A number of places in elf32-nios.c created dynamic sections but didn't
set the hash table dynobj. That meant we could have duplicate dynamic
sections connected to a number of bfds, so size_dynamic_sections
didn't properly discard or allocate contents.
Also, the entire set of dynamic sections was created in check_relocs
on seeing GOT relocs, when only .got related sections are needed,
probably done to hide segfaults later in finish_dynamic_sections.
The patch fixes these issues and makes the assembler emit errors when
nios2 lacks the necessary pc-relative relocs for subtraction
expressions, rather than silently generating bad code.
eg. ld-elf/merge. I've also tidied uses of elf32_nios2_hash_table and
elf_hash_table.
bfd/
PR 20995
* elf32-nios2.c (nios2_elf32_relocate_section): Use htab
rather than elf32_nios2_hash_table or elf_hash_table.
(create_got_section): Likewise.
(nios2_elf32_finish_dynamic_symbol): Likewise.
(nios2_elf32_adjust_dynamic_symbol): Likewise.
(nios2_elf32_size_dynamic_sections): Likewise.
(nios2_elf32_check_relocs): Delete dynobj, sgot, and srelgot
vars. Use htab equivalents directly instead. Don't create
all dynamic sections on needing just the GOT. Use a goto
rather than a fall-through with reloc test. Ensure
htab->dynobj is set when making dynamic sreloc section.
(nios2_elf32_finish_dynamic_sections): Delete dynobj, use htab
equivalent directly instead. Don't segfault on looking for
.dynamic when dynamic sections have not been created. Don't
segfault on .got.plt being discarded.
(nios2_elf32_size_dynamic_sections): Delete plt and got vars.
Don't set "relocs" on .rela.plt. Do handle .sbss. Delete
fixme and another not so relevant comment.
(nios2_elf_add_symbol_hook): Delete dynobj var. If not
already set, set hash table dynobj on creating .sbss.
gas/
* config/tc-nios2.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
ld/
* testsuite/ld-elf/merge.d: xfail for nios.
This came up because I was looking at ld/tmpdir/addpcis.o and noticed
the odd addends on REL16DX_HA. They ought to both be -4. The error
crept in due REL16DX_HA howto being pc-relative (as indeed it should
be), and code at gas/write.c:1001 after this comment
/* Make it pc-relative. If the back-end code has not
selected a pc-relative reloc, cancel the adjustment
we do later on all pc-relative relocs. */
*not* cancelling the pc-relative adjustment. So I've made a dummy
non-relative split reloc so that the generic code handles this, rather
than attempting to add hacks later in md_apply_fix which would not be
very robust. Having the new internal reloc also makes it easy to
support
addpcis rx,sym@ha
as an equivalent to
addpcis rx,(sym-0f)@ha
0:
The patch also fixes overflow checking, which must test whether the
addi will overflow too since @l relocs don't have any overflow check.
Lastly, since I was poking at md_apply_fix, I arranged to have the
generic gas/write.c code emit errors for subtraction expressions where
we lack reloc support.
include/
* elf/ppc64.h (R_PPC64_16DX_HA): New. Expand fake reloc comment.
* elf/ppc.h (R_PPC_16DX_HA): Likewise.
bfd/
* reloc.c (BFD_RELOC_PPC_16DX_HA): New.
* elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_16DX_HA>): New howto.
(ppc64_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc64_elf_ha_reloc): Correct overflow test on REL16DX_HA.
(ppc64_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_16DX_HA>): New howto.
(ppc_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc_elf_check_relocs): Handle R_PPC_16DX_HA to pacify gcc.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (md_assemble): Use BFD_RELOC_PPC_16DX_HA for addpcis.
(md_apply_fix): Remove fx_subsy check. Move code converting to
pcrel reloc earlier and handle BFD_RELOC_PPC_16DX_HA. Remove code
emiiting errors on seeing fx_pcrel set on unexpected relocs, as
that is done now by the generic code via..
* config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): ..this. Define.
(TC_VALIDATE_FIX_SUB): Define.
ld/
* testsuite/ld-powerpc/addpcis.d: Define ext1 and ext2 at
limits of addpcis range.
Interpret the `jalr $0, $25' instruction encoding with an R_MIPS_JALR
relocation attached as an alias to `jr $25' and convert the jump to an
equivalent branch where possible, consequently covering the MIPSr6
architecture for the purpose of this optimization too.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Also handle the
`jalr $0, $25' instruction encoding.
gas/
* testsuite/gas/mips/jalr4.s: Add `jalr $0, $25' instructions.
* testsuite/gas/mips/jalr4.d: Adjust accordingly. Remove MIPSr6
encoding patterns.
* testsuite/gas/mips/jalr4-n64.d: Likewise.
* testsuite/gas/mips/mipsr6@jalr4.d: New test.
* testsuite/gas/mips/mipsr6@jalr4-n32.d: New test.
* testsuite/gas/mips/mipsr6@jalr4-n64.d: New test.
ld/
* testsuite/ld-mips-elf/jalr4.dd: Adjust for `jalr $0, $25'
instructions.
* testsuite/ld-mips-elf/jalr4-r6.dd: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
HPUX has a different .comm syntax, and anything in the first column
is a label.
gas/
* testsuite/gas/elf/strtab.s: Don't put directives on first
column or continuation with labels not in first column.
ld/
* testsuite/ld-elf/elf.exp: Xfail pr20995 tests on hppa64-hpux.
Set up HPUX defsym. Run pr14170 tests and build symbol3 objects,
defining HPUX where necessary. Define HPUX for implib tests.
* testsuite/ld-elf/comm-data4.d: Run for hpux.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/linkoncerdiff.d: Likewise.
* testsuite/ld-elf/comm-data4.s: Add alternate .comm when HPUX.
* testsuite/ld-elf/comm-data5.s: Likewise.
* testsuite/ld-elf/endsym.s: Likewise.
* testsuite/ld-elf/pr14170c.s: Likewise.
* testsuite/ld-elf/symbol3.s: Likewise.
* testsuite/ld-elf/implib.s: Likewise. Don't start directives
in first column.
* testsuite/ld-elf/linkoncerdiff2.s: Don't use numeric labels.
* testsuite/ld-elf/warn3.d: Run for hpux.
* testsuite/ld-scripts/rgn-at10.d: Xfail for hpux.
* testsuite/ld-scripts/rgn-at11.d: Likewise.
* testsuite/ld-scripts/size-2.d: Remove xfail for hpux.
Fix a commit 74e1a04b97 ("More fixes for reading corrupt ELF files.")
`readelf --version-info' regression that caused "Version definition past
end of section" to be always printed at the end, even with good section
data.
For example with the `mips-linux' target we get:
$ cat ver_def.s
.data
.globl new_foo
.type new_foo, %object
new_foo:
.symver new_foo, foo@@ver_foo
$ cat ver_def.ver
{ global: *foo*; local: *; };
$ as -o ver_def.o ver_def.s
$ ld -e 0 --export-dynamic --version-script=ver_def.ver -o ver_def ver_def.o
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr)
000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
Version definition past end of section
$
The cause is the `if (idx + ent.vd_next <= idx)' condition introduced to
ensure forward progress, which however always triggers for good version
definition section data as the last entry will have its `vd_next' value
set to 0.
Adjust the condition then, to say `if (idx + ent.vd_next < idx)' instead
and to ensure forward progress limit the number of entries processed to
the size of the version definition section, removing the problematic
message from output quoted above, while ensuring the original PR 17531
test case is still handled gracefully.
Add a suitable test case so that we have `readelf --version-info'
coverage; due to the lack of infrastructure needed to run the linker in
the `binutils' test suite and limited justification to implement it add
a new `readelf.exp' script to the `ld' test suite instead, intended to
gather any `readelf' test cases that require the linker to be run. If
ever we decide to have linker infrastructure added to the `binutils'
test suite, then the script can be moved between the test suites.
binutils/
* readelf.c (process_version_sections) <SHT_GNU_verdef>: Limit
the number of entries processed by the section size. Don't
break out of the loop if `ent.vd_next' is 0.
ld/
* testsuite/ld-elf/ver_def.d: New test.
* testsuite/ld-elf/ver_def.ld: New test linker script.
* testsuite/ld-elf/ver_def.ver: New test version script.
* testsuite/ld-elf/ver_def.s: New test source.
* testsuite/ld-elf/readelf.exp: New test script.
Remove separate original NewABI JALR relocation handling, introduced
with commit d06471104a ("relax jalr $t9 [R_MIPS_JALR symbol] to bal
symbol"), <https://sourceware.org/ml/binutils/2003-03/msg00394.html>,
and only used by LD with the `--relax' option specified, and rely solely
on `mips_elf_perform_relocation' code, which has been introduced with
commit 1367d393bb ("On the RM9000 convert jal to bal if in range"),
<https://www.sourceware.org/ml/binutils/2004-12/msg00088.html> and since
made more complete, across all the three ABIs.
Also remove the `--relax' option, now irrelevant, from the tests added
with the former commit.
bfd/
* elfxx-mips.h (_bfd_mips_relax_section): Remove prototype.
* elfxx-mips.c (_bfd_mips_relax_section): Remove function.
* elf64-mips.c (bfd_elf64_bfd_relax_section): Remove macro.
* elfn32-mips.c (bfd_elf32_bfd_relax_section): Likewise.
ld/
* testsuite/ld-mips-elf/relax-jalr-n32.d: Remove `--relax'
option.
* testsuite/ld-mips-elf/relax-jalr-n32-shared.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n64.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n64-shared.d: Likewise.
Discard R_MIPS_JALR and R_MICROMIPS_JALR relocations associated with
jumps that cannot be converted to an equivalent branch right away in
`mips_elf_calculate_relocation' rather than letting them through to
`mips_elf_perform_relocation'. This includes cross-mode jumps which
need to flip the ISA bit or jumps to a misaligned location that cannot
be encoded with a branch, in addition to preemptible symbol references
already handled.
Cross-mode jumps are actually already rejected as the conversion is made
in `mips_elf_perform_relocation', so in this case this change only saves
some processing. Jumps to a misaligned location are however converted,
with bits causing misalignment lost, making resulting code functionally
different even if the lone effect is avoiding an address error exception
with an instruction fetch at the jump destination requested.
Add test cases suitable, also including GAS verification to confirm that
the JALR relocations explicitly requested have indeed been output in the
intermediate objects used.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation) <R_MIPS_JALR>
<R_MICROMIPS_JALR>: Discard relocation if `cross_mode_jump_p'
or misaligned.
gas/
* testsuite/gas/mips/jalr4.d: New test.
* testsuite/gas/mips/jalr4-n32.d: New test.
* testsuite/gas/mips/jalr4-n64.d: New test.
* testsuite/gas/mips/jalr4.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/jalr4.dd: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
PR 20744
bfd/
* elf32-ppc.c (ppc_elf_howto_raw): Correct dst_mask on all VLE
16D relocations.
(ppc_elf_vle_split16): Correct field mask and shift for 16D relocs.
(ppc_elf_relocate_section): Correct calculation for VLE SDAREL
relocs.
ld/
* testsuite/ld-powerpc/vle-reloc-2.s: Use r6 for last insn of
each group.
* testsuite/ld-powerpc/vle-reloc-2.d: Update for above change
and sdarel reloc fix.
Complement commit b531344c34 ("PR ld/20828: Reorder the symbol sweep
stage of section GC") and commit 81ff47b3a5 ("PR ld/20828: Fix linker
script symbols wrongly forced local with section GC") and move symbol
version processing ahead of the symbol sweep stage of section GC, all in
`bfd_elf_size_dynamic_sections', so that version symbols created stay in
the global scope and are not output as local symbols to the dynamic
symbol table in the presence of corresponding symbol definitions pulled
from a DSO involved in a link.
Consolidate the whole of symbol version processing into a single block
from all parts scattered across the function and rearranging the local
variables used as necessary, however leaving the setting of dynamic
entries associated with the DT_VERDEF, DT_VERDEFNUM, DT_VERNEED and
DT_VERNEEDNUM tags and the SEC_EXCLUDE flag for unused `.gnu.version'
section in the original places.
With the rearrangement of code blocks `Elf_Internal_Verneed *t' would
shadow the previous definition of `struct bfd_elf_version_tree *t', so
rename the former variable to `vn'.
bfd/
PR ld/20828
* elflink.c (bfd_elf_size_dynamic_sections): Move symbol version
processing ahead of the call to `elf_gc_sweep_symbol'.
ld/
PR ld/20828
* testsuite/ld-elf/pr20828-d.sd: New test.
* testsuite/ld-elf/pr20828-e.sd: New test.
* testsuite/ld-elf/pr20828-v.od: New test.
* testsuite/ld-elf/pr20828-v.ver: New test version script.
* testsuite/ld-elf/pr20828-v.ld: New test linker script.
* testsuite/ld-elf/pr20828.ld: Add `.gnu.version' and
`.gnu.version_d'.
* testsuite/ld-elf/shared.exp: Run the new tests.
When looking up file and line information (used from the linker to
report error messages) if no symbol is passed in, then use the symbol
list to look for a matching symbol.
If a matching symbol is found then use this to look up the file / line
information.
This should improve errors when looking up file / line information for
data sections. Hopefully we should find a matching data symbol, which
should, in turn (we hope) match a DW_TAG_variable in the DWARF, this
should allow us to give accurate file / line errors for data symbols.
As the hope is to find a matching DW_TAG_variable in the DWARF then we
ignore section symbols, and prefer global symbols to locals.
bfd/ChangeLog:
* dwarf2.c (_bfd_dwarf2_find_nearest_line): Perform symbol lookup
before trying to fine matching file and line information.
ld/ChangeLog:
* testsuite/ld-elf/shared.exp: Update expected results.
* testsuite/ld-elf/dwarf2.err: Likewise
When parsing DWARF data in order to report file/line type error messages
we perform section placement to make section addresses unique within
relocatable object files.
Currently, if we reuse previously loaded (and cached) dwarf data then we
neglect to perform section placement, the result is that the section
addresses will not be unique, and we might, incorrectly associate an
address with the wrong debug information, and so report an incorrect
file and line number.
Further we neglect to check that that bfd for which we are looking up
debug information is actually the bfd for which the previous debug
information was loaded, it is possible that we will reuse previously
loaded debug information for a different bfd.
