IA32_PRED_CMD MSR gives software a way to issue commands that affect the state
of indirect branch predictors. Enumerated by CPUID.(EAX=7H,ECX=0):EDX[26].
IA32_ARCH_CAPABILITIES MSR enumerates architectural features of RDCL_NO and
IBRS_ALL. Enumerated by CPUID.(EAX=07H, ECX=0):EDX[29].
https://software.intel.com/sites/default/files/managed/c5/63/336996-Speculative-Execution-Side-Channel-Mitigations.pdf
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1530781798-183214-2-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
These insns require u=1; failed to include that in the switch
cases. This probably happened during one of the rebases just
before final commit.
Fixes: d17b7cdcf4
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were using the wrong flush-to-zero bit for the non-half input.
Fixes: 46d33d1e3c
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When FZ is set, input_denormal exceptions are recognized, but this does
not happen with FZ16. The softfloat code has no way to distinguish
these bits and will raise such exceptions into fp_status_f16.flags,
so ignore them when computing the accumulated flags.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When support for FZ16 was added, we failed to include the bit
within FPCR_MASK, which means that it could never be set.
Continue to zero FZ16 when ARMv8.2-FP16 is not enabled.
Fixes: d81ce0ef2c
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define a "cortex-m0" ARMv6-M CPU model.
Most of the register reset values set by other CPU models are not
relevant for the cut-down ARMv6-M architecture.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180814162739.11814-3-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows the default (and maximum) vector length to be set
from the command-line. Which is extraordinarily helpful in
debugging problems depending on vector length without having to
bake knowledge of PR_SET_SVE_VL into every guest binary.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also fold the FPCR/FPSR state onto the same line as PSTATE,
and mention but do not dump disabled FPU state.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With PC, there are 33 registers. Three per line lines up nicely
without overflowing 80 columns.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The scaling should be solely on the memory operation size; the number
of registers being loaded does not come in to the initial computation.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The immediate should be scaled by the size of the memory reference,
not the size of the elements into which it is loaded.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The expression (int) imm + (uint32_t) len_align turns into uint32_t
and thus with negative imm produces a memory operation at the wrong
offset. None of the numbers involved are particularly large, so
change everything to use int.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pseudocode for this operation is an increment + compare loop,
so comparing <= the maximum integer produces an all-true predicate.
Rather than bound in both the inline code and the helper, pass the
helper the number of predicate bits to set instead of the number
of predicate elements to set.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Used the wrong temporary in the computation of subtractive overflow.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The normal vector element is sign-extended before
comparing with the wide vector element.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180801123111.3595-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tailchaining is an optimization in handling of exception return
for M-profile cores: if we are about to pop the exception stack
for an exception return, but there is a pending exception which
is higher priority than the priority we are returning to, then
instead of unstacking and then immediately taking the exception
and stacking registers again, we can chain to the pending
exception without unstacking and stacking.
For v6M and v7M it is IMPDEF whether tailchaining happens for pending
exceptions; for v8M this is architecturally required. Implement it
in QEMU for all M-profile cores, since in practice v6M and v7M
hardware implementations generally do have it.
(We were already doing tailchaining for derived exceptions which
happened during exception return, like the validity checks and
stack access failures; these have always been required to be
tailchained for all versions of the architecture.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180720145647.8810-5-peter.maydell@linaro.org
On exception return for M-profile, we must restore the CONTROL.SPSEL
bit from the EXCRET value before we do any kind of tailchaining,
including for the derived exceptions on integrity check failures.
Otherwise we will give the guest an incorrect EXCRET.SPSEL value on
exception entry for the tailchained exception.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180720145647.8810-4-peter.maydell@linaro.org
In do_v7m_exception_exit(), we use the exc_secure variable to track
whether the exception we're returning from is secure or non-secure.
Unfortunately the statement initializing this was accidentally
inside an "if (env->v7m.exception != ARMV7M_EXCP_NMI)" conditional,
which meant that we were using the wrong value for NMI handlers.
Move the initialization out to the right place.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180720145647.8810-3-peter.maydell@linaro.org
Improve the exception-taken logging by logging in
v7m_exception_taken() the exception we're going to take
and whether it is secure/nonsecure.
This requires us to move logging at many callsites from after the
call to before it, so that the logging appears in a sensible order.
