binutils-gdb/opcodes/mips16-opc.c

380 lines
18 KiB
C
Raw Normal View History

1999-05-03 09:29:11 +02:00
/* mips16-opc.c. Mips16 opcode table.
Copyright (C) 1996-2017 Free Software Foundation, Inc.
1999-05-03 09:29:11 +02:00
Contributed by Ian Lance Taylor, Cygnus Support
2007-07-05 11:49:03 +02:00
This file is part of the GNU opcodes library.
1999-05-03 09:29:11 +02:00
2007-07-05 11:49:03 +02:00
This library is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3, or (at your option)
any later version.
1999-05-03 09:29:11 +02:00
2007-07-05 11:49:03 +02:00
It is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
1999-05-03 09:29:11 +02:00
2007-07-05 11:49:03 +02:00
You should have received a copy of the GNU General Public License
along with this file; see the file COPYING. If not, write to the
Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
MA 02110-1301, USA. */
1999-05-03 09:29:11 +02:00
#include "sysdep.h"
PR 14072 * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * sysdep.h: Generate an error if included before config.h. * alpha-opc.c: Include sysdep.h before any other header file. * alpha-dis.c: Likewise. * avr-dis.c: Likewise. * cgen-opc.c: Likewise. * cr16-dis.c: Likewise. * cris-dis.c: Likewise. * crx-dis.c: Likewise. * d10v-dis.c: Likewise. * d10v-opc.c: Likewise. * d30v-dis.c: Likewise. * d30v-opc.c: Likewise. * h8500-dis.c: Likewise. * i370-dis.c: Likewise. * i370-opc.c: Likewise. * m10200-dis.c: Likewise. * m10300-dis.c: Likewise. * micromips-opc.c: Likewise. * mips-opc.c: Likewise. * mips61-opc.c: Likewise. * moxie-dis.c: Likewise. * or32-opc.c: Likewise. * pj-dis.c: Likewise. * ppc-dis.c: Likewise. * ppc-opc.c: Likewise. * s390-dis.c: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Likewise. * sparc-dis.c: Likewise. * sparc-opc.c: Likewise. * spu-dis.c: Likewise. * tic30-dis.c: Likewise. * tic54x-dis.c: Likewise. * tic80-dis.c: Likewise. * tic80-opc.c: Likewise. * tilegx-dis.c: Likewise. * tilepro-dis.c: Likewise. * v850-dis.c: Likewise. * v850-opc.c: Likewise. * vax-dis.c: Likewise. * w65-dis.c: Likewise. * xgate-dis.c: Likewise. * xtensa-dis.c: Likewise. * rl78-decode.opc: Likewise. * rl78-decode.c: Regenerate. * rx-decode.opc: Likewise. * rx-decode.c: Regenerate. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * sysdep.h: Generate an error if included before config.h. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * aclocal.m4: Regenerate. * bfd-in.h: Generate an error if included before config.h. * sysdep.h: Likewise. * bfd-in2.h: Regenerate. * compress.c: Remove #include "config.h". * plugin.c: Likewise. * elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h. * elf64-hppa.c: Likewise. * som.c: Likewise. * xsymc.c: Likewise. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * aclocal.m4: Regenerate. * Makefile.am: Use wrappers around C files generated by flex. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * itbl-lex-wrapper.c: New file. * config/bfin-lex-wrapper.c: New file. * cgen.c: Include as.h before setjmp.h. * config/tc-dlx.c: Include as.h before any other header. * config/tc-h8300.c: Likewise. * config/tc-lm32.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mmix.c: Likewise. * config/tc-msp430.c: Likewise. * config/tc-or32.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-xtensa.c: Likewise. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * unwind-ia64.h: Include config.h.
2012-05-17 17:13:28 +02:00
#include <stdio.h>
1999-05-03 09:29:11 +02:00
#include "opcode/mips.h"
#include "mips-formats.h"
static unsigned char reg_0_map[] = { 0 };
static unsigned char reg_29_map[] = { 29 };
static unsigned char reg_31_map[] = { 31 };
static unsigned char reg_m16_map[] = { 16, 17, 2, 3, 4, 5, 6, 7 };
static unsigned char reg32r_map[] = {
0, 8, 16, 24,
1, 9, 17, 25,
2, 10, 18, 26,
3, 11, 19, 27,
4, 12, 20, 28,
5, 13, 21, 29,
6, 14, 22, 30,
7, 15, 23, 31
};
/* Return the meaning of operand character TYPE, or null if it isn't
recognized. If the operand is affected by the EXTEND instruction,
EXTENDED_P selects between the extended and unextended forms.