And finally, due to following of gnu_debuglink links in one bfd to
another, the process of checking that the cached debug information is
valid requires us to track the original bfd in the cached debug
information. The original debug information here is either the bfd that
we're interested in, not the bfd we finally load the debug information
from.
bfd/ChangeLog:
* dwarf2.c (struct dwarf2_debug): Add orig_bfd member.
(_bfd_dwarf2_slurp_debug_info): If stashed debug information does
not match current bfd, then reload debug information. Record bfd
we're loading debug info for in the stash. If we have debug
informatin in the cache then perform section placement before
returning.
ld/ChangeLog:
* testsuite/ld-elf/dwarf.exp (build_tests): Add new tests.
* testsuite/ld-elf/dwarf2.err: New file.
* testsuite/ld-elf/dwarf2a.c: New file.
* testsuite/ld-elf/dwarf2b.c: New file.
* testsuite/ld-elf/dwarf3.c: New file.
* testsuite/ld-elf/dwarf3.err: New file.
This commit adds new actions to the run_cc_link_tests mechanism in the
linker testsuite.
Previously this procedure could take a parameter containing a regular
expression that would be matched against warnings from the linker.
After this commit the warnings parameter is removed, instead, the
actions list can contain the actions 'warning', 'error',
'warning_output', or 'error_output'. The action names are chosen to
match the actions already present in the run_dump_test procedure.
These new actions allow for the current warning checking, but also allow
for checking of errors using a regular expression. More interestingly,
the *_output actions allow for the warning/error patterns to be placed
in a separate file.
The small number of tests that make use of the warning parameter have
been updated to the new mechanism. Later commits will make use of the
new features added in this commit.
ld/ChangeLog:
* testsuite/lib/ld-lib.exp (run_cc_link_tests): Add warning,
error, warning_output, and error_output actions. Remove separate
warnings parameter.
* testsuite/ld-elf/shared.exp (build_tests): Updated to use
'warning' action.
* testsuite/ld-plugin/lto.exp (lto_link_tests): Likewise.
ld/testsuite/ld-elf/check-ptr-eq.c fails for hppa, since function
pointers may point at plabels. It isn't valid to cast two function
pointers to void* and then compare the void pointers.
* testsuite/ld-elf/check-ptr-eq.c (check_ptr_eq): Change params
from void pointers to function pointers.
* testsuite/ld-elf/pr18718.c: Update to suit.
* testsuite/ld-elf/pr18720a.c: Update to suit.
I misunderstood the hppa alias problem. File offsets of segments need
to be such that no page is mapped twice with different permissions.
(Which still seems to me like something the kernel could fix, but
anyhow, this is not so difficult to achieve in ld.)
PR 21000
bfd/
* elf-bfd.h (struct elf_backend_data): Add no_page_alias.
* elfxx-target.h (elf_backend_no_page_alias): Define.
(elfNN_bed): Init new field.
* elf.c (assign_file_positions_for_load_sections): If no_page_alias
ensure PT_LOAD segment starts on a new page.
* elf32-hppa.c (elf_backend_no_page_alias): Define.
ld/
* testsuite/ld-elf/loadaddr1.d: Adjust for hppa file offsets.
* testsuite/ld-elf/loadaddr2.d: Likewise.
* testsuite/ld-elf/loadaddr3a.d: Likewise.
* testsuite/ld-scripts/rgn-at5.d: Likewise.
"lea foo@GOT, %reg" is OK in PIC since it only loads the GOT offset
into register, which can be used later with a GOT base register to
get the value in the GOT entry.
bfd/
PR ld/21168
* elf32-i386.c (elf_i386_relocate_section): Allow
"lea foo@GOT, %reg" in PIC.
ld/
PR ld/21168
* testsuite/ld-i386/i386.exp: Run pr21168.
* testsuite/ld-i386/pr21168a.c: New file.
* testsuite/ld-i386/pr21168b.S: Likewise.
bfd/
PR ld/20244
* elf32-i386.c (elf_i386_relocate_section): Properly get IFUNC
symbol name when reporting R_386_GOT32/R_386_GOT32X relocation
error against local IFUNC symbol without a base register for
PIC.
ld/
PR ld/20244
* testsuite/ld-i386/i386.exp: Run pr20244-4a, pr20244-4b and
pr20244-4c.
* testsuite/ld-i386/pr20244-4.s: New file.
* testsuite/ld-i386/pr20244-4a.d: Likewise.
* testsuite/ld-i386/pr20244-4b.d: Likewise.
* testsuite/ld-i386/pr20244-4c.d: Likewise.
Remove an inconsistency in linker error message processing causing that
it depends on the ability to infer the name of the originating source
file whether or not the name of the offending function is repeated by
clever formatters for each issue reported within the function.
Taking the `ld/testsuite/ld-powerpc/tocopt7.s' test case source as an
example and the `powerpc-linux' target we have:
$ as -gdwarf2 -o tocopt.o -a64 tocopt.s
$ ld -o tocopt -melf64ppc tocopt.o
tocopt.o: In function `_start':
tocopt.s:35:(.text+0x14): toc optimization is not supported for 0x3fa00000 instruction.
tocopt.s:49:(.text+0x34): toc optimization is not supported for 0x3fa00000 instruction.
$
vs:
$ as -o tocopt.o -a64 tocopt.s
$ ld -o tocopt -melf64ppc tocopt.o
tocopt.o: In function `_start':
(.text+0x14): toc optimization is not supported for 0x3fa00000 instruction.
tocopt.o: In function `_start':
(.text+0x34): toc optimization is not supported for 0x3fa00000 instruction.
$
Similarly with the `mips-linux' target and this source:
$ cat jal-global-multi-overflow.s
.text
.set noreorder
.space 0x2000
.align 4
.globl foo
.ent foo
foo:
jal bar
nor $0, $0
jal bar
nor $0, $0
.end foo
.space 0x1ff0
.align 4
.globl bar
.ent bar
bar:
jal foo
nor $0, $0
jal foo
nor $0, $0
.end bar
$ as -o jal-global-multi-overflow.o jal-global-multi-overflow.s
$ ld -Ttext 0x1fffd000 -e foo -o jal-global-multi-overflow jal-global-multi-overflow.o
jal-global-multi-overflow.o: In function `foo':
(.text+0x2000): relocation truncated to fit: R_MIPS_26 against `bar'
jal-global-multi-overflow.o: In function `foo':
(.text+0x2008): relocation truncated to fit: R_MIPS_26 against `bar'
jal-global-multi-overflow.o: In function `bar':
(.text+0x4000): relocation truncated to fit: R_MIPS_26 against `foo'
jal-global-multi-overflow.o: In function `bar':
(.text+0x4008): relocation truncated to fit: R_MIPS_26 against `foo'
$
Not only this is inconsistent, but it causes output clutter as well with
redundant information.
The cause for this is a check in `vfinfo' the intent of which is to
print the function heading whenever (among others) the name of the
source file has changed, which however does not take into account a
situation where the name couldn't have been established both now and
previously.
Adjust the check then for this situation, yielding:
$ as -o tocopt.o -a64 tocopt.s
$ ld -o tocopt -melf64ppc tocopt.o
tocopt.o: In function `_start':
(.text+0x14): toc optimization is not supported for 0x3fa00000 instruction.
(.text+0x34): toc optimization is not supported for 0x3fa00000 instruction.
$
and:
$ as -o jal-global-multi-overflow.o jal-global-multi-overflow.s
$ ld -Ttext 0x1fffd000 -e foo -o jal-global-multi-overflow jal-global-multi-overflow.o
jal-global-multi-overflow.o: In function `foo':
(.text+0x2000): relocation truncated to fit: R_MIPS_26 against `bar'
(.text+0x2008): relocation truncated to fit: R_MIPS_26 against `bar'
jal-global-multi-overflow.o: In function `bar':
(.text+0x4000): relocation truncated to fit: R_MIPS_26 against `foo'
(.text+0x4008): relocation truncated to fit: R_MIPS_26 against `foo'
$
respectively instead. Adjust the test suite accordingly.
ld/
* ldmisc.c (vfinfo): Don't print the function name again either
if no source file name has been found both now and previously.
* testsuite/ld-cris/tls-err-20x.d: Adjust accordingly.
* testsuite/ld-mips-elf/mode-change-error-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-2.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-r6-2.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-ignore-2.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-ignore-mips16.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-branch-ignore-micromips.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jump.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jump-mips16.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jump-micromips.d: Likewise.
* testsuite/ld-mips-elf/unaligned-lwpc-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-ldpc-1.d: Likewise.
* testsuite/ld-powerpc/tocopt.out: Likewise.
* testsuite/ld-powerpc/tocopt7.out: Likewise.
Remove static NULL initializers, moving the respective variables from
data to BSS and saving some storage space.
ld/
* ldmisc.c (vfinfo) <'H'>: Remove static NULL initializers.
"_gp" could conflict with ABI-complient code. While it's probably OK
because MIPS uses this name, we figured it'd be good to clean this up
before a release with RISC-V in it.
ld/ChangeLog:
2017-02-13 Palmer Dabbelt <palmer@dabbelt.com>
* emulparams/elf32lriscv-defs.sh (SDATA_START_SYMBOLS): Change
_gp to __global_pointer$.
bfd/ChangeLog:
2017-02-13 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (riscv_global_pointer_value): Change _gp to
__global_pointer$.
If we are configuring for an arc/linux target, and --with-cpu=nps400 is
used at configure time then change the default linker emulation to the
nps specific version. All of the alternative linker emulations are
still available using the -mNAME option for ld.
ld/ChangeLog:
* configure.tgt (arc*-*-linux*): Change the default linker
emulation based on --with-cpu selection.
* NEWS: Mention new configuration option.
Match `$check_ld(source)' against "regex" rather than "regexp" in
reporting, correcting test framework diagnostics, e.g.:
tmpdir/undefined.o: In function `foo':
(.text+0x0): undefined reference to `bar'
failed with: <tmpdir/undefined.o: In function `foo':
(.text+0x0): undefined reference to `bar'>, no expected output
tmpdir/undefined.o: In function `foo':
(.text+0x0): undefined reference to `bar'
PASS: MIPS undefined reference
(current) vs:
tmpdir/undefined.o: In function `foo':
(.text+0x0): undefined reference to `bar'
failed with: <tmpdir/undefined.o: In function `foo':
(.text+0x0): undefined reference to `bar'>, expected: <\A[^\n]*\.o: In function `foo':\n\(\.text\+0x0\): undefined reference to `bar'\Z>
tmpdir/undefined.o: In function `foo':
(.text+0x0): undefined reference to `bar'
PASS: MIPS undefined reference
(corrected). No functional change.
ld/
* ld/testsuite/lib/ld-lib.exp (run_dump_test): Fix a typo,
s/regexp/regex/.
ld/
* testsuite/lib/ld-lib.exp (check_libdl_available): New function.
* testsuite/ld-elf/shared.exp (run_tests): Split tests which require
dlopen support into "dlopen_run_tests". These tests include dl1*main
and dl6*main.
(dlopen_run_tests): New and only run it when check_libdl_available
returns true. XFAIL on *-*-netbsdelf*.
Fix commit 171191bac5 ("Add support for STT_IFUNC"),
<https://sourceware.org/ml/binutils/2008-12/msg00052.html>, commit
e04d7088af ("PR ld/14088: Always display addend as signed hex
number"), <https://sourceware.org/ml/binutils/2012-05/msg00123.html> and
commit 343dbc36ff ("Print addend as signed in objdump"),
<https://sourceware.org/ml/binutils/2012-05/msg00163.html> regressions:
FAIL: VxWorks executable test 1 (dynamic)
FAIL: ld-mips-elf/vxworks-forced-local-1
seen with `mips-vxworks' and `mipsel-vxworks' targets and adjust dump
patterns according to changes made to the presentation of relocation
addends in `readelf -r' and `objdump -r' output.
ld/
* testsuite/ld-mips-elf/vxworks-forced-local-1.d: Correct the
presentation of relocation addends.
* testsuite/ld-mips-elf/vxworks1-lib.rd: Likewise.
* testsuite/ld-mips-elf/vxworks1.dd: Likewise.
* testsuite/ld-mips-elf/vxworks1.rd: Likewise.
Correct a commit ec9ab52c32 ("gas: consistently emit diagnostics for
non-zero data emission to .bss/.struct"),
<https://sourceware.org/ml/binutils/2015-12/msg00073.html> regression:
.../ld/testsuite/ld-mips-elf/tls-multi-got-1-1.s: Assembler messages:
.../ld/testsuite/ld-mips-elf/tls-multi-got-1-1.s:39: Error: attempt to store non-zero value in section `.tbss'
ERROR: -EB -march=mips1 -32 -KPIC .../ld/testsuite/ld-mips-elf/tls-multi-got-1-1.s: assembly failed
UNRESOLVED: Shared library with multiple GOTs and TLS
in MIPS target testing and move `tlsvar_ld' to `.tdata' section, in line
with the remaining local dynamic definitions introduced with the set of
tests added with commit f4e584bd00 ("TLS support for MIPS"),
<https://sourceware.org/ml/binutils/2005-02/msg00607.html>.
ld/
* testsuite/ld-mips-elf/tls-multi-got-1-1.s: Place `tlsvar_ld'
in `.tdata' section.
* testsuite/ld-mips-elf/tls-multi-got-1.got: Adjust accordingly.
* testsuite/ld-mips-elf/tls-multi-got-1.r: Likewise.
Complement commit 9d862524f6 ("MIPS: Verify the ISA mode and alignment
of branch and jump targets") and add GAS and LD options to control the
checks for invalid branches between ISA modes introduced there, to help
with some handwritten code lacking `.insn' annotation for labels used as
branch targets and code produced by older versions of GCC which suffers
from the issue with branches to code that has been optimized away,
addressed with GCC commit 242424 ("MIPS/GCC: Mark trailing labels with
`.insn'"), <https://gcc.gnu.org/ml/gcc-patches/2016-11/msg01061.html>.
bfd/
* elfxx-mips.h (_bfd_mips_elf_insn32): Rename prototype to...
(_bfd_mips_elf_linker_flags): ... this. Add another parameter.
* elfxx-mips.c (mips_elf_link_hash_table): Add
`ignore_branch_isa' member.
(mips_elf_perform_relocation): Do not treat an ISA mode mismatch
in branch relocation calculation as an error if
`ignore_branch_isa' has been set.
(_bfd_mips_elf_insn32): Rename to...
(_bfd_mips_elf_linker_flags): ... this. Rename the `on'
parameter to `insn32' and add an `ignore_branch_isa' parameter.
