Version: GnuPG v1
iQEcBAABAgAGBQJWZZJPAAoJEO8Ells5jWIRmp0H/26aFXVEgZykkUVNbqq05r7w
AI7podQlFOAESJHqZtR8FMaH8TAZ5GhphP4pn0PsWp54VjwcYZbdoME+dhZ4Elyc
WDanRHIweLv/zVg6+M8oHhw5GMaxtFLoLWrf0oanbUW9IZZmmM3COz/Y31hSVrR2
EzEJi1VZZhpMj3ibeOJns4MrugYrne8MtOdvusE/Uw2rJBTiStnWw1eTk8RmkNcg
5un1mQZxFU2AcNzmWdmWJmjY0rCnR3HhtTdZOwjM6uZGIJ9hbsItGzqiGadBfozI
fUtIa2HZahioe0VIzoB0snXnAuhV1jA0Uy18i04dPvgQOmiVSRjQNE2/lwQflyE=
=Pad3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 07 Dec 2015 14:06:07 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
lan9118: log and ignore access to invalid registers, rather than aborting
lan9118: fix emulation of MAC address loaded bit in E2P_CMD register
vmxnet3: silence warning
pcnet: fix rx buffer overflow(CVE-2015-7512)
net: pcnet: add check to validate receive data size(CVE-2015-7504)
e1000: fix hang of win2k12 shutdown with flood ping
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this change, access to invalid/unimplemented device registers are
logged as a "guest error" rather than aborting qemu with
hw_error. This enables drivers for similar devices (e.g. SMSC 9221),
by simply ignoring the unimplemented writes. It's also closer to what
real hardware does.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There appears to have been a longstanding typo in the implementation
of the "MAC address loaded" bit in the E2P_CMD (EEPROM command)
register. The code was using 0x10, but the controller spec says it
should be bit 8 (0x100).
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
vmxnet3 always produces a warning under qtest.
This is not a user error, don't warn.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Backends could provide a packet whose length is greater than buffer
size. Check for this and truncate the packet to avoid rx buffer
overflow in this case.
Cc: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In loopback mode, pcnet_receive routine appends CRC code to the
receive buffer. If the data size given is same as the buffer size,
the appended CRC code overwrites 4 bytes after s->buffer. Added a
check to avoid that.
Reported by: Qinghao Tang <luodalongde@gmail.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000 driver in Win2k12 is really well rotten. It 100% hangs on shutdown
of UP VM under flood ping. The guest checks card state and reinjects
itself interrupt in a loop. This is fatal for UP machine.
There is no good way to fix this misbehavior but to kludge it. The
emulation has interrupt throttling register aka ITR which limits
interrupt rate and allows the guest to proceed this phase.
There is no problem with this kludge for Linux guests - it adjust the
value of it itself.
On the other hand according to the initial research in
commit e9845f0985
Author: Vincenzo Maffione <v.maffione@gmail.com>
Date: Fri Aug 2 18:30:52 2013 +0200
e1000: add interrupt mitigation support
...
Interrupt mitigation boosts performance when the guest suffers from
an high interrupt rate (i.e. receiving short UDP packets at high packet
rate). For some numerical results see the following link
http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf
this should also boost performance a bit.
See https://bugzilla.redhat.com/show_bug.cgi?id=874406 for additional
details.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Vincenzo Maffione <v.maffione@gmail.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
http://lists.nongnu.org/archive/html/qemu-devel/2015-11/msg04592.html
shows an example how an endless loop in function action_command can
be achieved.
During my code review, I noticed a 2nd case which can result in an
endless loop.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Some features (such as ctrl vq) are supported
by qemu without need to communicate with the
backend.
Drop them from the feature mask so we set them
unconditionally.
Reported-by: Victor Kaplansky <vkaplans@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
First of all, RESET_OWNER message is sent incorrectly, as it's sent
before GET_VRING_BASE. And the reset message would let the later call
get nothing correct.
