Often, the only thing we need to know about the TCG host
is the register size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect the layout of ArchCPU from TCG compilation.
Pass the relative offset of 'env' and 'neg.tlb.f' as a parameter.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes CPUTLBEntry agnostic to the address size of the guest.
When 32-bit addresses are in effect, we can simply read the low
32 bits of the 64-bit field. Similarly when we need to update
the field for setting TLB_NOTDIRTY.
For TCG backends that could in theory be big-endian, but in
practice are not (arm, loongarch, riscv), use QEMU_BUILD_BUG_ON
to document and ensure this is not accidentally missed.
For s390x, which is always big-endian, use HOST_BIG_ENDIAN anyway,
to document the reason for the adjustment.
For sparc64 and ppc64, always perform a 64-bit load, and rely on
the following 32-bit comparison to ignore the high bits.
Rearrange mips and ppc if ladders for clarity.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses replaced with TCGContext.addr_type.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The last use was removed by e77c89fb08.
Fixes: e77c89fb08 ("cputlb: Remove static tlb sizing")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use LPQ/STPQ when 16-byte atomicity is required.
Note that these instructions require 16-byte alignment.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect guest page size from TCG compilation.
While this could be done via exec/target_page.h, we want to cache
the value across multiple memory access operations, so we might
as well initialize this early.
The changes within tcg/ are entirely mechanical:
sed -i s/TARGET_PAGE_BITS/s->page_bits/g
sed -i s/TARGET_PAGE_MASK/s->page_mask/g
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit hosts, we cannot simply rely on TCGContext.addr_bits,
as we need one or two host registers to represent the guest address.
Create the new opcodes and update all users. Since we have not
yet eliminated TARGET_LONG_BITS, only one of the two opcodes will
ever be used, so we can get away with treating them the same in
the backends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add opcodes for backend support for 128-bit memory operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the unparameterized TCG_TARGET_HAS_MEMORY_BSWAP macro
with a function with a memop argument.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of using helper_unaligned_{ld,st}, use the full load/store helpers.
This will allow the fast path to increase alignment to implement atomicity
while not immediately raising an alignment exception.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
Hoist the qemu_{ld,st}_helpers arrays to tcg.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Adjust the softmmu tlb to use R0+R1, not any of the normally available
registers. Since we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than zero-extend the guest address into a register,
use an add instruction which zero-extends the second input.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_tlb_load, add_qemu_ldst_label, tcg_out_test_alignment,
tcg_prepare_user_ldst, and some code that lived in both tcg_out_qemu_ld
and tcg_out_qemu_st into one function that returns HostAddress and
TCGLabelQemuLdst structures.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Collect the 3 potential parts of the host address into a struct.
Reorg tcg_out_qemu_{ld,st}_direct to use it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We need to set this in TCGLabelQemuLdst, so plumb this
all the way through from tcg_out_op.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will want a backend interface for register swapping.
This is only properly defined for x86; all others get a
stub version that always indicates failure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is common code in most qemu_{ld,st} slow paths, extending the
input value for the store helper data argument or extending the
return value from the load helper.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for type truncation. For those backends
that did not enable TCG_TARGET_HAS_extrl_i64_i32, use tcg_out_mov.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for type extension with zero.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for type extension with sign.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 32-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 32-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 16-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 16-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 8-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 8-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the parameters for the host ABI for Int128 for
those backends which require no extra modification.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the flat array tcg_target_call_oarg_regs[] with
a function call including the TCGCallReturnKind.
Extend the set of registers for ARM to r0-r3 to match the ABI:
https://github.com/ARM-software/abi-aa/blob/main/aapcs32/aapcs32.rst#result-return
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the function for arm, i386, and s390x, which will use it.
Add stubs for all other backends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We now have the option to generate direct or indirect
goto_tb depending on the dynamic displacement, thus
the define is no longer necessary or completely accurate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace 'tc_ptr' and 'addr' with 'tb' and 'n'.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The INDEX_op_goto_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similar to the existing set_jmp_reset_offset. Move any assert for
TCG_TARGET_HAS_direct_jump into the new function (which now cannot
be build-time). Will be unused if TCG_TARGET_HAS_direct_jump is
constant 0, but we can't test for constant in the preprocessor,
so just mark it G_GNUC_UNUSED.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The INDEX_op_exit_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Load constants in no more than two insns, which turns
out to be faster than using the constant pool.
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge maybe_out_small_movi, as it no longer has additional users.
Use is_const_p{16,32}.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Give 64-bit comparison second operand a signed 33-bit immediate.
This is the smallest superset of uint32_t and int32_t, as used
by CLGFI and CGFI respectively. The rest of the 33-bit space
can be loaded into TCG_TMP0. Drop use of the constant pool.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is an older form that produces per-byte results,
and a newer form that produces per-register results.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reuse code from movcond to conditionally copy a2 to dest,
based on the condition codes produced by FLOGR.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The new select instruction provides two separate register inputs,
whereas the old load-on-condition instruction overlaps one of the
register inputs with the destination.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Generalize movcond to support pre-computed conditions, and the same
set of arguments at all times. This will be assumed by a following
patch, which needs to reuse tgen_movcond_int.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Return both regular and inverted condition codes from tgen_cmp2.
This lets us choose after the fact which comparision we want.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is andc, orc, nand, nor, eqv.
We can use nor for implementing not.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let the register allocator handle such immediates by matching
only what one insn can achieve.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson