Aspeed SoCs are complex devices that can not be specified on the
command line. Fix that to avoid QEMU aborts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2227
Fixes: f25c0ae107 ("aspeed/soc: Add AST2600 support")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240319150903.413662-1-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using xlnx-zynqmp-pmu-soc on the command line causes QEMU to crash:
./qemu-system-microblazeel -M petalogix-ml605 -device xlnx-zynqmp-pmu-soc
**
ERROR:tcg/tcg.c:813:tcg_register_thread: assertion failed: (n < tcg_max_ctxs)
Bail out!
Aborted (core dumped)
Mark the device with "user_creatable = false" to avoid that this can happen.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2229
Message-ID: <20240322183153.1023359-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Drop the "xfslibs-dev" package which should not be necessary anymore
since commit a5730b8bd3 ("block/file-posix: Simplify the XFS_IOC_DIOINFO
handling").
Message-ID: <20240320104144.823425-3-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "[s390x] GCC (other-system)" and the "[s390x] GCC check-tcg"
jobs are hitting the 50 minutes timeout in Travis quite frequently
since a while.
To fix it, we've got to drop a lot of the targets from the target
list in the jobs to make them work again.
With regards to the "check-tcg" test, we can move the check with
"s390x-linux-user" to the "user" job instead which also builds
the s390x-linux-user target.
And while we're at it, remove the "--enable-fdt=system" configure
switch (since this is not required nowadays anymore).
Message-ID: <20240320104144.823425-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZf1WZgAKCRBAov/yOSY+
35zZBADDPLM3130Q/2zsGhol1C538i4+hYRbrX+OsLnlaldyE3NqCPcgaKwVE3xS
T9aOln91rDyQedz4DVYYSx+Oa1JpRjGko957REmopL50SJOYi6n7YhHJksaUirjJ
tMDZdPClOegieOpCu8LgJAVhaxTpZvfLedJVPt7O6Fl/uP3pLg==
=XLqh
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240322' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240322
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZf1WZgAKCRBAov/yOSY+
# 35zZBADDPLM3130Q/2zsGhol1C538i4+hYRbrX+OsLnlaldyE3NqCPcgaKwVE3xS
# T9aOln91rDyQedz4DVYYSx+Oa1JpRjGko957REmopL50SJOYi6n7YhHJksaUirjJ
# tMDZdPClOegieOpCu8LgJAVhaxTpZvfLedJVPt7O6Fl/uP3pLg==
# =XLqh
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 22 Mar 2024 09:59:02 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240322' of https://gitlab.com/gaosong/qemu:
target/loongarch: Fix qemu-system-loongarch64 assert failed with the option '-d int'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Do not enable all named features by default
* A range of Vector fixes
* Update APLIC IDC after claiming iforce register
* Remove the dependency of Zvfbfmin to Zfbfmin
* Fix mode in riscv_tlb_fill
* Fix timebase-frequency when using KVM acceleration
-----BEGIN PGP SIGNATURE-----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=8vP1
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20240322' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.0
* Do not enable all named features by default
* A range of Vector fixes
* Update APLIC IDC after claiming iforce register
* Remove the dependency of Zvfbfmin to Zfbfmin
* Fix mode in riscv_tlb_fill
* Fix timebase-frequency when using KVM acceleration
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmX9RscACgkQr3yVEwxT
