32-bit targets by definition do not support long mode; therefore, the
bit must be masked in the features supported by the accelerator.
As a side effect, this avoids setting up the 0x80000008 CPUID leaf
for
qemu-system-i386 -cpu host
which since commit 5a140b255d ("x86/cpu: Use max host physical address
if -cpu max option is applied") would have printed this error:
qemu-system-i386: phys-bits should be between 32 and 36 (but is 48)
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio-9p devices are often used to expose a virtual-filesystem to the
guest. There have been some bugs reported in this device, such as
CVE-2018-19364, and CVE-2021-20181. We should fuzz this device
This patch adds two virtio-9p configurations:
* One with the widely used -fsdev local driver. This driver leaks some
state in the form of files/directories created in the shared dir.
* One with the synth driver. While it is not used in the real world, this
driver won't leak leak state between fuzz inputs.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20210117230924.449676-4-alxndr@bu.edu>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20210117230924.449676-3-alxndr@bu.edu>
For some device configurations, it is useful to configure some
resources, and adjust QEMU arguments at runtime, prior to fuzzing. This
patch adds an "argfunc" to generic the generic_fuzz_config. When
specified, it is responsible for configuring the resources and returning
a string containing the corresponding QEMU arguments. This can be useful
for targets that rely on e.g.:
* a temporary qcow2 image
* a temporary directory
* an unused TCP port used to bind the VNC server
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210117230924.449676-2-alxndr@bu.edu>
This is useful for building reproducers. Instead checking the code or
the QEMU_FUZZ_ARGS, the arguments are at the top of the crash log.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210117201014.271610-3-alxndr@bu.edu>
Disks work differently depending on the x86 machine type (SATA vs PATA).
Additionally, we should fuzz the atapi code paths, which might contain
vulnerabilities such as CVE-2020-29443. This patch adds hard-disk and
cdrom generic-fuzzer configs for both the pc (PATA) and q35 (SATA)
machine types.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20210120152211.109782-1-alxndr@bu.edu>
We passed an is_write flag to the fuzz_dma_read_cb function to
differentiate between the mapped DMA regions that need to be populated
with fuzzed data, and those that don't. We simply passed through the
address_space_map is_write parameter. The goal was to cut down on
unnecessarily populating mapped DMA regions, when they are not read
from.
Unfortunately, nothing precludes code from reading from regions mapped
with is_write=true. For example, see:
https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg04729.html
This patch removes the is_write parameter to fuzz_dma_read_cb. As a
result, we will fill all mapped DMA regions with fuzzed data, ignoring
the specified transfer direction.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20210120060255.558535-1-alxndr@bu.edu>
A number of hardware platforms are implementing mechanisms whereby the
hypervisor does not have unfettered access to guest memory, in order
to mitigate the security impact of a compromised hypervisor.
AMD's SEV implements this with in-cpu memory encryption, and Intel has
its own memory encryption mechanism. POWER has an upcoming mechanism
to accomplish this in a different way, using a new memory protection
level plus a small trusted ultravisor. s390 also has a protected
execution environment.
The current code (committed or draft) for these features has each
platform's version configured entirely differently. That doesn't seem
ideal for users, or particularly for management layers.
AMD SEV introduces a notionally generic machine option
"machine-encryption", but it doesn't actually cover any cases other
than SEV.
This series is a proposal to at least partially unify configuration
for these mechanisms, by renaming and generalizing AMD's
"memory-encryption" property. It is replaced by a
"confidential-guest-support" property pointing to a platform specific
object which configures and manages the specific details.
Note to Ram Pai: the documentation I've included for PEF is very
minimal. If you could send a patch expanding on that, it would be
very helpful.
