hv_cpuid_check_and_set() does too much:
- Checks if the feature is supported by KVM;
- Checks if all dependencies are enabled;
- Sets the feature bit in cpu->hyperv_features for 'passthrough' mode.
To reduce the complexity, move all the logic except for dependencies
check out of it. Also, in 'passthrough' mode we don't really need to
check dependencies because KVM is supposed to provide a consistent
set anyway.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210608120817.1325125-7-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To make Hyper-V features appear in e.g. QMP query-cpu-model-expansion we
need to expand and set the corresponding CPUID leaves early. Modify
x86_cpu_get_supported_feature_word() to call newly intoduced Hyper-V
specific kvm_hv_get_supported_cpuid() instead of
kvm_arch_get_supported_cpuid(). We can't use kvm_arch_get_supported_cpuid()
as Hyper-V specific CPUID leaves intersect with KVM's.
Note, early expansion will only happen when KVM supports system wide
KVM_GET_SUPPORTED_HV_CPUID ioctl (KVM_CAP_SYS_HYPERV_CPUID).
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210608120817.1325125-6-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently, the only eVMCS version, supported by KVM (and described in TLFS)
is '1'. When Enlightened VMCS feature is enabled, QEMU takes the supported
eVMCS version range (from KVM_CAP_HYPERV_ENLIGHTENED_VMCS enablement) and
puts it to guest visible CPUIDs. When (and if) eVMCS ver.2 appears a
problem on migration is expected: it doesn't seem to be possible to migrate
from a host supporting eVMCS ver.2 to a host, which only support eVMCS
ver.1.
Hardcode eVMCS ver.1 as the result of 'hv-evmcs' enablement for now. Newer
eVMCS versions will have to have their own enablement options (e.g.
'hv-evmcs=2').
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210608120817.1325125-4-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Clarify the fact that 'hv-passthrough' only enables features which are
already known to QEMU and that it overrides all other 'hv-*' settings.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210608120817.1325125-3-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
OSS-Fuzz found sending illegal addresses when querying the write
protection bits triggers an assertion:
qemu-fuzz-i386: hw/sd/sd.c:824: uint32_t sd_wpbits(SDState *, uint64_t): Assertion `wpnum < sd->wpgrps_size' failed.
==11578== ERROR: libFuzzer: deadly signal
#8 0x7ffff628e091 in __assert_fail
#9 0x5555588f1a3c in sd_wpbits hw/sd/sd.c:824:9
#10 0x5555588dd271 in sd_normal_command hw/sd/sd.c:1383:38
#11 0x5555588d777c in sd_do_command hw/sd/sd.c
#12 0x555558cb25a0 in sdbus_do_command hw/sd/core.c💯16
#13 0x555558e02a9a in sdhci_send_command hw/sd/sdhci.c:337:12
#14 0x555558dffa46 in sdhci_write hw/sd/sdhci.c:1187:9
#15 0x5555598b9d76 in memory_region_write_accessor softmmu/memory.c:489:5
Similarly to commit 8573378e62 ("hw/sd: fix out-of-bounds check
for multi block reads"), check the address range before sending
the status of the write protection bits.
Include the qtest reproducer provided by Alexander Bulekov:
$ make check-qtest-i386
...
Running test qtest-i386/fuzz-sdcard-test
qemu-system-i386: ../hw/sd/sd.c:824: sd_wpbits: Assertion `wpnum < sd->wpgrps_size' failed.
Reported-by: OSS-Fuzz (Issue 29225)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/450
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210702155900.148665-4-f4bug@amsat.org>
Multiple commands have to check the address requested is valid.
Extract this code pattern as a new address_in_range() helper, and
log invalid accesses as guest errors.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210624142209.1193073-3-f4bug@amsat.org>
We report the card is in an inconsistent state, but don't precise
in which state it is. Add this information, as it is useful when
debugging problems.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210624142209.1193073-2-f4bug@amsat.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Commit 3fe9a838ec "dp8393x: Always use 32-bit accesses" set .impl.min_access_size
and .impl.max_access_size to 4 to try and fix the Linux jazzsonic driver which uses
32-bit accesses.
The problem with forcing the register access to 32-bit in this way is that since the
dp8393x uses 16-bit registers, a manual endian swap is required for devices on big
endian machines with 32-bit accesses.
For both access sizes and machine endians the QEMU memory API can do the right thing
automatically: all that is needed is to set .impl.min_access_size to 2 to declare that
the dp8393x implements 16-bit registers.
