Commit Graph

50 Commits

Author SHA1 Message Date
Blue Swirl 8b9c99d9dc exec: make some functions static
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-01 19:49:45 +01:00
Avi Kivity a8170e5e97 Rename target_phys_addr_t to hwaddr
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific).  Replace it with a finger-friendly,
standards conformant hwaddr.

Outstanding patchsets can be fixed up with the command

  git rebase -i --exec 'find -name "*.[ch]"
                        | xargs s/target_phys_addr_t/hwaddr/g' origin

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-23 08:58:25 -05:00
Avi Kivity 4be403c815 Make target_phys_addr_t 64 bits unconditionally
The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations.  Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-04 19:46:18 -05:00
Peter Maydell e58998c66d cpu-common.h: Remove a pointless ifndef CONFIG_USER_ONLY
Remove an ifndef CONFIG_USER_ONLY guard that was pointless
because it is already inside an if !defined(CONFIG_USER_ONLY).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-02 10:10:07 +01:00
Peter Maydell 72aaa6cec4 cpu-common.h: Remove unnecessary guard on including targphys.h
There's no need to make the include of targphys.h conditional
on whether TARGET_PHYS_ADDR_BITS is defined, because targphys.h
itself checks that and does nothing if it isn't.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-02 10:09:49 +01:00
Wen Congyang 76f3553883 Add API to check whether a physical address is I/O address
This API will be used in the following patch.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-04 13:49:33 -03:00
Stefan Weil 53576999a6 w64: Fix size of ram_addr_t
ram_addr_t must be large enough to address any address of the host.

For hosts with sizeof(unsigned long) == sizeof(void *), this patch
changes nothing. All currently supported hosts fall into this category.

For w64 hosts, sizeof(unsigned long) is 4 while sizeof(void *) is 8,
so the use of uintptr_t is needed.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-03 18:10:16 +00:00
Avi Kivity 11c7ef0c73 Remove IO_MEM_SHIFT
We no longer use any of the lower bits of a ram_addr, so we might as well
use them for the io table index.  This increases the number of potential
I/O handlers by a factor of 8.

Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04 13:34:50 +02:00
Avi Kivity 75c578dcaa Drop IO_MEM_ROMD
Unlike ->readonly, ->readable is not inherited from aliase, so we can simply
query the memory region.

Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04 13:34:50 +02:00
Avi Kivity b3b00c78d8 Remove IO_MEM_SUBPAGE
Replace with a MemoryRegion flag.

Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04 13:34:50 +02:00
Avi Kivity de712f9469 Convert IO_MEM_SUBPAGE_RAM to be a MemoryRegion
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04 13:34:50 +02:00
Avi Kivity 0e0df1e24d Convert IO_MEM_{RAM,ROM,UNASSIGNED,NOTDIRTY} to MemoryRegions
Convert the fixed-address IO_MEM_RAM, IO_MEM_ROM, IO_MEM_UNASSIGNED,
and IO_MEM_NOTDIRTY io handlers to MemoryRegions.  These aren't real
regions, since they are never added to the memory hierarchy, but they
allow reuse of the dispatch functionality.

Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04 13:34:50 +02:00
Avi Kivity c5705a7728 vmstate, memory: decouple vmstate from memory API
Currently creating a memory region automatically registers it for
live migration.  This differs from other state (which is enumerated
in a VMStateDescription structure) and ties the live migration code
into the memory core.

Decouple the two by introducing a separate API, vmstate_register_ram(),
for registering a RAM block for migration.  Currently the same
implementation is reused, but later it can be moved into a separate list,
and registrations can be moved to VMStateDescription blocks.

Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-04 13:34:48 +02:00
Avi Kivity 586c6230c0 Remove cpu_get_physical_page_desc()
No longer used.

Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-03 19:19:28 +02:00
Avi Kivity dcd97e33af memory: remove CPUPhysMemoryClient
No longer used.

Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-03 19:19:27 +02:00
Avi Kivity 67d95c153b memory: move obsolete exec.c functions to a private header
This will help avoid accidental usage.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-19 17:28:54 +02:00
Avi Kivity fce537d4a7 memory, xen: pass MemoryRegion to xen_ram_alloc()
Currently xen_ram_alloc() relies on ram_addr, which is going away.
Give it something else to use as a cookie.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-19 17:23:24 +02:00
Andreas Färber 56384e8b1e exec.c: Fix subpage memory access to RAM MemoryRegion
Commit 95c318f5e1 (Fix segfault in mmio
subpage handling code.) prevented a segfault by making all subpage
registrations over an existing memory page perform an unassigned access.
Symptoms were writes not taking effect and reads returning zero.

Very small page sizes are not currently supported either,
so subpage memory areas cannot fully be avoided.

Therefore change the previous fix to use a new IO_MEM_SUBPAGE_RAM
instead of IO_MEM_UNASSIGNED. Suggested by Avi.

Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Avi Kivity <avi@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-15 09:27:23 -06:00
Dong Xu Wang 07f35073c6 fix spelling in main directory
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-02 10:50:57 +00:00
Anthony Liguori 3046c98404 Merge remote-tracking branch 'agraf/xen-next' into staging 2011-07-29 09:42:12 -05:00
Paolo Bonzini 332ae28dad move WORDS_ALIGNED to qemu-common.h
This is not a CPU interface, and a configure test would not be too
precise.  So just add it to qemu-common.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29 08:25:45 -05:00
Anthony PERARD f15fbc4bd1 cpu-common: Have a ram_addr_t of uint64 with Xen.
In Xen case, memory can be bigger than the host memory. that mean a
32bits host (and QEMU) should be able to handle a RAM address of 64bits.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-26 06:57:28 +02:00
Blue Swirl 21673cdecb Avoid CPU endian memory accesses in devices
Don't compile virtio.c in hwlib, it depends on memory accesses
performed in CPU endianness.

Make loads and stores in CPU endianness unavailable to devices
and poison them to avoid further bugs.

Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20 21:22:43 +00:00
Stefano Stabellini 8ab934f93b qemu_ram_ptr_length: take ram_addr_t as arguments
qemu_ram_ptr_length should take ram_addr_t as argument rather than
target_phys_addr_t because is doing comparisons with RAMBlock addresses.

cpu_physical_memory_map should create a ram_addr_t address to pass to
qemu_ram_ptr_length from PhysPageDesc phys_offset.

Remove code after abort() in qemu_ram_ptr_length.

Changes in v2:

- handle 0 size in qemu_ram_ptr_length;

- rename addr1 to raddr;

- initialize raddr to ULONG_MAX.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17 01:54:25 +02:00
Alexander Graf 1e78bcc19c exec: add endian specific phys ld/st functions
Device code some times needs to access physical memory and does that
through the ld./st._phys functions. However, these are the exact same
functions that the CPU uses to access memory, which means they will
be endianness swapped depending on the target CPU.

However, devices don't know about the CPU's endianness, but instead
access memory directly using their own interface to the memory bus,
so they need some way to read data with their native endianness.

This patch adds _le and _be functions to ld./st._phys.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12 20:00:24 +00:00
Stefano Stabellini 38bee5dc94 exec.c: refactor cpu_physical_memory_map
Introduce qemu_ram_ptr_length that takes an address and a size as
parameters rather than just an address.

Refactor cpu_physical_memory_map so that we call qemu_ram_ptr_length only
once rather than calling qemu_get_ram_ptr one time per page.
This is not only more efficient but also tries to simplify the logic of
the function.
Currently we are relying on the fact that all the pages are mapped
contiguously in qemu's address space: we have a check to make sure that
the virtual address returned by qemu_get_ram_ptr from the second call on
is consecutive. Now we are making this more explicit replacing all the
calls to qemu_get_ram_ptr with a single call to qemu_ram_ptr_length
passing a size argument.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: agraf@suse.de
CC: anthony@codemonkey.ws
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19 04:40:05 +02:00
Alex Williamson 1f2e98b62d exec: Implement qemu_ram_free_from_ptr()
Required for regions mapped via qemu_ram_alloc_from_ptr().  VFIO
and ivshmem will make use of this to remove mappings when devices
are hot unplugged.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-06-03 22:59:15 +02:00
Anthony PERARD 050a0ddf39 Introduce qemu_put_ram_ptr
This function allows to unlock a ram_ptr give by qemu_get_ram_ptr. After
a call to qemu_put_ram_ptr, the pointer may be unmap from QEMU when
used with Xen.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08 10:10:01 +02:00
Michael S. Tsirkin 5300f1a548 Merge remote branch 'origin/master' into pci
Conflicts:
	exec.c
2011-05-05 16:39:47 +03:00
Stefan Weil 3bad98147f cpu-common: Modify cpu_physical_memory_read and cpu_physical_memory_write
A lot of calls don't operate on bytes but on words or on structured data.
So instead of a pointer to uint8_t, a void pointer is the better choice.

