On ARMv6-M and ARMv7-M, the exception return address is sort of magic
address defined by the manual. This patch is to let GDB well handle
these magic addresses.
2016-09-27 Fredrik Hederstierna <fredrik.hederstierna@verisure.com>
* arm-tdep.c (arm_m_addr_is_magic): New function.
(arm_addr_bits_remove): Call arm_m_addr_is_magic.
(arm_m_exception_unwind_sniffer): Likewise.
This patch extends Tag_GNU_Power_ABI_FP to cover long double ABIs,
makes the assembler warn about undefined tag values, and removes
similar warnings from the linker. I think it is better to not
warn in the linker about undefined tag values as future extensions to
the tags then won't result in likely bogus warnings. This is
consistent with the fact that an older linker won't warn on an
entirely new tag.
include/
* elf/ppc.h (Tag_GNU_Power_ABI_FP): Comment.
bfd/
* elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Declare.
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): New function.
(ppc_elf_merge_obj_attributes): Use it. Don't copy first file
attributes, merge them. Don't warn about undefined tag bits,
or copy unknown values to output.
* elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Call
_bfd_elf_ppc_merge_fp_attributes.
binutils/
* readelf.c (display_power_gnu_attribute): Catch truncated section
for all powerpc attributes. Display long double ABI. Don't
capitalize words, except for names. Show known bits of tag values
when some unknown bits are present. Whitespace fixes.
gas/
* config/tc-ppc.c (ppc_elf_gnu_attribute): New function.
(md_pseudo_table <ELF>): Handle "gnu_attribute".
ld/
* testsuite/ld-powerpc/attr-gnu-4-4.s: Delete.
* testsuite/ld-powerpc/attr-gnu-4-14.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-24.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-34.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-41.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Adjust expected warning.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-01.d: Adjust expected output.
* testsuite/ld-powerpc/attr-gnu-4-02.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-03.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-10.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-11.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-20.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-22.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-33.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-8-11.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Don't run deleted tests.
get_coff_symbol_type had a potenial buffer overflow even with
untranslated messages.
* nm.c (get_elf_symbol_type): Don't use sprintf with translated
strings, use asprintf instead.
(get_coff_symbol_type): Likewise.
When I read the GDBserver debug message, I find the "entering" of
linux_wait_1 doesn't match the "existing" of linux_wait_1. Looks
we don't call debug_exit somewhere in linux_wait_1 on return.
gdb/gdbserver:
2016-09-26 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_wait_1): Call debug_exit.
One use of target_mourn_interior seems to have been missed in bc1e6c81
gdb/ChangeLog:
2016-09-23 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (windows_delete_thread): Adjusting call to
target_mourn_inferior to include ptid_t argument.
This patch changes some code in cli-cmds.c to use std::string rather
than dyn-string, removing some cleanups. Since this was the last use
of dyn-string in gdb, this patch also removes
make_cleanup_dyn_string_delete.
2016-09-23 Tom Tromey <tom@tromey.com>
* utils.h (make_cleanup_dyn_string_delete): Remove declaration.
* utils.c: Don't include dyn-string.h.
(do_dyn_string_delete, make_cleanup_dyn_string_delete): Remove.
* cli/cli-cmds.c: Include <string>. Don't include dyn-string.h.
(argv_to_string): Rename. Change return type to std::string.
(alias_command): Use std::string.
This patch changes a spot in objfiles.c to use a std::vector, removing
a cleanup.
2016-09-23 Tom Tromey <tom@tromey.com>
* objfiles.c: Include <vector>.
(objfile_relocate): Use std::vector.
This patch changes some spots in rust-lang.c to use std::string or
std::vector, removing some cleanups.
2016-09-23 Tom Tromey <tom@tromey.com>
* rust-lang.c: Include <string> and <vector>.
(rust_evaluate_funcall): Use std::vector, std::string.
(rust_evaluate_subexp): Use std::string.
(rust_lookup_symbol_nonlocal): Use std::string.