Handle the new parameter.
gas/
* config/tc-mips.c (mips_ignore_branch_isa): New variable.
(options): Add OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA enum values.
(md_longopts): Add "mignore-branch-isa" and
"mno-ignore-branch-isa" options.
(md_parse_option): Handle OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA.
(fix_bad_cross_mode_branch_p): Return FALSE if
`mips_ignore_branch_isa' has been set.
(md_show_usage): Add `-mignore-branch-isa' and
`-mno-ignore-branch-isa'.
* doc/as.texinfo (Target MIPS options): Add
`-mignore-branch-isa' and `-mno-ignore-branch-isa' options.
(-mignore-branch-isa, -mno-ignore-branch-isa): New options.
* doc/c-mips.texi (MIPS Options): Add `-mignore-branch-isa' and
`-mno-ignore-branch-isa' options.
* testsuite/gas/mips/branch-local-ignore-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-3.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-3.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-3.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* emultempl/mipself.em (ignore_branch_isa): New variable.
(mips_create_output_section_statements): Rename
`_bfd_mips_elf_insn32' called to `_bfd_mips_elf_linker_flags',
add `ignore_branch_isa' argument.
(PARSE_AND_LIST_PROLOGUE): Add OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA enum values.
(PARSE_AND_LIST_LONGOPTS): Add "ignore-branch-isa" and
"no-ignore-branch-isa" options.
(PARSE_AND_LIST_OPTIONS): Add `--ignore-branch-isa' and
`--no-ignore-branch-isa'.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA.
* ld.texinfo (Options specific to MIPS targets): Add
`--ignore-branch-isa' and `--no-ignore-branch-isa' options.
(ld and the MIPS family): Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-mips16: New
test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-micromips: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
PR 20343
ld * ld.texinfo (Options): Extend documentation of the --plugin
option. Include a description of where the plugins should be
located.
binutils* doc/binutils.texi (ar): Extend documentation of the --plugin
option. Include a description of where the plugins should be
located.
(nm): Likewise.
bfd/
* config.bfd (powerpcle-*-rtems*): Do not mark as removed.
(arm-*-rtems*): Move to (arm*-*-eabi*).
(i[3-7]86-*-rtems*): Move to (i[3-7]86-*-elf*).
(m68-*-rtems*): Move to (m68*-*-elf*).
ld/
* configure.tgt (arm-*-rtems*): Move to (arm*-*-eabi*).
(bfin-*-rtems*): Move to (bfin*-*-elf*).
(i[3-7]86-*-rtems*): Move to (i[3-7]86*-*-elf*).
(m68*-*-rtems*): Move to (m68*-*-elf*).
(mips*-*-rtems*): Move to (mips*-*-elf*).
(or1k*-*-rtems*): Move to (or1k*-*-elf*).
(powerpc*-*-rtems*): Move to (powerpc*-*-elf*).
(sparc*-*-rtems*): Move to (sparc*-*-elf*).
(sparc64*-*-rtems*): Move to (sparc64*-*-elf*).
Correct a bug in Solaris 2 linker emulation code triggered by a test
introduced with commit 81ff47b3a5 ("PR ld/20828: Fix linker script
symbols wrongly forced local with section GC") and only create implicit
version nodes if versioning is actually introduced with a version script
(or VERSION command) rather than only global vs local symbol visibility
selected, fixing an:
ld: anonymous version tag cannot be combined with other version tags
linker error produced whenever a version script (or VERSION command) is
used that does not assign symbol versions, such as:
{ global: foo; bar; local: *; };
and consequently removing a:
FAIL: PR ld/20828 dynamic symbols with section GC (version script)
test suite failure with the `x86_64-solaris2' target.
ld/
* emultempl/solaris2.em (elf_solaris2_before_allocation): Do not
add implicit version nodes if an anonymous version tag is being
used.
This patch fixes a number of issues with powerpc dynamic relocations.
1) Both ppc and ppc64 were emitting more dynamic symbols and
relocations than necessary, due to not supporting static linker
resolution of tls_index entries for __tls_get_addr_opt. This meant
that any @got@tlsgd or @got@tlsld reloc needed to make their symbols
dynamic and generate dptmod and dtprel relocs for the dynamic linker.
That would have been passable, but what happened was that practically
all @got relocations resulted in their symbols being made dynamic and
dynamic relocations emitted against the GOT entries. (Mostly visible
on ppc32 executables since ppc64 gcc really only uses @got style
relocs for TLS.)
2) The PowerOpen syntax was not supported with __tls_get_addr_opt.
DTPMOD/DTPREL relocs on tls_index TOC entries did not use the trick of
forcing dynamic symbols and relocations so those entries always
resulted in the full __tls_get_addr processing. gcc doesn't use the
PowerOpen syntax for TLS, and normally such code would be optimized to
TLS IE or LE so the impact of missing this support was minimal.
3) In an executable, relocations against GNU indirect functions always
used the value of their PLT stub. While this is correct, it is
better in some cases to use a dynamic relocation. An extra dynamic
relocation can mean that calls via function pointers need not bounce
through the PLT stub at runtime.
The patch also tidies the PLT handling code in ppc32
allocate_dynrelocs. Allocating PLT entries after other dynamic relocs
allows the PLT loop to omit special handling for undefined weak
symbols, and that in turn allows the loop to be simplified.
bfd/
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Merge two cases
where dynamic relocs are preferable. Allow ifunc too.
(ensure_undefweak_dynamic): New function.
(allocate_dynrelocs): Use it here. Move plt handling last and
don't make symbols dynamic, simplifying loop. Only make undef
weak symbols with GOT entries dynamic. Correct condition
for GOT relocs. Handle dynamic relocs on ifuncs. Correct
comments. Remove goto.
(ppc_elf_relocate_section): Correct test for using dynamic
symbol on GOT relocs. Rearrange test for emitting GOT relocs
to suit. Set up explicit tls_index entries and implicit GOT
tls_index entries resolvable at link time for
__tls_get_addr_opt. Simplify test to clear mem for prelink.
* elf64-ppc.c (allocate_got): Correct condition for GOT relocs.
(ensure_undefweak_dynamic): New function.
(allocate_dynrelocs): Use it here. Only make undef weak symbols
with GOT entries dynamic. Remove unnecessary test of
WILL_CALL_FINISH_DYNAMIC_SYMBOL in PLT handling.
(ppc64_elf_relocate_section): Correct test for using dynamic
symbol on GOT relocs. Rearrange test for emitting GOT relocs
to suit. Set up explicit tls_index entries and implicit GOT
tls_index entries resolvable at link time for __tls_get_addr_opt.
Simplify expression to clear mem for prelink.
ld/
* testsuite/ld-powerpc/tlsexe.r: Update for fewer dynamic relocs
and symbols.
* testsuite/ld-powerpc/tlsexe.d: Likewise.
* testsuite/ld-powerpc/tlsexe.g: Likewise.
bfd * elfnn-aarch64.c: Fix relaxations for ILP32 mode.
ld * testsuite/ld-aarch64/aarch64-elf.exp: Run new tests.
* testsuite/ld-aarch64/tls-desc-ie-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-all-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-gd-le-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-gdesc-le-2-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-gdesc-le-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-ie-le-2-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-ie-le-3-ilp32.d: New test.
* testsuite/ld-aarch64/tls-relax-ie-le-ilp32.d: New test.
* testsuite/ld-aarch64/tls-tiny-desc-ie-ilp32.d: New test.
* testsuite/ld-aarch64/tls-tiny-desc-le-ilp32.d: New test.
* testsuite/ld-aarch64/tls-tiny-gd-ie-ilp32.d: New test.
* testsuite/ld-aarch64/tls-tiny-gd-le-ilp32.d: New test.
Complement commit 81ff47b3a5 ("PR ld/20828: Fix linker script symbols
wrongly forced local with section GC") and add `.plt' to the list of
output sections created, fixing:
FAIL: PR ld/20828 dynamic symbols with section GC (auxiliary shared library)
FAIL: PR ld/20828 dynamic symbols with section GC (plain)
FAIL: PR ld/20828 dynamic symbols with section GC (version script)
failures with `riscv32-elf', `riscv32-linux', `riscv64-elf' and
`riscv64-linux' targets caused by LD crashing in the absence of such a
section.
ld/
PR ld/20828
* testsuite/ld-elf/pr20828.ld: Add `.plt'.
Complement commit 81ff47b3a5 ("PR ld/20828: Fix linker script symbols
wrongly forced local with section GC") and remove the leading underscore
from `_fdata' and `_edata' symbols used in tests, fixing a:
FAIL: PR ld/20828 dynamic symbols with section GC (version script)
failure with targets such as: `bfin-elf', `bfin-uclinux', `metag-elf',
`metag-linux' `mn10300-elf', `sh-elf', `sh64-elf', and possibly other
ones, that have `_' set (with `elf_symbol_leading_char') as the leading
character for symbols. As from commit 93252b1cf4 ("bfd/ld: handle ABI
prefixes in version scripts") these targets strip the leading underscore
before applying version script rules, because the (default) syntax for
symbol names is that of the C language rather than their low-level
symbol table encoding.
ld/
PR ld/20828
* testsuite/ld-elf/pr20828.ld: Rename `_fdata' and `_edata' to
`fdata' and `edata' respectively.
* testsuite/ld-elf/pr20828.ver: Adjust accordingly.
* testsuite/ld-elf/pr20828-a.sd: Likewise.
* testsuite/ld-elf/pr20828-b.sd: Likewise.
* testsuite/ld-elf/pr20828-c.sd: Likewise.
Complement commit 81ff47b3a5 ("PR ld/20828: Fix linker script symbols
wrongly forced local with section GC") and make tests check for the
presence of global `_fdata' and `_edata' symbols separately, removing
any dependency on symbol table ordering for tests to succeed and
removing:
FAIL: PR ld/20828 dynamic symbols with section GC (auxiliary shared library)
FAIL: PR ld/20828 dynamic symbols with section GC (plain)
failures with the `x86_64-solaris2' target, which has additional
intervening entries:
Symbol table '.dynsym' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 1 _fdata
2: 0000000000000000 0 OBJECT GLOBAL DEFAULT 1 _DYNAMIC
3: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS _PROCEDURE_LINKAGE_TABLE_
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 1 _edata
5: 00000000000001b8 0 OBJECT GLOBAL DEFAULT 4 _GLOBAL_OFFSET_TABLE_
Rename dump pattern files accordingly for consistency.
ld/
PR ld/20828
* testsuite/ld-elf/pr20828-1.sd: Remove test.
* testsuite/ld-elf/pr20828-a.sd: New test.
* testsuite/ld-elf/pr20828-2a.sd: Rename test to...
* testsuite/ld-elf/pr20828-b.sd: ... this.
* testsuite/ld-elf/pr20828-2b.sd: Rename test to...
* testsuite/ld-elf/pr20828-c.sd: ... this.
* testsuite/ld-elf/shared.exp: Adjust accordingly.
ld/
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Append
board_cflags as gcc is used as linker driver.
* testsuite/ld-unique/unique.exp: Likewise
bfd/
* elfnn-aarch64.c (elf_aarch64_hash_symbol): New function.
(elf_backend_hash_symbol): Define.
ld/
* testsuite/ld-aarch64/aarch64-elf.exp (aarch64elflinktests): New tests.
* testsuite/ld-aarch64/func-in-so.s: New test source file.
* testsuite/ld-aarch64/func-sym-hash-opt.s: Likewise.
* testsuite/ld-aarch64/func-sym-hash-opt.d: New expected test result.
When displaying the section headers table using objdump (-h), the column
containing the section header name is currently fixed at 13 characters.
A section name that is longer than 13 characters will overflow the
column causing the table to become miss-aligned.
In this commit I change the behaviour so that _in wide mode_ (-w -h) the
section name column is dynamically resized to fit the longest section
name we plan to display. In wide mode the column still retains a
minimum width of 13 characters.
In non-wide more the behaviour is completely unchanged.
While I was changing the dump_headers function I have unified the two
printf lines that handled the different address widths into a single
printf, the address width is now passed into printf using the '*' field
width format character.
binutils/ChangeLog:
* objdump.c (dump_section_header): Extract max section name length
from data parameter, use this when formatting output.
(find_longest_section_name): New function.
(dump_headers): Calculate longest section name when in wide mode,
reformat to unify printing of header line.
ld/ChangeLog:
* testsuite/ld-elf/eh-frame-hdr.d: Update expected results.
Complement commit 9acc85a62e ("Use dynrelro for symbols in relro
sections too").
ld/
PR ld/20995
* testsuite/ld-elf/elf.exp: Set GAS flags correctly for the
`mips*-*-*' target and `pr20995' and `pr20995-2' tests.
Fix a generic ELF linker regression introduced with a chain of changes
made to unused input section garbage collection:
- commit 1a766c6843 ("Also hide symbols without PLT nor GOT
references."),
<https://sourceware.org/ml/binutils/2011-09/msg00076.html>,
- commit 1d5316ab67 ("PR ld/13177: garbage collector retains zombie
references to external libraries"),
<https://sourceware.org/ml/binutils/2011-10/msg00161.html>,
- commit 6673f753c0 ("Fix PR 12772, garbage collection of dynamic
syms"), <https://sourceware.org/ml/binutils/2011-12/msg00077.html>,
causing the garbage collection of unused symbols present in a DSO
involved in a link to make identically named symbols ordinarily defined
(i.e. not hidden or PROVIDEd) by a linker script local, even though the
latter symbols are supposed to be global as if no DSO defined them as
well.
This is because linker script assignments are processed very late as
`lang_process' proceeds, down in the call to `ldemul_before_allocation',
which is made after the call to `lang_gc_sections' to do input section
garbage collecting. Consequently if unused, then any such DSO-defined
symbol has already been garbage-collected and internally marked local.
It would ordinarily be removed from dynamic symbol table output, however
a linker script assignment correctly replaces its original definition
with the new one and enters it into the dynamic symbol table produced as
it is supposed to be exported. The original local marking is however
retained making the symbol local in the dynamic symbol table and
therefore not available externally. This also causes a sorting problem
with the MIPS target, which does not expect non-section local dynamic
symbols to be output and produces an invalid binary.
Fix the problem then, by removing the `forced_local' marking for the
offending case and add suitable test cases. First to verify that unused
symbols ordinarily defined with linker script assignments remain
exported in the context of input section garbage collection whether or
not a DSO defining identically named symbols is present in the link.
