Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark these as a non-streaming instructions, which should trap
if full a64 support is not enabled in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark ADR as a non-streaming instruction, which should trap
if full a64 support is not enabled in streaming mode.
Removing entries from sme-fa64.decode is an easy way to see
what remains to be done.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This new behaviour is in the ARM pseudocode function
AArch64.CheckFPAdvSIMDEnabled, which applies to AArch32
via AArch32.CheckAdvSIMDOrFPEnabled when the EL to which
the trap would be delivered is in AArch64 mode.
Given that ARMv9 drops support for AArch32 outside EL0, the trap EL
detection ought to be trivially true, but the pseudocode still contains
a number of conditions, and QEMU has not yet committed to dropping A32
support for EL[12] when v9 features are present.
Since the computation of SME_TRAP_NONSTREAMING is necessarily different
for the two modes, we might as well preserve bits within TBFLAG_ANY and
allocate separate bits within TBFLAG_A32 and TBFLAG_A64 instead.
Note that DDI0616A.a has typos for bits [22:21] of LD1RO in the table
of instructions illegal in streaming mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes the build rules for the decoder, and the
new file for translation, but excludes any instructions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dump SVCR, plus use the correct access check for Streaming Mode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220708151540.18136-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 45f1eecdd6 removed the dependency
from configure to pc-bios
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624150258.50449-1-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function doesn't release descriptors in one error path,
result in memory leak. Call g_free() to release it.
Fixes: cc01a3f4ca ("kvm: Support for querying fd-based stats")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Message-Id: <20220624063159.57411-1-linmq006@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit c9c847481 broken dbus audio module compilation with bad
'CONFIG_GIO' usage. Furthermore, it implied extra dependency on audio
module which aren't necessary.
The problem was that 'dbus_display' is not correctly automatically set
on MacOS, because opengl dependency wasn't taken into account.
Fixes: c9c847481 ("audio/dbus: Fix building with modules on macOS")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220622154918.560870-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The non-generic-fuzz targets often time-out, or run out of memory.
Additionally, they create unreproducible bug-reports. It is possible
that this is resulting in failing coverage-reports on OSS-Fuzz. In the
future, these test-cases should be fixed, or removed.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20220623125505.2137534-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The sancov filter check still fails when unused arguments are treated as
errors. To work around that, add a SanitizerCoverage flag to the
build-check.
Fixes: aa4f3a3b88 ("build: fix check for -fsanitize-coverage-allowlist")
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20220621204507.698711-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Configure is trying to fall back on cross compilers for targets that
can have bi-arch or bi-endian toolchains, but there are many corner
cases where just checking the name can go wrong. For example, the RHEL
ppc64le compiler is bi-arch and bi-endian, but multilibs are disabled.
Therefore it cannot be used to build 32-bit hosted binaries like the
linux-user TCG tests.
Trying the cross compiler first also does not work, and an example for
this is also ppc64le. The powerpc64-linux-gnu-gcc binary from the
cross-gcc package is theoretically multilib-friendly, but it cannot
find the CRT files on a ppc64le host, because they are not in the .../le
multilib subdirectory.
This can be fixed by testing both the native compiler and the cross
compiler, and proceeding with the first one that works. To do this,
move the compiler usability check from the tests/tcg snippet to inside
probe_target_compiler and, while at it, restrict the softmmu emulation
target to basically a test for the presence of libgcc.