This changes a few spots in cp-namespace.c to use std::string,
removing some cleanups.
2016-09-23 Tom Tromey <tom@tromey.com>
* cp-namespace.c: Include <string>.
(cp_search_static_and_baseclasses)
(cp_lookup_symbol_imports_or_template, find_symbol_in_baseclass):
Use std::string.
This changes one spot in break-catch-sig.c to use std::string,
removing some cleanups.
2016-09-23 Tom Tromey <tom@tromey.com>
* break-catch-sig.c: Include <string>.
(signal_catchpoint_print_one): Use std::string.
This patch removes some unnecessary code. In particular,
terminate_minimal_symbol_table is declared in minsyms.h, so it doesn't
need to be declared in objfiles.h as well. And,
restore_ui_out_closure was rendered unnecessary by an earlier patch,
so the structure definition can be removed now.
I'm checking this in as obvious.
Tested by rebuilding on x86-64 Fedora 24 with --enable-targets=all;
which would notice any missing includes of minsyms.h.
2016-09-23 Tom Tromey <tom@tromey.com>
* utils.c (struct restore_ui_out_closure): Remove.
* objfiles.h (terminate_minimal_symbol_table): Don't declare.
I see the following build warning when I build GDB with GCC trunk.
../../binutils-gdb/gdb/nat/linux-osdata.c: In function ‘LONGEST linux_xfer_osdata_fds(gdb_byte*, ULONGEST, ULONGEST)’:
../../binutils-gdb/gdb/nat/linux-osdata.c:767:1: error: ‘%s’ directive writing between 0 and 255 bytes into a region of size 11 [-Werror=format-length=]
linux_xfer_osdata_fds (gdb_byte *readbuf,
^~~~~~~~~~~~~~~~~~~~~
../../binutils-gdb/gdb/nat/linux-osdata.c:800:51: note: format output between 7 and 262 bytes into a destination of size 17
sprintf (procentry, "/proc/%s", dp->d_name);
^
../../binutils-gdb/gdb/nat/linux-osdata.c: In function ‘LONGEST linux_xfer_osdata_threads(gdb_byte*, ULONGEST, ULONGEST)’:
../../binutils-gdb/gdb/nat/linux-osdata.c:555:1: error: ‘%s’ directive writing between 0 and 255 bytes into a region of size 11 [-Werror=format-length=]
linux_xfer_osdata_threads (gdb_byte *readbuf,
^~~~~~~~~~~~~~~~~~~~~~~~~
../../binutils-gdb/gdb/nat/linux-osdata.c:588:51: note: format output between 7 and 262 bytes into a destination of size 17
sprintf (procentry, "/proc/%s", dp->d_name);
^
cc1plus: all warnings being treated as errors
The warning is a false positive, but we can workaround it by replacing
sprintf with xsnprintf. On the other hand, it is always preferred to
use xsnprintf.
gdb:
2016-09-23 Yao Qi <yao.qi@linaro.org>
* nat/linux-osdata.c (linux_xfer_osdata_threads): Replace
sprintf with xsnprintf.
(linux_xfer_osdata_fds): Likewise.
If xmalloc fails allocating memory, usually because something tried a
huge allocation, like xmalloc(-1) or some such, GDB asks the user what
to do:
.../src/gdb/utils.c:1079: internal-error: virtual memory exhausted.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
If the user says "n", that throws a QUIT exception, which is caught by
one of the multiple CATCH(RETURN_MASK_ALL) blocks somewhere up the
stack.
The default implementations of operator new / operator new[] call
malloc directly, and on memory allocation failure throw
std::bad_alloc. Currently, if that happens, since nothing catches it,
the exception escapes out of main, and GDB aborts from unhandled
exception.
This patch replaces the default operator new variants with versions
that, just like xmalloc:
#1 - Raise an internal-error on memory allocation failure.
#2 - Throw a QUIT gdb_exception, so that the exact same CATCH blocks
continue handling memory allocation problems.