Second that a linker version script still correctly retains or removes
such symbols as requested.
bfd/
PR ld/20828
* elflink.c (bfd_elf_record_link_assignment): Clear any
`forced_local' marking for DSO symbols that are not being
provided.
ld/
PR ld/20828
* testsuite/ld-elf/pr20828-1.sd: New test.
* testsuite/ld-elf/pr20828-2a.sd: New test.
* testsuite/ld-elf/pr20828-2b.sd: New test.
* testsuite/ld-elf/pr20828.ld: New test linker script.
* testsuite/ld-elf/pr20828.ver: New test version script.
* testsuite/ld-elf/pr20828.s: New test source.
* testsuite/ld-elf/shared.exp: Run the new test.
Correct a regression from commit 8614eeee67 ("Traditional MIPS
patches"), <https://sourceware.org/ml/binutils/2000-07/msg00018.html>,
which caused symbols in linkonce or what is these days known as comdat
sections to be treated as external for the purpose of PIC relocation
generation even if their binding remains STB_LOCAL. This in turn
disabled GOT16/LO16 relocation pairing with references to such symbols,
as no complementing LO16 relocation is expected for external GOT16
references in the o32 ABI, which ultimately leads to link errors, e.g.:
ld: comdat-reloc.o: Can't find matching LO16 reloc against `foo' for R_MIPS_GOT16 at 0x24 in section `.text.bar[bar]'
as with the LD test case included with this change.
Revert the special case for symbols in comdat sections then, making code
actually match `adjust_reloc_syms' as indicated in its explanatory
comment, and adjust calling code accordingly. Also bring back the
corresponding description of what now is `s_is_linkonce', lost with
commit 5f0fe04bc5 ("Improved MIPS16/MIPS32 code intermixing for
gas."), <https://www.sourceware.org/ml/binutils/2006-07/msg00039.html>.
gas/
PR gas/20649
* config/tc-mips.c (pic_need_relax): Don't check for linkonce
symbols, remove the `segtype' parameter.
(mips_frob_file, md_estimate_size_before_relax): Adjust
accordingly.
(s_is_linkonce): Add an explanatory comment.
* testsuite/gas/mips/comdat-reloc.d: New test.
* testsuite/gas/mips/comdat-reloc.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
ld/
PR gas/20649
* testsuite/ld-mips-elf/mips-elf.exp: Add PIC comdat GOT16/LO16
relocation pairing link test.
Also generate unwind info for the .plt.bnd section. Sine it is the same
as unwind info for the .plt.got section, we use unwind info for the
.plt.got section to cover the the .plt.bnd section.
bfd/
PR ld/21038
* elf64-x86-64.c (elf_x86_64_link_hash_table): Add
plt_bnd_eh_frame.
(elf_x86_64_check_relocs): Create .eh_frame section for the
.plt.bnd section.
(elf_x86_64_size_dynamic_sections): Allocate and initialize
.eh_frame section for the .plt.bnd section.
(elf_x86_64_finish_dynamic_sections): Adjust .eh_frame section
for the .plt.bnd section.
ld/
PR ld/21038
* testsuite/ld-x86-64/pr21038b.d: Updated.
* testsuite/ld-x86-64/pr21038c.d: New file.
* testsuite/ld-x86-64/pr21038c.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr21038c.
bfd * config.bfd: Add entries for i686-redox and x86_64-redox.
gas * configure.tgt: Add entry for i386-redox.
ld * configure.tgt: Add entries for x86-redox and x86_64-redox.
This patch places .plt.got section after .plt section for x32.
* emulparams/elf32_x86_64.sh (TINY_READONLY_SECTION): New.
* testsuite/ld-x86-64/pr20830.d: Renamed to ...
* testsuite/ld-x86-64/pr20830a.d: This. Updated.
* testsuite/ld-x86-64/pr20830b.d: New file.
* testsuite/ld-x86-64/x86-64.exp: Rename pr20830 to pr20830a.
Run pr20830b.
When there are both PLT and GOT references to the same function symbol,
linker combines GOTPLT and GOT slots into a single GOT slot and create
an entry in .plt.got section for PLT access via the GOT slot. This
patch adds unwind info for .plt.got section.
bfd/
PR ld/20830
* elf32-i386.c (elf_i386_eh_frame_plt_got): New.
(PLT_GOT_FDE_LENGTH): Likewise.
(elf_i386_plt_layout): Add eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_i386_plt): Updated.
(elf_i386_link_hash_table): Add plt_got_eh_frame.
(elf_i386_check_relocs): Create .eh_frame section for .plt.got.
(elf_i386_size_dynamic_sections): Allocate and initialize
.eh_frame section for .plt.got.
(elf_i386_finish_dynamic_sections): Adjust .eh_frame section for
.plt.got.
(elf_i386_nacl_plt): Add FIXME for eh_frame_plt_got and
eh_frame_plt_got_size.
* elf64-x86-64.c (elf_x86_64_eh_frame_plt_got): New.
(PLT_GOT_FDE_LENGTH): Likewise.
(elf_x86_64_backend_data): Add eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_x86_64_arch_bed): Updated.
(elf_x86_64_bnd_arch_bed): Add FIXME for eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_x86_64_nacl_arch_bed): Likewise.
(elf_x86_64_link_hash_table): Add plt_got_eh_frame.
(elf_x86_64_check_relocs): Create .eh_frame section for .plt.got.
(elf_x86_64_size_dynamic_sections): Allocate and initialize
.eh_frame section for .plt.got.
(elf_x86_64_finish_dynamic_sections): Adjust .eh_frame section
for .plt.got.
ld/
PR ld/20830
* testsuite/ld-i386/i386.exp: Run pr20830.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr20830.d: New file.
* testsuite/ld-i386/pr20830.s: Likewise.
* testsuite/ld-x86-64/pr20830.d: Likewise.
* testsuite/ld-x86-64/pr20830.s: Likewise.
Since linker tests were changed to use $CC, instead of $LD, we need
to pass -Wl,-R,tmpdir and -Wl,--as-needed to $CC.
* testsuite/ld-i386/i386.exp: Pass -Wl,-R,tmpdir to GCC driver.
* testsuite/ld-i386/tls.exp: Likewise.
The arc700 nps variant uses some specific named sections to
facilitate its CMEM based instructions, which operate on memory
regions fixed at specific addresses.
This commit adds the arclinux_nps emulation, which is based on the
arclinux emulation. The new emulation uses the OTHER_SECTIONS
variable in the emulation parameters script to provide symbols
mapping to various locations in the CMEM space on nps.
The accompanying test ensures that all symbols are provided at the
correct address in the linker script.
ld/ChangeLog:
* Makefile.am: Add earclinux_nps.c target and add to
ALL_EMULATION_SOURCES.
* Makefile.in: Likewise, regenerated.
* configure.tgt: Add arclinux_nps as an extra emulation for
arc*-*-elf* and arc*-*-linux*.
* emulparams/arc-nps.sh: New file.
* emulparams/arclinux_nps.sh: New file.
* testsuite/ld-arc/arclinux-nps.d,
* testsuite/ld-arc/arclinux-nps.s: New test.
This was added so compressed loads could have smaller offsets for
accessing the data section, but the result was that writable sections
ended up in INITIAL_READONLY_SECTIONS. This is a bad idea. The fix is
to just remove this micro-optimization.
Thanks to Alan Morda for finding the problem!
ld/ChangeLog
2017-01-09 Palmer Dabbelt <palmer@dabbelt.com>
Kito Cheng <kito.cheng@gmail.com>
* emulparams/elf32lriscv-defs.sh (INITIAL_READONLY_SECTIONS):
Removed.
(SDATA_START_SYMBOLS): Likewise.
I noticed that PRU LD is broken when BFD is configured
with --enable-targets=all. This patch fixes it, and takes the
opportunity to clean the epruelf.c dependencies.
* Makefile.am (ALL_EMULATION_SOURCES): Add epruelf.c.
(epruelf.c): Remove unneeded dependencies.
* Makefile.in: Regenerate
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
Needed for cross-builds without --sysroot, where USE_LIBPATH isn't
set. See elf32.em after_open. Perhap ld ought to look at -rpath in
this case?
* testsuite/ld-elf/shared.exp: Add -rpath-link and -no-as-needed
to various tests.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-elfvers/vers.exp (vers19): Fix -rpath-link option.
Removing the [isnative] check requires that we test for a C compiler.
* testsuite/ld-elf/elf.exp: Check that $CC exists before C tests.
* testsuite/ld-pie/pie.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
Many of the ld tests are not run for cross builds, in some cases
because the test needs to run a newly linked executable, and in others
simply because it was easier to write the test for native only. Even
when a test needs to run, it's good to compile and link to exercise
the linker. So that's what this patch does. I've also rid us of
the old ld_link procedure with all the HOSTING_CRT0 etc. setup. It's
much simpler to just link with $CC.
This does mean that a cross build with cross-compiler installed but
no cross C-library will give lots of failures. If that turns out to
be too annoying, I guess we can write a tcl procedure to detect it and
not run all the extra tests.
* Makefile.am (bootstrap): Delete rule.
(ld-partial, ld1, ld1-full, ld2, ld3): Likewise.
(HOSTING_CRT0, HOSTING_SCRT0): Don't define.
(HOSTING_LIBS, HOSTING_SLIBS, HOSTING_EMU): Likewise.
* configure.ac (HOSTING_CRT0, HOSTING_SCRT0): Don't define.
(HOSTING_LIBS, HOSTING_SLIBS): Likewise.
* configure.host (HOSTING_CRT0, HOSTING_LIBS): Don't define.
* Makefile.in: Regenerate.
* configure: Regenerate.
* testsuite/config/default.exp (get_link_files): Delete.
(HOSTING_CRT0, HOSTING_SCRT0, HOSTING_LIBS, HOSTING_SLIBS): Don't
define.
(ld_simple_link): Delete.
* testsuite/lib/ld-lib.exp (default_ld_link): Delete
(default_ld_simple_link): Rename to default_ld_link.
(ld_simple_link_defsyms): Rename to ld_link_defsyms.
(run_ld_link_tests): Use ld_link, not ld_simple_link.
(run_cc_link_tests): Likewise.
(run_ld_link_exec_tests): Use $CC or $CXX to link, not $ld.
Don't run exe when not native, and return unsupported.
* testsuite/ld-bootstrap/bootstrap.exp: Create gccld1 etc. dirs.
Link ld1 etc. using $CC.
* testsuite/ld-cdtest/cdtest.exp: Link cdtest using $CC.
* testsuite/ld-checks/checks.exp: Use ld_link, not ld_simple_link.
* testsuite/ld-cygwin/exe-export.exp: Likewise.
* testsuite/ld-elf/binutils.exp: Likewise.
* testsuite/ld-elf/eh-group.exp: Likewise.
* testsuite/ld-elf/exclude.exp: Likewise.
* testsuite/ld-elf/frame.exp: Likewise.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* testsuite/ld-elf/tls_common.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-fastcall/fastcall.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-ifunc/binutils.exp: Likewise.
* testsuite/ld-mep/mep.exp: Likewise.
* testsuite/ld-mips-elf/mips-elf-flags.exp: Likewise.
* testsuite/ld-mn10300/mn10300.exp: Likewise.
* testsuite/ld-nios2/nios2.exp: Likewise.
* testsuite/ld-pe/pe-compile.exp: Likewise.
* testsuite/ld-pe/pe-run.exp: Likewise.
* testsuite/ld-pe/pe-run2.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-scripts/align.exp: Likewise.
* testsuite/ld-scripts/alignof.exp: Likewise.
* testsuite/ld-scripts/assert.exp: Likewise.
* testsuite/ld-scripts/defined.exp: Likewise.
* testsuite/ld-scripts/extern.exp: Likewise.
* testsuite/ld-scripts/log2.exp: Likewise.
* testsuite/ld-scripts/map-address.exp: Likewise.
* testsuite/ld-scripts/phdrs.exp: Likewise.
* testsuite/ld-scripts/phdrs2.exp: Likewise.
* testsuite/ld-scripts/script.exp: Likewise.
* testsuite/ld-scripts/section-flags.exp: Likewise.
* testsuite/ld-scripts/sizeof.exp: Likewise.
* testsuite/ld-scripts/sysroot-prefix.exp: Likewise.
* testsuite/ld-scripts/weak.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-sh/sh.exp: Likewise.
* testsuite/ld-sh/sh64/relax.exp: Likewise.
* testsuite/ld-sh/sh64/relfail.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-tic6x/tic6x.exp: Likewise.
* testsuite/ld-undefined/weak-undef.exp: Likewise.
* testsuite/ld-versados/versados.exp: Likewise.
* testsuite/ld-x86-64/dwarfreloc.exp: Likewise.
* testsuite/ld-xtensa/coalesce.exp: Likewise.
* testsuite/ld-xtensa/diff_overflow.exp: Likewise.
* testsuite/ld-xtensa/lcall.exp: Likewise.
* testsuite/ld-elf/audit.exp: Run non-native too.
* testsuite/ld-elf/compress.exp: Likewise. Replace ld options with
gcc -Wl, options.
* testsuite/ld-elf/dwarf.exp: Run non-native too. Use ld_link,
not ld_simple_link. Add -Wl,--no-as-needed to some tests.
* testsuite/ld-elf/elf.exp: Run non-native too. Formatting.
* testsuite/ld-elf/indirect.exp: Run non-native too. Add
-Wl,--no-as-needed to most tests.
* testsuite/ld-elf/shared.exp: Run non-native too. Use braces
to simplify quoting. Set run_tests using [list] rather than
brace assignment to expand $extralibs. Add -Wl,--no-as-needed
to many test. Prefix ld options with -Wl,.
(mix_pic_and_non_pic): Don't run exe if not native.
* testsuite/ld-elf/wrap.exp: Run non-native too. Add
-Wl,--no-as-needed and prefix ld options with -Wl,.
* testsuite/ld-elfvers/vers.exp: Run non-native too. Use ld_link,
not ld_simple_link.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
(visibility_test): Don't run exe if not native.
* testsuite/ld-elfweak/elfweak.exp: Run non-native too. Use ld_link,
not ld_simple_link.
(build_exec): Don't run exe if not native.
* testsuite/ld-ifunc/ifunc.exp: Run non-native too. Use ld_link,
not ld_simple_link. Link using $CC. Add -Wl,--no-as-needed
to some tests and prefix ld options with -Wl,. Expect GNU
for hppa-linux even when no ifuncs. Delete cleanup.
