The alignment is a characteristic of the ABI, not the CPU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Previously, this was done for target_long/ulong, and propagated to
abi_long/ulong via a typedef. But target_long/ulong should not
have any specific alignment, it is never used to access guest
memory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The alignment is a characteristic of the ABI, not the CPU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The alignment is a characteristic of the ABI, not the CPU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Configure to use the DTC submodule to build libfdt when no system libfdt
is found. Prompt to install the DTC submodule if --enable-fdt is set but
no DTC can be found.
DTC has no out-of-tree build capability, so the configure will symlink
the Makefile and scripts directory in the out of tree build directory
and pass in all the needed DTC arguments to make out of tree build happen.
Ideally we fix the DTC make to support out of tree, but did it this way to
avoid commits to DTC.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The cross compile CFLAGS are needed to properly build pixman (and any other
submodules). Only the EXTRA_CFLAGS set is passed to submodules not QEMU_CFLAGS,
so put the cross compile flags in EXTRA_CFLAGS instead.
Signed-off-by: Peter Crosthwaite peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This includes basic PCI support for the PC platform. Enough
abstraction should be present to support non-PC platforms too.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366123521-4330-3-git-send-email-aliguori@us.ibm.com
Reimplement usb-host on top of libusb.
Reasons to do this:
(1) Largely rewritten from scratch, nice opportunity to kill historical
cruft.
(2) Offload usbfs handling to libusb.
(3) Have a single portable code base instead of bsd + linux variants.
(4) Bring usb-host support to any platform supported by libusbx.
For now this goes side-by-side to the existing code. That is only to
simplify regression testing though, at the end of the day I want remove
the old code and support libusb exclusively. Merge early in 1.5 cycle,
remove the old code after 1.5 release or something like this.
Thanks to qdev the old and new code can coexist nicely on linux. Just
use "-device usb-host-linux" to use the old linux driver instead of the
libusb one (which takes over the "usb-host" name).
The bsd driver isn't qdev'ified so it isn't that easy for bsd.
I didn't bother making it runtime switchable, so you have to rebuild
qemu with --disable-libusb to get back the old code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* bonzini/hw-dirs:
exec: remove useless declarations from memory-internal.h
memory: move core typedefs to qemu/typedefs.h
include: avoid useless includes of exec/ headers
sysemu: avoid proliferation of include/ subdirectories
tpm: reorganize headers and split hardware part
configure: fix TPM logic
acpi.h: make it self contained
acpi: move declarations from pc.h to acpi.h
hw: Add lost ARM core again
Fix failure to create q35 machine
Add linux-headers to QEMU_INCLUDES
arm: fix location of some include files
Conflicts:
configure
aliguori: trivial conflict in configure output
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Glibc 2.16 includes an easy way to get feature bits previously
buried in /proc or the program startup auxiliary vector. Use it.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
A non-native i386 or x86_64 emulator should not have TPM passthrough
support, since the TPM is only present for those hosts.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio/dataplane/vring.c requires the Linux headers and is built for all
targets. So we need to add the corresponding include to QEMU_INCLUDES to
avoid that outdated distribution headers are used.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libssh2_sftp_fsync is an extension to libssh2 to support fsync(2) over
sftp, which is itself an extension of OpenSSH.
If both libssh2 and the ssh daemon support it, this will allow
bdrv_flush_to_disk to commit changes through to disk on the remote
server.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-system-x86_64 -drive file=ssh://hostname/some/image
QEMU will ssh into 'hostname' and open '/some/image' which is made
available as a standard block device.
You can specify a username (ssh://user@host/...) and/or a port number
(ssh://host:port/...). You can also use an alternate syntax using
properties (file.user, file.host, file.port, file.path).
Current limitations:
- Authentication must be done without passwords or passphrases, using
ssh-agent. Other authentication methods are not supported.
- Uses a single connection, instead of concurrent AIO with multiple
SSH connections.
