Commit Graph

155 Commits

Author SHA1 Message Date
Peter Maydell
845d27a913 hw/intc/armv7m_nvic: for v8.1M VECTPENDING hides S exceptions from NS
In Arm v8.1M the VECTPENDING field in the ICSR has new behaviour: if
the register is accessed NonSecure and the highest priority pending
enabled exception (that would be returned in the VECTPENDING field)
targets Secure, then the VECTPENDING field must read 1 rather than
the exception number of the pending exception. Implement this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-7-peter.maydell@linaro.org
2021-07-27 10:57:39 +01:00
Peter Maydell
7caad65756 hw/intc/armv7m_nvic: Correct size of ICSR.VECTPENDING
The VECTPENDING field in the ICSR is 9 bits wide, in bits [20:12] of
the register.  We were incorrectly masking it to 8 bits, so it would
report the wrong value if the pending exception was greater than 256.
Fix the bug.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-6-peter.maydell@linaro.org
2021-07-27 10:57:39 +01:00
Peter Maydell
41487794f5 hw/intc/armv7m_nvic: ISCR.ISRPENDING is set for non-enabled pending interrupts
The ISCR.ISRPENDING bit is set when an external interrupt is pending.
This is true whether that external interrupt is enabled or not.
This means that we can't use 's->vectpending == 0' as a shortcut to
"ISRPENDING is zero", because s->vectpending indicates only the
highest priority pending enabled interrupt.

Remove the incorrect optimization so that if there is no pending
enabled interrupt we fall through to scanning through the whole
interrupt array.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-5-peter.maydell@linaro.org
2021-07-27 10:57:39 +01:00
Peter Maydell
a25c84c7e0 hw/intc/armv7m_nvic: Remove stale comment
In commit da6d674e50 we split the NVIC code out from the GIC.
This allowed us to specify the NVIC's default value for the num-irq
property (64) in the usual way in its property list, and we deleted
the previous hack where we updated the value in the state struct in
the instance init function.  Remove a stale comment about that hack
which we forgot to delete at that time.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614161243.14211-1-peter.maydell@linaro.org
2021-06-15 16:18:48 +01:00
Thomas Huth
2068cabd3f Do not include cpu.h if it's not really necessary
Stop including cpu.h in files that don't need it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:51 +02:00
Peter Maydell
5b7d63706e hw/intc/armv7m_nvic: Correct handling of CCR.BFHFNMIGN
The CCR is a register most of whose bits are banked between security
states but where BFHFNMIGN is not, and we keep it in the non-secure
entry of the v7m.ccr[] array.  The logic which tries to handle this
bit fails to implement the "RAZ/WI from Nonsecure if AIRCR.BFHFNMINS
is zero" requirement; correct the omission.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201210201433.26262-2-peter.maydell@linaro.org
2021-01-08 15:13:38 +00:00
Peter Maydell
6ba430b58a hw/intc/armv7m_nvic: Implement read/write for RAS register block
The RAS feature has a block of memory-mapped registers at offset
0x5000 within the PPB.  For a "minimal RAS" implementation we provide
no error records and so the only registers that exist in the block
are ERRIIDR and ERRDEVID.

The "RAZ/WI for privileged, BusFault for nonprivileged" behaviour
of the "nvic-default" region is actually valid for minimal-RAS,
so the main benefit of providing an explicit implementation of
the register block is more accurate LOG_UNIMP messages, and a
framework for where we could add a real RAS implementation later
if necessary.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-27-peter.maydell@linaro.org
2020-12-10 11:44:56 +00:00
Peter Maydell
46f4976f22 target/arm: Implement M-profile "minimal RAS implementation"
For v8.1M the architecture mandates that CPUs must provide at
least the "minimal RAS implementation" from the Reliability,
Availability and Serviceability extension. This consists of:
 * an ESB instruction which is a NOP
   -- since it is in the HINT space we need only add a comment
 * an RFSR register which will RAZ/WI
 * a RAZ/WI AIRCR.IESB bit
   -- the code which handles writes to AIRCR does not allow setting
      of RES0 bits, so we already treat this as RAZ/WI; add a comment
      noting that this is deliberate
 * minimal implementation of the RAS register block at 0xe0005000
   -- this will be in a subsequent commit
 * setting the ID_PFR0.RAS field to 0b0010
   -- we will do this when we add the Cortex-M55 CPU model

