The register being 32 bit long, after a shift to the right by 16 bits,
the upper 16 bit are already cleared. There is no need to call ext16u
to clear them.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
addv and subv helpers implementation is directly copied from the SH4
manual and looks quite complex. It is however possible to explain it
without branches, and is therefore possible to implement it with TCG.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is no need to add a SH4 specific pickNaNMulAdd() to softfloat as
SH4 is always returning a default NaN.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Unconditional gen_check_loop_end at the end of disas_xtensa_insn
can emit tcg_gen_goto_tb with slot id already used in the TB (e.g. when
TB ends at LEND with a branch).
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: malc <av1474@comtv.ru>
Commit e31b0a7c05 fixed copy propagation on
32-bit host by restricting the copy between different types. This was the
wrong fix.
The real problem is that the all temps states should be reset at the end
of a basic block. This was done by adding such operations in the switch,
but brcond2 was forgotten (that's why the crash was only observed on 32-bit
hosts).
Fix that by looking at the TCG_OPF_BB_END instead. We need to keep the case
for op_set_label as temps might be modified through another path.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implements all of the COP2 instructions except for the S<cond>
family of comparisons. The documentation is unclear for those.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
this will prevent some of the compilation errors with debugging
enabled from creeping back in.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The macro uses the DisasContext. Pass it around as needed.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Used by MIPS_DEBUG, when enabled.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Drop the private reimplementation of ctz32() from pflash_cfi0[12]
in favour of using the standard version from host-utils.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
pflash_cfi01 announces a version number of 1.1, which implies
"Protection Register Information" and "Burst Read information"
sections, which are not provided.
Decrease the version number to 1.0 so that only the "Protection
Register Information" section is needed.
Set the number of protection fields (0x3f) to 0x01, as 0x00 means 256
protections field, which makes the CFI table bigger than the current
implementation, causing some kernels to fail to read it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Given the copy propagation breakage on 32-bit hosts has been fixed
commit e31b0a7c05 can be reverted.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
set_label is effectively the end of a basic block, as no optimization
can be made accross it. It was treated as such in the liveness analysis
code, but as a special case.
Mark it with TCG_OPF_BB_END flag so that this information can be used
by other parts of the TCG code, and remove the special case in the liveness
analysis code.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On x86, it is possible to move a constant value to memory. Add code to
handle a constant argument to load/store ops.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There was a missing include of qemu-log and a variable name in a printf was out
of date.
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Assert that the ethernet and dma controller are sucessfully linked to their
peers.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
The "frequency" qdev prop matches the "clock-frequency" property in Xilinx EDK.
Renamed "frequency" -> "clock-frequency" accordingly.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
For architectures which don't set HAS_AUDIO_CHOICE, improve the
'-soundhw help' message so that it doesn't simply print an empty
list, implying no sound support at all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: malc <av1474@comtv.ru>
* kwolf/for-anthony:
block: Don't forget to delete temporary file
Don't require encryption password for 'qemu-img info' command
qemu-img: Add json output option to the info command.
qapi: Add SnapshotInfo and ImageInfo.
