Since kvmppc_xive_get_queue_config() has a return value, convert
kvmppc_xive_get_queues() to use it for error checking. This allows
to get rid of the local_err boiler plate.
Propagate the return value so that callers may use it as well to check
failures.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707848069.1489912.14879208798696134531.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since kvm_device_access() returns a negative errno on failure, convert
kvmppc_xive_get_queue_config() and kvmppc_xive_set_queue_config() to
use it for error checking. This allows to get rid of the local_err
boilerplate.
Propagate the return value so that callers may use it as well to check
failures.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707847357.1489912.2032291280645236480.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
kvm_set_one_reg() returns a negative errno on failure, use that instead
of errno. Also propagate it to callers so they can use it to check
for failures and hopefully get rid of their local_err boilerplate.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707846665.1489912.14267225652103441921.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Callers currently check failures of kvmppc_xive_mmap() through the
@errp argument, which isn't a recommanded practice. It is preferred
to use a return value when possible.
Since NULL isn't an invalid address in theory, it seems better to
return MAP_FAILED and to teach callers to handle it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707845972.1489912.719896767746375765.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since kvmppc_xive_source_reset_one() has a return value, convert
kvmppc_xive_source_reset() to use it for error checking. This
allows to get rid of the local_err boiler plate.
Propagate the return value so that callers may use it as well to check
failures.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707845245.1489912.9151822670764690034.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use error_setg_errno() instead of error_setg(strerror()). While here,
use -ret instead of errno since kvm_vcpu_enable_cap() returns a negative
errno on failure.
Use ERRP_GUARD() to ensure that errp can be passed to error_append_hint(),
and get rid of the local_err boilerplate.
Propagate the return value so that callers may use it as well to check
failures.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707844549.1489912.4862921680328017645.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The spapr_phb_realize() function has a local_err variable which
is used to:
1) check failures of spapr_irq_findone() and spapr_irq_claim()
2) prepend extra information to the error message
Recent work from Markus Armbruster highlighted we get better
code when testing the return value of a function, rather than
setting up all the local_err boiler plate. For similar reasons,
it is now preferred to use ERRP_GUARD() and error_prepend()
rather than error_propagate_prepend().
Since spapr_irq_findone() and spapr_irq_claim() return negative
values in case of failure, do both changes.
This is just cleanup, no functional impact.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <159707843851.1489912.6108405733810934642.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All callers guard these functions with an xive_in_kernel() helper. Make
it clear that they are only to be called when the KVM XIVE device exists.
Note that the check on xive is dropped in kvmppc_xive_disconnect(). It
really cannot be NULL since it comes from set_active_intc() which only
passes pointers to allocated objects.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <159679994169.876294.11026653581505077112.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Calls to the KVM XIVE device are guarded by kvm_irqchip_in_kernel(). This
ensures that QEMU won't try to use the device if KVM is disabled or if
an in-kernel irqchip isn't required.
When using ic-mode=dual with the pseries machine, we have two possible
interrupt controllers: XIVE and XICS. The kvm_irqchip_in_kernel() helper
will return true as soon as any of the KVM device is created. It might
lure QEMU to think that the other one is also around, while it is not.
This is exactly what happens with ic-mode=dual at machine init when
claiming IRQ numbers, which must be done on all possible IRQ backends,
eg. RTAS event sources or the PHB0 LSI table : only the KVM XICS device
is active but we end up calling kvmppc_xive_source_reset_one() anyway,
which fails. This doesn't cause any trouble because of another bug :
kvmppc_xive_source_reset_one() lacks an error_setg() and callers don't
see the failure.
Most of the other kvmppc_xive_* functions have similar xive->fd
checks to filter out the case when KVM XIVE isn't active. It
might look safer to have idempotent functions but it doesn't
really help to understand what's going on when debugging.
Since we already have all the kvm_irqchip_in_kernel() in place,
also have the callers to check xive->fd as well before calling
KVM XIVE specific code. This is straight-forward for the spapr
specific XIVE code. Some more care is needed for the platform
agnostic XIVE code since it cannot access xive->fd directly.
Introduce new in_kernel() methods in some base XIVE classes
for this purpose and implement them only in spapr.
In all cases, we still need to call kvm_irqchip_in_kernel() so that
compilers can optimize the kvmppc_xive_* calls away when CONFIG_KVM
isn't defined, thus avoiding the need for stubs.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159679993438.876294.7285654331498605426.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Depending on whether XIVE is emultated or backed with a KVM XIVE device,
the ESB MMIOs of a XIVE source point to an I/O memory region or a mapped
memory region.