Tested-by: Matheus Kowalczuk Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let probe_target_compiler know if it is looking for a compiler for a
softmmu (freestanding) or a linux-user (hosted) environment. The
detection for the compiler has to be done differently in the two
cases.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix booting from devices that use 4k sectors, but are not like DASDs
* Re-evaluate pending interrupts after EXECUTE of certain instructions
-----BEGIN PGP SIGNATURE-----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=UsTi
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-07-07' of https://gitlab.com/thuth/qemu into staging
* Check validity of the address in the SET PREFIX instruction
* Fix booting from devices that use 4k sectors, but are not like DASDs
* Re-evaluate pending interrupts after EXECUTE of certain instructions
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmLGhkURHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbU76Q//Y4mEXxWZDpJTg7tL5SZP+UzBVttnCifv
# 6q+2I0keOUs6wFhPq8TzBqkazT9wlv51cNrY2Q3fU9I3dpDeRbAXZR34UD4kw5an
# Q+ZQcebuGSKLjzMrIb1DLAieq8OmZR5FvDUu16BbeJr6GIQIE80lMRfWh9j30UfW
# tlxkXr15BnyPx6m0rSGwzkZD2vgfj5zSUrDtYJcUsfypIA9OOBMA7yNGNlO+d94V
# UZiKgNQtAoBNm4hZh2M86nsUtem+WpMTZQnDnCpMLYvFV/u9jRQBFSR+Ay41hcEN
# WYuLK61rkjc9gPWSjeNNT28x8RMvFJU4YNn1UDiMRSzrigxeui6MOW3SI/h3y6tI
# 94yXmXV2IuDMibvOjK07nkDaEItqPxfj6zuM2xW1Nc+l8Sk12korFBpk/AZiD0Jo
# R3u36efci3zNqDRDJvhGUv8sGcv0mwO7Agq1Bm3h5941gYwzQKILHCShL7DPzvQa
# h+K1MsT7vWfh5++unkGUrN/Zd9CazEylbDuWtywK8lgQcTGDO/9rab8GeXfH/5es
# Tp0RGJwxmalgrAHZPK9lqgpQaGw92ct2G5odvc82EXQhgccnN9mh54BHPfdKs95E
# JZVrXtZH3Gtgl5MGZ+yJevWSc9h1iRnRF4a7QC3UlVBjA/9yAWzQUAnNGZOamE/s
# F+pi89oWLn8=
# =UsTi
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Jul 2022 12:37:49 PM +0530
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-07-07' of https://gitlab.com/thuth/qemu:
target/s390x: Exit tb after executing ex_value
target/s390x: Remove DISAS_PC_STALE_NOCHAIN
target/s390x: Remove DISAS_PC_STALE
target/s390x: Remove DISAS_GOTO_TB
pc-bios/s390-ccw: Update the s390-ccw bios binaries with the virtio-blk fixes
pc-bios/s390-ccw/netboot.mak: Ignore Clang's warnings about GNU extensions
pc-bios/s390-ccw/virtio: Remove "extern" keyword from prototypes
pc-bios/s390-ccw/virtio-blkdev: Request the right feature bits
pc-bios/s390-ccw: Split virtio-scsi code from virtio_blk_setup_device()
pc-bios/s390-ccw/virtio: Beautify the code for reading virtqueue configuration
pc-bios/s390-ccw/virtio: Read device config after feature negotiation
pc-bios/s390-ccw/virtio: Set missing status bits while initializing
pc-bios/s390-ccw/virtio-blkdev: Remove virtio_assume_scsi()
pc-bios/s390-ccw/virtio-blkdev: Simplify/fix virtio_ipl_disk_is_valid()
pc-bios/s390-ccw/bootmap: Improve the guessing logic in zipl_load_vblk()
pc-bios/s390-ccw/virtio: Introduce a macro for the DASD block size
pc-bios/s390-ccw: Add a proper prototype for main()
target/s390x/tcg: SPX: check validity of new prefix
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit 39a1fd2528 we fixed a bug in the handling of LPAE block
descriptors where we weren't correctly zeroing out some RES0 bits.
However this fix has a bug because the calculation of the mask is
done at the wrong width: in
descaddr &= ~(page_size - 1);
page_size is a target_ulong, so in the 'qemu-system-arm' binary it is
only 32 bits, and the effect is that we always zero out the top 32
bits of the calculated address. Fix the calculation by forcing the
mask to be calculated with the same type as descaddr.
This only affects 32-bit CPUs which support LPAE (e.g. cortex-a15)
when used on board models which put RAM or devices above the 4GB
mark and when the 'qemu-system-arm' executable is being used.
It was also masked in 7.0 by the main bug reported in
https://gitlab.com/qemu-project/qemu/-/issues/1078 where the
virt board incorrectly does not enable 'highmem' for 32-bit CPUs.
The workaround is to use 'qemu-system-aarch64' with the same
command line.
