AVX "VMOVQ xmm1, xmm2/m64" and "VMOVQ xmm1/m64, xmm2" can only be
encoded with VEX.128. Set Vex=1 on VEX.128 only vmovq and update
assembler tests.
gas/
PR gas/23665
* testsuite/gas/i386/avx-scalar-intel.d: Updated.
* testsuite/gas/i386/avx-scalar.d: Likewise.
* testsuite/gas/i386/x86-64-avx-scalar-intel.d: Likewise.
* testsuite/gas/i386/x86-64-avx-scalar.d: Likewise.
opcodes/
PR gas/23665
* i386-dis.c (vex_len_table): Update VEX_LEN_0F7E_P_1 and
VEX_LEN_0FD6_P_2 entries.
* i386-opc.tbl: Set Vex=1 on VEX.128 only vmovq.
* i386-tbl.h: Regenerated.
Add VEXWIG, defined as 3, to indicate that the VEX.W/EVEX.W bit is
ignored by such VEX/EVEX instructions, aka WIG instructions. Set
VexW=3 on VEX/EVEX WIG instructions. Update assembler to check
VEXWIG when setting the VEX.W bit.
gas/
PR gas/23642
* config/tc-i386.c (build_vex_prefix): Check VEXWIG when setting
the VEX.W bit.
(build_evex_prefix): Check VEXWIG when setting the EVEX.W bit.
opcodes/
PR gas/23642
* i386-opc.h (VEXWIG): New.
* i386-opc.tbl: Set VexW=3 on VEX/EVEX WIG instructions.
* i386-tbl.h: Regenerated.
Update x86 disassembler to ignore the EVEX.W bit in EVEX vcvt[u]si2s[sd]
instructions in 32-bit mode.
gas/
PR binutils/23655
* testsuite/gas/i386/evex.d: New file.
* testsuite/gas/i386/evex.s: Likewise.
* testsuite/gas/i386/i386.exp: Run evex.
opcodes/
PR binutils/23655
* i386-dis-evex.h (evex_table): Replace Eq with Edqa for
vcvtsi2ss%LQ, vcvtsi2sd%LQ, vcvtusi2ss%LQ and vcvtusi2sd%LQ.
* i386-dis.c (Edqa): New.
(dqa_mode): Likewise.
(intel_operand_size): Handle dqa_mode as m_mode.
(OP_E_register): Handle dqa_mode as dq_mode.
(OP_E_memory): Set shift for dqa_mode based on address_mode.
Just like other insns having byte and word forms, these can also make
use of the W modifier, which at the same time allows simplifying some
other code a little bit.
Various moves come in load and store forms, and just like on the GPR
and FPU sides there would better be only one pattern. In some cases this
is not feasible because the opcodes are too different, but quite a few
cases follow a similar standard scheme. Introduce Opcode_SIMD_FloatD and
Opcode_SIMD_IntD, generalize handling in operand_size_match() (reverse
operand handling there simply needs to match "straight" operand one),
and fix a long standing, but so far only latent bug with when to zap
found_reverse_match.
Also once again drop IgnoreSize where pointlessly applied to templates
touched anyway as well as *word when redundant with Reg*.
2018-08-29 Kito Cheng <kito@andestech.com>
gas/
* config/tc-riscv.c (riscv_subset_supports): New argument:
xlen_required.
(riscv_multi_subset_supports): New function, able to check more
than one extension.
(riscv_ip): Use riscv_multi_subset_supports instead of
riscv_subset_supports.
(riscv_set_arch): Update call-site for riscv_subset_supports.
(riscv_after_parse_args): Likewise.
include/
*opcode/riscv.h (MAX_SUBSET_NUM): New.
(riscv_opcode): Add xlen_requirement field and change type of
subset.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Check XLEN by
riscv_opcode.xlen_requirement.
* riscv-opc.c (riscv_opcodes): Update for struct change.
Partial write %PSR (PWRPSR) is a SPARC V8e option that allows the WRPSR
instruction to only affect the %PSR.ET field. When available it is enabled
by setting the rd field of the WRPSR instruction to a value other than 0.
For Leon processors with support for partial write %PSR (currently GR740
and GR716) the rd value must be 1.
opcodes/ChangeLog:
2018-08-29 Martin Aberg <maberg@gaisler.com>
* sparc-opc.c (sparc_opcodes): Add Leon specific partial write
psr (PWRPSR) instruction.
gas/ChangeLog:
2018-08-29 Daniel Cederman <cederman@gaisler.com>
* testsuite/gas/sparc/leon.d: New test.