A minor complication of #2 is that operator new can _only_ throw
std::bad_alloc, or something that extends it:
void* operator new (std::size_t size) throw (std::bad_alloc);
That means that if we let a gdb QUIT exception escape from within
operator new, the C++ runtime aborts due to unexpected exception
thrown.
So to bridge the gap, this patch adds a new gdb_quit_bad_alloc
exception type that inherits both std::bad_alloc and gdb_exception,
and throws _that_.
If we decide that we should be catching memory allocation errors in
fewer places than all the places we currently catch them (everywhere
we use RETURN_MASK_ALL currently), then we could change operator new
to throw plain std::bad_alloc then. But I'm considering such a change
as separate matter from this one -- it'd make sense to do the same to
xmalloc at the same time, for instance.
Meanwhile, this allows using new/new[] instead of xmalloc/XNEW/etc.
without losing the "virtual memory exhausted" internal-error
safeguard.
Tested on x86_64 Fedora 23.
gdb/ChangeLog:
2016-09-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/new-op.c.
(COMMON_OBS): Add common/new-op.o.
(new-op.o): New rule.
* common/common-exceptions.h: Include <new>.
(struct gdb_quit_bad_alloc): New type.
* common/new-op.c: New file.
gdb/gdbserver/ChangeLog:
2016-09-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/new-op.c.
(OBS): Add common/new-op.o.
(new-op.o): New rule.
PR ld/20595
ld * testsuite/ld-arm/unwind-4.d: Add -q option to linker command
line and -r option to objdump command line. Match emitted relocs
to make sure that superflous relocs are not generated.
bfd * elf-bfd.h (struct elf_backend_data): Add
elf_backend_count_output_relocs callback to count relocations in
the final output.
* elf-arm.c (elf32_arm_add_relocation): Deleted.
(elf32_arm_write_section): Move additional relocation to emit_relocs.
(elf32_arm_count_output_relocs): New function.
(emit_relocs): New function.
(elf32_arm_emit_relocs): New function.
(elf32_arm_vxworks_emit_relocs): New function.
(elf_backend_emit_relocs): Updated to use the new functions.
(elf_backend_count_output_relocs): New define.
* bfd/elflink.c (bfd_elf_final_link): Do not add additional_reloc_count
to the relocation count.
(_bfd_elf_link_size_reloc_section): Use callback to count the
relocations which will be in output.
(_bfd_elf_default_count_output_relocs): New function.
* bfd/elfxx-target.h (elf_backend_count_output_relocs): New define.
In commit 6423214f (testsuite: Don't use expect_background to reap
gdbserver), we override gdb_exit in lib/gdbserver-support.exp, so
that we can close gdbserver first. However, we don't close gdbserver
in mi_gdb_exit. This makes a problem in my aarch64 mulit-arch testing,
in which I run some mi tests, mi-watch.exp for example, in different
variations (aarch64 and arm),
Schedule of variations:
junor0-2
junor0-2-arm/-marm
junor0-2-arm/-mthumb
When the test is done in the first variation (aarch64), test case is
recompiled for arm, but GDBserver with aarch64 program is still
running. When the second variation is started, GDB loads arm program,
but GDBserver still loads aarch64 program because the old GDBserver
process is using it. We'll get,
47-target-select remote junor0-2:2350^M
&"warning: Selected architecture arm is not compatible with reported target architecture aarch64\n"^M
&"warning: Architecture rejected target-supplied description\n"
This patch fixes this problem by closing GDBserver in mi_gdb_exit.
gdb/testsuite:
2016-09-22 Yao Qi <yao.qi@linaro.org>
* lib/gdbserver-support.exp: Rename mi_gdb_exit.
(gdb_exit): Rename it to ...
(gdbserver_gdb_exit): ... Close GDBserver.
(gdb_exit): New proc, call gdbserver_gdb_exit.
(mi_gdb_exit): Likewise.