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-26-peter.maydell@linaro.org
2020-12-10 11:44:56 +00:00
Peter Maydell
194cde6df2 hw/intc/armv7m_nvic: Fix "return from inactive handler" check
In commit 077d744910 we added code to handle the v8M
requirement that returns from NMI or HardFault forcibly deactivate
those exceptions regardless of what interrupt the guest is trying to
deactivate.  Unfortunately this broke the handling of the "illegal
exception return because the returning exception number is not
active" check for those cases.  In the pseudocode this test is done
on the exception the guest asks to return from, but because our
implementation was doing this in armv7m_nvic_complete_irq() after the
new "deactivate NMI/HardFault regardless" code we ended up doing the
test on the VecInfo for that exception instead, which usually meant
failing to raise the illegal exception return fault.

In the case for "configurable exception targeting the opposite
security state" we detected the illegal-return case but went ahead
and deactivated the VecInfo anyway, which is wrong because that is
the VecInfo for the other security state.

Rearrange the code so that we first identify the illegal return
cases, then see if we really need to deactivate NMI or HardFault
instead, and finally do the deactivation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-25-peter.maydell@linaro.org
2020-12-10 11:44:56 +00:00
Peter Maydell
0e83f905fb hw/intc/armv7m_nvic: Support v8.1M CCR.TRD bit
v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
This bit is not banked, and is always RAZ/WI to Non-secure code.
Adjust the code for handling CCR reads and writes to handle this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-23-peter.maydell@linaro.org
2020-12-10 11:44:56 +00:00
Peter Maydell
cb45adb654 target/arm: Implement v8.1M REVIDR register
In v8.1M a REVIDR register is defined, which is at address 0xe00ecfc
and is a read-only IMPDEF register providing implementation specific
minor revision information, like the v8A REVIDR_EL1. Implement this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-19-peter.maydell@linaro.org
2020-12-10 11:44:56 +00:00
Peter Maydell
99c7834fba hw/intc/armv7m_nvic: Update FPDSCR masking for v8.1M
The FPDSCR register has a similar layout to the FPSCR.  In v8.1M it
gains new fields FZ16 (if half-precision floating point is supported)
and LTPSIZE (always reads as 4).  Update the reset value and the code
that handles writes to this register accordingly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-16-peter.maydell@linaro.org
2020-12-10 11:44:55 +00:00
Peter Maydell
a724377a11 hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault
For M-profile CPUs, the range from 0xe0000000 to 0xe00fffff is the
Private Peripheral Bus range, which includes all of the memory mapped
devices and registers that are part of the CPU itself, including the
NVIC, systick timer, and debug and trace components like the Data
Watchpoint and Trace unit (DWT).  Within this large region, the range
0xe000e000 to 0xe000efff is the System Control Space (NVIC, system
registers, systick) and 0xe002e000 to 0exe002efff is its Non-secure
alias.

The architecture is clear that within the SCS unimplemented registers
should be RES0 for privileged accesses and generate BusFault for
unprivileged accesses, and we currently implement this.

It is less clear about how to handle accesses to unimplemented
regions of the wider PPB.  Unprivileged accesses should definitely
cause BusFaults (R_DQQS), but the behaviour of privileged accesses is
not given as a general rule.  However, the register definitions of
individual registers for components like the DWT all state that they
are RES0 if the relevant component is not implemented, so the
simplest way to provide that is to provide RAZ/WI for the whole range
for privileged accesses.  (The v7M Arm ARM does say that reserved
registers should be UNK/SBZP.)

Expand the container MemoryRegion that the NVIC exposes so that
it covers the whole PPB space. This means:
 * moving the address that the ARMV7M device maps it to down by
   0xe000 bytes
 * moving the off and the offsets within the container of all the
   subregions forward by 0xe000 bytes
 * adding a new default MemoryRegion that covers the whole container
   at a lower priority than anything else and which provides the
   RAZWI/BusFault behaviour

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-2-peter.maydell@linaro.org
2020-12-10 11:44:55 +00:00
Peter Maydell
d20c3ebda2 hw/intc/armv7m_nvic: Only show ID register values for Main Extension CPUs
M-profile CPUs only implement the ID registers as guest-visible if
the CPU implements the Main Extension (all our current CPUs except
the Cortex-M0 do).