This is currently handled by checking kvm_irqchip_in_kernel() returns
false in xive_source_realize(). This is a bit awkward as we usually
need to do extra things when we're using the in-kernel backend, not
less. But most important, we can do better: turn the existing "xive.esb"
memory region into a plain container, introduce an "xive.esb-emulated"
I/O subregion and rename the existing "xive.esb" subregion in the KVM
code to "xive.esb-kvm". Since "xive.esb-kvm" is added with overlap
and a higher priority, it prevails over "xive.esb-emulated" (ie.
a guest using KVM XIVE will interact with "xive.esb-kvm" instead of
the default "xive.esb-emulated" region.
While here, consolidate the computation of the MMIO region size in
a common helper.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159679992680.876294.7520540158586170894.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently if option '-icount auto' is passed to the QEMU TCG to enable
counting instructions the VM crashes with the following error report when
Linux runs on it:
qemu-system-ppc64: Bad icount read
This happens because read/write access to the SPRs PURR, VTB, and TBU40
is not integrated to the icount framework.
This commit fixes that issue by making the read/write access of these
SPRs aware of icount framework, adding the proper gen_io_start() calls
before calling the helpers to load/store these SPRs in TCG and ensuring
that the associated TBs end immediately after, accordingly to what's in
docs/devel/tcg-icount.rst.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Message-Id: <20200811153235.4527-1-gromero@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since this function begins with:
/* The KVM XIVE device is not in use */
if (!xive || xive->fd == -1) {
return;
}
we obviously don't need to check xive->fd again.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159673297296.766512.14780055521619233656.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If the creation of the KVM XIVE device fails for some reasons, the
negative errno ends up in xive->fd, but the rest of the code assumes
that xive->fd either contains an open fd, ie. positive value, or -1.
This doesn't cause any misbehavior except kvmppc_xive_disconnect()
that will try to close(xive->fd) during rollback and likely be
rewarded with an EBADF.
Only set xive->fd with a open fd.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159673296585.766512.15404407281299745442.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When starting an L2 KVM guest with `ic-mode=dual,kernel-irqchip=on`,
QEMU fails with:
KVM is too old to support ic-mode=dual,kernel-irqchip=on
This error message was introduced to detect older KVM versions that
didn't allow destruction and re-creation of the XICS KVM device that
we do at reboot. But it is actually the same issue that we get with
nested guests : when running under pseries, KVM currently provides
a genuine XICS device (not the XICS-on-XIVE device that we get
under powernv) which doesn't support destruction/re-creation.
This will eventually be fixed in KVM but in the meantime, update
the error message and documentation to mention the nested case.
While here, mention that in "No XIVE support in KVM" section that
this can also happen with "guest OSes supporting XIVE" since
we check this at init time before starting the guest.
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1890290
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159664243614.622889.18307368735989783528.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is not yet supported.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200804131639.407049-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a new documentation file, ppc-spapr-numa.rst,
informing what developers and user can expect of the NUMA distance
support for the pseries machine, up to QEMU 5.1.
In the (hopefully soon) future, when we rework the NUMA mechanics
of the pseries machine to at least attempt to contemplate user
choice, this doc will be extended to inform about the new
support.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200803133440.825276-1-danielhb413@gmail.com>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When emulating certain floating point instructions or vector instructions on
PowerPC machines, QEMU did not properly generate the SPE/Embedded Floating-
Point Unavailable interrupt. See the buglink further below for references to
the relevant NXP documentation.
This patch fixes the behavior of some evfs* instructions that were
incorrectly emitting the interrupt.
More importantly, this patch fixes the behavior of several efd* and ev*
instructions that were not generating the interrupt. Triggering the
interrupt for these instructions fixes lazy FPU/vector context switching on
some operating systems like Linux.
Without this patch, the result of some double-precision arithmetic could be
corrupted due to the lack of proper saving and restoring of the upper
32-bit part of the general-purpose registers.
Buglink: https://bugs.launchpad.net/qemu/+bug/1888918
Buglink: https://bugs.launchpad.net/qemu/+bug/1611394
Signed-off-by: Matthieu Bucchianeri <matthieu.bucchianeri@leostella.com>
Message-Id: <20200727175553.32276-1-matthieu.bucchianeri@leostella.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
vmulhsd: Vector Multiply High Signed Doubleword
vmulhud: Vector Multiply High Unsigned Doubleword
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Message-Id: <20200724045845.89976-5-ljp@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
vmulhsw: Vector Multiply High Signed Word
vmulhuw: Vector Multiply High Unsigned Word
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Message-Id: <20200724045845.89976-4-ljp@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Group vmuluwm and vmulld. Make vmulld-specific
changes since it belongs to new ISA 3.1.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Message-Id: <20200724045845.89976-3-ljp@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add PPC2_FEATURE2_ARCH_3_10 to the PowerPC AT_HWCAP2 definitions.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Message-Id: <20200724045845.89976-2-ljp@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fix some typos in comments about code modeling coalescing points in the
XIVE routing engine (IVRE).
