take effects) in
the current security context.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-2-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In this context, the HCR value is the effective value, and thus is
zero in secure mode. The tests for HCR.{F,I}MO are sufficient.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-1-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The interface for object_property_add_bool is simpler,
making the code easier to understand.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The crypto overhead of emulating pauth can be significant for
some workloads. Add two boolean properties that allows the
feature to be turned off, on with the architected algorithm,
or on with an implementation defined algorithm.
We need two intermediate booleans to control the state while
parsing properties lest we clobber ID_AA64ISAR1 into an invalid
intermediate state.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-3-richard.henderson@linaro.org
[PMM: fixed docs typo, tweaked text to clarify that the impdef
algorithm is specific to QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without hardware acceleration, a cryptographically strong
algorithm is too expensive for pauth_computepac.
Even with hardware accel, we are not currently expecting
to link the linux-user binaries to any crypto libraries,
and doing so would generally make the --static build fail.
So choose XXH64 as a reasonably quick and decent hash.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- clean-ups to docker images
- drop duplicate jobs from shippable
- prettier tag generation (+gtags)
- generate browsable source tree
- more Travis->GitLab migrations
- fix checkpatch to deal with commits
- gate gdbstub tests on 8.3.1, expand tests
- support Xfer:auxv:read gdb packet
- better gdbstub cleanup
- use GDB's SVE register layout
- make arm-compat-semihosting common
- add riscv semihosting support
- add HEAPINFO, ELAPSED, TICKFREQ, TMPNAM and ISERROR to semihosting
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmAFXkcACgkQ+9DbCVqe
KkSP7Af/YNU4dWFf/N9CwvKQTSoJmBrO77HXccOJyYDS62hA8eoh83HWNll+xMV7
GxJDwQs0GS8J3oqcq1DktGgTUkCNxUfbHROjI2YXfRzoWnl0PFHY+Z/qRsq+bRhX
C3CiNCS/nM/NW2Q+H6TAD1MnXkia11+hqFhXrBRKVDON83MSvm0AspS5RO5eVpxo
TUTOD1YND+tAPWi5xAN+NyDuvfoY3tG4S4/DFUrHQfpS7uaHY/4qe8gMmJczveeo
uzJln9M7+pV5cgUWwr1fgCkbSyGgra+KX3GNoLIGS34C88cKRXAp7ZF19A3wQpiy
LXljmOinLfKuJqeRGwcnt6f8GrTn7A==
=XR0h
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-180121-2' into staging
Testing, gdbstub and semihosting patches:
- clean-ups to docker images
- drop duplicate jobs from shippable
- prettier tag generation (+gtags)
- generate browsable source tree
- more Travis->GitLab migrations
- fix checkpatch to deal with commits
- gate gdbstub tests on 8.3.1, expand tests
- support Xfer:auxv:read gdb packet
- better gdbstub cleanup
- use GDB's SVE register layout
- make arm-compat-semihosting common
- add riscv semihosting support
- add HEAPINFO, ELAPSED, TICKFREQ, TMPNAM and ISERROR to semihosting
# gpg: Signature made Mon 18 Jan 2021 10:09:11 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-180121-2: (30 commits)
semihosting: Implement SYS_ISERROR
semihosting: Implement SYS_TMPNAM
semihosting: Implement SYS_ELAPSED and SYS_TICKFREQ
riscv: Add semihosting support for user mode
riscv: Add semihosting support
semihosting: Support SYS_HEAPINFO when env->boot_info is not set
semihosting: Change internal common-semi interfaces to use CPUState *
semihosting: Change common-semi API to be architecture-independent
semihosting: Move ARM semihosting code to shared directories
target/arm: use official org.gnu.gdb.aarch64.sve layout for registers
gdbstub: ensure we clean-up when terminated
gdbstub: drop gdbserver_cleanup in favour of gdb_exit
gdbstub: drop CPUEnv from gdb_exit()
gdbstub: add support to Xfer:auxv:read: packet
gdbstub: implement a softmmu based test
Revert "tests/tcg/multiarch/Makefile.target: Disable run-gdbstub-sha1 test"
configure: gate our use of GDB to 8.3.1 or above
test/guest-debug: echo QEMU command as well
scripts/checkpatch.pl: fix git-show invocation to include diffstat
gitlab: migrate the minimal tools and unit tests from Travis
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/targets/riscv32-linux-user.mak
# default-configs/targets/riscv64-linux-user.mak
Adapt the arm semihosting support code for RISCV. This implementation
is based on the standard for RISC-V semihosting version 0.2 as
documented in
https://github.com/riscv/riscv-semihosting-spec/releases/tag/0.2
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-6-keithp@keithp.com>
Message-Id: <20210108224256.2321-17-alex.bennee@linaro.org>
The public API is now defined in
hw/semihosting/common-semi.h. do_common_semihosting takes CPUState *
instead of CPUARMState *. All internal functions have been renamed
common_semi_ instead of arm_semi_ or arm_. Aside from the API change,
there are no functional changes in this patch.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-3-keithp@keithp.com>
Message-Id: <20210108224256.2321-14-alex.bennee@linaro.org>
This commit renames two files which provide ARM semihosting support so
that they can be shared by other architectures:
1. target/arm/arm-semi.c -> hw/semihosting/common-semi.c
2. linux-user/arm/semihost.c -> linux-user/semihost.c
The build system was modified use a new config variable,
CONFIG_ARM_COMPATIBLE_SEMIHOSTING, which has been added to the ARM
softmmu and linux-user default configs. The contents of the source
files has not been changed in this patch.
Signed-off-by: Keith Packard <keithp@keithp.com>
[AJB: rename arm-compat-semi, select SEMIHOSTING]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210107170717.2098982-2-keithp@keithp.com>
Message-Id: <20210108224256.2321-13-alex.bennee@linaro.org>
While GDB can work with any XML description given to it there is
special handling for SVE registers on the GDB side which makes the
users life a little better. The changes aren't that major and all the
registers save the $vg reported the same. All that changes is:
- report org.gnu.gdb.aarch64.sve
- use gdb nomenclature for names and types
- minor re-ordering of the types to match reference
- re-enable ieee_half (as we know gdb supports it now)
- $vg is now a 64 bit int
- check $vN and $zN aliasing in test
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Machado <luis.machado@linaro.org>
Message-Id: <20210108224256.2321-11-alex.bennee@linaro.org>
gdb_exit() has never needed anything from env and I doubt we are going
to start now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-8-alex.bennee@linaro.org>
At present QEMU RISC-V uses a hardcoded XML to report the feature
"org.gnu.gdb.riscv.csr" [1]. There are two major issues with the
approach being used currently:
- The XML does not specify the "regnum" field of a CSR entry, hence
consecutive numbers are used by the remote GDB client to access
CSRs. In QEMU we have to maintain a map table to convert the GDB
number to the hardware number which is error prone.
- The XML contains some CSRs that QEMU does not implement at all,
which causes an "E14" response sent to remote GDB client.
Change to generate the CSR register list dynamically, based on the
availability presented in the CSR function table. This new approach
will reflect a correct list of CSRs that QEMU actually implements.
[1] https://sourceware.org/gdb/current/onlinedocs/gdb/RISC_002dV-Features.html#RISC_002dV-Features
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210116054123.5457-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In preparation to generate the CSR register list for GDB stub
dynamically, let's add the CSR name in the CSR function table.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1610427124-49887-3-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In preparation to generate the CSR register list for GDB stub
dynamically, change csr_ops[] to non-static so that it can be
referenced externally.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1610427124-49887-2-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