Currently we handle this by having the Cortex-M0 leave the ID
register values in the ARMCPU struct as zero, but this conflicts with
our design decision to make QEMU behaviour be keyed off ID register
fields wherever possible.

Explicitly code the ID registers in the NVIC to return 0 if the Main
Extension is not implemented, so we can make the M0 model set the
ARMCPU struct fields to obtain the correct behaviour without those
values becoming guest-visible.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-4-peter.maydell@linaro.org
2020-10-01 15:31:00 +01:00
Peter Maydell
8a130a7be6 target/arm: Move id_pfr0, id_pfr1 into ARMISARegisters
Move the id_pfr0 and id_pfr1 fields into the ARMISARegisters
sub-struct. We're going to want id_pfr1 for an isar_features
check, and moving both at the same time avoids an odd
inconsistency.

Changes other than the ones to cpu.h and kvm64.c made
automatically with:
  perl -p -i -e 's/cpu->id_pfr/cpu->isar.id_pfr/' target/arm/*.c hw/intc/armv7m_nvic.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-3-peter.maydell@linaro.org
2020-10-01 15:31:00 +01:00
Liao Pingfang
830b925094 hw: Remove superfluous breaks
Remove superfluous breaks, as there is a "return" before them.

Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1594631126-36631-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-01 08:38:00 +02:00
Peter Maydell
9e60d759d3 hw/intc/armv7m_nvic: Provide default "reset the system" behaviour for SYSRESETREQ
The NVIC provides an outbound qemu_irq "SYSRESETREQ" which it signals
when the guest sets the SYSRESETREQ bit in the AIRCR register.  This
matches the hardware design (where the CPU has a signal of this name
and it is up to the SoC to connect that up to an actual reset
mechanism), but in QEMU it mostly results in duplicated code in SoC
objects and bugs where SoC model implementors forget to wire up the
SYSRESETREQ line.

Provide a default behaviour for the case where SYSRESETREQ is not
actually connected to anything: use qemu_system_reset_request() to
perform a system reset.  This will allow us to remove the
implementations of SYSRESETREQ handling from the boards where that's
exactly what it does, and also fixes the bugs in the board models
which forgot to wire up the signal:

 * microbit
 * mps2-an385
 * mps2-an505
 * mps2-an511
 * mps2-an521
 * musca-a
 * musca-b1
 * netduino
 * netduinoplus2

We still allow the board to wire up the signal if it needs to, in case
we need to model more complicated reset controller logic or to model
buggy SoC hardware which forgot to wire up the line itself. But
defaulting to "reset the system" is more often going to be correct
than defaulting to "do nothing".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200728103744.6909-3-peter.maydell@linaro.org
2020-08-03 17:55:03 +01:00
Markus Armbruster
668f62ec62 error: Eliminate error_propagate() with Coccinelle, part 1
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away.  Convert

    if (!foo(..., &err)) {
        ...
        error_propagate(errp, err);
        ...
        return ...
    }

to

    if (!foo(..., errp)) {
        ...
        ...
        return ...
    }

where nothing else needs @err.  Coccinelle script:

    @rule1 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
         if (
    (
    -        fun(args, &err, args2)
    +        fun(args, errp, args2)
    |
    -        !fun(args, &err, args2)
    +        !fun(args, errp, args2)
    |
    -        fun(args, &err, args2) op c1
    +        fun(args, errp, args2) op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    )
         }

    @rule2 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    expression var;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
    -    var = fun(args, &err, args2);
    +    var = fun(args, errp, args2);
         ... when != err
         if (
    (
             var
    |
             !var
    |
             var op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    |
             return var;
    )
         }

    @depends on rule1 || rule2@
    identifier err;
    @@
    -    Error *err = NULL;
         ... when != err

Not exactly elegant, I'm afraid.

The "when != lbl:" is necessary to avoid transforming

         if (fun(args, &err)) {
             goto out
         }
         ...
     out:
         error_propagate(errp, err);

even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().

Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly.  I don't know what exactly "when strict" does, only that
it helps here.

