Thanks to f527c57935
(fix parallel build), these prerequisites
are redundant now and can be removed.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
PCI spec states:
if a masked vector has its Pending bit set, and the associated
underlying interrupt events are somehow satisfied (usually by software
though the exact manner is function-specific), the function must clear
the Pending bit, to avoid sending a spurious interrupt message later
when software unmasks the vector.
In our case this happens if vector becomes unused.
Clear pending bit in this case.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On reset, we currently clear all bits in msix control register *except*
enable bit. This is wrong: the spec says we should clear writeable
bits: function mask and enable bit.
Correct this.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
msix state is managed by OS, not the
driver, so it's wrong to touch it
on io from driver.
Mark all vectors unused instead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
goto into scope is evil. rearrange pci_bridge_filter
so that we always go to end of function on error.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
- fix bridge prefetchable memory accesser to check 64bit or not.
- use pcibus_t consistently instead mixing pcibus_t and uint64_t.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch replaces magic number, 256, with ARRAY_SIZE().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split bar address math into a separate function.
In particular, this gets rid of an ugly forward goto
into scope that we have there.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
This patch removes unused constants committed by
fb23162885.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch moves two typedefs, PCIHostState and PCIExpressHost to
qemu-common.h for consistency as PCIBus and PCIDevice are typedefed
in qemu-common.h.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch removes some comment which should go into commit log
in pci.h.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch replaces for loop by memset in pci_init_wmask().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
including pci_host.h isn't needed by pci.c.
This patch kills it.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch removes unnecessary & 0xff in pci_dev_find_by_addr().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch renames pci_find_host_bus() to pci_find_root_bus()
as suggested by "Michael S. Tsirkin" <mst@redhat.com>.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Because pci_sub_bus() is used only once so eliminate it
by open coding as suggested by "Michael S. Tsirkin" <mst@redhat.com>.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_host_data_register_io_memory and its variants are too long a bit.
So shorten them. Now they are
pci_host_{conf, data}_register_{mmio, mmio_noswap, ioport}()
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch renames pci_addr_to_dev(), pcie_mmcfg_addr_to_dev()
to pci_dev_find_by_addr(), pcie_dev_find_by_mmcfg_addr()
as "Michael S. Tsirkin" <mst@redhat.com> suggested.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch removes pci_addr_to_config() and open code it
as suggested by Michael S. Tsirkin <mst@redhat.com>.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove switch on length: we don't care about
high bits for value, so just return all ones
if no device. And add one assert().
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
Now pci host stuff has been moved from pci.[hc] to pci_host.[hc]
so the declaration of pci_data_{read, write}() should be in
pci_host.h
This patch moves them from pci.h to pci_host.h for consistency.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It printed wrong limit value of bridge.
This patch fixes it.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci.h declares some functions which aren't
defined in pci.h. Clean up moving things
to appropriate headers, and update all users.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
A few words about design choices:
* Two registers, at and t0, are reserved for TCG internal use. They are
useful for bswap and 64-bit ops.
* Most ops supports a constant argument with value 0, which is actually
mapped to the zero register.
* While the at register is available for constant loading, ops only
support a limited range of constants. TCG does a better job doing the
register allocation and constant loading by itself. There are plenty of
registers available anyway.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Currently the ll/sc instructions use the virtual address in both
user and system mode. Use the physical address insteead in system
mode.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This causes ctrl+alt+u or ctrl+alt+f to not work when windows hasn't been
resized first. Other graphic emulators do resize the screen on
hw_invalidate.
This reverts commit 0bd8246bfe.
Fix cpu_get_real_ticks:
- check should be done on __mips and not __mips_isa_rev
- linux kernels >= 2.6.25 are emulating the 2 needed rdhwr functions
so it's safe to use rdhwr.
This is better than what's currently in but it doesn't mean it works nicely
Some tests needs to be done imho
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In a bunch of places, 64 is used as value of _NSIG but it's wrong
at least on MIPS were _NSIG is 128.
Based on a patch from Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This includes the following changes:
42bc394 Make sure to reenable ata interrupts even on error.
494dfc6 Move SeaBIOS post/boot stack to avoid conflict with gPXE.
3133e38 Test for broken gcc -combine on FC12.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reqrite bitbanging I2C implementation. New code improves stop/start
condition handling, and gives more accurate input line level.
Introduce intermediate abstraction layer for I2C bitbanging that
is not connected via a GPIO port.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Add makefile dependencies for target specific device configs.
These will copy the default config if none exists, obsoleting the old
configure time code. If a config already exists but is older than the
default then print a warning.
Also remove config-devices.h. Code does not and should not care which
devices are being built.
Signed-off-by: Paul Brook <paul@codesourcery.com>