I was notified by buildbot that my patch (commit 6ec2b2) has broken the build
on x86_64:
../../binutils-gdb/gdb/rs6000-tdep.c: In function int ppc_process_record_op31(gdbarch*, regcache*, CORE_ADDR, uint32_t):
../../binutils-gdb/gdb/rs6000-tdep.c:4705:50: error: cannot convert CORE_ADDR* {aka long unsigned int*} to ULONGEST* {aka long long unsigned int*} for argument 3 to register_status regcache_raw_read_unsigned(regcache*, int, ULONGEST*)
tdep->ppc_gp0_regnum + PPC_RA (insn), &ea);
^
../../binutils-gdb/gdb/rs6000-tdep.c:4718:50: error: cannot convert CORE_ADDR* {aka long unsigned int*} to ULONGEST* {aka long long unsigned int*} for argument 3 to register_status regcache_raw_read_unsigned(regcache*, int, ULONGEST*)
tdep->ppc_gp0_regnum + PPC_RA (insn), &ea);
^
The patch below should fix it.
gdb/ChangeLog:
2016-09-22 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* rs6000-tdep.c (ppc_process_record_op31): Fix
regcache_raw_read_unsigned call using the correct parameter type.
This patch is to make remote-gdbserver-on-localhost.exp use gdbserver-base
and remove duplicated code.
gdb/testsuite:
2016-09-22 Yao Qi <yao.qi@linaro.org>
* boards/gdbserver-base.exp (gdb_server_prog): Set the absolute
path.
* boards/remote-gdbserver-on-localhost.exp: Use gdbserver-base.
Remove duplication.
Replace printf ("%p") with printf ("%s", host_address_to_string ()). Printing
host addrss might make sense here because pointers can be null and this would
affect how function behaves.
This particular warning is printed only when option -Wari is passed to
contrib/ari/gdb_ari.sh
gdb/ChangeLog:
* arc-tdep.c: Fix ARI warning for printf(%p).
In lib/gdbserver-support.exp, we rename gdb_exit to
gdbserver_orig_gdb_exit, but we check the existence gdbserver_gdb_exit.
We should check gdbserver_orig_gdb_exit instead. Looks it is a typo
or an oversight.
gdb/testsuite:
2016-09-22 Yao Qi <yao.qi@linaro.org>
* lib/gdbserver-support.exp: Check the existence of
gdbserver_orig_gdb_exit rather than gdbserver_gdb_exit.
ARC is a family of licensable processors developed by Synopsys.
This is an initial patch that doesn't yet support some of the features, that
are already available in Synopsys' fork of GDB, namely:
* longjmp support
* signal frame handling
* prologue analysis
* Linux targets support
* native Linux support
ARC cores are configurable and extensible, which means from debugger
perspective that some registers and debug capabilities are optional, therefore
it is up to the GDB stub to determine exact list of register available on
target and supply it to GDB via XML target descriptions. List of registers
that is known to GDB and is required is intentionally kept small to simplify
requirements to GDB stub and implementation of a GDB client.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add arc-tdep.o.
(HFILES_NO_SRCDIR): Add arc-tdep.h.
(ALLDEPFILES): Add arc-tdep.c.
* NEWS: Mention new ARC port.
* configure.tgt: Add ARC.
* arc-tdep.c: New file.
* arc-tdep.h: New file.
* features/Makefile (XMLTOC): Add arc-v2.xml and arc-arcompact.xml.
* features/arc-v2.xml: New file.
* features/arc-v2.c: New file (generated).
* features/arc-arcompact.xml: New file.
* features/arc-arcompact.c: New file (generated).
gdb/doc/ChangeLog:
* gdb.texinfo (Embedded Processors): Document ARC.
(Synopsys ARC): New section.
(Standard Target Features): Document ARC features.
(ARC Features): New section.
gdb/testsuite/ChangeLog:
* gdb.xml/tdesc-regs.exp: set core-regs for arc*-*-elf32.
some instruction handlers in ppc_process_record_op63() seem to be missing
return or incorrectly using break. This patch aims to fix that.
gdb/ChangeLog:
2016-09-21 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* rs6000-tdep.c (ppc_process_record_op63): Fix return of instruction
handlers.