Changes since v8:
* Rebase
* Fixed some cosmetic typos
Changes since v7:
* Tweaked and clarified meaning of the 'ready' flag
* Polished the interface to the PEF internals
* Shifted initialization for s390 PV later (I hope I've finally got
this after apply_cpu_model() where it needs to be)
Changes since v6:
* Moved to using OBJECT_DECLARE_TYPE and OBJECT_DEFINE_TYPE macros
* Assorted minor fixes
Changes since v5:
* Renamed from "securable guest memory" to "confidential guest
support"
* Simpler reworking of x86 boot time flash encryption
* Added a bunch of documentation
* Fixed some compile errors on POWER
Changes since v4:
* Renamed from "host trust limitation" to "securable guest memory",
which I think is marginally more descriptive
* Re-organized initialization, because the previous model called at
kvm_init didn't work for s390
* Assorted fixes to the s390 implementation; rudimentary testing
(gitlab CI) only
Changes since v3:
* Rebased
* Added first cut at handling of s390 protected virtualization
Changes since RFCv2:
* Rebased
* Removed preliminary SEV cleanups (they've been merged)
* Changed name to "host trust limitation"
* Added migration blocker to the PEF code (based on SEV's version)
Changes since RFCv1:
* Rebased
* Fixed some errors pointed out by Dave Gilbert
-----BEGIN PGP SIGNATURE-----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=TTeT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dg-gitlab/tags/cgs-pull-request' into staging
Generalize memory encryption models
A number of hardware platforms are implementing mechanisms whereby the
hypervisor does not have unfettered access to guest memory, in order
to mitigate the security impact of a compromised hypervisor.
AMD's SEV implements this with in-cpu memory encryption, and Intel has
its own memory encryption mechanism. POWER has an upcoming mechanism
to accomplish this in a different way, using a new memory protection
level plus a small trusted ultravisor. s390 also has a protected
execution environment.
The current code (committed or draft) for these features has each
platform's version configured entirely differently. That doesn't seem
ideal for users, or particularly for management layers.
AMD SEV introduces a notionally generic machine option
"machine-encryption", but it doesn't actually cover any cases other
than SEV.
This series is a proposal to at least partially unify configuration
for these mechanisms, by renaming and generalizing AMD's
"memory-encryption" property. It is replaced by a
"confidential-guest-support" property pointing to a platform specific
object which configures and manages the specific details.
Note to Ram Pai: the documentation I've included for PEF is very
minimal. If you could send a patch expanding on that, it would be
very helpful.
Changes since v8:
* Rebase
* Fixed some cosmetic typos
Changes since v7:
* Tweaked and clarified meaning of the 'ready' flag
* Polished the interface to the PEF internals
* Shifted initialization for s390 PV later (I hope I've finally got
this after apply_cpu_model() where it needs to be)
Changes since v6:
* Moved to using OBJECT_DECLARE_TYPE and OBJECT_DEFINE_TYPE macros
* Assorted minor fixes
Changes since v5:
* Renamed from "securable guest memory" to "confidential guest
support"
* Simpler reworking of x86 boot time flash encryption
* Added a bunch of documentation
* Fixed some compile errors on POWER
Changes since v4:
* Renamed from "host trust limitation" to "securable guest memory",
which I think is marginally more descriptive
* Re-organized initialization, because the previous model called at
kvm_init didn't work for s390
* Assorted fixes to the s390 implementation; rudimentary testing
(gitlab CI) only
Changes since v3:
* Rebased
* Added first cut at handling of s390 protected virtualization
Changes since RFCv2:
* Rebased
* Removed preliminary SEV cleanups (they've been merged)
* Changed name to "host trust limitation"
* Added migration blocker to the PEF code (based on SEV's version)
Changes since RFCv1:
* Rebased
* Fixed some errors pointed out by Dave Gilbert
# gpg: Signature made Mon 08 Feb 2021 06:07:27 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/cgs-pull-request:
s390: Recognize confidential-guest-support option
confidential guest support: Alter virtio default properties for protected guests
spapr: PEF: prevent migration
spapr: Add PEF based confidential guest support
confidential guest support: Update documentation
confidential guest support: Move SEV initialization into arch specific code
confidential guest support: Introduce cgs "ready" flag
sev: Add Error ** to sev_kvm_init()
confidential guest support: Rework the "memory-encryption" property
confidential guest support: Move side effect out of machine_set_memory_encryption()
sev: Remove false abstraction of flash encryption
confidential guest support: Introduce new confidential guest support class
qom: Allow optional sugar props
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At least some s390 cpu models support "Protected Virtualization" (PV),
a mechanism to protect guests from eavesdropping by a compromised
hypervisor.