The extended forms all have an lsb of 0. */
const struct mips_operand *
decode_mips16_operand (char type, bfd_boolean extended_p)
{
switch (type)
{
case '.': MAPPED_REG (0, 0, GP, reg_0_map);
case '0': HINT (5, 0);
case '1': HINT (3, 5);
case '2': HINT (3, 8);
case '3': HINT (5, 16);
case '4': HINT (3, 21);
case '6': HINT (6, 5);
case 'L': SPECIAL (6, 5, ENTRY_EXIT_LIST);
case 'M': SPECIAL (7, 0, SAVE_RESTORE_LIST);
case 'P': SPECIAL (0, 0, PC);
case 'R': MAPPED_REG (0, 0, GP, reg_31_map);
case 'S': MAPPED_REG (0, 0, GP, reg_29_map);
case 'X': REG (5, 0, GP);
case 'Y': MAPPED_REG (5, 3, GP, reg32r_map);
case 'Z': MAPPED_REG (3, 0, GP, reg_m16_map);
case 'a': JUMP (26, 0, 2);
case 'e': HINT (11, 0);
case 'i': JALX (26, 0, 2);
case 'l': SPECIAL (6, 5, ENTRY_EXIT_LIST);
case 'm': SPECIAL (7, 0, SAVE_RESTORE_LIST);
case 's': HINT (3, 24);
case 'v': OPTIONAL_MAPPED_REG (3, 8, GP, reg_m16_map);
case 'w': OPTIONAL_MAPPED_REG (3, 5, GP, reg_m16_map);
case 'x': MAPPED_REG (3, 8, GP, reg_m16_map);
case 'y': MAPPED_REG (3, 5, GP, reg_m16_map);
case 'z': MAPPED_REG (3, 2, GP, reg_m16_map);
}
if (extended_p)
switch (type)
{
case '<': UINT (5, 22);
case '[': UINT (6, 0);
case ']': UINT (6, 0);
case '5': SINT (16, 0);
case '8': SINT (16, 0);
case 'A': PCREL (16, 0, TRUE, 0, 2, FALSE, FALSE);
case 'B': PCREL (16, 0, TRUE, 0, 3, FALSE, FALSE);
case 'C': SINT (16, 0);
case 'D': SINT (16, 0);
case 'E': PCREL (16, 0, TRUE, 0, 2, FALSE, FALSE);
case 'F': SINT (15, 0);
case 'H': SINT (16, 0);
case 'K': SINT (16, 0);
case 'U': UINT (16, 0);
case 'V': SINT (16, 0);
case 'W': SINT (16, 0);
case 'j': SINT (16, 0);
case 'k': SINT (16, 0);
case 'p': BRANCH (16, 0, 1);
case 'q': BRANCH (16, 0, 1);
}
else
switch (type)
{
case '<': INT_ADJ (3, 2, 8, 0, FALSE);
case '[': INT_ADJ (3, 2, 8, 0, FALSE);
case ']': INT_ADJ (3, 8, 8, 0, FALSE);
case '5': UINT (5, 0);
case '8': UINT (8, 0);
case 'A': PCREL (8, 0, FALSE, 2, 2, FALSE, FALSE);
case 'B': PCREL (5, 0, FALSE, 3, 3, FALSE, FALSE);
case 'C': INT_ADJ (8, 0, 255, 3, FALSE); /* (0 .. 255) << 3 */
case 'D': INT_ADJ (5, 0, 31, 3, FALSE); /* (0 .. 31) << 3 */
case 'E': PCREL (5, 0, FALSE, 2, 2, FALSE, FALSE);
case 'F': SINT (4, 0);
case 'H': INT_ADJ (5, 0, 31, 1, FALSE); /* (0 .. 31) << 1 */
case 'K': INT_ADJ (8, 0, 127, 3, FALSE); /* (-128 .. 127) << 3 */
case 'U': UINT (8, 0);
case 'V': INT_ADJ (8, 0, 255, 2, FALSE); /* (0 .. 255) << 2 */
case 'W': INT_ADJ (5, 0, 31, 2, FALSE); /* (0 .. 31) << 2 */
case 'j': SINT (5, 0);
case 'k': SINT (8, 0);
case 'p': BRANCH (8, 0, 1);
case 'q': BRANCH (11, 0, 1);
}
return 0;
}
1999-05-03 09:29:11 +02:00
/* This is the opcodes table for the mips16 processor. The format of
this table is intentionally identical to the one in mips-opc.c.
