According to Kevin, tests 030, 040 and 041 are among the most valuable
tests that we have, so we should always run them if possible, even if
they take a little bit longer.
According to Max, it would be good to have a test for iothreads and
migration. 127 and 256 seem to be good candidates for iothreads. For
migration, let's enable 181 and 203 (which also tests iothreads).
(091 would be a good candidate for migration, too, but Alex Bennée
reported that this test fails on ZFS file systems, so it can't be
included yet)
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-7-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to enable some of the python-based tests in the "auto" group,
and these tests require virtio-blk to work properly. Running iotests
without virtio-blk likely does not make too much sense anyway, so instead
of adding a check for the availability of virtio-blk to each and every
test (which does not sound very appealing), let's rather add a check for
this a central spot in the "check" script instead (so that it is still
possible to run "make check" for qemu-system-tricore for example).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-6-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to enable 127 in the "auto" group, but it only works if
virtio-scsi and scsi-hd are available - which is not the case with
QEMU binaries like qemu-system-tricore for example, so we need a
proper check for the availability of these devices here.
A very similar problem exists in iotest 267 - it has been added to
the "auto" group already, but requires virtio-blk and thus currently
fails with qemu-system-tricore for example. Let's also add aproper
check there.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-5-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In the long run, we might want to add test 183 to the "auto" group
(but it still fails occasionally, so we cannot do that yet). However,
when running 183 in Cirrus-CI on macOS, or with our vm-build-openbsd
target, it currently always fails with an "Timeout waiting for return
on handle 0" error.
Let's mark it as supported only on systems where the test is working
most of the time (i.e. Linux, FreeBSD and NetBSD).
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-4-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
041 works fine on Linux, FreeBSD, NetBSD and OpenBSD, but fails on macOS.
Let's mark it as only supported on the systems where we know that it is
working fine.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-3-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
verify_platform will check an explicit whitelist and blacklist instead.
The default will now be assumed to be allowed to run anywhere.
For tests that do not specify their platforms explicitly, this has the effect of
enabling these tests on non-linux platforms. For tests that always specified
linux explicitly, there is no change.
For Python tests on FreeBSD at least; only seven python tests fail:
045 147 149 169 194 199 211
045 and 149 appear to be misconfigurations,
147 and 194 are the AF_UNIX path too long error,
169 and 199 are bitmap migration bugs, and
211 is a bug that shows up on Linux platforms, too.
This is at least good evidence that these tests are not Linux-only. If
they aren't suitable for other platforms, they should be disabled on a
per-platform basis as appropriate.
Therefore, let's switch these on and deal with the failures.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20200121095205.26323-2-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Allow blockdevs to match the feature already present in qemu-nbd -D.
Enhance iotest 223 to cover it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191114024635.11363-5-eblake@redhat.com>
Otherwise we end up failing to build our tests on CI which may have
older compilers that the user expects. We can get rid of this once we
can fallback to multiarch containers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-14-alex.bennee@linaro.org>
We will need this for some tests later. The docker images already
support it by default.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200203090932.19147-13-alex.bennee@linaro.org>
When we are copying we want to ensure we grab the first
resolution (the found in path section). However even that binary might
be a symlink so lets make sure we chase the symlinks to copy the right
binary to where it can be found.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200203090932.19147-3-alex.bennee@linaro.org>
This includes fixing up the dependencies (Which were already wrong for
one of the mips variants).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200203090932.19147-2-alex.bennee@linaro.org>
Update comments in tests/qtest/bios-tables-test.c to reflect the
current path of bios-tables-test-allowed-diff.h, which is now under
tests/qtest/ as well.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-Id: <20200202110009.51479-1-guoheyi@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's not a big deal, but 'check qtest-ppc/ppc64' runs fail if sanitizers is enabled.
The memory leak stack is as follow:
Direct leak of 128 byte(s) in 4 object(s) allocated from:
#0 0x7f11756f5970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970)
#1 0x7f1174f2549d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d)
#2 0x556af05aa7da in mm_fw_cfg_init /mnt/sdb/qemu/tests/libqos/fw_cfg.c:119
#3 0x556af059f4f5 in read_boot_order_pmac /mnt/sdb/qemu/tests/boot-order-test.c:137
#4 0x556af059efe2 in test_a_boot_order /mnt/sdb/qemu/tests/boot-order-test.c:47
#5 0x556af059f2c0 in test_boot_orders /mnt/sdb/qemu/tests/boot-order-test.c:59
#6 0x556af059f52d in test_pmac_oldworld_boot_order /mnt/sdb/qemu/tests/boot-order-test.c:152
#7 0x7f1174f46cb9 (/lib64/libglib-2.0.so.0+0x73cb9)
#8 0x7f1174f46b73 (/lib64/libglib-2.0.so.0+0x73b73)
#9 0x7f1174f46b73 (/lib64/libglib-2.0.so.0+0x73b73)
#10 0x7f1174f46f71 in g_test_run_suite (/lib64/libglib-2.0.so.0+0x73f71)
#11 0x7f1174f46f94 in g_test_run (/lib64/libglib-2.0.so.0+0x73f94)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200203025935.36228-1-pannengyuan@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qos dependency files can be found under tests/qtest/libqos and
not under tests/qtest/qos.
Fixes: 1cf4323ecd ("Move the libqos files under tests/qtest/")
Message-Id: <20200127140245.20065-1-thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
vhost-user-bridge isn't actually a test, it's just a helper
(that should probably move somewhere else) - but the build was
broken in the qtest move.
Fixes: 833884f37a
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200117122648.137862-1-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Checking for uninitialized variables raises warning for file path
variables in test_logfile_write and test_logfile_lock functions.
To suppress this warning, initialize varibles to NULL. This is safe
change as result of g_build_filename is stored to them before any usage.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <63b0fcedf7dfe799c8210b113e5dccf32414a89d.1579598240.git.mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some default features of the pseries machine are only available with
KVM. Warnings are printed when the pseries machine is used with another
accelerator:
qemu-system-ppc64: warning: TCG doesn't support requested feature,
cap-ccf-assist=on
qemu-system-ppc64: warning: Firmware Assisted Non-Maskable
Interrupts(FWNMI) not supported in TCG
qemu-system-ppc64: warning: TCG doesn't support requested feature,
cap-ccf-assist=on
qemu-system-ppc64: warning: Firmware Assisted Non-Maskable
Interrupts(FWNMI) not supported in TCG
qemu-system-ppc64: warning: TCG doesn't support requested feature,
cap-ccf-assist=on
qemu-system-ppc64: warning: Firmware Assisted Non-Maskable
Interrupts(FWNMI) not supported in TCG
This is annoying for CI since it usually runs without KVM. We already
disable features that emit similar warnings thanks to properties of
the pseries machine, but this is open-coded in various
places. Consolidate the set of properties in a single place. Extend it
to silence the above warnings. And use it in the various tests that
start pseries machines.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158059697130.1820292.7823434132030453110.stgit@bahia.lan>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[dwg: Correct minor grammatical error]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It's been deprecated since QEMU v3.1. The 40p machine should be
used nowadays instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114114617.28854-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
kvm-no-adjvtime is a KVM specific CPU property and a first of its
kind. To accommodate it we also add kvm_arm_add_vcpu_properties()
and a KVM specific CPU properties description to the CPU features
document.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200120101023.16030-7-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we know what the default value should be then we can test for
that as well as the feature existence.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200120101023.16030-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds support of Resettable interface to buses and devices:
+ ResettableState structure is added in the Bus/Device state
+ Resettable methods are implemented.
+ device/bus_is_in_reset function defined
This commit allows to transition the objects to the new
multi-phase interface without changing the reset behavior at all.
Object single reset method can be split into the 3 different phases
but the 3 phases are still executed in a row for a given object.
From the qdev/qbus reset api point of view, nothing is changed.
qdev_reset_all() and qbus_reset_all() are not modified as well as
device_legacy_reset().
Transition of an object must be done from parent class to child class.