The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err".  For
an example where it's too narrow, see vfio_intx_enable().

Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there.  Converted manually.

Line breaks tidied up manually.  One nested declaration of @local_err
deleted manually.  Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
118bfd76c9 qdev: Use returned bool to check for qdev_realize() etc. failure
Convert

    foo(..., &err);
    if (err) {
        ...
    }

to

    if (!foo(..., &err)) {
        ...
    }

for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their
wrappers isa_realize_and_unref(), pci_realize_and_unref(),
sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref().
Coccinelle script:

    @@
    identifier fun = {
        isa_realize_and_unref, pci_realize_and_unref, qbus_realize,
        qdev_realize, qdev_realize_and_unref, sysbus_realize,
        sysbus_realize_and_unref, usb_realize_and_unref
    };
    expression list args, args2;
    typedef Error;
    Error *err;
    @@
    -    fun(args, &err, args2);
    -    if (err)
    +    if (!fun(args, &err, args2))
         {
             ...
         }

Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information".  Nothing to convert there; skipped.

Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Converted manually.

A few line breaks tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-5-armbru@redhat.com>
2020-07-10 15:01:06 +02:00
Markus Armbruster
5a147c8c51 sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 3
These are init/realize pairs produced by the previous commit's
Coccinelle script where the argument test doesn't quite match.  They
need even more careful review.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-50-armbru@redhat.com>
2020-06-15 22:06:04 +02:00
Markus Armbruster
0074fce61f sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1
I'm converting from qdev_set_parent_bus()/realize to qdev_realize();
recent commit "qdev: Convert uses of qdev_set_parent_bus() with
Coccinelle" explains why.

sysbus_init_child_obj() is a wrapper around
object_initialize_child_with_props() and qdev_set_parent_bus().  It
passes no properties.

Convert sysbus_init_child_obj()/realize to object_initialize_child()/
qdev_realize().

Coccinelle script:

    @@
    expression parent, name, size, type, errp;
    expression child;
    symbol true;
    @@
    -    sysbus_init_child_obj(parent, name, &child, size, type);
    +    sysbus_init_child_XXX(parent, name, &child, size, type);
         ...
    -    object_property_set_bool(OBJECT(&child), true, "realized", errp);
    +    sysbus_realize(SYS_BUS_DEVICE(&child), errp);

    @@
    expression parent, name, size, type, errp;
    expression child;
    symbol true;
    @@
    -    sysbus_init_child_obj(parent, name, child, size, type);
    +    sysbus_init_child_XXX(parent, name, child, size, type);
         ...
    -    object_property_set_bool(OBJECT(child), true, "realized", errp);
    +    sysbus_realize(SYS_BUS_DEVICE(child), errp);

    @@
    expression parent, name, size, type;
    expression child;
    expression dev;
    expression expr;
    @@
    -    sysbus_init_child_obj(parent, name, child, size, type);
    +    sysbus_init_child_XXX(parent, name, child, size, type);
         ...
         dev = DEVICE(child);
         ... when != dev = expr;
    -    qdev_init_nofail(dev);
    +    sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);

    @@
    expression parent, propname, type;
    expression child;
    @@
    -    sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type)
    +    object_initialize_child(parent, propname, child, type)

    @@
    expression parent, propname, type;
    expression child;
    @@
    -    sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type)
    +    object_initialize_child(parent, propname, &child, type)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-48-armbru@redhat.com>
2020-06-15 22:06:04 +02:00
Peter Maydell
8c4985298f hw/intc/armv7m_nvic: Rebuild hflags on reset
Some of an M-profile CPU's cached hflags state depends on state that's
in our NVIC object. We already do an hflags rebuild when the NVIC
registers are written, but we also need to do this on NVIC reset,
because there's no guarantee that this will happen before the
CPU reset.

This fixes an assertion due to mismatched hflags which happens if
the CPU is reset from inside a HardFault handler.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200303174950.3298-2-peter.maydell@linaro.org
2020-03-12 16:01:37 +00:00
Richard Henderson
7fbc6a403a target/arm: Add isar_feature_aa32_vfp_simd
Use this in the places that were checking ARM_FEATURE_VFP, and
are obviously testing for the existance of the register set
as opposed to testing for some particular instruction extension.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200224222232.13807-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28 16:14:57 +00:00
Peter Maydell
10054016ed target/arm: Test correct register in aa32_pan and aa32_ats1e1 checks
The isar_feature_aa32_pan and isar_feature_aa32_ats1e1 functions
are supposed to be testing fields in ID_MMFR3; but a cut-and-paste
error meant we were looking at MVFR0 instead.

