Add GPIO in for the stellaris board which calls
qemu_system_reset_request() on reset request.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change armv7m_init to return the DeviceState* for the NVIC.
This allows access to all GPIO blocks, not just the IRQ inputs.
Move qdev_get_gpio_in() calls out of armv7m_init() into
board code for stellaris and stm32f205 boards.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a Linux-specific pre-boot routine that matches the device-
specific bootloaders behaviour. This is needed for modern Linux that
expects the ARM PLL in SLCR to be a more even value (not 26).
Cc: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 9a9025ea65572586b50dca4e5819032e3c436d64.1446182614.git.crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an API for boards to inject their own preboot software (or
firmware) sequence.
The software then returns to the bootloader via the link register. This
allows boards to do their own little bits of firmware setup without
needed to replace the bootloader completely (which is the requirement
for existing firmware support).
The blob is loaded by a callback if and only if doing a linux boot
(similar to the existing write_secondary support).
Rewrite the comment for the primary boot blob.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 070295644c6ac84696d743913296e8cfefb48c15.1446182614.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These comments start immediately after the current longest name in the
list. Tab them out to the next tab stop to give a little breathing room
and prepare for FIXUP_BOARD_SETUP which will require more indent.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: b9b9bb8f1c307c1ef8a3f26ff1f34fabb34b332e.1446182614.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add two SYSBUS_SDHCI devices for xlnx-zynqmp
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We should always go through VirtBoardInfo when we need the memmap.
To avoid using a15memmap directly, in this case, we need to defer
the max-cpus check from class init time to instance init time. In
class init we now use MAX_CPUMASK_BITS for max_cpus initialization,
which is the maximum QEMU supports, and also, incidentally, the
maximum KVM/gicv3 currently supports. Also, a nice side-effect of
delaying the max-cpus check is that we now get more appropriate
error messages for gicv2 machines that try to configure more than
123 cpus. Before this patch it would complain that the requested
number of cpus was greater than 123, but for gicv2 configs, it
should complain that the number is greater than 8.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1445189728-860-3-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable the fw_cfg DMA interface for the ARM virt machine.
Based on Gerd Hoffman's initial implementation.
Signed-off-by: Marc Marí <markmb@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Based on the specifications on docs/specs/fw_cfg.txt
This interface is an addon. The old interface can still be used as usual.
Based on Gerd Hoffman's initial implementation.
Signed-off-by: Marc Marí <markmb@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently PCI IO address 0 is not allowed even though
the IO space starts from 0. This update makes PCI IO
address 0 usable.
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Andrew Jones <drjones@redhat.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARM uses dashes instead of underscores for machine names. Fix imx25_pdk
which has not seen a release yet (so there is no legacy yet).
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1444445785-3648-1-git-send-email-crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Added change to tests/ds1338-test.c to use new machine name]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* For Collie, Akita, Spitz, Borzoi, Terrier and Tosa PDAs, provide
model numbers and manufacturer (Sharp) information.
Signed-off-by: Ryo ONODERA <ryo_on@yk.rim.or.jp>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARM/AArch64 KVM guests don't have any way to identify
themselves as KVM guests (x86 guests use a CPUID leaf). Now, we
could discuss all sorts of reasons why guests shouldn't need to
know that, but then there's always some case where it'd be
nice... Anyway, now that we have SMBIOS tables in ARM guests,
it's easy for the guest to know that it's a QEMU instance. This
patch takes that one step further, also identifying KVM, when
appropriate. Again, we could debate why generally nothing
should care whether it's of type QEMU or QEMU/KVM, but again,
sometimes it's nice to know...
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Wei Huang <wei@redhat.com>
Message-id: 1443017892-15567-1-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several devices don't survive object_unref(object_new(T)): they crash
or hang during cleanup, or they leave dangling pointers behind.