* testsuite/gas/sparc/leon.s: New test.
* testsuite/gas/sparc/sparc.exp: Execute the pwrpsr test.
Most optional operands to powerpc instructions use a default value of
zero, but there are a few exceptions. Those have been handled by
PPC_OPERAND_OPTIONAL_VALUE and an entry in the powerpc_operands table
for the default value, smuggled in the shift field. This patch
changes that to using the operand extract function to provide non-zero
defaults.
I've also moved the code determining whether optional operands are
provided or omitted, to the point the first optional operand is seen,
and allowed for the possibility of optional base register operands
in a future patch.
The patch does change the error you get on invalid assembly like
ld 3,4
You'll now see "missing operand" rather than
"syntax error; end of line, expected `('".
gas/
* config/tc-ppc.c (md_assemble): Delay counting of optional
operands until one is encountered. Allow for the possibility
of optional base regs, ie. PPC_OPERAND_PARENS. Call
ppc_optional_operand_value with extra args.
include/
* opcode/ppc.h (struct powerpc_operand): Correct "insert" comment.
Mention use of "extract" function to provide default value.
(PPC_OPERAND_OPTIONAL_VALUE): Delete.
(ppc_optional_operand_value): Rewrite to use extract function.
opcodes/
* ppc-dis.c (operand_value_powerpc): Init "invalid".
(skip_optional_operands): Count optional operands, and update
ppc_optional_operand_value call.
* ppc-opc.c (extract_dxdn): Remove ATTRIBUTE_UNUSED from used arg.
(extract_vlensi): Likewise.
(extract_fxm): Return default value for missing optional operand.
(extract_ls, extract_raq, extract_tbr): Likewise.
(insert_sxl, extract_sxl): New functions.
(insert_esync, extract_esync): Remove Power9 handling and simplify.
(powerpc_operands <FXM4, TBR>): Delete PPC_OPERAND_OPTIONAL_VALUE
flag and extra entry.
(powerpc_operands <SXL>): Likewise, and use insert_sxl and
extract_sxl.
Bit manipulation instructions which are not normally generated by the
assembler, should nevertheless be decoded by the disassembler.
opcodes/
* s12z-dis.c: BM_RESERVED1 to behave like BM_OPR_REG, and
BM_RESERVED0 like BM_REG_IMM.
opcodes/
* s12z.h: Delete.
* s12z-dis.c: Adjust path of included file.
include/
* opcode/s12z.h: New file.
gas/
* config/tc-s12z.c: Adjust path of included file.
In 64-bit mode, display eiz for address with the addr32 prefix and without
base nor index registers. For
mov -0xccddef(,%eiz,), %rax
disassembler now displays:
67 48 8b 04 25 11 22 33 ff mov -0xccddef(,%eiz,1),%rax
instead of
67 48 8b 04 25 11 22 33 ff addr32 mov 0xffffffffff332211,%rax
gas/
* testsuite/gas/i386/evex-no-scale-64.d: Updated.
* testsuite/gas/i386/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.s: Add %eiz tests.
opcodes/
* i386-dis.c (OP_E_memory): In 64-bit mode, display eiz for
address with the addr32 prefix and without base nor index
registers.
There are separate CPUID feature bits for fxsave/fxrstor and cmovCC
instructions. This patch adds CpuCMOV and CpuFXSR to replace Cpu686
on corresponding instructions.
gas/
* config/tc-i386.c (cpu_arch): Add .cmov and .fxsr.
(cpu_noarch): Add nocmov and nofxsr.
* doc/c-i386.texi: Document cmov and fxsr.
opcodes/
* i386-gen.c (cpu_flag_init): Add CpuCMOV and CpuFXSR to
CPU_I686_FLAGS. Add CPU_CMOV_FLAGS, CPU_FXSR_FLAGS,
CPU_ANY_CMOV_FLAGS and CPU_ANY_FXSR_FLAGS.
(cpu_flags): Add CpuCMOV and CpuFXSR.
* i386-opc.tbl: Replace Cpu686 with CpuFXSR on fxsave, fxsave64,
fxrstor and fxrstor64. Replace Cpu686 with CpuCMOV on cmovCC.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
H.J. Lu
Jan Beulich
John Darrington
Jim Wilson
Martin Aberg
Chenghua Xu
Alan Modra