Care has been taken to allow the transition of a parent class
without requiring the child classes to be transitioned at the same
time. Note that SysBus and SysBusDevice class do not need any transition
because they do not override the legacy reset method.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200123132823.1117486-5-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=X4Ax
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/pull-migration-pull-request' into staging
Migration pull request
# gpg: Signature made Wed 29 Jan 2020 10:57:23 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/pull-migration-pull-request:
migration/compress: compress QEMUFile is not writable
migration: Simplify get_qlist
multifd: Split multifd code into its own file
multifd: Make multifd_load_setup() get an Error parameter
multifd: Make multifd_save_setup() get an Error parameter
migration: Make checkpatch happy with comments
multifd: Use qemu_target_page_size()
multifd: multifd_send_sync_main only needs the qemufile
multifd: multifd_queue_page only needs the qemufile
multifd: multifd_send_pages only needs the qemufile
ram_addr: Split RAMBlock definition
migration/multifd: fix nullptr access in multifd_send_terminate_threads
migration: Create migration_is_running()
migration-test: Make sure that multifd and cancel works
migration: Don't send data if we have stopped
qemu-file: Don't do IO after shutdown
multifd: Make sure that we don't do any IO after an error
migration-test: Use g_free() instead of free()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test that this sequence works:
- launch source
- launch target
- start migration
- cancel migration
- relaunch target
- do migration again
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add Artist graphics
Fix main memory allocation
Improve LDCW emulation wrt real hw
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl4vMa8dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/3PwgAmw+Q/rT2kT19vMHd
1XHjK1WJNx4SFRQWxwMsbxDoWyFslUZH5G0z0l7zB1eG7ONEZBttUVyOVnyPH5Q5
DUmfHMvS838lHkLU+OWPbfbwB8WZzfwUwHi3u8ljRBM52RZYf+m69/yMRd8H+PmF
bDq3zCviAqvIIvWdSmPEfsx9v4WmrE2aULkKN2aZsHYHzkuHmPWfSYe2dzxTcO3z
zDXoscUVmtVk29jpwHV4gM7zl9uk8jyvfeeB2fZ2/EY4qgZ+iHrhtnglfCdCCDr0
G1Q5vugJ70lFkYM2EzpyU+leHUREXN7xqYm5Iycv4neO+aS2FFkNpxCZvPofihHo
rUFcOw==
=kj86
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-pa-20200127' into staging
Improve LASI emulation
Add Artist graphics
Fix main memory allocation
Improve LDCW emulation wrt real hw
# gpg: Signature made Mon 27 Jan 2020 18:53:35 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-pa-20200127:
target/hppa: Allow, but diagnose, LDCW aligned only mod 4
hw/hppa/machine: Map the PDC memory region with higher priority
hw/hppa/machine: Restrict the total memory size to 3GB
hw/hppa/machine: Correctly check the firmware is in PDC range
hppa: Add emulation of Artist graphics
seabios-hppa: update to latest version
hppa: Switch to tulip NIC by default
hppa: add emulation of LASI PS2 controllers
ps2: accept 'Set Key Make and Break' commands
hppa: Add support for LASI chip with i82596 NIC
hw/hppa/dino.c: Improve emulation of Dino PCI chip
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fuzzing the Linux kernel with syzkaller allowed to find how to crash qemu
using a special SCSI_IOCTL_SEND_COMMAND. It hits the assertion in
ide_dma_cb() introduced in the commit a718978ed5 in July 2015.
Currently this bug is not reproduced by the unit tests.
Let's improve the ide-test to cover more PRDT cases including one
that causes this particular qemu crash.
The test is developed according to the Programming Interface for
Bus Master IDE Controller (Revision 1.0 5/16/94).
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Message-id: 20191223175117.508990-3-alex.popov@linux.com
Signed-off-by: John Snow <jsnow@redhat.com>
This adds emulation of Artist graphics good enough to get a text
console on both Linux and HP-UX. The X11 server from HP-UX also works.
Adjust boot-serial-test to disable graphics, so that SeaBIOS outputs
to the serial port, as expected by the test.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-6-svens@stackframe.org>
[rth: Merge Helge's test for machine->enable_graphics]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Includes the following tests:
- Adding a dirty bitmap.
* RHBZ: 1782175
- Starting a drive-mirror to an NBD-backed target.
* RHBZ: 1746217, 1773517
- Aborting an external snapshot transaction.
* RHBZ: 1779036
- Aborting a blockdev backup transaction.
* RHBZ: 1782111
For each one of them, a VM with a number of disks running in an
IOThread AioContext is used.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Issuing a drive-backup from qmp_drive_backup takes a slightly
different path than when it's issued from a transaction. In the code,
this is manifested as some redundancy between do_drive_backup() and
drive_backup_prepare().
This change unifies both paths, merging do_drive_backup() and
drive_backup_prepare(), and changing qmp_drive_backup() to create a
transaction instead of calling do_backup_common() direcly.
As a side-effect, now qmp_drive_backup() is executed inside a drained
section, as it happens when creating a drive-backup transaction. This
change is visible from the user's perspective, as the job gets paused
and immediately resumed before starting the actual work.
Also fix tests 141, 185 and 219 to cope with the extra
JOB_STATUS_CHANGE lines.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The python code already contains a possibility to skip tests if the
corresponding driver is not available in the qemu binary - use it
in more spots to avoid that the tests are failing if the driver has
been disabled.
While we're at it, we can now also remove some of the old checks that
were using iotests.supports_quorum() - and which were apparently not
working as expected since the tests aborted instead of being skipped
when "quorum" was missing in the QEMU binary.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The "migration completed" event may be sent (on the source, to be
specific) before the migration is actually completed, so the VM runstate
will still be "finish-migrate" instead of "postmigrate". So ask the
users of VM.wait_migration() to specify the final runstate they desire
and then poll the VM until it has reached that state. (This should be
over very quickly, so busy polling is fine.)
Without this patch, I see intermittent failures in the new iotest 280
under high system load. I have not yet seen such failures with other
iotests that use VM.wait_migration() and query-status afterwards, but
maybe they just occur even more rarely, or it is because they also wait
on the destination VM to be running.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeK1CXAAoJEL/70l94x66DXtkIAI6W5wEY0Yme4M9Q5mGc0RV8
uscPLg0wsg88u6xne8ucCiGymvDREym2ii/aVI0Hi5ish84ZMdCrdck9cd+llpMf
+a3slL26AKlOW8WtYSuyAE1RdLFXngeXdwal5KtWPEExJorkDUPTbwhBzQduQK1a
myoHHcbwdd/96v7FvKnfG8jM6KZtHPQQ0i6+6fX4PN44jaULQNjze8GIrRBEwqw5
uCKJFQPBXiVcxKjH5/kzI1vl2hLJbF2ZGVEzX/U8OPZwyGPHIkWquURo8lvUTPfb
ySlNTUTV2CyrN65TBRXQp/mJi44WvME5Jxlf5rNLBaYXPpL0zhmILKn5X5ya4U0=
=TD0Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (58 commits)
build-sys: clean up flags included in the linker command line
target/i386: Add the 'model-id' for Skylake -v3 CPU models
qdev: use object_property_help()
qapi/qmp: add ObjectPropertyInfo.default-value
qom: introduce object_property_help()
qom: simplify qmp_device_list_properties()
vl: print default value in object help
qdev: register properties as class properties
qdev: move instance properties to class properties
qdev: rename DeviceClass.props
qdev: set properties with device_class_set_props()
object: return self in object_ref()
object: release all props
object: add object_class_property_add_link()
object: express const link with link property
object: add direct link flag
object: rename link "child" to "target"
object: check strong flag with &
object: do not free class properties
object: add object_property_set_default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the set of operations and test described in LP 1859713.
Suggested-by: Adrien GRASSEIN <adrien.grassein@smile.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200116230809.19078-5-richard.henderson@linaro.org
[PMM: fixed hard-coded tabs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the test vector from the QARMA paper, run through PACGA.
Suggested-by: Vincent Dehors <vincent.dehors@smile.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200116230809.19078-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly requiring ARMv8.4 support for the pauth
tests, but Pointer Authentication is an ARMv8.3 extension.
Further, hiding the required architecture within asm() is
not correct.