This breaks at least device-list-properties, because
qmp_device_list_properties() needs to create a device to find its
properties. Broken in commit f4eb32b "qmp: show QOM properties in
device-list-properties", v2.1. Example reproducer:
$ qemu-system-aarch64 -nodefaults -display none -machine none -S -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 4, "major": 2}, "package": ""}, "capabilities": []}}
{ "execute": "qmp_capabilities" }
{"return": {}}
{ "execute": "device-list-properties", "arguments": { "typename": "pxa2xx-pcmcia" } }
qemu-system-aarch64: /home/armbru/work/qemu/memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
Aborted (core dumped)
[Exit 134 (SIGABRT)]
Unfortunately, I can't fix the problems in these devices right now.
Instead, add DeviceClass member cannot_destroy_with_object_finalize_yet
to mark them:
* Hang during cleanup (didn't debug, so I can't say why):
"realview_pci", "versatile_pci".
* Dangling pointer in cpus: most CPUs, plus "allwinner-a10", "digic",
"fsl,imx25", "fsl,imx31", "xlnx,zynqmp", because they create such
CPUs
* Assert kvm_enabled(): "host-x86_64-cpu", host-i386-cpu",
"host-powerpc64-cpu", "host-embedded-powerpc-cpu",
"host-powerpc-cpu" (the powerpc ones can't currently reach the
assertion, because the CPUs are only registered when KVM is enabled,
but the assertion is arguably in the wrong place all the same)
Make qmp_device_list_properties() fail cleanly when the device is so
marked. This improves device-list-properties from "crashes, hangs or
leaves dangling pointers behind" to "fails". Not a complete fix, just
a better-than-nothing work-around. In the above reproducer,
device-list-properties now fails with "Can't list properties of device
'pxa2xx-pcmcia'".
This also protects -device FOO,help, which uses the same machinery
since commit ef52358 "qdev-monitor: include QOM properties in -device
FOO, help output", v2.2. Example reproducer:
$ qemu-system-aarch64 -machine none -device pxa2xx-pcmcia,help
Before:
qemu-system-aarch64: .../memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
After:
Can't list properties of device 'pxa2xx-pcmcia'
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Green <green@moxielogic.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Jia Liu <proljc@gmail.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1443689999-12182-10-git-send-email-armbru@redhat.com>
This causes the region to outlive the object, because it attaches the
region to /machine. This is not nice for the "realize" method, but
much worse for "instance_init" because it can cause dangling pointers
after a simple object_new/object_unref pair.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1443689999-12182-3-git-send-email-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The only generic code relying on this is linux-user. Linux user
already has a lot of #ifdef TARGET_ customisation so instead, define
ELF_ARCH as either EM_ARM or EM_AARCH64 appropriately.
The armv7m bootloader can just pass EM_ARM directly, as that
is architecture specific code. Note that arm_boot already has its own
logic selecting an arm specific elf machine so this makes V7M more
consistent with arm_boot.
This removes another architecture specific definition from the global
namespace.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While virt machine creates two flash devices with total size 0x08000000,
the ACPI table generation code was wrongly using this total size as the
size of each flash device, so it would overlap other MMIO spaces.
Make each device entry in the table half the total; this brings the
ACPI table into line with the code which generates the device tree
and which creates the flash devices themselves.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Wei Huang <wei@redhat.com>
Tested-by: Graeme Gregory <graeme.gregory@linaro.org>
Message-id: 1442455041-6596-1-git-send-email-shannon.zhao@linaro.org
[PMM: edited commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add gic_version to VirtMachineState, set it to value of the option
and pass it around where necessary. Instantiate devices and fdt
nodes according to the choice.
max_cpus for virt machine increased to 123 (calculated from redistributor
space available in the memory map). GICv2 compatibility check happens
inside arm_gic_common_realize().
