As per ISA:
"For CSRRWI, if rd=x0, then the instruction shall not read the CSR and
shall not cause any of the side effects that might occur on a CSR read."
trans_csrrwi() and trans_csrrw() call do_csrw() if rd=x0, do_csrw() calls
riscv_csrrw_do64(), via helper_csrw() passing NULL as *ret_value.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230808090914.17634-1-nikita.shubin@maquefel.me>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to the new spec, when vsiselect has a reserved value, attempts
from M-mode or HS-mode to access vsireg, or from VS-mode to access
sireg, should preferably raise an illegal instruction exception.
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230816061647.600672-1-tommy.wu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the rule-lock bypass (RLB) bit is set in the mseccfg CSR, the PMP
configuration lock bits must not apply. While this behavior is
implemented for the pmpcfgX CSRs, this bit is not respected for
changes to the pmpaddrX CSRs. This patch ensures that pmpaddrX CSR
writes work even on locked regions when the global rule-lock bypass is
enabled.
Signed-off-by: Leon Schuermann <leons@opentitan.org>
Reviewed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230829215046.1430463-1-leon@is.currently.online>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_trigger_init() had been called on reset events that can happen
several times for a CPU and it allocated timers for itrigger. If old
timers were present, they were simply overwritten by the new timers,
resulting in a memory leak.
Divide riscv_trigger_init() into two functions, namely
riscv_trigger_realize() and riscv_trigger_reset() and call them in
appropriate timing. The timer allocation will happen only once for a
CPU in riscv_trigger_realize().
Fixes: 5a4ae64cac ("target/riscv: Add itrigger support when icount is enabled")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230818034059.9146-1-akihiko.odaki@daynix.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the accelerated SubBytes/ShiftRows/AddRoundKey AES helper to
implement the first half of the key schedule derivation. This does not
actually involve shifting rows, so clone the same value into all four
columns of the AES vector to counter that operation.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230831154118.138727-1-ardb@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 6df0b37e2ab breaks a --enable-debug build in a non-KVM
environment with the following error:
/usr/bin/ld: libqemu-riscv64-softmmu.fa.p/hw_intc_riscv_aplic.c.o: in function `riscv_kvm_aplic_request':
./qemu/build/../hw/intc/riscv_aplic.c:486: undefined reference to `kvm_set_irq'
collect2: error: ld returned 1 exit status
This happens because the debug build will poke into the
'if (is_kvm_aia(aplic->msimode))' block and fail to find a reference to
the KVM only function riscv_kvm_aplic_request().
There are multiple solutions to fix this. We'll go with the same
solution from the previous patch, i.e. add a kvm_enabled() conditional
to filter out the block. But there's a catch: riscv_kvm_aplic_request()
is a local function that would end up being used if the compiler crops
the block, and this won't work. Quoting Richard Henderson's explanation
in [1]:
"(...) the compiler won't eliminate entire unused functions with -O0"
We'll solve it by moving riscv_kvm_aplic_request() to kvm.c and add its
declaration in kvm_riscv.h, where all other KVM specific public
functions are already declared. Other archs handles KVM specific code in
this manner and we expect to do the same from now on.
[1] https://lore.kernel.org/qemu-riscv/d2f1ad02-eb03-138f-9d08-db676deeed05@linaro.org/
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230830133503.711138-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zicond is now codegen supported in both llvm and gcc.
This change allows seamless enabling/testing of zicond in downstream
projects. e.g. currently riscv-gnu-toolchain parses elf attributes
to create a cmdline for qemu but fails short of enabling it because of
the "x-" prefix.
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Message-ID: <20230808181715.436395-1-vineetg@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In the same emulated RISC-V host, the 'host' KVM CPU takes 4 times
longer to boot than the 'rv64' KVM CPU.