* testsuite/ld-pie/pie.exp: Run non-native too.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise. Use ld_link,
not ld_simple_link.
(shared_test): Don't run exe if not native.
* testsuite/ld-size/size.exp: Run non-native too. Add
-Wl,--no-as-needed to some tests. Prefix ld options with -Wl,.
* testsuite/ld-unique/unique.exp: Run non-native too. Use ld_link,
not ld_simple_link. Link using $CC. Add -Wl,--no-as-needed
to some tests and prefix ld options with -Wl,. Expect GNU
for hppa-linux even when no unique syms. Delete cleanup.
* testsuite/ld-x86-64/tls.exp: Add -Wl,--no-as-needed to some
tests and prefix ld options with -Wl,.
* testsuite/ld-x86-64/x86-64.exp: Use ld_link, not ld_simple_link.
Add -Wl,--no-as-needed to some tests. Prefix ld options with -Wl,.
Leading dashes from an LD error message confuse send_log, because the
string is taken to be an option.
This patch fixes the following DejaGnu error:
--defsym:1: undefined symbol `foo2' referenced in expression
failed with: <--defsym:1: undefined symbol `foo2' referenced in expression>, no expected output
ERROR: tcl error sourcing .../ld/testsuite/ld-gc/gc.exp.
ERROR: usage: send [args] string
while executing
"send_log "$comp_output\n""
(procedure "run_dump_test" line 376)
* testsuite/lib/ld-lib.exp (run_dump_test): Pass -- to send_log.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
PR ld/20995
bfd/
* elflink.c (elf_link_add_object_symbols): Mark relro sections
in dynamic objects SEC_READONLY.
ld/
* testsuite/ld-elf/pr20995c.s: New test file.
* testsuite/ld-elf/pr20995-2so.r: Likewise.
* testsuite/ld-elf/elf.exp: Run it.
Variables defined in shared libraries are copied into an executable's
.bss section when code in the executable is non-PIC and thus would
require dynamic text relocations to access the variable directly in
the shared library. Recent x86 toolchains also copy variables into
the executable to gain a small speed improvement.
The problem is that if the variable was originally read-only, the copy
in .bss is writable, potentially opening a security hole. This patch
cures that problem by putting the copy in a section that becomes
read-only after ld.so relocation, provided -z relro is in force.
The patch also fixes a microblaze linker segfault on attempting to
use dynamic bss variables.
bfd/
PR ld/20995
* elf-bfd.h (struct elf_link_hash_table): Add sdynrelro and
sreldynrelro.
(struct elf_backend_data): Add want_dynrelro.
* elfxx-target.h (elf_backend_want_dynrelro): Define.
(elfNN_bed): Update initializer.
* elflink.c (_bfd_elf_create_dynamic_sections): Create
sdynrelro and sreldynrelro sections.
* elf32-arm.c (elf32_arm_adjust_dynamic_symbol): Place variables
copied into the executable from read-only sections into sdynrelro.
(elf32_arm_size_dynamic_sections): Handle sdynrelro.
(elf32_arm_finish_dynamic_symbol): Select sreldynrelro for
dynamic relocs in sdynrelro.
(elf_backend_want_dynrelro): Define.
* elf32-hppa.c (elf32_hppa_adjust_dynamic_symbol)
(elf32_hppa_size_dynamic_sections, elf32_hppa_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-i386.c (elf_i386_adjust_dynamic_symbol)
(elf_i386_size_dynamic_sections, elf_i386_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-metag.c (elf_metag_adjust_dynamic_symbol)
(elf_metag_size_dynamic_sections, elf_metag_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-microblaze.c (microblaze_elf_adjust_dynamic_symbol)
(microblaze_elf_size_dynamic_sections)
(microblaze_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-nios2.c (nios2_elf32_finish_dynamic_symbol)
(nios2_elf32_adjust_dynamic_symbol)
(nios2_elf32_size_dynamic_sections)
(elf_backend_want_dynrelro): As above.
* elf32-or1k.c (or1k_elf_finish_dynamic_symbol)
(or1k_elf_adjust_dynamic_symbol, or1k_elf_size_dynamic_sections)
(elf_backend_want_dynrelro): As above.
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol)
(ppc_elf_size_dynamic_sections, ppc_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-s390.c (elf_s390_adjust_dynamic_symbol)
(elf_s390_size_dynamic_sections, elf_s390_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-tic6x.c (elf32_tic6x_adjust_dynamic_symbol)
(elf32_tic6x_size_dynamic_sections)
(elf32_tic6x_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-tilepro.c (tilepro_elf_adjust_dynamic_symbol)
(tilepro_elf_size_dynamic_sections)
(tilepro_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol)
(ppc64_elf_size_dynamic_sections, ppc64_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol)
(elf_s390_size_dynamic_sections, elf_s390_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-x86-64.c (elf_x86_64_adjust_dynamic_symbol)
(elf_x86_64_size_dynamic_sections)
(elf_x86_64_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfnn-aarch64.c (elfNN_aarch64_adjust_dynamic_symbol)
(elfNN_aarch64_size_dynamic_sections)
(elfNN_aarch64_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfnn-riscv.c (riscv_elf_adjust_dynamic_symbol)
(riscv_elf_size_dynamic_sections, riscv_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol)
(_bfd_mips_elf_size_dynamic_sections)
(_bfd_mips_vxworks_finish_dynamic_symbol): As above.
* elfxx-sparc.c (_bfd_sparc_elf_adjust_dynamic_symbol)
(_bfd_sparc_elf_size_dynamic_sections)
(_bfd_sparc_elf_finish_dynamic_symbol): As above.
* elfxx-tilegx.c (tilegx_elf_adjust_dynamic_symbol)
(tilegx_elf_size_dynamic_sections)
(tilegx_elf_finish_dynamic_symbol): As above.
* elf32-mips.c (elf_backend_want_dynrelro): Define.
* elf64-mips.c (elf_backend_want_dynrelro): Define.
* elf32-sparc.c (elf_backend_want_dynrelro): Define.
* elf64-sparc.c (elf_backend_want_dynrelro): Define.
* elf32-tilegx.c (elf_backend_want_dynrelro): Define.
* elf64-tilegx.c (elf_backend_want_dynrelro): Define.
* elf32-microblaze.c (microblaze_elf_adjust_dynamic_symbol): Tidy.
(microblaze_elf_size_dynamic_sections): Handle sdynbss.
* elf32-nios2.c (nios2_elf32_size_dynamic_sections): Make use
of linker shortcuts to dynamic sections rather than comparing
names. Correctly set "got" flag.
ld/
PR ld/20995
* testsuite/ld-arm/farcall-mixed-app-v5.d: Update to suit changed
stub hash table traversal caused by section id increment. Accept
the previous output too.
* testsuite/ld-arm/farcall-mixed-app.d: Likewise.
* testsuite/ld-arm/farcall-mixed-lib-v4t.d: Likewise.
* testsuite/ld-arm/farcall-mixed-lib.d: Likewise.
* testsuite/ld-elf/pr20995a.s, * testsuite/ld-elf/pr20995b.s,
* testsuite/ld-elf/pr20995.r: New test.
* testsuite/ld-elf/elf.exp: Run it.
The only target that renames .bss is tic6x, turning .bss into .far,
and .sbss into .bss. .dynbss is not renamed to .dynfar by BFD.
* scripttempl/elf.sc: Don't use $BSS_NAME in .dynbss.
We don't want to report a test failure as a tcl error.
* testsuite/ld-scripts/sysroot-prefix.exp (sysroot_prefix_test_setup):
Call perror rather than error on "as" or "ar" failures.
gas/
* doc/c-lm32.texi: Fix chars with high bit set.
* testsuite/gas/bfin/vector2.s: Likewise.
gold/
* arm.cc: Fix comment chars with high bit set.
include/
* coff/pe.h: Fix comment chars with high bit set.
* opcode/xgate.h: Likewise.
ld/
* testsuite/ld-scripts/sysroot-prefix.exp: Fix chars with high bit set.
TCB_SIZE is 2*sizeof(void *), which is 0x10 for lp64, and 0x8 for
ilp32. During relaxation, ld goes to do a replace:
bl __tls_get_addr => add R0, R0, TCB_SIZE
But actual implementation is:
bfd_putl32 (0x91004000, contents + rel->r_offset + 4);
Which is equivalent of add x0, x0, 0x10. This is wrong for ilp32.
The possible fix for it is:
bfd_putl32 (0x91000000 | (TCB_SIZE<<10), contents + rel->r_offset + 4);
But ilp32 also needs w-registers, so it's simpler to put proper
instruction in #if/#else condition.
There are 2 such relaxations in elfNN_aarch64_tls_relax(), and so 2 new
tests added for ilp32 mode to test it.
Yury
* bfd/elfnn-aarch64.c: fix TLS relaxations for ilp32 where
TCB_SIZE is used.
* ld/testsuite/ld-aarch64/aarch64-elf.exp: Add tests for the case.
* ld/testsuite/ld-aarch64/tls-relax-ld-le-small-ilp32.d: New file.
* ld/testsuite/ld-aarch64/tls-relax-ld-le-tiny-ilp32.d: New file.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
TCB_SIZE is 2*sizeof(void *), which is 0x10 for lp64, and 0x8 for
ilp32. During relaxation, ld goes to do a replace:
bl __tls_get_addr => add R0, R0, TCB_SIZE
But actual implementation is:
bfd_putl32 (0x91004000, contents + rel->r_offset + 4);
Which is equivalent of add x0, x0, 0x10. This is wrong for ilp32.
The possible fix for it is:
bfd_putl32 (0x91000000 | (TCB_SIZE<<10), contents + rel->r_offset + 4);
But ilp32 also needs w-registers, so it's simpler to put proper
instruction in #if/#else condition.
THere are 2 such relaxations in elfNN_aarch64_tls_relax(), and so 2 new
tests added for ilp32 mode to test it.
Yury
HPPA64 needs to add a DT_PHDR header for shared libs. That's fine
when linking but shouldn't happen for strip/objcopy. Also PHDR must
come first so there's no need to look at all program headers.
bfd/
* elf64-hppa.c (elf64_hppa_modify_segment_map): Don't add PHDR
for objcopy/strip or when a ld script specifies PHDRS.
ld/
* testsuite/ld-elf/nobits-1.d: Remove xfail for hppa64.
* testsuite/ld-elf/note-1.d: Likewise.
* testsuite/ld-elf/note-2.d: Likewise.
RX does horrible fudges to PT_LOAD p_vaddr, that affect the testsuite
and mean the target won't support dynamic objects. The latter
probably doesn't matter too much since RX is an embedded target, but
it's easy to stop some of the fudges in order to reduce special cases
for RX in the testsuite. The changes make sense in isolation too.
bfd/
* elf32-rx.c (elf32_rx_modify_program_headers): Don't adjust
segments that include the ELF file header or program headers.
ld/
* testsuite/ld-elf/flags1.d: Run for RX.
* testsuite/ld-scripts/phdrs.exp: Likewise.
* testsuite/ld-scripts/pr14962.d: Likewise.
* testsuite/ld-scripts/pr14962-2.d: Likewise.
Recognize power9 and a few other insns from older machines. Fixes
linker complaints like "toc optimization is not supported for
0xf4090002 instruction". 0xf4090002 is stxsd v0,0(r9)
bfd/
* elf64-ppc.c (ok_lo_toc_insn): Add r_type param. Recognize
lq,lfq,lxv,lxsd,lxssp,lfdp,stq,stfq,stxv,stxsd,stxssp,stfdp.
Don't match lmd and stmd.
ld/
* testsuite/ld-powerpc/tocopt7.s,
* testsuite/ld-powerpc/tocopt7.out,
* testsuite/ld-powerpc/tocopt7.d: New test.
* testsuite/ld-powerpc/tocopt8.s,
* testsuite/ld-powerpc/tocopt8.d: New test.
* testsuite/ld-powerpc/powerpc.exp: Run them.
bfd/ChangeLog:
2016-12-05 Alyssa Milburn <amilburn@zall.org>
* elfxx-sparc.c: Do not stop processing relocations after
partially relaxing a call with WDISP30.
ld/ChangeLog:
2016-12-05 Alyssa Milburn <amilburn@zall.org>
* testsuite/ld-sparc/wdispcall.s: New file.
* testsuite/ld-sparc/wdispcall.dd: Likewise.
* testsuite/ld-sparc/sparc.exp: Run new test.
Lots of fixes for the compatibility code that handles linking of
-mcall-aixdesc code (or that generated by 12 year old gcc) with
current ELFv1 ABI code.
1) A reference to a dot-symbol in an object file wasn't satisfied by a
function descriptor in later object files.
2) The as-needed code had bit-rotted; Shared libs now need a strong
reference to be counted as needed.
3) --gc-sections involving dot-symbols was broken, needing
func_desc_adjust to be run early and lots of other fixes.
bfd/
* elf64-ppc.c (struct ppc_link_hash_entry): Delete "was_undefined".
(struct ppc_link_hash_table): Delete "twiddled_syms". Add
"need_func_desc_adj".
(lookup_fdh): Link direct fdh sym via oh field and set flags.
(make_fdh): Make strong and weak undefined function descriptor
symbols.
(ppc64_elf_merge_symbol): New function.
(elf_backend_merge_symbol): Define.
(ppc64_elf_archive_symbol_lookup): Don't test undefweak for fake
function descriptors.
(add_symbol_adjust): Don't twiddle symbols to undefweak.
Propagate more ref flags to function descriptor symbol. Make
some function descriptor symbols dynamic.
(ppc64_elf_before_check_relocs): Only run add_symbol_adjust for
ELFv1. Set need_func_desc_adj. Don't fix undefs list.
(ppc64_elf_check_relocs): Set non_ir_ref for descriptors.
Don't call lookup_fdh here.
(ppc64_elf_gc_sections): New function.
(bfd_elf64_bfd_gc_sections): Define.
(ppc64_elf_gc_mark_hook): Mark descriptor.
(func_desc_adjust): Don't make fake function descriptor syms strong
here. Exit earlier on non-dotsyms. Take note of elf.dynamic
flag when deciding whether a dynamic function descriptor might
be needed. Transfer elf.dynamic and set elf.needs_plt. Move
plt regardless of visibility. Make descriptor dynamic if
entry sym is dynamic, not for other cases.
(ppc64_elf_func_desc_adjust): Don't run func_desc_adjust if
already done.
