gas/
* config/tc-aarch64.c (enum aarch64_abi_type): New enumeration tag.
(AARCH64_ABI_LP64, AARCH64_ABI_ILP32): New enumerators.
(aarch64_abi): New variable.
(ilp32_p): Change to be a macro.
(aarch64_opts): Remove the support for option -milp32 and -mlp64.
(struct aarch64_option_abi_value_table): New struct.
(aarch64_abis): New table.
(aarch64_parse_abi): New function.
(aarch64_long_opts): Add entry for -mabi=.
* doc/as.texinfo (Target AArch64 options): Document -mabi.
* doc/c-aarch64.texi: Likewise.
gas/testsuite/
* gas/aarch64/ilp32-basic.d (#as): Update to use -mabi=ilp32
RX610.
* config/rx-parse.y: (rx_check_float_support): Add function to
check floating point operation support for target RX100 and
RX200.
* config/tc-rx.c: Add CPU options RX100, RX200, RX600, and RX610.
* doc/c-rx.texi: Add -mcpu option to recognize macros for RX100,
RX200, RX600, and RX610
* config/tc-mips.c (mips_prefer_vec_regno, mips_parse_register):
New functions, split out from...
(reg_lookup): ...here. Remove itbl support.
(reglist_lookup): Delete.
(mips_operand_token_type): New enum.
(mips_operand_token): New structure.
(mips_operand_tokens): New variable.
(mips_add_token, mips_parse_base_start, mips_parse_argument_token)
(mips_parse_arguments): New functions.
(md_begin): Initialize mips_operand_tokens.
(mips_arg_info): Add a token field. Remove optional_reg field.
(match_char, match_expression): New functions.
(match_const_int): Use match_expression. Remove "s" argument
and return a boolean result. Remove O_register handling.
(match_regno, match_reg, match_reg_range): New functions.
(match_int_operand, match_mapped_int_operand, match_msb_operand)
(match_reg_operand, match_reg_pair_operand, match_perf_reg_operand)
(match_addiusp_operand, match_clo_clz_dest_operand)
(match_lwm_swm_list_operand, match_entry_exit_operand)
(match_save_restore_list_operand, match_mdmx_imm_reg_operand)
(match_tied_reg_operand): Remove "s" argument and return a boolean
result. Match tokens rather than text. Update calls to
match_const_int. Rely on match_regno to call check_regno.
(match_pcrel_operand, match_pc_operand): Replace "s" argument with
"arg" argument. Return a boolean result.
(parse_float_constant): Replace with...
(match_float_constant): ...this new function.
(match_operand): Remove "s" argument and return a boolean result.
Update calls to subfunctions.
(mips_ip, mips16_ip): Call mips_parse_arguments. Use match routines
rather than string-parsing routines. Update handling of optional
registers for token scheme.
gas/testsuite/
* gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: Add some more cases.
* gas/mips/micromips-ill.s, gas/mips/micromips-ill.l: New test.
* gas/mips/mips.exp: Run it.
* config/tc-mips.c (mips32_to_16_reg_map): Delete.
(match_entry_exit_operand): New function.
(match_save_restore_list_operand): Likewise.
(match_operand): Use them.
(check_absolute_expr): Delete.
(mips16_ip): Rewrite main parsing loop to use mips_operands.
* config/tc-mips.c: Enable functions commented out in previous patch.
(SKIP_SPACE_TABS): Move further up file.
(mips32_to_micromips_reg_b_map, mips32_to_micromips_reg_c_map)
(mips32_to_micromips_reg_d_map, mips32_to_micromips_reg_e_map)
(ips32_to_micromips_reg_f_map, mips32_to_micromips_reg_g_map)
(mips32_to_micromips_reg_l_map, mips32_to_micromips_reg_m_map)
(mips32_to_micromips_reg_q_map, mips32_to_micromips_reg_n_map)
(micromips_imm_b_map, micromips_imm_c_map): Delete.
(mips_lookup_reg_pair): Delete.
(macro): Use report_bad_range and report_bad_field.
(mips_immed, expr_const_in_range): Delete.
(mips_ip): Rewrite main parsing loop to use new functions.
gas/testsuite/
* gas/mips/at-2.l: Remove duplicated $at warnings.
* gas/mips/ext-ill.l, gas/mips/lui-1.l, gas/mips/mips32r2-ill.l,
gas/mips/mips32r2-ill-nofp.l, gas/mips/mips32r2-ill-fp64.l,
gas/mips/mips64r2-ill.l, gas/mips/octeon-ill.l: Update error
messages. Expect negative numbers to be printed as such,
rather than as large unsigned positive numbers.
