The documentation for PROT_MTE says that it cannot be cleared
by mprotect. Further, the implementation of the VM_ARCH_CLEAR bit,
contains PROT_BTI confiming that bit should be cleared.
Introduce PAGE_TARGET_STICKY to allow target/arch/cpu.h to control
which bits may be reset during page_set_flags. This is sort of the
opposite of VM_ARCH_CLEAR, but works better with qemu's PAGE_* bits
that are separate from PROT_* bits.
Reported-by: Vitaly Buka <vitalybuka@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220711031420.17820-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If low-address-protection is active, unaligned stores to non-protected
parts of lowcore lead to protection exceptions. The reason is that in
such cases tlb_fill() call in store_helper_unaligned() covers
[0, addr + size) range, which contains the protected portion of
lowcore. This range is too large.
The most straightforward fix would be to make sure we stay within the
original [addr, addr + size) range. However, if an unaligned access
affects a single page, we don't need to call tlb_fill() in
store_helper_unaligned() at all, since it would be identical to
the previous tlb_fill() call in store_helper(), and therefore a no-op.
If an unaligned access covers multiple pages, this situation does not
occur.
Therefore simply skip TLB handling in store_helper_unaligned() if we
are dealing with a single page.
Fixes: 2bcf018340 ("s390x/tcg: low-address protection support")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220711185640.3558813-2-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reorg TCG AccelOpsClass initialization to emphasis icount
mode share more code with single-threaded TCG.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323171751.78612-7-philippe.mathieu.daude@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
dump_opcount_info() is a one-line wrapper around tcg_dump_op_count()
which is also exported. So use the latter directly.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit 3a841ab53f 'qapi: introduce
x-query-jit QMP command' basically moved the only function using
dump_drift_info() to cpu-exec.c. Therefore, dump_drift_info() doesn't
need to be exported any longer.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We have about 30 instances of the typo/variant spelling 'writeable',
and over 500 of the more common 'writable'. Standardize on the
latter.
Change produced with:
sed -i -e 's/\([Ww][Rr][Ii][Tt]\)[Ee]\([Aa][Bb][Ll][Ee]\)/\1\2/g' $(git grep -il writeable)
and then hand-undoing the instance in linux-headers/linux/kvm.h.
Most of these changes are in comments or documentation; the
exceptions are:
* a local variable in accel/hvf/hvf-accel-ops.c
* a local variable in accel/kvm/kvm-all.c
* the PMCR_WRITABLE_MASK macro in target/arm/internals.h
* the EPT_VIOLATION_GPA_WRITABLE macro in target/i386/hvf/vmcs.h
(which is never used anywhere)
* the AR_TYPE_WRITABLE_MASK macro in target/i386/hvf/vmx.h
(which is never used anywhere)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20220505095015.2714666-1-peter.maydell@linaro.org
This patch decouples checkpoints and async events.
It was a tricky part of replay implementation. Now it becomes
much simpler and easier to maintain.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165364837856.688121.8785039478408995979.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
Coverity reports out-of-bound accesses within cputlb.c.
This should be a false positive due to how the index is
decoded from MemOpIdx. To be fair, nothing is checking
the correct bounds during encoding either.
Assert index in range before use, both to catch user errors
and to pacify static analysis.
Fixes: Coverity CID 1487120, 1487127, 1487170, 1487196, 1487215, 1487238
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401170813.318609-1-richard.henderson@linaro.org>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
The last use of this macro was removed in f3e182b100
("accel/tcg: Push trace info building into atomic_common.c.inc")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This header only defines the tcg_allowed variable and the tcg_enabled()
function - which are not required in many files that include this
header. Drop the #include statement there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220315144107.1012530-1-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses flush output immediately before or after qemu_log_unlock.
Instead of a separate call, move the flush into qemu_log_unlock.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>
Inside log_cpu_state, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-15-richard.henderson@linaro.org>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
Inside qemu_log, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.
Always check the result of qemu_log_trylock -- only checking
qemu_loglevel_mask races with the acquisition of the lock on
the logfile.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-10-richard.henderson@linaro.org>
This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.
To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
In the conversion to cpu_ld_*_mmu, the retaddr parameter
was corrupted in the one case of cpu_ldq_be_mmu.
