1999-05-03 09:29:11 +02:00
|
|
|
|
/* ppc.h -- Header file for PowerPC opcode table
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
Copyright 1994, 1995, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
|
include/opcode/
* ppc.h: Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR.
opcodes/
* ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
* ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
(PPCVEC2, PPCTMR, E6500): New short names.
(powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
optional operands on sync instruction for E6500 target.
bfd/
* archures.c: Add bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add entryies for
bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
gas/
* config/tc-ppc.c (md_show_usage): Document -me5500 and -me6500.
(ppc_handle_align): Add termination nop opcode for e500mc family.
* doc/as.texinfo: Document options -me5500 and -me6500.
* doc/c-ppc.texi: Likewise.
gas/testsuite/
* gas/ppc/e500mc64_nop.s: New test case for e500mc family
termination nops.
* gas/ppc/e500mc64_nop.d: Likewise.
* gas/ppc/e5500_nop.s: Likewise.
* gas/ppc/e5500_nop.d: Likewise.
* gas/ppc/e6500_nop.s: Likewise.
* gas/ppc/e6500_nop.d: Likewise.
* gas/ppc/e6500.s: New.
* gas/ppc/e6500.d: Likewise.
* gas/ppc/ppc.exp: Run e6500, e500mc64_nop, e5500_nop, and e6500_nop.
2012-03-10 00:39:06 +01:00
|
|
|
|
2007, 2008, 2009, 2010, 2012 Free Software Foundation, Inc.
|
1999-05-03 09:29:11 +02:00
|
|
|
|
Written by Ian Lance Taylor, Cygnus Support
|
|
|
|
|
|
2010-04-15 12:26:09 +02:00
|
|
|
|
This file is part of GDB, GAS, and the GNU binutils.
|
|
|
|
|
|
|
|
|
|
GDB, GAS, and the GNU binutils are free software; you can redistribute
|
|
|
|
|
them and/or modify them under the terms of the GNU General Public
|
|
|
|
|
License as published by the Free Software Foundation; either version 3,
|
|
|
|
|
or (at your option) any later version.
|
|
|
|
|
|
|
|
|
|
GDB, GAS, and the GNU binutils are distributed in the hope that they
|
|
|
|
|
will be useful, but WITHOUT ANY WARRANTY; without even the implied
|
|
|
|
|
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
|
|
|
|
|
the GNU General Public License for more details.
|
|
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
|
along with this file; see the file COPYING3. If not, write to the Free
|
|
|
|
|
Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
|
|
|
|
|
MA 02110-1301, USA. */
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
#ifndef PPC_H
|
|
|
|
|
#define PPC_H
|
|
|
|
|
|
2009-09-22 04:36:26 +02:00
|
|
|
|
#include "bfd_stdint.h"
|
|
|
|
|
|
|
|
|
|
typedef uint64_t ppc_cpu_t;
|
include/opcode/
* ppc.h (ppc_cpu_t): New typedef.
(struct powerpc_opcode <flags>): Use it.
(struct powerpc_operand <insert, extract>): Likewise.
(struct powerpc_macro <flags>): Likewise.
gas/
* config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
(ppc_insert_operand): Likewise.
(ppc_machine): Likewise.
* config/tc-ppc.h: #include "opcode/ppc.h"
(struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
(ppc_cpu): Update extern decl.
opcodes/
* ppc-dis.c (print_insn_powerpc): Update prototye to use new
ppc_cpu_t typedef.
(struct dis_private): New.
(POWERPC_DIALECT): New define.
(powerpc_dialect): Renamed to...
(powerpc_init_dialect): This. Update to use ppc_cpu_t and
struct dis_private.
(print_insn_big_powerpc): Update for using structure in
info->private_data.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Change type of dialect param to ppc_cpu_t.
(skip_optional_operands): Likewise.
(print_insn_powerpc): Likewise. Remove initialization of dialect.
* ppc-opc.c (extract_bat, extract_bba, extract_bdm, extract_bdp,
extract_bo, extract_boe, extract_fxm, extract_mb6, extract_mbe,
extract_nb, extract_nsi, extract_rbs, extract_sh6, extract_spr,
extract_sprg, extract_tbr insert_bat, insert_bba, insert_bdm,
insert_bdp, insert_bo, insert_boe, insert_fxm, insert_mb6, insert_mbe,
insert_nsi, insert_ral, insert_ram, insert_raq, insert_ras, insert_rbs,
insert_sh6, insert_spr, insert_sprg, insert_tbr): Change the dialect
param to be of type ppc_cpu_t. Update prototype.
2008-06-13 22:16:00 +02:00
|
|
|
|
|
1999-05-03 09:29:11 +02:00
|
|
|
|
/* The opcode table is an array of struct powerpc_opcode. */
|
|
|
|
|
|
|
|
|
|
struct powerpc_opcode
|
|
|
|
|
{
|
|
|
|
|
/* The opcode name. */
|
|
|
|
|
const char *name;
|
|
|
|
|
|
|
|
|
|
/* The opcode itself. Those bits which will be filled in with
|
|
|
|
|
operands are zeroes. */
|
|
|
|
|
unsigned long opcode;
|
|
|
|
|
|
|
|
|
|
/* The opcode mask. This is used by the disassembler. This is a
|
|
|
|
|
mask containing ones indicating those bits which must match the
|
|
|
|
|
opcode field, and zeroes indicating those bits which need not
|
|
|
|
|
match (and are presumably filled in by operands). */
|
|
|
|
|
unsigned long mask;
|
|
|
|
|
|
|
|
|
|
/* One bit flags for the opcode. These are used to indicate which
|
|
|
|
|
specific processors support the instructions. The defined values
|
|
|
|
|
are listed below. */
|
include/opcode/
* ppc.h (ppc_cpu_t): New typedef.
(struct powerpc_opcode <flags>): Use it.
(struct powerpc_operand <insert, extract>): Likewise.
(struct powerpc_macro <flags>): Likewise.
gas/
* config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
(ppc_insert_operand): Likewise.
(ppc_machine): Likewise.
* config/tc-ppc.h: #include "opcode/ppc.h"
(struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
(ppc_cpu): Update extern decl.
opcodes/
* ppc-dis.c (print_insn_powerpc): Update prototye to use new
ppc_cpu_t typedef.
(struct dis_private): New.
(POWERPC_DIALECT): New define.
(powerpc_dialect): Renamed to...