The reason is an unintended behavior of riscv_cpu_satp_mode_finalize()
when satp_mode.supported = 0, i.e. when cpu_init() does not set
satp_mode_max_supported(). satp_mode_max_from_map(map) does:
31 - __builtin_clz(map)
This means that, if satp_mode.supported = 0, satp_mode_supported_max
wil be '31 - 32'. But this is C, so satp_mode_supported_max will gladly
set it to UINT_MAX (4294967295). After that, if the user didn't set a
satp_mode, set_satp_mode_default_map(cpu) will make
cfg.satp_mode.map = cfg.satp_mode.supported
So satp_mode.map = 0. And then satp_mode_map_max will be set to
satp_mode_max_from_map(cpu->cfg.satp_mode.map), i.e. also UINT_MAX. The
guard "satp_mode_map_max > satp_mode_supported_max" doesn't protect us
here since both are UINT_MAX.
And finally we have 2 loops:
for (int i = satp_mode_map_max - 1; i >= 0; --i) {
Which are, in fact, 2 loops from UINT_MAX -1 to -1. This is where the
extra delay when booting the 'host' CPU is coming from.
Commit 43d1de32f8 already set a precedence for satp_mode.supported = 0
in a different manner. We're doing the same here. If supported == 0,
interpret as 'the CPU wants the OS to handle satp mode alone' and skip
satp_mode_finalize().
We'll also put a guard in satp_mode_max_from_map() to assert out if map
is 0 since the function is not ready to deal with it.
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: 6f23aaeb9b ("riscv: Allow user to set the satp mode")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230817152903.694926-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Svadu specification updated the name of the *envcfg bit from
HADE to ADUE.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230816141916.66898-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We create a vAIA chip by using the KVM_DEV_TYPE_RISCV_AIA and then set up
the chip with the KVM_DEV_RISCV_AIA_GRP_* APIs.
We also extend KVM accelerator to specify the KVM AIA mode. The "riscv-aia"
parameter is passed along with --accel in QEMU command-line.
1) "riscv-aia=emul": IMSIC is emulated by hypervisor
2) "riscv-aia=hwaccel": use hardware guest IMSIC
3) "riscv-aia=auto": use the hardware guest IMSICs whenever available
otherwise we fallback to software emulation.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-4-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We check the in-kernel irqchip support when using KVM acceleration.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230727102439.22554-3-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit a47842d ("riscv: Add support for the Zfa extension") implemented the zfa extension.
However, it has some typos for fleq.d and fltq.d. Both of them misused the fltq.s
helper function.
Fixes: a47842d ("riscv: Add support for the Zfa extension")
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230728003906.768-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RVA23 Profiles states:
The RVA23 profiles are intended to be used for 64-bit application
processors that will run rich OS stacks from standard binary OS
distributions and with a substantial number of third-party binary user
applications that will be supported over a considerable length of time
in the field.
The chapter 4 of the unprivileged spec introduces the Zihintntl extension
and Zihintntl is a mandatory extension presented in RVA23 Profiles, whose
purpose is to enable application and operating system portability across
different implementations. Thus the DTS should contain the Zihintntl ISA
string in order to pass to software.
The unprivileged spec states:
Like any HINTs, these instructions may be freely ignored. Hence, although
they are described in terms of cache-based memory hierarchies, they do not
mandate the provision of caches.
These instructions are encoded with non-used opcode, e.g. ADD x0, x0, x2,
which QEMU already supports, and QEMU does not emulate cache. Therefore
these instructions can be considered as a no-op, and we only need to add
a new property for the Zihintntl extension.
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Message-ID: <20230726074049.19505-2-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These are WARL fields - zero out the bits for unavailable counters and
special case the TM bit in mcountinhibit which is hardwired to zero.
This patch achieves this by modifying the value written so that any use
of the field will see the correctly masked bits.