This allows removing many type casts.

(Some very early implementations of memcpy used char pointers
which were replaced by void pointers for the same reason).

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-12 21:51:50 +02:00
Michael S. Tsirkin 0fd542fb7d cpu: add set_memory flag to request dirty logging
Pass the flag to all cpu notifiers, doing
nothing at this point. Will be used by
follow-up patches.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-04-06 22:28:40 +03:00
Huang Ying cd19cfa236 Add qemu_ram_remap
qemu_ram_remap() unmaps the specified RAM pages, then re-maps these
pages again.  This is used by KVM HWPoison support to clear HWPoisoned
page tables across guest rebooting, so that a new page may be
allocated later to recover the memory error.

[ Jan: style fixlets, WIN32 fix ]

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-03-15 01:19:06 -03:00
Anthony PERARD e5896b12e2 Introduce log_start/log_stop in CPUPhysMemoryClient
In order to use log_start/log_stop with Xen as well in the vga code,
this two operations have been put in CPUPhysMemoryClient.

The two new functions cpu_physical_log_start,cpu_physical_log_stop are
used in hw/vga.c and replace the kvm_log_start/stop. With this, vga does
no longer depends on kvm header.

[ Jan: rebasing and style fixlets ]

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14 12:39:47 -02:00
Alexander Graf dd310534e3 exec: introduce endianness swapped mmio
The way we're currently modeling mmio is too simplified. We assume that
every device has the same endianness as the target CPU. In reality,
most devices are little endian (all PCI and ISA ones I'm aware of). Some
are big endian (special system devices) and a very little fraction is
target native endian (fw_cfg).

So instead of assuming every device to be native endianness, let's move
to a model where the device tells us which endianness it's in.

That way we can compile the devices only once and get rid of all the ugly
swap will be done by the underlying layer.

For the same of readability, this patch only introduces the helper framework
but doesn't allow the registering code to set its endianness yet.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 15:24:25 +00:00
Michael S. Tsirkin b2e0a138e7 migration: stable ram block ordering
This makes ram block ordering under migration stable, ordered by offset.
This is especially useful for migration to exec, for debugging.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
2010-12-02 21:13:39 +02:00
Marcelo Tosatti e890261f67 Export qemu_ram_addr_from_host
To be used by next patches.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-20 16:15:04 -05:00
Cam Macdonell 84b89d782f Add qemu_ram_alloc_from_ptr function
Provide a function to add an allocated region of memory to the qemu RAM.

This patch is copied from Marcelo's qemu_ram_map() in qemu-kvm and given the
clearer name qemu_ram_alloc_from_ptr().

Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-10 16:25:15 -05:00
Alex Williamson 1724f04985 qemu_ram_alloc: Add DeviceState and name parameters
These will be used to generate unique id strings for ramblocks.  The name
field is required, the device pointer is optional as most callers don't
have a device.  When there's no device or the device isn't a child of
a bus implementing BusInfo.get_dev_path, the name should be unique for
the platform.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06 10:36:28 -05:00
Richard Henderson f64052478e Remove IO_MEM_SUBWIDTH.
Greatly simplify the subpage implementation by not supporting
multiple devices at the same address at different widths.  We
don't need full copies of mem_read/mem_write/opaque for each
address, only a single index back into the main io_mem_* arrays.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-25 12:59:33 +00:00
Paolo Bonzini 37b76cfd93 move targphys.h and hw/poison.h inclusion to cpu-common.h
With more files from outside the hw/ directory being placed into
libhw, avoid the need to include hw/hw.h for the sake of targ_phys_addr_t.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-09 18:55:55 +02:00
Aurelien Jarno 477ba62001 tcg: initial ia64 support
A few words about design choices:
* On IA64, instructions should be grouped by bundle, and dependencies
  between instructions declared. A first version of this code tried to
  schedule instructions automatically, but was very complex and too
  invasive for the current common TCG code (ops not ending at
  instruction boundaries, code retranslation breaking already generated
  code, etc.)  It was also not very efficient, as dependencies between
  TCG ops is not available.
  Instead the option taken by the current implementation does not try
  to fill the bundle by scheduling instructions, but by providing ops
  not available as an ia64 instruction, and by offering 22-bit constant
  loading for most of the instructions. With both options the bundle are
  filled at approximately the same level.