(powerpc_init_dialect): This. Update to use ppc_cpu_t and
struct dis_private.
(print_insn_big_powerpc): Update for using structure in
info->private_data.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Change type of dialect param to ppc_cpu_t.
(skip_optional_operands): Likewise.
(print_insn_powerpc): Likewise. Remove initialization of dialect.
* ppc-opc.c (extract_bat, extract_bba, extract_bdm, extract_bdp,
extract_bo, extract_boe, extract_fxm, extract_mb6, extract_mbe,
extract_nb, extract_nsi, extract_rbs, extract_sh6, extract_spr,
extract_sprg, extract_tbr insert_bat, insert_bba, insert_bdm,
insert_bdp, insert_bo, insert_boe, insert_fxm, insert_mb6, insert_mbe,
insert_nsi, insert_ral, insert_ram, insert_raq, insert_ras, insert_rbs,
insert_sh6, insert_spr, insert_sprg, insert_tbr): Change the dialect
param to be of type ppc_cpu_t. Update prototype.
2008-06-13 22:16:00 +02:00
|
|
|
|
ppc_cpu_t flags;
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
2009-01-09 19:50:58 +01:00
|
|
|
|
/* One bit flags for the opcode. These are used to indicate which
|
|
|
|
|
specific processors no longer support the instructions. The defined
|
|
|
|
|
values are listed below. */
|
|
|
|
|
ppc_cpu_t deprecated;
|
|
|
|
|
|
1999-05-03 09:29:11 +02:00
|
|
|
|
/* An array of operand codes. Each code is an index into the
|
|
|
|
|
operand table. They appear in the order which the operands must
|
|
|
|
|
appear in assembly code, and are terminated by a zero. */
|
|
|
|
|
unsigned char operands[8];
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* The table itself is sorted by major opcode number, and is otherwise
|
|
|
|
|
in the order in which the disassembler should consider
|
|
|
|
|
instructions. */
|
|
|
|
|
extern const struct powerpc_opcode powerpc_opcodes[];
|
|
|
|
|
extern const int powerpc_num_opcodes;
|
Add support for PowerPC VLE.
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 21:45:30 +02:00
|
|
|
|
extern const struct powerpc_opcode vle_opcodes[];
|
|
|
|
|
extern const int vle_num_opcodes;
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* Values defined for the flags field of a struct powerpc_opcode. */
|
|
|
|
|
|
|
|
|
|
/* Opcode is defined for the PowerPC architecture. */
|
2003-08-19 09:08:20 +02:00
|
|
|
|
#define PPC_OPCODE_PPC 1
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is defined for the POWER (RS/6000) architecture. */
|
2003-08-19 09:08:20 +02:00
|
|
|
|
#define PPC_OPCODE_POWER 2
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is defined for the POWER2 (Rios 2) architecture. */
|
2003-08-19 09:08:20 +02:00
|
|
|
|
#define PPC_OPCODE_POWER2 4
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is supported by the Motorola PowerPC 601 processor. The 601
|
|
|
|
|
is assumed to support all PowerPC (PPC_OPCODE_PPC) instructions,
|
|
|
|
|
but it also supports many additional POWER instructions. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_601 8
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is supported in both the Power and PowerPC architectures
|
2010-07-03 05:32:50 +02:00
|
|
|
|
(ie, compiler's -mcpu=common or assembler's -mcom). More than just
|
|
|
|
|
the intersection of PPC_OPCODE_PPC with the union of PPC_OPCODE_POWER
|
|
|
|
|
and PPC_OPCODE_POWER2 because many instructions changed mnemonics
|
|
|
|
|
between POWER and POWERPC. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_COMMON 0x10
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is supported for any Power or PowerPC platform (this is
|
|
|
|
|
for the assembler's -many option, and it eliminates duplicates). */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_ANY 0x20
|
|
|
|
|
|
|
|
|
|
/* Opcode is only defined on 64 bit architectures. */
|
|
|
|
|
#define PPC_OPCODE_64 0x40
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
1999-05-09 01:28:34 +02:00
|
|
|
|
/* Opcode is supported as part of the 64-bit bridge. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_64_BRIDGE 0x80
|
1999-05-09 01:28:34 +02:00
|
|
|
|
|
2000-05-04 00:19:45 +02:00
|
|
|
|
/* Opcode is supported by Altivec Vector Unit */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_ALTIVEC 0x100
|
[gas/ChangeLog]
* config/tc-ppc.c (md_parse_option): New -m7410, -m7450 and -m7455
flags, equivalent to -m7400. New -maltivec to enable AltiVec
instructions. New -mbook64 and -mbooke/-mbooke32 flags to enable
64-bit and 32-bit BookE support, respectively. Change -m403 and
-m405 to set PPC403 option.
(md_show_usage): Adjust for new options.
* doc/all.texi: Set PPC.
* doc/as.texinfo: Add PPC support and pull in c-ppc.texi.
* doc/c-ppc.texi: New file.
* doc/Makefile.am (CPU_DOCS): Add c-ppc.texi.
* doc/Makefile.in: Regenerate.
[gas/testsuite/ChangeLog]
* gas/ppc/booke.s: New test for Motorola BookE.
* gas/ppc/booke.d: New file.
* gas/ppc/ppc.exp: Test booke.s.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE, PPC_OPCODE_403): New opcode flags for
BookE and PowerPC403 instructions.
[opcodes/ChangeLog]
* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
instruction field instruction/extraction functions for new BookE
DE form instructions.
(CT): New macro for CT field in an X form instruction.
(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
instructions.
(PPC64): Don't include PPC_OPCODE_PPC.
(403): New opcode macro for PPC403 processors.
(BOOKE): New opcode macro for BookE processors.
(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
for a disassembler option of `booke', `booke32' or `booke64' to enable
BookE support in the disassembler.
2001-10-13 03:59:09 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is supported by PowerPC 403 processor. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_403 0x200
|
[gas/ChangeLog]
* config/tc-ppc.c (md_parse_option): New -m7410, -m7450 and -m7455
flags, equivalent to -m7400. New -maltivec to enable AltiVec
instructions. New -mbook64 and -mbooke/-mbooke32 flags to enable
64-bit and 32-bit BookE support, respectively. Change -m403 and
-m405 to set PPC403 option.
(md_show_usage): Adjust for new options.
* doc/all.texi: Set PPC.
* doc/as.texinfo: Add PPC support and pull in c-ppc.texi.
* doc/c-ppc.texi: New file.