However, the special letters that appear in the argument string are
different, and the table uses some different flags. */
/* Use some short hand macros to keep down the length of the lines in
the opcodes table. */
#define AL INSN2_ALIAS
1999-05-03 09:29:11 +02:00
#define UBD INSN_UNCOND_BRANCH_DELAY
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
#define WR_1 INSN_WRITE_1
#define WR_2 INSN_WRITE_2
#define RD_1 INSN_READ_1
#define RD_2 INSN_READ_2
#define RD_3 INSN_READ_3
#define RD_4 INSN_READ_4
#define MOD_1 (WR_1|RD_1)
#define MOD_2 (WR_2|RD_2)
1999-05-03 09:29:11 +02:00
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
#define RD_T INSN_READ_GPR_24
#define WR_T INSN_WRITE_GPR_24
#define WR_31 INSN_WRITE_GPR_31
1999-05-03 09:29:11 +02:00
#define WR_HI INSN_WRITE_HI
#define WR_LO INSN_WRITE_LO
#define RD_HI INSN_READ_HI
#define RD_LO INSN_READ_LO
#define NODS INSN_NO_DELAY_SLOT
#define TRAP INSN_NO_DELAY_SLOT
1999-05-03 09:29:11 +02:00
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
#define RD_16 INSN2_READ_GPR_16
#define RD_SP INSN2_READ_SP
#define WR_SP INSN2_WRITE_SP
#define MOD_SP (RD_SP|WR_SP)
#define RD_31 INSN2_READ_GPR_31
#define RD_PC INSN2_READ_PC
#define UBR INSN2_UNCOND_BRANCH
#define CBR INSN2_COND_BRANCH
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
#define SH INSN2_SHORT_ONLY
#define I1 INSN_ISA1
1999-05-03 09:29:11 +02:00
#define I3 INSN_ISA3
#define I32 INSN_ISA32
#define I64 INSN_ISA64
#define T3 INSN_3900
1999-05-03 09:29:11 +02:00
2000-12-01 21:06:36 +01:00
const struct mips_opcode mips16_opcodes[] =
{
/* name, args, match, mask, pinfo, pinfo2, membership, ase, exclusions */
{"nop", "", 0x6500, 0xffff, 0, SH|RD_16|AL, I1, 0, 0 }, /* move $0,$Z */
{"la", "x,A", 0x0800, 0xf800, WR_1, RD_PC|AL, I1, 0, 0 },
{"abs", "x,w", 0, (int) M_ABS, INSN_MACRO, 0, I1, 0, 0 },
{"addiu", "y,x,F", 0x4000, 0xf810, WR_1|RD_2, 0, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"addiu", "x,k", 0x4800, 0xf800, MOD_1, 0, I1, 0, 0 },
{"addiu", "S,K", 0x6300, 0xff00, 0, MOD_SP, I1, 0, 0 },
{"addiu", "S,S,K", 0x6300, 0xff00, 0, MOD_SP, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"addiu", "x,P,V", 0x0800, 0xf800, WR_1, RD_PC, I1, 0, 0 },
{"addiu", "x,S,V", 0x0000, 0xf800, WR_1, RD_SP, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"addu", "z,v,y", 0xe001, 0xf803, WR_1|RD_2|RD_3, SH, I1, 0, 0 },
{"addu", "y,x,F", 0x4000, 0xf810, WR_1|RD_2, 0, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"addu", "x,k", 0x4800, 0xf800, MOD_1, 0, I1, 0, 0 },
{"addu", "S,K", 0x6300, 0xff00, 0, MOD_SP, I1, 0, 0 },
{"addu", "S,S,K", 0x6300, 0xff00, 0, MOD_SP, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"addu", "x,P,V", 0x0800, 0xf800, WR_1, RD_PC, I1, 0, 0 },
{"addu", "x,S,V", 0x0000, 0xf800, WR_1, RD_SP, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"and", "x,y", 0xe80c, 0xf81f, MOD_1|RD_2, SH, I1, 0, 0 },
{"b", "q", 0x1000, 0xf800, 0, UBR, I1, 0, 0 },
{"beq", "x,y,p", 0, (int) M_BEQ, INSN_MACRO, 0, I1, 0, 0 },
{"beq", "x,I,p", 0, (int) M_BEQ_I, INSN_MACRO, 0, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"beqz", "x,p", 0x2000, 0xf800, RD_1, CBR, I1, 0, 0 },
{"bge", "x,y,p", 0, (int) M_BGE, INSN_MACRO, 0, I1, 0, 0 },
{"bge", "x,I,p", 0, (int) M_BGE_I, INSN_MACRO, 0, I1, 0, 0 },
{"bgeu", "x,y,p", 0, (int) M_BGEU, INSN_MACRO, 0, I1, 0, 0 },
{"bgeu", "x,I,p", 0, (int) M_BGEU_I, INSN_MACRO, 0, I1, 0, 0 },
{"bgt", "x,y,p", 0, (int) M_BGT, INSN_MACRO, 0, I1, 0, 0 },