Fixes: f83bcecb1 ("accel/tcg: Add cpu_{ld,st}*_mmu interfaces")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/902
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220315002506.152030-1-richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220305233415.64627-2-philippe.mathieu.daude@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-18-f4bug@amsat.org>
In some cases, cpu->exit_request can be false after handling the
interrupt, leading to another TB being executed instead of returning
to the main loop.
Fix this by returning true unconditionally when in single-step mode.
Fixes: ba3c35d9c4 ("tcg/cpu-exec: precise single-stepping after an interrupt")
Signed-off-by: Luc Michel <lmichel@kalray.eu>
Message-Id: <20220214132656.11397-1-lmichel@kalray.eu>
[rth: Unlock iothread mutex; simplify indentation]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The qemu_icache_linesize, qemu_icache_linesize_log,
qemu_dcache_linesize, and qemu_dcache_linesize_log variables are not
used in many files. Move them out of osdep.h to a new
qemu/cacheinfo.h, and document them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-5-peter.maydell@linaro.org
Fix host signal handling for sparc64-linux.
Speedups for jump cache and work list probing.
Fix for exception replays.
Raise guest SIGBUS for user-only misaligned accesses.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmIFu3QdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9tHwf+KFk9Pa9M+vhnHTZJ
ZvIRs9BaSzoDYqxLlHSKmXN3w3G5PbIcbHVHXTty2o28bT0jk05T9zQn3TzMfcbl
O+Yx8rygUJmbzlEQ+GaSI69pppFj8ahlS/ylfwd5MABZun2mawexEU9sqXqGCKR9
kJY8IpkZ6vqEDONcS1ZMQ+HFsNvw6LYBd567SY8g9ZsyPLWtQSqwdcuPqAJDFWCv
zNe6b07IRoFVOsbtQix9Dl/ntMxk5jto+UvdEVuW2FJOeRZJRshLWF5cGHNavSgQ
Culb5ALOzoxSlcZ4xfVfWtBGoFr/BNu9D0omTSmbosvXAd4HmPVxD6kV17wXV3+g
G/cvew==
=D+x7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20220211' into staging
Fix safe_syscall_base for sparc64.
Fix host signal handling for sparc64-linux.
Speedups for jump cache and work list probing.
Fix for exception replays.
Raise guest SIGBUS for user-only misaligned accesses.
# gpg: Signature made Fri 11 Feb 2022 01:27:16 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-tcg-20220211: (34 commits)
tests/tcg/multiarch: Add sigbus.c
tcg/sparc: Support unaligned access for user-only
tcg/sparc: Add tcg_out_jmpl_const for better tail calls
tcg/sparc: Use the constant pool for 64-bit constants
tcg/sparc: Convert patch_reloc to return bool
tcg/sparc: Improve code gen for shifted 32-bit constants
tcg/sparc: Add scratch argument to tcg_out_movi_int
tcg/sparc: Split out tcg_out_movi_imm32
tcg/sparc: Use tcg_out_movi_imm13 in tcg_out_addsub2_i64
tcg/mips: Support unaligned access for softmmu
tcg/mips: Support unaligned access for user-only
tcg/arm: Support raising sigbus for user-only
tcg/arm: Reserve a register for guest_base
tcg/arm: Support unaligned access for softmmu
tcg/arm: Check alignment for ldrd and strd
tcg/arm: Remove use_armv6_instructions
tcg/arm: Remove use_armv5t_instructions
tcg/arm: Drop support for armv4 and armv5 hosts
tcg/loongarch64: Support raising sigbus for user-only
tcg/tci: Support raising sigbus for user-only
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can't always guarantee we get to the end of a translator loop.
Although this can happen for a variety of reasons it does happen more
often on x86 system emulation when an instruction spans across to an
un-faulted page. This caused confusion of the instruction tracking
data resulting in apparent reverse execution (at least from the
plugins point of view).
Fix this by moving the reset code to plugin_gen_tb_start so we always
start with a clean slate.