Normally .impl.max_access_size should also be set to 2, however that doesn't quite
work in this case since the register stride is specified using a (dynamic) it_shift
property which is applied during the MMIO access itself. The effect of this is that
for a 32-bit access the memory API performs 2 x 16-bit accesses, but the use of
it_shift within the MMIO access itself causes the register value to be repeated in both
the top 16-bits and bottom 16-bits. The Linux jazzsonic driver expects the stride to be
zero-extended up to access size and therefore fails to correctly detect the dp8393x
device due to the extra data in the top 16-bits.
The solution here is to remove .impl.max_access_size so that the memory API will
correctly zero-extend the 16-bit registers to the access size up to and including
it_shift. Since it_shift is never greater than 2 than this will always do the right
thing for both 16-bit and 32-bit accesses regardless of the machine endian, allowing
the manual endian swap code to be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 3fe9a838ec ("dp8393x: Always use 32-bit accesses")
Message-Id: <20210705214929.17222-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Instead of accessing N registers via a single address_space API
call using a temporary buffer (stored in the device state) and
updating each register, move the address_space call in the
register put/get. The load/store and word size checks are moved
to put/get too. This simplifies a bit, making the code easier
to read.
Co-developed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210710174954.2577195-8-f4bug@amsat.org>
Per the DP83932C datasheet from July 1995:
4.0 SONIC Registers
4.1 THE CAM UNIT
The Content Addressable Memory (CAM) consists of sixteen
48-bit entries for complete address filtering of network
packets. Each entry corresponds to a 48-bit destination
address that is user programmable and can contain any
combination of Multicast or Physical addresses. Each entry
is partitioned into three 16-bit CAM cells accessible
through CAM Address Ports (CAP 2, CAP 1 and CAP 0) with
CAP0 corresponding to the least significant 16 bits of
the Destination Address and CAP2 corresponding to the
most significant bits.
Store the CAM registers as 16-bit as it simplifies the code.
Having now the CAM registers as arrays of 3 uint16_t, we can avoid
using the VMSTATE_BUFFER_UNSAFE macro by using VMSTATE_UINT16_2DARRAY
which is more appropriate. This breaks the migration stream however.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210710174954.2577195-5-f4bug@amsat.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210710174954.2577195-3-f4bug@amsat.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Replace address_space_rw(is_write=1) by address_space_write()
and remove pointless cast.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210710174954.2577195-2-f4bug@amsat.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently when a LOAD CAM command is executed the entries are loaded into the
CAM from memory in order which is incorrect. According to the datasheet the
first entry in the CAM descriptor is the entry index which means that each
descriptor may update any single entry in the CAM rather than the Nth entry.
Decode the CAM entry index and use it store the descriptor in the appropriate
slot in the CAM. This fixes the issue where the MacOS toolbox loads a single
CAM descriptor into the final slot in order to perform a loopback test which
must succeed before the Ethernet port is enabled.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Linking on Haiku OS fails:
/boot/system/develop/tools/bin/../lib/gcc/x86_64-unknown-haiku/8.3.0/../../../../x86_64-unknown-haiku/bin/ld:
error: libqemu-mips-softmmu.fa.p/target_mips_tcg_sysemu_mips-semi.c.o(.rodata) is too large (0xffff405a bytes)
/boot/system/develop/tools/bin/../lib/gcc/x86_64-unknown-haiku/8.3.0/../../../../x86_64-unknown-haiku/bin/ld:
final link failed: memory exhausted
collect2: error: ld returned 1 exit status
This is because the host_to_mips_errno[] uses errno as index,
for example:
static const uint16_t host_to_mips_errno[] = {
[ENAMETOOLONG] = 91,
...
and Haiku defines [*] ENAMETOOLONG as:
12 /* Error baselines */
13 #define B_GENERAL_ERROR_BASE INT_MIN
..
22 #define B_STORAGE_ERROR_BASE (B_GENERAL_ERROR_BASE + 0x6000)
...
106 #define B_NAME_TOO_LONG (B_STORAGE_ERROR_BASE + 4)
...
211 #define ENAMETOOLONG B_TO_POSIX_ERROR(B_NAME_TOO_LONG)
so the array ends up beeing indeed too big.
Since POSIX errno can't be use as indexes on Haiku,
rewrite errno_mips() using a switch statement.
[*] https://github.com/haiku/haiku/blob/r1beta3/headers/os/support/Errors.h#L130
Reported-by: Richard Zak <richard.j.zak@gmail.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210706130723.1178961-1-f4bug@amsat.org>
Introduce the SQ opcode (Store Quadword).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-27-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Introduce the LQ opcode (Load Quadword) and remove unreachable code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-26-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Introduce the PPACW opcode (Parallel Pack to Word).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-22-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Introduce the 'Parallel Compare for Greater Than' opcodes:
- PCGTB (Parallel Compare for Greater Than Byte)
- PCGTH (Parallel Compare for Greater Than Halfword)
- PCGTW (Parallel Compare for Greater Than Word)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210309145653.743937-15-f4bug@amsat.org>
Introduce the PEXTUW opcode (Parallel Extend Upper from Word).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210309145653.743937-12-f4bug@amsat.org>
Rather than using the magic 0x80000000 number for the PCI I/O BAR
physical address on the main system bus, use a definition.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210417103028.601124-6-f4bug@amsat.org>
The ASIC PCI bridge chipset from Motorola is named 'Raven'.