* Up to 128 registers can be affected to a function on IA64, but TCG
  limits this number to 64, which is actually more than enough. The
  register affectation is the following:
  - r0: used to map a constant argument with value 0
  - r1: global pointer
  - r2, r3: internal use
  - r4 to r6: not used to avoid saving them
  - r7: env structure
  - r8 to r11: free for TCG (call clobbered)
  - r12: stack pointer
  - r13: thread pointer
  - r14 to r31: free for TCG (call clobbered)
  - r32: reserved (return address)
  - r33: reserved (PFS)
  - r33 to r63: free for TCG

* The IA64 architecture has only 64-bit registers and no 32-bit
  instructions (the only exception being cmp4). Therefore 64-bit
  registers and instructions are used for 32-bit ops. The adopted
  strategy is the same as the ABI, that is the higher 32 bits are
  undefined. Most ops (and, or, add, shl, etc.) can directly use
  the 64-bit registers, while some others have to sign-extend (sar,
  div, etc.) or zero-extend (shr, divu, etc.) the register first.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01 21:51:59 +02:00
Blue Swirl 6842a08ee0 Compile pci only once
Move coalesced_mmio declarations to a more accessible location.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:13 +00:00
Paul Brook b3755a915e Disable phsyical memory handling in userspace emulation.
Code to handle physical memory access is not meaningful in usrmode emulation,
so disable it.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-12 18:34:25 +00:00
Michael S. Tsirkin f6f3fbcab0 qemu: memory notifiers
This adds notifiers for phys memory changes: a set of callbacks that
vhost can register and update kernel accordingly.  Down the road, kvm
code can be switched to use these as well, instead of calling kvm code
directly from exec.c as is done now.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-09 16:56:13 -06:00
Anthony Liguori c227f0995e Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b72.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01 16:12:16 -05:00
malc 99a0949b72 Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the time
being.

Signed-off-by: malc <av1474@comtv.ru>
2009-10-01 22:45:02 +04:00
Blue Swirl d60efc6b0d Make CPURead/WriteFunc structure 'const'
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-25 18:29:31 +00:00
Anthony Liguori 4a1418e07b Unbreak large mem support by removing kqemu
kqemu introduces a number of restrictions on the i386 target.  The worst is that
it prevents large memory from working in the default build.

Furthermore, kqemu is fundamentally flawed in a number of ways.  It relies on
the TSC as a time source which will not be reliable on a multiple processor
system in userspace.  Since most modern processors are multicore, this severely
limits the utility of kqemu.

kvm is a viable alternative for people looking to accelerate qemu and has the
benefit of being supported by the upstream Linux kernel.  If someone can
implement work arounds to remove the restrictions introduced by kqemu, I'm
happy to avoid and/or revert this patch.

N.B. kqemu will still function in the 0.11 series but this patch removes it from
the 0.12 series.

Paul, please Ack or Nack this patch.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24 08:02:55 -05:00
Avi Kivity 1eed09cb4a Remove io_index argument from cpu_register_io_memory()
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty).  Remove the parameter to reduce
the API's power, thus facilitating future change.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:37 -05:00
Paul Brook 1ad2134f91 Hardware convenience library
The only target dependency for most hardware is sizeof(target_phys_addr_t).
Build these files into a convenience library, and use that instead of
building for every target.

Remove and poison various target specific macros to avoid bogus target
dependencies creeping back in.

Big/Little endian is not handled because devices should not know or care
about this to start with.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-19 16:17:58 +01:00