(ppc64_elf_edit_opd): Use oh field rather than lookup_fdh.
(ppc64_elf_size_stubs): Likewise.
(ppc_build_one_stub): Don't clear was_undefined. Only set sym
undefweak if stub symbol is defined.
(undo_symbol_twiddle, ppc64_elf_restore_symbols): Delete.
* elf64-ppc.h (ppc64_elf_restore_symbols): Don't declare.
ld/
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_finish): Don't call
ppc64_elf_restore_symbols.
* testsuite/ld-powerpc/dotsym1.d: New.
* testsuite/ld-powerpc/dotsym2.d: New.
* testsuite/ld-powerpc/dotsym3.d: New.
* testsuite/ld-powerpc/dotsym4.d: New.
* testsuite/ld-powerpc/dotsymref.s: New.
* testsuite/ld-powerpc/nodotsym.s: New.
* testsuite/ld-powerpc/powerpc.exp: Run new tests.
* configure.ac: Add fuchsia to targets that use ELF.
* configure: Regenerated.
bfd * configure.tgt: Add support for fuchsia (OS).
gas * configure.tgt: Add support for fuchsia (OS).
ld * Makefile.am: Add dependency information for earmelf_fuchsia.c.
* Makefile.in: Regenerate.
* configure.tgt: Add support for aarch64-*-fuchsia, arm*-*-fuchsia*, and
x86_64-*-fuchsia* targets.
* emulparams/armelf_fuchsia.sh: New file.
* emulparams/armelfb_fuchsia.sh: New file.
PR ld/20868
bfd * elfnn-aarch64.c (elfNN_aarch64_tls_relax): Use 32-bit accesses
to the GOT when operating in 32-bit mode.
ld * testsuite/ld-aarch64/tls-relax-gd-ie-ilp32.d: New test.
* testsuite/ld-aarch64/relocs-ilp32.ld: Linker script for the new
test.
* testsuite/ld-aarch64/aarch64-elf.exp: Run the new test.
Remove duplicate definition of TEMPLATE_NAME, only the last of these
will have any effect, so this should result in no visible changes to the
user.
ld/ChangeLog:
* emulparams/arclinux_prof.sh: Remove duplicate TEMPLATE_NAME.
A hidden versioned symbol in executable should be forced local if it is
locally defined, not referenced by shared library and not exported. We
must do it before _bfd_elf_link_renumber_dynsyms.
bfd/
* elflink.c (_bfd_elf_fix_symbol_flags): Hide hidden versioned
symbol in executable.
(elf_link_output_extsym): Don't change bind from global to
local when linking executable.
ld/
* testsuite/ld-elf/indirect.exp: Add a test for PR 18720.
* testsuite/ld-elf/pr18720.rd: New file.
bfd/
PR target/20737
* elf32-arm.c (elf32_arm_final_link_relocate): Bind defined symbol
locally in PIE.
ld/
* testsuite/ld-arm/pie-bind-locally-a.s: New test source.
* testsuite/ld-arm/pie-bind-locally-b.s: Likewise.
* testsuite/ld-arm/pie-bind-locally.d: New testcase.
* testsuite/ld-arm/arm-elf.exp: Run new testcase.
PR ld/20815
bfd * elf.c (elf_modify_segment_map): Allow empty LOAD segments if
they contain the program headers.
(_bfd_elf_map_sections_to_segments): If the linker created the
PHDR segment then always attempt to include it in a LOAD segment.
(assign_file_positions_for_non_load_sections): Allow LOAD segments
to overlap PHDR segments.
(phdr_sorter): New function. Sorts program headers.
(assign_file_positions_except_relocs): Sort the program headers
before writing them out. Issue an error if the PHDR segment is
not covered by a LOAD segment, unless the backend allows it.
* elf-bfd.h (struct elf_backend_data): Add
elf_backend_allow_non_load_phdr.
* elfxx-target.h (elf_backend_allow_non_load_phdr): Provide
default definition that returns FALSE.
(elfNN_bed): Initialise the elf_backend_allow_non_load_phdr
field.
* elf64-hppa.c (elf64_hppa_allow_non_load_phdr): New function.
Returns TRUE.
(elf_backend_allow_non_load_phdr): Define.
* elf-m10300.c (_bfd_mn10300_elf_size_dynamic_sections): Do not
place the interpreter string into the .interp section if the
nointerp flag is set in the link info structure.
* elf32-arc.c (elf_arc_size_dynamic_sections): Likewise.
* elf32-score7.c (score_elf_final_link_relocate): Allow for the
_gp symbol not being part of the output.
binutils* readelf.c (process_program_headers): Check PT_LOAD and PT_PHDR
segments for validity.
ld * ld.texinfo: Note that PT_TLS can be used as a segment type.
* testsuite/ld-discard/discard.ld: Add space for program headers.
* testsuite/ld-elf/flags1.ld: Likewise.
* testsuite/ld-elf/maxpage3.t: Likewise.
* testsuite/ld-elf/noload-1.t: Likewise.
* testsuite/ld-elf/orphan.ld: Likewise.
* testsuite/ld-elf/overlay.t: Likewise.
* testsuite/ld-elf/pr14052.t: Likewise.
* testsuite/ld-elf/pr19539.t: Likewise.
* testsuite/ld-elf/provide-hidden-1.ld: Likewise.
* testsuite/ld-elf/provide-hidden-s.ld: Likewise.
* testsuite/ld-elf/weak-dyn-1.ld: Likewise.
* testsuite/ld-i386/pr19539.t: Likewise.
* testsuite/ld-scripts/defined.t: Likewise.
* testsuite/ld-scripts/defined6.t: Likewise.
* testsuite/ld-scripts/dynamic-sections.t: Likewise.
* testsuite/ld-scripts/empty-aligned.t: Likewise.
* testsuite/ld-scripts/provide-2.t: Likewise.
* testsuite/ld-scripts/provide-4.t: Likewise.
* testsuite/ld-vax-elf/plt-local.ld: Likewise.
* testsuite/ld-x86-64/pr19539.t: Likewise.
* testsuite/ld-elf/ehdr_start-missing.d: Do not initialise the
dynamic linker.
* testsuite/ld-elf/ehdr_start-weak.d: Likewise.
* testsuite/ld-elf/elf.exp (pr14170, pr17068): Likewise.
* testsuite/ld-elf/loadaddr1.d: Update expected readelf output.
* testsuite/ld-elf/noload-2.d: Likewise.
* testsuite/ld-powerpc/vxworks2.sd: Likewise.
* testsuite/ld-scripts/phdrs3a.d: Likewise.
* testsuite/ld-scripts/size-2.d: Likewise.
* testsuite/ld-elf/group.ld: Add program headers.
* testsuite/ld-elf/overlay.d: Skip for SPU.
* testsuite/ld-elf/flags1.d: Skip for RX.
* testsuite/ld-elf/pr19162.d: Skip for HPPA64.
* testsuite/ld-elf/pr19539.d: Skip for ALPHA.
* testsuite/ld-scripts/empty-orphan.t: Update program headers.
* testsuite/ld-scripts/size-2.t: Likewise.
Fix issues with diff relocs that have a negative value
i.e. sym2 - sym1 where sym2 is lesser than sym1.
The assembler generates a diff reloc with symbol as start of section
and addend as sym2 offset, and encodes assembly time difference at
the reloc offset.
The existing relaxation logic adjusts addends if the relaxed insn lies
between symbol and addend. That doesn't work for diff relocs where
sym2 is less than sym1 *and* the relaxed insn happens to be between
sym2 and sym1.
Fix the problems by
1. Using signed handling of the difference value (bfd_signed_vma instead
of bfd_vma, bfd_{get,set}_signed_xxx instead of bfd_{get,set}_xxx).
2. Not assuming sym2 is bigger than sym1. It instead computes the actual
addresses and sets the lower and higher addresses as start and end
addresses respectively and then sees if insn is between start and end.
3. Creating a new function elf32_avr_adjust_reloc_if_spans_insn to
centralize reloc adjustment, and ensuring diff relocs get adjusted
correctly even if their sym + addend doesn't overlap a relaxed insn.
It also removes a redundant variable did_pad. It is never set if
did_shrink is TRUE, and the code does a early return if did_shrink is
FALSE.
bfd/ChangeLog
2016-11-15 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
PR ld/20789
* bfd/elf32-avr.c (elf32_avr_adjust_diff_reloc_value): Do signed
manipulation of diff value, and don't assume sym2 is less than sym1.
(elf32_avr_adjust_reloc_if_spans_insn): New function.
(elf32_avr_relax_delete_bytes): Use elf32_avr_adjust_diff_reloc_value,
and remove redundant did_pad.
ld/ChangeLog
2016-11-15 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
PR ld/20789
* ld/testsuite/ld-avr/pr20789.d: New test.
* ld/testsuite/ld-avr/pr20789.s: New test.
Since "-z now" replaces PLT with GOT PLT, we should also check GOT PLT
for R_X86_64_PLTOFF64 relocation.
bfd/
PR ld/20800
* elf64-x86-64.c (elf_x86_64_relocate_section): Also check
plt_got.offset for R_X86_64_PLTOFF64.
ld/
PR ld/20800
* testsuite/ld-x86-64/pr20800a.S: New file.
* testsuite/ld-x86-64/pr20800b.S: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/20800 test.
bfd/
PR target/20737
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Bind defined
symbol locally in PIE.
ld/
* testsuite/ld-aarch64/pie-bind-locally-a.s: New test source.
* testsuite/ld-aarch64/pie-bind-locally-b.s: Likewise.
* testsuite/ld-aarch64/pie-bind-locally.d: New testcase.
* testsuite/ld-aarch64/aarch64-elf.exp: Run new testcase.
PR ld/20784
* emultempl/elf32.em (search_needed): Fix infinite loop when
unable to process a token. Add support for curly braced enclosed
tokens.
* ld.texinfo (--rpath-link): Document supprot for $ORIGIN and
$LIB.
* emultempl/elf32.em (search_needed): Remove use of getauxval and
inclusion of <sys/auxv.h>. Replace support for $PLATFORM with a
warning message.
* configure.ac (AC_CHECK_FUNCS): Remove getauxval.
* configure: Regenerate.
* config.in: Regenerate.
Currently the EXCLUDE_FILE linker script construct can only be used
within the input section list, and applied only to the section pattern
immediately following the EXCLUDE_FILE. For example:
*.o (EXCLUDE_FILE (a.o) .text .rodata)
In this case all sections matching '.text' are included from all files
matching '*.o' but not from the file 'a.o'. All sections matching
'.rodata' are also included from all files matching '*.o' (incluing from
'a.o').
If the user wants to restrict the inclusion of section '.rodata' so that
this too is not taken from the file 'a.o' then the above example must be
extended like this:
*.o (EXCLUDE_FILE (a.o) .text EXCLUDE_FILE (a.o) .rodata)
However, due to the internal grammar of the linker script language the
snippet 'EXCLUDE_FILE (a.o) .text' is parsed by a pattern called
'wildcard_spec'. The same 'wildcard_spec' pattern is also used to parse
the input file name snippet '*.o' in the above examples. As a result of
this pattern reuse within the linker script grammar then the following
is also a valid linker script construct:
EXCLUDE_FILE (a.o) *.o (.text .rodata)
However, though the linker accepts this without complaint the
EXCLUDE_FILE part is silently ignored and has no effect.
This commit takes this last example and makes it a useful, valid,
construct. The last example now means to include sections '.text' and
'.rodata' from all files matching '*.o' except for the file 'a.o'.
If the list of input sections is long, and the user knows that the file
exclusion applies across the list then the second form might be a
clearer alternative to replicating the EXCLUDE_FILE construct.
I've added a set of tests for EXCLUDE_FILE to the linker, including
tests for the new functionality.
ld/ChangeLog:
* ldlang.h (struct lang_wild_statement_struct): Add
exclude_name_list field.
* ldlang.c (walk_wild_file_in_exclude_list): New function.
(walk_wild_consider_section): Use new
walk_wild_file_in_exclude_list function.
(walk_wild_file): Add call to walk_wild_file_in_exclude_list.
(print_wild_statement): Print new exclude_name_list field.
(lang_add_wild): Initialise new exclude_name_list field.
* testsuite/ld-scripts/exclude-file-1.d: New file.
* testsuite/ld-scripts/exclude-file-1.map: New file.
* testsuite/ld-scripts/exclude-file-1.t: New file.
* testsuite/ld-scripts/exclude-file-2.d: New file.
* testsuite/ld-scripts/exclude-file-2.map: New file.
* testsuite/ld-scripts/exclude-file-2.t: New file.
* testsuite/ld-scripts/exclude-file-3.d: New file.
* testsuite/ld-scripts/exclude-file-3.map: New file.
* testsuite/ld-scripts/exclude-file-3.t: New file.
* testsuite/ld-scripts/exclude-file-4.d: New file.
* testsuite/ld-scripts/exclude-file-4.map: New file.
* testsuite/ld-scripts/exclude-file-4.t: New file.
* testsuite/ld-scripts/exclude-file-a.s: New file.
* testsuite/ld-scripts/exclude-file-b.s: New file.
* testsuite/ld-scripts/exclude-file.exp: New file.
* ld.texinfo (Input Section Basics): Update description of
EXCLUDE_FILE to cover the new features.
* NEWS: Mention new EXCLUDE_FILE usage.
When creating object files during testing, base the name of the object
file on the name of the source file, rather than using dump0.o,
dump1.o, etc. There's a few places where we have multiple source
files with the same name but in different directories, in these cases,
even after this change, we still add a numerical suffix to make the
object file names unique. So if we have 'foo/src.s' and 'bar/src.s',
we will create object files 'src.o' and 'src1.o'.
Update the few tests that hard code the object file name into the
expected test results.
ld/ChangeLog:
* testsuite/lib/ld-lib.exp (run_dump_test): Use object file names
based on the original source file name.
* testsuite/ld-discard/extern.d: Update object file names.
* testsuite/ld-discard/start.d: Likewise.
* testsuite/ld-discard/static.d: Likewise.
* testsuite/ld-elf/orphan-8.map: Likewise.
Add the xc16x-elf target to the list of targets that do not support
the -shared option. Being missing from this list was causing the
linker to add '-z norelro' to the link line of many tests, which in
turn caused these tests to fail.
ld/ChangeLog:
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Add
xc16x-*-elf to the list of targets that don't support -shared.