This chipset is used in the PowerPC Reference Platform (PReP),
but not restricted to it. Rename it accordingly.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210417103028.601124-5-f4bug@amsat.org>
Move some ADC file to where they belong and move some sensors to a
sensor directory, since with new BMCs coming in lots of different
sensors should be coming in. Keep from cluttering things up.
Add support for I2C PMBus devices.
Replace the confusing and error-prone i2c_send_recv and i2c_transfer with
specific send and receive functions. Several errors have already been
made with these, avoid any new errors.
Fix the watchdog_expired field in the IPMI watchdog, it's not a bool,
it's a u8. After a vmstate transfer, the new value could be wrong.
-----BEGIN PGP SIGNATURE-----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=8708
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into staging
Some qemu updates for IPMI and I2C
Move some ADC file to where they belong and move some sensors to a
sensor directory, since with new BMCs coming in lots of different
sensors should be coming in. Keep from cluttering things up.
Add support for I2C PMBus devices.
Replace the confusing and error-prone i2c_send_recv and i2c_transfer with
specific send and receive functions. Several errors have already been
made with these, avoid any new errors.
Fix the watchdog_expired field in the IPMI watchdog, it's not a bool,
it's a u8. After a vmstate transfer, the new value could be wrong.
# gpg: Signature made Fri 09 Jul 2021 17:25:04 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81
* remotes/cminyard/tags/for-qemu-6.1-2: (24 commits)
tests/qtest: add tests for MAX34451 device model
hw/misc: add MAX34451 device
tests/qtest: add tests for ADM1272 device model
hw/misc: add ADM1272 device
hw/i2c: add support for PMBus
ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct
hw/i2c: Introduce i2c_start_recv() and i2c_start_send()
hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer()
hw/i2c: Make i2c_start_transfer() direction argument a boolean
hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address()
hw/i2c: Remove confusing i2c_send_recv()
hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/misc/auxbus: Replace 'is_write' boolean by its value
hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases
hw/misc/auxbus: Fix MOT/classic I2C mode
hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/i2c/ppc4xx_i2c: Add reference to datasheet
hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/display/sm501: Simplify sm501_i2c_write() logic
hw/input/lm832x: Define TYPE_LM8323 in public header
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Make blockdev-reopen stable
- Remove deprecated qemu-img backing file without format
- rbd: Convert to coroutines and add write zeroes support
- rbd: Updated MAINTAINERS
- export/fuse: Allow other users access to the export
- vhost-user: Fix backends without multiqueue support
- Fix drive-backup transaction endless drained section
-----BEGIN PGP SIGNATURE-----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=kH+r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
- Make blockdev-reopen stable
- Remove deprecated qemu-img backing file without format
- rbd: Convert to coroutines and add write zeroes support
- rbd: Updated MAINTAINERS
- export/fuse: Allow other users access to the export
- vhost-user: Fix backends without multiqueue support
- Fix drive-backup transaction endless drained section
# gpg: Signature made Fri 09 Jul 2021 13:49:22 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (28 commits)
block: Make blockdev-reopen stable API
iotests: Test reopening multiple devices at the same time
block: Support multiple reopening with x-blockdev-reopen
block: Acquire AioContexts during bdrv_reopen_multiple()
block: Add bdrv_reopen_queue_free()
qcow2: Fix dangling pointer after reopen for 'file'
qemu-img: Improve error for rebase without backing format
qemu-img: Require -F with -b backing image
qcow2: Prohibit backing file changes in 'qemu-img amend'
blockdev: fix drive-backup transaction endless drained section
vhost-user: Fix backends without multiqueue support
MAINTAINERS: add block/rbd.c reviewer
block/rbd: fix type of task->complete
iotests/fuse-allow-other: Test allow-other
iotests/308: Test +w on read-only FUSE exports
export/fuse: Let permissions be adjustable
export/fuse: Give SET_ATTR_SIZE its own branch
export/fuse: Add allow-other option
export/fuse: Pass default_permissions for mount
util/uri: do not check argument of uri_free()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's a (probably) final pull request before the qemu-6.1 soft
freeze. Includes:
* Implementation of the new H_RPT_INVALIDATE hypercall
* Virtual Open Firmware for pSeries and pegasos2 machine types.
