Commit Graph

563 Commits

Author SHA1 Message Date
Blue Swirl 1c7242da85 MIPS: fix yield handling
The parameter for yield should be handled as a signed integer
for the comparisons to have any effect.

This also avoids a gcc warning with -Wtype-limits.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-18 05:53:15 +00:00
Edgar E. Iglesias 138afb024b mips: Add support for VInt and VEIC irq modes
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2010-08-06 12:21:16 +02:00
Hervé Poussineau 671b0f368b Correctly identify multiple cpus in SMP systems
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-31 17:14:52 +02:00
Hervé Poussineau cf7c00d5c6 Remove unused constant
Remove unused constant MIPS_FCR0

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-31 17:14:51 +02:00
Aurelien Jarno 5dc5d9f055 mips: more fixes to the MIPS interrupt glue logic
Commit 36388314fe moved most of the
interrupt logic to cpu-exec.c. Remove the remaining useless code
and fix software interrupts.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Edgar E. Iglesias <edgar@axis.com>
Tested-by: Edgar E. Iglesias <edgar@axis.com>
2010-07-25 16:54:02 +02:00
Edgar E. Iglesias 36388314fe mips: Correct MIPS interrupt glue logic for icount
When hw interrupt pending bits in CP0_Cause are set, the CPU should
see the hw interrupt line as active. The CPU may or may not take the
interrupt based on internal state (global irq mask etc) but the glue
logic shouldn't care.

This fixes MIPS external hw interrupts in combination with -icount.

Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2010-07-24 13:40:05 +02:00
Aurelien Jarno 3fc00a7bde target-mips: fix xtlb exception for loongson
Loongson 2E and 2F use the same entry for xtlb and tlb exception, at
offset 0x000.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-17 16:13:12 +02:00
Aurelien Jarno 161f85e6b1 target-mips: add loongson 2E & 2F integer instructions
This patch adds support for loongson 2E & 2F instructions. They are the
same instructions, but differ by the opcode encoding.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-11 10:24:31 +02:00
Paolo Bonzini a88790a14f remove exec-all.h inclusion from cpu.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03 09:48:24 +03:00
Paolo Bonzini 10eb0cc03c move cpu_pc_from_tb to target-*/exec.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03 09:48:12 +03:00
Paolo Bonzini 83dae09588 remove unused stuff from */exec.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03 06:47:13 +00:00
Aurelien Jarno afa88c3ae5 target-mips: add Loongson support prefetch
Loongson CPU uses a load to zero register for prefetch.
Emulate it as a NOP.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-01 23:45:28 +02:00
Aurelien Jarno 5c13fdfd03 target-mips: split load and store
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-01 07:48:17 +02:00
Aurelien Jarno 6fbab86925 target-mips: fix DINSU instruction
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:00:31 +02:00
Aurelien Jarno aa8f40090a target-mips: enable movn/movz on loongson 2E & 2F
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:26:34 +02:00
Huacai Chen 5bc6fba851 MIPS: Initial support of fulong mini pc (CPU definition)
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:52 +02:00
Stefan Weil 3308759844 target-mips: Fix compilation
TCGv t1 needs tcg_temp_free instead of tcg_temp_free_i32.

Cc: Nathan Froyd <froydnj@codesourcery.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 23:37:36 +02:00
Nathan Froyd bbfa8f72e9 target-mips: add microMIPS exception handler support
Unlike MIPS16, microMIPS lets you choose the ISA mode for your exception
handlers.  The ISA mode is selectable via a user-writable CP0.Config3
flag.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 16:10:51 +02:00
Nathan Froyd 3c824109da target-mips: microMIPS ASE support
Add instruction decoding for the microMIPS ASE.  All we do is decode and
then forward to the existing gen_* routines.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 16:10:50 +02:00
Nathan Froyd 620e48f663 target-mips: mips16 cleanups
Change code handling mips16-specific branches to use ISA-neutral special
opcodes.  Since there are several places where the delay slot
requirements for microMIPS branches differ from mips16 branches, using
opcodes is easier than checking hflags, then checking mips16
vs. microMIPS.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 16:10:50 +02:00
Nathan Froyd 8153667c71 target-mips: refactor c{, abs}.cond.fmt insns
Move all knowledge about coprocessor-checking and register numbering
into the gen_cmp* helper functions.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 16:10:50 +02:00
Aurelien Jarno e459440a89 target-mips: move FP FMT comments closer to the definitions
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 16:10:50 +02:00
Nathan Froyd bf4120adaa target-mips: define constants for magic numbers
Add FMT_* constants for the floating-point format field in opcodes and
tweak a few places to use them.  Add enums for various invocations of
FOP and tweak gen_farith and its lone caller accordingly.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 16:10:50 +02:00
Nathan Froyd 26ebe46848 target-mips: break out [ls][wd]c1 and rdhwr insn generation
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-08 19:15:08 +02:00
Richard Henderson 564856bb97 target-mips: Remove duplicate CPU log.
Logging for -d cpu is done in generic code.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-05 12:20:05 +02:00
Stefan Weil 2a5612e6a3 target-mips: Fix format specifiers for fpu_fprintf
In the previous patch which introduced fprintf_function to
allow parameter checking by gcc some compiler warnings
remained unfixed.

