Move rtc-reset-reinjection and SEV in target.json and make them
conditional on TARGET_I386.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190214152251.2073-10-armbru@redhat.com>
We can't add appropriate target-specific conditionals to misc.json,
because that would make all of misc.json unusable in
target-independent code. To keep misc.json target-independent, we
need to split off target-dependent target.json.
This commit doesn't actually split off anything, it merely creates the
empty module. The next few patches will move stuff from misc.json
there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-9-armbru@redhat.com>
Adding QAPI's .o to util-obj-y, common-obj-y and obj-y is spread over
three places: Makefile.objs takes care of target-independent generated
code, Makefile.target of target-dependent generated code, and
qapi/Makefile.objs of (target-independent) hand-written code.
Do everything in qapi/Makefile.objs.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-8-armbru@redhat.com>
The following patches are going to introduce per-target #ifdef in the
schemas.
The introspection data is statically generated once, and must thus be
built per-target to reflect target-specific configuration.
Drop "do_test_visitor_in_qmp_introspect(&qmp_schema_qlit)" since the
schema is no longer in a common object. It is covered by the per-target
query-qmp-schema test instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190214152251.2073-7-armbru@redhat.com>
Having to include qapi-events.h just for QAPIEvent is suboptimal, but
quite tolerable now. It'll become problematic when we have events
conditional on the target, because then qapi-events.h won't be usable
from target-independent code anymore. Avoid that by generating it
into separate files.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-6-armbru@redhat.com>
The next commit wants to generate qapi-emit-events.{c.h}. To enable
that, extend QAPISchemaModularCVisitor to support additional "system
modules", i.e. modules that don't correspond to a (user-defined) QAPI
schema module.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-5-armbru@redhat.com>
We neglect to call .visit_module() for the special module we use for
built-ins. Harmless, but clean it up anyway. The
tests/qapi-schema/*.out now show the built-in module as 'module None'.
Subclasses of QAPISchemaModularCVisitor need to ._add_module() this
special module to enable code generation for built-ins. When this
hasn't been done, QAPISchemaModularCVisitor.visit_module() does
nothing for the special module. That looks like built-ins could
accidentally be generated into the wrong module when a subclass
neglects to call ._add_module(). Can't happen, because built-ins are
all visited before any other module. But that's non-obvious. Switch
off code generation explicitly.
Rename QAPISchemaModularCVisitor._begin_module() to
._begin_user_module().
New QAPISchemaModularCVisitor._is_builtin_module(), for clarity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-4-armbru@redhat.com>
We generate code for built-ins and sub-modules into separate files
since commit cdb6610ae4 and 252dc3105f (v2.12.0). Both commits
neglected to update documentation. Do that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-2-armbru@redhat.com>
* gdbstub: Send a reply to the vKill packet
* Improve codegen for neon min/max and saturating arithmetic
* Fix a bug in clearing FPSCR exception status bits
* hw/arm/armsse: Fix miswiring of expansion IRQs
* hw/intc/armv7m_nvic: Allow byte accesses to SHPR1
* MAINTAINERS: Remove Peter Crosthwaite from various entries
* arm: Allow system registers for KVM guests to be changed by QEMU code
* linux-user: support HWCAP_CPUID which exposes ID registers to user code
* Fix bug in 128-bit cmpxchg for BE Arm guests
* Implement (no-op) HACR_EL2
* Fix CRn to be 14 for PMEVTYPER/PMEVCNTR
-----BEGIN PGP SIGNATURE-----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=xqVQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190215' into staging
target-arm queue:
* gdbstub: Send a reply to the vKill packet
* Improve codegen for neon min/max and saturating arithmetic
* Fix a bug in clearing FPSCR exception status bits
* hw/arm/armsse: Fix miswiring of expansion IRQs
* hw/intc/armv7m_nvic: Allow byte accesses to SHPR1
* MAINTAINERS: Remove Peter Crosthwaite from various entries
* arm: Allow system registers for KVM guests to be changed by QEMU code
* linux-user: support HWCAP_CPUID which exposes ID registers to user code
* Fix bug in 128-bit cmpxchg for BE Arm guests
* Implement (no-op) HACR_EL2
* Fix CRn to be 14 for PMEVTYPER/PMEVCNTR
# gpg: Signature made Fri 15 Feb 2019 10:19:14 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190215: (25 commits)
gdbstub: Send a reply to the vKill packet.