(This will make tail-chaining produce more useful logs; for the
current callers of v7m_exception_taken() we know which exception
we're going to take, so custom log messages at the callsite sufficed;
for tail-chaining only v7m_exception_taken() knows the exception
number that we're going to tail-chain to.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180720145647.8810-2-peter.maydell@linaro.org
One of the required effects of setting HCR_EL2.TGE is that when
SCR_EL3.NS is 1 then SCTLR_EL1.M must behave as if it is zero for
all purposes except direct reads. That is, it effectively disables
the MMU for the NS EL0/EL1 translation regime.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180724115950.17316-6-peter.maydell@linaro.org
The IMO, FMO and AMO bits in HCR_EL2 are defined to "behave as
1 for all purposes other than direct reads" if HCR_EL2.TGE
is set and HCR_EL2.E2H is 0, and to "behave as 0 for all
purposes other than direct reads" if HCR_EL2.TGE is set
and HRC_EL2.E2H is 1.
To avoid having to check E2H and TGE everywhere where we test IMO and
FMO, provide accessors arm_hcr_el2_imo(), arm_hcr_el2_fmo()and
arm_hcr_el2_amo(). We don't implement ARMv8.1-VHE yet, so the E2H
case will never be true, but we include the logic to save effort when
we eventually do get to that.
(Note that in several of these callsites the change doesn't
actually make a difference as either the callsite is handling
TGE specially anyway, or the CPU can't get into that situation
with TGE set; we change everywhere for consistency.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180724115950.17316-5-peter.maydell@linaro.org
Whene we raise a synchronous exception, if HCR_EL2.TGE is set then
exceptions targeting NS EL1 must be redirected to EL2. Implement
this in raise_exception() -- all synchronous exceptions go through
this function.
(Asynchronous exceptions go via arm_cpu_exec_interrupt(), which
already honours HCR_EL2.TGE when it determines the target EL
in arm_phys_excp_target_el().)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180724115950.17316-4-peter.maydell@linaro.org
Some debug registers can be trapped via MDCR_EL2 bits TDRA, TDOSA,
and TDA, which we implement in the functions access_tdra(),
access_tdosa() and access_tda(). If MDCR_EL2.TDE or HCR_EL2.TGE
are 1, the TDRA, TDOSA and TDA bits should behave as if they were 1.
Implement this by having the access functions check MDCR_EL2.TDE
and HCR_EL2.TGE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180724115950.17316-3-peter.maydell@linaro.org
If the "trap general exceptions" bit HCR_EL2.TGE is set, we
must mask all virtual interrupts (as per DDI0487C.a D1.14.3).
Implement this in arm_excp_unmasked().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180724115950.17316-2-peter.maydell@linaro.org
Now that we have full support for small regions, including execution,
we can remove the workarounds where we marked all small regions as
non-executable for the M-profile MPU and SAU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180710160013.26559-7-peter.maydell@linaro.org
Forbid stack alignment change. (CCR)
Reserve FAULTMASK, BASEPRI registers.
Report any fault as a HardFault. Disable MemManage, BusFault and
UsageFault, so they always escalated to HardFault. (SHCSR)
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180718095628.26442-1-jusual@mail.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MSR handling is the only place where CONTROL.nPRIV is modified.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-id: 20180705222622.17139-1-jusual@mail.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The instance_init function of the xtensa CPUs creates a memory region,
but does not set an owner, so the memory region is not destroyed
correctly when the CPU object is removed. This can happen when
introspecting the CPU devices, so introspecting the CPU device will
leave a dangling memory region object in the QOM tree. Make sure to
set the right owner here to fix this issue.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-id: 1532005320-17794-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the migration code incorrectly treats a subsection with
no .needed function pointer as if it was the subsection list
terminator -- it is ignored and so is everything after it.
Work around this by giving various M profile vmstate structs
a 'needed' function that always returns true.
We reuse m_needed() for this, since it's always true here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-4-peter.maydell@linaro.org
Since 86f0a186d6 the TYPE_ARM_HOST_CPU is only compiled when CONFIG_KVM
is enabled.
Remove the now redundant special-case introduced in a96c0514ab, to avoid:
$ qemu-system-aarch64 -machine virt -cpu \? | fgrep host
host
host (only available in KVM mode)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727132311.2777-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MSR_SMI_COUNT started being migrated in QEMU 2.12. Do not migrate it
on older machine types, or the subsection causes a load failure for
guests that use SMM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename DCACHE to DATA_CACHE and ICACHE to INSTRUCTION_CACHE.
This avoids conflict with Linux asm/cachectl.h macros and fixes
build failure on mips hosts.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180717194010.30096-1-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To correctly handle small (less than TARGET_PAGE_SIZE) MPU regions,
we must correctly handle the case where the address being looked
up hits in an MPU region that is not small but the address is
in the same page as a small region. For instance if MPU region
1 covers an entire page from 0x2000 to 0x2400 and MPU region
2 is small and covers only 0x2200 to 0x2280, then for an access
to 0x2000 we must not return a result covering the full page
even though we hit the page-sized region 1. Otherwise we will
then cache that result in the TLB and accesses that should
hit region 2 will incorrectly find the region 1 information.