And, sending SET_VRING_ENABLE at stop, which has already been done,
makes more sense than RESET_OWNER.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJWREdzAAoJEO8Ells5jWIRI18H/0CEDVwj7AJHLEpAv07hX2iS
jfq6Osgj5hDChv43+66Clz3owog3m9NfPKWxBMvIw5c/Q1mFvNuxZcUaVOzX2dT4
E+IwIsZxXOANIGPYtCxOhARz1zNSDxJxgYPMVuIDZ+uZVJqYeCjdduMGzgy8wt8H
qiquUCI2sktg97AntZqzp8iWfZZIN5w6uNbf3FvgwIffWDxGRPt8wY6dlwgIpsx2
uFd9PMwtj7lJyV9guy36FdrS7MhVTCF5/5GIerPj2nN1ByJp9vu5InzPAlmZNRSZ
KxKcBnmkLsnT3nDN86ZS6ajDyjeEgWSVdrQS9MHDURfinADuuqjbJkhME/UhG+g=
=vRNP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 12 Nov 2015 08:01:55 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net: netmap: use error_setg() helpers in place of error_report()
net: netmap: Fix compilation issue
e1000: Introducing backward compatibility command line parameter
e1000: Implementing various counters
e1000: Fixing the packet address filtering procedure
e1000: Fixing the received/transmitted octets' counters
e1000: Fixing the received/transmitted packets' counters
e1000: Trivial implementation of various MAC registers
e1000: Introduced an array to control the access to the MAC registers
e1000: Add support for migrating the entire MAC registers' array
e1000: Cosmetic and alignment fixes
slirp: Fix type casts and format strings in debug code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This follows the previous patches, where support for migrating the
entire MAC registers' array, and some new MAC registers were introduced.
This patch introduces the e1000-specific boolean parameter
"extra_mac_registers", which is on by default. Setting it to off will
enable migration to older versions of QEMU, but will disable the read
and write access to the new registers, that were introduced since adding
the ability to migrate the entire MAC array.
Example for usage to enable backward compatibility and to disable the
new MAC registers:
qemu-system-x86_64 -device e1000,extra_mac_registers=off,... ...
As mentioned above, the default value is "on".
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This implements the following Statistic registers (various counters)
according to Intel's specs:
TSCTC GOTCL GOTCH GORCL GORCH MPRC BPRC RUC ROC
BPTC MPTC PTC... PRC...
PLEASE NOTE: these registers will not be active, nor will migrate, until
a compatibility flag will be set (in the next patch in this series).
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Previously, if promiscuous unicast was enabled, a packet was received
straight away, even if it was a multicast or a broadcast packet. This
patch fixes that behavior, while making the filtering procedure a bit
more human-readable.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Previously, these 64-bit registers did not stick at their maximal
values when (and if) they reached them, as they should do, according to
the specs.
This patch introduces a function that takes care of such registers,
avoiding code duplication, making the relevant parts more compatible
with the QEMU coding style, while ensuring that in the unlikely case
of reaching the maximal value, the counter will stick there, as it
supposed to.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
According to Intel's specs, these counters (as the other Statistic
registers) stick at 0xffffffff when this maximal value is reached.
Previously, they would reset after the max. value.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
These registers appear in Intel's specs, but were not implemented.
These registers are now implemented trivially, i.e. they are initiated
with zero values, and if they are RW, they can be written or read by the
driver, or read only if they are R (essentially retaining their zero
values). For these registers no other procedures are performed.
For the trivially implemented Diagnostic registers, a debug warning is
produced on read/write attempts.
PLEASE NOTE: these registers will not be active, nor will migrate, until
a compatibility flag will be set (in a later patch in this series).
