Convert the VQRDMLAH and VQRDMLSH insns in the 2-reg-scalar
group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VQDMULH and VQRDMULH insns in the 2-reg-scalar group
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the float versions of VMLA, VMLS and VMUL in the Neon
2-reg-scalar group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
As noted in the comment on the WRAP_FP_FN macro, we could have
had a do_2scalar_fp() function, but for 3 insns it seemed
simpler to just do the wrapping to get hold of the fpstatus ptr.
(These are the only fp insns in the group.)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VMLA, VMLS and VMUL insns in the Neon "2 registers and a
scalar" group to decodetree. These are 32x32->32 operations where
one of the inputs is the scalar, followed by a possible accumulate
operation of the 32-bit result.
The refactoring removes some of the oddities of the old decoder:
* operands to the operation and accumulation were often
reversed (taking advantage of the fact that most of these ops
are commutative); the new code follows the pseudocode order
* the Q bit in the insn was in a local variable 'u'; in the
new code it is decoded into a->q
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In commit 37bfce81b1 we accidentally introduced a leak of a TCG
temporary in do_2shift_env_64(); free it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Mark the arrays of function pointers in trans_VSHLL_S_2sh() and
trans_VSHLL_U_2sh() as both 'static' and 'const'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 3-reg-diff insn polynomial VMULL. This is the last
insn in this group to be converted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 3-reg-diff insns VQDMULL, VQDMLAL and VQDMLSL:
these are all saturating doubling long multiplies with a possible
accumulate step.
These are the last insns in the group which use the pass-over-each
elements loop, so we can delete that code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 3-reg-diff insns VMULL, VMLAL and VMLSL; these perform
a 32x32->64 multiply with possible accumulate.
Note that for VMLSL we do the accumulate directly with a subtraction
rather than doing a negate-then-add as the old code did.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 3-reg-diff insns VABAL and VABDL to decodetree.
Like almost all the remaining insns in this group, these are
a combination of a two-input operation which returns a double width
result and then a possible accumulation of that double width
result into the destination.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the narrow-to-high-half insns VADDHN, VSUBHN, VRADDHN,
VRSUBHN in the Neon 3-registers-different-lengths group to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the "pre-widening" insns VADDL, VSUBL, VADDW and VSUBW
in the Neon 3-registers-different-lengths group to decodetree.
These insns work by widening one or both inputs to double their
size, performing an add or subtract at the doubled size and
then storing the double-size result.
As usual, rather than copying the loop of the original decoder
(which needs awkward code to avoid problems when source and
destination registers overlap) we just unroll the two passes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The widenfn() in do_vshll_2sh() does not free the input 32-bit
TCGv, so we need to do this in the calling code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
According to the gcrypt documentation it's intended that
gcry_check_version() is called with the minimum version of gcrypt
needed by the program, not the version from the <gcrypt.h> header file
that happened to be installed when qemu was compiled. Indeed the
gcrypt.h header says that you shouldn't use the GCRYPT_VERSION macro.
This causes the following failure:
qemu-img: Unable to initialize gcrypt
if a slightly older version of libgcrypt is installed with a newer
qemu, even though the slightly older version works fine. This can
happen with RPM packaging which uses symbol versioning to determine
automatically which libgcrypt is required by qemu, which caused the
following bug in RHEL 8:
https://bugzilla.redhat.com/show_bug.cgi?id=1840485
qemu actually requires libgcrypt >= 1.5.0, so we might put the string
"1.5.0" here. However since 1.5.0 was released in 2011, it hardly
seems we need to check that. So I replaced GCRYPT_VERSION with NULL.
Perhaps in future if we move to requiring a newer version of gcrypt we
could put a literal string here.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add tests:
test_secret_keyring_good;
test_secret_keyring_revoked_key;
test_secret_keyring_expired_key;
test_secret_keyring_bad_serial_key;
test_secret_keyring_bad_key_access_right;
Added tests require libkeyutils. The absence of this library is not
critical, because these tests will be skipped in this case.
Signed-off-by: Alexey Krasikov <alex-krasikov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the ability for the secret object to obtain secret data from the
Linux in-kernel key managment and retention facility, as an extra option
to the existing ones: reading from a file or passing directly as a
string.
The secret is identified by the key serial number. The upper layers
need to instantiate the key and make sure the QEMU process has access
permissions to read it.
Signed-off-by: Alexey Krasikov <alex-krasikov@yandex-team.ru>
- Fixed up detection logic default behaviour in configure
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Create base class 'common secret'. Move common data and logic from
'secret' to 'common_secret' class. This allowed adding abstraction layer
for easier adding new 'secret' objects in future.
Convert 'secret' class to child from basic 'secret_common' with 'data'
and 'file' properties.
Signed-off-by: Alexey Krasikov <alex-krasikov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In case of not using random-number needing feature, it makes sense to
skip RNG init too. This is especially helpful when QEMU is sandboxed in
Stubdomain under Xen, where there is very little entropy so initial
getrandom() call delays the startup several seconds. In that setup, no
random bytes are needed at all.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The last real change to this file is from 2012, so it is very likely
that this file is completely out-of-date and ignored today. Let's
simply remove it to avoid confusion if someone finds it by accident.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200611172445.5177-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keep them close to the other accelerator-dependent stubs, so as to remove
stubs that are not needed by tools.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When QEMU is used without any graphical window,
QEMU execution is terminated with the signal (e.g., Ctrl-C).
Signal processing in QEMU does not include
qemu_system_shutdown_request call. That is why shutdown
event is not recorded by record/replay in this case.