Check for the case where we miss an MPU region but it is still
within the same page, and in that case narrow the size we will
pass to tlb_set_page_with_attrs() for whatever the final
outcome is of the MPU lookup.
Reported-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180716133302.25989-1-peter.maydell@linaro.org
Usually, when baselining two CPU models, whereby one of them has base
CPU features disabled (e.g. z14-base,msa=off), we fallback to an older
model that did not have these features in the base model. We always try to
create a "sane" CPU model (as far as possible), and one part of it is that
removing base features is no good and to be avoided.
Now, if we disable base features that were part of a z900, we're out of
luck. We won't find a CPU model and QEMU will segfault. This is a
scenario that should never happen in real life, but it can be used to
crash QEMU.
So let's properly report an error if we baseline e.g.:
{ "execute": "query-cpu-model-baseline",
"arguments" : { "modela": { "name": "z14-base", "props": {"esan3" : false}},
"modelb": { "name": "z14"}} }
Instead of segfaulting.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180718092330.19465-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
'I' was being double-incremented; correctly within the inner loop
and incorrectly within the outer loop.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180711103957.3040-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hyper-V identifies vCPUs by Virtual Processor (VP) index which can be
queried by the guest via HV_X64_MSR_VP_INDEX msr. It is defined by the
spec as a sequential number which can't exceed the maximum number of
vCPUs per VM.
It has to be owned by QEMU in order to preserve it across migration.
However, the initial implementation in KVM didn't allow to set this
msr, and KVM used its own notion of VP index. Fortunately, the way
vCPUs are created in QEMU/KVM makes it likely that the KVM value is
equal to QEMU cpu_index.
So choose cpu_index as the value for vp_index, and push that to KVM on
kernels that support setting the msr. On older ones that don't, query
the kernel value and assert that it's in sync with QEMU.
Besides, since handling errors from vCPU init at hotplug time is
impossible, disable vCPU hotplug.
This patch also introduces accessor functions to encapsulate the mapping
between a vCPU and its vp_index.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180702134156.13404-3-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In Hyper-V-related code, vCPUs are identified by their VP (virtual
processor) index. Since it's customary for "vcpu_id" in QEMU to mean
APIC id, rename the respective variables to "vp_index" to make the
distinction clear.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180702134156.13404-2-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds field with content of KERNEL_GS_BASE MSR to QEMU note in
ELF dump.
On Windows, if all vCPUs are running usermode tasks at the time the dump is
created, this can be helpful in the discovery of guest system structures
during conversion ELF dump to MEMORY.DMP dump.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Message-Id: <20180714123000.11326-1-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For M-profile exception returns, the mmu index to use for exception
return unstacking is supposed to be that of wherever we are returning to:
* if returning to handler mode, privileged
* if returning to thread mode, privileged or unprivileged depending on
CONTROL.nPRIV for the destination security state
We were passing the wrong thing as the 'priv' argument to
arm_v7m_mmu_idx_for_secstate_and_priv(). The effect was that guests
which programmed the MPU to behave differently for privileged and
unprivileged code could get spurious MemManage Unstack exceptions.
Reported-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180709124535.1116-1-peter.maydell@linaro.org
The translator loop does not allow the tb_start hook to set
dc->base.is_jmp; the only hook allowed to do that is translate_insn.
Split the work between init_disas_context where we validate
the gUSA parameters, and translate_insn where we emit code.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use MAKE_64BIT_MASK instead of open-coding. Remove an odd
vector size check that is unlikely to be more profitable
than 3 64-bit integer stores. Correct the iteration for WORD
to avoid writing too much data.
Fixes RISU tests of PTRUE for VL 256.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180705191929.30773-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These instructions must perform the sve_access_check, but
since they are implemented as NOPs there is no generated
code to elide when the access check fails.
Fixes: Coverity issues 1393780 & 1393779.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When I try to build a ppc64 target on a ppc64 host (gcc 8.1.1), I have:
.../target/ppc/int_helper.c: In function 'helper_vinsertb':
.../target/ppc/int_helper.c:1954:32: error: array subscript 18446744073709551608 is above array bounds of 'uint8_t[16]' {aka 'unsigned char[16]'} [-Werror=array-bounds]
memmove(&r->u8[index], &b->u8[8 - sizeof(r->element)], \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../target/ppc/int_helper.c:1965:1: note: in expansion of macro 'VINSERT'
If we compare with the macro for ppc64le, we can see
sizeof(r->element[0]) should be used instead of sizeof(r->element).