Correct the architecture version requested, and specify it
in the cflags of the (cross-) compiler rather than in the asm.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200116230809.19078-3-richard.henderson@linaro.org
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per the ACPI spec (version 6.1, section 6.1.5 _HID) it is not required
on enumerated buses (like PCI in this case), _ADR is required (and is
already there). And the _HID value is wrong. Linux appears to ignore
the _HID entry, but Windows 10 detects it as 'Unknown Device' and there
is no driver available. See https://bugs.launchpad.net/qemu/+bug/1856724
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200120170725.24935-6-minyard@acm.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
test lockable SMRAM at default SMBASE feature, introduced by
patch "q35: implement 128K SMRAM at default SMBASE address"
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1575899217-333105-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support QLIST migration using the same principle as QTAILQ:
94869d5c52 ("migration: migrate QTAILQ").
The VMSTATE_QLIST_V macro has the same proto as VMSTATE_QTAILQ_V.
The change mainly resides in QLIST RAW macros: QLIST_RAW_INSERT_HEAD
and QLIST_RAW_REVERSE.
Tests also are provided.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We set multifd-channels.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Some allwinner-a10 code cleanup
New test cases for cubieboard
target/arm/arm-semi: fix SYS_OPEN to return nonzero filehandle
i.MX: add an emulation for RNGC device
target/arm: adjust program counter for wfi exception in AArch32
arm/gicv3: update virtual irq state after IAR register read
Set IL bit correctly for syndrome information for data aborts
-----BEGIN PGP SIGNATURE-----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=R9Xb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200117-1' into staging
Add model of the Netduino Plus 2 board
Some allwinner-a10 code cleanup
New test cases for cubieboard
target/arm/arm-semi: fix SYS_OPEN to return nonzero filehandle
i.MX: add an emulation for RNGC device
target/arm: adjust program counter for wfi exception in AArch32
arm/gicv3: update virtual irq state after IAR register read
Set IL bit correctly for syndrome information for data aborts
# gpg: Signature made Fri 17 Jan 2020 14:27:40 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200117-1:
target/arm: Set ISSIs16Bit in make_issinfo
target/arm: Return correct IL bit in merge_syn_data_abort
arm/gicv3: update virtual irq state after IAR register read
target/arm: adjust program counter for wfi exception in AArch32
i.MX: add an emulation for RNGC
target/arm/arm-semi: fix SYS_OPEN to return nonzero filehandle
hw/arm/allwinner-a10: Remove local qemu_irq variables
hw/arm/allwinner-a10: Simplify by passing IRQs with qdev_pass_gpios()
hw/arm/allwinner-a10: Move SoC definitions out of header
tests/boot_linux_console: Add a SD card test for the CubieBoard
tests/boot_linux_console: Add initrd test for the CubieBoard
hw/arm: Add the Netduino Plus 2
hw/arm: Add the STM32F4xx SoC
hw/misc: Add the STM32F4xx EXTI device
hw/misc: Add the STM32F4xx Sysconfig device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://docs.armbian.com/Developer-Guide_Build-Preparation/
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t machine:cubieboard tests/acceptance/boot_linux_console.py
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
[...]
console: ahci-sunxi 1c18000.sata: Linked as a consumer to regulator.4
console: ahci-sunxi 1c18000.sata: controller can't do 64bit DMA, forcing 32bit
console: ahci-sunxi 1c18000.sata: AHCI 0001.0000 32 slots 1 ports 1.5 Gbps 0x1 impl platform mode
console: ahci-sunxi 1c18000.sata: flags: ncq only
console: scsi host0: ahci-sunxi
console: ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 27
console: of_cfs_init
console: of_cfs_init: OK
console: vcc3v0: disabling
console: vcc5v0: disabling
console: usb1-vbus: disabling
console: usb2-vbus: disabling
console: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
console: ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
console: ata1.00: 40960 sectors, multi 16: LBA48 NCQ (depth 32)
console: ata1.00: applying bridge limits
console: ata1.00: configured for UDMA/100
console: scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
console: sd 0:0:0:0: Attached scsi generic sg0 type 0
console: sd 0:0:0:0: [sda] 40960 512-byte logical blocks: (21.0 MB/20.0 MiB)
console: sd 0:0:0:0: [sda] Write Protect is off
console: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
console: sd 0:0:0:0: [sda] Attached SCSI disk
console: EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem
console: EXT4-fs (sda): mounted filesystem without journal. Opts: (null)
console: VFS: Mounted root (ext2 filesystem) readonly on device 8:0.
[...]
console: cat /proc/partitions
console: / # cat /proc/partitions
console: major minor #blocks name
console: 1 0 4096 ram0
console: 1 1 4096 ram1
console: 1 2 4096 ram2
console: 1 3 4096 ram3
console: 8 0 20480 sda
console: reboot
console: / # reboot
[...]
console: sd 0:0:0:0: [sda] Synchronizing SCSI cache
console: reboot: Restarting system
PASS (48.39 s)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test boots a Linux kernel on a CubieBoard and verify
the serial output is working.
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://docs.armbian.com/Developer-Guide_Build-Preparation/
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t machine:cubieboard tests/acceptance/boot_linux_console.py
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
console: CPU: ARMv7 Processor [410fc080] revision 0 (ARMv7), cr=50c5387d
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
console: OF: fdt: Machine model: Cubietech Cubieboard
[...]
console: Boot successful.
console: cat /proc/cpuinfo
console: / # cat /proc/cpuinfo
console: processor : 0
console: model name : ARMv7 Processor rev 0 (v7l)
console: BogoMIPS : 832.51
[...]
console: Hardware : Allwinner sun4i/sun5i Families
console: Revision : 0000
console: Serial : 0000000000000000
console: cat /proc/iomem
console: / # cat /proc/iomem
console: 01c00000-01c0002f : system-control@1c00000
console: 01c02000-01c02fff : dma-controller@1c02000
console: 01c05000-01c05fff : spi@1c05000
console: 01c0b080-01c0b093 : mdio@1c0b080
console: 01c0c000-01c0cfff : lcd-controller@1c0c000
console: 01c0d000-01c0dfff : lcd-controller@1c0d000
console: 01c0f000-01c0ffff : mmc@1c0f000
[...]
PASS (54.35 s)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20191230110953.25496-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not allocate resources in case we return early, and make sure
to free dest_cmdline at the end.
Reported-by: Euler Robot <euler.robot@huawei.com>
Reported-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200116140736.9498-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit e51e711b1b has moved the initialization of start_address and
end_address after the definition of the command line argument,
where the nvramrc is initialized, and thus the loop is between 0 and 0
rather than 1 MiB and 100 MiB.
It doesn't affect the result of the test if all the tests are run in
sequence because the two first tests don't run the loop, so the
values are correctly initialized when we actually need them.
But it hangs when we ask to run only one test, for instance:
QTEST_QEMU_BINARY=ppc64-softmmu/qemu-system-ppc64 \
tests/migration-test -m=quick -p /ppc64/migration/validate_uuid_error
Fixes: e51e711b1b ("tests/migration: Add migration-test header file")
Cc: wei@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200107163437.52139-1-lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit 1e8a1fae7464("test: Move qtests to a separate
directory") qtests are now placed in a separate folder and
this breaks the script used to rebuild the expected ACPI
tables for bios-tables-test. Update the script with correct
path.
Fixes: 1e8a1fae7464("test: Move qtests to a separate directory")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114165138.15716-1-shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a sub-module doesn't contain any definitions, we don't generate
code for it, but we do generate the #include.
We generate code only for modules that get visited.
QAPISchema.visit() visits only modules that have definitions. It can
visit modules multiple times.
Clean this up as follows. Collect entities in their QAPISchemaModule.
Have QAPISchema.visit() call QAPISchemaModule.visit() for each module.
Have QAPISchemaModule.visit() call .visit_module() for itself, and
QAPISchemaEntity.visit() for each of its entities. This way, we visit
each module exactly once.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal. Generate it into separate files. This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 5d75648b56 "qapi: Generate QAPIEvent stuff into separate files"
added tests/test-qapi-emit-events.[ch] to the set of generated files,
but neglected to update tests/.gitignore and tests/Makefile.include.
