Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221220113436.14299-4-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Per the comment in the Malta board, the [0x0000.0000-0x2000.0000]
range is decoded by the GT64120, so move the "empty_slot" there.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221209151533.69516-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221209151533.69516-2-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
GT64120's PCI endianness swapping works on little-endian hosts,
but doesn't on big-endian ones. Instead of complicating how
CFGADDR/CFGDATA registers deal with endianness, use the existing
MemoryRegionOps from hw/pci/pci_host.c. Doing so also reduce the
access to internal PCI_HOST_BRIDGE fields.
Map the PCI_HOST_BRIDGE MemoryRegionOps into the corresponding
CFGADDR/CFGDATA regions in the ISD MMIO and remove the unused
code in the current ISD read/write handlers.
Update the mapping when PCI0_CMD register is accessed (in case
the endianness is changed).
This allows using the GT64120 on a big-endian host (and boot
the MIPS Malta machine in little-endian).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-6-philmd@linaro.org>
Single registers access in ISD can produce multiple changes
in the address spaces. To reduce computational effort,
accumulate these as a single memory transaction.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-5-philmd@linaro.org>
The FPGA LEDs/ASCII display is mostly used by the bootloader
to show very low-level debug info. QEMU connects its output
to a character device backend, which is not very practical
to correlate with ASM instruction executed, interrupts or
MMIO accesses. Also, the display discard the previous states.
To ease bootloader debugging experience, add a pair of trace
events. Such events can be analyzed over time or diff-ed
between different runs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-4-philmd@linaro.org>
No need to refresh the ASCII bar when a LED is toggled
(and vice versa).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230104133935.4639-3-philmd@linaro.org>
The cmd_line.txt mangling is only needed when rebuilding from very old
trees and is kept mostly as an example of how to extend it. However,
Meson 0.63 introduces a deprecation mechanism for meson_options.txt
that can be used instead, so get rid of our home-grown hack.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VRCPSS, VRSQRTSS and VCVTSx2Sx have a 32-bit or 64-bit memory operand,
which is represented in the decoding tables by X86_VEX_REPScalar. Add it
to the tables, and make validate_vex() handle the case of an instruction
that is in exception type 4 without the REP prefix and exception type 5
with it; this is the cas of VRCP and VRSQRT.
Reported-by: yongwoo <https://gitlab.com/yongwoo36>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1377
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case libvhost-user is used externally, that projects compiler
warnings might be more strict. Enforce an extra set of compiler warnings
to catch issues early on.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <08daa1896ad8824e17d57d6a970bc0b4bee73ece.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case libvhost-user is used externally, that projects compiler
warnings might be more strict. Enforce an extra set of compiler warnings
to catch issues early on.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <737ebf2e697f8640558e6f73d96a692711f548f6.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since it was proposed to change the code in libvduse.c to use memcpy
instead of an assignment, the code in libvhost-user.c should also be
changed to use memcpy.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <502b22723264db064e4b05008233a9c1f2f8aaaa.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the assignment is causing a compiler warning, fix it by using
memcpy instead.
CC libvduse.o
libvduse.c: In function ‘vring_set_avail_event’:
libvduse.c:603:7: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasin]
603 | *((uint16_t *)&vq->vring.used->ring[vq->vring.num]) = htole16(val);
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Suggested-by: Xie Yongji <xieyongji@bytedance.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <4a0fe2a6436464473119fdbf0bc4076b36fbb37f.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It seems there is no need to keep the inuse field signed and end up with
compiler warnings for sign-compare.
CC libvduse.o
libvduse.c: In function ‘vduse_queue_pop’:
libvduse.c:789:19: error: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Werror=sign-compare]
789 | if (vq->inuse >= vq->vring.num) {
| ^~
Instead of casting the comparison to unsigned int, just make the inuse
field unsigned int in the fist place.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <9fe3fd8b042e048bd04d506ca6e43d738b5c45b7.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the libvduse sources are used by another project, it can not be
guaranteed that _GNU_SOURCE is set by the build system. If it is for
example not set, errors like this show up.
CC libvduse.o
libvduse.c: In function ‘vduse_log_get’:
libvduse.c:172:9: error: implicit declaration of function ‘ftruncate’; did you mean ‘strncat’? [-Werror=implicit-function-declaration]
172 | if (ftruncate(fd, size) == -1) {
| ^~~~~~~~~
| strncat
The simplest way to allow external complication of libvduse.[ch] by
setting _GNU_SOURCE if it is not already set by the build system.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <407f3665f0605df936e5bfe60831d180edfb8cca.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The assignment of dev->postcopy_ufd can be moved into an else clause and
then the code becomes C90 compliant.
