This changes the printf command's %s and %ls formats to special-case
NULL, and print "(null)" for these. This is PR cli/14977. This
behavior seems a bit friendlier; I was undecided on whether other
invalid pointers should be handled specially somehow, so for the time
being I've left those out.
gdb/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/14977:
* printcmd.c (printf_c_string, printf_wide_c_string): Special case
for NULL.
gdb/gdbserver/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/14977:
* ax.c (ax_printf): Special case for NULL.
gdb/testsuite/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/14977:
* gdb.base/printcmds.exp (test_printf): Add printf test of %s with
a null pointer.
* gdb.base/wchar.exp: Likewise.
PR cli/19918 points out that a printf format like "%-5p" will cause a
gdb crash. The bug is problem is that printf_pointer doesn't take the
"-" flag into account.
gdb/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/19918:
* printcmd.c (printf_pointer): Allow "-" in format.
gdb/testsuite/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/19918:
* gdb.base/printcmds.exp (test_printf): Add printf test using '-'
flag.
This patch adds the "Usage:" text to the printf command's help text,
and tries to improve the text a tiny bit.
gdb/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
* printcmd.c (_initialize_printcmd): Add usage to printf.
This calculation in relocate_section
if (stub_entry->stub_type == ppc_stub_save_res)
relocation += (stub_sec->output_offset
+ stub_sec->output_section->vma
+ stub_sec->size - htab->sfpr->size
- htab->sfpr->output_offset
- htab->sfpr->output_section->vma);
to adjust from the original out-of-line save/restore function address
in sfpr to a copy at the end of stub_sec goes wrong when stub_sec is
padded, because the copy is no longer at the end of stub_sec. The
solution is to pad before copying sfpr, so the copy is always at the
end of stub_sec.
* elf64-ppc.c (sfpr_define): Adjust for stub_sec size having
sfpr size added before defining alias symbols.
(ppc64_elf_build_stubs): Add stub section padding before
copying sfpr contents and defining save/restore alias symbols.
Extend
commit b7c871edcd
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed May 17 07:57:15 2017 -0700
Mark debug sections referenced by kept debug sections
to handle the local debug definition section.
bfd/
PR ld/20882
* elflink.c (elf_gc_mark_debug_section): Also check the local
debug definition section.
ld/
PR ld/20882
* testsuite/ld-gc/pr20882.d: Also dump and check .debug_abbrev
section.
* testsuite/ld-gc/pr20882b.s: Add .debug_abbrev section.
This patches removes cleanups from a couple of spots by using
std::string rather than manual memory management.
Regression tested by the buildbot, though note that I don't believe
the buildbot actually exercises the machoread code.
gdb/ChangeLog
2018-03-13 Tom Tromey <tom@tromey.com>
* machoread.c (macho_check_dsym): Change filenamep to a
std::string*.
(macho_symfile_read): Update.
* symfile.c (load_command): Use std::string.
PR 22955
* stabs.c (parse_number): Add p_end parameter and use it to check
the validity of the pp parameter. Add checks to prevent walking
off the end of the string buffer.
(parse_stab_string): Likewise.
(parse_stab_type): Likewise.
(parse_stab_type_number): Likewise.
(parse_stab_range_type): Likewise.
(parse_stab_sun_builtin_type): Likewise.
(parse_stab_sun_floating_type): Likewise.
(parse_stab_enum_type): Likewise.
(parse_stab_struct_type): Likewise.
(parse_stab_baseclasses): Likewise.
(parse_stab_struct_fields): Likewise.
(parse_stab_cpp_abbrev): Likewise.
(parse_stab_one_struct_field): Likewise.
(parse_stab_members): Likewise.
(parse_stab_tilde_field): Likewise.
(parse_stab_array_type): Likewise.
* parse_stab: Compute the end of the string and then pass it on to
individual parser functions.
PR 22113
incldue * coff/pe.h (struct pex64_unwind_info): Add a rawUnwindCodesEnd
field.
bfd * pei-x86_64.c (pex64_get_unwind_info): Change to a boolean
function. Add an end address parameter. Check access of the data
pointer to make sure that they do not extend beyond the end
address. Return FALSE if any check fails. Add the end address
pointer to the ui structure.
(pex64_xdata_print_uwd_codes): Check accesses of the raw unwind
codes to make sure that they do not extend beyond the end address
pointer. Print an error message and return immediately if any
check fails.
Fix some ARI issues in recently added riscv code, the ARI email is:
https://sourceware.org/ml/gdb-patches/2018-03/msg00156.html
gdb/ChangeLog:
* riscv-tdep.c (riscv_sw_breakpoint_from_kind): Add localization
to error message string.