The registers implemented here are:
Transmit:
RW: AIT
Management:
RW: WUC WUS IPAV IP6AT* IP4AT* FFLT* WUPM* FFMT* FFVT*
Diagnostic:
RW: RDFH RDFT RDFHS RDFTS RDFPC PBM* TDFH TDFT TDFHS
TDFTS TDFPC
Statistic:
RW: FCRUC
R: RNBC TSCTFC MGTPRC MGTPDC MGTPTC RFC RJC SCC ECOL
LATECOL MCC COLC DC TNCRS SEC CEXTERR RLEC XONRXC
XONTXC XOFFRXC XOFFTXC
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The array of uint8_t's which is introduced here, contains access metadata
about the MAC registers: if a register is accessible, but partly implemented,
or if a register requires a certain compatibility flag in order to be
accessed. Currently, 6 hypothetical flags are supported (3 exist for e1000
so far) but in the future, if more than 6 flags will be needed, the datatype
of this array can simply be swapped for a larger one.
This patch is intended to solve the following current problems:
1) In a scenario of migration between different versions of QEMU, which
differ by the MAC registers implemented in them, some registers need not to
be active if a compatibility flag is set, in order to preserve the machine's
state perfectly for the older version. Checking this for each register
individually, would create a lot of clutter in the code.
2) Some registers are (or may be) only partly implemented (e.g.
placeholders that allow reading and writing, but lack other functions).
In such cases it is better to print a debug warning on read/write attempts.
As above, dealing with this functionality on a per-register level, would
require longer and more messy code.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch makes the migration of the entire array of MAC registers
possible during live migration. The entire array is just 128 KB long, so
practically no penalty should be felt when transmitting it, additionally
to the previously transmitted individual registers. The advantage here is
eliminating the need to introduce new vmstate subsections in the future,
when additional MAC registers will be implemented.
Backward compatibility is preserved by introducing a e1000-specific
boolean parameter (in a later patch), which will be on by default.
Setting it to off would enable migration to older versions of QEMU.
Additionally, this parameter will be used to control the access to the
extra MAC registers in the future.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This fixes some alignment and cosmetic issues. The changes are made
in order that the following patches in this series will look like
integral parts of the code surrounding them, while conforming to the
coding style. Although some changes in unrelated areas are also made.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A few uses of error_set(ERROR_CLASS_GENERIC_ERROR) were missed in
c6bd8c706, or have snuck in since. Nuke them.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447224690-9743-19-git-send-email-eblake@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
[Indentation tidied up, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The goal is to have debug code always compiled during build.
We standardize all debug output on the following format:
[QOM_TYPE_NAME]reporting_function: debug message
The qemu_log_mask() output is following the same format as the
above debug.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 57e565982db94fb433c32dfa17608888464d21de.1445781957.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Guest OS may issue VMXNET3_CMD_GET_STATS even before device was
activated (for example in linux, after insmod but prior net-dev open).
Accessing shared descriptors prior device activation is illegal as the
VMXNET3State structures have not been fully initialized.
As a result, guest memory gets corrupted and may lead to guest OS
crashes.
Fix, by not filling the stats descriptors if device is inactive.
Reported-by: Leonid Shatz <leonid.shatz@ravellosystems.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Dana Rubin <dana.rubin@ravellosystems.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Set initial MAC address to the one specified by the command line.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A new vhost user message is added to allow QEMU to ask to vhost user backend to
broadcast a fake RARP after live migration for guest without GUEST_ANNOUNCE
capability.
This new message is sent only if the backend supports the new
VHOST_USER_PROTOCOL_F_RARP protocol feature.
The payload of this new message is the MAC address of the guest (not known by
the backend). The MAC address is copied in the first 6 bytes of a u64 to avoid
to create a new payload message type.
This new message has no equivalent ioctl so a new callback is added in the
userOps structure to send the request.
Upon reception of this new message the vhost user backend must generate and
broadcast a fake RARP request to notify the migration is terminated.
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
[Rebased and fixed checkpatch errors - Marc-André]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
Some vhost user backends are able to support live migration.
To provide this service the following features must be added:
1. Add the VIRTIO_NET_F_GUEST_ANNOUNCE capability to vhost-net when netdev
backend is vhost-user.
2. Provide a nop receive callback to vhost-user.
This callback is called by:
* qemu_announce_self after a migration to send fake RARP to avoid network
outage for peers talking to the migrated guest.
- For guest with GUEST_ANNOUNCE capabilities, guest already sends GARP
when the bit VIRTIO_NET_S_ANNOUNCE is set.