This is implemented using libssh2 on the client side. The server just
requires a regular ssh daemon with sftp-server support. Most ssh
daemons on Unix/Linux systems will work out of the box.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The CONFIG_DEBUG_EXEC define compiles out a single qemu_log_mask()
call, which is a pretty trivial cost even for something in the main
cpu_exec() loop. Having this be conditionally defined means that
'-d exec' on a non-debug build will silently do nothing. Drop the
define and the configure machinery that sets it, in favour of just
always allowing this log option to be enabled at runtime. As a
concession to the mainloopiness, we use qemu_loglevel_mask()+qemu_log()
rather than qemu_log_mask() to avoid the function call overhead.
Note that DEBUG_DISAS is always defined, so removing the
'|| defined(CONFIG_DEBUG_EXEC)' from those conditionals makes
no behavioural change for that logging.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Paolo Bonzini
# Via Paolo Bonzini
* bonzini/hw-dirs: (35 commits)
hw: move private headers to hw/ subdirectories.
MAINTAINERS: update for source code movement
hw: move last file to hw/arm/
hw: move hw/kvm/ to hw/i386/kvm
hw: move ARM CPU cores to hw/cpu/, configure with default-configs/
hw: move other devices to hw/misc/, configure with default-configs/
hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/
hw: move GPIO interfaces to hw/gpio/, configure with default-configs/
hw: move interrupt controllers to hw/intc/, configure with default-configs/
hw: move DMA controllers to hw/dma/, configure with default-configs/
hw: move VFIO and ivshmem to hw/misc/
hw: move PCI bridges to hw/pci-* or hw/ARCH
hw: move SD/MMC devices to hw/sd/, configure with default-configs/
hw: move timer devices to hw/timer/, configure with default-configs/
hw: move ISA bridges and devices to hw/isa/, configure with default-configs/
hw: move char devices to hw/char/, configure via default-configs/
hw: move more files to hw/xen/
hw: move SCSI controllers to hw/scsi/, configure via default-configs/
hw: move SSI controllers to hw/ssi/, configure via default-configs/
hw: move I2C controllers to hw/i2c/, configure via default-configs/
...
Message-id: 1365442249-18259-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The gthread coroutine backend is broken and does not produce a working
QEMU; it is only useful for some very limited debugging situations.
Clean up the backend selection logic in configure so that it now runs
"if on windows use windows; else prefer ucontext; else sigaltstack".
To do this we refactor the configure code to separate out "test
whether we have a working ucontext", "pick a default if user didn't
specify" and "validate that user didn't specify something invalid",
rather than having all three of these run together. We also simplify
the Makefile logic so it just links in the backend the configure
script selects.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1365419487-19867-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Provide a convenience function for reporting an error and exiting,
and update various places in the configure script to use it.
This allows us to be a little more consistent about how format
our error messages and makes the calling code shorter.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1365419487-19867-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These variables have not been set for a long time. Do not
include them in config-host.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1364918276-11866-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Dunrong Huang (1) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
hw/tcx: Remove unused 'addr' field and the property that sets it
hw/i386/pc: format load_linux function
configure: show debug-info option in --help output
The cross i586-mingw32msvc-gcc 4.4.4 from Debian Squeeze does not support
__sync_val_compare_and_swap by default.
Using -march=i686 fixes that and should also result in better code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
"--enable-debug-info" and "--disable-debug-info" were not shown
in --help output.
Signed-off-by: Dunrong Huang <huangdr@cloud-times.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The configure script allows you to supply a libdir via --libdir but was
not advertising this in --help.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
CC: qemu-trivial@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As the probe now actually checks for the availability of GLX, rename it
accordingly. The only user of this feature is the milkymist-tmu2 model.
Signed-off-by: Michael Walle <michael@walle.cc>
Probe for GL and GLX symbols and X11 library. This fixes a build error
where the header files are available but the libraries are not.