Reported-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220627134620.3190252-1-peter.maydell@linaro.org
Fixes: 39a1fd2528 ("target/arm: Fix handling of LPAE block descriptors")
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The architecture defines the OS DoubleLock as a register which
(similarly to the OS Lock) suppresses debug events for use in CPU
powerdown sequences. This functionality is required in Arm v7 and
v8.0; from v8.2 it becomes optional and in v9 it must not be
implemented.
Currently in QEMU we implement the OSDLR_EL1 register as a NOP. This
is wrong both for the "feature implemented" and the "feature not
implemented" cases: if the feature is implemented then the DLK bit
should read as written and cause suppression of debug exceptions, and
if it is not implemented then the bit must be RAZ/WI.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Starting with v7 of the debug architecture, there are three extra
ID registers that add information on top of that provided in
DBGDIDR. These are DBGDEVID, DBGDEVID1 and DBGDEVID2. In the
v7 debug architecture, DBGDEVID is optional, present only of
DBGDIDR.DEVID_imp is set. In v7.1 all three must be present.
Implement the missing registers. Note that we only need to set the
values in the ARMISARegisters struct for the CPUs Cortex-A7, A15,
A53, A57 and A72 (plus the 32-bit 'max' which uses the Cortex-A53
values): earlier CPUs didn't implement v7 of the architecture, and
our other 64-bit CPUs (Cortex-A76, Neoverse-N1 and A64fx) don't have
AArch32 support at EL1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220630194116.3438513-5-peter.maydell@linaro.org
The "OS Lock" in the Arm debug architecture is a way for software
to suppress debug exceptions while it is trying to power down
a CPU and save the state of the breakpoint and watchpoint
registers. In QEMU we implemented the support for writing
the OS Lock bit via OSLAR_EL1 and reading it via OSLSR_EL1,
but didn't implement the actual behaviour.
The required behaviour with the OS Lock set is:
* debug exceptions (apart from BKPT insns) are suppressed
* some MDSCR_EL1 bits allow write access to the corresponding
EDSCR external debug status register that they shadow
(we can ignore this because we don't implement external debug)
* similarly with the OSECCR_EL1 which shadows the EDECCR
(but we don't implement OSECCR_EL1 anyway)
Implement the missing behaviour of suppressing debug
exceptions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220630194116.3438513-4-peter.maydell@linaro.org
The target/arm/helper.c file is very long and is a grabbag of all
kinds of functionality. We have already a debug_helper.c which has
code for implementing architectural debug. Move the code which
defines the debug-related system registers out to this file also.
This affects the define_debug_regs() function and the various
functions and arrays which are used only by it.
The functions raw_write() and arm_mdcr_el2_eff() and
define_debug_regs() now need to be global rather than local to
helper.c; everything else is pure code movement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220630194116.3438513-3-peter.maydell@linaro.org
Before moving debug system register helper functions to a
different file, fix the code style issues (mostly block
comment syntax) so checkpatch doesn't complain about the
code-motion patch.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220630194116.3438513-2-peter.maydell@linaro.org
Fixes a bug in that we were not honoring MTE from user-only
SVE. Copy the user-only MTE logic from allocation_tag_mem
into sve_probe_page.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The comment was correct, but the test was not:
disable mte if tagged is *not* set.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In 60592cfed2 ("hw/arm/virt: dt: add kaslr-seed property"), the
kaslr-seed property was added, but the equally as important rng-seed
property was forgotten about, which has identical semantics for a
similar purpose. This commit implements it in exactly the same way as
kaslr-seed. It then changes the name of the disabling option to reflect
that this has more to do with randomness vs determinism, rather than
something particular about kaslr.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[PMM: added deprecated.rst section for the deprecation]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jens Axboe has confirmed that short reads are rare but can happen:
https://lore.kernel.org/io-uring/YsU%2FCGkl9ZXUI+Tj@stefanha-x1.localdomain/T/#m729963dc577d709b709c191922e98ec79d7eef54
The luring_resubmit_short_read() comment claimed they were only due to a
specific io_uring bug that was fixed in Linux commit 9d93a3f5a0c
("io_uring: punt short reads to async context"), which is wrong.
