CPUState::gdb_num_regs replaces num_g_regs.
CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS.
Allows building gdb_register_coprocessor() for xtensa, too.
As a side effect this should fix coprocessor register numbering for SMP.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Register a CPU type per core registered. Save the XtensaConfig in
XtensaCPUClass and copy it from there to CPUXtensaState, to avoid
touching every env->config access for now.
Prepares for storing per-class GDB register count.
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change breakpoint_invalidate() argument to CPUState alongside.
Since all targets now assign a softmmu-only field, we can drop helpers
cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd().
Prepares for changing cpu_memory_rw_debug() argument to CPUState.
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Where no extra implementation is needed, fall back to CPUClass::set_pc().
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
This moves setting the Program Counter from gdbstub into target code.
Use vaddr type as upper-bound replacement for target_ulong.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Also use bool type while at it.
Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: qemu-stable@nongnu.org
Reported-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
A transition from CPUFooState to FooCPU can be considered safe,
just like FooCPU::env access in the opposite direction.
The only benefit of the FOO_CPU() casts would be protection against
bogus CPUFooState pointers, but then surrounding code would likely
break, too.
This should slightly improve interrupt etc. performance when going from
CPUFooState to FooCPU.
For any additional CPU() casts see 3556c233d9
(qom: allow turning cast debugging off).
Reported-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This allows to move the call into CPUState's realizefn.
Therefore move the stub into libqemustub.a.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Make cpustats monitor command available unconditionally.
Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
This removes a global per-target function and thus takes us one step
closer to compiling multiple targets into one executable.
It will also allow to override the interrupt handling for certain CPU
families.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
The gen_icount_start/end functions are now somewhat misnamed since they
are useful for generic "start/end of TB" code, used for more than just
icount. Rename them to gen_tb_start/end.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce ENV_OFFSET macros which can be used in non-target-specific
code that needs to generate TCG instructions which reference CPUState
fields given the cpu_env register that TCG targets set up with a
pointer to the CPUArchState struct.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The target-specific ENV_GET_CPU() macros have allowed us to navigate
from CPUArchState to CPUState. The reverse direction was not supported.
Avoid introducing CPU_GET_ENV() macros by initializing an untyped
pointer that is initialized in derived instance_init functions.
The field may not be called "env" due to it being poisoned.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Combine this with breakpoint handler registration, guarding both with
tcg_enabled() to suppress also TCG init for qtest. Rename the handler to
xtensa_breakpoint_handler() since it needs to become global.
Signed-off-by: Andreas Färber <afaerber@suse.de>
There was no CPU_SAVE_VERSION defined, so neither "cpu_common" VMState
nor cpu_{save,load}() were registered. Their implementation was no-op.
Therefore there is no backwards compatibility to keep, so mark XtensaCPU
as unmigratable at device level.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Zero out tcg_ctx.gen_opc_instr_start for instructions representing the
last guest opcode in the TB.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Refactor common code around calls to cpu_restore_state().
tb_find_pc() has now no external users, make it static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With MMU option xtensa architecture has two TLBs: ITLB and DTLB. ITLB is
only used for code access, DTLB is only for data. However TLB entries in
both TLBs have attribute field controlling write and exec access. These
bits need to be properly masked off depending on TLB type before being
used as tlb_set_page prot argument. Otherwise the following happens:
(1) ITLB entry for some PFN gets invalidated
(2) DTLB entry for the same PFN gets updated, attributes allow code
execution
(3) code at the page with that PFN is executed (possible due to step 2),
entry for the TB is written into the jump cache
(4) QEMU TLB entry for the PFN gets replaced with an entry for some
other PFN
(5) code in the TB from step 3 is executed (possible due to jump cache)
and it accesses data, for which there's no DTLB entry, causing DTLB
miss exception
(6) re-translation of the TB from step 5 is attempted, but there's no
QEMU TLB entry nor xtensa ITLB entry for that PFN, which causes ITLB
miss exception at the TB start address
(7) ITLB miss exception is handled by the guest, but execution is
resumed from the beginning of the faulting TB (the point where ITLB
miss occured), not from the point where DTLB miss occured, which is
wrong.
With that fix the above scenario causes ITLB miss exception (that used
to be step 7) at step 3, right at the beginning of the TB.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use movcond for all sorts of conditional moves, ABS, CLAMPS, MIN/MAX
opcodes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The Miscellaneous Special Registers Option provides zero to four scratch
registers within the processor readable and writable by RSR, WSR, and
XSR. These registers are privileged. They may be useful for some
application-specific exception and interrupt processing tasks in the
kernel. The MISC registers are undefined after reset.
See ISA, 4.7.3 for details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There are read-only (DEBUGCAUSE, PRID) and write-only (INTCLEAR) SRs,
and INTERRUPT/INTSET SR allows rsr/wsr, but not xsr. Raise illeagal
opcode exception on illegal access to these SRs.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Beginning with the RA-2004.1 release, SR access instructions (rsr, wsr,
xsr) are associated with their corresponding SR and raise illegal opcode
exception in case the register is not configured for the core.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In XEA1, the Options for Memory Protection and Translation and the
corresponding TLB management instructions are not available. Instead,
functionality similar to the Region Protection Option is available
through the cache attribute register. See ISA, A.2.14 for details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
ATOMCTL SR controls s32c1i opcode behavior depending on targeted memory
type. See ISA, 4.3.12.4 for details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
For target-mips also change the return type to bool.
Make include paths for cpu-qom.h consistent for alpha and unicore32.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[AF: Updated new target-openrisc function accordingly]
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that "and" with 0xff, 0xffff and 0xffffffff and "shr" with 0 shift
are optimized in tcg/tcg-op.h there is no need to do it in
target-xtensa/translate.c.
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.
This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case Coprocessor Context option is enabled CPENABLE SR bits control
whether access to coprocessors is allowed or would rise one of
CoprocessorXDisabled exceptions.
See ISA, 4.4.5 for more details.
FP is coprocessor 0.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are comparison and conditional move opcodes.
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are FP to integer and integer to FP conversion opcodes.
See ISA, 4.3.10 for more details.
Note that ISA description for utrunc.s is currently incorrect and will
be fixed in future revisions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