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Message-Id: <1595461434-27725-1-git-send-email-gromero@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Nested KVM HV only works if the kernel is using the radix MMU mode, ie.
the CPU is POWER9 and it is not running in some pre-power9 compat mode.
Otherwise, the KVM HV module fails to load in the guest with -ENODEV.
It might be painful for a user to discover this late that nested cannot
work with their setup. Erroring out at machine init instead seems to be
the best we can do.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <159491948127.188975.9621435875869177751.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We have a dedicated error API for hints. Use it instead of embedding
the hint in the error message, as recommanded in the "qapi/error.h"
header file.
While here, have cap_fwnmi_apply(), which already uses
error_append_hint(), to call ERRP_GUARD() as well.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <159594297421.8262.14314530897345809924.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When testing large LMB sizes (eg 4GB), I found a couple of places
that assume they are 32bit in size.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20200715004228.1262681-1-anton@ozlabs.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert the original implementation of vmuluwm to the more generic
tcg_gen_gvec_mul.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Message-Id: <20200701234344.91843-5-ljp@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER ISA 3.1 introduces following byte-reverse instructions:
brd: Byte-Reverse Doubleword X-form
brw: Byte-Reverse Word X-form
brh: Byte-Reverse Halfword X-form
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Message-Id: <20200701234344.91843-4-ljp@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch enables the Power ISA 3.1 in QEMU.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Message-Id: <20200701234344.91843-3-ljp@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This flag will be used for Power10 instructions.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Message-Id: <20200701234344.91843-2-ljp@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix double-call to tcg_temp_new_i64(), where a temp is allocated both at
declaration time and further down the implementation of gen_evmwsmiaa().
Note that gen_evmwsmia() and gen_evmwsmiaa() are still not implemented
correctly, as they invoke gen_evmwsmi() which may return early, but the
return is not propagated. This will be fixed in my patch for bug #1888918.
Signed-off-by: Matthieu Bucchianeri <matthieu.bucchianeri@leostella.com>
Message-Id: <20200727172114.31415-1-matthieu.bucchianeri@leostella.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a coprocessor instruction in an AArch32 guest traps to AArch32
Hyp mode, the syndrome register (HSR) includes Rt and Rt2 fields
which are simply copies of the Rt and Rt2 fields from the trapped
instruction. However, if the instruction is trapped from AArch32 to
an AArch64 higher exception level, the Rt and Rt2 fields in the
syndrome register (ESR_ELx) must be the AArch64 view of the register.
This makes a difference if the AArch32 guest was in a mode other than
User or System and it was using r13 or r14, or if it was in FIQ mode
and using r8-r14.
We don't know at translate time which AArch32 CPU mode we are in, so
we leave the values we generate in our prototype syndrome register
value at translate time as the raw Rt/Rt2 from the instruction, and
instead correct them to the AArch64 view when we find we need to take
an exception from AArch32 to AArch64 with one of these syndrome
values.
Fixes: https://bugs.launchpad.net/qemu/+bug/1879587
Reported-by: Julien Freche <julien@bedrocksystems.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200804193903.31240-1-peter.maydell@linaro.org
When calculating the offset, the result of left shift operation will be promoted
to type int64 automatically because the left operand of + operator is uint64_t.
but the result after integer promotion may be produce an error value for us and
trigger the following asserting error.
For example, consider i=0x2000, cluster_bits=18, the result of left shift
operation will be 0x80000000. Cause argument i is of signed integer type,
the result is automatically promoted to 0xffffffff80000000 which is not
we expected
The way to trigger the assertion error:
qemu-img create -f qcow2 -o preallocation=full,cluster_size=256k tmpdisk 10G
This patch fix it by casting @i to uint64_t before doing left shift operation
Signed-off-by: Guoyi Tu <tu.guoyi@h3c.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 81ba90fe0c014f269621c283269b42ad@h3c.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
libqemustub.a has been removed in commit ebedb37c8d ("Makefile: Remove
libqemustub.a"). Some remainders have been missed. Remove them now.