{"bgt", "x,I,p", 0, (int) M_BGT_I, INSN_MACRO, 0, I1, 0, 0 },
{"bgtu", "x,y,p", 0, (int) M_BGTU, INSN_MACRO, 0, I1, 0, 0 },
{"bgtu", "x,I,p", 0, (int) M_BGTU_I, INSN_MACRO, 0, I1, 0, 0 },
{"ble", "x,y,p", 0, (int) M_BLE, INSN_MACRO, 0, I1, 0, 0 },
{"ble", "x,I,p", 0, (int) M_BLE_I, INSN_MACRO, 0, I1, 0, 0 },
{"bleu", "x,y,p", 0, (int) M_BLEU, INSN_MACRO, 0, I1, 0, 0 },
{"bleu", "x,I,p", 0, (int) M_BLEU_I, INSN_MACRO, 0, I1, 0, 0 },
{"blt", "x,y,p", 0, (int) M_BLT, INSN_MACRO, 0, I1, 0, 0 },
{"blt", "x,I,p", 0, (int) M_BLT_I, INSN_MACRO, 0, I1, 0, 0 },
{"bltu", "x,y,p", 0, (int) M_BLTU, INSN_MACRO, 0, I1, 0, 0 },
{"bltu", "x,I,p", 0, (int) M_BLTU_I, INSN_MACRO, 0, I1, 0, 0 },
{"bne", "x,y,p", 0, (int) M_BNE, INSN_MACRO, 0, I1, 0, 0 },
{"bne", "x,I,p", 0, (int) M_BNE_I, INSN_MACRO, 0, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"bnez", "x,p", 0x2800, 0xf800, RD_1, CBR, I1, 0, 0 },
{"break", "", 0xe805, 0xffff, TRAP, SH, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"break", "6", 0xe805, 0xf81f, TRAP, SH, I1, 0, 0 },
{"bteqz", "p", 0x6000, 0xff00, RD_T, CBR, I1, 0, 0 },
{"btnez", "p", 0x6100, 0xff00, RD_T, CBR, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"cmpi", "x,U", 0x7000, 0xf800, RD_1|WR_T, 0, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"cmp", "x,y", 0xe80a, 0xf81f, RD_1|RD_2|WR_T, SH, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"cmp", "x,U", 0x7000, 0xf800, RD_1|WR_T, 0, I1, 0, 0 },
{"dla", "y,E", 0xfe00, 0xff00, WR_1, RD_PC|AL, I3, 0, 0 },
{"daddiu", "y,x,F", 0x4010, 0xf810, WR_1|RD_2, 0, I3, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"daddiu", "y,j", 0xfd00, 0xff00, MOD_1, 0, I3, 0, 0 },
{"daddiu", "S,K", 0xfb00, 0xff00, 0, MOD_SP, I3, 0, 0 },
{"daddiu", "S,S,K", 0xfb00, 0xff00, 0, MOD_SP, I3, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"daddiu", "y,P,W", 0xfe00, 0xff00, WR_1, RD_PC, I3, 0, 0 },
{"daddiu", "y,S,W", 0xff00, 0xff00, WR_1, RD_SP, I3, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"daddu", "z,v,y", 0xe000, 0xf803, WR_1|RD_2|RD_3, SH, I3, 0, 0 },
{"daddu", "y,x,F", 0x4010, 0xf810, WR_1|RD_2, 0, I3, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"daddu", "y,j", 0xfd00, 0xff00, MOD_1, 0, I3, 0, 0 },
{"daddu", "S,K", 0xfb00, 0xff00, 0, MOD_SP, I3, 0, 0 },
{"daddu", "S,S,K", 0xfb00, 0xff00, 0, MOD_SP, I3, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"daddu", "y,P,W", 0xfe00, 0xff00, WR_1, RD_PC, I3, 0, 0 },
{"daddu", "y,S,W", 0xff00, 0xff00, WR_1, RD_SP, I3, 0, 0 },
{"ddiv", ".,x,y", 0xe81e, 0xf81f, RD_2|RD_3|WR_HI|WR_LO, SH, I3, 0, 0 },
{"ddiv", "z,v,y", 0, (int) M_DDIV_3, INSN_MACRO, 0, I3, 0, 0 },
{"ddivu", ".,x,y", 0xe81f, 0xf81f, RD_2|RD_3|WR_HI|WR_LO, SH, I3, 0, 0 },
{"ddivu", "z,v,y", 0, (int) M_DDIVU_3, INSN_MACRO, 0, I3, 0, 0 },
{"div", ".,x,y", 0xe81a, 0xf81f, RD_2|RD_3|WR_HI|WR_LO, SH, I1, 0, 0 },
{"div", "z,v,y", 0, (int) M_DIV_3, INSN_MACRO, 0, I1, 0, 0 },
{"divu", ".,x,y", 0xe81b, 0xf81f, RD_2|RD_3|WR_HI|WR_LO, SH, I1, 0, 0 },
{"divu", "z,v,y", 0, (int) M_DIVU_3, INSN_MACRO, 0, I1, 0, 0 },
{"dmul", "z,v,y", 0, (int) M_DMUL, INSN_MACRO, 0, I3, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"dmult", "x,y", 0xe81c, 0xf81f, RD_1|RD_2|WR_HI|WR_LO, SH, I3, 0, 0 },
{"dmultu", "x,y", 0xe81d, 0xf81f, RD_1|RD_2|WR_HI|WR_LO, SH, I3, 0, 0 },
{"drem", ".,x,y", 0xe81e, 0xf81f, RD_2|RD_3|WR_HI|WR_LO, SH, I3, 0, 0 },
{"drem", "z,v,y", 0, (int) M_DREM_3, INSN_MACRO, 0, I3, 0, 0 },
{"dremu", ".,x,y", 0xe81f, 0xf81f, RD_2|RD_3|WR_HI|WR_LO, SH, I3, 0, 0 },