Rename file_NAME_list to section_NAME_list in the linker's grammar
file. This rename reflects how the pattern is now being used, and makes
the grammar easier to understand.
There should be no functional change after this commit.
ld/ChangeLog:
* ldgram.y: Rename file_NAME_list to section_NAME_list
throughout.
2016-10-31 Thomas Preud'homme <thomas.preudhomme@arm.com>
ld/
* ldmain.c (add_archive_element): Initialize input->header.type.
* plugin.c (plugin_maybe_claim): Assert the statement is an input
statement.
See https://sourceware.org/ml/binutils/2016-07/msg00091.html
This patch stop --gc-sections elf_gc_sweep_symbol localizing symbols
that ought to remain global.
The difficulty with always descending into output section statements
is that symbols defined by the script in such statements don't have
a bfd section when lang_do_assignments runs early in the link process.
There are two approaches to curing this problem. Either we can
create the bfd section early, or we can use a special section. This
patch takes the latter approach and uses bfd_und_section. (Creating
bfd sections early results in changed output section order, and thus
lots of testsuite failures. You can't create all output sections
early to ensure proper ordering as KEEP then stops empty sections
from being stripped.)
The wrinkle with this approach is that some code that runs at
gc-sections time needs to be made aware of the odd defined symbols
using bfd_und_section.
bfd/
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Handle symbols
defined temporarily with bfd_und_section.
* elflink.c (_bfd_elf_gc_keep): Don't set SEC_KEEP for bfd_und_section.
* elfxx-mips.c (mips_elf_local_pic_function_p): Exclude defined
symbols with bfd_und_section.
ld/
* ldlang.c (lang_do_assignments_1): Descend into output section
statements that do not yet have bfd sections. Set symbol section
temporarily for symbols defined in such statements to the undefined
section. Don't error on data or reloc statements until final phase.
* ldexp.c (exp_fold_tree_1 <etree_assign>): Handle bfd_und_section
in expld.section.
* testsuite/ld-mmix/bpo-10.d: Adjust.
* testsuite/ld-mmix/bpo-11.d: Adjust.
Turned out that by moving the binary start to 256M I've hit a case with
potentially a lot of aliasing in the branch target buffer between
binaries and shared libs. So moving on.
Tested on s390x. No regressions.
ld/ChangeLog:
2016-10-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* emulparams/elf64_s390.sh: Move binary start to 16M.
* testsuite/ld-s390/tlsbin_64.dd: Adjust testcases accordingly.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
Changes the result of ld expressions that were previously plain
numbers to be an absolute address, in the same circumstances where
numbers are treated as absolute addresses.
* ld.texinfo (Expression Section): Update result of arithmetic
expressions.
* ldexp.c (arith_result_section): New function.
(fold_binary): Use it.
Commit b751e639 regressed arm linux kernel builds, that have an
ASSERT (((__hyp_idmap_text_end - (__hyp_idmap_text_start
& ~ (((0x1 << 0xc) - 0x1))))
<= (0x1 << 0xc)), HYP init code too big or misaligned)
Due to some insanity in ld expression evaluation, the integer values
0x1 and 0xc above are treated as absolute addresses (ie. they have an
associated section, *ABS*, see exp_fold_tree_1 case etree_value) while
the expression (0x1 << 0xc) has a plain number result. The left hand
side of the inequality happens to evaluate to a "negative" .text
section relative value. Comparing a section relative value against an
absolute value works since the section relative value is first
converted to absolute. Comparing a section relative value against a
number just compares the offsets, which fails since the "negative"
offset is really a very large positive number.
This patch works around the problem by folding integer expressions, so
the assert again becomes
ASSERT (((__hyp_idmap_text_end - (__hyp_idmap_text_start
& 0xfffffffffffff000))
<= 0x1000), HYP init code too big or misaligned)
* ldexp.c (exp_value_fold): New function.
(exp_unop, exp_binop, exp_trinop): Use it.
This should mean the 2010-10-28 change for ld -r --gc-sections can
be reverted.
* scripttempl/v850.sc: Don't reference __ctbp, __ep, __gp when
not relocating.
* scripttempl/v850_rh850.sc: Likewise.
* ldmain.c (default_bfd_error_handler): New function pointer.
(ld_bfd_error_handler): New function.
(main): Arrange to call it on bfd errors/warnings.
(ld_bfd_assert_handler): Enable tail call.
It was like printf, which means you can't use bfd_set_error_handler to
hook in a function to do something and then call the original handler.
The patch also deletes some unused functions and makes pointers local.
bfd/
* bfd-in.h: Include stdarg.h.
* bfd.c (bfd_error_handler_type): Make like vprintf.
(_bfd_error_internal): Rename from _bfd_error_handler. Make static.
(error_handler_internal): New function, split out from..
(_bfd_default_error_handler): ..here. Rename to _bfd_error_handler.
(bfd_set_error_handler): Update.
(bfd_get_error_handler, bfd_get_assert_handler): Delete.
(_bfd_assert_handler): Make static.
* coffgen.c (null_error_handler): Update params.
* elf-bfd.h (struct elf_backend_data <link_order_error_handler>):
Don't use bfd_error_handler_type.
* elf64-mmix.c (mmix_dump_bpo_gregs): Likewise.
* elfxx-target.h (elf_backend_link_order_error_handler): Default
to _bfd_error_handler.
* libbfd-in.h (_bfd_default_error_handler): Don't declare.
(bfd_assert_handler_type): Likewise.
(_bfd_error_handler): Update.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
ld/
* ldlang.c (ignore_bfd_errors): Update params.
SEC_EXCLUDE is ignored when doing a relocatable link. But we can't
merge 2 input sections with the same name when only one of them has
SHF_EXCLUDE.
PR ld/20528
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Don't
merge 2 sections with different SHF_EXCLUDE.
* testsuite/ld-elf/pr20528a.d: New file.
* testsuite/ld-elf/pr20528a.s: Likewise.
* testsuite/ld-elf/pr20528b.d: Likewise.
* testsuite/ld-elf/pr20528b.s: Likewise.
2016-09-28 Christophe Lyon <christophe.lyon@linaro.org>
PR ld/20608
bfd/
* elf32-arm.c (arm_type_of_stub): Handle the case when the pre-PLT
Thumb-ARM stub is too far.
ld
* testsuite/ld-arm/arm-elf.exp: Handle new testcase.
* testsuite/ld-arm/farcall-mixed-app2.d: New file.
* testsuite/ld-arm/farcall-mixed-app2.r: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.s: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.sym: Likewise.
This patch extends Tag_GNU_Power_ABI_FP to cover long double ABIs,
makes the assembler warn about undefined tag values, and removes
similar warnings from the linker. I think it is better to not
warn in the linker about undefined tag values as future extensions to
the tags then won't result in likely bogus warnings. This is
consistent with the fact that an older linker won't warn on an
entirely new tag.
include/
* elf/ppc.h (Tag_GNU_Power_ABI_FP): Comment.
bfd/
* elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Declare.
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): New function.
(ppc_elf_merge_obj_attributes): Use it. Don't copy first file
attributes, merge them. Don't warn about undefined tag bits,
or copy unknown values to output.
* elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Call
_bfd_elf_ppc_merge_fp_attributes.
binutils/
* readelf.c (display_power_gnu_attribute): Catch truncated section
for all powerpc attributes. Display long double ABI. Don't
capitalize words, except for names. Show known bits of tag values
when some unknown bits are present. Whitespace fixes.
gas/
* config/tc-ppc.c (ppc_elf_gnu_attribute): New function.
(md_pseudo_table <ELF>): Handle "gnu_attribute".
ld/
* testsuite/ld-powerpc/attr-gnu-4-4.s: Delete.
* testsuite/ld-powerpc/attr-gnu-4-14.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-24.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-34.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-41.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Adjust expected warning.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-01.d: Adjust expected output.
* testsuite/ld-powerpc/attr-gnu-4-02.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-03.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-10.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-11.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-20.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-22.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-33.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-8-11.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Don't run deleted tests.
PR ld/20595
ld * testsuite/ld-arm/unwind-4.d: Add -q option to linker command
line and -r option to objdump command line. Match emitted relocs
to make sure that superflous relocs are not generated.
bfd * elf-bfd.h (struct elf_backend_data): Add
elf_backend_count_output_relocs callback to count relocations in
the final output.
* elf-arm.c (elf32_arm_add_relocation): Deleted.
(elf32_arm_write_section): Move additional relocation to emit_relocs.
(elf32_arm_count_output_relocs): New function.
(emit_relocs): New function.
(elf32_arm_emit_relocs): New function.
(elf32_arm_vxworks_emit_relocs): New function.
(elf_backend_emit_relocs): Updated to use the new functions.
(elf_backend_count_output_relocs): New define.
* bfd/elflink.c (bfd_elf_final_link): Do not add additional_reloc_count
to the relocation count.
(_bfd_elf_link_size_reloc_section): Use callback to count the
relocations which will be in output.
(_bfd_elf_default_count_output_relocs): New function.
* bfd/elfxx-target.h (elf_backend_count_output_relocs): New define.
SVE defines new names for existing NZCV conditions, to reflect the
result of instructions like PTEST. This patch adds support for these
names.
The patch also adds comments to the disassembly output to show the
alternative names of a condition code. For example:
cinv x0, x1, cc
becomes:
cinv x0, x1, cc // cc = lo, ul, last
and:
b.cc f0 <...>
becomes:
b.cc f0 <...> // b.lo, b.ul, b.last
Doing this for the SVE names follows the practice recommended by the
SVE specification and is definitely useful when reading SVE code.
If the feeling is that it's too distracting elsewhere, we could add
an option to turn it off.
include/
* opcode/aarch64.h (aarch64_cond): Bump array size to 4.
opcodes/
* aarch64-dis.c (remove_dot_suffix): New function, split out from...
(print_mnemonic_name): ...here.
(print_comment): New function.
(print_aarch64_insn): Call it.
* aarch64-opc.c (aarch64_conds): Add SVE names.
(aarch64_print_operand): Print alternative condition names in
a comment.
gas/
* config/tc-aarch64.c (opcode_lookup): Search for the end of
a condition name, rather than assuming that it will have exactly
2 characters.
(parse_operands): Likewise.
* testsuite/gas/aarch64/alias.d: Add new condition-code comments
to the expected output.
* testsuite/gas/aarch64/beq_1.d: Likewise.
* testsuite/gas/aarch64/float-fp16.d: Likewise.
* testsuite/gas/aarch64/int-insns.d: Likewise.
* testsuite/gas/aarch64/no-aliases.d: Likewise.
* testsuite/gas/aarch64/programmer-friendly.d: Likewise.
* testsuite/gas/aarch64/reloc-insn.d: Likewise.
* testsuite/gas/aarch64/b_c_1.d, testsuite/gas/aarch64/b_c_1.s:
New test.
ld/
* testsuite/ld-aarch64/emit-relocs-280.d: Match branch comments.
* testsuite/ld-aarch64/weak-undefined.d: Likewise.
There was a gap in the documentation of EXCLUDE_FILE that could cause
confusion to a user. When writing an input section specifier like this:
*(EXCLUDE_FILE (somefile.o) .text .text.*)
this could mean one of the following:
1. All '.text' and '.text.*' from all files except for 'somefile.o',
or
2. All '.text' from all files except 'somefile.o', and all '.text.*'
sections from all files.
It turns out that the second interpretation is correct, but the manual
does not make this clear (to me at least). Hopefully this patch makes
things clearer.
ld/ChangeLog:
* ld/ld.texinfo (Input Section Basics): Expand the description of
EXCLUDE_FILE.
bfd/
2016-09-14 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elf32-arm.c (elf32_arm_gc_mark_extra_sections): Only mark section
not already marked.
ld/
2016-09-14 Thomas Preud'homme <thomas.preudhomme@arm.com>
* testsuite/ld-arm/cmse-veneers.s: Add a test for ARMv8-M Security
Extensions entry functions in absolute section.
* testsuite/ld-arm/cmse-veneers.rd: Adapt expected output accordingly.
The assembler accepts dtpoff complex relocation expression like
identifier@dtpoff + const. However, it doesn't accept an expression such
as identifier@dtpoff@base + const. This patch solves this issue, and adds
a number of tests.
ld/
2016-09-14 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/ld-arc/tls-dtpoff.dd: New file.
* testsuite/ld-arc/tls-dtpoff.rd: Likewise.
* testsuite/ld-arc/tls-dtpoff.s: Likewise.
* testsuite/ld-arc/tls-relocs.ld: Likewise.
* testsuite/ld-arc/arc.exp: Add new tdpoff test.
gas/
2016-09-14 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/tls-relocs2.d: New file.
* testsuite/gas/arc/tls-relocs2.s: Likewise.
* config/tc-arc.c (tokenize_arguments): Accept offsets when base
is used.
PR ld/20537
* emultempl/elf32.em: More OPTION_xxx values into an enum. Add
OPTION_NO_EH_FRAME_HDR.
(_add_options): Add support for --no-eh-frame-hdr.
* ld.texinfo: Document new option.
* lexsup.c (elf_shlib_list_options): List new option.
* NEWS: Mention the new option.
We can resolve size relocation against symbol which needs copy relocation
when building executable.
bfd/
PR ld/20550
* elf64-x86-64.c (elf_x86_64_relocate_section): Resolve size
relocation with copy relocation when building executable.
ld/
PR ld/20550
* testsuite/ld-x86-64/pr20550a.s: New file.
* testsuite/ld-x86-64/pr20550b.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp (x86_64tests): Add tests for
PR ld/20550.
* Makefile.am (CFLAGS_FOR_TARGET): Define as a copy of CFLAGS but
without any sanitization options.
(CXXFLAGS_FOR_TARGET): Define as a copy of CXXFLAGS but without
any sanitization options.
(check-DEJAGNU): Pass CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET
as CFLAGS and CXXFLAGS respectively.
Prior to the patch, addends for relocs were being adjusted even if
they went beyond an alignment boundary. This is wrong - to
preserve alignment constraints, the relaxation logic adds as many padding
bytes at the alignment boundary as was deleted, so addends beyond the
boundary should not be adjusted. avr-prop-7.s reproduces this
scenario.
Also, prior to this patch, the relaxation logic assumed that the addr
parameter pointed to the middle of the instruction to be deleted, and
that addr - count would therefore be the shrinked instruction's
address. This is true when actually shrinking instructions.