This is an experimental minimal Open Firmware implementation which
works by delegating nearly everything to qemu itself via a special
hypercall.
* A number of cleanups to the ppc soft MMU code
* Fix to handling of two-level radix mode translations for the
powernv machine type
* Update the H_GET_CPU_CHARACTERISTICS call with newly defined bits.
This will allow more flexible handling of possible future CPU
Spectre-like flaws
* Correctly treat mtmsrd as an illegal instruction on BookE cpus
* Firmware update for the ppce500 machine type
-----BEGIN PGP SIGNATURE-----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=9cX3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210709' into staging
ppc patch queue 2021-07-09
Here's a (probably) final pull request before the qemu-6.1 soft
freeze. Includes:
* Implementation of the new H_RPT_INVALIDATE hypercall
* Virtual Open Firmware for pSeries and pegasos2 machine types.
This is an experimental minimal Open Firmware implementation which
works by delegating nearly everything to qemu itself via a special
hypercall.
* A number of cleanups to the ppc soft MMU code
* Fix to handling of two-level radix mode translations for the
powernv machine type
* Update the H_GET_CPU_CHARACTERISTICS call with newly defined bits.
This will allow more flexible handling of possible future CPU
Spectre-like flaws
* Correctly treat mtmsrd as an illegal instruction on BookE cpus
* Firmware update for the ppce500 machine type
# gpg: Signature made Fri 09 Jul 2021 06:16:42 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/ppc-for-6.1-20210709: (33 commits)
target/ppc: Support for H_RPT_INVALIDATE hcall
linux-headers: Update
spapr: Fix implementation of Open Firmware client interface
target/ppc: Don't compile ppc_tlb_invalid_all without TCG
ppc/pegasos2: Implement some RTAS functions with VOF
ppc/pegasos2: Fix use of && instead of &
ppc/pegasos2: Use Virtual Open Firmware as firmware replacement
target/ppc/spapr: Update H_GET_CPU_CHARACTERISTICS L1D cache flush bits
target/ppc: Allow virtual hypervisor on CPU without HV
ppc/pegasos2: Introduce Pegasos2MachineState structure
target/ppc: mtmsrd is an illegal instruction on BookE
spapr: Implement Open Firmware client interface
docs/system: ppc: Update ppce500 documentation with eTSEC support
roms/u-boot: Bump ppce500 u-boot to v2021.07 to add eTSEC support
target/ppc: change ppc_hash32_xlate to use mmu_idx
target/ppc: introduce mmu-books.h
target/ppc: changed ppc_hash64_xlate to use mmu_idx
target/ppc: fix address translation bug for radix mmus
target/ppc: Fix compilation with DEBUG_BATS debug option
target/ppc: Fix compilation with FLUSH_ALL_TLBS debug option
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since 6eea04347e, all tcg backends support goto_ptr.
Remove the conditional, making support mandatory.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out CPU_LOG_EXEC and CPU_LOG_TB_CPU logging from
cpu_tb_exec to a new function. Perform only one pc
range check after a combined mask check.
Use the new function in lookup_tb_ptr. This enables
CPU_LOG_TB_CPU between indirectly chained tbs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we've moved helper_lookup_tb_ptr, the only user
of tb-lookup.h is cpu-exec.c; merge the contents in.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will allow additional code sharing.
No functional change.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The loop is performing a simple boolean test for the existence
of a BP_CPU breakpoint at EIP. Plus it gets the iteration wrong,
if we happen to have a BP_GDB breakpoint at the same address.
We have a function for this: cpu_breakpoint_test.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210620062317.1399034-1-richard.henderson@linaro.org>
In tcg_region_prologue_set, we reset TCGContext.code_gen_ptr.
So do that after we've used it to dump the prologue contents.
Fixes: b0a0794a0f
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We know that in the body of this if statement i is less than len, so
we really should be copying len - i bytes not i - len bytes.
Fix this typo.
Fixes: 8d8404f156 ("util: Add qemu_guest_getrandom and associated routines")
Signed-off-by: Mark Nelson <mdnelson8@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210709120600.11080-1-mdnelson8@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fixes commit 3d0684b2ad ("ram: Update
all functions comments")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210708162159.18045-1-olaf@aepfle.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The errno numbers are very large on Haiku, so the linking currently
fails there with a "final link failed: memory exhausted" error
message. We should not use the errno number as array indexes here,
thus convert the code to a switch-case statement instead. A clever
compiler should be able to optimize this code in a similar way
anway.
Reported-by: Richard Zak <richard.j.zak@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210706081822.1316551-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