And VINSERT uses only u8, u16, u32 and u64, so the maximum value
of sizeof(r->element[0]) is 8
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit d6dcc5583e, '-cpu ?' shows the description of the
X86_CPU_TYPE_NAME("max") for the host CPU model:
Enables all features supported by the accelerator in the current host
instead of the expected:
KVM processor with all supported host features
or
HVF processor with all supported host features
This is caused by the early use of kvm_enabled() and hvf_enabled() in
a class_init function. Since the accelerator isn't configured yet, both
helpers return false unconditionally.
A QEMU binary will only be compiled with one of these accelerators, not
both. The appropriate description can thus be decided at build time.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <153055056654.212317.4697363278304826913.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mostly patches from Richard Henderson fixing multiple things:
* Fix singlestepping in GDB.
* Use more TB linking.
* Fixes to exit TB after updating SPRs to enable registering of state
changes.
* Significant optimizations and refactors to the TLB
* Split out disassembly from translation.
* Add qemu-or1k to qemu-binfmt-conf.sh.
* Implement signal handling for linux-user.
Then there are a few fixups from me:
* Fix delay slot detections to match hardware, this was masking a bug
in the linus kernel.
* Fix stores to the PIC mask register
-----BEGIN PGP SIGNATURE-----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=mbu2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/shorne/tags/pull-or-20180703' into staging
OpenRISC cleanups and Fixes for QEMU 3.0
Mostly patches from Richard Henderson fixing multiple things:
* Fix singlestepping in GDB.
* Use more TB linking.
* Fixes to exit TB after updating SPRs to enable registering of state
changes.
* Significant optimizations and refactors to the TLB
* Split out disassembly from translation.
* Add qemu-or1k to qemu-binfmt-conf.sh.
* Implement signal handling for linux-user.
Then there are a few fixups from me:
* Fix delay slot detections to match hardware, this was masking a bug
in the linus kernel.
* Fix stores to the PIC mask register
# gpg: Signature made Tue 03 Jul 2018 14:44:10 BST
# gpg: using RSA key C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* remotes/shorne/tags/pull-or-20180703: (25 commits)
target/openrisc: Fix writes to interrupt mask register
target/openrisc: Fix delay slot exception flag to match spec
linux-user: Fix struct sigaltstack for openrisc
linux-user: Implement signals for openrisc
target/openrisc: Add support in scripts/qemu-binfmt-conf.sh
target/openrisc: Reorg tlb lookup
target/openrisc: Increase the TLB size
target/openrisc: Stub out handle_mmu_fault for softmmu
target/openrisc: Use identical sizes for ITLB and DTLB
target/openrisc: Fix cpu_mmu_index
target/openrisc: Fix tlb flushing in mtspr
target/openrisc: Reduce tlb to a single dimension
target/openrisc: Merge mmu_helper.c into mmu.c
target/openrisc: Remove indirect function calls for mmu
target/openrisc: Merge tlb allocation into CPUOpenRISCState
target/openrisc: Form the spr index from tcg
target/openrisc: Exit the TB after l.mtspr
target/openrisc: Split out is_user
target/openrisc: Link more translation blocks
target/openrisc: Fix singlestep_enabled
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's a last minue pull request before today's soft freeze. Ideally
I would have sent this earlier, but I was waiting for a couple of
extra fixes I knew were close. And the freeze crept up on me, like
always.
Most of the changes here are bugfixes in any case. There are some
cleanups as well, which have been in my staging tree for a little
while. There are a couple of truly new features (some extensions to
the sam460ex platform), but these are low risk, since they only affect
a new and not really stabilized machine type anyway.
Higlights are:
* Mac platform improvements from Mark Cave-Ayland
* Sam460ex improvements from BALATON Zoltan et al.
* XICS interrupt handler cleanups from Cédric Le Goater
* TCG improvements for atomic loads and stores from Richard
Henderson
* Assorted other bugfixes
-----BEGIN PGP SIGNATURE-----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=AHrx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180703' into staging
ppc patch queue 2018-07-03
Here's a last minue pull request before today's soft freeze. Ideally
I would have sent this earlier, but I was waiting for a couple of
extra fixes I knew were close. And the freeze crept up on me, like
always.
Most of the changes here are bugfixes in any case. There are some
cleanups as well, which have been in my staging tree for a little
while. There are a couple of truly new features (some extensions to
the sam460ex platform), but these are low risk, since they only affect
a new and not really stabilized machine type anyway.
Higlights are:
* Mac platform improvements from Mark Cave-Ayland
* Sam460ex improvements from BALATON Zoltan et al.