Tested by modifying OpenSBI to write max value to these CSRs and upon
subsequent read the appropriate number of bits for number of PMUs is
enabled and the TM bit is zero in mcountinhibit.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20230802124906.24197-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvksed vector-crypto extension, which
consists of the following instructions:
* vsm4k.vi
* vsm4r.[vv,vs]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
[lawrence.hunter@codethink.co.uk: Moved SM4 functions from
crypto_helper.c to vcrypto_helper.c]
[nazar.kazakov@codethink.co.uk: Added alignment checks, refactored code to
use macros, and minor style changes]
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-16-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvkg vector-crypto extension, which
consists of the following instructions:
* vgmul.vv
* vghsh.vv
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvkg property]
[max.chou@sifive.com: Replaced uint by int for cross win32 build]
Message-ID: <20230711165917.2629866-13-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvksh vector-crypto extension, which
consists of the following instructions:
* vsm3me.vv
* vsm3c.vi
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvksh property]
Message-ID: <20230711165917.2629866-12-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvknh vector-crypto extension, which
consists of the following instructions:
* vsha2ms.vv
* vsha2c[hl].vv
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvknha & x-zvknhb properties]
[max.chou@sifive.com: Replaced SEW selection to happened during
translation]
Message-ID: <20230711165917.2629866-11-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvkned vector-crypto extension, which
consists of the following instructions:
* vaesef.[vv,vs]
* vaesdf.[vv,vs]
* vaesdm.[vv,vs]
* vaesz.vs
* vaesem.[vv,vs]
* vaeskf1.vi
* vaeskf2.vi
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
[max.chou@sifive.com: Replaced vstart checking by TCG op]
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Imported aes-round.h and exposed x-zvkned
property]
[max.chou@sifive.com: Fixed endian issues and replaced the vstart & vl
egs checking by helper function]
[max.chou@sifive.com: Replaced bswap32 calls in aes key expanding]
Message-ID: <20230711165917.2629866-10-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvbb vector-crypto extension, which
consists of the following instructions:
* vrol.[vv,vx]
* vror.[vv,vx,vi]
* vbrev8.v
* vrev8.v
* vandn.[vv,vx]
* vbrev.v
* vclz.v
* vctz.v
* vcpop.v
* vwsll.[vv,vx,vi]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: William Salmon <will.salmon@codethink.co.uk>
Co-authored-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
[max.chou@sifive.com: Fix imm mode of vror.vi]
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: William Salmon <will.salmon@codethink.co.uk>
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[max.chou@sifive.com: Exposed x-zvbb property]
Message-ID: <20230711165917.2629866-9-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move some macros out of `vector_helper` and into `vector_internals`.
This ensures they can be used by both vector and vector-crypto helpers
(latter implemented in proceeding commits).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-8-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zvbb (implemented in later commit) has a widening instruction, which
requires an extra check on the enabled extensions. Refactor
GEN_OPIVX_WIDEN_TRANS() to take a check function to avoid reimplementing
it.
Signed-off-by: Dickon Hood <dickon.hood@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-7-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the checks out of `do_opiv{v,x,i}_gvec{,_shift}` functions
and into the corresponding macros. This enables the functions to be
reused in proceeding commits without check duplication.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-6-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit adds support for the Zvbc vector-crypto extension, which
consists of the following instructions:
* vclmulh.[vx,vv]
* vclmul.[vx,vv]
Translation functions are defined in
`target/riscv/insn_trans/trans_rvvk.c.inc` and helpers are defined in
`target/riscv/vcrypto_helper.c`.
Co-authored-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Co-authored-by: Max Chou <max.chou@sifive.com>
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Signed-off-by: Lawrence Hunter <lawrence.hunter@codethink.co.uk>
Signed-off-by: Max Chou <max.chou@sifive.com>
[max.chou@sifive.com: Exposed x-zvbc property]
Message-ID: <20230711165917.2629866-5-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove the redundant "vl == 0" check which is already included within the vstart >= vl check, when vl == 0.
Signed-off-by: Nazar Kazakov <nazar.kazakov@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230711165917.2629866-4-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Refactor the non SEW-specific stuff out of `GEN_OPIVV_TRANS` into
function `opivv_trans` (similar to `opivi_trans`). `opivv_trans` will be
used in proceeding vector-crypto commits.
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Message-ID: <20230711165917.2629866-3-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Take some functions/macros out of `vector_helper` and put them in a new
module called `vector_internals`. This ensures they can be used by both
vector and vector-crypto helpers (latter implemented in proceeding
commits).