{"dremu", "z,v,y", 0, (int) M_DREMU_3, INSN_MACRO, 0, I3, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"dsllv", "y,x", 0xe814, 0xf81f, MOD_1|RD_2, SH, I3, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"dsll", "x,w,[", 0x3001, 0xf803, WR_1|RD_2, 0, I3, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"dsll", "y,x", 0xe814, 0xf81f, MOD_1|RD_2, SH, I3, 0, 0 },
{"dsrav", "y,x", 0xe817, 0xf81f, MOD_1|RD_2, SH, I3, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"dsra", "y,]", 0xe813, 0xf81f, MOD_1, 0, I3, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"dsra", "y,x", 0xe817, 0xf81f, MOD_1|RD_2, SH, I3, 0, 0 },
{"dsrlv", "y,x", 0xe816, 0xf81f, MOD_1|RD_2, SH, I3, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"dsrl", "y,]", 0xe808, 0xf81f, MOD_1, 0, I3, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"dsrl", "y,x", 0xe816, 0xf81f, MOD_1|RD_2, SH, I3, 0, 0 },
{"dsubu", "z,v,y", 0xe002, 0xf803, WR_1|RD_2|RD_3, SH, I3, 0, 0 },
{"dsubu", "y,x,I", 0, (int) M_DSUBU_I, INSN_MACRO, 0, I3, 0, 0 },
{"dsubu", "y,I", 0, (int) M_DSUBU_I_2, INSN_MACRO, 0, I3, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"exit", "L", 0xed09, 0xff1f, TRAP, SH, I1, 0, 0 },
{"exit", "L", 0xee09, 0xff1f, TRAP, SH, I1, 0, 0 },
{"exit", "", 0xef09, 0xffff, TRAP, SH, I1, 0, 0 },
{"exit", "L", 0xef09, 0xff1f, TRAP, SH, I1, 0, 0 },
{"entry", "", 0xe809, 0xffff, TRAP, SH, I1, 0, 0 },
{"entry", "l", 0xe809, 0xf81f, TRAP, SH, I1, 0, 0 },
{"jalr", "x", 0xe840, 0xf8ff, RD_1|WR_31|UBD, SH, I1, 0, 0 },
{"jalr", "R,x", 0xe840, 0xf8ff, RD_2|WR_31|UBD, SH, I1, 0, 0 },
{"jal", "x", 0xe840, 0xf8ff, RD_1|WR_31|UBD, SH, I1, 0, 0 },
{"jal", "R,x", 0xe840, 0xf8ff, RD_2|WR_31|UBD, SH, I1, 0, 0 },
MIPS16: Switch to 32-bit opcode table interpretation Switch to 32-bit MIPS16 opcode table entry interpretation, similar to how the microMIPS opcode table is handled, for both the `match' and `mask' fields, removing special casing for JAL and JALX instructions and their `a' and `i' operand codes throughout, while retaining automatic processing of extendable opcodes in assembly and disassembly. In assembly disallow size enforcement suffixes as appropriate: `.t' for both 32-bit instructions and macros and `.e' for macros only, making macro handling consistent with the microMIPS instruction set. In disassembly fully decode EXTEND prefixes prepended to unsupported instruction encodings (according to the ISA selection) rather than dumping them as hexadecimal data along with the following instruction, removing all special casing for the EXTEND prefix and making its handling rely on its opcode table entry, except where it is considered a part of an extendable instruction. include/ * opcode/mips.h (mips_opcode_32bit_p): New inline function. gas/ * config/tc-mips.c (micromips_insn_length): Use `mips_opcode_32bit_p'. (is_size_valid): Adjust description. (is_size_valid_16): New function. (validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16 operand decoding. (validate_mips16_insn): Remove `a' and `i' operand code special casing, use `mips_opcode_32bit_p' to determine instruction width. (append_insn): Adjust forced MIPS16 instruction size determination. (match_mips16_insn): Likewise. Don't shift the instruction's opcode with the `a' and `i' operand codes. Use `mips_opcode_32bit_p' in operand decoding. (match_mips16_insns): Check for forced instruction size's validity. (mips16_ip): Don't force instruction size in