These warnings are fixed here.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-09 21:53:23 +02:00
Stefan Weil a7200c9f98 target-mips: Fix one more format specifier for cpu_fprintf
env->bcond must be printed using TARGET_FMT_ld.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-08 21:46:57 +02:00
Paolo Bonzini 1a7ff92218 remove TARGET_* defines from translate-all.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-08 21:34:12 +02:00
Paul Brook d4c430a80f Large page TLB flush
QEMU uses a fixed page size for the CPU TLB.  If the guest uses large
pages then we effectively split these into multiple smaller pages, and
populate the corresponding TLB entries on demand.

When the guest invalidates the TLB by virtual address we must invalidate
all entries covered by the large page.  However the address used to
invalidate the entry may not be present in the QEMU TLB, so we do not
know which regions to clear.

Implementing a full vaiable size TLB is hard and slow, so just keep a
simple address/mask pair to record which addresses may have been mapped by
large pages.  If the guest invalidates this region then flush the
whole TLB.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-17 02:44:41 +00:00
Aurelien Jarno 30724e758a target-mips: update address space definitions
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-13 11:35:55 +01:00
Paul Brook 3c7b48b74c Target specific usermode cleanup
Disable various target specific code that is only relevant to system emulation.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-12 18:44:24 +00:00
Paul Brook 4fcc562bff Remove cpu_get_phys_page_debug from userspace emulation
cpu_get_phys_page_debug makes no sense for userspace emulation, so remove it.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-12 18:34:25 +00:00
Richard Henderson 5270589032 Move TARGET_PHYS_ADDR_SPACE_BITS to target-*/cpu.h.
Removes a set of ifdefs from exec.c.

Introduce TARGET_VIRT_ADDR_SPACE_BITS for all targets other
than Alpha.  This will be used for page_find_alloc, which is
supposed to be using virtual addresses in the first place.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2010-03-12 16:28:24 +00:00
Aurelien Jarno deb4203dc9 target-mips: use newer logical ops
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-04 17:42:03 +01:00
Aurelien Jarno e68dd28fd7 target-mips: use setcond when possible
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-02 23:16:56 +01:00
Nathan Froyd 3399e30f56 target-mips: fix ROTR and DROTR by zero
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-23 19:47:25 +01:00
Nathan Froyd c2c65dab45 target-mips: fix CpU exception for coprocessor 0
When we signal a CpU exception for coprocessor 0, we should indicate
that it's for coprocessor 0 instead of coprocessor 1.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-23 19:47:24 +01:00
Aurelien Jarno 6462bfcded target-mips: remove useless sign extension
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-23 19:47:24 +01:00
Aurelien Jarno c36bbb28ad target-mips: don't call cpu_loop_exit() from helper.c
In helper.c AREG0 may not correspond do env, so it's not possible to
call cpu_loop_exit() here. Call it from op_helper.c instead.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-06 17:23:33 +01:00
Paolo Bonzini 49a945a3c0 kill regs_to_env and env_to_regs
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-19 16:31:02 -06:00
Stefan Weil ab3aee26c4 target-mips: No MIPS16 support for 4Kc, 4KEc cores
Fix regression introduced by d19954f46d.

4Kc and 4KEc don't support MIPS16.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-17 00:28:58 +01:00
Stefan Weil 73642f5bdb target-mips: 4Kc, 4KEc cores do not support MIPS16
4Kc, 4KEc cores do not support MIPS16, so not only the
CP0_Config1 had to be fixed (see previous patch),
but also MIPS16 instructions must not be executed.

(Hint from Nathan Froyd, thanks).

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-16 18:20:19 +01:00
Nathan Froyd 91a7593526 target-mips: fix user-mode emulation startup
Running programs with the MIPS user-mode emulator fails during dynamic
loading, as floating-point instructions are not enabled in in
env->hflags.  Move the code for doing so from fpu_init to cpu_reset so
the MIPS_HFLAG_{FPU,F64} setting doesn't get clobbered by cpu_reset
setting env->hflags to MIPS_HFLAG_UM.

The same end can be achieved by swapping the ordering of fpu_init and
cpu_reset in cpu_mips_init, but it seemed better to consolidate the
CONFIG_USER_ONLY code into a single location.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13 21:01:33 +01:00
Nathan Froyd d19954f46d target-mips: set Config1.CA for MIPS16-aware CPUs
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13 20:20:20 +01:00
Nathan Froyd 9da53be7ea target-mips: add copyright notice for mips16 work
Also cross off mips16 ASE in TODO.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13 20:20:20 +01:00
Nathan Froyd 364d48314a target-mips: add mips16 instruction decoding
There's no good way to add this incrementally, so we do it all at once.
The only changes to shared code are in handle_delay_slot.  We need to
flip ISAMode when doing a jump-and-exchange.  We also need to set
ISAMode the low bit of the target address for jump-to-register.

Also, since we're now adding bits that can be in MIPS_HFLAG_BMASK_EXT,
make sure we use MIPS_HFLAG_BMASK_BASE in the places where we just want
basic information about a branch.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13 20:20:20 +01:00
Nathan Froyd 6ea219d019 target-mips: add enums for MIPS16 opcodes
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13 20:20:20 +01:00
Nathan Froyd c960206137 target-mips: split out delay slot handling
Move delay slot handling to common code whose invocation can be
controlled from gen_intermediate_code_internal.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13 20:20:19 +01:00
Nathan Froyd 662d748516 target-mips: add gen_base_offset_addr
This is a common pattern in existing code.  We'll also use it to
implement the mips16 SAVE/RESTORE instructions.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13 20:20:19 +01:00
Nathan Froyd 7dca4ad050 target-mips: make gen_compute_branch 16/32-bit-aware
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13 20:20:19 +01:00