Signed-off-by: Kiran Ostrolenk <kiran.ostrolenk@codethink.co.uk>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230711165917.2629866-2-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The AES MixColumns and InvMixColumns operations are relatively
expensive 4x4 matrix multiplications in GF(2^8), which is why C
implementations usually rely on precomputed lookup tables rather than
performing the calculations on demand.
Given that we already carry those tables in QEMU, we can just grab the
right value in the implementation of the RISC-V AES32 instructions. Note
that the tables in question are permuted according to the respective
Sbox, so we can omit the Sbox lookup as well in this case.
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Zewen Ye <lustrew@foxmail.com>
Cc: Weiwei Li <liweiwei@iscas.ac.cn>
Cc: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230731084043.1791984-1-ardb@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit bef6f008b98(accel/tcg: Return bool from page_check_range) converts
integer return value to bool type. However, it wrongly converted the use
of the API in riscv fault-only-first, where page_check_range < = 0, should
be converted to !page_check_range.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230729031618.821-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The cpu->cfg.epmp extension is still experimental, but it already has a
'smepmp' riscv,isa string. Add it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230720132424.371132-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
zmmul was promoted from experimental to ratified in commit 6d00ffad4e.
Add a riscv,isa string for it.
Fixes: 6d00ffad4e ("target/riscv: move zmmul out of the experimental properties")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230720132424.371132-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'host' CPU is available in a CONFIG_KVM build and it's currently
available for all accels, but is a KVM only CPU. This means that in a
RISC-V KVM capable host we can do things like this:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg -cpu host --nographic
qemu-system-riscv64: H extension requires priv spec 1.12.0
This CPU does not have a priv spec because we don't filter its extensions
via priv spec. We shouldn't be reaching riscv_cpu_realize_tcg() at all
with the 'host' CPU.
We don't have a way to filter the 'host' CPU out of the available CPU
options (-cpu help) if the build includes both KVM and TCG. What we can
do is to error out during riscv_cpu_realize_tcg() if the user chooses
the 'host' CPU with accel=tcg:
$ ./build/qemu-system-riscv64 -M virt,accel=tcg -cpu host --nographic
qemu-system-riscv64: 'host' CPU is not compatible with TCG acceleration
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230721133411.474105-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"qemu/main-loop.h" declares functions related to QEMU's
main loop mutex, which these files don't access. Remove
the unused "qemu/main-loop.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-8-philmd@linaro.org>
These files don't use the CPU ld/st API, remove the unnecessary
"exec/cpu_ldst.h" header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230828221314.18435-7-philmd@linaro.org>
All these files access the CPU LD/ST API declared in "exec/cpu_ldst.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-4-philmd@linaro.org>
Declarations from "riscv/pmu.h" don't need anything from "qemu/log.h",
reduce it's inclusion to the source.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-3-philmd@linaro.org>
Changes the address type of the guest memory read/write functions from
target_ulong to abi_ptr. (abi_ptr is currently typedef'd to target_ulong
but that will change in a following commit.) This will reduce the
coupling between accel/ and target/.
Note: Function pointers that point to cpu_[st|ld]*() in target/riscv and
target/rx are also updated in this commit.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-6-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
kvm_arch_get_default_type() returns the default KVM type. This hook is
particularly useful to derive a KVM type that is valid for "none"
machine model, which is used by libvirt to probe the availability of
KVM.
For MIPS, the existing mips_kvm_type() is reused. This function ensures
the availability of VZ which is mandatory to use KVM on the current
QEMU.
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-2-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added doc comment for new function]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
cpu->cfg.mvendorid is a 32 bit field and kvm_set_one_reg() always write
a target_ulong val, i.e. a 64 bit field in a 64 bit host.
Given that we're passing a pointer to the mvendorid field, the reg is
reading 64 bits starting from mvendorid and going 32 bits in the next
field, marchid. Here's an example:
$ ./qemu-system-riscv64 -machine virt,accel=kvm -m 2G -smp 1 \
-cpu rv64,marchid=0xab,mvendorid=0xcd,mimpid=0xef(...)
(inside the guest)
# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdc_zicbom_zicboz_zihintpause_zbb_sstc
mmu : sv57
mvendorid : 0xab000000cd
marchid : 0xab
mimpid : 0xef
'mvendorid' was written as a combination of 0xab (the value from the
adjacent field, marchid) and its intended value 0xcd.
