commit f7aa558396 pulled the dcache and icache
line size initialization inside of a '#if !defined(CONFIG_USER_ONLY)' block.
This is not correct because instructions like 'dcbz' need the dcache size
initialized even for user mode.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Cc: Varun Sethi <Varun.Sethi@freescale.com>
[AF: Simplify #ifdefs by using cache line size 32 for *-user as before]
Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move code from cpu_state_reset() into ppc_cpu_reset().
Reorder #include of helper_regs.h to use it in translate_init.c.
Adjust whitespace and add braces.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Move code not dependent on ppc_def_t from cpu_ppc_init() into an initfn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Embed CPUPPCState as first member of PowerPCCPU.
Distinguish between "powerpc-cpu", "powerpc64-cpu" and
"embedded-powerpc-cpu".
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
On target-ppc, our table of CPU types and features encodes the features as
found on the hardware, regardless of whether these features are actually
usable under TCG or KVM. We already have cases where the information from
the cpu table must be fixed up to account for limitations in the emulation
method we're using. e.g. TCG does not support the DFP and VSX instructions
and KVM needs different numbering of the CPUs in order to tell it the
correct thread to core mappings.
This patch cleans up these hacks to handle emulation limitations by
consolidating them into a pair of functions specifically for the purpose.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[AF: Style and typo fixes, rename new functions and drop ppc_def_t arg]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 41557447d3 also introduced a subtle TLB
flush bug. By applying a mask to the interrupt MSR which cleared the IR/DR
bits at the start of the interrupt handler, the logic towards the end of the
handler to force a TLB flush if either one of these bits were set would never
be triggered.
This patch simply changes the IR/DR bit check in the TLB flush logic to use
the original MSR value (albeit with some interrupt-specific bits cleared) so
that the IR/DR bits are preserved at the point where the check takes place.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Use uintptr_t instead of void * or unsigned long in
several op related functions, env->mem_io_pc and
GETPC() macro.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The official spelling is QEMU.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[blauwirbel@gmail.com: fixed comment style in hw/sun4m.c]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When we dump the CPU registers, there's a certain chance they haven't been
synchronized with KVM yet, so we have to manually trigger that.
This aligns the code with x86 and fixes a bug where the register state was
bogus on invalid/unknown kvm exit reasons.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
'POWERPC_INSNS2_DEFAULT' was defined incorrectly which was causing the
opcode table creation code to erroneously register 'eieio' and 'mbar'
for the "default" processor:
** ERROR: opcode 1a already assigned in opcode table 16
*** ERROR: unable to insert opcode [1f-16-1a]
*** ERROR initializing PowerPC instruction 0x1f 0x16 0x1a
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix large page support in TCG. The old code would overwrite the large page
table entry with the fake 4 KB one generated here whenever the ref/change bits
were updated, causing it to point to the wrong area of memory.
Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Acked-by: David Gibson <david@gibson.drobpear.id.au>
[agraf: fix whitespace, braces]
Signed-off-by: Alexander Graf <agraf@suse.de>
The POWER7 emulation is missing the Processor Identification Register,
mandatory in recent POWER CPUs, that is required for SMP on at least
some operating systems (e.g. FreeBSD) to function properly. This patch
copies the existing PIR code from the other CPUs that implement it.
Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
These instructions for loading and storing byte-swapped 64-bit values have
been introduced in PowerISA 2.06.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
For the pseries machine, TCE (IOMMU) tables can either be directly
malloc()ed in qemu or, when running on a KVM which supports it, mmap()ed
from a KVM ioctl. The latter option is used when available, because it
allows the (frequent bottlenext) H_PUT_TCE hypercall to be KVM accelerated.
However, even when KVM is persent, TCE acceleration is not always possible.
Only KVM HV supports this ioctl(), not KVM PR, or the kernel could run out
of contiguous memory to allocate the new table. In this case we need to
fall back on the malloc()ed table.
