Commit Graph

42 Commits

Author SHA1 Message Date
Richard Henderson 01ecaf438b tcg: Merge GETPC and GETRA
The return address argument to the softmmu template helpers was
confused.  In the legacy case, we wanted to indicate that there
is no return address, and so passed in NULL.  However, we then
immediately subtracted GETPC_ADJ from NULL, resulting in a non-zero
value, indicating the presence of an (invalid) return address.

Push the GETPC_ADJ subtraction down to the only point it's required:
immediately before use within cpu_restore_state_from_tb, after all
NULL pointer checks have been completed.

This makes GETPC and GETRA identical.  Remove GETRA as the lesser
used macro, replacing all uses with GETPC.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-09-16 08:12:11 -07:00
Peter Maydell c5679026d5 user-exec: Remove unused code for OSX hosts
Since we dropped darwin-user support many years ago, the code in
user-exec to support hosts which define __APPLE__ is unused; delete it.

Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-26 13:17:20 +03:00
Peter Maydell 4259a820d2 user-exec: Delete now-unused hppa and m68k cpu_signal_handler() code
Now that configure blocks attempts to build user-mode code on hppa
and m68k hosts, we can delete the cpu_signal_handler() implementations
for those architectures.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-26 13:17:20 +03:00
Peter Maydell 0c33682d5f target-i386: Move user-mode exception actions out of user-exec.c
The exception_action() function in user-exec.c is just a call to
cpu_loop_exit() for every target CPU except i386.  Since this
function is only called if the target's handle_mmu_fault() hook has
indicated an MMU fault, and that hook is only called from the
handle_cpu_signal() code path, we can simply move the x86-specific
setup into that hook, which allows us to remove the TARGET_I386
ifdef from user-exec.c.

Of the actions that were done by the call to raise_interrupt_err():
 * cpu_svm_check_intercept_param() is a no-op in user mode
 * check_exception() is a no-op since double faults are impossible
   for user-mode
 * assignments to cs->exception_index and env->error_code are no-ops
 * assigning to env->exception_next_eip is unnecessary because it
   is not used unless env->exception_is_int is true
 * cpu_loop_exit_restore() is equivalent to cpu_loop_exit() since
   pc is 0
which leaves just setting env_>exception_is_int as the action that
needs to be added to x86_cpu_handle_mmu_fault().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Message-id: 1463494687-25947-7-git-send-email-peter.maydell@linaro.org
2016-06-09 15:55:02 +01:00
Peter Maydell a5852dc5de user-exec: Don't reextract sigmask from usercontext pointer
Extracting the old signal mask from the usercontext pointer passed to
a signal handler is a pain because it is OS and CPU dependent.
Since we've already done it once and passed it to handle_cpu_signal(),
there's no need to do it again in cpu_exit_tb_from_sighandler().
This then means we don't need to pass a usercontext pointer in to
handle_cpu_signal() at all.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Message-id: 1463494687-25947-5-git-send-email-peter.maydell@linaro.org
2016-06-09 15:55:02 +01:00
Peter Maydell 6886b98036 cpu-exec: Rename cpu_resume_from_signal() to cpu_loop_exit_noexc()
The function cpu_resume_from_signal() is now always called with a
NULL puc argument, and is rather misnamed since it is never called
from a signal handler. It is essentially forcing an exit to the
top level cpu loop but without raising any exception, so rename
it to cpu_loop_exit_noexc() and drop the useless unused argument.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Message-id: 1463494687-25947-4-git-send-email-peter.maydell@linaro.org
2016-06-09 15:55:02 +01:00
Peter Maydell f213e72f23 user-exec: Push resume-from-signal code out to handle_cpu_signal()
Since the only caller of page_unprotect() which might cause it to
need to call cpu_resume_from_signal() is handle_cpu_signal() in
the user-mode code, push the longjump handling out to that function.