* doc/Makefile.am (CPU_DOCS): Add c-ppc.texi.
* doc/Makefile.in: Regenerate.
[gas/testsuite/ChangeLog]
* gas/ppc/booke.s: New test for Motorola BookE.
* gas/ppc/booke.d: New file.
* gas/ppc/ppc.exp: Test booke.s.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE, PPC_OPCODE_403): New opcode flags for
BookE and PowerPC403 instructions.
[opcodes/ChangeLog]
* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
instruction field instruction/extraction functions for new BookE
DE form instructions.
(CT): New macro for CT field in an X form instruction.
(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
instructions.
(PPC64): Don't include PPC_OPCODE_PPC.
(403): New opcode macro for PPC403 processors.
(BOOKE): New opcode macro for BookE processors.
(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
for a disassembler option of `booke', `booke32' or `booke64' to enable
BookE support in the disassembler.
2001-10-13 03:59:09 +02:00
|
|
|
|
|
2002-01-03 03:07:19 +01:00
|
|
|
|
/* Opcode is supported by PowerPC BookE processor. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_BOOKE 0x400
|
2003-08-19 09:08:20 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is supported by PowerPC 440 processor. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_440 0x800
|
2000-05-04 00:19:45 +02:00
|
|
|
|
|
2002-02-25 04:42:59 +01:00
|
|
|
|
/* Opcode is only supported by Power4 architecture. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_POWER4 0x1000
|
2002-02-25 04:42:59 +01:00
|
|
|
|
|
gas/
* config/tc-ppc.c (pre_defined_registers): Add "f32" to "f63",
"f.32" to "f.63", "vs0" to "vs63" and "vs.0" to "vs.63".
(parse_cpu): Extend -mpower7 to accept power7 and isel instructions.
gas/testsuite/
* gas/ppc/e500mc.d ("wait", "waitsrv", "waitimpl"): Add tests.
* gas/ppc/e500mc.s: Likewise.
* gas/ppc/power6.d ("cdtbcd", "cbcdtd", "addg6s"): Add tests.
* gas/ppc/power6.s: Likewise.
* gas/ppc/power7.d ("lfdpx", "mffgpr", "mftgpr"): Remove invalid tests.
("wait", "waitsrv", "waitimpl", "divwe", "divwe.", "divweo", "divweo.",
"divweu", "divweu.", "divweuo", "divweuo.", "bpermd", "popcntw",
"popcntd", "ldbrx", "stdbrx", "lfiwzx", "lfiwzx", "fcfids", "fcfids.",
"fcfidus", "fcfidus.", "fctiwu", "fctiwu.", "fctiwuz", "fctiwuz.",
"fctidu", "fctidu.", "fctiduz", "fctiduz.", "fcfidu", "fcfidu.",
"ftdiv", "ftdiv", "ftsqrt", "ftsqrt", "dcbtt", "dcbtstt", "dcffix",
"dcffix.", "lbarx", "lbarx", "lbarx", "lharx", "lharx", "lharx",
"stbcx.", "sthcx.", "fre", "fre.", "fres", "fres.", "frsqrte",
"frsqrte.", "frsqrtes", "frsqrtes.", "isel"): Add tests.
* gas/ppc/power7.s: Likewise.
* gas/ppc/vsx.d: New test.
* gas/ppc/vsx.s: Likewise.
* gas/ppc/ppc.exp: Run it.
include/opcode/
* ppc.h (PPC_OPCODE_POWER7): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
the power7 and the isel instructions.
* ppc-opc.c (insert_xc6, extract_xc6): New static functions.
(insert_dm, extract_dm): Likewise.
(XB6): Update comment to include XX2 form.
(WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
(RemoveXX3DM): Delete.
(powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
"mftgpr">: Deprecate for POWER7.
<"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
"frsqrte.">: Deprecate the three operand form and enable the two
operand form for POWER7 and later.
<"wait">: Extend to accept optional parameter. Enable for POWER7.
<"waitsrv", "waitimpl">: Add extended opcodes.
<"ldbrx", "stdbrx">: Enable for POWER7.
<"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
<"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
"divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
"divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
"divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
"fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
"fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
"lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
<"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
"stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
"xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
"xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
"xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
"xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
"xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
"xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
"xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
"xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
"xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
"xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
"xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
"xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
"xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
"xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
"xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
"xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
"xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
"xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
"xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
"xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
"xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
"xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
"xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
"xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
"xxspltw", "xxswapd">: Add VSX opcodes.
2009-02-26 23:07:33 +01:00
|
|
|
|
/* Opcode is only supported by Power7 architecture. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_POWER7 0x2000
|
2002-08-19 22:55:48 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is only supported by e500x2 Core. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_SPE 0x4000
|
2002-08-19 22:55:48 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is supported by e500x2 Integer select APU. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_ISEL 0x8000
|
2002-08-19 22:55:48 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is an e500 SPE floating point instruction. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_EFS 0x10000
|
2002-08-19 22:55:48 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is supported by branch locking APU. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_BRLOCK 0x20000
|
2002-08-19 22:55:48 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is supported by performance monitor APU. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_PMR 0x40000
|
2002-08-19 22:55:48 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is supported by cache locking APU. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_CACHELCK 0x80000
|
2002-08-19 22:55:48 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is supported by machine check APU. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_RFMCI 0x100000
|
2002-08-19 22:55:48 +02:00
|
|
|
|
|
2005-05-19 08:59:36 +02:00
|
|
|
|
/* Opcode is only supported by Power5 architecture. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_POWER5 0x200000
|
2005-05-19 08:59:36 +02:00
|
|
|
|
|
2005-08-15 17:37:15 +02:00
|
|
|
|
/* Opcode is supported by PowerPC e300 family. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_E300 0x400000
|
2006-06-07 07:23:59 +02:00
|
|
|
|
|
|
|
|
|
/* Opcode is only supported by Power6 architecture. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_POWER6 0x800000
|
2006-06-07 07:23:59 +02:00
|
|
|
|
|
2006-10-24 03:27:29 +02:00
|
|
|
|
/* Opcode is only supported by PowerPC Cell family. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_CELL 0x1000000
|
2005-08-15 17:37:15 +02:00
|
|
|
|
|
binutils/
* doc/binutils.texi (objdump): Document -Mppcps.
gas/
* config/tc-ppc.c (parse_cpu): Handle "750cl".
(pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
(md_show_usage): Document -m750cl.
(md_assemble): Handle two delimiters in succession (eg. `),').
* doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
* testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
* testsuite/gas/ppc/ppc750ps.s: New file.
* testsuite/gas/ppc/ppc750ps.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_PPCPS): New.
opcodes/
* ppc-opc.c (PSW, PSWM, PSQ, PSQM, PSD, MTMSRD_L): New.
(XOPS, XOPS_MASK, XW, XW_MASK): Likewise.
(PPCPS): Likewise.
(powerpc_opcodes): Add all pair singles instructions.
* ppc-dis.c (powerpc_dialect): Handle "ppcps".
(print_ppc_disassembler_options): Document -Mppcps.
2007-08-24 02:56:30 +02:00
|
|
|
|
/* Opcode is supported by CPUs with paired singles support. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_PPCPS 0x2000000
|
binutils/
* doc/binutils.texi (objdump): Document -Mppcps.
gas/
* config/tc-ppc.c (parse_cpu): Handle "750cl".
(pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
(md_show_usage): Document -m750cl.
(md_assemble): Handle two delimiters in succession (eg. `),').
* doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
* testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
* testsuite/gas/ppc/ppc750ps.s: New file.
* testsuite/gas/ppc/ppc750ps.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_PPCPS): New.
opcodes/
* ppc-opc.c (PSW, PSWM, PSQ, PSQM, PSD, MTMSRD_L): New.
(XOPS, XOPS_MASK, XW, XW_MASK): Likewise.
(PPCPS): Likewise.
(powerpc_opcodes): Add all pair singles instructions.
* ppc-dis.c (powerpc_dialect): Handle "ppcps".
(print_ppc_disassembler_options): Document -Mppcps.
2007-08-24 02:56:30 +02:00
|
|
|
|
|
2008-04-14 13:01:38 +02:00
|
|
|
|
/* Opcode is supported by Power E500MC */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_E500MC 0x4000000
|
2008-04-14 13:01:38 +02:00
|
|
|
|
|
2008-07-30 08:29:22 +02:00
|
|
|
|
/* Opcode is supported by PowerPC 405 processor. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_405 0x8000000
|
2008-07-30 08:29:22 +02:00
|
|
|
|
|
gas/
* config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
Handle -mvsx and -mpower7.
(md_show_usage): Document -mpower7 and -mvsx.
* doc/as.texinfo (Target PowerPC): Document -mvsx.
* doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
gas/testsuite/
* gas/ppc/power7.d: New.
* gas/ppc/power7.s: Likewise.
* gas/ppc/ppc.exp: Run power7 test.
include/opcode/
* ppc.h (PPC_OPCODE_VSX, PPC_OPERAND_VSR): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle power7 and vsx options.
(print_insn_powerpc): Prepend 'vs' when printing VSX registers.
(print_ppc_disassembler_options): Document -Mpower7 and -Mvsx.
* ppc-opc.c (insert_xt6): New static function.
(extract_xt6): Likewise.
(insert_xa6): Likewise.
(extract_xa6: Likewise.
(insert_xb6): Likewise.
(extract_xb6): Likewise.
(insert_xb6s): Likewise.
(extract_xb6s): Likewise.
(XS6, XT6, XA6, XB6, XB6S, DM, XX3, XX3DM, XX1_MASK, XX3_MASK,
XX3DM_MASK, PPCVSX): New.
(powerpc_opcodes): Add opcodes "lxvd2x", "lxvd2ux", "stxvd2x",
"stxvd2ux", "xxmrghd", "xxmrgld", "xxpermdi", "xvmovdp", "xvcpsgndp".
2008-08-02 06:38:51 +02:00
|
|
|
|
/* Opcode is supported by Vector-Scalar (VSX) Unit */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_VSX 0x10000000
|
gas/
* config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
Handle -mvsx and -mpower7.
(md_show_usage): Document -mpower7 and -mvsx.
* doc/as.texinfo (Target PowerPC): Document -mvsx.
* doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
gas/testsuite/
* gas/ppc/power7.d: New.
* gas/ppc/power7.s: Likewise.
* gas/ppc/ppc.exp: Run power7 test.
include/opcode/
* ppc.h (PPC_OPCODE_VSX, PPC_OPERAND_VSR): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle power7 and vsx options.
(print_insn_powerpc): Prepend 'vs' when printing VSX registers.
(print_ppc_disassembler_options): Document -Mpower7 and -Mvsx.
* ppc-opc.c (insert_xt6): New static function.
(extract_xt6): Likewise.
(insert_xa6): Likewise.
(extract_xa6: Likewise.
(insert_xb6): Likewise.
(extract_xb6): Likewise.
(insert_xb6s): Likewise.
(extract_xb6s): Likewise.
(XS6, XT6, XA6, XB6, XB6S, DM, XX3, XX3DM, XX1_MASK, XX3_MASK,
XX3DM_MASK, PPCVSX): New.
(powerpc_opcodes): Add opcodes "lxvd2x", "lxvd2ux", "stxvd2x",
"stxvd2ux", "xxmrghd", "xxmrgld", "xxpermdi", "xvmovdp", "xvcpsgndp".
2008-08-02 06:38:51 +02:00
|
|
|
|
|
gas/
* config/tc-ppc.c (md_show_usage): Document -mpcca2.
* doc/c-ppc.texi (PowerPC-Opts): Document -mppca2.
gas/testsuite/
* gas/ppc/a2.s: New.
* gas/ppc/a2.d: Likewise.
* gas/ppc/ppc.exp: Run the a2 dump test.
include/opcode/
* ppc.h (PPC_OPCODE_PPCA2): New.
opcodes/
* ppc-dis.c (ppc_opts): Add "ppca2" entry.
* ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
ici mnemonics.
(ERAT_T): New operand.
(XWC_MASK): New mask.
(XOPL2): New macro.
(PPCA2): Define.
2009-09-21 12:29:07 +02:00
|
|
|
|
/* Opcode is supported by A2. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_A2 0x20000000
|
gas/
* config/tc-ppc.c (md_show_usage): Document -mpcca2.
* doc/c-ppc.texi (PowerPC-Opts): Document -mppca2.
gas/testsuite/
* gas/ppc/a2.s: New.
* gas/ppc/a2.d: Likewise.
* gas/ppc/ppc.exp: Run the a2 dump test.
include/opcode/
* ppc.h (PPC_OPCODE_PPCA2): New.
opcodes/
* ppc-dis.c (ppc_opts): Add "ppca2" entry.
* ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
ici mnemonics.
(ERAT_T): New operand.
(XWC_MASK): New mask.
(XOPL2): New macro.
(PPCA2): Define.
2009-09-21 12:29:07 +02:00
|
|
|
|
|
2009-10-02 16:42:42 +02:00
|
|
|
|
/* Opcode is supported by PowerPC 476 processor. */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_476 0x40000000
|
2009-10-02 16:42:42 +02:00
|
|
|
|
|
2010-02-08 02:59:38 +01:00
|
|
|
|
/* Opcode is supported by AppliedMicro Titan core */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_TITAN 0x80000000
|
2010-02-08 02:59:38 +01:00
|
|
|
|
|
2010-06-14 16:48:05 +02:00
|
|
|
|
/* Opcode which is supported by the e500 family */
|
2010-07-03 08:51:56 +02:00
|
|
|
|
#define PPC_OPCODE_E500 0x100000000ull
|
2010-06-14 16:48:05 +02:00
|
|
|
|
|
include/opcode/
* ppc.h: Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR.
opcodes/
* ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
* ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
(PPCVEC2, PPCTMR, E6500): New short names.
(powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
optional operands on sync instruction for E6500 target.
bfd/
* archures.c: Add bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add entryies for
bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
gas/
* config/tc-ppc.c (md_show_usage): Document -me5500 and -me6500.
(ppc_handle_align): Add termination nop opcode for e500mc family.
* doc/as.texinfo: Document options -me5500 and -me6500.
* doc/c-ppc.texi: Likewise.
gas/testsuite/
* gas/ppc/e500mc64_nop.s: New test case for e500mc family
termination nops.
* gas/ppc/e500mc64_nop.d: Likewise.
* gas/ppc/e5500_nop.s: Likewise.
* gas/ppc/e5500_nop.d: Likewise.
* gas/ppc/e6500_nop.s: Likewise.
* gas/ppc/e6500_nop.d: Likewise.
* gas/ppc/e6500.s: New.
* gas/ppc/e6500.d: Likewise.
* gas/ppc/ppc.exp: Run e6500, e500mc64_nop, e5500_nop, and e6500_nop.
2012-03-10 00:39:06 +01:00
|
|
|
|
/* Opcode is supported by Extended Altivec Vector Unit */
|
|
|
|
|
#define PPC_OPCODE_ALTIVEC2 0x200000000ull
|
|
|
|
|
|
|
|
|
|
/* Opcode is supported by Power E6500 */
|
|
|
|
|
#define PPC_OPCODE_E6500 0x400000000ull
|
|
|
|
|
|
|
|
|
|
/* Opcode is supported by Thread management APU */
|
|
|
|
|
#define PPC_OPCODE_TMR 0x800000000ull
|
|
|
|
|
|
Add support for PowerPC VLE.
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 21:45:30 +02:00
|
|
|
|
/* Opcode which is supported by the VLE extension. */
|
|
|
|
|
#define PPC_OPCODE_VLE 0x1000000000ull
|
|
|
|
|
|
include/opcode/
* ppc.h (PPC_OPCODE_POWER8): New define.
(PPC_OPCODE_HTM): Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Add "power8", "pwr8" and "htm" entries.
* ppc-opc.c (HTM_R, HTM_SI, XRTRB_MASK, XRTRARB_MASK, XRTLRARB_MASK,
XRTARARB_MASK, XRTBFRARB_MASK, XRCL, POWER8, PPCHTM): New defines.
(SH6): Update.
<"tabort.", "tabortdc.", "tabortdci.", "tabortwc.",
"tabortwci.", "tbegin.", "tcheck", "tend.", "trechkpt.",
"treclaim.", "tsr.">: Add POWER8 HTM opcodes.
<"tendall.", "tresume.", "tsuspend.">: Add POWER8 HTM extended opcodes.
gas/
* doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* config/tc-ppc.c (md_show_usage): Likewise.
(ppc_handle_align): Handle power8's group ending nop.
gas/testsuite/
* gas/ppc/htm.d: New test.
* gas/ppc/htm.s: Likewise.
* gas/ppc/power8.d: Likewise.
* gas/ppc/power8.s: Likewise.
* gas/ppc/ppc.exp: Run them.
2013-01-11 03:25:36 +01:00
|
|
|
|
/* Opcode is only supported by Power8 architecture. */
|
|
|
|
|
#define PPC_OPCODE_POWER8 0x2000000000ull
|
|
|
|
|
|
|
|
|
|
/* Opcode which is supported by the Hardware Transactional Memory extension. */
|
|
|
|
|
/* Currently, this is the same as the POWER8 mask. If another cpu comes out
|
|
|
|
|
that isn't a superset of POWER8, we can define this to its own mask. */
|
|
|
|
|
#define PPC_OPCODE_HTM PPC_OPCODE_POWER8
|
|
|
|
|
|
1999-05-03 09:29:11 +02:00
|
|
|
|
/* A macro to extract the major opcode from an instruction. */
|
|
|
|
|
#define PPC_OP(i) (((i) >> 26) & 0x3f)
|
Add support for PowerPC VLE.
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 21:45:30 +02:00
|
|
|
|
|
|
|
|
|
/* A macro to determine if the instruction is a 2-byte VLE insn. */
|
|
|
|
|
#define PPC_OP_SE_VLE(m) ((m) <= 0xffff)
|
|
|
|
|
|
|
|
|
|
/* A macro to extract the major opcode from a VLE instruction. */
|
|
|
|
|
#define VLE_OP(i,m) (((i) >> ((m) <= 0xffff ? 10 : 26)) & 0x3f)
|
|
|
|
|
|
|
|
|
|
/* A macro to convert a VLE opcode to a VLE opcode segment. */
|
|
|
|
|
#define VLE_OP_TO_SEG(i) ((i) >> 1)
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* The operands table is an array of struct powerpc_operand. */
|
|
|
|
|
|
|
|
|
|
struct powerpc_operand
|
|
|
|
|
{
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
/* A bitmask of bits in the operand. */
|
|
|
|
|
unsigned int bitm;
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
Add support for PowerPC VLE.
