HVFX86EmulatorState carries it's own copy of x86 flags. It can be
dropped in favor of eflags in generic CPUX86State.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-9-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The field is used to print address of instructions that have no parser
in decode_invalid(). RIP from VMCS is saved into fetch_rip before
decoding starts but it's also saved into env->eip in load_regs().
Therefore env->eip can be used instead of fetch_rip.
While at it, correct address printed in decode_invalid(). It prints an
address before the unknown instruction.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-8-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop and replace rip field from HVFX86EmulatorState in favor of eip from
common CPUX86State.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-7-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There's no need to read VMCS twice, instruction length is already
available in ins_len.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-6-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-5-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
They have no use.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20200528193758.51454-4-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
They're either declared elsewhere or have no use.
While at it, rename _hvf_cpu_synchronize_post_init() to
do_hvf_cpu_synchronize_post_init().
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-3-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
"sysemu/hvf.h" is intended for inclusion in generic code. However it
also contains several hvf definitions and declarations, including
HVFState that are used only inside "hvf.c". "hvf-i386.h" would be more
appropriate place to define HVFState as it's only included by "hvf.c"
and "x86_task.c".
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-2-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code related to PPC Virtual Hypervisor is pointless in user-mode.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200526172427.17460-5-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When HVF is not available, the hvf_allowed variable does not exist.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200526172427.17460-4-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When TCG is not available, the tcg_allowed variable does not exist.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200526172427.17460-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restrict init_machine(), setup_post() and has_memory()
to system-mode.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200526172427.17460-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This corrects a bug introduced in my previous fix for SSE4.2 pcmpestri
/ pcmpestrm / pcmpistri / pcmpistrm substring search, commit
ae35eea7e4.
That commit fixed a bug that showed up in four GCC tests with one libc
implementation. The tests in question generate random inputs to the
intrinsics and compare results to a C implementation, but they only
test 1024 possible random inputs, and when the tests use the cases of
those instructions that work with word rather than byte inputs, it's
easy to have problematic cases that show up much less frequently than
that. Thus, testing with a different libc implementation, and so a
different random number generator, showed up a problem with the
previous patch.
When investigating the previous test failures, I found the description
of these instructions in the Intel manuals (starting from computing a
16x16 or 8x8 set of comparison results) confusing and hard to match up
with the more optimized implementation in QEMU, and referred to AMD
manuals which described the instructions in a different way. Those
AMD descriptions are very explicit that the whole of the string being
searched for must be found in the other operand, not running off the
end of that operand; they say "If the prototype and the SUT are equal
in length, the two strings must be identical for the comparison to be
TRUE.". However, that statement is incorrect.
In my previous commit message, I noted:
The operation in this case is a search for a string (argument d to
the helper) in another string (argument s to the helper); if a copy
of d at a particular position would run off the end of s, the
resulting output bit should be 0 whether or not the strings match in
the region where they overlap, but the QEMU implementation was
wrongly comparing only up to the point where s ends and counting it
as a match if an initial segment of d matched a terminal segment of
s. Here, "run off the end of s" means that some byte of d would
overlap some byte outside of s; thus, if d has zero length, it is
considered to match everywhere, including after the end of s.
The description "some byte of d would overlap some byte outside of s"
is accurate only when understood to refer to overlapping some byte
*within the 16-byte operand* but at or after the zero terminator; it
is valid to run over the end of s if the end of s is the end of the
16-byte operand. So the fix in the previous patch for the case of d
being empty was correct, but the other part of that patch was not
correct (as it never allowed partial matches even at the end of the
16-byte operand). Nor was the code before the previous patch correct
for the case of d nonempty, as it would always have allowed partial
matches at the end of s.
Fix with a partial revert of my previous change, combined with
inserting a check for the special case of s having maximum length to
determine where it is necessary to check for matches.
In the added test, test 1 is for the case of empty strings, which
failed before my 2017 patch, test 2 is for the bug introduced by my
2017 patch and test 3 deals with the case where a match of an initial
segment at the end of the string is not valid when the string ends
before the end of the 16-byte operand (that is, the case that would be
broken by a simple revert of the non-empty-string part of my 2017
patch).
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2006121344290.9881@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most x87 instruction implementations fail to raise the expected IEEE
floating-point exceptions because they do nothing to convert the
exception state from the softfloat machinery into the exception flags
in the x87 status word. There is special-case handling of division to
raise the divide-by-zero exception, but that handling is itself buggy:
it raises the exception in inappropriate cases (inf / 0 and nan / 0,
which should not raise any exceptions, and 0 / 0, which should raise
"invalid" instead).