* XICS interrupt handler cleanups from Cédric Le Goater
* TCG improvements for atomic loads and stores from Richard
Henderson
* Assorted other bugfixes
# gpg: Signature made Tue 03 Jul 2018 06:55:22 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.0-20180703: (35 commits)
ppc: Include vga cirrus card into the compiling process
target/ppc: Relax reserved bitmask of indexed store instructions
target/ppc: set is_jmp on ppc_tr_breakpoint_check
spapr: compute default value of "hpt-max-page-size" later
target/ppc/kvm: don't pass cpu to kvm_get_smmu_info()
target/ppc/kvm: get rid of kvm_get_fallback_smmu_info()
ppc440_uc: Basic emulation of PPC440 DMA controller
sam460ex: Add RTC device
hw/timer: Add basic M41T80 emulation
ppc4xx_i2c: Rewrite to model hardware more closely
hw/ppc: Give sam46ex its own config option
fpu_helper.c: fix setting FPSCR[FI] bit
target/ppc: Implement the rest of gen_st_atomic
target/ppc: Implement the rest of gen_ld_atomic
target/ppc: Use atomic min/max helpers
target/ppc: Use MO_ALIGN for EXIWX and ECOWX
target/ppc: Split out gen_st_atomic
target/ppc: Split out gen_ld_atomic
target/ppc: Split out gen_load_locked
target/ppc: Tidy gen_conditional_store
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/ppc/spapr.c
The interrupt controller mask register (PICMR) allows writing any value
to any of the 32 interrupt mask bits. Writing a 0 masks the interrupt
writing a 1 unmasks (enables) the the interrupt.
For some reason the old code was or'ing the write values to the PICMR
meaning it was not possible to ever mask a interrupt once it was
enabled.
I have tested this by running linux 4.18 and my regular checks, I don't
see any issues.
Reported-by: Davidson Francis <davidsondfgl@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The delay slot exception flag is only set on the SR register during
exception. Previously it was being set on both the ESR and SR this
caused QEMU to differ from the spec. The was apparent as the linux
kernel had a bug where it could boot on QEMU but not on real hardware.
The fixed logic now matches hardware.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
All of the existing code was boilerplate from elsewhere,
and would crash the guest upon the first signal.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
---
v2:
Add a comment to the new definition of target_pt_regs.
Install the signal mask into the ucontext.
v3:
Incorporate feedback from Laurent.
While openrisc has a split i/d tlb, qemu does not. Perform a
lookup on both i & d tlbs in parallel and put the composite
rights into qemu's tlb. This avoids ping-ponging the qemu tlb
between EXEC and READ.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The PPC440 User Manual says that if bit 31 is set, the contents of
CR[CR0] are undefined for indexed store instructions but this form is
not invalid. Other PPC variants confirming to recent ISA where this
bit may be reserved should ignore reserved bits and not raise invalid
instruction exception. In particular, MorphOS has an stwx instruction
with bit 31 set and fails to boot currently because of this. With this
patch it gets further.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The use of GDB breakpoints was broken by b0c2d52 ("target/ppc: convert
to TranslatorOps", 2018-02-16).
Fix it by setting is_jmp, so that we break from the translation loop
as originally intended.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In a future patch the machine code will need to retrieve the MMU
information from KVM during machine initialization before the CPUs
are created.
Actually, KVM_PPC_GET_SMMU_INFO is a VM class ioctl, and thus, we
don't need to have a CPU object around. We just need for KVM to
be initialized and use the kvm_state global. This patch just does
that.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we're checking our MMU configuration is supported by KVM,
rather than adjusting it to KVM, it doesn't really make sense to
have a fallback for kvm_get_smmu_info(). If KVM is too old or buggy
to provide the details, we should rather treat this as an error.
This patch thus adds error reporting to kvm_get_smmu_info() and get
rid of the fallback code. QEMU will now terminate if KVM fails to
provide MMU details. This may break some very old setups, but the
simplification is worth the sacrifice.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The FPSCR[FI] bit indicates if the last floating point instruction had a result that was rounded. Each consecutive floating point instruction is suppose to set this bit to the correct value. What currently happens is this bit is not set as often as it should be. I have verified that this is the behavior of a real PowerPC 950. This patch fixes that problem by deciding to set this bit after each floating point instruction.
