Depending on the configuration of QEMU, some binaries might not need libm
at all. In that case libiscsi, which uses exp(), will fail to load.
Link it in the module explicitly.
Reported-by: Yi Sun <yisun@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now all dependencies for block modules are passed to
module_ss.add(when: ...), so they are mandatory. In the next patch we
will need to add a libm dependency to a module, but libm does not exist
on all systems. So, modify the creation of module_ss and modsrc so that
dependencies can also be passed to module_ss.add(if_true: ...).
While touching the array, remove the useless dependency of the curl
module on glib. glib is always linked in QEMU and in fact all other
block modules also need it, but they don't have to specify it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the normal case of no additional scaling, this reduces the
profile contribution of int64_to_float64 to the testcase in the
linked issue from 0.81% to 0.04%.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/134
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix the trivial typo in extF80_lt_quiet, and re-enable
all of the floatx80 tests that are now fixed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <87bl9iyahr.fsf@linaro.org>
[rth: Squash the fix for lt_quiet, and enable that too.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to parts$N_modrem. This was the last use of a lot
of the legacy infrastructure, so remove it as required.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to parts$N_log2. Though this is partly a ruse, since I do not
believe the code will succeed for float128 without work. Which is ok
for now, because we do not need this for more than float32 and float64.
Since berkeley-testfloat-3 doesn't support log2, compare float64_log2
vs the system log2. Fix the errors for inputs near 1.0:
test: 3ff00000000000b0 +0x1.00000000000b0p+0
sf: 3d2fa00000000000 +0x1.fa00000000000p-45
libm: 3d2fbd422b1bd36f +0x1.fbd422b1bd36fp-45
Error in fraction: 32170028290927 ulp
test: 3feec24f6770b100 +0x1.ec24f6770b100p-1
sf: bfad3740d13c9ec0 -0x1.d3740d13c9ec0p-5
libm: bfad3740d13c9e98 -0x1.d3740d13c9e98p-5
Error in fraction: 40 ulp
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Keep the intermediate results in FloatParts instead of
converting back and forth between float64. Use muladd
instead of separate mul+add.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is the last use of commonNaNT and all of the routines
that use it, so remove all of them for Werror.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since this is the first such, this includes all of the
packing and unpacking routines as well.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Many qemu softfloat will check floatx80_rounding_precision
even when berkeley testfloat will not. So begin with
floatx80_precision_x, so that's the one we use
when !FUNC_EFF_ROUNDINGPRECISION.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With floatx80_precision_x, the rounding happens across
the break between words. Notice this case with
frac_lsb = round_mask + 1 -> 0
and check the bits in frac_hi as needed.
In addition, since frac_shift == 0, we won't implicitly clear
round_mask via the right-shift, so explicitly clear those bits.
This fixes rounding for floatx80_precision_[sd].
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use an enumeration instead of raw 32/64/80 values.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove frac_lsb, frac_lsbm1, roundeven_mask. Compute
these from round_mask in parts$N_uncanon_normal.
With floatx80, round_mask will not be tied to frac_shift.
Everything else is easily computable.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need to treat the non-normal cases of floatx80 specially,
so split out the normal case that we can reuse.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to parts$N_sqrt.
Reimplement float128_sqrt with FloatParts128.
Reimplement with the inverse sqrt newton-raphson algorithm from musl.
This is significantly faster than even the berkeley sqrt n-r algorithm,
because it does not use division instructions, only multiplication.
Ordinarily, changing algorithms at the same time as migrating code is
a bad idea, but this is the only way I found that didn't break one of
the routines at the same time.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to parts$N_scalbn.
Reimplement float128_scalbn with FloatParts128.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to parts$N_compare. Rename all of the intermediate
functions to ftype_do_compare. Rename the hard-float functions
to ftype_hs_compare. Convert float128 to FloatParts128.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The float128 implementation is straight-forward.
Unfortuantely, we don't have any tests we can simply adjust/unlock.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210517142739.38597-24-david@redhat.com>
[rth: Update for changed parts_minmax return value]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to parts$N_minmax. Combine 3 bool arguments to a bitmask.
Introduce ftype_minmax functions as a common optimization point.
Fold bfloat16 expansions into the same macro as the other types.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to parts$N_uint_to_float.
Reimplement uint64_to_float128 with FloatParts128.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to parts$N_sint_to_float.