the `noautoextend' mode. * testsuite/gas/mips/mips16-jal-e.d: New test. * testsuite/gas/mips/mips16-jal-t.d: New test. * testsuite/gas/mips/mips16-macro-e.d: New test. * testsuite/gas/mips/mips16-macro-t.d: New test. * testsuite/gas/mips/mips16-jal-t.l: New stderr output. * testsuite/gas/mips/mips16-macro-e.l: New stderr output. * testsuite/gas/mips/mips16-macro-t.l: New stderr output. * testsuite/gas/mips/mips16-jal-e.s: New test source. * testsuite/gas/mips/mips16-jal-t.s: New test source. * testsuite/gas/mips/mips16-macro-e.s: New test source. * testsuite/gas/mips/mips16-macro-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_mips16_insn_arg): Always handle `extend' and `insn' together, with `extend' as the high-order 16 bits. (match_kind): New enum. (print_insn_mips16): Rework for 32-bit instruction matching. Do not dump EXTEND prefixes here. * mips16-opc.c (mips16_opcodes): Move "extend" entry to the end. Recode `match' and `mask' fields as 32-bit in absolute "jal" and "jalx" entries. binutils/ * testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust test for separate EXTEND prefix disassembly.
2016-12-20 03:03:40 +01:00
{"jal", "a", 0x18000000, 0xfc000000, WR_31|UBD, 0, I1, 0, 0 },
{"jalx", "i", 0x1c000000, 0xfc000000, WR_31|UBD, 0, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"jr", "x", 0xe800, 0xf8ff, RD_1|UBD, SH, I1, 0, 0 },
{"jr", "R", 0xe820, 0xffff, UBD, SH|RD_31, I1, 0, 0 },
{"j", "x", 0xe800, 0xf8ff, RD_1|UBD, SH, I1, 0, 0 },
{"j", "R", 0xe820, 0xffff, UBD, SH|RD_31, I1, 0, 0 },
/* MIPS16e compact jumps. We keep them near the ordinary jumps
so that we easily find them when converting a normal jump
to a compact one. */
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"jalrc", "x", 0xe8c0, 0xf8ff, RD_1|WR_31|NODS, SH|UBR, I32, 0, 0 },
{"jalrc", "R,x", 0xe8c0, 0xf8ff, RD_2|WR_31|NODS, SH|UBR, I32, 0, 0 },
{"jrc", "x", 0xe880, 0xf8ff, RD_1|NODS, SH|UBR, I32, 0, 0 },
{"jrc", "R", 0xe8a0, 0xffff, NODS, SH|RD_31|UBR, I32, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"lb", "y,5(x)", 0x8000, 0xf800, WR_1|RD_3, 0, I1, 0, 0 },
{"lbu", "y,5(x)", 0xa000, 0xf800, WR_1|RD_3, 0, I1, 0, 0 },
{"ld", "y,D(x)", 0x3800, 0xf800, WR_1|RD_3, 0, I3, 0, 0 },
{"ld", "y,B", 0xfc00, 0xff00, WR_1, RD_PC|AL, I3, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"ld", "y,D(P)", 0xfc00, 0xff00, WR_1, RD_PC, I3, 0, 0 },
{"ld", "y,D(S)", 0xf800, 0xff00, WR_1, RD_SP, I3, 0, 0 },
{"lh", "y,H(x)", 0x8800, 0xf800, WR_1|RD_3, 0, I1, 0, 0 },
{"lhu", "y,H(x)", 0xa800, 0xf800, WR_1|RD_3, 0, I1, 0, 0 },
{"li", "x,U", 0x6800, 0xf800, WR_1, 0, I1, 0, 0 },
{"lw", "y,W(x)", 0x9800, 0xf800, WR_1|RD_3, 0, I1, 0, 0 },
{"lw", "x,A", 0xb000, 0xf800, WR_1, RD_PC|AL, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"lw", "x,V(P)", 0xb000, 0xf800, WR_1, RD_PC, I1, 0, 0 },
{"lw", "x,V(S)", 0x9000, 0xf800, WR_1, RD_SP, I1, 0, 0 },
{"lwu", "y,W(x)", 0xb800, 0xf800, WR_1|RD_3, 0, I3, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"mfhi", "x", 0xe810, 0xf8ff, WR_1|RD_HI, SH, I1, 0, 0 },
{"mflo", "x", 0xe812, 0xf8ff, WR_1|RD_LO, SH, I1, 0, 0 },
{"move", "y,X", 0x6700, 0xff00, WR_1|RD_2, SH, I1, 0, 0 },
{"move", "Y,Z", 0x6500, 0xff00, WR_1|RD_2, SH, I1, 0, 0 },
{"mul", "z,v,y", 0, (int) M_MUL, INSN_MACRO, 0, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"mult", "x,y", 0xe818, 0xf81f, RD_1|RD_2|WR_HI|WR_LO, SH, I1, 0, 0 },
{"multu", "x,y", 0xe819, 0xf81f, RD_1|RD_2|WR_HI|WR_LO, SH, I1, 0, 0 },