Commit a0af8cee3c "tests/.gitignore: ignore test-qapi-emit-events.[ch]
for in-tree builds" fixed the former. Now fix the latter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
* Build index.html for docs
-----BEGIN PGP SIGNATURE-----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=CchM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-01-12' into staging
* Move qtests into a separate directory
* Build index.html for docs
# gpg: Signature made Sun 12 Jan 2020 11:21:41 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-01-12:
docs: build an index page for the HTML docs
tests/libqos: Move the libqos files under tests/qtest/
tests/Makefile: Move qtest-related settings to a separate Makefile.include
test: Move qtests to a separate directory
tests/Makefile: Separate unit test dependencies from qtest dependencies
tests/Makefile: Remove 'tests/' and '$(EXESUF)' from the check-qtest variables
tests/ptimer: Remove unnecessary inclusion of libqtest.h
tests/Makefile: test-char does not need libqtest
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qos stuff belongs to qtest, so move it into that directory, too.
Message-Id: <20191218103059.11729-8-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
tests/Makefile.include is pretty much overcrowded. Now that we have a
dedicated folder for the qtests, let's move the related settings
to a Makefile.include file in that directory instead.
Message-Id: <20191218103059.11729-7-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.
Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some of the unit test dependencies are declared right in the block of
the qtest dependencies. Let's move them to the other unit tests instead.
Message-Id: <20191218103059.11729-5-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's much easier if we simply add the folder prefix and the exe suffix
later via a substitution instead.
Message-Id: <20191218103059.11729-4-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ptimer-test is a unit test, not a qtest, so libqtest.h is not
required here.
Message-Id: <20191218103059.11729-3-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
No need to link the libqtest objects here.
Message-Id: <20191218103059.11729-2-thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeFbG8AAoJEL/70l94x66DCpMIAKBwxBL+VegqI+ySKgmtIBQX
LtU+ardEeZ37VfWfvuWzTFe+zQ0hsFpz/e0LHE7Ae+LVLMNWXixlmMrTIm+Xs762
hJzxBjhUhkdrMioVYTY16Kqap4Nqaxu70gDQ32Ve2sY6xYGxYLSaJooBOU5bXVgb
HPspHFVpeP6ZshBd1n2LXsgURE6v3AjTwqcsPCkL/AESFdkdOsoHeXjyKWJG1oPy
W7btzlUEqVsauZI8/PhhW/8hZUvUsJVHonYLTZTyy8aklU7aOILSyT2uPXFBVUVQ
irkQjLtD4dWlogBKO4i/QHMuwV+Asa57WNPmqv3EcIWPUWmTY84H0g2AxRgcc2M=
=48jx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Compat machines fix (Denis)
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
# gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (38 commits)
chardev: Use QEMUChrEvent enum in IOEventHandler typedef
chardev: use QEMUChrEvent instead of int
chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler
monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler
monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler
virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler
vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler
ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler
hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler
hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler
hw/ipmi: Remove unnecessary declarations
target/i386: Add missed features to Cooperlake CPU model
target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES
target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub
hw/rtc/mc146818: Add missing dependency on ISA Bus
hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are linux-user users of semihosting so we'd better check things
work for them as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
There are two types of ARM semicall - lets test them both. Putting the
logic in a header will make re-using the functions easier later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We don't run this during check-tcg as we would need to check stuff is
echoed back. However we can still build the binary so people can test
it manually.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Re-calling the main make is counter-productive and really messes up
with parallel builds. Just ensure we have built the pre-requisites
before we build the fp-test bits. If the user builds manually just
complain if the parent build hasn't got the bits we need.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
FreeBSD seems to use python37 by default now, which breaks the build
script. Add python to the package list, to explicitly pick the version,
and also adapt the configure command line.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200106123746.18201-1-kraxel@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum.
By using the enum in the IOEventHandler typedef we:
- make the IOEventHandler type more explicit (this handler
process out-of-band information, while the IOReadHandler
is in-band),
- help static code analyzers.
This patch was produced with the following spatch script:
@match@
expression backend, opaque, context, set_open;
identifier fd_can_read, fd_read, fd_event, be_change;
@@
qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event,
be_change, opaque, context, set_open);
@depends on match@
identifier opaque, event;
identifier match.fd_event;
@@
static
-void fd_event(void *opaque, int event)
+void fd_event(void *opaque, QEMUChrEvent event)
{
...
}
Then the typedef was modified manually in
include/chardev/char-fe.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bugfixes all over the place.
HMAT support.
New flags for vhost-user-blk utility.
Auto-tuning of seg max for virtio storage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl4TaMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpvzgH/2LyDAzCa9h93ikSJjmyUk5FUaqve38daEb3
S3JYjwKxQx7u1ydooKhvBQnBCZ2i3S+k62gfYyKB+nBv8xvjs0Eg5D1YJ5E8hciy
lf5OFGWWtX2iPDjZwQwT13kiJe0o3JRGxJJ6XqTEG+1EYOp7cky/FEv4PD030b9m
I2wROZ/Am+onB9YJX8c0Vv1CG+AryuJNXnvwQzTXEjj4U7bEYUyJwVZaCRyAdWQ3
uYXIZN9VwjVX6BFvy9ZAJbEsUVJvOM1/aQaDqcrLz+VlzRT7bRkKHi2G3vakrm1I
r5OpgyLo84132awCncbSykKDH5o8WaxLaJBjGmuBfasMz9wPzAg=
=uL1o
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci, pc: fixes, features
Bugfixes all over the place.
HMAT support.
New flags for vhost-user-blk utility.
Auto-tuning of seg max for virtio storage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 06 Jan 2020 17:05:05 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (32 commits)
intel_iommu: add present bit check for pasid table entries
intel_iommu: a fix to vtd_find_as_from_bus_num()
virtio-net: delete also control queue when TX/RX deleted
virtio: reset region cache when on queue deletion
virtio-mmio: update queue size on guest write
tests: add virtio-scsi and virtio-blk seg_max_adjust test
virtio: make seg_max virtqueue size dependent
hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35
vhost-user-scsi: reset the device if supported
vhost-user: add VHOST_USER_RESET_DEVICE to reset devices
hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argument
hw/pci/pci_host: Remove redundant PCI_DPRINTF()
virtio-mmio: Clear v2 transport state on soft reset
ACPI: add expected files for HMAT tests (acpihmat)
tests/bios-tables-test: add test cases for ACPI HMAT
tests/numa: Add case for QMP build HMAT
hmat acpi: Build Memory Side Cache Information Structure(s)
hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s)
hmat acpi: Build Memory Proximity Domain Attributes Structure(s)
numa: Extend CLI to provide memory side cache information
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On older versions of glib (anything prior to glib commit 0f056ebe
from May 2019), the implementation of g_source_ref() and
g_source_unref() is not threadsafe for a GSource which is not
attached to a GMainContext.
QEMU's real iothread.c implementation always attaches its
iothread->ctx's GSource to a GMainContext created for that iothread,
so it is OK, but the simple test framework implementation in
tests/iothread.c was not doing this. This was causing intermittent
assertion failures in the test-aio-multithread subtest
"/aio/multi/mutex/contended" test on the BSD hosts. (It's unclear
why only BSD seems to have been affected -- perhaps a combination of
the specific glib version being used in the VMs and their happening
to run on a host with a lot of CPUs).
Borrow the iothread_init_gcontext() from the real iothread.c
and add the corresponding cleanup code and the calls to
g_main_context_push/pop_thread_default() so we actually use
the GMainContext we create.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id: 20200106144552.7205-1-peter.maydell@linaro.org
Hi,
With external processes or helpers participating to the VM support, it
becomes necessary to handle their migration. Various options exist to
transfer their state:
1) as the VM memory, RAM or devices (we could say that's how
vhost-user devices can be handled today, they are expected to
restore from ring state)
2) other "vmstate" (as with TPM emulator state blobs)
3) left to be handled by management layer
1) is not practical, since an external processes may legitimatelly
need arbitrary state date to back a device or a service, or may not
even have an associated device.
2) needs ad-hoc code for each helper, but is simple and working
3) is complicated for management layer, QEMU has the migration timing
The proposed "dbus-vmstate" object will connect to a given D-Bus
address, and save/load from org.qemu.VMState1 owners on migration.