* config/tc-mips.c (mips_oddfpreg_ok): Move further up file.
Change return type to bfd_boolean.
(report_bad_range, report_bad_field): New functions.
(mips_arg_info): New structure.
(match_const_int, convert_reg_type, check_regno, match_int_operand)
(match_mapped_int_operand, match_msb_operand, match_reg_operand)
(match_reg_pair_operand, match_pcrel_operand, match_perf_reg_operand)
(match_addiusp_operand, match_clo_clz_dest_operand)
(match_lwm_swm_list_operand, match_mdmx_imm_reg_operand)
(match_pc_operand, match_tied_reg_operand, match_operand)
(check_completed_insn): New functions, commented out for now.
* config/tc-mips.c (insn_insert_operand): New function.
(macro_build, mips16_macro_build): Put null character check
in the for loop and convert continues to breaks. Use operand
structures to handle constant operands.
* mips.h (mips_operand_type, mips_reg_operand_type): New enums.
(mips_operand, mips_int_operand, mips_mapped_int_operand)
(mips_msb_operand, mips_reg_operand, mips_reg_pair_operand)
(mips_pcrel_operand): New structures.
(mips_insert_operand, mips_extract_operand, mips_signed_operand)
(mips_decode_int_operand, mips_decode_pcrel_operand): New functions.
(decode_mips_operand, decode_micromips_operand): Declare.
opcodes/
* mips-formats.h: New file.
* mips-opc.c: Include mips-formats.h.
(reg_0_map): New static array.
(decode_mips_operand): New function.
* micromips-opc.c: Remove <stdio.h> include. Include mips-formats.h.
(reg_0_map, reg_28_map, reg_29_map, reg_31_map, reg_m16_map)
(reg_mn_map, reg_q_map, reg_h_map1, reg_h_map2, int_b_map)
(int_c_map): New static arrays.
(decode_micromips_operand): New function.
* mips-dis.c (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map)
(micromips_to_32_reg_d_map, micromips_to_32_reg_e_map)
(micromips_to_32_reg_f_map, micromips_to_32_reg_g_map)
(micromips_to_32_reg_h_map1, micromips_to_32_reg_h_map2)
(micromips_to_32_reg_l_map, micromips_to_32_reg_m_map)
(micromips_to_32_reg_n_map, micromips_to_32_reg_q_map)
(micromips_imm_b_map, micromips_imm_c_map): Delete.
(print_reg): New function.
(mips_print_arg_state): New structure.
(init_print_arg_state, print_insn_arg): New functions.
(print_insn_args): Change interface and use mips_operand structures.
Delete GET_OP_S. Move GET_OP definition to...
(print_insn_mips): ...here. Update the call to print_insn_args.
(print_insn_micromips): Use print_insn_args.
gas/
* config/tc-mips.c (validate_mips_insn): Move further up file.
Add insn_bits and decode_operand arguments. Use the mips_operand
fields to work out which bits an operand occupies. Detect double
definitions.
(validate_micromips_insn): Move further up file. Call into
validate_mips_insn.
* config/tc-mips.c (imm_expr, imm2_expr, offset_expr): Tweak commentary.
(imm_reloc): Delete.
(md_assemble): Remove imm_reloc handling.
(mips_ip): Update commentary. Use offset_expr and offset_reloc
rather than imm_expr and imm_reloc for 'i', 'j' and 'u'.
Use a temporary array rather than imm_reloc when parsing
constant expressions. Remove imm_reloc initialization.
(mips16_ip): Update commentary. Use offset_expr and offset_reloc
for the relaxable field. Use a relax_char variable to track the
type of this field. Remove imm_reloc initialization.
* mips.h (EF_MIPS_NAN2008): New macro.
bfd/
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Handle
EF_MIPS_NAN2008.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
binutils/
* readelf.c (get_machine_flags): Handle EF_MIPS_NAN2008.
gas/
* config/tc-mips.c (mips_flag_nan2008): New variable.
(options): Add OPTION_NAN enum value.
(md_longopts): Handle it.
(md_parse_option): Likewise.
(s_nan): New function.
(mips_elf_final_processing): Handle EF_MIPS_NAN2008.
(md_show_usage): Add -mnan.
* doc/as.texinfo (Overview): Add -mnan.
* doc/c-mips.texi (MIPS Opts): Document -mnan.
(MIPS NaN Encodings): New node. Document .nan directive.
(MIPS-Dependent): List the new node.
gas/testsuite/
* gas/mips/nan-2008-1.d: New test.
* gas/mips/nan-2008-2.d: New test.
* gas/mips/nan-2008-3.d: New test.