Dominique Martinet found that a btrfs bug also causes short reads. There
may be more kernel code paths that result in short reads.
Let's consider short reads fair game.
Cc: Dominique Martinet <dominique.martinet@atmark-techno.com>
Based-on: <20220630010137.2518851-1-dominique.martinet@atmark-techno.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20220706080341.1206476-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
sqeq.off here is the offset to read within the disk image, so obviously
not 'nread' (the amount we just read), but as the author meant to write
its current value incremented by the amount we just read.
Normally recent versions of linux will not issue short reads,
but it can happen so we should fix this.
This lead to weird image corruptions when short read happened
Fixes: 6663a0a337 ("block/io_uring: implements interfaces for io_uring")
Link: https://lkml.kernel.org/r/YrrFGO4A1jS0GI0G@atmark-techno.com
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Message-Id: <20220630010137.2518851-1-dominique.martinet@atmark-techno.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This queue consists of improvements and bug fixes in TCG, powernv and
pSeries, with some fixes in other areas as well.
- tcg and target/ppc: BCDA and mffscdrn implementations, Remove CONFIG_INT128
conditional code
- fix '-cpu max' alias
- remove '-cpu default' alias
- spapr: fixes in DDW handling, H_WATCHDOG support
- powernv: cleanups in the pnv-phb3/4 models
- fix core type of MPC8555 and MPC8560 models
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYsXrpgAKCRA82cqW3gMx
ZBe9AP4oqMTFw7r9EQPJU4QFMUeAVABl4o0xNb2wLyYov9CtKAD+LoVERSmtLTJ1
kFpgBrRTWKVylaLEdZQoTdFlJeBwzQg=
=GPG1
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220706' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-07-06:
This queue consists of improvements and bug fixes in TCG, powernv and
pSeries, with some fixes in other areas as well.
- tcg and target/ppc: BCDA and mffscdrn implementations, Remove CONFIG_INT128
conditional code
- fix '-cpu max' alias
- remove '-cpu default' alias
- spapr: fixes in DDW handling, H_WATCHDOG support
- powernv: cleanups in the pnv-phb3/4 models
- fix core type of MPC8555 and MPC8560 models
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYsXrpgAKCRA82cqW3gMx
# ZBe9AP4oqMTFw7r9EQPJU4QFMUeAVABl4o0xNb2wLyYov9CtKAD+LoVERSmtLTJ1
# kFpgBrRTWKVylaLEdZQoTdFlJeBwzQg=
# =GPG1
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Jul 2022 01:38:06 AM +0530
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220706' of https://gitlab.com/danielhb/qemu: (34 commits)
target/ppc: Fix MPC8555 and MPC8560 core type to e500v1
target/ppc/cpu-models: Remove the "default" CPU alias
target/ppc: Return default CPU for max CPU
target/ppc: implement cdtbcd
target/ppc: implement cbcdtd
target/ppc: implement addg6s
target/ppc: Add flag for ISA v2.06 BCDA instructions
tests/tcg/ppc64: Add mffsce test
target/ppc: Implement mffscdrn[i] instructions
target/ppc: Move mffs[.] to decodetree
target/ppc: Move mffsl to decodetree
target/ppc: Move mffsce to decodetree
target/ppc: Move mffscrn[i] to decodetree
target/ppc: Fix insn32.decode style issues
ppc/spapr: Implement H_WATCHDOG
ppc: Define SETFIELD for the ppc target
target/ppc: use int128.h methods in vsubcuq
target/ppc: use int128.h methods in vsubecuq and vsubeuqm
target/ppc: use int128.h methods in vsubuqm
target/ppc: use int128.h methods in vaddcuq
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When EXECUTE sets ex_value to interrupt the constructed instruction,
we implicitly disable interrupts so that the value is not corrupted.
Exit to the main loop after execution, so that we re-evaluate any
pending interrupts.
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220702060228.420454-5-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace this with a flag: exit_to_mainloop.