Thus helpers can easily have their state migrated with QEMU, without
implementing ad-hoc support (such as done for TPM emulation)
D-Bus is ubiquitous on Linux (it is systemd IPC), and can be made to
work on various other OSes. There are several implementations and good
bindings for various languages. (the tests/dbus-vmstate-test.c is a
good example of how simple the implementation of services can be, even
in C)
dbus-vmstate is put into use by the libvirt series "[PATCH 00/23] Use
a slirp helper process".
v2:
- fix build with broken mingw-glib
-----BEGIN PGP SIGNATURE-----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=M4kD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/dbus-vmstate7-pull-request' into staging
Add dbus-vmstate
Hi,
With external processes or helpers participating to the VM support, it
becomes necessary to handle their migration. Various options exist to
transfer their state:
1) as the VM memory, RAM or devices (we could say that's how
vhost-user devices can be handled today, they are expected to
restore from ring state)
2) other "vmstate" (as with TPM emulator state blobs)
3) left to be handled by management layer
1) is not practical, since an external processes may legitimatelly
need arbitrary state date to back a device or a service, or may not
even have an associated device.
2) needs ad-hoc code for each helper, but is simple and working
3) is complicated for management layer, QEMU has the migration timing
The proposed "dbus-vmstate" object will connect to a given D-Bus
address, and save/load from org.qemu.VMState1 owners on migration.
Thus helpers can easily have their state migrated with QEMU, without
implementing ad-hoc support (such as done for TPM emulation)
D-Bus is ubiquitous on Linux (it is systemd IPC), and can be made to
work on various other OSes. There are several implementations and good
bindings for various languages. (the tests/dbus-vmstate-test.c is a
good example of how simple the implementation of services can be, even
in C)
dbus-vmstate is put into use by the libvirt series "[PATCH 00/23] Use
a slirp helper process".
v2:
- fix build with broken mingw-glib
# gpg: Signature made Mon 06 Jan 2020 14:43:35 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/dbus-vmstate7-pull-request:
tests: add dbus-vmstate-test
tests: add migration-helpers unit
dockerfiles: add dbus-daemon to some of latest distributions
configure: add GDBUS_CODEGEN
Add dbus-vmstate object
util: add dbus helper unit
docs: start a document to describe D-Bus usage
vmstate: replace DeviceState with VMStateIf
vmstate: add qom interface to get id
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Minor fixes and tests from the freeze period (too minor to be included
in 4.2)
- Allow many bash iotests to test qcow2's external data file feature
- Add compress filter driver
- Fix Python iotests after 6f6e1698a6
- Fix for the backup job
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl4TRSISHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AOiUIAJKWyzc+d7Fe4mwYamrNq5kf3dadw0qp
t4HGjQ5vn+u4I4FH7NwSlx7qpWcerqxijeOJUYPMzCAS2/cm6OG4ETcPzfM+TeZL
sJupvu1aloUnJiQxs424KD5AClHftByu+KpDOYmt8HmuSG+PkXvrz3q5bfJEjBQ3
ZVKp7Ye8XkSLMPFlOavJGiniEx9huzQ7d1PHxZjpq+GrowFN+vGBuRu2+GfYQSIl
+F1XbojSA7X91DDLgLbgZbTrwA4ph9qUJF1ObzhCToL2JcTt8H4Wleujaah2czi5
2tOt1xKGtXy0mSx8ToJSI9JYIy/R/cGp7J9RNWgWa9OvNftgCJ10mAs=
=EHAE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-01-06' into staging
Block patches:
- Minor fixes and tests from the freeze period (too minor to be included
in 4.2)
- Allow many bash iotests to test qcow2's external data file feature
- Add compress filter driver
- Fix Python iotests after 6f6e1698a6
- Fix for the backup job
# gpg: Signature made Mon 06 Jan 2020 14:33:06 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-01-06: (34 commits)
backup-top: Begin drain earlier
tests/qemu-iotests: Update tests to recent desugarized -accel option
tests/qemu-iotests: add case to write compressed data of multiple clusters
qcow2: Allow writing compressed data of multiple clusters
block: introduce compress filter driver
iotests: Allow check -o data_file
iotests: Disable data_file where it cannot be used
iotests: Make 198 work with data_file
iotests: Make 137 work with data_file
iotests: Make 110 work with data_file
iotests: Make 091 work with data_file
iotests: Avoid cp/mv of test images
iotests: Use _rm_test_img for deleting test images
iotests: Avoid qemu-img create
iotests: Drop IMGOPTS use in 267
iotests: Replace IMGOPTS='' by --no-opts
iotests: Replace IMGOPTS= by -o
iotests: Inject space into -ocompat=0.10 in 051
iotests: Add -o and --no-opts to _make_test_img
iotests: Let _make_test_img parse its parameters
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It tests proper seg_max_adjust settings for all machine types except
'none', 'isapc', 'microvm'
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20191220140905.1718-3-dplotnikov@virtuozzo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move a few helper functions from migration-test.c to migration-helpers.c
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add an interface to get the instance id, instead of depending on
Device and qdev_get_dev_path().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 6f6e1698a6 desugarized "-machine accel=" to a list
of "-accel" options. Since now "-machine accel" and "-accel"
became incompatible, update the iotests to the new format.
Error reported here:
https://gitlab.com/qemu-project/qemu/-/jobs/385801004#L3400
Reported-by: GitLab CI
Fixes: 6f6e1698a6 (vl: configure accelerators from -accel options)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200106130951.29873-1-philmd@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add the case to the iotest #214 that checks possibility of writing
compressed data of more than one cluster size. The test case involves
the compress filter driver showing a sample usage of that.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1575288906-551879-4-git-send-email-andrey.shinkevich@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The problem with allowing the data_file option is that you want to use a
different data file per image used in the test. Therefore, we need to
allow patterns like -o data_file='$TEST_IMG.data_file'.
Then, we need to filter it out from qemu-img map, qemu-img create, and
remove the data file in _rm_test_img.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-23-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191107163708.833192-22-mreitz@redhat.com
[mreitz: Also disable 273]
Signed-off-by: Max Reitz <mreitz@redhat.com>
We do not care about the json:{} filenames here, so we can just filter
them out and thus make the test work both with and without external data
files.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-21-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When using an external data file, there are no refcounts for data
clusters. We thus have to adjust the corruption test in this patch to
not be based around a data cluster allocation, but the L2 table
allocation (L2 tables are still refcounted with external data files).
Furthermore, we should not print qcow2.py's list of incompatible
features because it differs depending on whether there is an external
data file or not.
With those two changes, the test will work both with and without
external data files (once that options works with the iotests at all).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-20-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The only difference is that the json:{} filename of the image looks
different. We actually do not care about that filename in this test, we
are only interested in (1) that there is a json:{} filename, and (2)
whether the backing filename can be constructed.
So just filter out the json:{} data, thus making this test pass both
with and without data_file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-19-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The image end offset as reported by qemu-img check is different when
using an external data file; we do not care about its value here, so we
can just filter it. Incidentally, common.rc already has _check_test_img
for us which does exactly that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-18-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will not work with external data files, so try to get tests working
without it as far as possible.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-17-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Just rm will not delete external data files. Use _rm_test_img every
time we delete a test image.
(In the process, clean up the indentation of every _cleanup() this patch
touches.)
((Also, use quotes consistently. I am happy to see unquoted instances
like "rm -rf $TEST_DIR/..." go.))
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use _make_test_img whenever possible. This way, we will not ignore
user-specified image options.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-15-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Overwriting IMGOPTS means ignoring all user-supplied options, which is
not what we want. Replace the current IMGOPTS use by a new BACKING_FILE
variable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-14-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tests should not overwrite all user-supplied image options, but only add
to it (which will effectively overwrite conflicting values). Accomplish
this by passing options to _make_test_img via -o instead of $IMGOPTS.
For some tests, there is no functional change because they already only
appended options to IMGOPTS. For these, this patch is just a
simplification.
For others, this is a change, so they now heed user-specified $IMGOPTS.
Some of those tests do not work with all image options, though, so we
need to disable them accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It did not matter before, but now that _make_test_img understands -o, we
should use it properly here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Blindly overriding IMGOPTS is suboptimal as this discards user-specified
options. Whatever options the test needs should simply be appended.
Some tests do this (with IMGOPTS=$(_optstr_add "$IMGOPTS" "...")), but
that is cumbersome. It’s simpler to just give _make_test_img an -o
parameter with which tests can add options.