We unconditionally reset tcg_ctx->plugin_insn as the
plugin_insn_append code uses this as a proxy for knowing if plugins
are enabled for the current instruction. Otherwise we can hit a race
where a previously instrumented thread leaves a stale value after the
main thread exits and disables instrumentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/824
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-27-alex.bennee@linaro.org>
If you really want to trace all memory operations TCG plugins gives
you a more flexible interface for doing so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220204204335.1689602-19-alex.bennee@linaro.org>
Commit aff0e204cb introduced CF_NOIRQ usage,
but one case was forgotten. Record/replay uses one special TB which is not
really executed, but used to cause a correct exception in replay mode.
This patch adds CF_NOIRQ flag for such block.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <164362834054.1754532.7678416881159817273.stgit@pasha-ThinkPad-X280>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the length of the range is large enough, clearing the whole cache is
faster than iterating over the (possibly extremely large) set of pages
contained in the range.
This mimics the pre-existing similar optimization done on the flush of the
tlb itself.
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Message-Id: <20220110164754.1066025-1-idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As --enable-profiler isn't defended in CI we missed this breakage.
Move the qmp handler into accel/tcg so we have access to the helpers
we need. While we are at it ensure we gate the feature on CONFIG_TCG.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 37087fde0e ("qapi: introduce x-query-profile QMP command")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/773
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220105135009.1584676-23-alex.bennee@linaro.org>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When we set cpu->cflags_next_tb it is because we want to carefully
control the execution of the next TB. Currently there is a race that
causes the second stage of watchpoint handling to get ignored if an
IRQ is processed before we finish executing the instruction that
triggers the watchpoint. Use the new CF_NOIRQ facility to avoid the
race.
We also suppress IRQs when handling precise self modifying code to
avoid unnecessary bouncing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/245
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211129140932.4115115-3-alex.bennee@linaro.org>
dlopen is never used after it is sought via cc.find_library, because
plugins use gmodule instead; remove the test.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211110092454.30916-1-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211115142915.3797652-5-alex.bennee@linaro.org>
A TCG vCPU doing a busy loop systematicaly hangs the QEMU monitor
if the user passes 'device_add' without argument. This is because
drain_cpu_all() which is called from qmp_device_add() cannot return
if readers don't exit read-side critical sections. That is typically
what busy-looping TCG vCPUs do:
int cpu_exec(CPUState *cpu)
{
[...]
rcu_read_lock();
[...]
while (!cpu_handle_exception(cpu, &ret)) {
// Busy loop keeps vCPU here
}
[...]
rcu_read_unlock();
return ret;
}
For MTTCG, have all vCPU threads register a force_rcu notifier that will
kick them out of the loop using async_run_on_cpu(). The notifier is called
with the rcu_registry_lock mutex held, using async_run_on_cpu() ensures
there are no deadlocks.
For RR, a single thread runs all vCPUs. Just register a single notifier
that kicks the current vCPU to the next one.
For MTTCG:
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
For RR:
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: 7bed89958b ("device_core: use drain_call_rcu in in qmp_device_add")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/650
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211109183523.47726-3-groug@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we make the assumption that the guest frontend loads all
op code bytes sequentially. This mostly holds up for regular fixed
encodings but some architectures like s390x like to re-read the
instruction which causes weirdness to occur. Rather than changing the
frontends make the plugin API a little more ergonomic and able to
handle the re-read case.
Stuff will still get strange if we read ahead of the opcode but so far
no front ends have done that and this patch asserts the case so we can
catch it early if they do.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211026102234.3961636-21-alex.bennee@linaro.org>
This is a counterpart to the HMP "info opcount" command. It is being
added with an "x-" prefix because this QMP command is intended as an
ad hoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info jit" command. It is being
added with an "x-" prefix because this QMP command is intended as an
ad hoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To be called from tcg generated code on hosts that support
unaligned accesses natively, in response to an access that
is supposed to be aligned.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the new cpu_loop_exit_sigbus for cpu_mmu_lookup.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the new cpu_loop_exit_sigbus for atomic_mmu_lookup, which
has access to complete alignment info from the TCGMemOpIdx arg.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a new interface to be provided by the os emulator for
raising SIGSEGV on fault. Use the new record_sigsegv target hook.
Reviewed by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Drop the *BSD code, to be re-created under bsd-user/ later.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Drop the *BSD code, to be re-created under bsd-user/ later.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