target/arm: Add missing clear_tail calls
target/arm: Use vector operations for saturation
target/arm: Split out FPSCR.QC to a vector field
target/arm: Fix set of bits kept in xregs[ARM_VFP_FPSCR]
target/arm: Split out flags setting from vfp compares
target/arm: Fix arm_cpu_dump_state vs FPSCR
target/arm: Fix vfp_gdb_get/set_reg vs FPSCR
target/arm: Remove neon min/max helpers
target/arm: Use tcg integer min/max primitives for neon
target/arm: Use vector minmax expanders for aarch32
target/arm: Use vector minmax expanders for aarch64
target/arm: Rely on optimization within tcg_gen_gvec_or
hw/arm/armsse: Fix miswiring of expansion IRQs
hw/intc/armv7m_nvic: Allow byte accesses to SHPR1
MAINTAINERS: Remove Peter Crosthwaite from various entries
arm: Allow system registers for KVM guests to be changed by QEMU code
linux-user/elfload: enable HWCAP_CPUID for AArch64
target/arm: expose remaining CPUID registers as RAZ
target/arm: expose MPIDR_EL1 to userspace
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per the GDB remote protocol documentation
https://sourceware.org/gdb/current/onlinedocs/gdb/Packets.html#index-vKill-packet
the debug stub is expected to send a reply to the 'vKill' packet. At
least some versions of GDB crash if the gdb stub simply exits without
sending a reply. This patch fixes QEMU's gdb stub to conform to the
expected behavior.
Note that QEMU's existing handling of the legacy 'k' packet is
correct: in that case GDB does not expect a reply, and QEMU does not
send one.
Signed-off-by: Sandra Loosemore <sandra@codesourcery.com>
Message-id: 1550008033-26540-1-git-send-email-sandra@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fortunately, the functions affected are so far only called from SVE,
so there is no tail to be cleared. But as we convert more of AdvSIMD
to gvec, this will matter.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For same-sign saturation, we have tcg vector operations. We can
compute the QC bit by comparing the saturated value against the
unsaturated value.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the representation of this field such that it is easy
to set from vector code.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Given that we mask bits properly on set, there is no reason
to mask them again on get. We failed to clear the exception
status bits, 0x9f, which means that the wrong value would be
returned on get. Except in the (probably normal) case in which
the set clears all of the bits.
Simplify the code in set to also clear the RES0 bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Minimize the code within a macro by splitting out a helper function.
Use deposit32 instead of manual bit manipulation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The components of this register is stored in several
different locations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are now unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 32-bit PMIN/PMAX has been decomposed to scalars,
and so can be trivially expanded inline.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since we're now handling a == b generically, we no longer need
to do it by hand within target/arm/.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190209033847.9014-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 91c1e9fcbd where we added dual-CPU support to
the ARMSSE, we set up the wiring of the expansion IRQs via nested
loops: the outer loop on 'i' loops for each CPU, and the inner loop
on 'j' loops for each interrupt. Fix a typo which meant we were
wiring every expansion IRQ line to external IRQ 0 on CPU 0 and
to external IRQ 1 on CPU 1.
Fixes: 91c1e9fcbd ("hw/arm/armsse: Support dual-CPU configuration")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The code for handling the NVIC SHPR1 register intends to permit
byte and halfword accesses (as the architecture requires). However
the 'case' line for it only lists the base address of the
register, so attempts to access bytes other than the first one
end up in the "bad write" default logic. This bug was added
accidentally when we split out the SHPR1 logic from SHPR2 and
SHPR3 to support v6M.
Fixes: 7c9140afd5 ("nvic: Handle ARMv6-M SCS reserved registers")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
The Zephyr RTOS happens to access SHPR1 byte at a time,
which is how I spotted this.