Signed-off-by: Michael Walle <michael@walle.cc>
# By Peter Maydell (5) and others
# Via Riku Voipio
* riku/linux-user-for-upstream:
linux-user/syscall.c: Don't warn about unimplemented get_robust_list
linux-user: Implement accept4
linux-user: Implement sendfile and sendfile64
linux-user: make bogus negative iovec lengths fail EINVAL
linux-user: Fix layout of usage table to account for option text
linux-user: Add more sparc syscall numbers
linux-user: Support setgroups syscall with no groups
linux-user: fix futex strace of FUTEX_CLOCK_REALTIME
linux-user/syscall.c: handle FUTEX_WAIT_BITSET in do_futex
linux-user: improve print_fcntl()
linux-user: Add Alpha socket constants
Build the TPM frontend code that has been added so far.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-5-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement the sendfile and sendfile64 syscalls. This implementation
passes all the LTP test cases for these syscalls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Conflicts:
backends/baum.c
backends/msmouse.c
hw/a15mpcore.c
hw/arm/Makefile.objs
hw/arm/pic_cpu.c
hw/dataplane/event-poll.c
hw/dataplane/virtio-blk.c
include/char/baum.h
include/char/msmouse.h
qemu-char.c
vl.c
Resolve conflicts caused by header movements.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Lei Li (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
Fix the wrong description in qemu manual
pci_host: Drop write-only address_space field
rng-random: Use qemu_open / qemu_close
configure: Require at least spice-protocol-0.12.3
osdep: replace setsockopt by qemu_setsockopt
lm32: remove unused function
rtc-test: Fix test failures with recent glib
configure: Create link to icon bitmap for out-of-tree builds
As of 5a49d3e9 we assume SPICE_PORT_EVENT_BREAK to be defined.
However, it is defined not in 0.12.2 what we require now, but in
0.12.3. Therefore in order to prevent build failure we must
adjust our minimal requirements.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows to pick up the icon when starting QEMU directly from an
out-of-tree build directory.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Due to library conflicts, Fedora will have to put libiscsi in
/usr/lib/iscsi. Simplify configuration by using a pkg-config
file. The Fedora package will distribute one, and the patch
to add it has been sent to upstream libiscsi as well.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* 'target-arm.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
MAINTAINERS: add entry for ARM KVM guest cores
configure: Enable KVM on ARM
hw/kvm/arm_gic: Implement support for KVM in-kernel ARM GIC
target-arm: Use MemoryListener to identify GIC base address for KVM
hw/arm_gic: Convert ARM GIC classes to use init/realize
hw/arm_gic: Add presave/postload hooks
ARM KVM: save and load VFP registers from kernel
ARM: KVM: Add support for KVM on ARM architecture
target-arm: Drop CPUARMState* argument from bank_number()
linux-headers: resync from mainline to add ARM KVM headers
oslib-posix: Align to permit transparent hugepages on ARM Linux
target-arm: Don't decode RFE or SRS on M profile cores
target-arm: Factor out handling of SRS instruction
N32 is a 64-bit cpu with a 32-bit address space. We have
existing cpp defines for this situation, but weren't using them.
This does mean that the linux-user/mipsn32 directory must be
merged with the linux-user/mips64 directory, and differences
must be resolved via ifdefs.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
At this point we can enable compilation, though things
still don't work.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Enable KVM on ARM hosts, now that all the necessary components
for it exist.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Add a arg to configure to switch from GTK2 (default) to
GTK3 (optional) build for QEMU.
./configure --with-gtkabi=3.0
will choose GTK3, while
./configure --with-gtkabi=2.0
will choose GTK2 (and remains the current default)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1361805646-6425-12-git-send-email-berrange@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is needed for current Debian stable (Squeeze).
VTE versions before 0.26 did not support VtePty.
Lower the version requirement and use alternate code which works for Debian.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1361560199-28906-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
One part of this patch reverts commit 22bc9a46, which disabled the
warning. The rest of it deals with the warning by adding a #pragma for
newer gcc and by disabling -Werror for compilers that can't deal with
the #pragma.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1361563731-13307-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This gives us the bare amount of features we need. We can add work arounds
for older versions and lower the requirement but this should be a good
starting point.
Suggested-by: Daniel Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- tremendous simplification suggested by danpb
This includes a de_DE translation from Kevin Wolf and an it translation from
Paolo Bonzini.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-8-git-send-email-aliguori@us.ibm.com
This is minimalistic and just contains the basic widget infrastructure. The GUI
consists of a menu and a GtkNotebook. To start with, the notebook has its tabs
hidden which provides a UI that looks very similar to SDL with the exception of
the menu bar.
The menu bar allows a user to toggle the visibility of the tabs. Cairo is used
for rendering.