Fix the functions to look at the right register; this requires
us to move at least id_mmfr3 to the ARMISARegisters struct; we
choose to move all the ID_MMFRn registers for consistency.

Fixes: 3d6ad6bb46
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214175116.9164-19-peter.maydell@linaro.org
2020-02-21 16:07:02 +00:00
Peter Maydell
a617953855 target/arm: Define an aa32_pmu_8_1 isar feature test function
Instead of open-coding a check on the ID_DFR0 PerfMon ID register
field, create a standardly-named isar_feature for "does AArch32 have
a v8.1 PMUv3" and use it.

This entails moving the id_dfr0 field into the ARMISARegisters struct.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-9-peter.maydell@linaro.org
2020-02-21 16:07:01 +00:00
Marc-André Lureau
4f67d30b5e qdev: set properties with device_class_set_props()
The following patch will need to handle properties registration during
class_init time. Let's use a device_class_set_props() setter.

spatch --macro-file scripts/cocci-macro-file.h  --sp-file
./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place
--dir .

@@
typedef DeviceClass;
DeviceClass *d;
expression val;
@@
- d->props = val
+ device_class_set_props(d, val)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:15 +01:00
Richard Henderson
080f2730cd target/arm: Rebuild hflags for M-profile NVIC
Continue setting, but not relying upon, env->hflags.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24 17:16:28 +01:00
Tony Nguyen
d5d680cacc memory: Access MemoryRegion with endianness
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.

Call memory_region_dispatch_{read|write} with endianness encoded into
the "MemOp op" operand.

This patch does not change any behaviour as
memory_region_dispatch_{read|write} is yet to handle the endianness.

Once it does handle endianness, callers with byte swaps can collapse
them into adjust_endianness.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <8066ab3eb037c0388dfadfe53c5118429dd1de3a.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03 08:30:39 -07:00
Tony Nguyen
40f74205da hw/intc/armv7m_nic: Access MemoryRegion with MemOp
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".

Convert interfaces by using no-op size_memop.

After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".

As size_memop is a no-op, this patch does not change any behaviour.

Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <21113bae2f54b45176701e0bf595937031368ae6.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03 08:30:38 -07:00
Markus Armbruster
a27bd6c779 Include hw/qdev-properties.h less
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h.  Include hw/qdev-core.h there
instead.

hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.

While there, delete a few superfluous inclusions of hw/qdev-core.h.

Touching hw/qdev-properties.h now recompiles some 1200 objects.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
d645427057 Include migration/vmstate.h less
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get VMStateDescription.  The previous commit made
that unnecessary.

Include migration/vmstate.h only where it's still needed.  Touching it
now recompiles only some 1600 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
64552b6be4 Include hw/irq.h a lot less
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

hw/hw.h supposedly includes it for convenience.  Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.

Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed.  Touching it now recompiles only some 500 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Peter Maydell
be32116e32 target/arm: v8M: Check state of exception being returned from
In v8M, an attempt to return from an exception which is not
active is an illegal exception return. For this purpose,
exceptions which can configurably target either Secure or
NonSecure are not considered to be active if they are
configured for the opposite security state for the one
we're trying to return from (eg attempt to return from
an NS NMI but NMI targets Secure). In the pseudocode this
is handled by IsActiveForState().

Detect this case rather than counting an active exception
possibly of the wrong security state as being sufficient.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190617175317.27557-4-peter.maydell@linaro.org
2019-07-04 17:25:30 +01:00
Peter Maydell
077d744910 arm v8M: Forcibly clear negative-priority exceptions on deactivate
To prevent execution priority remaining negative if the guest
returns from an NMI or HardFault with a corrupted IPSR, the
v8M interrupt deactivation process forces the HardFault and NMI
to inactive based on the current raw execution priority,
even if the interrupt the guest is trying to deactivate
is something else. In the pseudocode this is done in the
Deactivate() function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190617175317.27557-3-peter.maydell@linaro.org
2019-07-04 17:25:30 +01:00
Markus Armbruster
0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Philippe Mathieu-Daudé
23d1f360f3 hw/intc/nvic: Use object_initialize_child for correct reference counting
As explained in commit aff39be0ed:

  Both functions, object_initialize() and object_property_add_child()
  increase the reference counter of the new object, so one of the
  references has to be dropped afterwards to get the reference
  counting right. Otherwise the child object will not be properly
  cleaned up when the parent gets destroyed.
  Thus let's use now object_initialize_child() instead to get the
  reference counting here right.