{"neg", "x,w", 0xe80b, 0xf81f, WR_1|RD_2, SH, I1, 0, 0 },
{"not", "x,w", 0xe80f, 0xf81f, WR_1|RD_2, SH, I1, 0, 0 },
{"or", "x,y", 0xe80d, 0xf81f, MOD_1|RD_2, SH, I1, 0, 0 },
{"rem", ".,x,y", 0xe81a, 0xf81f, RD_2|RD_3|WR_HI|WR_LO, SH, I1, 0, 0 },
{"rem", "z,v,y", 0, (int) M_REM_3, INSN_MACRO, 0, I1, 0, 0 },
{"remu", ".,x,y", 0xe81b, 0xf81f, RD_2|RD_3|WR_HI|WR_LO, SH, I1, 0, 0 },
{"remu", "z,v,y", 0, (int) M_REMU_3, INSN_MACRO, 0, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"sb", "y,5(x)", 0xc000, 0xf800, RD_1|RD_3, 0, I1, 0, 0 },
{"sd", "y,D(x)", 0x7800, 0xf800, RD_1|RD_3, 0, I3, 0, 0 },
{"sd", "y,D(S)", 0xf900, 0xff00, RD_1, RD_SP, I3, 0, 0 },
{"sd", "R,C(S)", 0xfa00, 0xff00, 0, RD_31|RD_SP, I3, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"sh", "y,H(x)", 0xc800, 0xf800, RD_1|RD_3, 0, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"sllv", "y,x", 0xe804, 0xf81f, MOD_1|RD_2, SH, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"sll", "x,w,<", 0x3000, 0xf803, WR_1|RD_2, 0, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"sll", "y,x", 0xe804, 0xf81f, MOD_1|RD_2, SH, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"slti", "x,8", 0x5000, 0xf800, RD_1|WR_T, 0, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"slt", "x,y", 0xe802, 0xf81f, RD_1|RD_2|WR_T, SH, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"slt", "x,8", 0x5000, 0xf800, RD_1|WR_T, 0, I1, 0, 0 },
{"sltiu", "x,8", 0x5800, 0xf800, RD_1|WR_T, 0, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"sltu", "x,y", 0xe803, 0xf81f, RD_1|RD_2|WR_T, SH, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"sltu", "x,8", 0x5800, 0xf800, RD_1|WR_T, 0, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"srav", "y,x", 0xe807, 0xf81f, MOD_1|RD_2, SH, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"sra", "x,w,<", 0x3003, 0xf803, WR_1|RD_2, 0, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"sra", "y,x", 0xe807, 0xf81f, MOD_1|RD_2, SH, I1, 0, 0 },
{"srlv", "y,x", 0xe806, 0xf81f, MOD_1|RD_2, SH, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"srl", "x,w,<", 0x3002, 0xf803, WR_1|RD_2, 0, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"srl", "y,x", 0xe806, 0xf81f, MOD_1|RD_2, SH, I1, 0, 0 },
{"subu", "z,v,y", 0xe003, 0xf803, WR_1|RD_2|RD_3, SH, I1, 0, 0 },
{"subu", "y,x,I", 0, (int) M_SUBU_I, INSN_MACRO, 0, I1, 0, 0 },
{"subu", "x,I", 0, (int) M_SUBU_I_2, INSN_MACRO, 0, I1, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"sw", "y,W(x)", 0xd800, 0xf800, RD_1|RD_3, 0, I1, 0, 0 },
{"sw", "x,V(S)", 0xd000, 0xf800, RD_1, RD_SP, I1, 0, 0 },
{"sw", "R,V(S)", 0x6200, 0xff00, 0, RD_31|RD_SP, I1, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"xor", "x,y", 0xe80e, 0xf81f, MOD_1|RD_2, SH, I1, 0, 0 },
/* MIPS16e additions; see above for compact jumps. */
{"restore", "M", 0x6400, 0xff80, WR_31|NODS, MOD_SP, I32, 0, 0 },
include/opcode/ * mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01 22:55:25 +02:00
{"save", "m", 0x6480, 0xff80, NODS, RD_31|MOD_SP, I32, 0, 0 },
{"sdbbp", "", 0xe801, 0xffff, TRAP, SH, I32, 0, 0 },
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"sdbbp", "6", 0xe801, 0xf81f, TRAP, SH, I32, 0, 0 },
{"seb", "x", 0xe891, 0xf8ff, MOD_1, SH, I32, 0, 0 },
{"seh", "x", 0xe8b1, 0xf8ff, MOD_1, SH, I32, 0, 0 },
{"sew", "x", 0xe8d1, 0xf8ff, MOD_1, SH, I64, 0, 0 },
{"zeb", "x", 0xe811, 0xf8ff, MOD_1, SH, I32, 0, 0 },
{"zeh", "x", 0xe831, 0xf8ff, MOD_1, SH, I32, 0, 0 },
{"zew", "x", 0xe851, 0xf8ff, MOD_1, SH, I64, 0, 0 },