ITS region is added to the memory map too, however currently it not used,
just reserved.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Tested-by: Ashok kumar <ashoks@broadcom.com>
[PMM: Added missing cpu_to_le* calls, thanks to Shannon Zhao]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The script used for converting from QEMUMachine had used one
DEFINE_MACHINE() per machine registered. In cases where multiple
machines are registered from one source file, avoid the excessive
generation of module init functions by reverting this unrolling.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Convert all machines to use DEFINE_MACHINE() instead of QEMUMachine
automatically using a script.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Style cleanups, convert imx25_pdk machine]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This will make the code follow the same pattern used for other machines,
and will make it easier to automatically convert the code to be
QOM-based.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We don't need a QEMUMachine array to query max_cpus, if we can get the
corresponding MachineClass.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The code is checking smp_cpus against EXYNOS4210_NCPUS, not against
max_cpus, so use EXYNOS4210_NCPUS in the error message for consistency.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now all TYPE_MACHINE subclasses use MACHINE_TYPE_NAME to generate the
class name. So instead of requiring each subclass to set
MachineClass::name manually, we can now set it automatically at the
TYPE_MACHINE class_base_init() function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
[AF/ehabkost: Updated for s390-ccw machines]
[AF: Cleanup of intermediate virt and vexpress name handling]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Machine class names should use the "-machine" suffix to allow
class-name-based machine class lookup to work. Rename the arm virt
machine class using the MACHINE_TYPE_NAME macro.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Machine class names should use the "-machine" suffix to allow
class-name-based machine class lookup to work. Rename the vexpress
machine classes using the MACHINE_TYPE_NAME macro.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[AF: Introduce VEXPRESS_*_MACHINE_NAME]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The MachineClass::name field won't be ever be used on TYPE_VEXPRESS, as
it is an abstract class and the machine class lookup code explicitly
skips abstract classes. We can remove it to make the code simpler.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Symptom:
$ qemu-system-x86_64 -m 10000000
Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456:
upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory
Aborted (core dumped)
Root cause: commit ef701d7 screwed up handling of out-of-memory
conditions. Before the commit, we report the error and exit(1), in
one place, ram_block_add(). The commit lifts the error handling up
the call chain some, to three places. Fine. Except it uses
&error_abort in these places, changing the behavior from exit(1) to
abort(), and thus undoing the work of commit 3922825 "exec: Don't
abort when we can't allocate guest memory".
The three places are:
* memory_region_init_ram()
Commit 4994653 (right after commit ef701d7) lifted the error
handling further, through memory_region_init_ram(), multiplying the
incorrect use of &error_abort. Later on, imitation of existing
(bad) code may have created more.
* memory_region_init_ram_ptr()
The &error_abort is still there.
* memory_region_init_rom_device()
Doesn't need fixing, because commit 33e0eb5 (soon after commit
ef701d7) lifted the error handling further, and in the process
changed it from &error_abort to passing it up the call chain.
Correct, because the callers are realize() methods.
Fix the error handling after memory_region_init_ram() with a
Coccinelle semantic patch:
@r@
expression mr, owner, name, size, err;
position p;
@@
memory_region_init_ram(mr, owner, name, size,
(
- &error_abort
+ &error_fatal
|
err@p
)
);
@script:python@
p << r.p;
@@
print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column)
When the last argument is &error_abort, it gets replaced by
&error_fatal. This is the fix.
If the last argument is anything else, its position is reported. This
lets us check the fix is complete. Four positions get reported:
* ram_backend_memory_alloc()
Error is passed up the call chain, ultimately through
user_creatable_complete(). As far as I can tell, it's callers all
handle the error sanely.
* fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize()
DeviceClass.realize() methods, errors handled sanely further up the
call chain.
We're good. Test case again behaves:
$ qemu-system-x86_64 -m 10000000
qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory
[Exit 1 ]
The next commits will repair the rest of commit ef701d7's damage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
The errp and err variable have unnecessary brackets around them,
so remove the brackets.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 9900393572b63f2ec3d68785ca98193d81e0ac71.1441758563.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A number of source files have statements accidentally
terminated by a double semicolon - eg 'foo = bar;;'.
This is harmless but a mistake none the less.