When a device is removed, and we need to remove the TCE table, we need to
either munmap() or free() the table as appropriate for how it was
allocated. The code is supposed to do that, but we buggily fail to
initialize the tcet->fd variable in the malloc() case, which is used as a
flag to determine which is the right choice.
This patch fixes the bug, and cleans up error messages relating to this
path while we're at it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
sed -i "s/CPUState/CPUPPCState/g" target-ppc/*.[hc]
sed -i "s/#define CPUPPCState/#define CPUState/" target-ppc/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Frees the identifier cpu_reset for QOM CPUs (manual rename).
Don't hide the parameter type behind explicit casts, use static
functions with strongly typed argument to indirect.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
On ppc405ep there is a register that allows for software to reset the
core, but not the whole system. Implement this reset using a reset
interrupt.
This gets rid of a bunch of #if 0'ed code.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Fix this error:
/src/qemu/target-ppc/helper.c: In function 'booke206_tlb_to_page_size':
/src/qemu/target-ppc/helper.c:1296:14: error: variable 'tlbncfg' set but not used [-Werror=unused-but-set-variable]
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When running Linux on e500 with powersave-nap enabled, Linux tries to
read out the L1CFG0 register and calculates some things from it. Passing
0 there ends up in a division by 0, resulting in -1, resulting in badness.
So let's populate the L1CFG0 register with reasonable defaults. That way
guests aren't completely confused.
Reported-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The e500mc implements Embedded.Processor Control, so enable it and
thus enable guests to IPI each other. This makes -smp work with -cpu
e500mc.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch implements the msgsnd instruction. It is part of the
Embedded.Processor Control specification and allows one CPU to
IPI another CPU without going through an interrupt controller.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch implements the msgclr instruction. It is part of the
Embedded.Processor Control specification and clears pending doorbell
interrupts on the current CPU.
Signed-off-by: Alexander Graf <agraf@suse.de>
We already had all the code available to have doorbell exceptions
be handled properly. It was just disabled.
Enable it, so we can rely on it.
Signed-off-by: Alexander Graf <agraf@suse.de>
We're going to introduce doorbell instructions (called processor
control in the spec) soon. Add some defines for easier patch
readability later.
Signed-off-by: Alexander Graf <agraf@suse.de>
Our EXCP list is getting outdated. By now, 3 new exception vectors have
been introduced. Update the list so we have everything at one place.
Signed-off-by: Alexander Graf <agraf@suse.de>
We can have TLBs that only support a single page size. This is defined
by the absence of the AVAIL flag in TLBnCFG. If this is the case, we
currently write invalid size info into the TLB, but override it on
internal fault.
Let's move the check over to tlbwe, so we don't have the AVAIL check in
the hotter fault path.
Signed-off-by: Alexander Graf <agraf@suse.de>
Our internal helpers to fetch TLB entries were not able to tell us
that an entry doesn't even exist. Pass an error out if we hit such
a case to not accidently pass beyond the TLB array.
Signed-off-by: Alexander Graf <agraf@suse.de>
The PowerPC 2.06 BookE ISA defines an opcode called "tlbilx" which is used
to flush TLB entries. It's the recommended way of flushing in virtualized
environments.
So far we got away without implementing it, but Linux for e500mc uses this
instruction, so we better add it :).
Signed-off-by: Alexander Graf <agraf@suse.de>
When setting a TLB entry, we need to check if the TLB we're putting it in
actually supports the given size. According to the 2.06 PowerPC ISA, a
value that's out of range can either be redefined to something implementation
dependent or we can raise an illegal opcode exception. We do the latter.
Signed-off-by: Alexander Graf <agraf@suse.de>
When using MAV 2.0 TLB registers, we have another range of TLB registers
available to read the supported page sizes from.
Add SPR definitions for those and add a helper function that we can use
to receive such a bitmap even when using MAV 1.0.
Signed-off-by: Alexander Graf <agraf@suse.de>
We might want to call the tlb check function without actually caring about
the real address resolution. Check if we really should write the value
back.