Since this is the only caller of cpu_resume_from_signal() which
passes a non-NULL puc argument, split the non-NULL handling into
a new cpu_exit_tb_from_sighandler() function. This allows us
to merge the softmmu and usermode implementations of the
cpu_resume_from_signal() function, which are now identical.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Message-id: 1463494687-25947-3-git-send-email-peter.maydell@linaro.org
2016-06-09 15:55:02 +01:00
Paolo Bonzini 63c915526d cpu: move exec-all.h inclusion out of cpu.h
exec-all.h contains TCG-specific definitions.  It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.

One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:29 +02:00
Peter Maydell d38ea87ac5 all: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2016-02-04 17:41:30 +00:00
Peter Maydell 71baf787d8 osdep.h: Remove qemu_printf
qemu_printf is an ancient remnant which has been a simple #define to
printf for over a decade, and is used in only a few places. Expand
it out in those places and remove the #define.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2015-08-19 16:29:53 +01:00
Paolo Bonzini 1652b97476 exec: move functions to translate-all.h
Remove them from the sundry exec-all.h header, since they are only used by
the TCG runtime in exec.c and user-exec.c.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05 17:09:59 +02:00
Tobias Nygren 7ccfb495c6 user-exec.c: fix build on NetBSD/sparc64 and NetBSD/arm
A couple of #ifdef changes necessary to use NetBSD's ucontext
structs on sparc64 and arm.

Signed-off-by: Tobias Nygren <tnn@NetBSD.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1425591461-17550-1-git-send-email-tnn@NetBSD.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-13 15:57:00 +00:00
Paolo Bonzini f08b617018 softmmu: introduce cpu_ldst.h
This will collect all load and store helpers soon.  For now
it is just a replacement for softmmu_exec.h, which this patch
stops including directly, but we also include it where this will
be necessary in order to simplify the next patch.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05 16:10:33 +02:00
Richard Henderson 661f7fa4b0 tcg-aarch64: Properly detect SIGSEGV writes
Since the kernel doesn't pass any info on the reason for the fault,
disassemble the instruction to detect a store.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-16 12:12:32 -04:00
Andreas Färber 2ef1f68d4f user-exec: Change exception_action() argument to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:52:48 +01:00
Andreas Färber 0ea8cb8895 cpu-exec: Change cpu_resume_from_signal() argument to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:48 +01:00
Andreas Färber 3f38f309b2 translate-all: Change cpu_restore_state() argument to CPUState
This lets us drop some local variables in tlb_fill() functions.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:47 +01:00
Andreas Färber 5638d180d6 cpu-exec: Change cpu_loop_exit() argument to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:47 +01:00
Andreas Färber 27103424c4 cpu: Move exception_index field from CPU_COMMON to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:46 +01:00
Andreas Färber 6f03bef0ff cpu: Move jmp_env field from CPU_COMMON to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:46 +01:00
Andreas Färber 7510454e3e cpu: Turn cpu_handle_mmu_fault() into a CPUClass hook
Note that while such functions may exist both for *-user and softmmu,
only *-user uses the CPUState hook, while softmmu reuses the prototype
for calling it directly.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:46 +01:00
Alexander Graf 732f9e89a1 linux-user: fix segmentation fault passing with h2g(x) != x
When forwarding a segmentation fault into the guest process, we were passing
the host's address directly into the guest process's signal descriptor.

That obviously confused the guest process, since it didn't know what to make
of the (usually 32-bit truncated) address. Passing in h2g(address) makes the
guest process a lot happier.

To make the code more obvious, introduce a h2g_nocheck() macro that does the
same as h2g(), but allows us to convert addresses that may be outside of guest
mapped range into the guest's view of address space.