ahci: properly reset PxCMD on HBA reset
block: fix block tray status
vdi: Fix warning from clang
block/curl: Fix wrong free statement
ide: Fix error messages from static code analysis (no real error)
ATAPI: STARTSTOPUNIT only eject/load media if powercondition is 0
sheepdog: fix savevm and loadvm
* stefanha/trivial-patches:
configure: fix seccomp check
arch_init.c: add missing '%' symbols before PRIu64 in debug printfs
kvm: Fix warning from static code analysis
qapi: Fix enumeration typo error
console: Clean up bytes per pixel calculation
Fix copy&paste typos in documentation comments
linux-user: Remove #if 0'd cpu_get_real_ticks() definition
ui: Fix spelling in comment (ressource -> resource)
Spelling fixes in comments and macro names (ressource -> resource)
Fix spelling (licenced -> licensed) in GPL
Spelling fixes in comments and documentation
srp: Don't use QEMU_PACKED for single elements of a structured type
* stefanha/net:
net: EAGAIN handling for net/socket.c TCP
net: EAGAIN handling for net/socket.c UDP
net: asynchronous send/receive infrastructure for net/socket.c
net: broadcast hub packets if at least one port can receive
net: fix usbnet_receive() packet drops
net: clean up usbnet_receive()
net: add -netdev options to man page
net: do not report queued packets as sent
net: add receive_disabled logic to iov delivery path
eepro100: Fix network hang when rx buffers run out
xen: flush queue when getting an event
e1000: flush queue whenever can_receive can go from false to true
net: notify iothread after flushing queue
* qemu-kvm/uq/master:
kvm: Rename irqchip_inject_ioctl to irq_set_ioctl
kvm: Stop flushing coalesced MMIO on vmexit
VGA: Flush coalesced MMIO on related MMIO/PIO accesses
memory: Flush coalesced MMIO on mapping and state changes
memory: Fold memory_region_update_topology into memory_region_transaction_commit
memory: Use transaction_begin/commit also for single-step operations
memory: Flush coalesced MMIO on selected region access
kvm-all.c: Move init of irqchip_inject_ioctl out of kvm_irqchip_create()
update-linux-headers.sh: Don't hard code list of architectures
This reverts commit 66d5499b37.
This commit broke --target-list="x86_64-softmmu" and the fix isn't immediatley
obvious.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
cpu_physical_memory_write_rom(), despite the name, can also be used to
write images into RAM - and will often be used that way if the machine
uses load_image_targphys() into RAM addresses.
However, cpu_physical_memory_write_rom(), unlike cpu_physical_memory_rw()
doesn't invalidate any cached TBs which might be affected by the region
written.
This was breaking reset (under full emu) on the pseries machine - we loaded
our firmware image into RAM, and while executing it rewrite the code at
the entry point (correctly causing a TB invalidate/refresh). When we
reset the firmware image was reloaded, but the TB from the rewrite was
still active and caused us to get an illegal instruction trap.
This patch fixes the bug by duplicating the tb invalidate code from
cpu_physical_memory_rw() in cpu_physical_memory_write_rom().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
tcp_chr_connect(), unlike for example udp_chr_update_read_handler() does
not check if the fd it is using is valid (>= 0) before passing it to
qemu_set_fd_handler2(). If using e.g. a TCP serial port, which is not
initially connected, this can result in -1 being passed to FD_ISSET, which
has undefined behaviour. On x86 it seems to harmlessly return 0, but on
PowerPC, it causes a fortify buffer overflow error to be thrown.
This patch fixes this by putting an extra test in tcp_chr_connect(), and
also adds an assert qemu_set_fd_handler2() to catch other such errors on
all platforms, rather than just some.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit c3767ed0eb
qemu-char: (Re-)connect for tcp_chr_write() unconnected writing
Has no hope of working because tcp_chr_connect() does not actually connect.
455aa1e08 just fixes the SEGV with server() but the attempt to connect a client
socket is still completely broken.
This patch reverts both.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We have debugcon these days to listen on those ports that receive debug
messages. Also drop the others that have no effect anymore.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It allows to disable memory merge support (KSM on Linux), which is
enabled by default otherwise.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.
Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.
Remove unused HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an explicit CPUCRISState parameter instead of relying on AREG0, and
use cpu_ld* in translation and interrupt handling. Remove AREG0 swapping
in tlb_fill(). Switch to AREG0 free mode
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add an explicit CPUCRISState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Convert code load functions and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Convert remaining helpers to AREG0 free mode: add an explicit
CPUState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add an explicit CPUState parameter instead of relying on AREG0.
For easier review, convert only op helpers which don't return any value.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Tested-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Aurelien Jarno
Max Filippov
Richard Henderson
Peter Maydell
Chris Wulff
Peter A. G. Crosthwaite
Anthony Liguori
David Gibson
Jan Kiszka
Luiz Capitulino
Blue Swirl