=> These packets must be discarded.
- For guest without GUEST_ANNOUNCE capabilities, migration termination
is notified when the guest sends packets.
=> These packets can be discarded.
* virtio_net_tx_bh with a dummy boot to send fake bootp/dhcp request.
BIOS guest manages virtio driver to send 4 bootp/dhcp request in case of
dummy boot.
=> These packets must be discarded.
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
Replace the generic vhost_call() by specific functions for each
function call to help with type safety and changing arguments.
While doing this, I found that "unsigned long long" and "uint64_t" were
used interchangeably and causing compilation warnings, using uint64_t
instead, as the vhost & protocol specifies.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Fix enum usage and MQ - Thibaut Collet]
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
Version: GnuPG v1
iQEcBAABAgAGBQJWG2e/AAoJEO8Ells5jWIRcYcH/2D11W8cToCBjGDuw/u9K1ht
S3oGyFasOEq3lm3+a3zQE+vDw0RDkjLEMhcTVwNskJQl6k6Ts5JleTZ6wffvUKPM
UCozgPOCt1ZAdGskwdbByc+NhaVBHIiEsmlbDKqP22CENdDx6GWjcFW4brA4tQJQ
AW36EH77j/M+7/KiSukcUfIexILUZJRfN+ICJVyNTpGsqUNJtFqiVPBMPyJhKCEq
3pr3yJ2lf78SAEF5kBeBc9r/PDWUhtqExBsrK0L8Ey1FdrCy8ldqDPGecT4TsxNv
W/KX5AqhKSsMI8DQKdbv/IKaUdjYWNjTRQ2Qjm8Vt0hcW0PhxR0NYi6bV4yjDNM=
=f26Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 12 Oct 2015 08:56:47 BST using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tests: add test cases for netfilter object
netfilter: add a netbuffer filter
net/queue: export qemu_net_queue_append_iov
netfilter: print filter info associate with the netdev
netfilter: add an API to pass the packet to next filter
net/queue: introduce NetQueueDeliverFunc
net: merge qemu_deliver_packet and qemu_deliver_packet_iov
netfilter: hook packets before net queue send
init/cleanup of netfilter object
vl.c: init delayed object after net_init_clients
vmxnet3: Add support for VMXNET3_CMD_GET_ADAPTIVE_RING_INFO command
e1000: use alias for default model
vmxnet3: Support reading IMR registers on bar0
net/vmxnet3: Refine l2 header validation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some drivers (e.g. vmware-tools) issue the VMXNET3_CMD_GET_ADAPTIVE_RING_INFO
command.
Currently, due to lack of support, a bogus value (-1) is returned.
Support this command, returning the "adaptive-ring disabled" flag.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Instead of duplicating the "e1000-82540em" device model as "e1000",
make the latter an alias for the former.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Instead of asserting, return the actual IMR register value.
This is aligned with what's returned on ESXi.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Tested-by: Dana Rubin <dana.rubin@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Validation of l2 header length assumed minimal packet size as
eth_header + 2 * vlan_header regardless of the actual protocol.
This caused crash for valid non-IP packets shorter than 22 bytes, as
'tx_pkt->packet_type' hasn't been assigned for such packets, and
'vmxnet3_on_tx_done_update_stats()' expects it to be properly set.
Refine header length validation in 'vmxnet_tx_pkt_parse_headers'.
Check its return value during packet processing flow.
As a side effect, in case IPv4 and IPv6 header validation failure,
corrupt packets will be dropped.
Signed-off-by: Dana Rubin <dana.rubin@ravellosystems.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patchas in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When packet is truncated during receiving, we drop the packets but
neither discard the descriptor nor add and signal used
descriptor. This will lead several issues:
- sg mappings are leaked
- rx will be stalled if a lots of packets were truncated
In order to be consistent with vhost, fix by discarding the descriptor
in this case.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Originally, timers were ticks based, and it made sense to
add ticks to current time to know when to trigger an alarm.