Fix this by converting the floating-point exceptions raised during an
operation by the softfloat machinery into exceptions in the x87 status
word (passing through the existing fpu_set_exception function for
handling related to trapping exceptions). There are special cases
where some functions convert to integer internally but exceptions from
that conversion are not always correct exceptions for the instruction
to raise.
There might be scope for some simplification if the softfloat
exception state either could always be assumed to be in sync with the
state in the status word, or could always be ignored at the start of
each instruction and just set to 0 then; I haven't looked into that in
detail, and it might run into interactions with the various ways the
emulation does not yet handle trapping exceptions properly. I think
the approach taken here, of saving the softfloat state, setting
exceptions there to 0 and then merging the old exceptions back in
after carrying out the operation, is conservatively safe.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005152120280.3469@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When mapping physical memory into host's virtual address space,
'address_space_map' may return NULL if BounceBuffer is in_use.
Set and return '*plen = 0' to avoid later NULL pointer dereference.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: https://bugs.launchpad.net/qemu/+bug/1878259
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <20200526111743.428367-1-ppandit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Not checking the value of malloc will cause a warning with GCC 10.1,
which may result in configuration failure, with the following line in
config.log:
config-temp/qemu-conf.c:2:18: error: ignoring return value of ‘malloc’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
2 | int main(void) { malloc(1); return 0; }
| ^~~~~~~~~
Signed-off-by: Leonid Bloch <lb.workbox@gmail.com>
Message-Id: <20200524221204.9791-1-lb.workbox@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After upgrading to Ubuntu 20.04 LTS, GCC 9.3 complains:
util/qemu-thread-posix.c: In function ‘qemu_thread_exit’:
util/qemu-thread-posix.c:577:6: error: function might be candidate for attribute ‘noreturn’ [-Werror=suggest-attribute=noreturn]
577 | void qemu_thread_exit(void *retval)
| ^~~~~~~~~~~~~~~~
Fix by marking the qemu_thread_exit function with QEMU_NORETURN
to set the 'noreturn' attribute.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
getpid is good enough in a mono thread context, however thr_self/_lwp_self
reflects the real current thread identifier from a given process.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Carlier <devnexen@gmail.com>
The Perfmon and Debug Capability MSR named IA32_PERF_CAPABILITIES is
a feature-enumerating MSR, which only enumerates the feature full-width
write (via bit 13) by now which indicates the processor supports IA32_A_PMCx
interface for updating bits 32 and above of IA32_PMCx.
The existence of MSR IA32_PERF_CAPABILITIES is enumerated by CPUID.1:ECX[15].
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20200529074347.124619-5-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit acb9f95a removed boundary checks for ID and VCPU ID. After that,
the max definitions of that boundaries are not required anymore. This
commit is only a code cleanup.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Message-Id: <20200323200538.202164-1-jcfaracco@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In record/replay icount mode main loop thread and vCPU thread
do not perform simultaneously. They take replay mutex to synchronize
the actions. Sometimes vCPU thread waits for locking the mutex for
very long time, because main loop releases the mutex and takes it
back again. Standard qemu mutex do not provide the ordering
capabilities.
This patch adds a "queue" for replay mutex. Therefore thread ordering
becomes more "fair". Threads are executed in the same order as
they are trying to take the mutex.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <158823802979.28101.9340462887738957616.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many reserved bits of amd_iommu commands are defined incorrectly in QEMU.
Because of it, QEMU incorrectly injects lots of illegal commands into guest
VM's IOMMU event log.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Message-Id: <20200418042845.596457-1-wei.huang2@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable MicroBlaze testing.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200416193303.23674-2-edgar.iglesias@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In tcp_chr_sync_read function, there is a possibility of socket
disconnection during blocking read, then tcp_chr_hup function would clean up
the qio channel pointers(i.e ioc, sioc).
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-Id: <1587289900-29485-1-git-send-email-sai.pavan.boddu@xilinx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is majorly only for X86 because that's the only one that supports
split irqchip for now.
When the irqchip is split, we face a dilemma that KVM irqfd will be
enabled, however the slow irqchip is still running in the userspace.
It means that the resamplefd in the kernel irqfds won't take any
effect and it will miss to ack INTx interrupts on EOIs.
One example is split irqchip with VFIO INTx, which will break if we
use the VFIO INTx fast path.