Fix it by assigning cpu->cfg.mvendorid to a target_ulong var 'reg' and
use it as input for kvm_set_one_reg(). Here's the result with this patch
applied and using the same QEMU command line:
# cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdc_zicbom_zicboz_zihintpause_zbb_sstc
mmu : sv57
mvendorid : 0xcd
marchid : 0xab
mimpid : 0xef
This bug affects only the generic (rv64) CPUs when running with KVM in a
64 bit env since the 'host' CPU does not allow the machine IDs to be
changed via command line.
Fixes: 1fb5a622f7 ("target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230802180058.281385-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The previous check was failing with:
VLEN=128 ELEN = 64 SEW = 16 and LMUL = 1/8 which is a
valid combination.
Fix the check to allow valid combinations when VLEN is a multiple of
ELEN.
From the specification:
"In general, the requirement is to support LMUL ≥ SEWMIN/ELEN, where
SEWMIN is the narrowest supported SEW value and ELEN is the widest
supported SEW value. In the standard extensions, SEWMIN=8. For standard
vector extensions with ELEN=32, fractional LMULs of 1/2 and 1/4 must be
supported. For standard vector extensions with ELEN=64, fractional LMULs
of 1/2, 1/4, and 1/8 must be supported." Elsewhere in the specification
it makes clear that VLEN>=ELEN.
From inspection this new check allows:
VLEN=ELEN=64 1/2, 1/4, 1/8 for SEW >=8
VLEN=ELEN=32 1/2, 1/4 for SEW >=8
Fixes: d9b7609a1f ("target/riscv: rvv-1.0: configure instructions")
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230718131316.12283-2-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit bd30559568 made changes in how we're checking and disabling
extensions based on env->priv_ver. One of the changes was to move the
extension disablement code to the end of realize(), being able to
disable extensions after we've auto-enabled some of them.
An unfortunate side effect of this change started to happen with CPUs
that has an older priv version, like sifive-u54. Starting on commit
2288a5ce43 we're auto-enabling zca, zcd and zcf if RVC is enabled,
but these extensions are priv version 1.12.0. When running a cpu that
has an older priv ver (like sifive-u54) the user is spammed with
warnings like these:
qemu-system-riscv64: warning: disabling zca extension for hart 0x0000000000000000 because privilege spec version does not match
qemu-system-riscv64: warning: disabling zcd extension for hart 0x0000000000000000 because privilege spec version does not match
The warnings are part of the code that disables the extension, but in this
case we're throwing user warnings for stuff that we enabled on our own,
without user intervention. Users are left wondering what they did wrong.
A quick 8.1 fix for this nuisance is to check the CPU priv spec before
auto-enabling zca/zcd/zcf. A more appropriate fix will include a more
robust framework that will account for both priv_ver and user choice
when auto-enabling/disabling extensions, but for 8.1 we'll make it do
with this simple check.
It's also worth noticing that this is the only case where we're
auto-enabling extensions based on a criteria (in this case RVC) that
doesn't match the priv spec of the extensions we're enabling. There's no
need for more 8.1 band-aids.
Cc: Conor Dooley <conor@kernel.org>
Fixes: 2288a5ce43 ("target/riscv: add cfg properties for Zc* extension")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20230717154141.60898-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Replace the 0/-1 result with true/false.
Invert the sense of the test of all callers.
Document the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-25-richard.henderson@linaro.org>
This patch introduces the RISC-V Zfa extension, which introduces
additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of float register bigger than XLEN
* Quiet comparison instructions (fleq/fltq)
Zfa defines its instructions in combination with the following extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)
Since QEMU does not support the RISC-V quad-precision floating-point
ISA extension (Q), this patch does not include the instructions that
depend on this extension. All other instructions are included in this
patch.
The Zfa specification can be found here:
https://github.com/riscv/riscv-isa-manual/blob/master/src/zfa.tex
The Zfa specifciation is frozen and is in public review since May 3, 2023:
https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/SED4ntBkabg
The patch also includes a TCG test for the fcvtmod.w.d instruction.