But since commit:
7447545 change all other clock references to use nanosecond resolution accessors
All timers use nanoseconds and we need to convert ticks to nanoseconds, by
doing something like:
y = muldiv64(x, get_ticks_per_sec(), PCI_FREQUENCY)
where x is the number of device ticks and y the number of system ticks.
y is used as nanoseconds in timer functions,
it works because 1 tick is 1 nanosecond.
(get_ticks_per_sec() is 10^9)
But as PCI frequency is 33 MHz, we can also do:
y = x * 30; /* 33 MHz PCI period is 30 ns */
Which is much more simple.
This implies a 33.333333 MHz PCI frequency,
but this is correct.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Originally, timers were ticks based, and it made sense to
add ticks to current time to know when to trigger an alarm.
But since commit:
7447545 change all other clock references to use nanosecond resolution accessors
All timers use nanoseconds and we need to convert ticks to nanoseconds, by
doing something like:
y = muldiv64(x, get_ticks_per_sec(), PCI_FREQUENCY)
where x is the number of device ticks and y the number of system ticks.
y is used as nanoseconds in timer functions,
it works because 1 tick is 1 nanosecond.
(get_ticks_per_sec() is 10^9)
But as PCI frequency is 33 MHz, we can also do:
y = x * 30; /* 33 MHz PCI period is 30 ns */
Which is much more simple.
This implies a 33.333333 MHz PCI frequency,
but this is correct.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a new message, VHOST_USER_SET_VRING_ENABLE, to enable or disable
a specific virt queue, which is similar to attach/detach queue for
tap device.
virtio driver on guest doesn't have to use max virt queue pair, it
could enable any number of virt queue ranging from 1 to max virt
queue pair.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
This patch is initially based a patch from Nikolay Nikolaev.
This patch adds vhost-user multiple queue support, by creating a nc
and vhost_net pair for each queue.
Qemu exits if find that the backend can't support the number of requested
queues (by providing queues=# option). The max number is queried by a
new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol
feature VHOST_USER_PROTOCOL_F_MQ is present first.
The max queue check is done at vhost-user initiation stage. We initiate
one queue first, which, in the meantime, also gets the max_queues the
backend supports.
In older version, it was reported that some messages are sent more times
than necessary. Here we came an agreement with Michael that we could
categorize vhost user messages to 2 types: non-vring specific messages,
which should be sent only once, and vring specific messages, which should
be sent per queue.
Here I introduced a helper function vhost_user_one_time_request(), which
lists following messages as non-vring specific messages:
VHOST_USER_SET_OWNER
VHOST_USER_RESET_DEVICE
VHOST_USER_SET_MEM_TABLE
VHOST_USER_GET_QUEUE_NUM
For above messages, we simply ignore them when they are not sent the first
time.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
This is for querying how many queues the backend supports if it has mq
support(when VHOST_USER_PROTOCOL_F_MQ flag is set from the quried
protocol features).
vhost_net_get_max_queues() is the interface to export that value, and
to tell if the backend supports # of queues user requested, which is
done in the following patch.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Quote from Michael:
We really should rename VHOST_RESET_OWNER to VHOST_RESET_DEVICE.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Support a separate bitmask for vhost-user protocol features,
and messages to get/set protocol features.
Invoke them at init.
No features are defined yet.
[ leverage vhost_user_call for request handling -- Yuanhan Liu ]
Signed-off-by: Michael S. Tsirkin <address@hidden>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
After commit 019a3edbb2 ("virtio: make
features 64bit wide"). Device's guest_features was actually set after
vdc->load(). This breaks the assumption that device specific load()
function can check guest_features. For virtio-net, self announcement
and guest offloads won't work after migration.
Fixing this by defer them to virtio_net_load() where guest_features
were guaranteed to be set. Other virtio devices looks fine.