Some tests actually must override the user-specified options, though,
for example when creating an image in a different format than the test
$IMGFMT. For such cases, --no-opts allows clearing the current option
list.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will allow us to add more options than just -b.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
IMGOPTS can never be empty for qcow2, because the check scripts adds
compat=1.1 unless the user specified any compat option themselves.
Thus, this block does not do anything and can be dropped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some tests require compat=1.1 and thus set IMGOPTS='compat=1.1'
globally. That is not how it should be done; instead, they should
simply set _unsupported_imgopts to compat=0.10 (compat=1.1 is the
default anyway).
This makes the tests heed user-specified $IMGOPTS. Some do not work
with all image options, though, so we need to disable them accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsky@redhat.com>
Message-id: 20191107163708.833192-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test can run just fine with other values for refcount_bits, so we
should filter the value from qcow2.py's dump-header. In fact, we can
filter everything but the feature bits and header extensions, because
that is what the test is about.
(036 currently ignores user-specified image options, but that will be
fixed in the next patch.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Print the feature fields as a set of bits so that filtering is easier.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is useful for tests that want to whitelist fields from dump-header
(with grep) but still print all header extensions.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20191107163708.833192-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Probably due to blind copy-pasting, we have several instances of "qocw2"
in our iotests. Fix them.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191107163708.833192-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20191108123455.39445-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Callers can use this new parameter to expect failure during the
completion process.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191108123455.39445-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
ACPI table HMAT has been introduced, QEMU now builds HMAT tables for
Heterogeneous Memory with boot option '-numa node'.
Add test cases on PC and Q35 machines with 2 numa nodes.
Because HMAT is generated when system enable numa, the
following tables need to be added for this test:
tests/data/acpi/pc/APIC.acpihmat
tests/data/acpi/pc/SRAT.acpihmat
tests/data/acpi/pc/HMAT.acpihmat
tests/data/acpi/pc/DSDT.acpihmat
tests/data/acpi/q35/APIC.acpihmat
tests/data/acpi/q35/SRAT.acpihmat
tests/data/acpi/q35/HMAT.acpihmat
tests/data/acpi/q35/DSDT.acpihmat
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Daniel Black <daniel@linux.ibm.com>
Reviewed-by: Jingqi Liu <Jingqi.liu@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-9-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check configuring HMAT usecase
Acked-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-8-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
- qemu-img: fix info --backing-chain --image-opts
- Error out on image creation with conflicting size options
- Fix external snapshot with VM state
- hmp: Allow using qdev ID for qemu-io command
- Misc code cleanup
- Many iotests improvements
-----BEGIN PGP SIGNATURE-----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=laVP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qemu-img: fix info --backing-chain --image-opts
- Error out on image creation with conflicting size options
- Fix external snapshot with VM state
- hmp: Allow using qdev ID for qemu-io command
- Misc code cleanup
- Many iotests improvements
# gpg: Signature made Thu 19 Dec 2019 17:23:11 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (30 commits)
iotests: Test external snapshot with VM state
hmp: Allow using qdev ID for qemu-io command
block: Activate recursively even for already active nodes
iotests: 211: Remove duplication with VM.blockdev_create()
iotests: 207: Remove duplication with VM.blockdev_create()
iotests: 266: Convert to VM.blockdev_create()
iotests: 237: Convert to VM.blockdev_create()
iotests: 213: Convert to VM.blockdev_create()
iotests: 212: Convert to VM.blockdev_create()
iotests: 210: Convert to VM.blockdev_create()
iotests: 206: Convert to VM.blockdev_create()
iotests: 255: Drop blockdev_create()
iotests: Create VM.blockdev_create()
qcow2: Move error check of local_err near its assignment
iotests: Fix IMGOPTSSYNTAX for nbd
iotests/273: Filter format-specific information
iotests: Add more "_require_drivers" checks to the shell-based tests
MAINTAINERS: fix qcow2-bitmap.c under Dirty Bitmaps header
qcow2: Use offset_into_cluster()
iotests: Support job-complete in run_job()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Python 3.5 is the oldest Python version available on our
supported build platforms, and Python 2 end of life will be 3
weeks after the planned release date of QEMU 4.2.0. Drop Python
2 support from configure completely, and require Python 3.5 or
newer.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20191016224237.26180-1-ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
=OAkV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging
Various testing and logging updates
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
tests/tcg: ensure we re-configure if configure.sh is updated
trace: replace hand-crafted pattern_glob with g_pattern_match_simple
linux-user: convert target_munmap debug to a tracepoint
linux-user: log page table changes under -d page
linux-user: add target_mmap_complete tracepoint
linux-user: convert target_mmap debug to tracepoint
linux-user: convert target_mprotect debug to tracepoint
travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
docker: gtester is no longer used
Added tests for close and change of logfile.
Add use of RCU for qemu_logfile.
qemu_log_lock/unlock now preserves the qemu_logfile handle.
Add a mutex to guarantee single writer to qemu_logfile handle.
Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
Fix double free issue in qemu_set_log_filename().
ci: build out-of-tree
travis.yml: Enable builds on arm64, ppc64le and s390x
tests/test-util-filemonitor: Skip test on non-x86 Travis containers
tests/hd-geo-test: Skip test when images can not be created
iotests: Skip test 079 if it is not possible to create large files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This tests creating an external snapshot with VM state (which results in
an active overlay over an inactive backing file, which is also the root
node of an inactive BlockBackend), re-activating the images and
performing some operations to test that the re-activation worked as
intended.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The blockdev_create() function in this test case adds an error check
that skips the test in case of failure because of memory shortage, but
provides otherwise the same functionality as VM.blockdev_create() from
iotests.py. Make it a thin wrapper around the iotests.py function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The blockdev_create() function in this test case adds another filter to
the logging, but provides otherwise the same functionality as
VM.blockdev_create() from iotests.py. Make it a thin wrapper around the
iotests.py function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of having a separate blockdev_create() function, make use of the
VM.blockdev_create() offered by iotests.py.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of having a separate blockdev_create() function, make use of the
VM.blockdev_create() offered by iotests.py.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of having a separate blockdev_create() function, make use of the
VM.blockdev_create() offered by iotests.py.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of having a separate blockdev_create() function, make use of the
VM.blockdev_create() offered by iotests.py.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of having a separate blockdev_create() function, make use of the
VM.blockdev_create() offered by iotests.py.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of having a separate blockdev_create() function, make use of the
VM.blockdev_create() offered by iotests.py.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have several almost identical copies of a blockdev_create() function
in different test cases. Time to create one unified function in
iotests.py.
To keep the diff managable, this patch only creates the function and
follow-up patches will convert the individual test cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no $SOCKDIR, only $SOCK_DIR.
Fixes: f3923a72f1
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Doing this allows running this test with e.g. -o compat=0.10 or
-o compat=refcount_bits=1.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 051 should be skipped if nbd is not available, and 267 should
be skipped if copy-on-read is not enabled.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We were only doing this if docker was enabled which isn't quite right.
Fixes: fc76c56d3f
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191211170520.7747-17-alex.bennee@linaro.org>
We are using tap-driver.pl, do not require anymore gtester to be installed
to run the testsuite in docker-based tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1576632611-55032-1-git-send-email-pbonzini@redhat.com>
One test ensures that the logfile handle is still valid even if
the logfile is changed during logging.
The other test validates that the logfile handle remains valid under
the logfile lock even if the logfile is closed.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-7-robert.foley@linaro.org>
test-util-filemonitor fails in restricted non-x86 Travis containers
since they apparently blacklisted some required system calls there.
Let's simply skip the test if we detect such an environment.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191204154618.23560-6-thuth@redhat.com>
In certain environments like restricted containers, we can not create
huge test images. To be able to use "make check" in such container
environments, too, let's skip the hd-geo-test instead of failing when
the test images could not be created.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191204154618.23560-5-thuth@redhat.com>
Test 079 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. Test 079 tries to
create a 4G sparse file, which is apparently already too big for these
containers, so check first whether we can really create such files before
executing the test.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204154618.23560-4-thuth@redhat.com>
Test 060 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. The repair process
in test 060 creates a file of 64 GiB, so test first whether such large
files are possible and skip the test if that's not the case.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204154618.23560-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Some tests create huge (but sparse) files, and to be able to run those
tests in certain limited environments (like CI containers), we have to
check for the possibility to create such files first. Thus let's introduce
a common function to check for large files, and replace the already
existing checks in the iotests 005 and 220 with this function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204154618.23560-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
By default VM build test use qemu-img from system's PATH to
create the image disk. Due the lack of qemu-img on the system
or the desire to simply use a version built with QEMU, it would
be nice to allow one to set its path. So this patch makes that
possible by reading the path to qemu-img from QEMU_IMG if set,
otherwise it fallback to default behavior.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191114134246.12073-2-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Our docker infrastructure isn't quite as multiarch as we would wish so
lets allow the user to disable it if they want. This will allow us to
use still run check-tcg on non-x86 CI setups.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
There are currently two bugs in s390x_code[]: First, the initial jump
uses the wrong offset, so it was jumping to 0x10014 instead of 0x10010.