The tcg/ia64/tcg-target.c file is whitelisted because
it has valid use of ';;' in a comment containing assembly
code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Connect the Sysbus AHCI device to ZynqMP.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sai Pavan Boddu <saipava@xilinx.com>
[PMM: removed unnecessary brackets in error_propagate call]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert all of the non-realize error_propagate() calls into error_abort
calls as they shouldn't be user visible failure cases.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we're creating a board with support for TrustZone, then enable
it on the GIC model as well as on the CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441383782-24378-7-git-send-email-peter.maydell@linaro.org
Switch the default for the 'virt' board to not providing TrustZone
support in either the CPU or the GIC. This is primarily for the
benefit of UEFI, which currently assumes there is no TrustZone
support, and does not set the GIC up correctly if it is TZ-aware.
It also means the board is consistent about its behaviour whether
we're using KVM or TCG (KVM never has TrustZone support).
If TrustZone support is required (for instance for running test
suites or TZ-aware firmware) it can be enabled with the
"-machine secure=on" command line option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441383782-24378-6-git-send-email-peter.maydell@linaro.org
For ARM we have a little minimalist bootloader in hw/arm/boot.c which
takes the place of firmware if we're directly booting a Linux kernel.
Unfortunately a few devices need special case handling in this situation
to do the initialization which on real hardware would be done by
firmware. (In particular if we're booting a kernel in NonSecure state
then we need to make a TZ-aware GIC put all its interrupts into Group 1,
or the guest will be unable to use them.)
Create a new QOM interface which can be implemented by devices which
need to do something different from their default reset behaviour.
The callback will be called after machine initialization and before
first reset.
Suggested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441383782-24378-3-git-send-email-peter.maydell@linaro.org
At least with KVM, currently there's no reason why QEMU would not be
capable of handling Aff3 != 0. This commit fixes up FDT creation in such
a case.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-id: eef5a86e6d9a313780dbc23b35fcb65df42a3e9e.1441366248.git.p.fedin@samsung.com
[PMM: folded two overlong lines]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested by booting a minimal Linux system on the emulated platform
Tested by booting the Xvisor hypervisor on the emulated platform
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: d27347300d253509d921bc27a6d0a14db877478b.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now we support the following devices:
* CPU: ARM926
* Interrupt Controller: AVIC
* CCM
* UART x 5
* EPIT x 2
* GPT x 4
* FEC
* I2C x 3
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the KZM board to use the i.MX31 SoC defintition instead of
redefining the entire SoC on the machine level. Major rewrite of the
machine init code.
While touching the memory map comment de-indent to the correct level
of indentation.
This obsoletes the legacy i.MX device device creation helpers which are removed.
Tested by booting a minimal Linux system on the emulated platform
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 5e783561f092e1c939562fdff001f1ab1194b07f.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now we support the following devices:
* CPU: ARM1136
* Interrupt Controller: AVIC
* CCM
* UART x 2
* EPIT x 2
* GPT
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This large region is necessary for some devices like ivshmem and video cards
32-bit kernels can be built without LPAE support. In this case such a kernel
will not be able to use PCI controller which has windows in high addresses.
In order to work around the problem, "highmem" option is introduced. It
defaults to on on, but can be manually set to off in order to be able to run
those old 32-bit guests.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
[PMM: Added missing ULL suffixes and a comment to the a15memmap[] entry]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch generates smbios tables for ARM mach-virt. Also add
CONFIG_SMBIOS=y for ARM default config.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1440615870-9518-3-git-send-email-wei@redhat.com
[PMM: Added missing braces around an if().]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Xilinx EP108 has four separate OCM banks which are located
adjacent to each other. This patch adds the four banks to
the ZynqMP SoC.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: afa6ba31163a5d541a0bef4b0dc11f2597e0c495.1436813543.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wire up the secure timer interrupt. Since we've defined
that the plain old physical timer is the NS timer, we can
drop the now-out-of-date comment about QEMU not having TZ.
Use a data-driven loop to wire up the timer interrupts, since
we now have four of them and the code is the same for each.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1437047249-2357-4-git-send-email-peter.maydell@linaro.org
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This small inline returns correct GIC class name depending on whether we
use KVM acceleration or not. Avoids duplicating the condition everywhere.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 4f26901be9b844b563673ce3ad08eeedbb7a7132.1438758065.git.p.fedin@samsung.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