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 21:45:30 +02:00
|
|
|
|
/* The shift operation to be applied to the operand. No shift
|
|
|
|
|
is made if this is zero. For positive values, the operand
|
|
|
|
|
is shifted left by SHIFT. For negative values, the operand
|
|
|
|
|
is shifted right by -SHIFT. Use PPC_OPSHIFT_INV to indicate
|
|
|
|
|
that BITM and SHIFT cannot be used to determine where the
|
|
|
|
|
operand goes in the insn. */
|
1999-05-03 09:29:11 +02:00
|
|
|
|
int shift;
|
|
|
|
|
|
|
|
|
|
/* Insertion function. This is used by the assembler. To insert an
|
|
|
|
|
operand value into an instruction, check this field.
|
|
|
|
|
|
|
|
|
|
If it is NULL, execute
|
Add support for PowerPC VLE.
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 21:45:30 +02:00
|
|
|
|
if (o->shift >= 0)
|
|
|
|
|
i |= (op & o->bitm) << o->shift;
|
|
|
|
|
else
|
|
|
|
|
i |= (op & o->bitm) >> -o->shift;
|
1999-05-03 09:29:11 +02:00
|
|
|
|
(i is the instruction which we are filling in, o is a pointer to
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
this structure, and op is the operand value).
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
If this field is not NULL, then simply call it with the
|
|
|
|
|
instruction and the operand value. It will return the new value
|
|
|
|
|
of the instruction. If the ERRMSG argument is not NULL, then if
|
|
|
|
|
the operand value is illegal, *ERRMSG will be set to a warning
|
|
|
|
|
string (the operand will be inserted in any case). If the
|
|
|
|
|
operand value is legal, *ERRMSG will be unchanged (most operands
|
|
|
|
|
can accept any value). */
|
2003-08-07 04:25:50 +02:00
|
|
|
|
unsigned long (*insert)
|
include/opcode/
* ppc.h (ppc_cpu_t): New typedef.
(struct powerpc_opcode <flags>): Use it.
(struct powerpc_operand <insert, extract>): Likewise.
(struct powerpc_macro <flags>): Likewise.
gas/
* config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
(ppc_insert_operand): Likewise.
(ppc_machine): Likewise.
* config/tc-ppc.h: #include "opcode/ppc.h"
(struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
(ppc_cpu): Update extern decl.
opcodes/
* ppc-dis.c (print_insn_powerpc): Update prototye to use new
ppc_cpu_t typedef.
(struct dis_private): New.
(POWERPC_DIALECT): New define.
(powerpc_dialect): Renamed to...
(powerpc_init_dialect): This. Update to use ppc_cpu_t and
struct dis_private.
(print_insn_big_powerpc): Update for using structure in
info->private_data.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Change type of dialect param to ppc_cpu_t.
(skip_optional_operands): Likewise.
(print_insn_powerpc): Likewise. Remove initialization of dialect.
* ppc-opc.c (extract_bat, extract_bba, extract_bdm, extract_bdp,
extract_bo, extract_boe, extract_fxm, extract_mb6, extract_mbe,
extract_nb, extract_nsi, extract_rbs, extract_sh6, extract_spr,
extract_sprg, extract_tbr insert_bat, insert_bba, insert_bdm,
insert_bdp, insert_bo, insert_boe, insert_fxm, insert_mb6, insert_mbe,
insert_nsi, insert_ral, insert_ram, insert_raq, insert_ras, insert_rbs,
insert_sh6, insert_spr, insert_sprg, insert_tbr): Change the dialect
param to be of type ppc_cpu_t. Update prototype.
2008-06-13 22:16:00 +02:00
|
|
|
|
(unsigned long instruction, long op, ppc_cpu_t dialect, const char **errmsg);
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* Extraction function. This is used by the disassembler. To
|
|
|
|
|
extract this operand type from an instruction, check this field.
|
|
|
|
|
|
|
|
|
|
If it is NULL, compute
|
Add support for PowerPC VLE.
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 21:45:30 +02:00
|
|
|
|
if (o->shift >= 0)
|
|
|
|
|
op = (i >> o->shift) & o->bitm;
|
|
|
|
|
else
|
|
|
|
|
op = (i << -o->shift) & o->bitm;
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
if ((o->flags & PPC_OPERAND_SIGNED) != 0)
|
|
|
|
|
sign_extend (op);
|
1999-05-03 09:29:11 +02:00
|
|
|
|
(i is the instruction, o is a pointer to this structure, and op
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
is the result).
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
If this field is not NULL, then simply call it with the
|
|
|
|
|
instruction value. It will return the value of the operand. If
|
|
|
|
|
the INVALID argument is not NULL, *INVALID will be set to
|
|
|
|
|
non-zero if this operand type can not actually be extracted from
|
|
|
|
|
this operand (i.e., the instruction does not match). If the
|
|
|
|
|
operand is valid, *INVALID will not be changed. */
|
include/opcode/
* ppc.h (ppc_cpu_t): New typedef.
(struct powerpc_opcode <flags>): Use it.
(struct powerpc_operand <insert, extract>): Likewise.
(struct powerpc_macro <flags>): Likewise.
gas/
* config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
(ppc_insert_operand): Likewise.
(ppc_machine): Likewise.
* config/tc-ppc.h: #include "opcode/ppc.h"
(struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
(ppc_cpu): Update extern decl.
opcodes/
* ppc-dis.c (print_insn_powerpc): Update prototye to use new
ppc_cpu_t typedef.
(struct dis_private): New.
(POWERPC_DIALECT): New define.
(powerpc_dialect): Renamed to...
(powerpc_init_dialect): This. Update to use ppc_cpu_t and
struct dis_private.
(print_insn_big_powerpc): Update for using structure in
info->private_data.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Change type of dialect param to ppc_cpu_t.
(skip_optional_operands): Likewise.
(print_insn_powerpc): Likewise. Remove initialization of dialect.
* ppc-opc.c (extract_bat, extract_bba, extract_bdm, extract_bdp,
extract_bo, extract_boe, extract_fxm, extract_mb6, extract_mbe,
extract_nb, extract_nsi, extract_rbs, extract_sh6, extract_spr,
extract_sprg, extract_tbr insert_bat, insert_bba, insert_bdm,
insert_bdp, insert_bo, insert_boe, insert_fxm, insert_mb6, insert_mbe,
insert_nsi, insert_ral, insert_ram, insert_raq, insert_ras, insert_rbs,
insert_sh6, insert_spr, insert_sprg, insert_tbr): Change the dialect
param to be of type ppc_cpu_t. Update prototype.