This patch can potentially supports the VFIO fast path again for INTx,
that the IRQ delivery will still use the fast path, while we don't
need to trap MMIOs in QEMU for the device to emulate the EIOs (see the
callers of vfio_eoi() hook). However the EOI of the INTx will still
need to be done from the userspace by caching all the resamplefds in
QEMU and kick properly for IOAPIC EOI broadcast.
This is tricky because in this case the userspace ioapic irr &
remote-irr will be bypassed. However such a change will greatly boost
performance for assigned devices using INTx irqs (TCP_RR boosts 46%
after this patch applied).
When the userspace is responsible for the resamplefd kickup, don't
register it on the kvm_irqfd anymore, because on newer kernels (after
commit 654f1f13ea56, 5.2+) the KVM_IRQFD will fail if with both split
irqchip and resamplefd. This will make sure that the fast path will
work for all supported kernels.
https://patchwork.kernel.org/patch/10738541/#22609933
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200318145204.74483-5-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So that kvm_irqchip_assign_irqfd() can have access to the
EventNotifiers, especially the resample event. It is needed in follow
up patch to cache and kick resamplefds from QEMU.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200318145204.74483-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VFIO is currently the only one left that is not using the generic
function (kvm_irqchip_add_irqfd_notifier_gsi()) to register irqfds.
Let VFIO use the common framework too.
Follow up patches will introduce extra features for kvm irqfd, so that
VFIO can easily leverage that after the switch.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200318145204.74483-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AVX512_VP2INTERSECT compute vector pair intersection to a pair
of mask registers, which is introduced with intel Tiger Lake,
defining as CPUID.(EAX=7,ECX=0):EDX[bit 08].
Refer to the following release spec:
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Message-Id: <1586760758-13638-1-git-send-email-cathy.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Trying libFuzzer on the vmport device, we get:
AddressSanitizer:DEADLYSIGNAL
=================================================================
==29476==ERROR: AddressSanitizer: SEGV on unknown address 0x000000008840 (pc 0x56448bec4d79 bp 0x7ffeec9741b0 sp 0x7ffeec9740e0 T0)
==29476==The signal is caused by a READ memory access.
#0 0x56448bec4d78 in vmport_ioport_read (qemu-fuzz-i386+0x1260d78)
#1 0x56448bb5f175 in memory_region_read_accessor (qemu-fuzz-i386+0xefb175)
#2 0x56448bb30c13 in access_with_adjusted_size (qemu-fuzz-i386+0xeccc13)
#3 0x56448bb2ea27 in memory_region_dispatch_read1 (qemu-fuzz-i386+0xecaa27)
#4 0x56448bb2e443 in memory_region_dispatch_read (qemu-fuzz-i386+0xeca443)
#5 0x56448b961ab1 in flatview_read_continue (qemu-fuzz-i386+0xcfdab1)
#6 0x56448b96336d in flatview_read (qemu-fuzz-i386+0xcff36d)
#7 0x56448b962ec4 in address_space_read_full (qemu-fuzz-i386+0xcfeec4)
This is easily reproducible using:
$ echo inb 0x5658 | qemu-system-i386 -M isapc,accel=qtest -qtest stdio
[I 1589796572.009763] OPENED
[R +0.008069] inb 0x5658
Segmentation fault (core dumped)
$ coredumpctl gdb -q
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00005605b54d0f21 in vmport_ioport_read (opaque=0x5605b7531ce0, addr=0, size=4) at hw/i386/vmport.c:77
77 eax = env->regs[R_EAX];
(gdb) p cpu
$1 = (X86CPU *) 0x0
(gdb) bt
#0 0x00005605b54d0f21 in vmport_ioport_read (opaque=0x5605b7531ce0, addr=0, size=4) at hw/i386/vmport.c:77
#1 0x00005605b53db114 in memory_region_read_accessor (mr=0x5605b7531d80, addr=0, value=0x7ffc9d261a30, size=4, shift=0, mask=4294967295, attrs=...) at memory.c:434
#2 0x00005605b53db5d4 in access_with_adjusted_size (addr=0, value=0x7ffc9d261a30, size=1, access_size_min=4, access_size_max=4, access_fn=
0x5605b53db0d2 <memory_region_read_accessor>, mr=0x5605b7531d80, attrs=...) at memory.c:544
#3 0x00005605b53de156 in memory_region_dispatch_read1 (mr=0x5605b7531d80, addr=0, pval=0x7ffc9d261a30, size=1, attrs=...) at memory.c:1396
#4 0x00005605b53de228 in memory_region_dispatch_read (mr=0x5605b7531d80, addr=0, pval=0x7ffc9d261a30, op=MO_8, attrs=...) at memory.c:1424
#5 0x00005605b537c80a in flatview_read_continue (fv=0x5605b7650290, addr=22104, attrs=..., ptr=0x7ffc9d261b4b, len=1, addr1=0, l=1, mr=0x5605b7531d80) at exec.c:3200
#6 0x00005605b537c95d in flatview_read (fv=0x5605b7650290, addr=22104, attrs=..., buf=0x7ffc9d261b4b, len=1) at exec.c:3239
#7 0x00005605b537c9e6 in address_space_read_full (as=0x5605b5f74ac0 <address_space_io>, addr=22104, attrs=..., buf=0x7ffc9d261b4b, len=1) at exec.c:3252
#8 0x00005605b53d5a5d in address_space_read (len=1, buf=0x7ffc9d261b4b, attrs=..., addr=22104, as=0x5605b5f74ac0 <address_space_io>) at include/exec/memory.h:2401
#9 0x00005605b53d5a5d in cpu_inb (addr=22104) at ioport.c:88
X86CPU is NULL because QTest accelerator does not use CPU.