(riscv_register_name): Use xsnprintf instead of sprintf.
(riscv_insn::fetch_instruction): Use gdb_assert instead of
internal_error.
(riscv_print_arg_location): Use gdb_assert_not_reached instead of
error.
(riscv_push_dummy_call): Likewise.
This changes a couple of spots that read section data to use
gdb::byte_vector rather than a cleanup.
Regression tested by the buildbot. I am not certain that the buildbot
actually tests the code in question, so I recommend careful review.
gdb/ChangeLog
2018-03-12 Tom Tromey <tom@tromey.com>
* rs6000-aix-tdep.c (rs6000_aix_core_xfer_shared_libraries_aix):
Use gdb::byte_vector.
* arm-tdep.c (arm_exidx_new_objfile): Use gdb::byte_vector.
Commit 849d0ba8 breaks GDB build for ia64 with --with-libunwind-ia64=yes.
This patch fixes it.
gdb:
2018-03-12 Yao Qi <yao.qi@linaro.org>
* ia64-libunwind-tdep.c (libunwind_get_reg_special): Change
parameter type to readable_regcache.
* ia64-libunwind-tdep.h (libunwind_get_reg_special): Update
the declaration.
This changes dwarf2read.c to use std::vector rather than a linked list
when managing the fields and base classes to be added to a type. This
removes some bookkeeping types and also allows the removal of some
cleanups.
gdb/ChangeLog
2018-03-11 Tom Tromey <tom@tromey.com>
* dwarf2read.c (struct nextfield): Add initializers.
(struct nextfnfield): Remove.
(struct fnfieldlist): Add initializers. Remove "length" and
"head", use std::vector.
(struct decl_field_list): Remove.
(struct field_info): Add initializers.
<fields, baseclasses>: Now std::vector.
<nbaseclasses, nfnfields, typedef_field_list_count,
nested_types_list_count>: Remove.
(dwarf2_add_field, dwarf2_add_type_defn)
(dwarf2_attach_fields_to_type, dwarf2_add_member_fn)
(dwarf2_attach_fn_fields_to_type, handle_struct_member_die)
(process_structure_scope): Update.
This removes a cleanup from build_type_psymtabs_1, by using
std::vector rather than manual memory management.
gdb/ChangeLog
2018-03-11 Tom Tromey <tom@tromey.com>
* dwarf2read.c (sort_tu_by_abbrev_offset): Change to be suitable
for use by std::sort.
(build_type_psymtabs_1): Use std::vector.
Following on from PR 22929, I have found the same problem exists with
other ifunc supporting targets too. Plus see this link for the bug
being reported against the s390x binutils for Fedora rawhide:
https://bugzilla.redhat.com/show_bug.cgi?id=1553705
So I am going to check in the patch below which applies the same
change that H.J. made for the x86_64 target to the other affected
targets. (Specifically: S390, AArch64 and Sparc). Plus it adds a new
test to the linker testsuite to make sure that this problem stays
fixed.
bfd * elf64-s390.c (elf_s390_relocate_section): Move check for
relocations against non-allocated sections to before the code that
handles ifunc relocations.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Treat
relocs against IFUNC symbols in non-allocated sections as relocs
against FUNC symbols.
* elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Likewise.
ld * testsuite/ld-ifunc/ifuncmod5.s: New test. Checks that targets
that support IFUNC symbols can handle relocations against those
symbols in NOTE sections.
* testsuite/ld-ifunc/ifuncmod5.d: New file: Driver for the new
test.
* testsuite/ld-ifunc/ifunc.exp: Run the new test.
This adds display of a few recently added optional features.
gdb/ChangeLog:
2018-03-09 Eli Zaretskii <eliz@gnu.org>
* top.c (print_gdb_configuration): Reflect LIBIPT, LIBMEMCHECK,
and LIBMPFR in the printed configuration.
Since the addition of pseudo prefixes changed how the scrubber treats
'{', we need to explicitly strip whitespace in check_VecOperations ().
* config/tc-i386.c (check_VecOperations): Strip whitespace.
* testsuite/gas/i386/optimize-1.s: Add whitespaces before
{%k7} and {z},
* testsuite/gas/i386/x86-64-optimize-2.s: Likewise.
This changes a few more places to use scoped_fd. This allows the
removal of some cleanups.
Regression tested by the buildbot, though note that I'm not sure
whether the buildbot actually builds anything using all of these
files.
gdb/ChangeLog
2018-03-08 Tom Tromey <tom@tromey.com>
* source.c (get_filename_and_charpos): Use scoped_fd.