* gas/mips/nan-2008-4.d: New test.
* gas/mips/nan-legacy-1.d: New test.
* gas/mips/nan-legacy-2.d: New test.
* gas/mips/nan-legacy-3.d: New test.
* gas/mips/nan-legacy-4.d: New test.
* gas/mips/nan-legacy-5.d: New test.
* gas/mips/nan-error-1.l: New list test.
* gas/mips/nan-error-2.l: New list test.
* gas/mips/nan-2008-override.s: New test source.
* gas/mips/nan-2008.s: New test source.
* gas/mips/nan-legacy-override.s: New test source.
* gas/mips/nan-legacy.s: New test source.
* gas/mips/nan-error-1.s: New test source.
* gas/mips/nan-error-2.s: New test source.
* gas/mips/mips.exp: Run the new tests.
ld/testsuite/
* ld-mips-elf/nan-2008.d: New test.
* ld-mips-elf/nan-legacy.d: New test.
* ld-mips-elf/nan-mixed-1.d: New test.
* ld-mips-elf/nan-mixed-2.d: New test.
* ld-mips-elf/nan-2008.s: New test source.
* ld-mips-elf/nan-legacy.s: New test source.
2013-07-09 Tristan Gingold <gingold@adacore.com>
* configure.com: Add new defines to match changes in configure.
gas/
2013-07-09 Tristan Gingold <gingold@adacore.com>
* configure.com: Define HAVE_SYS_TYPES_H and HAVE_UNISTD_H
* config/tc-mips.c (mips_ip): Unconditionally parse an expression
for 'A' and assume that the constant has been elided if the result
is an O_register.
gas/testsuite/
* gas/mips/la.s, gas/mips/la.d, gas/mips/la-svr4pic.d,
gas/mips/la-xgot.d: Add tests for bracketed addresses.
* mips.h (M_ACLR_OB, M_ASET_OB, M_CACHE_OB, M_CACHEE_OB, M_L_DOB)
(M_LB_A, M_LBE_OB, M_LBU_A, M_LBUE_OB, M_LD_A, M_LD_OB, M_LDC2_OB)
(M_LDL_OB, M_LDM_OB, M_LDP_OB, M_LDR_OB, M_LH_A, M_LHE_OB, M_LHU_A)
(M_LHUE_OB, M_LL_OB, M_LLD_OB, M_LLE_OB, M_LS_A, M_LW_A, M_LWE_OB)
(M_LWC0_A, M_LWC1_A, M_LWC2_A, M_LWC2_OB, M_LWC3_A, M_LWL_A, M_LWL_OB)
(M_LWLE_OB, M_LWM_OB, M_LWP_OB, M_LWR_A, M_LWR_OB, M_LWRE_OB, M_LWU_OB)
(M_PREF_OB, M_PREFE_OB, M_S_DOB, M_SAA_OB, M_SAAD_OB, M_SC_OB)
(M_SCD_OB, M_SCE_OB, M_SD_A, M_SD_OB, M_SDC2_OB, M_SDL_OB, M_SDM_OB)
(M_SDP_OB, M_SDR_OB, M_SB_A, M_SBE_OB, M_SH_A, M_SHE_OB, M_SW_A)
(M_SWE_OB, M_SWC0_A, M_SWC1_A, M_SWC2_A, M_SWC2_OB, M_SWC3_A, M_SWL_A)
(M_SWL_OB, M_SWLE_OB, M_SWM_OB, M_SWP_OB, M_SWR_A, M_SWR_OB, M_SWRE_OB)
(M_ULD, M_ULH, M_ULHU, M_ULW, M_USH, M_USW, M_USD): Delete.
(M_ULD_A, M_ULH_A, M_ULHU_A, M_ULW_A, M_USH_A, M_USW_A, M_USD_A):
Rename to...
(M_ULD_AB, M_ULH_AB, M_ULHU_AB, M_ULW_AB, M_USH_AB, M_USW_AB)
(M_USD_AB): ...these.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove o(b) macros. Move LD
and SD A(B) macros up.
* micromips-opc.c (micromips_opcodes): Likewise.
gas/
* config/tc-mips.c (gprel16_reloc_p): New function.
(macro_read_relocs): Assume BFD_RELOC_LO16 if all relocs are
BFD_RELOC_UNUSED.
(offset_high_part, small_offset_p): New functions.
(nacro): Use them. Remove *_OB and *_DOB cases. For single-
register load and store macros, handle the 16-bit offset case first.
If a 16-bit offset is not suitable for the instruction we're
generating, load it into the temporary register using
ADDRESS_ADDI_INSN. Make the M_LI_DD code fall through into the
M_L_DAB code once the address has been constructed. For double load
and store macros, again handle the 16-bit offset case first.