This fixes java running in arm-linux-user for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23 17:28:28 +03:00
Anthony Liguori 51455c59dd QOM CPUState refactorings
* Fix for OpenRISCCPU subclasses
 * Fix for gdbstub CPU selection
 * Move linux-user CPU functions into new header
 * CPUState part 10 refactoring: first_cpu, next_cpu, cpu_single_env et al.
 * Fix some targets to consistently inline TCG code generation
 * Centrally log CPU reset
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJR3VkXAAoJEPou0S0+fgE/KFQP/3eUyCzZ6QmUG3gmrnfYRDMH
 uwMstD1JRUc5kTEC2bMtld8zZKwx2kxMJpe5fizig8GaLka0J5U2wyvwskkX27ag
 7ouNwFdD/dOmvaKfcqHYKbA3CTuIrbnMm7nzrXpLnWXCiMlW1XmXttQsb3hoAjjt
 asFxQIHONNIgqpcJBrz/C6XX2bEkLra4s2QlXPE5Bl3QkKTtK9+NYahHtgIk3Y7Y
 fqbAxebNGh9eZ9PKjPExhNBZ17Yi4ciM7UB7yrXFYOfwKSpmmTsJdu/m776b1oAK
 c/zWO0uea+sLsMnibnSD1foeeZJItDQDRid+PjC44zB5kS8pkPcT5+TVB04Zilap
 rhNF2Fox+fe8eIc/2WuY3ZGchVjrD/EPbFFCCRQ/qI3Nb98WfLCDu3pAP1hRdo+p
 P6qCH5JmWYcR+2gp8MHY0NtqcklL8A2HpQTRvX1mUliMJbE+unanT4nmKolOTYrm
 +6jvp72GkmqqaLQDQ0d8ig/GmcI9QeftSFD5Y8p5prPsMkQbOAbOUSBlPgwY+Syl
 QmP8xNNzbj00UF8GvRL/m9O75geis/I+op5E7hJqaO5U1yd+ww5Z1EFvDEkUOeYu
 BclqCg1jTnzBzE/FaRP0NWFAUDR+4Z0tumdRES1cDfaMJr3+pYT7y8tjVZn7PEvn
 Ljq+/pyyiunG3Mbvw2o8
 =lFBU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging

QOM CPUState refactorings

* Fix for OpenRISCCPU subclasses
* Fix for gdbstub CPU selection
* Move linux-user CPU functions into new header
* CPUState part 10 refactoring: first_cpu, next_cpu, cpu_single_env et al.
* Fix some targets to consistently inline TCG code generation
* Centrally log CPU reset

# gpg: Signature made Wed 10 Jul 2013 07:52:39 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Andreas Färber (41) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony: (43 commits)
  cpu: Move reset logging to CPUState
  target-ppc: Change LOG_MMU_STATE() argument to CPUState
  target-i386: Change LOG_PCALL_STATE() argument to CPUState
  log: Change log_cpu_state[_mask]() argument to CPUState
  target-i386: Change do_smm_enter() argument to X86CPU
  target-i386: Change do_interrupt_all() argument to X86CPU
  target-xtensa: Change gen_intermediate_code_internal() arg to XtensaCPU
  target-unicore32: Change gen_intermediate_code_internal() signature
  target-sparc: Change gen_intermediate_code_internal() argument to SPARCCPU
  target-sh4: Change gen_intermediate_code_internal() argument to SuperHCPU
  target-s390x: Change gen_intermediate_code_internal() argument to S390CPU
  target-ppc: Change gen_intermediate_code_internal() argument to PowerPCCPU
  target-mips: Change gen_intermediate_code_internal() argument to MIPSCPU
  target-microblaze: Change gen_intermediate_code_internal() argument types
  target-m68k: Change gen_intermediate_code_internal() argument to M68kCPU
  target-lm32: Change gen_intermediate_code_internal() argument to LM32CPU
  target-i386: Change gen_intermediate_code_internal() argument to X86CPU
  target-cris: Change gen_intermediate_code_internal() argument to CRISCPU
  target-arm: Change gen_intermediate_code_internal() argument to ARMCPU
  target-alpha: Change gen_intermediate_code_internal() argument to AlphaCPU
  ...
2013-07-10 10:54:16 -05:00
Andreas Färber 4917cf4432 cpu: Replace cpu_single_env with CPUState current_cpu
Move it to qom/cpu.h.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:20:28 +02:00
Peter Maydell 023b0ae33b user-exec.c: Set is_write correctly in the ARM cpu_signal_handler()
In the ARM implementation of cpu_signal_handler(), set is_write
correctly using the FSR value which the kernel passes us in the
error_code field of uc_mcontext. Since the WnR bit of the FSR was
only introduced in ARMv6, this means that v5 cores will continue
to behave as before this patch, but they are not really supported
as hosts for linux-user mode anyway since they do not have the
modern behaviour for unaligned accesses.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1370352705-27590-1-git-send-email-peter.maydell@linaro.org
2013-07-05 15:45:40 +03:00
Claudio Fontana f129061c6a user-exec.c: aarch64 initial implementation of cpu_signal_handler
Signed-off-by: Claudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 51AF4028.5030504@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-12 16:20:23 +01:00
Peter Maydell 6ab7e5465a Replace all setjmp()/longjmp() with sigsetjmp()/siglongjmp()
The setjmp() function doesn't specify whether signal masks are saved and
restored; on Linux they are not, but on BSD (including MacOSX) they are.
We want to have consistent behaviour across platforms, so we should
always use "don't save/restore signal mask" (this is also generally
going to be faster). This also works around a bug in MacOSX where the
signal-restoration on longjmp() affects the signal mask for a completely
different thread, not just the mask for the thread which did the longjmp.
The most visible effect of this was that ctrl-C was ignored on MacOSX
because the CPU thread did a longjmp which resulted in its signal mask
being applied to every thread, so that all threads had SIGINT and SIGTERM
blocked.