CC libvhost-user.o
libvhost-user.c: In function ‘vu_set_postcopy_advise’:
libvhost-user.c:1625:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
1625 | struct uffdio_api api_struct;
| ^~~~~~
Understandable, it might be desired to avoid else clauses, but in this
case it seems clear enough and frankly the dev->postcopy_ufd is only
assigned once.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <74db52afb1203c4580ffc7fa462b4b2ba260a353.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When using libvhost-user source in an external project that wants to
comply with the C90 standard, it is best to declare variables before
code.
CC libvhost-user.o
libvhost-user.c: In function ‘generate_faults’:
libvhost-user.c:683:9: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
683 | struct uffdio_register reg_struct;
| ^~~~~~
In this case, it is also simple enough and doesn't cause any extra
ifdef additions.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <556c2d00c01fa134d13c0371d4014c90694c2943.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The sign-compare warning also hits some of the for-loops, but it easy
fixed by just making the iterator variable unsigned int.
CC libvhost-user.o
libvhost-user.c: In function ‘vu_gpa_to_va’:
libvhost-user.c:223:19: error: comparison of integer expressions of different signedness: ‘int’ and ‘uint32_t’ {aka ‘unsigned int’} [-Werror=sign-compare]
223 | for (i = 0; i < dev->nregions; i++) {
| ^
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <decb925e1a6fb9538738d2570bda2804f888fa15.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The assert from recvmsg() return value against an uint32_t size field
from a protocol struct throws a compiler warning.
CC libvhost-user.o
In file included from libvhost-user.c:27:
libvhost-user.c: In function ‘vu_message_read_default’:
libvhost-user.c:363:19: error: comparison of integer expressions of different signedness: ‘int’ and ‘uint32_t’ {aka ‘unsigned int’} [-Werror=sign-compare]
363 | assert(rc == vmsg->size);
| ^~
This is not critical, but annoying when the libvhost-user source are
used in an external project that has this compiler warning switched on.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <7a791e27b7bd3e0a8b8cc8fbb15090a870d226d5.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Strictly speaking only -std=gnu99 support the usage of typeof and for
easier inclusion in external projects, it is better to use __typeof__.
CC libvhost-user.o
libvhost-user.c: In function ‘vu_log_queue_fill’:
libvhost-user.c:86:13: error: implicit declaration of function ‘typeof’ [-Werror=implicit-function-declaration]
86 | typeof(x) _min1 = (x); \
| ^~~~~~
Changing these two users of typeof makes the compiler happy and no extra
flags or pragmas need to be provided.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <981aa822bcaaa2b8d74f245339a99a85c25b346f.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Then the libvhost-user sources are used by another project, it can not
be guaranteed that _GNU_SOURCE is set by the build system. If it is for
example not set, errors like this show up.
CC libvhost-user.o
libvhost-user.c: In function ‘vu_panic’:
libvhost-user.c:195:9: error: implicit declaration of function ‘vasprintf’; did you mean ‘vsprintf’? [-Werror=implicit-function-declaration]
195 | if (vasprintf(&buf, msg, ap) < 0) {
| ^~~~~~~~~
| vsprintf
The simplest way to allow external complication of libvhost-user.[ch] is
by setting _GNU_SOURCE if it is not already set by the build system.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Message-Id: <be27dcc747a6b5cc6f8ae3f79e0b79171382bcef.1671741278.git.marcel@holtmann.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When using --disable-virglrenderer, QEMU still creates
hw-display-virtio-gpu-gl.so
hw-display-virtio-vga-gl.so
hw-display-virtio-gpu-pci-gl.so
but when these are loaded, they provide no functionality as the code
which registers types is not compiled in. Funtionally this is
relatively harmless, because QEMU is fine loading a module with no
types.
This is rather confusing for users and OS distro maintainers though,
as they think they have the GL functionality built, but in fact the
module they are looking at provides nothing of value.
The root cause is the use of 'when/if_true' rules when adding sources
to the module source set. If all the rules evaluate to false, then we
have declared the module, but not added anything to it. We need to
put declaration of the entire module inside a condition based on
existance of the 3rd party library deps that are mandatory.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1352
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219125830.2369169-1-berrange@redhat.com>
[Do not check for pixman. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We've been very gradually adding G_GNUC_PRINTF annotations
to functions over years. This has been useful in detecting
certain malformed printf strings, or cases where we pass
user data as the printf format which is a potential security
flaw.