Signed-off-by: Alexander Graf <agraf@suse.de>
The msync instruction as defined today is only valid on 4xx cores, not
on e500 which also supports msync, but treats it the same way as sync.
Rename it to reflect that it's 4xx only.
Signed-off-by: Alexander Graf <agraf@suse.de>
The e500 CPUs don't use 440's msync which falls on the same opcode IDs,
but instead use the real powerpc sync instruction. This is important,
since the invalid mask differs between the two.
Signed-off-by: Alexander Graf <agraf@suse.de>
Our code only knows IVORs up to 37. Add the new ones defined in ISA 2.06
from 38 - 42.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Unfortunately the HIOR setting code slipped into upstream QEMU
before it was pulled into upstream KVM. And since Murphy is always
right, comments on the patches only emerged on the pull request
leading to changes in the interface.
So here's an update to the HIOR setting. While at it, I also relaxed
it a bit since for HV KVM we can already run fine without and 3.2
works just fine with HV KVM but when not setting HIOR. We will only
need this when running PAPR in PR KVM.
Since we accidently changed the ABI and API along the way, we have
to update the underlying kernel headers together with the code that
uses it to not break bisectability.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have 440 TLB emulation, we can also support running the 440EP
CPU target in system emulation mode.
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit c5705a772 ("vmstate, memory: decouple vmstate from memory API") changed
the signature of memory_region_init_ram_ptr() but did not update a caller in
the ppc kvm module. Fix.
Signed-off-by: Avi Kivity <avi@redhat.com>
This core is found on chips such as p4080, p3041, p2040, and p5020.
More needs to be done to make this viable for TCG (such as missing SPRs
and instructions), but this suffices to get KVM running with appropriate
kernel support.
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
[scottwood@freescale.com: tweak some flags]
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
When guest reset, we need to halt secondary cpus until guest kick them.
This already works for tcg. The patch add the support for kvm.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf: remove in-kernel irqchip code]
When run with a PPC Book3S (server) CPU Currently 'info tlb' in the
qemu monitor reports "dump_mmu: unimplemented". However, during
bringup work, it can be quite handy to have the SLB entries, which are
available in the CPUPPCState. This patch adds an implementation of
info tlb for book3s, which dumps the SLB.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When using gdb to single step a ppc interrupt routine, the execution
flow passes the rfi instruction without actually returning from the
interrupt.
The patch fixes this by avoiding to update the nip when the debug
exception is raised and a previous POWERPC_EXCP_SYNC was set.
The latter is the case only, if code for rfi or a related instruction
was generated.
Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: Alexander Graf <agraf@suse.de>
The CPU state contains two bitmaps, initialized from the CPU spec
which describes which instructions are implemented on the CPU. A
couple of bits are defined which cover instructions (VSX and DFP)
which are not currently implemented in TCG. So far, these are only
used to handle the case of -cpu host because a KVM guest can use
the instructions when the host CPU supports them.
However, it's a mild layering violation to simply not include those
bits in the CPU descriptions for those CPUs that do support them,
just because we can't handle them in TCG. This patch corrects the
situation, so that the instruction bits _are_ shown correctly in the
cpu spec table, but are masked out from the cpu state in the non-KVM
case.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Sufficiently recent kernels include a KVM call to accelerate use of
PAPR TCE tables (IOMMU), which are used by PAPR virtual IO devices.
This involves qemu mapping the TCE table in from a kernel obtained fd,
which currently we do with PROT_READ only. This is a hangover from
early (never released) versions of this kernel interface which only
permitted read-only mappings and required us to destroy and recreate
the table when we needed to clear it from qemu.
Now, the kernel permits read-write mappings, and we rely on this to
clear the table in spapr_vio_quiesce_one(). However, due to
insufficient testing, I forgot to update the actual mapping of the
table in kvmppc_create_spapr_tce() to add PROT_WRITE to the mmap().
This patch corrects the oversight.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