https://www.pdfdrive.net/powerpc-microprocessor-family-the-programming-environments-for-32-e3087633.html
Page 63 in table 2-4 is where the description of this bit can be found.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The store twin case was stubbed out. For now, implement it only within
a serial context, forcing parallel execution to synchronize. It would
be possible to implement with a cmpxchg loop, if we care, but the loose
alignment requirements (simply no crossing 32-byte boundary) might send
us back to the serial context anyway.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These cases were stubbed out. For now, implement them only within
a serial context, forcing parallel execution to synchronize. It
would be possible to implement these with cmpxchg loops, if we care.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These operations were previously unimplemented for ppc.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This avoids the need for gen_check_align entirely.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the guts of ST_ATOMIC to a function. Use foo_tl for the operations
instead of foo_i32 or foo_i64 specifically. Use MO_ALIGN instead of an
explicit call to gen_check_align.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the guts of LD_ATOMIC to a function. Use foo_tl for the operations
instead of foo_i32 or foo_i64 specifically. Use MO_ALIGN instead of an
explicit call to gen_check_align.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Leave only the minimal amount of code within the LDAR macro,
moving the rest of the code into gen_load_locked. Use MO_ALIGN
and remove the explicit call to gen_check_align.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Leave only the minimal amount of code within the STCX macro,
moving the rest of the code into gen_conditional_store.
Remove the explicit call to gen_check_align; the matching LDAX will
have already checked alignment, and we verify the same address.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Always use the gen_conditional_store implementation that uses
atomic_cmpxchg. Make sure and clear reserve_addr across most
interrupts crossing the cpu_loop.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When running in a parallel context, we must use a helper in order
to perform the 128-bit atomic operation. When running in a serial
context, do the compare before the store.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Section 1.4 of the Power ISA v3.0B states that this insn is
single-copy atomic. As we cannot (yet) issue 128-bit stores
within TCG, use the generic helpers provided.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Section 1.4 of the Power ISA v3.0B states that both of these
instructions are single-copy atomic. As we cannot (yet) issue
128-bit loads within TCG, use the generic helpers provided.
Since TCG cannot (yet) return a 128-bit value, add a slot within
CPUPPCState for returning the high half of a 128-bit return value.
This solution is preferred to the helper assigning to architectural
registers directly, as it avoids clobbering all TCG live values.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows faults from MO_ALIGN to have the same effect
as from gen_check_align.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The architecture supports 128 TLB entries. There is no reason
not to provide all of them. In the process we need to fix a
bug that failed to parameterize the configuration register that
tells the operating system the number of entries.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
---
v2:
- Change VMState version.
This hook is only used by CONFIG_USER_ONLY.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The sizes are already the same, however, we can improve things
if they are identical by design.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The code in cpu_mmu_index does not properly honor SR_DME.
This bug has workarounds elsewhere in that we flush the
tlb more often than necessary, on the state changes that
should be reflected in a change of mmu_index.
Fixing this means that we can respect the mmu_index that
is given to tlb_flush.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The previous code was confused, avoiding the flush of the old entry
if the new entry is invalid. We need to flush the old page if the
old entry is valid and the new page if the new entry is valid.
This bug was masked by over-flushing elsewhere.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
While we had defines for *_WAYS, we didn't define more than 1.
Reduce the complexity by eliminating this unused dimension.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
With tlb_fill in mmu.c, we can simplify things further.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
There is no reason to use an indirect branch instead
of simply testing the SR bits that control mmu state.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
There is no reason to allocate this separately. This was probably
copied from target/mips which makes the same mistake.
While doing so, move tlb into the clear-on-reset range. While not
all of the TLB bits are guaranteed zero on reset, all of the valid
bits are cleared, and the rest of the bits are unspecified.
Therefore clearing the whole of the TLB is correct.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Rather than pass base+offset to the helper, pass the full index.
In most cases the base is r0 and optimization yields a constant.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
A store to SR changes interrupt state, which should return
to the main loop to recognize that state.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
This allows us to limit the amount of ifdefs and isolate
the test for usermode.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Track direct jumps via dc->jmp_pc_imm. Use that in
preference to jmp_pc when possible. Emit goto_tb in
that case, and lookup_and_goto_tb otherwise.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
We failed to store to cpu_pc before raising the exception,
which caused us to re-execute the same insn that we stepped.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
No need to use the interrupt mechanisms when we can
simply exit the tb directly.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
These values are unused.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Rather than emit disassembly while translating, reuse the
generated decoder to build a separate disassembler.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Correct the output of the "info mem" and "info tlb" monitor commands to
correctly show canonical addresses.
In 48-bit addressing mode, the upper 16 bits of linear addresses are
equal to bit 47. In 57-bit addressing mode (LA57), the upper 7 bits of
linear addresses are equal to bit 56.
Signed-off-by: Doug Gale <doug16k@gmail.com>
Message-Id: <20180617084025.29198-1-doug16k@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This implements NPT suport for SVM by hooking into
x86_cpu_handle_mmu_fault where it reads the stage-1 page table. Whether
we need to perform this 2nd stage translation, and how, is decided
during vmrun and stored in hflags2, along with nested_cr3 and
nested_pg_mode.