# gBNaRg/+KUSF6AuY25pS7GawbufBbwWWaWN9G/inPVoCnLbeYrkB3uZw3nBd3iV8
# KiD9Azabl6TLBFC/f7eP9alNDIoSrq5EliayrlFEZIncYvig2Y3CkWUeK6oJqDp2
# Dz1Vah4IB96bU2/M9icyHkh3tnSnbhq0JrbgoAYwWutZy4ERYugTHulOGPxBj64I
# JIfb8wYqaak3Uak+g0mz/YBNHegLEDxIzIRhO4oWPE0MWKSO3t79G9qVAYi7pkFB
# ZQQasZy0h9ZpwKvVajiO8yjwh7COI0IPU+4vZNkNXue0SXQvAvcKA4DdaTwmMTio
# 9UM9HRB371F5LtJLdvAT2TR8FfW26Y7xBe458jheFOnPHKwxEFtUFCQ39UJB3bDN
# k7CYvU3GIqUJHD7PtYZfzTdYkdnIDpr9yKTPP2/nCN53FzXuJs/XTyySphJ6mZ2m
# dsr1bnJn/ncZP7W2vdWGfgQEKt2CHfE5qWM++RwhmQc+IKn2ImMA0hBsg6Gl2imB
# 9WANt3UX784VDmcwcFVgDgr6nftDs7gjVCtHAaRV7Oq2f9hcr17pRxg66mSXs0BX
# fMhcqHBe01LpZQRbaGQ0ImTQksEFyH2KTvt0kjF4SfpVzMfVOi/Zmy9goYNq4iYd
# tfucBbXVhpzbJ/9HeOzKAJQ2Wt0NyLiyDIOkWXj61WquS/0Mr9g=
# =8vP1
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 22 Mar 2024 08:52:23 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240322' of https://github.com/alistair23/qemu:
target/riscv/kvm: fix timebase-frequency when using KVM acceleration
target/riscv: Fix mode in riscv_tlb_fill
target/riscv: rvv: Remove the dependency of Zvfbfmin to Zfbfmin
hw/intc: Update APLIC IDC after claiming iforce register
target/riscv/vector_helper.c: optimize loops in ldst helpers
target/riscv: enable 'vstart_eq_zero' in the end of insns
trans_rvv.c.inc: remove redundant mark_vs_dirty() calls
target/riscv: remove 'over' brconds from vector trans
target/riscv/vector_helpers: do early exit when vstart >= vl
target/riscv: always clear vstart for ldst_whole insns
target/riscv: always clear vstart in whole vec move insns
target/riscv/vector_helper.c: fix 'vmvr_v' memcpy endianess
trans_rvv.c.inc: set vstart = 0 in int scalar move insns
target/riscv/vector_helper.c: set vstart = 0 in GEN_VEXT_VSLIDEUP_VX()
target/riscv: do not enable all named features by default
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I was too quick in sending the coroutine pool sizing change for -rc0 and still
needed to address feedback from Daniel Berrangé.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmX8bOUACgkQnKSrs4Gr
c8hcHAf/cWacqq8B6fiUVszTHBZuvOn+curY0JGjwA6D1yeWmUVkn4xk06GYA8Zc
wrm5jTy9nznt/Es9V8DyOCgYAPyKgDsavP1uuPjLTtJnA1lXgdrjfUi7Swd4B+5r
rBb+WJZXa9sGM8uy2wcPxTFmIgYT7u2/b8JaOnUDBIIdvhmyOBJZTOnfRzh9xCz/
0vmPseq7qgWJohzpx5AVcxT3BP1cRCmOw6sKyHTdughLj+DOqg0maKamLzwBnnqC
gdJBbplXnCH+Xz4jQ9JkzV6EWOq3MxcFFszvt8Zm3OjauSKOjTyrzUNRCZcoImYh
Ft0A5SIla3aRN+smoXC/LBKs2HnYUg==
=CNpd
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
I was too quick in sending the coroutine pool sizing change for -rc0 and still
needed to address feedback from Daniel Berrangé.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmX8bOUACgkQnKSrs4Gr
# c8hcHAf/cWacqq8B6fiUVszTHBZuvOn+curY0JGjwA6D1yeWmUVkn4xk06GYA8Zc
# wrm5jTy9nznt/Es9V8DyOCgYAPyKgDsavP1uuPjLTtJnA1lXgdrjfUi7Swd4B+5r
# rBb+WJZXa9sGM8uy2wcPxTFmIgYT7u2/b8JaOnUDBIIdvhmyOBJZTOnfRzh9xCz/
# 0vmPseq7qgWJohzpx5AVcxT3BP1cRCmOw6sKyHTdughLj+DOqg0maKamLzwBnnqC
# gdJBbplXnCH+Xz4jQ9JkzV6EWOq3MxcFFszvt8Zm3OjauSKOjTyrzUNRCZcoImYh
# Ft0A5SIla3aRN+smoXC/LBKs2HnYUg==
# =CNpd
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Mar 2024 17:22:45 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
coroutine: reserve 5,000 mappings
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-system-loongarch64 assert failed with the option '-d int',
the helper_idle() raise an exception EXCP_HLT, but the exception name is undefined.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240321123606.1704900-1-gaosong@loongson.cn>
The timebase-frequency of guest OS should be the same with host
machine. The timebase-frequency value in DTS should be got from
hypervisor when using KVM acceleration.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Message-ID: <20240314061510.9800-1-yongxuan.wang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Need to convert mmu_idx to privilege mode for PMP function.