Second, LHI only loads the lower 32-bit of the register.
Everything worked fine as long as the s390-ccw bios code was jumping
here with r3 containing zeroes in the uppermost 48 bit - which just
happened to be the case so far by accident. But we can not rely on this
fact, and indeed one of the recent suggested patches to jump2ipl.c cause
the newer GCCs to put different values into r3. In that case the code
from s390x_code[] crashes very ungracefully.
Thus let's make sure to jump to the right instruction, and use LGHI
instead of LHI to make sure that we always zero out the upper bits
of the register.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191217150642.27946-1-thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
test_keyval_visit_size() should test for trailing crap after size with
and without suffix. It does test the latter: "sz2=16Gi" has size
"16G" followed by crap "i". It fails to test the former "sz1=16E" is
a syntactically valid size that overflows uint64_t. Replace by
"sz1=0Z".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191125133846.27790-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Automatically complete jobs that have a 'ready' state and need an
explicit job-complete. Without this, run_job() would hang for such
jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
run_job() accepts a wait parameter for a timeout, but it doesn't
actually use it. The only thing that is missing is passing it to
events_wait(), so do that now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a function that runs qemu-io and logs the output with the
appropriate filters applied.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The error message for a negative speed uses QERR_INVALID_PARAMETER,
which implies that the 'speed' option doesn't even exist:
{"error": {"class": "GenericError", "desc": "Invalid parameter 'speed'"}}
Make it use QERR_INVALID_PARAMETER_VALUE instead:
{"error": {"class": "GenericError", "desc": "Parameter 'speed' expects a non-negative value"}}
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If both the create options (qemu-img create -o ...) and the size
parameter were given, the size parameter was silently ignored. Instead,
make specifying two sizes an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Only apply --image-opts to the topmost image when listing an entire
backing chain. It is incorrect to treat backing filenames as image
options. Assuming we have the backing chain t.IMGFMT.base <-
t.IMGFMT.mid <- t.IMGFMT, qemu-img info fails as follows:
$ qemu-img info --backing-chain --image-opts \
driver=qcow2,file.driver=file,file.filename=t.IMGFMT
qemu-img: Could not open 'TEST_DIR/t.IMGFMT.mid': Cannot find device=TEST_DIR/t.IMGFMT.mid nor node_name=TEST_DIR/t.IMGFMT.mid
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 079 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. Test 079 tries to
create a 4G sparse file, which is apparently already too big for these
containers, so check first whether we can really create such files before
executing the test.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 060 fails in the arm64, s390x and ppc64le LXD containers on Travis
(which we will hopefully enable in our CI soon). These containers
apparently do not allow large files to be created. The repair process
in test 060 creates a file of 64 GiB, so test first whether such large
files are possible and skip the test if that's not the case.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some tests create huge (but sparse) files, and to be able to run those
tests in certain limited environments (like CI containers), we have to
check for the possibility to create such files first. Thus let's introduce
a common function to check for large files, and replace the already
existing checks in the iotests 005 and 220 with this function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191204093625.14836-19-armbru@redhat.com>
Local Error * variables are conventionally named @err or @local_err,
and Error ** parameters @errp. Naming local variables like parameters
is confusing. Clean that up.
Naming parameters like local variables is also confusing. Left for
another day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191204093625.14836-17-armbru@redhat.com>
Declaring a local Error *err without initializer looks suspicious.
Fuse the declaration with the initialization to avoid that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191204093625.14836-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
These machines can't be used reliably for migration anymore, quoting
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg04516.html :
"
due to the introduction of the memory API, the firmware is not
migrated correctly from source to destination. On QEMU <1.3 the
0xf0000-0xfffff area is basically a copy of the higher
0xffff0000-0xffffffff area, while on more recent versions it is
initialized with zeroes and the firmware copies from 0xffff0000 to
0xf0000. When you migrate from old to new QEMU, after reboot there's
nothing at 0xf0000 and bugs ensue.
"
The pc-0.x machines have been marked as deprecated since QEMU v4.0, so
it is time to remove them now.
And while we're at it, mark the remaining pc-1.x machine types
as deprecated now, too, so that we finally only have "pc-i440fx"
and "pc-q35" machine types left (apart from the non-versioned
"isapc" and "microvm") once we remove them in a couple of releases.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191209125248.5849-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The block tests, as well as ahci-test needs qemu-img. Do not run
them if it wasn't built.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "accel" property from MachineState, and instead desugar
"-machine accel=" to a list of "-accel" options.
This has a semantic change due to removing merge_lists from -accel.
For example:
- "-accel kvm -accel tcg" all but ignored "-accel kvm". This is a bugfix.
- "-accel kvm -accel thread=single" ignored "thread=single", since it
applied the option to KVM. Now it fails due to not specifying the
accelerator on "-accel thread=single".
- "-accel tcg -accel thread=single" chose single-threaded TCG, while now
it will fail due to not specifying the accelerator on "-accel
thread=single".
Also, "-machine accel" and "-accel" become incompatible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It has two bools and two strings, it is very difficult to remember
which does what. And it makes very difficult to add new parameters as
we need to modify all the callers.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390x
Tested-by: Laurent Vivier <lvivier@redhat.com>
This explains better what they do and avoid confussino with
command_src/target.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390x
Tested-by: Laurent Vivier <lvivier@redhat.com>
We are repeating almost everything for each machine while creating the
command line for migration. And once for source and another for
destination. We start putting there opts_src and opts_dst.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390x
Tested-by: Laurent Vivier <lvivier@redhat.com>
-----BEGIN PGP SIGNATURE-----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=4LJa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python queue 2019-12-17
# gpg: Signature made Tue 17 Dec 2019 05:12:43 GMT
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
python/qemu: Remove unneeded imports in __init__
python/qemu: accel: Add tcg_available() method
python/qemu: accel: Strengthen kvm_available() checks
python/qemu: accel: Add list_accel() method
python/qemu: Move kvm_available() to its own module
Acceptance tests: use relative location for tests
Acceptance tests: use avocado tags for machine type
Acceptance tests: introduce utility method for tags unique vals
Acceptance test x86_cpu_model_versions: use default vm
tests/acceptance: Makes linux_initrd and empty_cpu_model use QEMUMachine
python/qemu: Add set_qmp_monitor() to QEMUMachine
analyze-migration.py: replace numpy with python 3.2
analyze-migration.py: fix find() type error
Revert "Acceptance test: cancel test if m68k kernel packages goes missing"
tests/boot_linux_console: Fetch assets from Debian snapshot archives
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
g_test_rand_int provides a reproducible random integer number, using a
different number seed every time but allowing reproduction using the
--seed command line option. It is thus better suited to tests than
g_random_int or random.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1576113478-42926-1-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The check-report.html and check-report.xml targets were replaced
with check-report.tap in commit 9df43317b8 but the check-help
text was not updated so it still lists check-report.html.
Fixes: 9df43317b8
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191211204427.4681-2-wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We have a setenv() wrapper in os-win32.c that no one is actually using.
Drop it and change to g_setenv() uniformly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1576074210-52834-7-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On ppc64, migration-test only works with kvm_hv, and we already
have a check to verify the module is loaded.
kvm_hv module can be loaded in memory and /sys/module/kvm_hv exists,
but on some systems (like build systems) /dev/kvm can be missing
(by administrators choice).
And as kvm_hv exists test-migration is started but QEMU falls back to
TCG because it cannot be used:
Could not access KVM kernel module: No such file or directory
failed to initialize KVM: No such file or directory
Back to tcg accelerator
And as the test is done with TCG, it fails.