Peter Crosthwaite hasn't had the bandwidth to do code review or
other QEMU work for some time now -- remove his email address
from MAINTAINERS file entries so we don't bombard him with
patch emails.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190207181422.4907-1-peter.maydell@linaro.org
At the moment the Arm implementations of kvm_arch_{get,put}_registers()
don't support having QEMU change the values of system registers
(aka coprocessor registers for AArch32). This is because although
kvm_arch_get_registers() calls write_list_to_cpustate() to
update the CPU state struct fields (so QEMU code can read the
values in the usual way), kvm_arch_put_registers() does not
call write_cpustate_to_list(), meaning that any changes to
the CPU state struct fields will not be passed back to KVM.
The rationale for this design is documented in a comment in the
AArch32 kvm_arch_put_registers() -- writing the values in the
cpregs list into the CPU state struct is "lossy" because the
write of a register might not succeed, and so if we blindly
copy the CPU state values back again we will incorrectly
change register values for the guest. The assumption was that
no QEMU code would need to write to the registers.
However, when we implemented debug support for KVM guests, we
broke that assumption: the code to handle "set the guest up
to take a breakpoint exception" does so by updating various
guest registers including ESR_EL1.
Support this by making kvm_arch_put_registers() synchronize
CPU state back into the list. We sync only those registers
where the initial write succeeds, which should be sufficient.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Dongjiu Geng <gengdongjiu@huawei.com>
Userspace programs should (in theory) query the ELF HWCAP before
probing these registers. Now we have implemented them all make it
public.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190205190224.2198-6-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are a whole bunch more registers in the CPUID space which are
currently not used but are exposed as RAZ. To avoid too much
duplication we expand ARMCPRegUserSpaceInfo to understand glob
patterns so we only need one entry to tweak whole ranges of registers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-5-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As this is a single register we could expose it with a simple ifdef
but we use the existing modify_arm_cp_regs mechanism for consistency.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-4-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A number of CPUID registers are exposed to userspace by modern Linux
kernels thanks to the "ARM64 CPU Feature Registers" ABI. For QEMU's
user-mode emulation we don't need to emulate the kernels trap but just
return the value the trap would have done. To avoid too much #ifdef
hackery we process ARMCPRegInfo with a new helper (modify_arm_cp_regs)
before defining the registers. The modify routine is driven by a
simple data structure which describes which bits are exported and
which are fixed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-3-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although technically not visible to userspace the kernel does make
them visible via a trap and emulate ABI. We provide a new permission
mask (PL0U_R) which maps to PL0_R for CONFIG_USER builds and adjust
the minimum permission check accordingly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190205190224.2198-2-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The lo,hi order is different from the comments. And in commit
1ec182c333 ("target/arm: Convert to HAVE_CMPXCHG128"), it changes
the original code logic. So just restore the old code logic before this
commit:
do_paired_cmpxchg64_be():
cmpv = int128_make128(env->exclusive_high, env->exclusive_val);
newv = int128_make128(new_hi, new_lo);
This fixes a bug that would only be visible for big-endian
AArch64 guest code.