We can now control the exit for each of DISAS_TOO_MANY,
DISAS_PC_UPDATED, and DISAS_PC_CC_UPDATED, and fold in
the check for PER.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220702060228.420454-4-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is nothing to distinguish this from DISAS_TOO_MANY.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220702060228.420454-3-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is nothing to distinguish this from DISAS_NORETURN.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220702060228.420454-2-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the s390-ccw bios with Clang (v14.0), there is currently
an unuseful warning like this:
CC pc-bios/s390-ccw/ipv6.o
../../roms/SLOF/lib/libnet/ipv6.c:447:18: warning: variable length array
folded to constant array as an extension [-Wgnu-folding-constant]
unsigned short raw[ip6size];
^
SLOF is currently GCC-only and cannot be compiled with Clang yet, so
it is expected that such extensions sneak in there - and as long as
we don't want to compile the code with a compiler that is neither GCC
or Clang, it is also not necessary to avoid such extensions.
Thus these GNU-extension related warnings are completely useless in
the s390-ccw bios, especially in the code that is coming from SLOF,
so we should simply disable the related warnings here now.
Message-Id: <20220704111903.62400-13-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
All the other protytpes in the headers here do not use the "extern"
keyword, so let's unify this by removing the "extern" from the misfits,
too.
Message-Id: <20220704111903.62400-12-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The virtio-blk code uses the block size and geometry fields in the
config area. According to the virtio-spec, these have to be negotiated
with the right feature bits during initialization, otherwise they
might not be available. QEMU is so far very forgiving and always
provides them, but we should not rely on this behavior, so let's
better request them properly via the VIRTIO_BLK_F_GEOMETRY and
VIRTIO_BLK_F_BLK_SIZE feature bits.
Message-Id: <20220704111903.62400-11-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The next patch is going to add more virtio-block specific code to
virtio_blk_setup_device(), and if the virtio-scsi code is also in
there, this is more cumbersome. And the calling function virtio_setup()
in main.c looks at the device type already anyway, so it's more
logical to separate the virtio-scsi stuff into a new function in
virtio-scsi.c instead.
Message-Id: <20220704111903.62400-10-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It looks nicer if we separate the run_ccw() from the IPL_assert()
statement, and the error message should talk about "virtio device"
instead of "block device", since this code is nowadays used for
non-block (i.e. network) devices, too.
Message-Id: <20220704111903.62400-9-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Feature negotiation should be done first, since some fields in the
config area can depend on the negotiated features and thus should
rather be read afterwards.
While we're at it, also adjust the error message here a little bit
(the code is nowadays used for non-block virtio devices, too).
Message-Id: <20220704111903.62400-8-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According chapter "3.1.1 Driver Requirements: Device Initialization"
of the Virtio specification (v1.1), a driver for a device has to set
the ACKNOWLEDGE and DRIVER bits in the status field after resetting
the device. The s390-ccw bios skipped these steps so far and seems
like QEMU never cared. Anyway, it's better to follow the spec, so
let's set these bits now in the right spots, too.
Message-Id: <20220704111903.62400-7-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The virtio_assume_scsi() function is very questionable: First, it
is only called for virtio-blk, and not for virtio-scsi, so the naming
is already quite confusing. Second, it is called if we detected a
"invalid" IPL disk, trying to fix it by blindly setting a sector
size of 512. This of course won't work in most cases since disks
might have a different sector size for a reason.
Thus let's remove this strange function now. The calling code can
also be removed completely, since there is another spot in main.c
that does "IPL_assert(virtio_ipl_disk_is_valid(), ...)" to make
sure that we do not try to IPL from an invalid device.
Message-Id: <20220704111903.62400-6-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The s390-ccw bios fails to boot if the boot disk is a virtio-blk
disk with a sector size of 4096. For example:
dasdfmt -b 4096 -d cdl -y -p -M quick /dev/dasdX
fdasd -a /dev/dasdX
install a guest onto /dev/dasdX1 using virtio-blk
qemu-system-s390x -nographic -hda /dev/dasdX1
The bios then bails out with:
! Cannot read block 0 !
Looking at virtio_ipl_disk_is_valid() and especially the function
virtio_disk_is_scsi(), it does not really make sense that we expect
only such a limited disk geometry (like a block size of 512) for
our boot disks. Let's relax the check and allow everything that
remotely looks like a sane disk.