If the second register cannot be accessed from the same high
part as the first, load it into AT using ADDRESS_ADDI_INSN.
Fix the handling of LD in cases where the first register is the
same as the base. Also handle the case where the offset is
not 16 bits and the second register cannot be accessed from the
same high part as the first. For unaligned loads and stores,
fuse the offbits == 12 and old "ab" handling. Apply this handling
whenever the second offset needs a different high part from the first.
Construct the offset using ADDRESS_ADDI_INSN where possible,
for offbits == 16 as well as offbits == 12. Use offset_reloc
when constructing the individual loads and stores.
(mips_ip): Set up imm_expr, imm2_expr, offset_expr, imm_reloc
and offset_reloc before matching against a particular opcode.
Handle elided 'A' constants. Allow 'A' constants to use
relocation operators.
gas/testsuite/
* gas/mips/ldstla-32.d: Avoid "lui at,0x0" sequences for
truncated constants.
* gas/mips/ldstla-32-shared.d: Likewise.
* gas/mips/mcu.d: Use ADDIU in preference to LI+ADDU when adding
16-bit constants to the base.
* gas/mips/micromips@mcu.d: Likewise.
* gas/mips/micromips@cache.d: Likewise.
* gas/mips/micromips@pref.d: Likewise.
* gas/mips/micromips.d, gas/mips/micromips-insn32.d,
gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d: Likewise.
Allow the full 16-bit offset range to be used for SB, LB and LBU in
USH and ULH sequences. Fix the expected output for LD and SD when
the two LW and SW offsets need different high parts.
* gas/mips/eva.s: Test PREFE with relocation operators.
* gas/mips/eva.d: Use ADDIU in preference to LI+ADDU for 16-bit
constants. Update after eva.s change.
* gas/mips/micromips@eva.d: Likewise.
* gas/mips/ld-reloc.s, gas/mips/ld-reloc.d, gas/mips/l_d-reloc.s,
gas/mips/l_d-reloc.d, gas/mips/ulw-reloc.s, gas/mips/ulw-reloc.d,
gas/mips/micromips@ulw-reloc.d, gas/mips/ulh-reloc.s,
gas/mips/ulh-reloc.d: New tests.
* gas/mips/mips.exp: Run them.
* mips.h: Remove documentation of "[" and "]". Update documentation
of "k" and the MDMX formats.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400
MDMX-like instructions.
* mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when
printing "Q" operands for INSN_5400 instructions.
gas/
* config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling.
(mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions.
Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions.
gas/testsuite/
* gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: New test.
* gas/mips/mips.exp: Run it.
* mips.h: Update documentation of "+s" and "+S".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "+s" for "cins32" and
"+S" for "cins".
* mips-dis.c (print_mips_arg): Update "+s" and "+S" comments.
Combine cases.
gas/
* config/tc-mips.c (mips_ip): Preserve the real bit number for "+p".
Require the msb to be <= 31 for "+s". Check that the size is <= 31
for both "+s" and "+S".
* mips.h: Document "+i".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for
"jalx".
* mips16-opc.c (mips16_opcodes): Likewise.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_mips16_insn_arg)
(print_insn_mips16): Handle "+i".
(print_insn_micromips): Likewise. Conditionally preserve the
ISA bit for "a" but not for "+i".
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn):
(mips_ip, mips16_ip): Handle "+i".
* mips.h: Remove documentation of "+D" and "+T".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
and "+T" handling. Check for a "0" suffix when deciding whether to
use coprocessor 0 names. In that case, also check for ",H" selectors.
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
(mips_ip): Remove "+D" and "+T" handling.
gas/testsuite/
* gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names
for LWC0 and SWC0.
opcodes/
* s390-opc.c (J12_12, J24_24): New macros.
(INSTR_MII_UPI): Rename to INSTR_MII_UPP.
(MASK_MII_UPI): Rename to MASK_MII_UPP.
* s390-opc.txt: Rename MII_UPI to MII_UPP for bprp instruction.
include/elf/
* s390.h: Add new relocs R_390_PC12DBL, R_390_PLT12DBL,
R_390_PC24DBL, and R_390_PLT24DBL.
gas/testsuite/
* gas/s390/zarch-zEC12.s: Change bprp second operand and add
variants requiring relocations.
* gas/s390/zarch-zEC12.d: Likewise.
gas/
* config/tc-s390.c (md_gather_operands, md_apply_fix): Support new
relocs.
bfd/
* elf32-s390.c: Add new relocation definitions R_390_PC12DBL,
R_390_PLT12DBL, R_390_PC24DBL, and R_390_PLT24DBL.
