Since we dropped darwin-user support many years ago, the code in
user-exec to support hosts which define __APPLE__ is unused; delete it.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that configure blocks attempts to build user-mode code on hppa
and m68k hosts, we can delete the cpu_signal_handler() implementations
for those architectures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The exception_action() function in user-exec.c is just a call to
cpu_loop_exit() for every target CPU except i386. Since this
function is only called if the target's handle_mmu_fault() hook has
indicated an MMU fault, and that hook is only called from the
handle_cpu_signal() code path, we can simply move the x86-specific
setup into that hook, which allows us to remove the TARGET_I386
ifdef from user-exec.c.
Of the actions that were done by the call to raise_interrupt_err():
* cpu_svm_check_intercept_param() is a no-op in user mode
* check_exception() is a no-op since double faults are impossible
for user-mode
* assignments to cs->exception_index and env->error_code are no-ops
* assigning to env->exception_next_eip is unnecessary because it
is not used unless env->exception_is_int is true
* cpu_loop_exit_restore() is equivalent to cpu_loop_exit() since
pc is 0
which leaves just setting env_>exception_is_int as the action that
needs to be added to x86_cpu_handle_mmu_fault().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Message-id: 1463494687-25947-7-git-send-email-peter.maydell@linaro.org
Extracting the old signal mask from the usercontext pointer passed to
a signal handler is a pain because it is OS and CPU dependent.
Since we've already done it once and passed it to handle_cpu_signal(),
there's no need to do it again in cpu_exit_tb_from_sighandler().
This then means we don't need to pass a usercontext pointer in to
handle_cpu_signal() at all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Message-id: 1463494687-25947-5-git-send-email-peter.maydell@linaro.org
The function cpu_resume_from_signal() is now always called with a
NULL puc argument, and is rather misnamed since it is never called
from a signal handler. It is essentially forcing an exit to the
top level cpu loop but without raising any exception, so rename
it to cpu_loop_exit_noexc() and drop the useless unused argument.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Message-id: 1463494687-25947-4-git-send-email-peter.maydell@linaro.org
Since the only caller of page_unprotect() which might cause it to
need to call cpu_resume_from_signal() is handle_cpu_signal() in
the user-mode code, push the longjump handling out to that function.
Since this is the only caller of cpu_resume_from_signal() which
passes a non-NULL puc argument, split the non-NULL handling into
a new cpu_exit_tb_from_sighandler() function. This allows us
to merge the softmmu and usermode implementations of the
cpu_resume_from_signal() function, which are now identical.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Message-id: 1463494687-25947-3-git-send-email-peter.maydell@linaro.org
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
qemu_printf is an ancient remnant which has been a simple #define to
printf for over a decade, and is used in only a few places. Expand
it out in those places and remove the #define.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Remove them from the sundry exec-all.h header, since they are only used by
the TCG runtime in exec.c and user-exec.c.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A couple of #ifdef changes necessary to use NetBSD's ucontext
structs on sparc64 and arm.
Signed-off-by: Tobias Nygren <tnn@NetBSD.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1425591461-17550-1-git-send-email-tnn@NetBSD.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will collect all load and store helpers soon. For now
it is just a replacement for softmmu_exec.h, which this patch
stops including directly, but we also include it where this will
be necessary in order to simplify the next patch.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the kernel doesn't pass any info on the reason for the fault,
disassemble the instruction to detect a store.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Note that while such functions may exist both for *-user and softmmu,
only *-user uses the CPUState hook, while softmmu reuses the prototype
for calling it directly.
Signed-off-by: Andreas Färber <afaerber@suse.de>
When forwarding a segmentation fault into the guest process, we were passing
the host's address directly into the guest process's signal descriptor.
That obviously confused the guest process, since it didn't know what to make
of the (usually 32-bit truncated) address. Passing in h2g(address) makes the
guest process a lot happier.
To make the code more obvious, introduce a h2g_nocheck() macro that does the
same as h2g(), but allows us to convert addresses that may be outside of guest
mapped range into the guest's view of address space.
This fixes java running in arm-linux-user for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In the ARM implementation of cpu_signal_handler(), set is_write
correctly using the FSR value which the kernel passes us in the
error_code field of uc_mcontext. Since the WnR bit of the FSR was
only introduced in ARMv6, this means that v5 cores will continue
to behave as before this patch, but they are not really supported
as hosts for linux-user mode anyway since they do not have the
modern behaviour for unaligned accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1370352705-27590-1-git-send-email-peter.maydell@linaro.org
The setjmp() function doesn't specify whether signal masks are saved and
restored; on Linux they are not, but on BSD (including MacOSX) they are.