This patch was generated using the following Coccinelle script:

 @use_sysbus_init_child_obj_missing_parent@
 expression child_ptr;
 expression child_type;
 expression child_size;
 @@
 -   object_initialize(child_ptr, child_size, child_type);
     ...
 -   qdev_set_parent_bus(DEVICE(child_ptr), sysbus_get_default());
     ...
 ?-  object_unref(OBJECT(child_ptr));
 +   sysbus_init_child_obj(OBJECT(PARENT_OBJ), "CHILD_NAME", child_ptr,
 +                         child_size, child_type);

We let NVIC adopt the SysTick timer.

While the object_initialize() function doesn't take an
'Error *errp' argument, the object_initialize_child() does.
Since this code is used when a machine is created (and is not
yet running), we deliberately choose to use the &error_abort
argument instead of ignoring errors if an object creation failed.
This choice also matches when using sysbus_init_child_obj(),
since its code is:

  void sysbus_init_child_obj(Object *parent,
                             const char *childname, void *child,
                             size_t childsize, const char *childtype)
  {
      object_initialize_child(parent, childname, child, childsize,
                              childtype, &error_abort, NULL);

      qdev_set_parent_bus(DEVICE(child), sysbus_get_default());
  }

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190507163416.24647-17-philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-24 15:29:02 -03:00
Peter Maydell
55bb1a55c7 arm: Remove unnecessary includes of hw/arm/arm.h
The hw/arm/arm.h header now only includes declarations relating
to boot.c code, so it is only needed by Arm board or SoC code.
Remove some unnecessary inclusions of it from target/arm files
and from hw/intc/armv7m_nvic.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190516163857.6430-3-peter.maydell@linaro.org
2019-05-23 14:47:43 +01:00
Peter Maydell
a03ffaefce hw/intc/armv7m_nvic: Don't enable ARMV7M_EXCP_DEBUG from reset
The M-profile architecture specifies that the DebugMonitor exception
should be initially disabled, not enabled. It should be controlled
by the DEMCR register's MON_EN bit, but we don't implement that
register yet (like most of the debug architecture for M-profile).

Note that BKPT instructions will still work, because they
will be escalated to HardFault.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190430131439.25251-4-peter.maydell@linaro.org
2019-05-07 12:55:03 +01:00
Peter Maydell
339327b6d4 hw/intc/armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
The non-secure versions of the BFAR and BFSR registers are
supposed to be RAZ/WI if AICR.BFHFNMINS == 0; we were
incorrectly allowing NS code to access the real values.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190430131439.25251-3-peter.maydell@linaro.org
2019-05-07 12:55:03 +01:00
Peter Maydell
b01e2f0284 hw/arm/armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
Rule R_CQRV says that if two pending interrupts have the same
group priority then ties are broken by looking at the subpriority.
We had a comment describing this but had forgotten to actually
implement the subpriority comparison. Correct the omission.

(The further tie break rules of "lowest exception number" and
"secure before non-secure" are handled implicitly by the order
in which we iterate through the exceptions in the loops.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190430131439.25251-2-peter.maydell@linaro.org
2019-05-07 12:55:03 +01:00
Peter Maydell
a99ba8ab16 target/arm: New function armv7m_nvic_set_pending_lazyfp()
In the v7M architecture, if an exception is generated in the process
of doing the lazy stacking of FP registers, the handling of
possible escalation to HardFault is treated differently to the normal
approach: it works based on the saved information about exception
readiness that was stored in the FPCCR when the stack frame was
created. Provide a new function armv7m_nvic_set_pending_lazyfp()
which pends exceptions during lazy stacking, and implements
this logic.