Fixes: 1ec182c333 ("target/arm: Convert to HAVE_CMPXCHG128")
Signed-off-by: Catherine Ho <catherine.hecx@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1548985244-24523-1-git-send-email-catherine.hecx@gmail.com
[PMM: added note that bug only affects BE guests]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
HACR_EL2 is a register with IMPDEF behaviour, which allows
implementation specific trapping to EL2. Implement it as RAZ/WI,
since QEMU's implementation has no extra traps. This also
matches what h/w implementations like Cortex-A53 and A57 do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190205181218.8995-1-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcZZvnAAoJENSXKoln91plz6UH/iqtHfPhGEj6o4CGFIx/8Ru/
k7XU552LgTGvIA1aHt9+dHNYWW/JRl1CvmdeECeAN/yFkKSdDmruW6hLV78dV6Jy
8xnnYt8bQhMfMSCIlkGh+CxFF0BCRoPrtH64ZVgZ9AnN00E6hyFlTHAYJEk8ZlcM
ov05JYneKlZWYDcJnYaGX6T7s8ALcq2O6FDUS88J9AiN303yt+kmaEC2WEt+xju4
+xPPBIIg8nqd3MlrQ/shpFcCOTN0OLQ4V5mQYLvbL3HGTzeZ8eYBRdqQ2DXpW8M8
OOFGhJrmfBYEC/me0T7suZnzLLNGGYz2jQWLlHy32COIAJv6GcUylGd9TDbGGP8=
=Py0Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-feb-14-2019' into staging
MIPS queue for February 14th, 2019
# gpg: Signature made Thu 14 Feb 2019 16:48:39 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-feb-14-2019:
tests/tcg: target/mips: Add tests for MSA logic instructions
tests/tcg: target/mips: Add wrappers for MSA logic instructions
tests/tcg: target/mips: Add tests for MSA interleave instructions
tests/tcg: target/mips: Add wrappers for MSA interleave instructions
tests/tcg: target/mips: Add tests for MSA bit counting instructions
tests/tcg: target/mips: Add wrappers for MSA bit counting instructions
tests/tcg: target/mips: Add a header with test utilities
tests/tcg: target/mips: Add a header with test inputs
tests/tcg: target/mips: Remove an unnecessary file
target/mips: introduce MTTCG-enabled builds
hw/mips_cpc: kick a VP when putting it into Run statewq
target/mips: hold BQL in mips_vpe_wake()
hw/mips_int: hold BQL for all interrupt requests
target/mips: reimplement SC instruction emulation and use cmpxchg
target/mips: compare virtual addresses in LL/SC sequence
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add tests for MSA logic instructions. This includes following
instructions:
* AND.V - logical AND
* NOR.V - logical NOR
* OR.V - logical OR
* XOR.V - logical XOR
Each test consists of 80 test cases, so altogether there are 320
test cases.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add wrappers for MSA logic instructions.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add tests for MSA interleave instructions. This includes following
instructions:
* ILVEV.B - interleave even (bytes)
* ILVEV.H - interleave even (halfwords)
* ILVEV.W - interleave even (words)
* ILVEV.D - interleave even (doublewords)
* ILVOD.B - interleave odd (bytes)
* ILVOD.H - interleave odd (halfwords)
* ILVOD.W - interleave odd (words)
* ILVOD.D - interleave odd (doublewords)
* ILVL.B - interleave left (bytes)
* ILVL.H - interleave left (halfwords)
* ILVL.W - interleave left (words)
* ILVL.D - interleave left (doublewords)
* ILVR.B - interleave right (bytes)
* ILVR.H - interleave right (halfwords)
* ILVR.W - interleave right (words)
* ILVR.D - interleave right (doublewords)
Each test consists of 80 test cases, so altogether there are 1280
test cases.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add wrappers for MSA interleave instructions.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add tests for MSA bit counting instructions. This includes following
instructions:
* NLOC.B - number of leading ones (bytes)
* NLOC.H - number of leading ones (halfwords)
* NLOC.W - number of leading ones (words)
* NLOC.D - number of leading ones (doublewords)
* NLZC.B - number of leading zeros (bytes)
* NLZC.H - number of leading zeros (halfwords)
* NLZC.W - number of leading zeros (words)
* NLZC.D - number of leading zeros (doublewords)
* PCNT.B - population count / number of ones (bytes)
* PCNT.H - population count / number of ones (halfwords)
* PCNT.W - population count / number of ones (words)
* PCNT.D - population count / number of ones (doublewords)
Each test consists of 80 test cases, so altogether there are 960 test
cases.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a header that contains wrappers around MSA instructions assembler
invocations. For now, only bit counting instructions (NLOC, NLZC, and
PCNT; each in four data format flavors) are supported.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a header that contains test utilities. For now, it contains
only a function for checking and printing test results for bit
counting and similar MSA instructions.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Marc-André Lureau
Markus Armbruster
Peter Maydell
Mark Cave-Ayland
Sandra Loosemore
Richard Henderson
Alex Bennée
Catherine Ho
Aaron Lindsay OS
Aleksandar Markovic