2008-06-13 22:16:00 +02:00
|
|
|
|
long (*extract) (unsigned long instruction, ppc_cpu_t dialect, int *invalid);
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* One bit syntax flags. */
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* Elements in the table are retrieved by indexing with values from
|
|
|
|
|
the operands field of the powerpc_opcodes table. */
|
|
|
|
|
|
|
|
|
|
extern const struct powerpc_operand powerpc_operands[];
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
extern const unsigned int num_powerpc_operands;
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
Add support for PowerPC VLE.
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 21:45:30 +02:00
|
|
|
|
/* Use with the shift field of a struct powerpc_operand to indicate
|
|
|
|
|
that BITM and SHIFT cannot be used to determine where the operand
|
|
|
|
|
goes in the insn. */
|
|
|
|
|
#define PPC_OPSHIFT_INV (-1 << 31)
|
|
|
|
|
|
1999-05-03 09:29:11 +02:00
|
|
|
|
/* Values defined for the flags field of a struct powerpc_operand. */
|
|
|
|
|
|
|
|
|
|
/* This operand takes signed values. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_SIGNED (0x1)
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* This operand takes signed values, but also accepts a full positive
|
|
|
|
|
range of values when running in 32 bit mode. That is, if bits is
|
|
|
|
|
16, it takes any value from -0x8000 to 0xffff. In 64 bit mode,
|
|
|
|
|
this flag is ignored. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_SIGNOPT (0x2)
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* This operand does not actually exist in the assembler input. This
|
|
|
|
|
is used to support extended mnemonics such as mr, for which two
|
|
|
|
|
operands fields are identical. The assembler should call the
|
|
|
|
|
insert function with any op value. The disassembler should call
|
|
|
|
|
the extract function, ignore the return value, and check the value
|
|
|
|
|
placed in the valid argument. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_FAKE (0x4)
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* The next operand should be wrapped in parentheses rather than
|
|
|
|
|
separated from this one by a comma. This is used for the load and
|
|
|
|
|
store instructions which want their operands to look like
|
|
|
|
|
reg,displacement(reg)
|
|
|
|
|
*/
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_PARENS (0x8)
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* This operand may use the symbolic names for the CR fields, which
|
|
|
|
|
are
|
|
|
|
|
lt 0 gt 1 eq 2 so 3 un 3
|
|
|
|
|
cr0 0 cr1 1 cr2 2 cr3 3
|
|
|
|
|
cr4 4 cr5 5 cr6 6 cr7 7
|
|
|
|
|
These may be combined arithmetically, as in cr2*4+gt. These are
|
|
|
|
|
only supported on the PowerPC, not the POWER. */
|
Add support for PowerPC VLE.
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 21:45:30 +02:00
|
|
|
|
#define PPC_OPERAND_CR_BIT (0x10)
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* This operand names a register. The disassembler uses this to print
|
|
|
|
|
register names with a leading 'r'. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_GPR (0x20)
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
opcodes/
* ppc-dis.c (print_insn_powerpc): Don't print tabs. Handle
PPC_OPERANDS_GPR_0.
* ppc-opc.c (RA0): Define.
(RAQ, RAL, RAM, RAS, RSQ, RTQ, RSO): Use PPC_OPERAND_GPR_0.
(RAOPT): Rename from RAO. Update all uses.
(powerpc_opcodes): Use RA0 as appropriate. Add "lsdx", "lsdi",
"stsdx", "stsdi", "lmd" and "stmd" insns.
include/opcode/
* ppc.h (PPC_OPERAND_GPR_0): Define. Bump other operand defines.
gas/testsuite/
Update gas/ppc/.
ld/testsuite/
Update ld-powerpc/.
2004-03-16 01:58:43 +01:00
|
|
|
|
/* Like PPC_OPERAND_GPR, but don't print a leading 'r' for r0. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_GPR_0 (0x40)
|
opcodes/
* ppc-dis.c (print_insn_powerpc): Don't print tabs. Handle
PPC_OPERANDS_GPR_0.
* ppc-opc.c (RA0): Define.
(RAQ, RAL, RAM, RAS, RSQ, RTQ, RSO): Use PPC_OPERAND_GPR_0.
(RAOPT): Rename from RAO. Update all uses.
(powerpc_opcodes): Use RA0 as appropriate. Add "lsdx", "lsdi",
"stsdx", "stsdi", "lmd" and "stmd" insns.
include/opcode/
* ppc.h (PPC_OPERAND_GPR_0): Define. Bump other operand defines.
gas/testsuite/
Update gas/ppc/.
ld/testsuite/
Update ld-powerpc/.
2004-03-16 01:58:43 +01:00
|
|
|
|
|
1999-05-03 09:29:11 +02:00
|
|
|
|
/* This operand names a floating point register. The disassembler
|
|
|
|
|
prints these with a leading 'f'. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_FPR (0x80)
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* This operand is a relative branch displacement. The disassembler
|
|
|
|
|
prints these symbolically if possible. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_RELATIVE (0x100)
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* This operand is an absolute branch address. The disassembler
|
|
|
|
|
prints these symbolically if possible. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_ABSOLUTE (0x200)
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* This operand is optional, and is zero if omitted. This is used for
|
2004-09-09 14:42:37 +02:00
|
|
|
|
example, in the optional BF field in the comparison instructions. The
|
1999-05-03 09:29:11 +02:00
|
|
|
|
assembler must count the number of operands remaining on the line,
|
|
|
|
|
and the number of operands remaining for the opcode, and decide
|
|
|
|
|
whether this operand is present or not. The disassembler should
|
|
|
|
|
print this operand out only if it is not zero. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_OPTIONAL (0x400)
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* This flag is only used with PPC_OPERAND_OPTIONAL. If this operand
|
|
|
|
|
is omitted, then for the next operand use this operand value plus
|
|
|
|
|
1, ignoring the next operand field for the opcode. This wretched
|
|
|
|
|
hack is needed because the Power rotate instructions can take
|
|
|
|
|
either 4 or 5 operands. The disassembler should print this operand
|
|
|
|
|
out regardless of the PPC_OPERAND_OPTIONAL field. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_NEXT (0x800)
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* This operand should be regarded as a negative number for the
|
|
|
|
|
purposes of overflow checking (i.e., the normal most negative
|
|
|
|
|
number is disallowed and one more than the normal most positive
|
|
|
|
|
number is allowed). This flag will only be set for a signed
|
|
|
|
|
operand. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_NEGATIVE (0x1000)
|
2000-05-04 00:19:45 +02:00
|
|
|
|
|
|
|
|
|
/* This operand names a vector unit register. The disassembler
|
|
|
|
|
prints these with a leading 'v'. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_VR (0x2000)
|
2000-05-04 00:19:45 +02:00
|
|
|
|
|
2001-08-27 12:26:57 +02:00
|
|
|
|
/* This operand is for the DS field in a DS form instruction. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_DS (0x4000)
|
2003-06-10 09:44:11 +02:00
|
|
|
|
|
|
|
|
|
/* This operand is for the DQ field in a DQ form instruction. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_DQ (0x8000)
|
|
|
|
|
|
2007-05-02 13:24:17 +02:00
|
|
|
|
/* Valid range of operand is 0..n rather than 0..n-1. */
|
include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 14:25:15 +02:00
|
|
|
|
#define PPC_OPERAND_PLUS1 (0x10000)
|
2008-07-30 08:29:22 +02:00
|
|
|
|
|
|
|
|
|
/* Xilinx APU and FSL related operands */
|
|
|
|
|
#define PPC_OPERAND_FSL (0x20000)
|
|
|
|
|
#define PPC_OPERAND_FCR (0x40000)
|
|
|
|
|
#define PPC_OPERAND_UDI (0x80000)
|
gas/
* config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
Handle -mvsx and -mpower7.