We want to have consistent behaviour across platforms, so we should
always use "don't save/restore signal mask" (this is also generally
going to be faster). This also works around a bug in MacOSX where the
signal-restoration on longjmp() affects the signal mask for a completely
different thread, not just the mask for the thread which did the longjmp.
The most visible effect of this was that ctrl-C was ignored on MacOSX
because the CPU thread did a longjmp which resulted in its signal mask
being applied to every thread, so that all threads had SIGINT and SIGTERM
blocked.
The POSIX-sanctioned portable way to do a jump without affecting signal
masks is to siglongjmp() to a sigjmp_buf which was created by calling
sigsetjmp() with a zero savemask parameter, so change all uses of
setjmp()/longjmp() accordingly. [Technically POSIX allows sigsetjmp(buf, 0)
to save the signal mask; however the following siglongjmp() must not
restore the signal mask, so the pair can be effectively considered as
"sigjmp/longjmp which don't touch the mask".]
For Windows we provide a trivial sigsetjmp/siglongjmp in terms of
setjmp/longjmp -- this is OK because no user will ever pass a non-zero
savemask.
The setjmp() uses in tests/tcg/test-i386.c and tests/tcg/linux-test.c
are left untouched because these are self-contained singlethreaded
test programs intended to be run under QEMU's Linux emulation, so they
have neither the portability nor the multithreading issues to deal with.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* bonzini/header-dirs: (45 commits)
janitor: move remaining public headers to include/
hw: move executable format header files to hw/
fpu: move public header file to include/fpu
softmmu: move remaining include files to include/ subdirectories
softmmu: move include files to include/sysemu/
misc: move include files to include/qemu/
qom: move include files to include/qom/
migration: move include files to include/migration/
monitor: move include files to include/monitor/
exec: move include files to include/exec/
block: move include files to include/block/
qapi: move include files to include/qobject/
janitor: add guards to headers
qapi: make struct Visitor opaque
qapi: remove qapi/qapi-types-core.h
qapi: move inclusions of qemu-common.h from headers to .c files
ui: move files to ui/ and include/ui/
qemu-ga: move qemu-ga files to qga/
net: reorganize headers
net: move net.c to net/
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
the test for glibc < 2 "succeeds" wrongly for any non-glibc C library,
and breaks the build on musl libc.
we must first test if __GLIBC__ is defined at all, before using it
unconditionally.
Signed-off-by: John Spencer <maillist-qemu@barfooze.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Refactor common code around calls to cpu_restore_state().
tb_find_pc() has now no external users, make it static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.
Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.
Remove unused HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Global register AREG0 was always assumed to be usable in user-exec.c,
but this is incorrect for several targets.
Fix with #ifdeffery and by using other variables.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
glibc 2.16 will remove the undocumented definition of 'struct siginfo'
from <bits/siginfo.h>.
This change is already present in glibc 2.15.90, so qemu compilation
of certain targets (eg. cris-user) breaks.
This struct was always typedef'd to be the same as 'siginfo_t' which
is what POSIX documents, so use that instead.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add an explicit CPUX86State parameter instead of relying on AREG0.
Merge raise_exception_env() to raise_exception(), likewise with
raise_exception_err_env() and raise_exception_err().
Introduce cpu_svm_check_intercept_param() and cpu_vmexit()
as wrappers.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
h2g() will assert if passed an address that's not a valid guest address,
so handle_cpu_signal() needs to check before passing "data address
which caused a segfault" to it, since for a misbehaving guest
that could be anything. If the address isn't a valid guest address
then we can simply skip the attempt to unprotect a guest page
which was made read-only to catch self-modifying code.
This assertion probably fires more readily now than it used to
do because of recent changes to default to reserving guest address
space.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use uintptr_t instead of void * or unsigned long in
several op related functions, env->mem_io_pc and
GETPC() macro.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Parameter is_softmmu (and its evil mutant twin brother is_softmuu)
is not used in cpu_*_handle_mmu_fault() functions, remove them
and adjust callers.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move softmmu_exec.h include directives from target-*/exec.h to
target-*/op_helper.c. Move also various other stuff only used in
op_helper.c there.
Define global env in dyngen-exec.h.
For i386, move wrappers for segment and FPU helpers from user-exec.c
to op_helper.c. Implement raise_exception_err_env() to handle dynamic
CPUState. Move the function declarations to cpu.h since they can be
used outside of op_helper.c context.
LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and
env_to_regs().
ARM: make raise_exception() static.
Convert
#include "exec.h"
to
#include "cpu.h"
#include "dyngen-exec.h"
and remove now unused target-*/exec.h.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