* nto-procfs.c (procfs_open_1): Use scoped_fd.
(procfs_pidlist): Likewise.
* procfs.c (proc_get_LDT_entry): Use scoped_fd.
(iterate_over_mappings): Likewise.
This started as a patch to change enable_thread_stack_temporaries to
be an RAII class, but then I noticed that this code used a VEC, so I
went ahead and did a bit more C++-ification, changing
stack_temporaries_enabled to a bool and changing stack_temporaries to
a std::vector.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-08 Tom Tromey <tom@tromey.com>
* infcall.c (struct call_return_meta_info)
<stack_temporaries_enabled>: Remove.
(get_call_return_value, call_function_by_hand_dummy): Update.
* thread.c (disable_thread_stack_temporaries): Remove.
(enable_thread_stack_temporaries): Remove.
(thread_stack_temporaries_enabled_p): Return bool.
(push_thread_stack_temporary, value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Update.
* eval.c (evaluate_subexp): Update.
* gdbthread.h (class enable_thread_stack_temporaries): Now a
class, not a function.
(value_ptr, value_vec): Remove typedefs.
(class thread_info) <stack_temporaries_enabled>: Now bool.
<stack_temporaries>: Now a std::vector.
(thread_stack_temporaries_enabled_p)
(value_in_thread_stack_temporaries): Return bool.
We can optimize AVX512 instructions with EVEX128 only if AVX512VL is
enabled:
1. Instruction is an AVX512VL instruction. Or
2. AVX512VL is enabled explicitly by -march=+avx512vl/".arch .avx512vl".
We should optimize EVEX instructions with EVEX128 encoding when pseudo
{evex} prefix is used.
* config/tc-i386.c (set_cpu_arch): Set cpu_arch_isa_flags.
(md_parse_option): Likewise.
(optimize_encoding): Check i.tm.cpu_flags and cpu_arch_isa_flags
for cpuavx512vl instead of cpu_arch_flags. Optimize EVEX with
EVEX128 when EVEX encoding is required.
* testsuite/gas/i386/i386.exp: Run optimize-4, optimize-5,
x86-64-optimize-5 and x86-64-optimize-6.
* testsuite/gas/i386/optimize-1.d: Updated.
* testsuite/gas/i386/x86-64-optimize-2.d: Likewise.
* testsuite/gas/i386/optimize-4.d: New file.
* testsuite/gas/i386/optimize-4.s: Likewise.
* testsuite/gas/i386/optimize-5.d: Likewise.
* testsuite/gas/i386/optimize-5.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-5.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-5.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-6.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-6.s: Likewise.
In remote.c, when the output of "set debug remote" is truncated, the
number of characters reported is incorrect. What is reported is the
number of characters added by the quoting, not the number of characters
that were truncated.
gdb/ChangeLog:
* remote.c (putpkt_binary): Fix omitted bytes reporting.
(getpkt_or_notif_sane_1): Likewise.
Using std::string here makes the string building simpler thank playing
with char*. A stack allocation is replaced with heap allocation, but
I don't think this is really performance-critical code.
gdb/ChangeLog:
* build-id.c (build_id_to_debug_bfd): Use std::string.
This patch makes the find_separate_debug_file* functions return
std::string, which allows to get rid of some manual memory management
and one cleanup.
gdb/ChangeLog:
* build-id.c (find_separate_debug_file_by_buildid): Return
std::string.
* build-id.h (find_separate_debug_file_by_buildid): Return
std::string.
* coffread.c (coff_symfile_read): Adjust to std::string.
* elfread.c (elf_symfile_read): Adjust to std::string.
* symfile.c (separate_debug_file_exists): Change parameter to
std::string.
(find_separate_debug_file): Return std::string.
(find_separate_debug_file_by_debuglink): Return std::string.
* symfile.h (find_separate_debug_file_by_debuglink): Return
std::string.
[This patch should go on top of "linux_qxfer_libraries_svr4: Use
std::string", I should have sent them together as a series.]
I noticed that linux_qxfer_libraries_svr4 used xml_escape_text, which
returns an std::string. That string is then copied into a larger
buffer. It would be more efficient if we had a version of
xml_escape_text which appended to an existing string instead of
returning a new one. This is what this patch does.
I manually verified that the output of linux_qxfer_libraries_svr4 didn't
change before/after the patch.
gdb/ChangeLog:
* common/xml-utils.c (xml_escape_text): Move code to...
(xml_escape_text_append): ... this new function.
* common/xml-utils.h (xml_escape_text_append): New declaration.
* unittests/xml-utils-selftests.c (test_xml_escape_text_append):
New function.