Signed-off-by: Irina Ryapolova <irina.ryapolova@syntacore.com>
Fixes: b297129ae1 ("target/riscv: propagate PMP permission to TLB page")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240320172828.23965-1-irina.ryapolova@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to the Zvfbfmin definition in the RISC-V BF16 extensions spec,
the Zvfbfmin extension only requires either the V extension or the
Zve32f extension.
Signed-off-by: Max Chou <max.chou@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240321170929.1162507-1-max.chou@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, QEMU only sets the iforce register to 0 and returns early
when claiming the iforce register. However, this may leave mip.meip
remains at 1 if a spurious external interrupt triggered by iforce
register is the only pending interrupt to be claimed, and the interrupt
cannot be lowered as expected.
This commit fixes this issue by calling riscv_aplic_idc_update() to
update the IDC status after the iforce register is claimed.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240321104951.12104-1-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Change the for loops in ldst helpers to do a single increment in the
counter, and assign it env->vstart, to avoid re-reading from vstart
every time.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240314175704.478276-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The vstart_eq_zero flag is updated at the beginning of the translation
phase from the env->vstart variable. During the execution phase all
functions will set env->vstart = 0 after a successful execution, but the
vstart_eq_zero flag remains the same as at the start of the block. This
will wrongly cause SIGILLs in translations that requires env->vstart = 0
and might be reading vstart_eq_zero = false.
This patch adds a new finalize_rvv_inst() helper that is called at the
end of each vector instruction that will both update vstart_eq_zero and
do a mark_vs_dirty().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1976
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240314175704.478276-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
trans_vmv_v_i , trans_vfmv_v_f and the trans_##NAME macro from
GEN_VMV_WHOLE_TRANS() are calling mark_vs_dirty() in both branches of
their 'ifs'. conditionals.
Call it just once in the end like other functions are doing.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240314175704.478276-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All helpers that rely on vstart >= vl are now doing early exits using
the VSTART_CHECK_EARLY_EXIT() macro. This macro will not only exit the
helper but also clear vstart.
We're still left with brconds that are skipping the helper, which is the
only place where we're clearing vstart. The pattern goes like this:
tcg_gen_brcond_tl(TCG_COND_GEU, cpu_vstart, cpu_vl, over);
(... calls helper that clears vstart ...)
gen_set_label(over);
return true;
This means that every time we jump to 'over' we're not clearing vstart,
which is an oversight that we're doing across the board.
Instead of setting vstart = 0 manually after each 'over' jump, remove
those brconds that are skipping helpers. The exception will be
trans_vmv_s_x() and trans_vfmv_s_f(): they don't use a helper and are
already clearing vstart manually in the 'over' label.
While we're at it, remove the (vl == 0) brconds from trans_rvbf16.c.inc
too since they're unneeded.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240314175704.478276-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're going to make changes that will required each helper to be
responsible for the 'vstart' management, i.e. we will relieve the
'vstart < vl' assumption that helpers have today.
Helpers are usually able to deal with vstart >= vl, i.e. doing nothing
aside from setting vstart = 0 at the end, but the tail update functions
will update the tail regardless of vstart being valid or not. Unifying
the tail update process in a single function that would handle the
vstart >= vl case isn't trivial (see [1] for more info).
This patch takes a blunt approach: do an early exit in every single
vector helper if vstart >= vl, unless the helper is guarded with
vstart_eq_zero in the translation. For those cases the helper is ready
to deal with cases where vl might be zero, i.e. throwing exceptions
based on it like vcpop_m() and first_m().
Helpers that weren't changed:
- vcpop_m(), vfirst_m(), vmsetm(), GEN_VEXT_VIOTA_M(): these are guarded
directly with vstart_eq_zero;
- GEN_VEXT_VCOMPRESS_VM(): guarded with vcompress_vm_check() that checks
vstart_eq_zero;
- GEN_VEXT_RED(): guarded with either reduction_check() or
reduction_widen_check(), both check vstart_eq_zero;
- GEN_VEXT_FRED(): guarded with either freduction_check() or
freduction_widen_check(), both check vstart_eq_zero.
Another exception is vext_ldst_whole(), who operates on effective vector
length regardless of the current settings in vtype and vl.
[1] https://lore.kernel.org/qemu-riscv/1590234b-0291-432a-a0fa-c5a6876097bc@linux.alibaba.com/
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240314175704.478276-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 8ff8ac6329 added a conditional to guard the vext_ldst_whole()
helper if vstart >= evl. But by skipping the helper we're also not
setting vstart = 0 at the end of the insns, which is incorrect.