(md_show_usage): Document -mpower7 and -mvsx.
* doc/as.texinfo (Target PowerPC): Document -mvsx.
* doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
gas/testsuite/
* gas/ppc/power7.d: New.
* gas/ppc/power7.s: Likewise.
* gas/ppc/ppc.exp: Run power7 test.
include/opcode/
* ppc.h (PPC_OPCODE_VSX, PPC_OPERAND_VSR): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle power7 and vsx options.
(print_insn_powerpc): Prepend 'vs' when printing VSX registers.
(print_ppc_disassembler_options): Document -Mpower7 and -Mvsx.
* ppc-opc.c (insert_xt6): New static function.
(extract_xt6): Likewise.
(insert_xa6): Likewise.
(extract_xa6: Likewise.
(insert_xb6): Likewise.
(extract_xb6): Likewise.
(insert_xb6s): Likewise.
(extract_xb6s): Likewise.
(XS6, XT6, XA6, XB6, XB6S, DM, XX3, XX3DM, XX1_MASK, XX3_MASK,
XX3DM_MASK, PPCVSX): New.
(powerpc_opcodes): Add opcodes "lxvd2x", "lxvd2ux", "stxvd2x",
"stxvd2ux", "xxmrghd", "xxmrgld", "xxpermdi", "xvmovdp", "xvcpsgndp".
2008-08-02 06:38:51 +02:00
|
|
|
|
|
|
|
|
|
/* This operand names a vector-scalar unit register. The disassembler
|
|
|
|
|
prints these with a leading 'vs'. */
|
|
|
|
|
#define PPC_OPERAND_VSR (0x100000)
|
Add support for PowerPC VLE.
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 21:45:30 +02:00
|
|
|
|
|
|
|
|
|
/* This is a CR FIELD that does not use symbolic names. */
|
|
|
|
|
#define PPC_OPERAND_CR_REG (0x200000)
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* The POWER and PowerPC assemblers use a few macros. We keep them
|
|
|
|
|
with the operands table for simplicity. The macro table is an
|
|
|
|
|
array of struct powerpc_macro. */
|
|
|
|
|
|
|
|
|
|
struct powerpc_macro
|
|
|
|
|
{
|
|
|
|
|
/* The macro name. */
|
|
|
|
|
const char *name;
|
|
|
|
|
|
|
|
|
|
/* The number of operands the macro takes. */
|
|
|
|
|
unsigned int operands;
|
|
|
|
|
|
|
|
|
|
/* One bit flags for the opcode. These are used to indicate which
|
|
|
|
|
specific processors support the instructions. The values are the
|
|
|
|
|
same as those for the struct powerpc_opcode flags field. */
|
include/opcode/
* ppc.h (ppc_cpu_t): New typedef.
(struct powerpc_opcode <flags>): Use it.
(struct powerpc_operand <insert, extract>): Likewise.
(struct powerpc_macro <flags>): Likewise.
gas/
* config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
(ppc_insert_operand): Likewise.
(ppc_machine): Likewise.
* config/tc-ppc.h: #include "opcode/ppc.h"
(struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
(ppc_cpu): Update extern decl.
opcodes/
* ppc-dis.c (print_insn_powerpc): Update prototye to use new
ppc_cpu_t typedef.
(struct dis_private): New.
(POWERPC_DIALECT): New define.
(powerpc_dialect): Renamed to...
(powerpc_init_dialect): This. Update to use ppc_cpu_t and
struct dis_private.
(print_insn_big_powerpc): Update for using structure in
info->private_data.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Change type of dialect param to ppc_cpu_t.
(skip_optional_operands): Likewise.
(print_insn_powerpc): Likewise. Remove initialization of dialect.
* ppc-opc.c (extract_bat, extract_bba, extract_bdm, extract_bdp,
extract_bo, extract_boe, extract_fxm, extract_mb6, extract_mbe,
extract_nb, extract_nsi, extract_rbs, extract_sh6, extract_spr,
extract_sprg, extract_tbr insert_bat, insert_bba, insert_bdm,
insert_bdp, insert_bo, insert_boe, insert_fxm, insert_mb6, insert_mbe,
insert_nsi, insert_ral, insert_ram, insert_raq, insert_ras, insert_rbs,
insert_sh6, insert_spr, insert_sprg, insert_tbr): Change the dialect
param to be of type ppc_cpu_t. Update prototype.
2008-06-13 22:16:00 +02:00
|
|
|
|
ppc_cpu_t flags;
|
1999-05-03 09:29:11 +02:00
|
|
|
|
|
|
|
|
|
/* A format string to turn the macro into a normal instruction.
|
|
|
|
|
Each %N in the string is replaced with operand number N (zero
|
|
|
|
|
based). */
|
|
|
|
|
const char *format;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
extern const struct powerpc_macro powerpc_macros[];
|
|
|
|
|
extern const int powerpc_num_macros;
|
|
|
|
|
|
2012-11-23 04:28:13 +01:00
|
|
|
|
extern ppc_cpu_t ppc_parse_cpu (ppc_cpu_t, ppc_cpu_t *, const char *);
|
2009-03-10 07:53:46 +01:00
|
|
|
|
|
1999-05-03 09:29:11 +02:00
|
|
|
|
#endif /* PPC_H */
|