As get_hphys performs a direct cpu_vmexit in case of NPT faults, we need
retaddr in that function. To avoid changing the signature of
cpu_handle_mmu_fault, this passes the value from tlb_fill to get_hphys
via the CPU state.
This was tested successfully via the Jailhouse hypervisor.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <567473a0-6005-5843-4c73-951f476085ca@web.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20180625124238.25339-33-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Missing break when this feature was added in 89e71e873d
("target/openrisc: implement shadow registers"). This was causing
strange issues as we get writes into the translation block jump cache
and other bits of state.
Fixes: 89e71e873d ("target/openrisc: implement shadow registers")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Add support for Hyper-V TLB flush which recently got added to KVM.
Just like regular Hyper-V we announce HV_EX_PROCESSOR_MASKS_RECOMMENDED
regardless of how many vCPUs we have. Windows is 'smart' and uses less
expensive non-EX Hypercall whenever possible (when it wants to flush TLB
for all vCPUs or the maximum vCPU index in the vCPU set requires flushing
is less than 64).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20180610184927.19309-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
tcg_s390_tod_updated() is always called with the iothread being locked
(e.g. from S390TODClass->set() e.g. via HELPER(sck) or on incoming
migration). The helper we call takes the lock itself - bad.
Let's change that by factoring out updating the ckc timer. This now looks
much nicer than having to call a helper from another function.
While touching it we also make sure that env->ckc is updated even if the
new value is -1ULL, for now it would not have been modified in that case.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180629170520.13671-1-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's do this for completeness reason, although we don't support e.g.
PCDIMM/NVDIMM, which would use the alignment for placing the memory
region in guest physical memory. But maybe someday we would want to
support something like this - then we don't forget about this if
allowing multiple allocations in legacy_s390_alloc().
Use the same alignment as we would set in qemu_anon_ram_alloc(). Our
fixed address satisfies this alignment (1MB). This implicitly sets the
alignment of the underlying memory region.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180628113817.30814-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We always allocate at a fixed address, a second allocation can therefore
of course never work. We would simply overwrite mappings.
This can e.g. happen in s390_memory_init(), if trying to allocate more
than > 8TB. Let's just bail out, as there is no need for supporting it
(legacy handling for z/VM).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180628113817.30814-2-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
run_on_cpu() doesn't seem to work reliably until the CPU has been fully
created if the single-threaded TCG main loop is already running.
Therefore, hotplugging a CPU under single-threaded TCG does currently
not work. We should use the direct call instead of going via
run_on_cpu().
So let's use run_on_cpu() for KVM only - KVM requires it due to the initial
CPU reset ioctl. As a nice side effect, we get rid of the ifdef.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If the CPU data is migrated after the TOD clock, the CKC timer of a CPU
is not rearmed. Let's rearm it when loading the CPU state.
Introduce tcg-stub.c just like kvm-stub.c for tcg specific stubs.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This allows a guest to change its TOD. We already take care of updating
all CKC timers from within S390TODClass.
Use MO_ALIGN to load the operand manually - this will properly trigger a
SPECIFICATION exception.
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's stop the timer and delete any pending CKC IRQ before doing
anything else.
While at it, add a comment why the check for ckc == -1ULL is needed.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Right now, each CPU has its own TOD. Especially, the TOD will differ
based on creation time of a CPU - e.g. when hotplugging a CPU the times
will differ quite a lot, resulting in stall warnings in the guest.
Let's use a single TOD by implementing our new TOD device. Prepare it
for TOD-clock epoch extension.
Most importantly, whenever we set the TOD, we have to update the CKC
timer.
Introduce "tcg_s390x.h" just like "kvm_s390x.h" for tcg specific
function declarations that should not go into cpu.h.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Never set to anything but 0.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's treat this like a separate device. TCG will have to store the
actual state/time later on.
Include cpu-qom.h in kvm_s390x.h (due to S390CPU) to compile tod-kvm.c.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We are going to factor out the TOD into a separate device and use const
pointers for device class functions where possible. We are passing right
now ordinary pointers that should never be touched when setting the TOD.
Let's just pass the values directly.
Note that s390_set_clock() will be removed in a follow-on patch and
therefore its calling convention is not changed.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Big values for the TOD/ns clock can result in some overflows that can be
avoided. Not all overflows can be handled however, as the conversion either
multiplies by 4.096 or divided by 4.096.
Apply the trick used in the Linux kernel in arch/s390/include/asm/timex.h
for tod_to_ns() and use the same trick also for the conversion in the
other direction.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Most systems and host kernels provide the necessary building blocks for
bpb and ppa15. We can reverse the logic and default enable those
features, while still allowing to disable it via cpu model.