We'll move the conditional to vext_ldst_whole(), following in line with
the removal of all brconds vstart >= vl that the next patch will do. The
idea is to make the helpers responsible for their own vstart management.
Fix ldst_whole isns by:
- remove the brcond that skips the helper if vstart is >= evl;
- vext_ldst_whole() now does an early exit with the same check, where
evl = (vlenb * nf) >> log2_esz, but the early exit will also clear
vstart.
The 'width' param is now unneeded in ldst_whole_trans() and is also
removed. It was used for the evl calculation for the brcond and has no
other use now. The 'width' is reflected in vext_ldst_whole() via
log2_esz, which is encoded by GEN_VEXT_LD_WHOLE() as
"ctzl(sizeof(ETYPE))".
Suggested-by: Max Chou <max.chou@sifive.com>
Fixes: 8ff8ac6329 ("target/riscv: rvv: Add missing early exit condition for whole register load/store")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Message-ID: <20240314175704.478276-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These insns have 2 paths: we'll either have vstart already cleared if
vstart_eq_zero or we'll do a brcond to check if vstart >= maxsz to call
the 'vmvr_v' helper. The helper will clear vstart if it executes until
the end, or if vstart >= vl.
For starters, the check itself is wrong: we're checking vstart >= maxsz,
when in fact we should use vstart in bytes, or 'startb' like 'vmvr_v' is
calling, to do the comparison. But even after fixing the comparison we'll
still need to clear vstart in the end, which isn't happening too.
We want to make the helpers responsible to manage vstart, including
these corner cases, precisely to avoid these situations:
- remove the wrong vstart >= maxsz cond from the translation;
- add a 'startb >= maxsz' cond in 'vmvr_v', and clear vstart if that
happens.
This way we're now sure that vstart is being cleared in the end of the
execution, regardless of the path taken.
Fixes: f714361ed7 ("target/riscv: rvv-1.0: implement vstart CSR")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240314175704.478276-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
vmvr_v isn't handling the case where the host might be big endian and
the bytes to be copied aren't sequential.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: f714361ed7 ("target/riscv: rvv-1.0: implement vstart CSR")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240314175704.478276-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
trans_vmv_x_s, trans_vmv_s_x, trans_vfmv_f_s and trans_vfmv_s_f aren't
setting vstart = 0 after execution. This is usually done by a helper in
vector_helper.c but these functions don't use helpers.
We'll set vstart after any potential 'over' brconds, and that will also
mandate a mark_vs_dirty() too.
Fixes: dedc53cbc9 ("target/riscv: rvv-1.0: integer scalar move instructions")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240314175704.478276-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The helper isn't setting env->vstart = 0 after its execution, as it is
expected from every vector instruction that completes successfully.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20240314175704.478276-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 3b8022269c added the capability of named features/profile
extensions to be added in riscv,isa. To do that we had to assign priv
versions for each one of them in isa_edata_arr[]. But this resulted in a
side-effect: vendor CPUs that aren't running priv_version_latest started
to experience warnings for these profile extensions [1]:
| $ qemu-system-riscv32 -M sifive_e
| qemu-system-riscv32: warning: disabling zic64b extension for hart
0x00000000 because privilege spec version does not match
| qemu-system-riscv32: warning: disabling ziccamoa extension for
hart 0x00000000 because privilege spec version does not match
This is benign as far as the CPU behavior is concerned since disabling
both extensions is a no-op (aside from riscv,isa). But the warnings are
unpleasant to deal with, especially because we're sending user warnings
for extensions that users can't enable/disable.
Instead of enabling all named features all the time, separate them by
priv version. During finalize() time, after we decided which
priv_version the CPU is running, enable/disable all the named extensions
based on the priv spec chosen. This will be enough for a bug fix, but as
a future work we should look into how we can name these extensions in a
way that we don't need an explicit ext_name => priv_ver as we're doing
here.
The named extensions being added in isa_edata_arr[] that will be
enabled/disabled based solely on priv version can be removed from
riscv_cpu_named_features[]. 'zic64b' is an extension that can be
disabled based on block sizes so it'll retain its own flag and entry.
[1] https://lists.gnu.org/archive/html/qemu-devel/2024-03/msg02592.html
Reported-by: Clément Chigot <chigot@adacore.com>
Fixes: 3b8022269c ("target/riscv: add riscv,isa to named features")
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Clément Chigot <chigot@adacore.com>
Message-ID: <20240312203214.350980-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel P. Berrangé <berrange@redhat.com> pointed out that the coroutine
pool size heuristic is very conservative. Instead of halving
max_map_count, he suggested reserving 5,000 mappings for non-coroutine
users based on observations of guests he has access to.