This patch adds shutdown event to the end of the record log.
Now every replay will shutdown the machine at the end.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <159012995470.27967.18129611453659045726.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CPUReadMemoryFunc/CPUWriteMemoryFunc typedefs are legacy
remnant from before the conversion to MemoryRegions.
Since they are now only used in tusb6010.c and hcd-musb.c,
move them to "hw/usb/musb.h" and rename them appropriately.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200601141536.15192-4-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the declarations for the MUSB-HDRC USB2.0 OTG compliant core
into a separate header.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200601141536.15192-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 62a0db942d ('memory: Remove old_mmio accessors')
this structure is unused. Remove it.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200601141536.15192-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Logic reversed: allowed list should just be ignored. Instead we
only take that into account :(
Fixes: e11b06a880 ("checkpatch: ignore allowed diff list")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200602053614.54745-1-mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEVState is contained with SevGuestState. We've now fixed redundancies
and name conflicts, so there's no real point to the nested structure. Just
move all the fields of SEVState into SevGuestState.
This eliminates the SEVState structure, which as a bonus removes the
confusion with the SevState enum.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200604064219.436242-10-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The user can explicitly specify a handle via the "handle" property wired
to SevGuestState::handle. That gets passed to the KVM_SEV_LAUNCH_START
ioctl() which may update it, the final value being copied back to both
SevGuestState::handle and SEVState::handle.
AFAICT, nothing will be looking SEVState::handle before it and
SevGuestState::handle have been updated from the ioctl(). So, remove the
field and just use SevGuestState::handle directly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200604064219.436242-9-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEVState::policy is set from the final value of the policy field in the
parameter structure for the KVM_SEV_LAUNCH_START ioctl(). But, AFAICT
that ioctl() won't ever change it from the original supplied value which
comes from SevGuestState::policy.
So, remove this field and just use SevGuestState::policy directly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200604064219.436242-8-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SEVState structure has cbitpos and reduced_phys_bits fields which are
simply copied from the SevGuestState structure and never changed. Now that
SEVState is embedded in SevGuestState we can just access the original copy
directly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200604064219.436242-7-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SEV code uses a pretty ugly global to access its internal state. Now
that SEVState is embedded in SevGuestState, we can avoid accessing it via
the global in some cases. In the remaining cases use a new global
referencing the containing SevGuestState which will simplify some future
transformations.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200604064219.436242-6-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently SevGuestState contains only configuration information. For
runtime state another non-QOM struct SEVState is allocated separately.
Simplify things by instead embedding the SEVState structure in
SevGuestState.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200604064219.436242-5-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the moment this is a purely passive object which is just a container for
information used elsewhere, hence the name. I'm going to change that
though, so as a preliminary rename it to SevGuestState.
That name risks confusion with both SEVState and SevState, but I'll be
working on that in following patches.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200604064219.436242-4-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Neither QSevGuestInfo nor SEVState (not to be confused with SevState) is
used anywhere outside target/i386/sev.c, so they might as well live in
there rather than in a (somewhat) exposed header.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200604064219.436242-3-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This structure is nothing but an empty wrapper around the parent class,
which by QOM conventions means we don't need it at all.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200604064219.436242-2-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xen PCI passthrough support may not be available and thus the global
variable "has_igd_gfx_passthru" might be compiled out. Common code
should not access it in that case.
Unfortunately, we can't use CONFIG_XEN_PCI_PASSTHROUGH directly in
xen-common.c so this patch instead move access to the
has_igd_gfx_passthru variable via function and those functions are
also implemented as stubs. The stubs will be used when QEMU is built
without passthrough support.
Now, when one will want to enable igd-passthru via the -machine
property, they will get an error message if QEMU is built without
passthrough support.
Fixes: 46472d8232 ('xen: convert "-machine igd-passthru" to an accelerator property')
Reported-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200603160442.3151170-1-anthony.perard@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-14-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no similar field in CPUX86State, but it's needed for MMIO traps.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-13-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The lazy flags are still needed for instruction decoder.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-12-r.bolshakov@yadro.com>
[Move struct to target/i386/cpu.h - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HVFX86EmulatorState carries it's own copy of x86 registers. It can be
dropped in favor of regs in generic CPUX86State.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-11-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the ones provided in target/i386/cpu.h instead.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-10-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HVFX86EmulatorState carries it's own copy of x86 flags. It can be
dropped in favor of eflags in generic CPUX86State.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-9-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The field is used to print address of instructions that have no parser
in decode_invalid(). RIP from VMCS is saved into fetch_rip before
decoding starts but it's also saved into env->eip in load_regs().
Therefore env->eip can be used instead of fetch_rip.
While at it, correct address printed in decode_invalid(). It prints an
address before the unknown instruction.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-8-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop and replace rip field from HVFX86EmulatorState in favor of eip from
common CPUX86State.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-7-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There's no need to read VMCS twice, instruction length is already
available in ins_len.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-6-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-5-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
They have no use.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20200528193758.51454-4-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
They're either declared elsewhere or have no use.
While at it, rename _hvf_cpu_synchronize_post_init() to
do_hvf_cpu_synchronize_post_init().
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-3-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
"sysemu/hvf.h" is intended for inclusion in generic code. However it
also contains several hvf definitions and declarations, including
HVFState that are used only inside "hvf.c". "hvf-i386.h" would be more
appropriate place to define HVFState as it's only included by "hvf.c"
and "x86_task.c".
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200528193758.51454-2-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>