This is similar in function to other mechanisms like AMD's SEV and
POWER's PEF, which are controlled by the "confidential-guest-support"
machine option. s390 is a slightly special case, because we already
supported PV, simply by using a CPU model with the required feature
(S390_FEAT_UNPACK).
To integrate this with the option used by other platforms, we
implement the following compromise:
- When the confidential-guest-support option is set, s390 will
recognize it, verify that the CPU can support PV (failing if not)
and set virtio default options necessary for encrypted or protected
guests, as on other platforms. i.e. if confidential-guest-support
is set, we will either create a guest capable of entering PV mode,
or fail outright.
- If confidential-guest-support is not set, guests might still be
able to enter PV mode, if the CPU has the right model. This may be
a little surprising, but shouldn't actually be harmful.
To start a guest supporting Protected Virtualization using the new
option use the command line arguments:
-object s390-pv-guest,id=pv0 -machine confidential-guest-support=pv0
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
The default behaviour for virtio devices is not to use the platforms normal
DMA paths, but instead to use the fact that it's running in a hypervisor
to directly access guest memory. That doesn't work if the guest's memory
is protected from hypervisor access, such as with AMD's SEV or POWER's PEF.
So, if a confidential guest mechanism is enabled, then apply the
iommu_platform=on option so it will go through normal DMA mechanisms.
Those will presumably have some way of marking memory as shared with
the hypervisor or hardware so that DMA will work.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
We haven't yet implemented the fairly involved handshaking that will be
needed to migrate PEF protected guests. For now, just use a migration
blocker so we get a meaningful error if someone attempts this (this is the
same approach used by AMD SEV).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Some upcoming POWER machines have a system called PEF (Protected
Execution Facility) which uses a small ultravisor to allow guests to
run in a way that they can't be eavesdropped by the hypervisor. The
effect is roughly similar to AMD SEV, although the mechanisms are
quite different.
Most of the work of this is done between the guest, KVM and the
ultravisor, with little need for involvement by qemu. However qemu
does need to tell KVM to allow secure VMs.
Because the availability of secure mode is a guest visible difference
which depends on having the right hardware and firmware, we don't
enable this by default. In order to run a secure guest you need to
create a "pef-guest" object and set the confidential-guest-support
property to point to it.
Note that this just *allows* secure guests, the architecture of PEF is
such that the guest still needs to talk to the ultravisor to enter
secure mode. Qemu has no direct way of knowing if the guest is in
secure mode, and certainly can't know until well after machine
creation time.
To start a PEF-capable guest, use the command line options:
-object pef-guest,id=pef0 -machine confidential-guest-support=pef0
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Now that we've implemented a generic machine option for configuring various
confidential guest support mechanisms:
1. Update docs/amd-memory-encryption.txt to reference this rather than
the earlier SEV specific option
2. Add a docs/confidential-guest-support.txt to cover the generalities of
the confidential guest support scheme
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
While we've abstracted some (potential) differences between mechanisms for
securing guest memory, the initialization is still specific to SEV. Given
that, move it into x86's kvm_arch_init() code, rather than the generic
kvm_init() code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
The platform specific details of mechanisms for implementing
confidential guest support may require setup at various points during
initialization. Thus, it's not really feasible to have a single cgs
initialization hook, but instead each mechanism needs its own
initialization calls in arch or machine specific code.
However, to make it harder to have a bug where a mechanism isn't
properly initialized under some circumstances, we want to have a
common place, late in boot, where we verify that cgs has been
initialized if it was requested.