Given the inherant memory corruption danger in use of format
strings vs mis-matched variadic arguments, it is worth applying
G_GNUC_PRINTF to all functions using printf, even if we know
they are safe.
The compilers can reasonably reliably identify such places
with the -Wsuggest-attribute=format / -Wmissing-format-attribute
flags.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219130205.687815-7-berrange@redhat.com>
[-Wsuggest-attribute=format and -Wmissing-format-attribute are
synonyms, only include one; disable it for testfloat. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219130205.687815-6-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221219130205.687815-5-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219130205.687815-4-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20221219130205.687815-3-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219130205.687815-2-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The PKG_CONFIG_PATH variable is not defined in GitLab CI
envs and even if it was, we don't need to set it to its
existing value.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221103173044.3969425-2-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace HAVE_CHARDEV_PARPORT with a Meson conditional, remove unnecessary
defines, and close the file descriptor on FreeBSD/DragonFly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To avoid compilation errors when -Werror=maybe-uninitialized is used,
add a default case with g_assert_not_reached().
Otherwise with GCC 11.3.1 "cc (GCC) 11.3.1 20220421 (Red Hat 11.3.1-2)"
we get:
../target/i386/ops_sse.h: In function ‘helper_vpermdq_ymm’:
../target/i386/ops_sse.h:2495:13: error: ‘r3’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
2495 | d->Q(3) = r3;
| ~~~~~~~~^~~~
../target/i386/ops_sse.h:2494:13: error: ‘r2’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
2494 | d->Q(2) = r2;
| ~~~~~~~~^~~~
../target/i386/ops_sse.h:2493:13: error: ‘r1’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
2493 | d->Q(1) = r1;
| ~~~~~~~~^~~~
../target/i386/ops_sse.h:2492:13: error: ‘r0’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
2492 | d->Q(0) = r0;
| ~~~~~~~~^~~~
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221222140158.1260748-1-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we update an existing memslot (e.g., resize, split), we temporarily
remove the memslot to re-add it immediately afterwards. These updates
are not atomic, especially not for KVM VCPU threads, such that we can
get spurious faults.
Let's inhibit most KVM ioctls while performing relevant updates, such
that we can perform the update just as if it would happen atomically
without additional kernel support.
We capture the add/del changes and apply them in the notifier commit
stage instead. There, we can check for overlaps and perform the ioctl
inhibiting only if really required (-> overlap).
To keep things simple we don't perform additional checks that wouldn't
actually result in an overlap -- such as !RAM memory regions in some
cases (see kvm_set_phys_mem()).
To minimize cache-line bouncing, use a separate indicator
(in_ioctl_lock) per CPU. Also, make sure to hold the kvm_slots_lock
while performing both actions (removing+re-adding).
We have to wait until all IOCTLs were exited and block new ones from
getting executed.
This approach cannot result in a deadlock as long as the inhibitor does
not hold any locks that might hinder an IOCTL from getting finished and
exited - something fairly unusual. The inhibitor will always hold the BQL.
AFAIKs, one possible candidate would be userfaultfd. If a page cannot be
placed (e.g., during postcopy), because we're waiting for a lock, or if the
userfaultfd thread cannot process a fault, because it is waiting for a
lock, there could be a deadlock. However, the BQL is not applicable here,
because any other guest memory access while holding the BQL would already
result in a deadlock.
Nothing else in the kernel should block forever and wait for userspace
intervention.
Note: pause_all_vcpus()/resume_all_vcpus() or
start_exclusive()/end_exclusive() cannot be used, as they either drop
the BQL or require to be called without the BQL - something inhibitors
cannot handle. We need a low-level locking mechanism that is
deadlock-free even when not releasing the BQL.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20221111154758.1372674-4-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using the new accel-blocker API, mark where ioctls are being called
in KVM. Next, we will implement the critical section that will take
care of performing memslots modifications atomically, therefore
preventing any new ioctl from running and allowing the running ones
to finish.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20221111154758.1372674-3-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This API allows the accelerators to prevent vcpus from issuing
new ioctls while execting a critical section marked with the
accel_ioctl_inhibit_begin/end functions.