Fix by returning default values when QTest accelerator is used.
Reported-by: Clang AddressSanitizer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fist / fistt family of instructions should all store the most
negative integer in the destination format when the rounded /
truncated integer result is out of range or the input is an invalid
encoding, infinity or NaN. The fisttpl and fisttpll implementations
(32-bit and 64-bit results, truncate towards zero) failed to do this,
producing the most positive integer in some cases instead. Fix this
by copying the code used to handle this issue for fistpl and fistpll,
adjusted to use the _round_to_zero functions for the actual
conversion (but without any other changes to that code).
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005152119160.3469@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fbstp implementation fails to check for out-of-range and invalid
values, instead just taking the result of conversion to int64_t and
storing its sign and low 18 decimal digits. Fix this by checking for
an out-of-range result (invalid conversions always result in INT64_MAX
or INT64_MIN from the softfloat code, which are large enough to be
considered as out-of-range by this code) and storing the packed BCD
indefinite encoding in that case.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132351110.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fbstp implementation stores +0 when the rounded result should be
-0 because it compares an integer value with 0 to determine the sign.
Fix this by checking the sign bit of the operand instead.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132350230.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fxam implementation does not check for invalid encodings, instead
treating them like NaN or normal numbers depending on the exponent.
Fix it to check that the high bit of the significand is set before
treating an encoding as NaN or normal, thus resulting in correct
handling (all of C0, C2 and C3 cleared) for invalid encodings.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132349311.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementations of the fldl2t, fldl2e, fldpi, fldlg2 and fldln2
instructions load fixed constants independent of the rounding mode.
Fix them to load a value correctly rounded for the current rounding
mode (but always rounded to 64-bit precision independent of the
precision control, and without setting "inexact") as specified.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2005132348310.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not ignore the MemTxResult error type returned by
address_space_write().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both cpu_memory_rw_debug() and address_space_read() return
an error on failed transaction. Check the returned value,
and return EIO in case of error.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not ignore the MemTxResult error type returned by
the address_space_rw() API.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both address_space_read_cached_slow() and
address_space_write_cached_slow() return a MemTxResult type.
Do not discard it, return it to the caller.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation uses floatx80_scalbn for the final scaling
operation. floatx80_scalbn ends up rounding the result using the
dynamic rounding precision configured for the FPU. But only a limited
set of x87 floating-point instructions are supposed to respect the
dynamic rounding precision, and fscale is not in that set. Fix the
implementation to save and restore the rounding precision around the
call to floatx80_scalbn.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045430.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation passes infinite exponents through to generic
code that rounds the exponent to a 32-bit integer before using
floatx80_scalbn. In round-to-nearest mode, and ignoring exceptions,
this works in many cases. But it fails to handle the special cases of
scaling 0 by a +Inf exponent or an infinity by a -Inf exponent, which
should produce a NaN, and because it produces an inexact result for
finite nonzero numbers being scaled, the result is sometimes incorrect
in other rounding modes. Add appropriate handling of infinite
exponents to produce a NaN or an appropriately signed exact zero or
infinity as a result.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045010.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation does not check for invalid encodings in the
exponent operand, thus treating them like INT_MIN (the value returned
for invalid encodings by floatx80_to_int32_round_to_zero). Fix it to
treat them similarly to signaling NaN exponents, thus generating a
quiet NaN result.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070044190.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the fscale instruction returns a NaN exponent
unchanged. Fix it to return a quiet NaN when the provided exponent is
a signaling NaN.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070043330.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the fxtract instruction treats all nonzero
operands as normal numbers, so yielding incorrect results for invalid
formats, infinities, NaNs and subnormal and pseudo-denormal operands.
Implement appropriate handling of all those cases.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <alpine.DEB.2.21.2005070042360.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use unsigned type for the MegasasState fields which hold positive
numeric values.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20200513192540.1583887-4-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While in megasas_handle_frame(), megasas_enqueue_frame() may
set a NULL frame into MegasasCmd object for a given 'frame_addr'
address. Add check to avoid a NULL pointer dereference issue.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: https://bugs.launchpad.net/qemu/+bug/1878259
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20200513192540.1583887-3-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A guest user may set 'reply_queue_head' field of MegasasState to
a negative value. Later in 'megasas_lookup_frame' it is used to
index into s->frames[] array. Use unsigned type to avoid OOB
access issue.
Also check that 'index' value stays within s->frames[] bounds
through the while() loop in 'megasas_lookup_frame' to avoid OOB
access.
Reported-by: Ren Ding <rding@gatech.edu>
Reported-by: Hanqing Zhao <hanqing@gatech.edu>
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200513192540.1583887-2-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we hotplug vcpus, cpu_update_state is added to vm_change_state_head
in kvm_arch_init_vcpu(). But it forgot to delete in kvm_arch_destroy_vcpu() after
unplug. Then it will cause a use-after-free access. This patch delete it in
kvm_arch_destroy_vcpu() to fix that.
Reproducer:
virsh setvcpus vm1 4 --live
virsh setvcpus vm1 2 --live
virsh suspend vm1
virsh resume vm1
The UAF stack:
==qemu-system-x86_64==28233==ERROR: AddressSanitizer: heap-use-after-free on address 0x62e00002e798 at pc 0x5573c6917d9e bp 0x7fff07139e50 sp 0x7fff07139e40
WRITE of size 1 at 0x62e00002e798 thread T0
#0 0x5573c6917d9d in cpu_update_state /mnt/sdb/qemu/target/i386/kvm.c:742
#1 0x5573c699121a in vm_state_notify /mnt/sdb/qemu/vl.c:1290
#2 0x5573c636287e in vm_prepare_start /mnt/sdb/qemu/cpus.c:2144
#3 0x5573c6362927 in vm_start /mnt/sdb/qemu/cpus.c:2150
#4 0x5573c71e8304 in qmp_cont /mnt/sdb/qemu/monitor/qmp-cmds.c:173
#5 0x5573c727cb1e in qmp_marshal_cont qapi/qapi-commands-misc.c:835
#6 0x5573c7694c7a in do_qmp_dispatch /mnt/sdb/qemu/qapi/qmp-dispatch.c:132
#7 0x5573c7694c7a in qmp_dispatch /mnt/sdb/qemu/qapi/qmp-dispatch.c:175
#8 0x5573c71d9110 in monitor_qmp_dispatch /mnt/sdb/qemu/monitor/qmp.c:145
#9 0x5573c71dad4f in monitor_qmp_bh_dispatcher /mnt/sdb/qemu/monitor/qmp.c:234
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200513132630.13412-1-pannengyuan@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dynamic allocating vcpu state structure according to smp value to be
more precise and safe. Previously it will alloccate array of fixed size
HAX_MAX_VCPU.
This is achieved by using g_new0 to dynamic allocate the array. The
allocated size is obtained from smp.max_cpus in MachineState. Also, the
size is compared with HAX_MAX_VCPU when creating the vm. The reason for
choosing dynamic array over linked list is because the status is visited
by index all the time.
This will lead to QEMU checking whether the smp value is larger than the
HAX_MAX_VCPU when creating vm, if larger, the process will terminate,
otherwise it will allocate array of size smp to store the status.
V2: Check max_cpus before open vm. (Philippe)
Signed-off-by: WangBowen <bowen.wang@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Message-Id: <20200509035952.187615-1-colin.xu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before recent commit abc9bf69a6, configure_icount() returned early
when option "shift" was absent: succeed when option "align" was also
absent, else fail.
Since then, it still errors out when only "align" is present, but
continues when both are absent. Crashes when examining the value of
"shift" further. Reproducer: -icount "".
Revert this erroneous part of the commit.
Fixes: abc9bf69a6
Fixes: Coverity CID 1428754
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200515042231.18201-1-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