This fixes PR gdb/20604. The bug here is that passing an invalid
expression to "quit" -- e.g., "quit()" -- causes gdb to enter a
non-functioning state.
The immediate problem is that quit_force resets the terminal before
evaluating the expression. However, it seemed to me that it doesn't
really make sense to pass the quit_force argument to kill_or_detach
(which passes it to to_detach), first because conflating the exit
status for "quit" and the signal to pass when detaching doesn't make
sense, and second because to_detach implementations generally only
accept a constant here, while "quit" accepts an expression. So, I
removed that.
As an aside, I think the "detach SIGNO" functionality is not
documented.
Built and regtested on x86-64 Fedora 24.
2016-09-21 Tom Tromey <tom@tromey.com>
PR gdb/20604:
* top.h (quit_force): Update.
* top.c (quit_force): Changed type of first argument. Don't
evaluate expression. Pass NULL to kill_or_detach.
* cli/cli-cmds.c (quit_command): Evaluate "args".
2016-09-21 Tom Tromey <tom@tromey.com>
PR gdb/20604:
* gdb.base/quit.exp: New file.
This patch adds a bunch of generated files to gdb's gitignore files.
There are still a bunch of "stamp" files that are not ignored, but I
think the rule for them should be put in the top-level gitignore.
Users and developers are encouraged to build out-of-tree, but some
people prefer the simplicity to build in-tree, so it should be useful
for them.
gdb/ChangeLog:
* .gitignore: Ignore more files.
* data-directory/.gitignore: Likewise.
gdb/doc/ChangeLog:
* .gitignore: New file.
gdb/gdbserver/ChangeLog:
* .gitinore: Ignore more files.
gdb/testsuite/ChangeLog:
* .gitignore: New file.
One of the review comments from the SVE series was that it would
be better to use "must" rather than "should" in error messages.
I think this patch fixes all cases in the AArch64 code.
It also uses "must be" instead of "expected to be".
opcodes/
* aarch64-opc.c (operand_general_constraint_met_p): Use "must be"
rather than "should be" or "expected to be" in error messages.
gas/
* config/tc-aarch64.c (output_operand_error_record): Use "must be"
rather than "should be" or "expected to be" in error messages.
(parse_operands): Likewise.
* testsuite/gas/aarch64/diagnostic.l: Likewise.
* testsuite/gas/aarch64/legacy_reg_names.l: Likewise.
* testsuite/gas/aarch64/sve-invalid.l: Likewise.
* testsuite/gas/aarch64/sve-reg-diagnostic.l: Likewise.
SVE defines new names for existing NZCV conditions, to reflect the
result of instructions like PTEST. This patch adds support for these
names.
The patch also adds comments to the disassembly output to show the
alternative names of a condition code. For example:
cinv x0, x1, cc
becomes:
cinv x0, x1, cc // cc = lo, ul, last
and:
b.cc f0 <...>
becomes:
b.cc f0 <...> // b.lo, b.ul, b.last
Doing this for the SVE names follows the practice recommended by the
SVE specification and is definitely useful when reading SVE code.
If the feeling is that it's too distracting elsewhere, we could add
an option to turn it off.
include/
* opcode/aarch64.h (aarch64_cond): Bump array size to 4.
opcodes/
* aarch64-dis.c (remove_dot_suffix): New function, split out from...
(print_mnemonic_name): ...here.
(print_comment): New function.
(print_aarch64_insn): Call it.
* aarch64-opc.c (aarch64_conds): Add SVE names.
(aarch64_print_operand): Print alternative condition names in
a comment.
gas/
* config/tc-aarch64.c (opcode_lookup): Search for the end of
a condition name, rather than assuming that it will have exactly
2 characters.
(parse_operands): Likewise.
* testsuite/gas/aarch64/alias.d: Add new condition-code comments
to the expected output.
* testsuite/gas/aarch64/beq_1.d: Likewise.