This patch introduces a ready flag to the ConfidentialGuestSupport
base type to accomplish this, which we verify in
qemu_machine_creation_done().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
This allows failures to be reported richly and idiomatically.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Currently the "memory-encryption" property is only looked at once we
get to kvm_init(). Although protection of guest memory from the
hypervisor isn't something that could really ever work with TCG, it's
not conceptually tied to the KVM accelerator.
In addition, the way the string property is resolved to an object is
almost identical to how a QOM link property is handled.
So, create a new "confidential-guest-support" link property which sets
this QOM interface link directly in the machine. For compatibility we
keep the "memory-encryption" property, but now implemented in terms of
the new property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
When the "memory-encryption" property is set, we also disable KSM
merging for the guest, since it won't accomplish anything.
We want that, but doing it in the property set function itself is
thereoretically incorrect, in the unlikely event of some configuration
environment that set the property then cleared it again before
constructing the guest.
More importantly, it makes some other cleanups we want more difficult.
So, instead move this logic to machine_run_board_init() conditional on
the final value of the property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
When AMD's SEV memory encryption is in use, flash memory banks (which are
initialed by pc_system_flash_map()) need to be encrypted with the guest's
key, so that the guest can read them.
That's abstracted via the kvm_memcrypt_encrypt_data() callback in the KVM
state.. except, that it doesn't really abstract much at all.
For starters, the only call site is in code specific to the 'pc'
family of machine types, so it's obviously specific to those and to
x86 to begin with. But it makes a bunch of further assumptions that
need not be true about an arbitrary confidential guest system based on
memory encryption, let alone one based on other mechanisms:
* it assumes that the flash memory is defined to be encrypted with the
guest key, rather than being shared with hypervisor
* it assumes that that hypervisor has some mechanism to encrypt data into
the guest, even though it can't decrypt it out, since that's the whole
point
* the interface assumes that this encrypt can be done in place, which
implies that the hypervisor can write into a confidential guests's
memory, even if what it writes isn't meaningful
So really, this "abstraction" is actually pretty specific to the way SEV
works. So, this patch removes it and instead has the PC flash
initialization code call into a SEV specific callback.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Several architectures have mechanisms which are designed to protect
guest memory from interference or eavesdropping by a compromised
hypervisor. AMD SEV does this with in-chip memory encryption and
Intel's TDX can do similar things. POWER's Protected Execution
Framework (PEF) accomplishes a similar goal using an ultravisor and
new memory protection features, instead of encryption.
To (partially) unify handling for these, this introduces a new
ConfidentialGuestSupport QOM base class. "Confidential" is kind of vague,
but "confidential computing" seems to be the buzzword about these schemes,
and "secure" or "protected" are often used in connection to unrelated
things (such as hypervisor-from-guest or guest-from-guest security).
The "support" in the name is significant because in at least some of the
cases it requires the guest to take specific actions in order to protect
itself from hypervisor eavesdropping.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Global properties have an @optional field, which allows to apply a given
property to a given type even if one of its subclasses doesn't support
it. This is especially used in the compat code when dealing with the
"disable-modern" and "disable-legacy" properties and the "virtio-pci"
type.
Allow object_register_sugar_prop() to set this field as well.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159738953558.377274.16617742952571083440.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Rewrite the existing VMSTATE_FIFO8 macro to use VMSTATE_FIFO8_TEST as per the
standard pattern in include/migration/vmstate.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210128221728.14887-3-mark.cave-ayland@ilande.co.uk>
Developer errors are better represented with assert() rather than abort(). Also
improve the strictness of the checks by using range checks within the assert()
rather than converting the existing equality checks to inequality checks.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210121102518.20112-1-mark.cave-ayland@ilande.co.uk>
add a new optional interface to CPUClass, which allows accelerators
to extend the CPUClass with additional accelerator-specific
initializations.
This will allow to separate the target cpu code that is specific
to each accelerator, and register it automatically with object
hierarchy lookup depending on accelerator code availability,
as part of the accel_init_interfaces() initialization step.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-19-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will allow us to centralize the registration of
the cpus.c module accelerator operations (in accel/accel-softmmu.c),
and trigger it automatically using object hierarchy lookup from the
new accel_init_interfaces() initialization step, depending just on
which accelerators are available in the code.