Message-Id: <20200804170055.2851-8-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code currently fails to compile on 32-bit big endian hosts:
target/riscv/vector_helper.c: In function 'vext_clear':
target/riscv/vector_helper.c:154:16: error: cast to pointer from integer
of different size [-Werror=int-to-pointer-cast]
memset((void *)((uintptr_t)tail & ~(7ULL)), 0, part1);
^
target/riscv/vector_helper.c:155:16: error: cast to pointer from integer
of different size [-Werror=int-to-pointer-cast]
memset((void *)(((uintptr_t)tail + 8) & ~(7ULL)), 0, part2);
^
cc1: all warnings being treated as errors
We should not use "long long" (i.e. 64-bit) values here to avoid the
problem. Switch to our QEMU_ALIGN_PTR_DOWN/UP macros instead.
Fixes: 751538d5da ("add vector stride load and store instructions")
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200804170055.2851-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In commit 6957fd98dc ("gitlab: add avocado asset caching") we
tried to save the Avocado cache (as in commit c1073e44b4 with
Travis-CI) however it doesn't work as expected. For some reason
Avocado uses /root/avocado_cache/ which we can not select later.
Manually generate a Avocado config to force the use of the
current job's directory.
This patch is based on an earlier version from Philippe Mathieu-Daudé.
Message-Id: <20200730141326.8260-5-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We were missing the two new targets avr-softmmu and rx-softmmu in the
gitlab-CI so far, and did not add some of the "other endianess" targets
like sh4eb-softmmu yet.
Since the current build-system-* jobs run already for a very long time,
let's do not add these missing targets there, but introduce two new
additional build jobs, one running with Debian and one running with
CentOS, and add the new targets there. Also move some targets from
the old build-system-* jobs to these new targets, to distribute the
load and reduce the runtime of the CI.
Message-Id: <20200730141326.8260-4-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These tests always time out on Gitlab, not sure what's happening here.
Let's disable them until somebody has enough spare time to debug the
issues.
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200730141326.8260-3-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Without python3-venv, I get the following message when trying to
run the acceptance tests within the debian container:
The virtual environment was not created successfully because ensurepip is not
available. On Debian/Ubuntu systems, you need to install the python3-venv
package using the following command.
apt-get install python3-venv
You may need to use sudo with that command. After installing the python3-venv
package, recreate your virtual environment.
Let's do it as the message suggests.
And while we're at it, also add netcat here since it is required for
some of the acceptance tests.
Message-Id: <20200730141326.8260-2-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This likely affects other, less popular host architectures as well.
Less common host architectures under linux get QEMU_VMALLOC_ALIGN (from
which VIRTIO_MEM_MIN_BLOCK_SIZE is derived) define to a variable of
type uintptr, which isn't compatible with the format specifier used to
print a user message. Since this particular usage of the underlying data
seems unique to this file, the simple fix is to just cast
QEMU_VMALLOC_ALIGN to uint32_t, which corresponds to the format specifier
used.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-Id: <20200730130519.168475-1-brogers@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
These instructions use zero as the discriminator, not SP.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Message-id: 20200804002849.30268-1-pcc@google.com
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When support for this feature went in, the update to the
documentation was forgotten.
Fixes: 067e8b0f45
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200803205708.315829-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CONFIG_XEN is generated by configure and stored in "config-target.h",
which is (obviously) only include for target-specific objects.
This is a problem for target-agnostic objects as CONFIG_XEN is never
defined and xen_enabled() is always inlined as 'false'.
Fix by following the KVM schema, defining CONFIG_XEN_IS_POSSIBLE
when we don't know to force the call of the non-inlined function,
returning the xen_allowed boolean.
Fixes: da278d58a0 ("accel: Move Xen accelerator code under accel/xen/")
Reported-by: Paul Durrant <pdurrant@amazon.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200804074930.13104-2-philmd@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Version: GnuPG v1
iQEcBAABAgAGBQJfKPzsAAoJEO8Ells5jWIRT4sIAKTPaDXkQDXsmM7iQOcj9sn6
rDvoGdKUb+BfTSCv8sietApiOLWVoDqsCmR6TH8HyaJIrlncu/8tRUMIRTTTaLx+
P+fP2kV546j4R/gt0WU/S8c3YOQgN2skUK8/Xy/ePPzUZ/Ya6XXfI6IPBB+YcsUd
COmiOHPehnS7EqVxGVDXr+G3iAZLkUZ1KrQZI5Kgd96HRPzrqDzNri7CzOFLrTpO
CJGr1N+j+g8frcsOjFjoI9JqjmtB6xjvUGkbyQFryvYxNp5z+mJGM8DQFg61qDdE
ROuuBRtMkEjlWDsz349S74czNpNYKzBLgeyIGTvahXIqnVBguHks6DKB8umeK20=
=9r05
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 04 Aug 2020 07:15:08 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
hw/net/net_tx_pkt: fix assertion failure in net_tx_pkt_add_raw_fragment()
colo-compare: Remove superfluous NULL-pointer checks for s->iothread
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