This corresponds to the pseudocode TakePreserveFPException().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-22-peter.maydell@linaro.org
2019-04-29 17:36:02 +01:00
Peter Maydell
b593c2b812 target/arm: Implement v7m_update_fpccr()
Implement the code which updates the FPCCR register on an
exception entry where we are going to use lazy FP stacking.
We have to defer to the NVIC to determine whether the
various exceptions are currently ready or not.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190416125744.27770-12-peter.maydell@linaro.org
2019-04-29 17:36:00 +01:00
Peter Maydell
d33abe82c7 target/arm: Implement dummy versions of M-profile FP-related registers
The M-profile floating point support has three associated config
registers: FPCAR, FPCCR and FPDSCR. It also makes the registers
CPACR and NSACR have behaviour other than reads-as-zero.
Add support for all of these as simple reads-as-written registers.
We will hook up actual functionality later.

The main complexity here is handling the FPCCR register, which
has a mix of banked and unbanked bits.

Note that we don't share storage with the A-profile
cpu->cp15.nsacr and cpu->cp15.cpacr_el1, though the behaviour
is quite similar, for two reasons:
 * the M profile CPACR is banked between security states
 * it preserves the invariant that M profile uses no state
   inside the cp15 substruct

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-4-peter.maydell@linaro.org
2019-04-29 17:35:58 +01:00
Peter Maydell
84d2e3e2ae hw/intc/armv7m_nvic: Allow reading of M-profile MVFR* registers
For M-profile the MVFR* ID registers are memory mapped, in the
range we implement via the NVIC. Allow them to be read.
(If the CPU has no FPU, these registers are defined to be RAZ.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-3-peter.maydell@linaro.org
2019-04-29 17:35:58 +01:00
Peter Maydell
935fe442dc hw/intc/armv7m_nvic: Allow byte accesses to SHPR1
The code for handling the NVIC SHPR1 register intends to permit
byte and halfword accesses (as the architecture requires). However
the 'case' line for it only lists the base address of the
register, so attempts to access bytes other than the first one
end up in the "bad write" default logic. This bug was added
accidentally when we split out the SHPR1 logic from SHPR2 and
SHPR3 to support v6M.

Fixes: 7c9140afd5 ("nvic: Handle ARMv6-M SCS reserved registers")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
The Zephyr RTOS happens to access SHPR1 byte at a time,
which is how I spotted this.
2019-02-15 09:56:39 +00:00
Peter Maydell
3693f217d3 armv7m: Don't assume the NVIC's CPU is CPU 0
Currently the ARMv7M NVIC object's realize method assumes that the
CPU the NVIC is attached to is CPU 0, because it thinks there can
only ever be one CPU in the system. To allow a dual-Cortex-M33
setup we need to remove this assumption; instead the armv7m
wrapper object tells the NVIC its CPU, in the same way that it
already tells the CPU what the NVIC is.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-2-peter.maydell@linaro.org
2019-02-01 14:55:41 +00:00
Richard Henderson
47576b94af target/arm: Move some system registers into a substructure
Create struct ARMISARegisters, to be accessed during translation.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24 07:50:16 +01:00
Peter Maydell
514b4f361b nvic: Expose NMI line
On real v7M hardware, the NMI line is an externally visible signal
that an SoC or board can toggle to assert an NMI. Expose it in
our QEMU NVIC and armv7m container objects so that a board model
can wire it up if it needs to.

In particular, the MPS2 watchdog is wired to NMI.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-08-20 11:24:33 +01:00
Julia Suvorova
c4379b4874 nvic: Change NVIC to support ARMv6-M
The differences from ARMv7-M NVIC are:
  * ARMv6-M only supports up to 32 external interrupts
   (configurable feature already). The ICTR is reserved.
  * Active Bit Register is reserved.
  * ARMv6-M supports 4 priority levels against 256 in ARMv7-M.

Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:19 +01:00
Julia Suvorova
22ab346001 arm: Add ARMv6-M programmer's model support
Forbid stack alignment change. (CCR)
Reserve FAULTMASK, BASEPRI registers.
Report any fault as a HardFault. Disable MemManage, BusFault and
UsageFault, so they always escalated to HardFault. (SHCSR)

Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180718095628.26442-1-jusual@mail.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:19 +01:00