The test cases test for correct results and flag behaviour.
Note, that the Zfa specification requires fcvtmod's flag behaviour
to be identical to a fcvt with the same operands (which is also
tested).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230710071243.282464-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If we don't set a proper cbom_blocksize|cboz_blocksize in the FDT the
Linux Kernel will fail to detect the availability of the CBOM/CBOZ
extensions, regardless of the contents of the 'riscv,isa' DT prop.
The FDT is being written using the cpu->cfg.cbom|z_blocksize attributes,
so let's expose them as user properties like it is already done with
TCG.
This will also require us to determine proper blocksize values during
init() time since the FDT is already created during realize(). We'll
take a ride in kvm_riscv_init_multiext_cfg() to do it. Note that we
don't need to fetch both cbom and cboz blocksizes every time: check for
their parent extensions (icbom and icboz) and only read the blocksizes
if needed.
In contrast with cbom|z_blocksize properties from TCG, the user is not
able to set any value that is different from the 'host' value when
running KVM. KVM can be particularly harsh dealing with it: a ENOTSUPP
can be thrown for the mere attempt of executing kvm_set_one_reg() for
these 2 regs.
Hopefully we don't need to call kvm_set_one_reg() for these regs.
We'll check if the user input matches the host value in
kvm_cpu_set_cbomz_blksize(), the set() accessor for both blocksize
properties. We'll fail fast since it's already known to not be
supported.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-21-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are 2 places in which we need to get a pointer to a certain
property of the cpu->cfg struct based on property offset. Next patch
will add a couple more.
Create a helper to avoid repeating this code over and over.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're now ready to update the multi-letter extensions status for KVM.
kvm_riscv_update_cpu_cfg_isa_ext() is called called during vcpu creation
time to verify which user options changes host defaults (via the 'user_set'
flag) and tries to write them back to KVM.
Failure to commit a change to KVM is only ignored in case KVM doesn't
know about the extension (-EINVAL error code) and the user wanted to
disable the given extension. Otherwise we're going to abort the boot
process.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM-specific properties are being created inside target/riscv/kvm.c. But
at this moment we're gathering all the remaining properties from TCG and
adding them as is when running KVM. This creates a situation where
non-KVM properties are setting flags to 'true' due to its default
settings (e.g. Zawrs). Users can also freely enable them via command
line.
This doesn't impact runtime per se because KVM doesn't care about these
flags, but code such as riscv_isa_string_ext() take those flags into
account. The result is that, for a KVM guest, setting non-KVM properties
will make them appear in the riscv,isa DT.
We want to keep the same API for both TCG and KVM and at the same time,
when running KVM, forbid non-KVM extensions to be enabled internally. We
accomplish both by changing riscv_cpu_add_user_properties() to add a
mock boolean property for every non-KVM extension in
riscv_cpu_extensions[]. Then, when running KVM, users are still free to
set extensions at will, but we'll error out if a non-KVM extension is
enabled. Setting such extension to 'false' will be ignored.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_isa_string_ext() is being used by riscv_isa_string(), which is
then used by boards to retrieve the 'riscv,isa' string to be written in
the FDT. All this happens after riscv_cpu_realize(), meaning that we're
already past riscv_cpu_validate_set_extensions() and, more important,
riscv_cpu_disable_priv_spec_isa_exts().
This means that all extensions that needed to be disabled due to
priv_spec mismatch are already disabled. Checking this again during
riscv_isa_string_ext() is unneeded. Remove it.
As a bonus, riscv_isa_string_ext() can now be used with the 'host'
KVM-only CPU type since it doesn't have a env->priv_ver assigned and it
would fail this check for no good reason.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_cpu_add_user_properties() ended up with an excess of "#ifndef
CONFIG_USER_ONLY" blocks after changes that added KVM properties
handling.
KVM specific properties are required to be created earlier than their
TCG counterparts, but the remaining props can be created at any order.
Move riscv_add_satp_mode_properties() to the start of the function,
inside the !CONFIG_USER_ONLY block already present there, to remove the
last ifndef block.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