The POSIX-sanctioned portable way to do a jump without affecting signal
masks is to siglongjmp() to a sigjmp_buf which was created by calling
sigsetjmp() with a zero savemask parameter, so change all uses of
setjmp()/longjmp() accordingly. [Technically POSIX allows sigsetjmp(buf, 0)
to save the signal mask; however the following siglongjmp() must not
restore the signal mask, so the pair can be effectively considered as
"sigjmp/longjmp which don't touch the mask".]

For Windows we provide a trivial sigsetjmp/siglongjmp in terms of
setjmp/longjmp -- this is OK because no user will ever pass a non-zero
savemask.

The setjmp() uses in tests/tcg/test-i386.c and tests/tcg/linux-test.c
are left untouched because these are self-contained singlethreaded
test programs intended to be run under QEMU's Linux emulation, so they
have neither the portability nor the multithreading issues to deal with.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23 16:11:19 +00:00
Anthony Liguori 27dd773058 Merge remote-tracking branch 'bonzini/header-dirs' into staging
* bonzini/header-dirs: (45 commits)
  janitor: move remaining public headers to include/
  hw: move executable format header files to hw/
  fpu: move public header file to include/fpu
  softmmu: move remaining include files to include/ subdirectories
  softmmu: move include files to include/sysemu/
  misc: move include files to include/qemu/
  qom: move include files to include/qom/
  migration: move include files to include/migration/
  monitor: move include files to include/monitor/
  exec: move include files to include/exec/
  block: move include files to include/block/
  qapi: move include files to include/qobject/
  janitor: add guards to headers
  qapi: make struct Visitor opaque
  qapi: remove qapi/qapi-types-core.h
  qapi: move inclusions of qemu-common.h from headers to .c files
  ui: move files to ui/ and include/ui/
  qemu-ga: move qemu-ga files to qga/
  net: reorganize headers
  net: move net.c to net/
  ...

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19 17:15:39 -06:00
Paolo Bonzini 76cad71136 build: kill libdis, move disassemblers to disas/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:29:06 +01:00
John Spencer e12cdb1b40 fix build error on ARM due to wrong glibc check
the test for glibc < 2 "succeeds" wrongly for any non-glibc C library,
and breaks the build on musl libc.
we must first test if __GLIBC__ is defined at all, before using it
unconditionally.