Fixes: 86a637e481 ("coroutine: cap per-thread local pool size")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240320181232.1464819-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
an attempt to spawn child process is made
* Reduce priority of POLLHUP handling for socket chardevs
to increase likelihood of pending data being processed
* Fix chardev I/O main loop integration when TLS is enabled
* Fix broken crypto test suite when distro disables
SM4 algorithm
* Improve diagnosis of failed crypto tests
-----BEGIN PGP SIGNATURE-----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=4HKW
-----END PGP SIGNATURE-----
Merge tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu into staging
* Use EPERM for seccomp filter instead of killing QEMU when
an attempt to spawn child process is made
* Reduce priority of POLLHUP handling for socket chardevs
to increase likelihood of pending data being processed
* Fix chardev I/O main loop integration when TLS is enabled
* Fix broken crypto test suite when distro disables
SM4 algorithm
* Improve diagnosis of failed crypto tests
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmX585EACgkQvobrtBUQ
# T98TIg//ekc/f0JrRs68hjmo/vfcHWGHDMbZagj48zZNIn8DhJmQdt+qrCjMrMGW
# 353nTawFuF3EO9ju/eRLO54T+p1+a3zX8TyO4tL1W+RY9HARPeqssmFemDPfkMfQ
# IFGv0M0vaxGZpBna7jlXfDK/hCbJexKoChyT4eSF9H1Tp9o6T2J9AWvB5WTYLoQ2
# GzusDqBLKTkKhxMTCqevkFD/yCkgIQKlX8mG188PoJnGMqpGzQLTyw9lo5Npi1nE
# nhXa2MrrSfusk0rtwEzT14sQ58U+MF4fLQxUC+knNX81FSv8Q6QDu4Stfhwc+az7
# ynO4b/3IzK+VCICb2QM1ZNoTZNLcLfw1jdFTIAt8wiE+BMSySNQtdneURZOynydy
# Qd0alPNb4zfVRIGVjoOj38HiOmIKp5riIsUsI03jjBAgJu47tYRi60Tq2t6KxVoP
# rpDd5Vmsd0AR+7acO29rp0aLB+x2/ANDY+1N1Xi4tQdblmKIziHPZzx6H49wbwev
# 8Jdghg10RpbdqIGOfZ9fn13iCDO+1/gy6g/jTe2tMZrZsyov904tDqyUCDCzAbTz
# B8lvnr0LfSX2DYBryGEHIa/eMN2TxPuzpvZP0JFO1QxJnOs9w3aHr1T6A1sCV4a3
# JjTu71LsomNMXj3t3ImBHzMlgQZoL5Bxoh7b7jbLO4cvnhRbiJk=
# =4HKW
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Mar 2024 20:20:33 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu:
crypto: report which ciphers are being skipped during tests
crypto: use error_abort for unexpected failures
crypto: query gcrypt for cipher availability
crypto: factor out conversion of QAPI to gcrypt constants
Revert "chardev: use a child source for qio input source"
Revert "chardev/char-socket: Fix TLS io channels sending too much data to the backend"
chardev: lower priority of the HUP GSource in socket chardev
seccomp: report EPERM instead of killing process for spawn set
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "link_depends" key has not been used since commit c46f76d158
("meson: specify fuzz linker script as a project arg", 2020-09-08),
and even before that it was only used for fork-fuzzing which we
removed in commit d2e6f9272d ("fuzz: remove fork-fuzzing scaffolding",
2023-02-16).
So, remove it for a very small simplification of meson.build.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PAuth makes run timeout on CI so add tests using 'max' without
it and with impdef one.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240318-sbsa-ref-firmware-update-v3-4-1c33b995a538@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
PAuth makes run timeout on CI so add tests using 'max' without it
and with impdef one.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240318-sbsa-ref-firmware-update-v3-3-1c33b995a538@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
sbsa-ref is supposed to emulate real hardware so virtio-rng-pci
does not fit here
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-Id: <20240318-sbsa-ref-firmware-update-v3-2-1c33b995a538@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We now have CI job to build those and publish in space with
readable urls.
Firmware is built using Debian 'bookworm' cross toolchain (gcc 12.2.0).