I used gtk-vnc as a reference. gtk-vnc solves the same basic problems as QEMU
since it was originally written as a remote display for QEMU. So for the most
part, the approach to rendering and keyboard handling should be pretty solid for
GTK.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-4-git-send-email-aliguori@us.ibm.com
GTK won't build with strict-prototypes due to gtkitemfactory.h:
/* We use () here to mean unspecified arguments. This is deprecated
* as of C99, but we can't change it without breaking compatibility.
* (Note that if we are included from a C++ program () will mean
* (void) so an explicit cast will be needed.)
*/
typedef void (*GtkItemFactoryCallback) ();
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-2-git-send-email-aliguori@us.ibm.com
The code handling the "-usbdevice host:..." legacy command line
syntax is moved to the new hw/usb/host-legacy.c file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace some x86_64 specific inline assembly with something that
all 64-bit hosts ought to optimize well. At worst this becomes
a call to the gcc __multi3 routine, which is no worse than our
implementation in util/host-utils.c.
With gcc 4.7, we get identical code generation for x86_64. We
now get native multiplication on ia64 and s390x hosts. With minor
improvements to gcc we can get it for ppc64 as well.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The build is broken on ppc64-linux, possibly only with new binutils:
ld: hw/lm32/../milkymist-tmu2.o: undefined reference to symbol 'XFree'
ld: note: 'XFree' is defined in DSO /lib64/libX11.so.6 so try \
adding it to the linker command line
So let's follow the linker's advice.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The automatic drop of -Werror during the RC phases has in the past led
to warnings creeping into submaintainer trees.
Last QEMU Summit it was concluded that -Werror should stay on and
enabled only as part of the release process.
To relieve our release manager, instead of always enabling -Werror or
doing some number magic, let's enable it depending on whether a .git/
directory exists in the source tree.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now, if seccomp is detected, it is linked into every executable,
but is used only by softmmu targets (from vl.c). So link it
only where it is actually needed.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds basic Websocket Protocol version 13 - RFC 6455 - support
to QEMU VNC. Binary encoding support on the client side is mandatory.
Because of the GnuTLS requirement the Websockets implementation is
optional (--enable-vnc-ws).
To activate Websocket support the VNC option "websocket"is used, for
example "-vnc :0,websocket".
The listen port for Websocket connections is (5700 + display) so if
QEMU VNC is started with :0 the Websocket port would be 5700.
As an alternative the Websocket port could be manually specified by
using ",websocket=<port>" instead.
Parts of the implementation base on Anthony Liguori's QEMU Websocket
patch from 2010 and on Joel Martin's LibVNC Websocket implementation.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Static linkikng against ncurses may require explicit -ltinfo.
In case -lcurses and -lncurses both didn't work give pkg-config a
chance.
Fixes#1094786 for me.
Signed-off-by: Vadim Evard <v.e.evard@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Linux 2.6.38 introduced the filesystem independent interface to
deallocate part of a file. As of Linux 3.7, btrfs, ext4, ocfs2,
tmpfs and xfs support it.
Even though the system calls here are in practice issued on Linux,
the code is structured to allow plugging in alternatives for other Unix
variants. EOPNOTSUPP is used unconditionally in this patch, but it is
supported in both OpenBSD and Mac OS X since forever (see for example
http://lists.debian.org/debian-glibc/2006/02/msg00337.html).
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Store --extra-cflags and --extra-ldflags in config-host.mak,
then pass them on to the pixman configure script.
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Build option ROM .S files with separate preprocessor and
assembler steps because the C compiler could be unsuitable.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* stefanha/trivial-patches:
hw/pc.c: Fix converting of ioport_register* to MemoryRegion
Replace remaining gmtime, localtime by gmtime_r, localtime_r
savevm: Remove MinGW specific code which is no longer needed
qga/channel-posix.c: Explicitly include string.h
configure: Fix comment (copy+paste bug)
readline: avoid memcpy() of overlapping regions
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Buffered bulk mode is intended for bulk *input* endpoints, where the data is
of a streaming nature (not part of a command-response protocol). These
endpoints' input buffer may overflow if data is not read quickly enough.
So in buffered bulk mode the usb-host takes care of the submitting and
re-submitting of bulk transfers.