/* Place asmacro at the bottom so that it catches any implementation
specific macros that didn't match anything. */
{"asmacro", "s,0,1,2,3,4", 0xf000e000, 0xf800f800, 0, 0, I32, 0, 0 },
MIPS16: Switch to 32-bit opcode table interpretation Switch to 32-bit MIPS16 opcode table entry interpretation, similar to how the microMIPS opcode table is handled, for both the `match' and `mask' fields, removing special casing for JAL and JALX instructions and their `a' and `i' operand codes throughout, while retaining automatic processing of extendable opcodes in assembly and disassembly. In assembly disallow size enforcement suffixes as appropriate: `.t' for both 32-bit instructions and macros and `.e' for macros only, making macro handling consistent with the microMIPS instruction set. In disassembly fully decode EXTEND prefixes prepended to unsupported instruction encodings (according to the ISA selection) rather than dumping them as hexadecimal data along with the following instruction, removing all special casing for the EXTEND prefix and making its handling rely on its opcode table entry, except where it is considered a part of an extendable instruction. include/ * opcode/mips.h (mips_opcode_32bit_p): New inline function. gas/ * config/tc-mips.c (micromips_insn_length): Use `mips_opcode_32bit_p'. (is_size_valid): Adjust description. (is_size_valid_16): New function. (validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16 operand decoding. (validate_mips16_insn): Remove `a' and `i' operand code special casing, use `mips_opcode_32bit_p' to determine instruction width. (append_insn): Adjust forced MIPS16 instruction size determination. (match_mips16_insn): Likewise. Don't shift the instruction's opcode with the `a' and `i' operand codes. Use `mips_opcode_32bit_p' in operand decoding. (match_mips16_insns): Check for forced instruction size's validity. (mips16_ip): Don't force instruction size in the `noautoextend' mode. * testsuite/gas/mips/mips16-jal-e.d: New test. * testsuite/gas/mips/mips16-jal-t.d: New test. * testsuite/gas/mips/mips16-macro-e.d: New test. * testsuite/gas/mips/mips16-macro-t.d: New test. * testsuite/gas/mips/mips16-jal-t.l: New stderr output. * testsuite/gas/mips/mips16-macro-e.l: New stderr output. * testsuite/gas/mips/mips16-macro-t.l: New stderr output. * testsuite/gas/mips/mips16-jal-e.s: New test source. * testsuite/gas/mips/mips16-jal-t.s: New test source. * testsuite/gas/mips/mips16-macro-e.s: New test source. * testsuite/gas/mips/mips16-macro-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_mips16_insn_arg): Always handle `extend' and `insn' together, with `extend' as the high-order 16 bits. (match_kind): New enum. (print_insn_mips16): Rework for 32-bit instruction matching. Do not dump EXTEND prefixes here. * mips16-opc.c (mips16_opcodes): Move "extend" entry to the end. Recode `match' and `mask' fields as 32-bit in absolute "jal" and "jalx" entries. binutils/ * testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust test for separate EXTEND prefix disassembly.
2016-12-20 03:03:40 +01:00
/* Place EXTEND last so that it catches any prefix that didn't match
anything. */
MIPS16: Handle non-extensible instructions correctly Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23 17:49:42 +01:00
{"extend", "e", 0xf000, 0xf800, NODS, SH, I1, 0, 0 },
1999-05-03 09:29:11 +02:00
};
const int bfd_mips16_num_opcodes =
((sizeof mips16_opcodes) / (sizeof (mips16_opcodes[0])));