* testsuite/gas/aarch64/float-fp16.d: Likewise.
* testsuite/gas/aarch64/int-insns.d: Likewise.
* testsuite/gas/aarch64/no-aliases.d: Likewise.
* testsuite/gas/aarch64/programmer-friendly.d: Likewise.
* testsuite/gas/aarch64/reloc-insn.d: Likewise.
* testsuite/gas/aarch64/b_c_1.d, testsuite/gas/aarch64/b_c_1.s:
New test.
ld/
* testsuite/ld-aarch64/emit-relocs-280.d: Match branch comments.
* testsuite/ld-aarch64/weak-undefined.d: Likewise.
This patch adds new tests for SVE. It also extends diagnostic.[sl] with
checks for some inappropriate uses of MUL and MUL VL in base AArch64
instructions.
gas/testsuite/
* gas/aarch64/diagnostic.s, gas/aarch64/diagnostic.l: Add tests for
invalid uses of MUL VL and MUL in base AArch64 instructions.
* gas/aarch64/sve-add.s, gas/aarch64/sve-add.d, gas/aarch64/sve-dup.s,
gas/aarch64/sve-dup.d, gas/aarch64/sve-invalid.s,
gas/aarch64/sve-invalid.d, gas/aarch64/sve-invalid.l,
gas/aarch64/sve-reg-diagnostic.s, gas/aarch64/sve-reg-diagnostic.d,
gas/aarch64/sve-reg-diagnostic.l, gas/aarch64/sve.s,
gas/aarch64/sve.d: New tests.
The main purpose of the SVE aarch64_insn_classes is to describe how
an index into an aarch64_opnd_qualifier_seq_t is represented in the
instruction encoding. Other instructions usually use flags for this
information, but (a) we're running out of those and (b) the iclass
would otherwise be unused for SVE.
include/
* opcode/aarch64.h (sve_cpy, sve_index, sve_limm, sve_misc)
(sve_movprfx, sve_pred_zm, sve_shift_pred, sve_shift_unpred)
(sve_size_bhs, sve_size_bhsd, sve_size_hsd, sve_size_sd): New
aarch64_insn_classes.
opcodes/
* aarch64-opc.h (FLD_SVE_M_4, FLD_SVE_M_14, FLD_SVE_M_16)
(FLD_SVE_sz, FLD_SVE_tsz, FLD_SVE_tszl_8, FLD_SVE_tszl_19): New
aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries.
* aarch64-asm.c (aarch64_get_variant): New function.
(aarch64_encode_variant_using_iclass): Likewise.
(aarch64_opcode_encode): Call it.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): New function.
(aarch64_opcode_decode): Call it.
SVE uses some new fields to store W, X and scalar FP registers.
This patch adds corresponding operands.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_Rm): New aarch64_opnd.
(AARCH64_OPND_SVE_Rn_SP, AARCH64_OPND_SVE_VZn, AARCH64_OPND_SVE_Vd)
(AARCH64_OPND_SVE_Vm, AARCH64_OPND_SVE_Vn): Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE core
and FP register operands.
* aarch64-opc.h (FLD_SVE_Rm, FLD_SVE_Rn, FLD_SVE_Vd, FLD_SVE_Vm)
(FLD_SVE_Vn): New aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries.
(aarch64_print_operand): Handle the new SVE core and FP register
operands.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm-2.c: Likewise.
* aarch64-dis-2.c: Likewise.
gas/
* config/tc-aarch64.c (parse_operands): Handle the new SVE core
and FP register operands.
Simon Marchi
Nick Clifton
Fredrik Hederstierna
GDB Administrator
Trevor Saunders
Vlad Zakharov
Awson
Claudiu Zissulescu
Alan Modra
Yao Qi
Jon Turney
Tom Tromey
Pedro Alves
Akihiko Odaki
Andreas Krebbel
Edjunior Barbosa Machado
Anton Kolesov
Thomas Preud'homme
Simon Marchi
Richard Sandiford