Message-Id: <20220704111903.62400-5-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The logic of trying an final ISO or ECKD boot on virtio-block devices is
very weird: Since the geometry hardly ever matches in virtio_disk_is_scsi(),
virtio_blk_setup_device() always sets a "guessed" disk geometry via
virtio_assume_scsi() (which is certainly also wrong in a lot of cases).
zipl_load_vblk() then sees that there's been a "virtio_guessed_disk_nature"
and tries to fix up the geometry again via virtio_assume_iso9660() before
always trying to do ipl_iso_el_torito(). That's a very brain-twisting
way of attempting to boot from ISO images, which won't work anymore after
the following patches that will clean up the virtio_assume_scsi() mess
(and thus get rid of the "virtio_guessed_disk_nature" here).
Let's try a better approach instead: ISO files always have a magic
string "CD001" at offset 0x8001 (see e.g. the ECMA-119 specification)
which we can use to decide whether we should try to boot in ISO 9660
mode (which we should also try if we see a sector size of 2048).
And if we were not able to boot in ISO mode here, the final boot attempt
before panicking is to boot in ECKD mode. Since this is our last boot
attempt anyway, simply always assume the ECKD geometry here (if the sector
size was not 4096 yet), so that we also do not depend on the guessed disk
geometry from virtio_blk_setup_device() here anymore.
Message-Id: <20220704111903.62400-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use VIRTIO_DASD_DEFAULT_BLOCK_SIZE instead of the magic value 4096.
Message-Id: <20220704111903.62400-3-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Older versions of Clang complain if there is no prototype for main().
Add one, and while we're at it, make sure that we use the same type
for main.c and netmain.c - since the return value does not matter,
declare the return type of main() as "void".
Message-Id: <20220704111903.62400-2-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 80d11f4467 ("Add definitions for Freescale PowerPC implementations")
changed core type of MPC8555 and MPC8560 from e500v1 to e500v2.
But both MPC8555 and MPC8560 have just e500v1 cores, there are no features
of e500v2 cores. It can be verified by reading NXP documentations:
https://www.nxp.com/docs/en/data-sheet/MPC8555EEC.pdfhttps://www.nxp.com/docs/en/data-sheet/MPC8560EC.pdfhttps://www.nxp.com/docs/en/reference-manual/MPC8555ERM.pdfhttps://www.nxp.com/docs/en/reference-manual/MPC8560RM.pdf
Therefore fix core type of MPC8555 and MPC8560 back to e500v1.
Just for completeness, here is list of all Motorola/Freescale/NXP
processors which were released and have e500v1 or e500v2 cores:
e500v1: MPC8540 MPC8541 MPC8555 MPC8560
e500v2: BSC9131 BSC9132
C291 C292 C293
MPC8533 MPC8535 MPC8536 MPC8543 MPC8544 MPC8545 MPC8547
MPC8548 MPC8567 MPC8568 MPC8569 MPC8572
P1010 P1011 P1012 P1013 P1014 P1015 P1016 P1020 P1021
P1022 P1024 P1025 P2010 P2020
Sorted alphabetically; not by release date / generation / feature set.
All this is from public information available on NXP website.
Seems that qemu has support only for some subset of MPC85xx processors.
Historically processors with e500 cores have mpc85xx family codename and
lot of software have them in mpc85xx architecture subdirectory.
Note that GCC uses -mcpu=8540 option for specifying e500v1 core and
-mcpu=8548 option for specifying e500v2 core.
So sometimes (mpc)8540 is alias for e500v1 and (mpc)8548 is alias for
e500v2.
Fixes: 80d11f4467 ("Add definitions for Freescale PowerPC implementations")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220703195029.23793-1-pali@kernel.org>
[danielhb: added more context in the commit msg]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU emulates a *lot* of PowerPC-based machines - having a CPU
that is named "default" and cannot be used with most of those
machines sounds just wrong. Thus let's remove this old and confusing
alias now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220705151030.662140-1-thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Richard Henderson
Akihiko Odaki
Miaoqian Lin
Marc-André Lureau
Alexander Bulekov
Paolo Bonzini
Peter Maydell
Jason A. Donenfeld
Stefan Hajnoczi
Dominique Martinet
Thomas Huth
Pali Rohár