(_initialize_xml_utils): register test_xml_escape_text_append as
a selftest.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_qxfer_libraries_svr4): Use
xml_escape_text_append.
As described here
https://sourceware.org/bugzilla/show_bug.cgi?id=22841
there seems to be situations where the remote-stdio-gdbserver board
fails to delete the uploaded binary file. Passing "target" fixes the
issue for Christian who reported the bug.
I did not experience this problem, but passing "target" to remote_exec
still works for me, so I'm fine with changing it.
Any objection?
gdb/testsuite/ChangeLog:
PR gdb/22841
* boards/remote-stdio-gdbserver.exp (${board}_file): Pass
"target" to remote_exec.
Before patch
Make native gdbserver boards no longer be "remote" (in DejaGnu terms)
739b3f1d8f
the local gdbserver boards (except native-extended-gdbserver...) were
considered as remote by DejaGNU. To avoid DejaGNU trying to use ssh/scp
to download the files to the target (which is actually local), the
gdbserver-base.exp file defined some _download, _upload and _file board
operations to override the default behavior, and instead just use local
operations.
The same patch also changed remote-stdio-gdbserver.exp to make it
inherit from gdbserver-base.exp. Since then, this board (which is
actually remote) uses the overrides with local file operations. As a
result, files are never actually copied to the target.
I think we can simply remove the overrides from gdbserver-base.exp.
Because all boards should be properly considered local or remote by
DejaGNU, it should by default use the right method for transferring
files.
gdb/testsuite/ChangeLog:
PR gdb/22841
* boards/gdbserver-base.exp (${board}_file, ${board}_download,
${board}_upload): Remove.
"clr reg" is an alias of "xor reg, reg". We can encode "clr reg64" as
"xor reg32, reg32".
gas/
* config/tc-i386.c (optimize_encoding): Also encode "clr reg64"
as "xor reg32, reg32".
* testsuite/gas/i386/x86-64-optimize-1.s: Add "clr reg64" tests.
* testsuite/gas/i386/x86-64-optimize-1.d: Updated.
opcodes/
* i386-opc.tbl: Add Optimize to clr.
* i386-tbl.h: Regenerated.
When resolving a relocation against IFUNC symbol in a SHT_NOTE section
without SHF_ALLOC, we treat it as relocation against FUNC symbol since
it needs the address of IFUNC symbol, not the address returned by IFUNC
function.
bfd/
PR ld/22929
* elf32-i386.c (elf_i386_relocate_section): Treat relocation
against IFUNC symbol in SHT_NOTE section without SHF_ALLOC as
relocation against FUNC symbol.
* elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
ld/
PR ld/22929
* testsuite/ld-i386/i386.exp: Run PR ld/22929 test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr22929.d: New file.
* testsuite/ld-i386/pr22929.s: Likewise.
* testsuite/ld-x86-64/pr22929.d: Likewise.
* testsuite/ld-x86-64/pr22929.s: Likewise.
The differences between some of the register and memory forms of the
same insn often don't really require the templates to be separate. For
example, Disp8MemShift is simply irrelevant to register forms. Fold
these as far as possible, and also fold register-only forms. Further
folding is possible, but needs other prereq work done first.
A note regarding EVEXDYN: This is intended to be used only when no other
properties of the template would make is_evex_encoding() return true. In
all "normal" cases I think it is preferable to omit this indicator, to
keep the table half way readable.
Their memory forms were bogusly using VexLWP instead of VexNDD. Adjust
VexNDD handling to cope with these, allowing their register and memory
forms to be folded.
The differences between some of the register and memory forms of the
same insn often don't really require the templates to be separate. For
example, Disp8MemShift is simply irrelevant to register forms. Fold them
as far as possible. Further folding is possible, but needs other prereq
work done first.
They aren't really useful (anymore?): The conflicting operand size check
isn't applicable to any insn validly using respective memory operand
sizes (and if they're used wrongly, another error would result), and the
logic in process_suffix() can be easily changed to work without them.
While re-structuring conditionals in process_suffix() also drop the
CMPXCHG8B special case in favor of a NoRex64 attribute in the opcode
table.
Some BMI/BMI2 insns allow their middle operands to be a memory one. In
such a case, matching register types between operands 0 and 1 as well as
1 and 2 won't help - operands 0 and 2 also need to be checked.
Jim Wilson
Tom Tromey
Yao Qi
Alan Modra
H.J. Lu
GDB Administrator
Nick Clifton
Andrew Burgess
Yao Qi
Eli Zaretskii
Simon Marchi
Simon Marchi
Alan Hayward
Jan Beulich