Signed-off-by: John Spencer <maillist-qemu@barfooze.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-18 17:21:13 +01:00
Blue Swirl a8a826a3c3 exec: refactor cpu_restore_state
Refactor common code around calls to cpu_restore_state().

tb_find_pc() has now no external users, make it static.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-16 08:35:24 +00:00
Blue Swirl 89c33337fd Remove unused CONFIG_TCG_PASS_AREG0 and dead code
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.

Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.

Remove unused HELPER_CFLAGS.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-09-15 17:51:14 +00:00
Blue Swirl 1846ec2c6a user: fix accidental AREG0 use
Global register AREG0 was always assumed to be usable in user-exec.c,
but this is incorrect for several targets.

Fix with #ifdeffery and by using other variables.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09 18:34:57 +00:00
Richard W.M. Jones 02d2bd5d57 Replace 'struct siginfo' with 'siginfo_t'.
glibc 2.16 will remove the undocumented definition of 'struct siginfo'
from <bits/siginfo.h>.

This change is already present in glibc 2.15.90, so qemu compilation
of certain targets (eg. cris-user) breaks.

This struct was always typedef'd to be the same as 'siginfo_t' which
is what POSIX documents, so use that instead.

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-01 08:54:07 -05:00
Blue Swirl 77b2bc2c09 x86: avoid AREG0 for exceptions
Add an explicit CPUX86State parameter instead of relying on AREG0.

Merge raise_exception_env() to raise_exception(), likewise with
raise_exception_err_env() and raise_exception_err().

Introduce cpu_svm_check_intercept_param() and cpu_vmexit()
as wrappers.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-28 20:28:08 +00:00
Peter Maydell c5954819b6 user-exec.c: Don't assert on segfaults for non-valid addresses
h2g() will assert if passed an address that's not a valid guest address,
so handle_cpu_signal() needs to check before passing "data address
which caused a segfault" to it, since for a misbehaving guest
that could be anything. If the address isn't a valid guest address
then we can simply skip the attempt to unprotect a guest page
which was made read-only to catch self-modifying code.

This assertion probably fires more readily now than it used to
do because of recent changes to default to reserving guest address
space.

Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-08 11:15:18 -05:00
Blue Swirl 2050396801 Use uintptr_t for various op related functions
Use uintptr_t instead of void * or unsigned long in
several op related functions, env->mem_io_pc and
GETPC() macro.

Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-14 14:23:37 +00:00
Andreas Färber 9349b4f9fd Rename CPUState -> CPUArchState
Scripted conversion:
  for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
    sed -i "s/CPUState/CPUArchState/g" $file
  done

All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14 22:20:27 +01:00
Blue Swirl 97b348e7d2 Remove unused is_softmmu parameter from cpu_handle_mmu_fault
Parameter is_softmmu (and its evil mutant twin brother is_softmuu)
is not used in cpu_*_handle_mmu_fault() functions, remove them
and adjust callers.

Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-07 09:32:01 +00:00
Blue Swirl 3e4571724f exec.h cleanup
Move softmmu_exec.h include directives from target-*/exec.h to
target-*/op_helper.c. Move also various other stuff only used in
op_helper.c there.

Define global env in dyngen-exec.h.

For i386, move wrappers for segment and FPU helpers from user-exec.c
to op_helper.c. Implement raise_exception_err_env() to handle dynamic
CPUState. Move the function declarations to cpu.h since they can be
used outside of op_helper.c context.

LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and
env_to_regs().

ARM: make raise_exception() static.

Convert
#include "exec.h"
to
#include "cpu.h"
#include "dyngen-exec.h"
and remove now unused target-*/exec.h.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30 09:41:14 +00:00
Blue Swirl 1162c041c1 cpu_loop_exit: avoid using AREG0
Make cpu_loop_exit() take a parameter for CPUState instead of relying
on global env.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26 18:25:13 +00:00
Blue Swirl 42a623c7db Move user emulator stuff from cpu-exec.c to user-exec.c
Simplify cpu-exec.c by refactoring.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-28 06:26:00 +00:00