Note that all functions submitting ioctls must mark where the
ioctl is being called with accel_{cpu_}ioctl_begin/end().
This API requires the caller to always hold the BQL.
API documentation is in sysemu/accel-blocker.h
Internally, it uses a QemuLockCnt together with a per-CPU QemuLockCnt
(to minimize cache line bouncing) to keep avoid that new ioctls
run when the critical section starts, and a QemuEvent to wait
that all running ioctls finish.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221111154758.1372674-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When in 64-bit mode, IDT entiries are 16 bytes, so `intno * 16` is used
for base/limit/offset calculations. However, even in 64-bit mode, the
exception error code still uses bits [3,16) for the invlaid interrupt
index.
This means the error code should still be `intno * 8 + 2` even in 64-bit
mode.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1382
Signed-off-by: Joe Richey <joerichey@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
configure uses "pkg-config" directly so that GLIB_VERSION is always based
on host glib version. To correctly handle cross-compilation it should use
"$pkg_config" and take GLIB_VERSION from the cross-compiled glib.
Reported-by: Валентин <val15032008@mail.ru>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1414
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the local Error variable with errp and ERRP_GUARD() and change
the return value to bool.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Remove an unnecessary local Error value in nvme_realize(). In the
process, change nvme_check_constraints() to return a bool.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
* Rework and improvements of the EINTR handling by Nikita
* Deprecate the -no-hpet command line option
* Disable the qtests in the 32-bit Windows CI job again
* Some other misc fixes here and there
-----BEGIN PGP SIGNATURE-----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=D+Yw
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu into staging
* s390x header clean-ups from Philippe
* Rework and improvements of the EINTR handling by Nikita
* Deprecate the -no-hpet command line option
* Disable the qtests in the 32-bit Windows CI job again
* Some other misc fixes here and there
# gpg: Signature made Mon 09 Jan 2023 14:21:19 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/windows: Do not run the qtests in the msys2-32bit job
error handling: Use RETRY_ON_EINTR() macro where applicable
Refactoring: refactor TFR() macro to RETRY_ON_EINTR()
docs/interop: Change the vnc-ledstate-Pseudo-encoding doc into .rst
i386: Deprecate the -no-hpet QEMU command line option
tests/qtest/bios-tables-test: Replace -no-hpet with hpet=off machine parameter
tests/readconfig: spice doesn't support unix socket on windows yet
target/s390x: Restrict sysemu/reset.h to system emulation
target/s390x/tcg/excp_helper: Restrict system headers to sysemu
target/s390x/tcg/misc_helper: Remove unused "memory.h" include
hw/s390x/pv: Restrict Protected Virtualization to sysemu
exec/memory: Expose memory_region_access_valid()
MAINTAINERS: Add MIPS-related docs and configs to the MIPS architecture section
tests/vm: Update get_default_jobs() to work on non-x86_64 non-KVM hosts
qemu-iotests/stream-under-throttle: do not shutdown QEMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qtests are not stable in the msys2-32bit job yet - especially
the test-hmp and the qom-test are failing randomly. Until this is
fixed, let's better disable the qtests here again to avoid failing
CI tests.
Message-Id: <20230105204819.26992-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is a defined RETRY_ON_EINTR() macro in qemu/osdep.h
which handles the same while loop.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/415
Signed-off-by: Nikita Ivanov <nivanov@cloudlinux.com>
Message-Id: <20221023090422.242617-3-nivanov@cloudlinux.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[thuth: Dropped the hunk that changed socket_accept() in libqtest.c]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Rename macro name to more transparent one and refactor
it to expression.
Signed-off-by: Nikita Ivanov <nivanov@cloudlinux.com>
Message-Id: <20221023090422.242617-2-nivanov@cloudlinux.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The file seems to contain perfectly valid rst syntax already, so
rename it to .rst and wire it up in the index.
Message-Id: <20221213101806.46640-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The HPET setting has been turned into a machine property a while ago
already, so we should finally do the next step and deprecate the
legacy CLI option, too.
Message-Id: <20221229114913.260400-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are going to deprecate (and finally remove later) the -no-hpet command
line option. Prepare the bios-tables-test by using the replacement hpet=off
machine parameter instead.
Message-Id: <20230109081205.116369-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In user emulation, threads -- implemented as CPU -- are
created/destroyed, but never reset. There is no point in
allowing the user emulation access the sysemu/reset API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221220145625.26392-5-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-6-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