Buffered bulk mode is necessary for reliable operation with the bulk in
endpoints of usb to serial convertors. Unfortunatelty buffered bulk input
mode will only work with certain devices, therefor this patch also adds a
usb-id table to enable it for devices which need it, while leaving the
bulk ep handling for other devices unmodified.
Note that the bumping of the required usbredir from 0.5.3 to 0.6 does
not mean that we will now need a newer usbredir release then qemu-1.3,
.pc files reporting 0.5.3 have only ever existed in usbredir builds directly
from git, so qemu-1.3 needs the 0.6 release too.
Changes in v2:
-Split of quirk handling into quirks.c
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for compiling for GCOV test coverage, enabled
with '--enable-gcov' during configure.
Test coverage will be reported after each test.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
commit 9b9c37c364 always assume sparcv9,
the others are no longer supported. Remove --sparc_cpu option from the
configure list.
Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Incremental builds added new lines to that file each time when configure
was run.
Now a new file with a comment line is written.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The virtio-blk-data-plane feature only works with Linux AIO. Therefore
add a ./configure option and necessary checks to implement this
dependency.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Existing compile-time detection is spotty at best. Convert
it all to runtime detection instead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When we build neither any system emulation targets nor the tools there
is actually no need for pixman library. In that case do not enforce
presence of that library on the system.
Reviewed-by: Andreas F=E4rber <afaerber@suse.de>
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vnc-tls.h is included by vnc.h, and it includes gnutls/gnutls.h.
Hence, GnuTLS header files are needed by all files that include
vnc.h, most notably qmp.c. Move these flags to QEMU_CFLAGS for
simplicity.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* bonzini/header-dirs: (45 commits)
janitor: move remaining public headers to include/
hw: move executable format header files to hw/
fpu: move public header file to include/fpu
softmmu: move remaining include files to include/ subdirectories
softmmu: move include files to include/sysemu/
misc: move include files to include/qemu/
qom: move include files to include/qom/
migration: move include files to include/migration/
monitor: move include files to include/monitor/
exec: move include files to include/exec/
block: move include files to include/block/
qapi: move include files to include/qobject/
janitor: add guards to headers
qapi: make struct Visitor opaque
qapi: remove qapi/qapi-types-core.h
qapi: move inclusions of qemu-common.h from headers to .c files
ui: move files to ui/ and include/ui/
qemu-ga: move qemu-ga files to qga/
net: reorganize headers
net: move net.c to net/
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Probe pkg-config before it is used for the first time (libseccomp check).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commit 288fa40736.
The only reason old pixman versions didn't work was the missing
PIXMAN_TYPE_BGRA, which is properly #ifdef'ed now. So we don't
have to require a minimum pixman version.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Default to 'cc' as our compiler, rather than 'gcc'. We used to have
to insist on gcc when we still kept the CPU env in a fixed global
register, but this is no longer necessary and we will now compile OK
on clang as well as gcc. Using 'cc' should generally result in us
using the most standard and maintained system compiler for the
platform. (For instance on newer MacOS X 'gcc' exists but is an
elderly compiler provided mostly for legacy reasons, and 'cc'
(which is clang) is definitely the better choice.) On Linux there
will generally be no user-visible change since cc will be gcc.
This changeover necessitates a slight reworking of how we set the
'cc' variable, because GNU cross toolchains generally provide a
'${cross_prefix}gcc' but not a '${cross_prefix}cc'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When older versions are found the internal pixman version is prefered.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rather than printing a message saying we're silently falling
back to gthread coroutines when running on MacOS, actually
do it silently.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These versions of GCC require insane (>2GB) amounts of memory to compile
translate.o. As a countermeasure, disable the culprit optimization pass.
This should fix the buildbot failure for default_x86_64_fedora16. Anyway
this is a good thing to do because people will try to compile 1.3 with
less than 2GB of memory and complain.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 32761257c0 enabled
qemu_ld/st optimization unconditionally for some hosts.
The TCG interpreter still does not support this kind of
optimization. Therefore builds with TCI fail with an
unresolved symbol tcg_out_tb_finalize. This is fixed here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Set --host when calling pixman configure while doing cross builds so
pixman's autoconf picks up the cross build tools correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