As for s390x, we must check for the existence and the access rights
of /dev/kvm.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20191120170955.242900-1-lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
./configure --enable-sdl --audio-drv-list=sdl --enable-modules
Will generate two identical test names: /$arch/module/load/sdl
Which generates an error like:
(tests/modules-test:23814): GLib-ERROR **: 18:23:06.359: duplicate test case path: /aarch64//module/load/sdl
Add the subsystem prefix in the name as well, so instead we get:
/$arch/module/load/audio-sdl
/$arch/module/load/ui-sdl
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <d64c9aa098cc6e5c0b638438c4959eddfa7e24e2.1573679311.git.crobinso@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the bluetooth code has been removed, we don't need to test
with this library anymore.
Message-Id: <20191120091014.16883-5-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This creates the 'accel' Python module to be the home for
utilities that deal with accelerators. Also moved kvm_available()
from __init__.py to this new module.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191216191438.93418-2-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
An Avocado Test ID[1] is composed by a number of components, but it
starts with the Test Name, usually a file system location that was
given to the loader.
Because the source directory is being given as a prefix to the
"tests/acceptance" directory containing the acceptance tests, the test
names will needlessly include the directory the user is using to host
the QEMU sources (and/or build tree).
Let's remove the source dir (or a build dir) from the path given to
the test loader. This should give more constant names, and when using
result servers and databases, it should give the same test names
across executions from different people or from different directories.
[1] - https://avocado-framework.readthedocs.io/en/69.0/ReferenceGuide.html#test-id
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191104151323.9883-5-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The same way the arch tag is being used as a fallback for the arch
parameter, let's do the same for QEMU's machine and avoid some boiler
plate code.
This is now possible because, since Avocado 72.0, it's possible to use
tags with names that match the machine types on QEMU.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191104151323.9883-4-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Currently a test can describe the target architecture binary that it
should primarily be run with, be setting a single tag value.
The same approach is expected to be done with other QEMU aspects to be
tested, for instance, the machine type and accelerator, so let's
generalize the logic into a utility method.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190924194501.9303-3-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The default vm provided by the test, available as self.vm, serves the
same purpose of the one obtained by self.get_vm(), but saves a line
and matches the style of other tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190924194501.9303-2-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
On linux_initrd and empty_cpu_model tests the same effect of
calling QEMU through run() to inspect the terminated process is
achieved with a sequence of set_qmp_monitor() / launch() / wait()
commands on an QEMUMachine object. This patch changes those
tests to use QEMUMachine instead, so they follow the same pattern
to launch QEMU found on other acceptance tests.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191211185536.16962-3-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Now than we use the stable snapshot archive, we can remove this check.
This reverts commit d2499aca4b.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191126223810.20180-3-philmd@redhat.com>
Tested-by: Willian Rampazzo <wrampazz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The kernel packaged was fetched from an unstable repository.
Use the stable snapshot archive instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191126223810.20180-2-philmd@redhat.com>
Tested-by: Willian Rampazzo <wrampazz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The script checkpatch.pl located in scripts folder was
used to detect all errors and warrnings in files:
hw/mips/mips_malta.c
hw/mips/gt64xxx_pci.c
tests/acceptance/linux_ssh_mips_malta.py
All these mips malta machine files were edited and
all the errors and warrings generated by the checkpatch.pl
script were corrected and then the script was
ran again to make sure there are no more errors and warnings.
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1575640687-20744-3-git-send-email-Filip.Bozuta@rt-rk.com>
After the introduction of generic PCIe root port and PCIe-PCI bridge,
we will also have SHPC controller on ARM, so just enable SHPC native
hot plug.
Also update tests/data/acpi/virt/DSDT* to pass "make check".
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-id: 20191209063719.23086-3-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The last argument of AML bit and/or statement is the target variable,
so we don't need to use a NULL target and then an additional store
operation; using just aml_and() or aml_or() statement is enough.
Also update tests/data/acpi/virt/DSDT* to pass "make check".
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-id: 20191209063719.23086-2-guoheyi@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Libcap was dropped from virtio-9p (commit 7e46261368), so remove it from
the dockerfiles as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
[groug, mention SHA1 that dropped libcap]
Signed-off-by: Greg Kurz <groug@kaod.org>
Add optional pre-shutdown: shutdown/launch vm before migration. This
leads to storing persistent bitmap to the storage, which breaks
migration with dirty-bitmaps capability enabled and shared storage
until fixed by previous commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191125125229.13531-3-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The current image is broken while running qtests but the bug go away
when built with a newer Ubuntu i386 image. I was unable to replicate
the crash on Debian Buster for i386 either so I'm concluding it is a
distro problem. Let's paper over that crack by updating our 32 bir
test image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The iotests in particular don't like the output being spammed with
warnings about locales.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
To be able to run the docker tests centos has here we have to install
python3 as well as the basic tools.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Commit 29cb418749 ("spapr: Set VSMT to smp_threads by default")
has introduced a new default value for VSMT that is not supported
by old kernels (before 4.13 kernel) and this breaks "make check"
on these kernels.
To fix that, explicitly set in the involved tests the value that was
used as the default value before the change.
Cc: Greg Kurz <groug@kaod.org>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20191120142539.236279-1-lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- tweak DEBUG behaviour for vm-test-build
- rename and update plug docs for versioning
- slim down MAIN_SOFTMMU_TARGETS
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl3VG9cACgkQ+9DbCVqe
KkQvaAgAgfum+j9VZrgAakBKzmBuWV5IH5vJ+w9rzCP9/Y8XtQ7wd1le4jY0XtEb
6azCR0Fk4QivuXaH+YA3M6iV3Om5m5Tl6dIYsDt0Qk6jCkZE/Kfi/7jEQaPnVH0V
FQzSvXOtbMipBNBYp/WzMqNAdbIB3hI/oBXcxFqNiKrTsLylywSKCJCbHrJDNtCh
q0hHvqPVrCTXCSav16NqbxqibRn+gSkYFeAAE2LjaX9yVpa2bGMmjvQEJCeEBMxQ
76KzcLyKHhvl9NJWjd7UYaVLyXgGnOLtp3KjFaSM4+BU8CS/nY6h7Oiymyf8vShV
Bmx/Ju/m0J/H8RHfRdZcE0YGYuEmKA==
=EMcr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-rc3-testing-and-tcg-201119-1' into staging
A few test and doc fixes:
- tweak DEBUG behaviour for vm-test-build
- rename and update plug docs for versioning
- slim down MAIN_SOFTMMU_TARGETS
# gpg: Signature made Wed 20 Nov 2019 10:56:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-rc3-testing-and-tcg-201119-1:
tests/tcg: modify multiarch tests to work with clang
.travis.yml: drop 32 bit systems from MAIN_SOFTMMU_TARGETS
docs/devel: update tcg-plugins.rst with API versioning details
docs/devel: rename plugins.rst to tcg-plugins.rst
tests/vm: make --interactive (and therefore DEBUG=1) unconditional
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the concept of only dropping to ssh if a test fails is nice it
is more useful for this to be unconditional. You usually just want to
get the build up and running and then noodle around debugging or
attempting to replicate.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Vladimir Sementsov-Ogievskiy
Thomas Huth
John Snow
Eric Blake
Alex Bennée
Heyi Guo
Pan Nengyuan
Dr. David Alan Gilbert
Miroslav Rezanina
Greg Kurz
Aarushi Mehta
Andrew Jones
Damien Hedde
Peter Maydell
Juan Quintela
Alexander Popov
Sven Schnelle
Sergio Lopez
Max Reitz
Marc-André Lureau
Richard Henderson
Corey Minyard
Michael S. Tsirkin
Igor Mammedov
Eric Auger
Philippe Mathieu-Daudé
Laurent Vivier
Shameer Kolothum
Markus Armbruster
Gerd Hoffmann
Philippe Mathieu-Daudé
Denis Plotnikov
Andrey Shinkevich
Tao Xu
Eduardo Habkost
Kevin Wolf
Paolo Bonzini
Robert Foley
Wainer dos Santos Moschetta
Stefan Hajnoczi
Cole Robinson
Cleber Rosa
Filip Bozuta
Taylor Simpson