Used versions:
- Trusted Firmware v2.10.2
- Tianocore EDK2 stable202402
- Tianocore EDK2 Platforms code commit 085c2fb
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240318-sbsa-ref-firmware-update-v3-1-1c33b995a538@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This avoids fetching blobs and tree references for branches we are not
going to worry about. Also skip tag references which are similarly not
useful and keep the default --prune. This keeps the .git data to
around 100M rather than the ~400M even a shallow clone takes.
So we can check the savings we also run a quick du while setting up
the build.
We also have to have special settings of GIT_FETCH_EXTRA_FLAGS for the
Windows build, the migration legacy test and the custom runners. In
the case of the custom runners we also move the free floating variable
to the runner template.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240312170011.1688444-1-alex.bennee@linaro.org>
rec->count.score is inside rec, which is freed before rec->count.score is.
Reorder the instructions
Reported by Coverity as CID 1539967.
Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
monitor_puts() doesn't check the monitor pointer, but do_inject_x86_mce()
may have a parameter with NULL monitor pointer. Revert monitor_puts() in
do_inject_x86_mce() to fix, then the fact that we send the same message to
monitor and log is again more obvious.
Fixes: bf0c50d4aa (monitor: expose monitor_puts to rest of code)
Reviwed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20240320083640.523287-1-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Building dbus-display1.c explicitly as a static library drops -fPIC by
default, which may not be correct if it ends up linked to a shared
library.
Let the target decide how to build the unit, with or without -fPIC. This
makes commit 186acfbaf7 ("tests/qtest: Depend on dbus_display1_dep") no
longer relevant, as dbus-display1.c will be recompiled.
Fixes: c172136ea33 ("meson: ensure dbus-display generated code is built
before other units")
Reported-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
ui/curses is the only user of console_select(). Move the implementation
to ui/curses.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240319-console-v2-4-3fd6feef321a@daynix.com>
ui/cocoa needs to update the UI info and reset the keyboard state
tracker when switching the console, or the new console will see the
stale UI info or keyboard state. Previously, updating the UI info was
done with cocoa_switch(), but it is meant to be called when the surface
is being replaced, and may be called even when not switching the
console. ui/cocoa never reset the keyboard state, which resulted in
stuck keys.
Add ui/cocoa's own implementation of console_select(), which updates the
UI info and resets the keyboard state tracker.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240319-console-v2-3-3fd6feef321a@daynix.com>
console_select() is shared by other displays and a console_select() call
from one of them triggers console switching also in ui/curses,
circumventing key state reinitialization that needs to be performed in
preparation and resulting in stuck keys.
Use its internal state to track the current active console to prevent
such a surprise console switch.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240319-console-v2-2-3fd6feef321a@daynix.com>
A chardev-vc used to inherit the size of a graphic console when its
size not explicitly specified, but it often did not make sense. If a
chardev-vc is instantiated during the startup, the active graphic
console has no content at the time, so it will have the size of graphic
console placeholder, which contains no useful information. It's better
to have the standard size of text console instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240319-console-v2-1-3fd6feef321a@daynix.com>
On gen_ll, if a->imm is zero, make_address_x return src1,
but the load to destination may clobber src1. We use a new
destination to fix this problem.
Fixes: c5af6628f4 (target/loongarch: Extract make_address_i() helper)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240320013955.1561311-1-gaosong@loongson.cn>
When we use qemu tcg simulation, the page size of bios is 4KB.
When using the level 2 super huge page (page size is 1G) to create the page table,
it is found that the content of the corresponding address space is abnormal,
resulting in the bios can not start the operating system and graphical interface normally.
The lddir and ldpte instruction emulation has
a problem with the use of super huge page processing above level 2.
The page size is not correctly calculated,
resulting in the wrong page size of the table entry found by tlb.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240318070332.1273939-1-lixianglai@loongson.cn>
Interrupt number in loop sentence should be base irq plus
loop index, it is missing on checking whether the irq
is pending.
Fixes: 428a6ef439 ("Add vmstate post_load support")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240313093932.2653518-1-maobibo@loongson.cn>
stdby,e,m was writing data from the wrong half of the register
into memory for cases 0-3.
Fixes: 25460fc5a7 ("target/hppa: Implement STDBY")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240319161921.487080-7-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
mfia should return only the iaoq bits without privilege
bits.
Fixes: 98a9cb792c ("target-hppa: Implement system and memory-management insns")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Message-Id: <20240319161921.487080-6-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the guest modifies the tb it is currently executing from,
it executes a fic instruction. Exit the tb on such instruction,
otherwise we might execute stale code.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20240319161921.487080-5-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