(elf_s390_reloc_type_lookup, elf_s390_check_relocs)
(elf_s390_gc_sweep_hook, elf_s390_relocate_section): Support new
relocations.
* elf64-s390.c: See elf32-s390.c
* bfd-in2.h: Add new relocs to enum bfd_reloc_code_real.
* libbfd.h: Add new reloc strings.
* elf64-ppc.c (ppc64_elf_relocate_section): Set "relocation" for
.TOC. after relocatable check.
gas/
* config/tc-ppc.c (ppc_elf_adjust_symtab): Don't make .TOC. weak.
and gas.
bfd/
* Makefile.am (BFD64_BACKENDS): Add elf32-aarch64.lo.
(BUILD_CFILES): Add elf32-aarch64.c.
(elf32-aarch64.c): New rule for generating from elfnn-aarch64.c.
* Makefile.in: Re-generated.
* archures.c (bfd_mach_aarch64_ilp32): New define.
* bfd-in.h (bfd_elf32_aarch64_init_maps): New declaration.
(bfd_elf32_aarch64_set_options): Ditto.
(elf32_aarch64_setup_section_lists): Ditto.
(elf32_aarch64_next_input_section): Ditto.
(elf32_aarch64_size_stubs): Ditto.
(elf32_aarch64_build_stubs): Ditto.
* bfd-in2.h: Re-generated.
* config.bfd (aarch64-*-elf): Add bfd_elf32_littleaarch64_vec
and bfd_elf32_bigaarch64_vec.
(aarch64-*-linux*): Likewise.
(aarch64_be-*-elf): Likewise.
(aarch64_be-*-linux*): Likewise.
* configure.in (bfd_elf32_bigaarch64_vec)
(bfd_elf32_littleaarch64_vec): New.
* configure: Re-generated.
* cpu-aarch64.c (compatible): Don't allow mixing ilp32 objects with
lp64 ones.
(bfd_aarch64_arch_ilp32): New.
(bfd_aarch64_arch): Link to bfd_aarch64_arch_ilp32.
* elfnn-aarch64.c (ARCH_SIZE): New define.
(AARCH64_R, AARCH64_R_STR, LOG_FILE_ALIGN): New defines.
(GOT_ENTRY_SIZE): Re-define as (ARCH_SIZE / 8).
(elf64_aarch64_*): Rename to elfNN_aarch64_*.
(ELF64_R_*): Rename to ELFNN_R_*.
Plus other paramaterization.
* targets.c (bfd_elf32_bigaarch64_vec, bfd_elf32_littleaarch64_vec):
New declarations.
(_bfd_target_vector): Add bfd_elf32_bigaarch64_vec and
bfd_elf32_littleaarch64_vec.
gas/
* config/tc-aarch64.c (ilp32_p): New static variable.
(elf64_aarch64_target_format): Return the target according to the
value of 'ilp32_p'.
(md_begin): Determine 'mach' according to the value of 'ilp32_p'.
(aarch64_opts): Add support for options '-milp32' and '-mlp64'.
(aarch64_dwarf2_addr_size): New function.
* config/tc-aarch64.h (aarch64_dwarf2_addr_size): New declaration.
(DWARF2_ADDR_SIZE): New define.
ld/
* Makefile.am (ALL_64_EMULATION_SOURCES): Add eaarch64elf32.c.
(eaarch64elf32.c): New dependency and rule.
* Makefile.in: Re-generated.
* configure.tgt (aarch64-*-elf): Add aarch64elf32.
(aarch64_be-*-elf, aarch64_be-*-linux*, aarch64-*-linux*): Likewise.
* emulparams/aarch64elf32.sh: New file.
* mips.h: Fix comment for "1": it is now STYPE rather than SHAMT.
Use "source" rather than "destination" for microMIPS "G".
gas/
* config/tc-mips.c (validate_mips_insn): Use STYPE rather than SHAMT.
* config/tc-arm.c (parse_reg_list): Use skip_past_char for '}',
so it skips whitespace before it.
(s_arm_unwind_save_mmxwr, s_arm_unwind_save_mmxwcg): Likewise.
gas/testsuite/
* gas/arm/macro-vld1.s: Add a case with whitespace before '}'.
* gas/arm/macro-vld1.d: Update.
H.J. Lu
Richard Sandiford
Tristan Gingold
Andreas Krebbel
Kyrylo Tkachov
Yufeng Zhang
Nick Clifton
Maciej W. Rozycki
Marcus Shawcroft
Alan Modra
Roland McGrath