So let us add bpb and ppa15 to z196 and later default CPU model for the
qemu 3.0 machine. (like -cpu z13). Older machine types (e.g.
s390-ccw-virtio-2.12) will retain the old value and not provide those
bits in the default model.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180626123830.18282-1-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The rom_ptr() function allows direct access to the ROM blobs that we
load during startup. However, there are currently no checks for the
size of the accesses, so it's currently possible to crash QEMU for
example with:
$ echo "Insane in the mainframe" > /tmp/test.txt
$ s390x-softmmu/qemu-system-s390x -kernel /tmp/test.txt -append xyz
Segmentation fault (core dumped)
$ s390x-softmmu/qemu-system-s390x -kernel /tmp/test.txt -initrd /tmp/test.txt
Segmentation fault (core dumped)
$ echo -n HdrS > /tmp/hdr.txt
$ sparc64-softmmu/qemu-system-sparc64 -kernel /tmp/hdr.txt -initrd /tmp/hdr.txt
Segmentation fault (core dumped)
We need a possibility to check the size of the ROM area that we want
to access, thus let's add a size parameter to the rom_ptr() function
to avoid these problems.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1530005740-25254-1-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The xtensa frontend calls get_page_addr_code() from its
itlb_hit_test helper function. This function is really part
of the TCG core's internals, and calling it from a target
helper makes it awkward to make changes to that core code.
It also means that we don't pass the correct retaddr to
tlb_fill(), so we won't correctly handle the case where
an exception is generated.
The helper is used for the instructions IHI, IHU and IPFL.
Change it to call cpu_ldb_code_ra() instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will reduce the size of the patch in the next patch,
where the context will have to be a pointer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The usage of DISAS_UPDATE is after noreturn helpers.
It is thus indistinguishable from DISAS_NORETURN.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
ISA book documents that the first instruction of zero overhead loop
must fit completely into naturally aligned region of an instruction
fetch unit size. Check that condition and log a message if it's
violated.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This register was added to aa32 state by ARMv8.2.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no need to re-set these 3 features already
implied by the call to aarch64_a15_initfn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no need to re-set these 9 features already
implied by the call to aarch64_a57_initfn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Leave ARM_CP_SVE, removing ARM_CP_FPU; the sve_access_check
produced by the flag already includes fp_access_check. If
we also check ARM_CP_FPU the double fp_access_check asserts.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180629001538.11415-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already check for the same condition within the normal integer
sdiv and sdiv64 helpers. Use a slightly different formation that
does not require deducing the expression type.
Fixes: f97cfd596e
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180629001538.11415-2-richard.henderson@linaro.org
[PMM: reworded a comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This makes it match its AArch64 equivalent, PMINTENSET_EL1
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Message-id: 1529699547-17044-13-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
KVM implies V7VE, which implies ARM_DIV and THUMB_DIV. The conditional
detection here is therefore unnecessary. Because V7VE is already
unconditionally specified for all KVM hosts, ARM_DIV and THUMB_DIV are
already indirectly specified and do not need to be included here at all.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Message-id: 1529699547-17044-6-git-send-email-alindsay@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since kernel commit a86bd139f2 (arm64: arch_timer: Enable CNTVCT_EL0
trap..), released in kernel version v4.12, user-space has been able
to read these system registers. As we can't use QEMUTimer's in
linux-user mode we just directly call cpu_get_clock().
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180625160009.17437-2-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We've already added the helpers with an SVE patch, all that remains
is to wire up the aa64 and aa32 translators. Enable the feature
within -cpu max for CONFIG_USER_ONLY.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable ARM_FEATURE_SVE for the generic "max" cpu.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180627043328.11531-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-33-richard.henderson@linaro.org
[PMM: moved 'ra=%reg_movprfx' here from following patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enhance the existing helpers to support SVE, which takes the
index from each 128-bit segment. The change has no effect
for AdvSIMD, since there is only one such segment.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180627043328.11531-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For aa64 advsimd, we had been passing the pre-indexed vector.
However, sve applies the index to each 128-bit segment, so we
need to pass in the index separately.
For aa32 advsimd, the fp32 operation always has index 0, but
we failed to interpret the fp16 index correctly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180627043328.11531-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180627043328.11531-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Robert Hoo
Richard Henderson
Stefan Hajnoczi
Peter Maydell
Julia Suvorova
Thomas Huth
Philippe Mathieu-Daudé
Paolo Bonzini
Eduardo Habkost
David Hildenbrand
Roman Kagan
Viktor Prutyanov
Laurent Vivier
Greg Kurz
Stafford Horne
BALATON Zoltan
Emilio G. Cota
John Arbuckle
Doug Gale
Jan Kiszka
Vitaly Kuznetsov
Christian Borntraeger
Max Filippov
Aaron Lindsay
Alex Bennée