Fixes: 019a3edbb2
("virtio: make features 64bit wide")
Cc: qemu-stable@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Symptom:
$ qemu-system-x86_64 -m 10000000
Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456:
upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory
Aborted (core dumped)
Root cause: commit ef701d7 screwed up handling of out-of-memory
conditions. Before the commit, we report the error and exit(1), in
one place, ram_block_add(). The commit lifts the error handling up
the call chain some, to three places. Fine. Except it uses
&error_abort in these places, changing the behavior from exit(1) to
abort(), and thus undoing the work of commit 3922825 "exec: Don't
abort when we can't allocate guest memory".
The three places are:
* memory_region_init_ram()
Commit 4994653 (right after commit ef701d7) lifted the error
handling further, through memory_region_init_ram(), multiplying the
incorrect use of &error_abort. Later on, imitation of existing
(bad) code may have created more.
* memory_region_init_ram_ptr()
The &error_abort is still there.
* memory_region_init_rom_device()
Doesn't need fixing, because commit 33e0eb5 (soon after commit
ef701d7) lifted the error handling further, and in the process
changed it from &error_abort to passing it up the call chain.
Correct, because the callers are realize() methods.
Fix the error handling after memory_region_init_ram() with a
Coccinelle semantic patch:
@r@
expression mr, owner, name, size, err;
position p;
@@
memory_region_init_ram(mr, owner, name, size,
(
- &error_abort
+ &error_fatal
|
err@p
)
);
@script:python@
p << r.p;
@@
print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column)
When the last argument is &error_abort, it gets replaced by
&error_fatal. This is the fix.
If the last argument is anything else, its position is reported. This
lets us check the fix is complete. Four positions get reported:
* ram_backend_memory_alloc()
Error is passed up the call chain, ultimately through
user_creatable_complete(). As far as I can tell, it's callers all
handle the error sanely.
* fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize()
DeviceClass.realize() methods, errors handled sanely further up the
call chain.
We're good. Test case again behaves:
$ qemu-system-x86_64 -m 10000000
qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory
[Exit 1 ]
The next commits will repair the rest of commit ef701d7's damage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
The SOFT_RST or RXEN in the control register can be used as a condition
to unblock the net layer via can_receive(). So check for possible
flushes on RCR changes. This will drop all pending packets on soft
reset or disable which is the functional intent of the can_receive()
logic.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Message-id: b114d4c96f4afbdaa15f1361d9c07e3021755915.1441873621.git.crosthwaite.peter@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Return false from can_receive() when the FIFO doesn't have a free RX
slot. This fixes a bug in the current code where the allocated buffer
is freed before the fifo pop, triggering a premature flush of queued RX
packets. It also will handle a corner case, where the guest manually
frees the allocated buffer before popping the rx FIFO (hence it is not
enough to just delay the flush_queued_packets()).
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Message-id: 97bfdfc5cbce0bd5e0cbbbff35ce7a1bf6f8603d.1441873621.git.crosthwaite.peter@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Check that the core can once again receive packets before asking the
net layer to do a flush. This will make it more convenient to flush
packets when adding new conditions to can_receive.
Add missing if braces while moving the can_receive() core code.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Message-id: 92e15e12a6964274f4bc0eb71b61a7d94326f6c6.1441873621.git.crosthwaite.peter@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Ne2000 NIC uses ring buffer of NE2000_MEM_SIZE(49152)
bytes to process network packets. While receiving packets
via ne2000_receive() routine, a local 'index' variable
could exceed the ring buffer size, leading to an infinite
loop situation.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: P J P <pjp@fedoraproject.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Ne2000 NIC uses ring buffer of NE2000_MEM_SIZE(49152)
bytes to process network packets. While receiving packets
via ne2000_receive() routine, a local 'index' variable
could exceed the ring buffer size, which could lead to a
memory buffer overflow. Added other checks at initialisation.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: P J P <pjp@fedoraproject.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While processing transmit descriptors, it could lead to an infinite
loop if 'bytes' was to become zero; Add a check to avoid it.
[The guest can force 'bytes' to 0 by setting the hdr_len and mss
descriptor fields to 0.
--Stefan]
Signed-off-by: P J P <pjp@fedoraproject.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1441383666-6590-1-git-send-email-stefanha@redhat.com