Reimplement int{32,64}_to_float128 with FloatParts128.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to parts$N_float_to_uint. Reimplement
float128_to_uint{32,64}{_round_to_zero} with FloatParts128.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Some not-yet-enabled preliminaries for M-profile MVE support
* Consistently use "Cortex-Axx", not "Cortex Axx" in docs, comments
* docs: Fix installation of man pages with Sphinx 4.x
* Mark LDS{MIN,MAX} as signed operations
* Fix missing syndrome value for DAIF and PAC check exceptions
* Implement BFloat16 extensions
* Refactoring of hvf accelerator code in preparation for aarch64 support
* Fix some coverity nits in test code
-----BEGIN PGP SIGNATURE-----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=hjbH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210603' into staging
target-arm queue:
* Some not-yet-enabled preliminaries for M-profile MVE support
* Consistently use "Cortex-Axx", not "Cortex Axx" in docs, comments
* docs: Fix installation of man pages with Sphinx 4.x
* Mark LDS{MIN,MAX} as signed operations
* Fix missing syndrome value for DAIF and PAC check exceptions
* Implement BFloat16 extensions
* Refactoring of hvf accelerator code in preparation for aarch64 support
* Fix some coverity nits in test code
# gpg: Signature made Thu 03 Jun 2021 16:58:02 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210603: (45 commits)
tests/unit/test-vmstate: Assert that dup() and mkstemp() succeed
tests/qtest/tpm-tests: Remove unnecessary NULL checks
tests/qtest/pflash-cfi02-test: Avoid potential integer overflow
tests/qtest/hd-geo-test: Fix checks on mkstemp() return value
tests/qtest/e1000e-test: Check qemu_recv() succeeded
tests/qtest/bios-tables-test: Check for dup2() failure
hvf: Simplify post reset/init/loadvm hooks
hvf: Introduce hvf vcpu struct
hvf: Remove hvf-accel-ops.h
hvf: Make synchronize functions static
hvf: Use cpu_synchronize_state()
hvf: Split out common code on vcpu init and destroy
hvf: Remove use of hv_uvaddr_t and hv_gpaddr_t
hvf: Make hvf_set_phys_mem() static
hvf: Move hvf internal definitions into common header
hvf: Move cpu functions into common directory
hvf: Move vcpu thread functions into common directory
hvf: Move assert_hvf_ok() into common directory
target/arm: Enable BFloat16 extensions
linux-user/aarch64: Enable hwcap bits for bfloat16
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity complains that we don't check for failures from dup()
and mkstemp(); add asserts that these syscalls succeeded.
Fixes: Coverity CID 1432516, 1432574
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210525134458.6675-7-peter.maydell@linaro.org
Coverity points out that in tpm_test_swtpm_migration_test() we
assume that src_tpm_addr and dst_tpm_addr are non-NULL (we
pass them to tpm_util_migration_start_qemu() which will
unconditionally dereference them) but then later explicitly
check them for NULL. Remove the pointless checks.
Fixes: Coverity CID 1432367, 1432359
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-6-peter.maydell@linaro.org
Coverity points out that we calculate a 64-bit value using 32-bit
arithmetic; add the cast to force the multiply to be done as 64-bits.
(The overflow will never happen with the current test data.)
Fixes: Coverity CID 1432320
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-5-peter.maydell@linaro.org
Coverity notices that the checks against mkstemp() failing in
create_qcow2_with_mbr() are wrong: mkstemp returns -1 on failure but
the check is just "g_assert(fd)". Fix to use "g_assert(fd >= 0)",
matching the correct check in create_test_img().
Fixes: Coverity CID 1432274
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-4-peter.maydell@linaro.org
The e1000e_send_verify() test calls qemu_recv() but doesn't
check that the call succeeded, which annoys Coverity. Add
an explicit test check for the length of the data.
(This is a test check, not a "we assume this syscall always
succeeds", so we use g_assert_cmpint() rather than g_assert().)
Fixes: Coverity CID 1432324
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-3-peter.maydell@linaro.org
Coverity notes that we don't check for dup2() failing. Add some
assertions so that if it does ever happen we get some indication.
(This is similar to how we handle other "don't expect this syscall to
fail" checks in this test code.)
Fixes: Coverity CID 1432346
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-2-peter.maydell@linaro.org
The hooks we have that call us after reset, init and loadvm really all
just want to say "The reference of all register state is in the QEMU
vcpu struct, please push it".
We already have a working pushing mechanism though called cpu->vcpu_dirty,
so we can just reuse that for all of the above, syncing state properly the
next time we actually execute a vCPU.
This fixes PSCI resets on ARM, as they modify CPU state even after the
post init call has completed, but before we execute the vCPU again.
To also make the scheme work for x86, we have to make sure we don't
move stale eflags into our env when the vcpu state is dirty.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-13-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will need more than a single field for hvf going forward. To keep
the global vcpu struct uncluttered, let's allocate a special hvf vcpu
struct, similar to how hax does it.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-12-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can move the definition of hvf_vcpu_exec() into our internal
hvf header, obsoleting the need for hvf-accel-ops.h.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-11-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The hvf accel synchronize functions are only used as input for local
callback functions, so we can make them static.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-10-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no reason to call the hvf specific hvf_cpu_synchronize_state()
when we can just use the generic cpu_synchronize_state() instead. This
allows us to have less dependency on internal function definitions and
allows us to make hvf_cpu_synchronize_state() static.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-9-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch splits the vcpu init and destroy functions into a generic and
an architecture specific portion. This also allows us to move the generic
functions into the generic hvf code, removing exported functions.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-8-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARM version of Hypervisor.framework no longer defines these two
types, so let's just revert to standard ones.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-7-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The hvf_set_phys_mem() function is only called within the same file.
Make it static.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-6-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves a few internal struct and constant defines over.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-5-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves CPU and memory operations over. While at it, make sure
the code is consumable on non-i386 systems.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-4-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves the vCPU thread loop over.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-3-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