Rename all tcg-cpus.c, kvm-cpus.c, etc to tcg-accel-ops.c,
kvm-accel-ops.c, etc, matching the object type names.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-18-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
commit 568496c0c0 ("cpu: Add callback to check architectural") and
commit 3826121d92 ("target-arm: Implement checking of fired")
introduced an ARM-specific hack for cpu_check_watchpoint.
Make debug_check_watchpoint optional, and move it to tcg_ops.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-15-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
commit 4061200059 ("arm: Correctly handle watchpoints for BE32 CPUs")
introduced this ARM-specific, TCG-specific hack to adjust the address,
before checking it with cpu_check_watchpoint.
Make adjust_watchpoint_address optional and move it to tcg_ops.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-14-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
make it consistently SOFTMMU-only.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: make the field presence in cpu.h unconditional, removing the ifdefs]
Message-Id: <20210204163931.7358-12-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: wrap target code around CONFIG_TCG and !CONFIG_USER_ONLY]
avoiding its use in headers used by common_ss code (should be poisoned).
Note: need to be careful with the use of CONFIG_USER_ONLY,
Message-Id: <20210204163931.7358-11-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cc->do_interrupt is in theory a TCG callback used in accel/tcg only,
to prepare the emulated architecture to take an interrupt as defined
in the hardware specifications,
but in reality the _do_interrupt style of functions in targets are
also occasionally reused by KVM to prepare the architecture state in a
similar way where userspace code has identified that it needs to
deliver an exception to the guest.
In the case of ARM, that includes:
1) the vcpu thread got a SIGBUS indicating a memory error,
and we need to deliver a Synchronous External Abort to the guest to
let it know about the error.
2) the kernel told us about a debug exception (breakpoint, watchpoint)
but it is not for one of QEMU's own gdbstub breakpoints/watchpoints
so it must be a breakpoint the guest itself has set up, therefore
we need to deliver it to the guest.
So in order to reuse code, the same arm_do_interrupt function is used.
This is all fine, but we need to avoid calling it using the callback
registered in CPUClass, since that one is now TCG-only.
Fortunately this is easily solved by replacing calls to
CPUClass::do_interrupt() with explicit calls to arm_do_interrupt().
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210204163931.7358-9-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
move away TCG-only code, make it compile only on TCG.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: moved the prototypes from hw/core/cpu.h to exec/cpu-all.h]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-4-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
for now only TCG is allowed as an accelerator for riscv,
so remove the CONFIG_TCG use.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-3-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCG-specific CPU methods will be moved to a separate struct,
to make it easier to move accel-specific code outside generic CPU
code in the future. Start by moving tcg_initialize().
The new CPUClass.tcg_opts field may eventually become a pointer,
but keep it an embedded struct for now, to make code conversion
easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[claudio: move TCGCpuOperations inside include/hw/core/cpu.h]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-2-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict all operands to registers. All constants will be forced
into registers by the middle-end. Removing the difference in how
immediate integers were encoded will allow more code to be shared
between 32-bit and 64-bit operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This was removed from tcg_target_reg_alloc_order and
tcg_target_call_iarg_regs on the assumption that it
was the stack. This was incorrectly copied from i386.
For tci, the stack is R15.
By adding R4 back to tcg_target_call_iarg_regs, adjust the other
entries so that 6 (or 12) entries are still present in the array,
and adjust the numbers in the interpreter.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As noted in several comments, 8 regs is not enough for 32-bit
to perform calls, as currently implemented. Shortly, we will
rearrange the encoding which will make 32 regs impossible.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Trivially implemented like other arithmetic.
Tested via check-tcg and the ppc64 target.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not simultaneously support div and div2 -- it's one
or the other. TCI is already using div, so remove div2.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Paolo Bonzini
Alexander Bulekov
Peter Maydell
David Gibson
Greg Kurz
Mark Cave-Ayland
Claudio Fontana
Eduardo Habkost
Richard Henderson