The alignment constraints handling logic also invokes the same logic
though, with addr as the starting offset of padding bytes and
with count as the number of bytes to be deleted. Calculating the
shrinked insn's address as addr - count is obviously wrong in this
case - that offset would point to count bytes before the last
non-padded byte. avr-prop-8.s reproduces this scenario.
To fix scenario 1, the patch adds an additional check to ensure reloc addends
aren't adjusted if they cross a shrink boundary. The shrink boundary
is either the section size or an alignment boundary. Addends pointing
at an alignment boundary don't need to be adjusted, as padding would
occur and keep the boundary the same. Addends pointing at section size
need to be adjusted though, as no padding occurs and the section size
itself would get decremented. The patch records whether padding
occured (did_pad) and uses that to detect and handle this condition.
To fix scenario 2, the patch adds an additional parameter
(delete_shrinks_insn) to elf32_avr_relax_delete_bytes to distinguish
instruction bytes deletion from padding bytes deletion. It then uses that to
correctly set shrinked_insn_address.
bfd/ChangeLog:
2016-09-02 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
PR ld/20545
* elf32-avr.c (elf32_avr_relax_delete_bytes): Add parameter
delete_shrinks_insn. Modify computation of shrinked_insn_address.
Compute shrink_boundary and adjust addend only if
addend_within_shrink_boundary.
(elf32_avr_relax_section): Modify calls to
elf32_avr_relax_delete_bytes to pass extra parameter.
ld/ChangeLog:
2016-09-02 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
PR ld/20545
* testsuite/ld-avr/avr-prop-7.d: New test.
* testsuite/ld-avr/avr-prop-7.s: New test.
* testsuite/ld-avr/avr-prop-8.d: New test.
* testsuite/ld-avr/avr-prop-8.s: New test.
ld/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* testsuite/ld-arc/tls_gs-01.d: Set to XFAIL on arc*-*-elf*.
* testsuite/ld-arc/tls_ie-01.d: Likewise.
On i386, IFUNC function must be called via PLT. Since PLT in PIC
object uses EBX register, R_386_PLT32 relocation must be used to
call IFUNC function even when IFUNC function is defined locally.
Linker should issue an error when R_386_PC32 relocation is used
to call IFUNC function.
Since PR ld/19784 tests doesn't use PLT relocation to local IFUNC
function, they are moved to the x86-64 test directory.
bfd/
PR ld/14961
PR ld/20515
* elf32-i386.c (elf_i386_check_relocs): Issue an error when
R_386_PC32 relocation is used to call IFUNC function in PIC
object.
ld/
PR ld/14961
PR ld/20515
* testsuite/ld-i386/i386.exp: Run pr20515.
* testsuite/ld-i386/pr20515.d: New file.
* testsuite/ld-i386/pr20515.s: Likewise.
* testsuite/ld-ifunc/ifunc-14a.s: Use R_386_PLT32 to call IFUNC
function.
* testsuite/ld-ifunc/ifunc-14c.s: Likewise.
* testsuite/ld-ifunc/ifunc-2-i386.s: Likewise.
* testsuite/ld-ifunc/ifunc-2-local-i386.s: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Move PR ld/19784 tests to ...
* testsuite/ld-x86-64/x86-64.exp: Here.
* testsuite/ld-ifunc/pr19784a.c: Moved to ...
* testsuite/ld-x86-64/pr19784a.c: Here.
* testsuite/ld-ifunc/pr19784b.c: Moved to ...
* testsuite/ld-x86-64/pr19784b.c: Here.
* testsuite/ld-ifunc/pr19784c.c: Moved to ...
* testsuite/ld-x86-64/pr19784c.c: Here.
2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* bfd-in.h (struct elf32_arm_params): Define.
(bfd_elf32_arm_set_target_relocs): Rename into ...
(bfd_elf32_arm_set_target_params): This. Use a struct
elf32_arm_params to pass all parameters but the bfd and bfd_link_info.
* bfd-in2.h: Regenerate.
* elf32-arm.c (bfd_elf32_arm_set_target_relocs): Rename into ...
(bfd_elf32_arm_set_target_params): This. Pass all values via a struct
elf32_arm_params rather than as individual parameters.
ld/
* emultempl/armelf.em (params): New static variable.
(thumb_entry_symbol, byteswap_code, target1_is_rel, target2_type,
fix_v4bx, use_blx, vfp11_denorm_fix, stm32l4xx_fix, fix_cortex_a8,
no_enum_size_warning, no_wchar_size_warning, pic_veneer,
merge_exidx_entries, fix_arm1176, cmse_implib): move as part of the
above new structure.
(arm_elf_before_allocation): Access static variable from the params
structure.
(gld${EMULATION_NAME}_finish): Likewise.
(arm_elf_create_output_section_statements): Likewise and pass the
address of that structure to bfd_elf32_arm_set_target_relocs instead
of the static variables.
(PARSE_AND_LIST_ARGS_CASES): Access static variable from the params
structure.
Forgot to set should_relocate to TRUE in case of GOT and TLS relocations of
undefined symbols for shared libraries.
In dynamic libraries if symbol is not known the instruction relocation would
not be resolved to point to the respective .got entry.
A test was created to detect similar future mistakes.
bfd/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* elf32-arc.c (elf_arc_relocate_section): Changed. Set should_relocate
to TRUE for GOT and TLS relocs.
ld/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* ld/testsuite/ld-arc/tls_gd-01.s: Added a testcase for this patch.
* ld/testsuite/ld-arc/tls_gd-01.d: Likewise.
When no dynamic relocation was generated the .got content would not be
updated for the TLS_IE_GOT relocation addresses.
bfd/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* arc-got.h (relocate_fix_got_relocs_for_got_info): Fixed addresses in
debug comments. Fixed address in .got related to TLS_IE_GOT dynamic
relocation.
ld/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* testsuite/ld-arc/tls_ie-01.s: Added to verify associated fix.
* testsuite/ld-arc/tls_ie-01.d: Likewise
2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* bfd-in.h (bfd_elf32_arm_set_target_relocs): Add a new parameter for
the input import library bfd.
* bfd-in2.h: Regenerate.
* elf32-arm.c (struct elf32_arm_link_hash_table): New in_implib_bfd
and new_cmse_stub_offset fields.
(stub_hash_newfunc): Initialize stub_offset and stub_template_size to
-1.
(elf32_arm_add_stub): Likewise for stub_offset.
(arm_new_stubs_start_offset_ptr): New function.
(arm_build_one_stub): Only allocate a stub_offset if it is -1. Allow
empty SG veneers to have zero relocations.
(arm_size_one_stub): Only initialize stub size and template
information for non empty veneers. Do not update veneer section size
if veneer already has an offset.
(elf32_arm_create_stub): Return the stub entry pointer or NULL instead
of a boolean indicating success or failure.
(cmse_scan): Change stub_changed parameter into an integer pointer
parameter cmse_stub_created to count the number of stub created and
adapt to change of return value in elf32_arm_create_stub.
(cmse_entry_fct_p): New function.
(arm_list_new_cmse_stub): Likewise.
(set_cmse_veneer_addr_from_implib): Likewise.
(elf32_arm_size_stubs): Define cmse_stub_created, pass its address to
cmse_scan instead of that of cmse_stub_changed to compute the number
of stub created and use it to initialize stub_changed. Call
set_cmse_veneer_addr_from_implib after all cmse_scan. Adapt to change
of return value in elf32_arm_create_stub. Use
arm_stub_section_start_offset () if not NULL to initialize size of
secure gateway veneers section. Initialize stub_offset of Cortex-A8
erratum fix to -1. Use ret to hold return value.
(elf32_arm_build_stubs): Use arm_stub_section_start_offset () if not
NULL to initialize size of secure gateway veneers section. Adapt
comment to stress the importance of zeroing veneer section content.
(bfd_elf32_arm_set_target_relocs): Add new in_implib_bfd parameter to
initialize eponymous field in struct elf32_arm_link_hash_table.
ld/
* emultempl/armelf.em (in_implib_filename): Declare and initialize new
variable.
(arm_elf_create_output_section_statements): Open import input library
file for writing and pass resulting in_implib_bfd to
bfd_elf32_arm_set_target_relocs.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_IN_IMPLIB option.
(PARSE_AND_LIST_LONGOPTS): Define --in-implib option.
(PARSE_AND_LIST_OPTIONS): Add help message for --in-implib option.
(PARSE_AND_LIST_ARGS_CASES): Handle new OPTION_IN_IMPLIB case.
* ld.texinfo (--cmse-implib): Update to mention --in-implib.
(--in-implib): Document new option.
* NEWS: Likewise.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway import library generation): add --defsym VER=1 to gas
CLI.
(Secure gateway import library generation: errors): Likewise.
(Input secure gateway import library): New test.
(Input secure gateway import library: no output import library):
Likewise.
(Input secure gateway import library: not an SG input import library):
Likewise.
(Input secure gateway import library: earlier stub section base):
Likewise.
(Input secure gateway import library: later stub section base):
Likewise.
(Input secure gateway import library: veneer comeback): Likewise.
(Input secure gateway import library: entry function change):
Likewise.
* testsuite/ld-arm/cmse-implib.s: Add input import library testing.
* testsuite/ld-arm/cmse-implib.rd: Update accordingly.
* testsuite/ld-arm/cmse-new-implib.out: New file.
* testsuite/ld-arm/cmse-new-implib.rd: Likewise.
* testsuite/ld-arm/cmse-new-implib-no-output.out: Likewise.
* testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out: Likewise.
* testsuite/ld-arm/cmse-new-earlier-later-implib.out: Likewise.
* testsuite/ld-arm/cmse-new-comeback-implib.rd: Likewise.
* testsuite/ld-arm/cmse-new-wrong-implib.out: Likewise.
This fixes a few problems in the powerpc ld configury.
1) Using powerpc*le-* to test for powerpcle and powerpc64le would
incorrectly match a target triple like powerpc-apple-elf.
2) In the same vein, *64* could match 64 in the user supplied MANUF-OS
part of the target triple.
3) tooldir vars were missing, and some target aliases would result in
ridiculous values for those tdir_* vars given.
4) Since 2016-04-25, BE support was added automatically when asking
for an LE target. If that is a good idea, then so is adding LE
support when asking for BE.
* configure.tgt (powerpc*-*-linux* et al): Rewrite, adding LE
support for BE. First output all target endian configury
values, then opposite endian. Handle more tooldirs. Fix
bogus matches with strings in MANUF-OS part of target triple.
* testsuite/ld-undefined/weak-fundef.s: New.
* testsuite/ld-undefined/weak-undef.t: Don't specify filename.
* testsuite/ld-undefined/weak-undef.exp: Run new tests. Rearrange
much of old code. Use is_elf_format to select targets.
PR ld/20436
* testsuite/lib/ld-lib.exp (check_gcc_plugin_enabled): When not
testing remotely, check to see if target compiler is installed
before trying to run it.
Complement commit b75d42bce5 ("Fix mips segfault on GOT access of
absolute symbol") and unmark the `__ehdr_start' test 2 as known to fail
for the n32 and n64 ABIs, as with the change referred in place the
causing issue has been properly addressed and consequently the tests do
not fail anymore and neither are supposed to.
ld/
PR ld/15428
* testsuite/ld-mips-elf/mips-elf.exp: Un-KFAIL `__ehdr_start'
test 2.
Repeat `PIC and non-PIC test 1' checks for microMIPS LA25 stubs,
covering code generation and stub symbol annotation.
ld/
* testsuite/ld-mips-elf/pic-and-nonpic-1-micromips-rel.dd: New
test.
* testsuite/ld-mips-elf/pic-and-nonpic-1-micromips-rel.nd: New
test.
* testsuite/ld-mips-elf/pic-and-nonpic-1-micromips.dd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1-micromips.nd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1a-micromips.s: New test
source.
* testsuite/ld-mips-elf/pic-and-nonpic-1b-micromips.s: New test
source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Don't run LTO tests if compiler is configured with --disable-plugin.
PR ld/20436
* testsuite/lib/ld-lib.exp (check_gcc_plugin_enabled): New
proc.
(check_lto_available): Return 0 if check_gcc_plugin_enabled
returns 0.
(check_lto_fat_available): Likewise.
(check_lto_shared_available): Likewise.
bfd/
* elf32-arm.c (CMSE_PREFIX): Define macro.
(elf32_arm_stub_cmse_branch_thumb_only): Define stub sequence.
(cmse_branch_thumb_only): Declare stub.
(struct elf32_arm_link_hash_table): Define cmse_stub_sec field.
(elf32_arm_get_plt_info): Add globals parameter. Use it to return
FALSE if there is no PLT.
(arm_type_of_stub): Adapt to new elf32_arm_get_plt_info signature.
(elf32_arm_final_link_relocate): Likewise.
(elf32_arm_gc_sweep_hook): Likewise.
(elf32_arm_gc_mark_extra_sections): Mark sections holding ARMv8-M
secure entry functions.
(arm_stub_is_thumb): Add case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required): Change to a switch case
and add a case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required_alignment): Likewise.
(arm_stub_dedicated_output_section_name): Likewise.
(arm_stub_dedicated_input_section_ptr): Likewise and remove
ATTRIBUTE_UNUSED for htab parameter.
(arm_stub_required_alignment): Likewise.
(arm_stub_sym_claimed): Likewise.
(arm_dedicated_stub_section_padding): Likewise.
(cmse_scan): New function.
(elf32_arm_size_stubs): Call cmse_scan for ARM M profile targets.
Set stub_changed to TRUE if such veneers were created.
(elf32_arm_swap_symbol_in): Add detection code for CMSE special
symbols.
include/
* arm.h (ARM_GET_SYM_CMSE_SPCL): Define macro.
(ARM_SET_SYM_CMSE_SPCL): Likewise.
ld/
* ld.texinfo (Placement of SG veneers): New concept entry.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway veneers: no .gnu.sgstubs section): New test.
(Secure gateway veneers: wrong entry functions): Likewise.
(Secure gateway veneers (ARMv8-M Baseline)): Likewise.
(Secure gateway veneers (ARMv8-M Mainline)): Likewise.
* testsuite/ld-arm/cmse-veneers.s: New file.
* testsuite/ld-arm/cmse-veneers.d: Likewise.
* testsuite/ld-arm/cmse-veneers.rd: Likewise.
* testsuite/ld-arm/cmse-veneers.sd: Likewise.
* testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out: Likewise.
* testsuite/ld-arm/cmse-veneers-wrong-entryfct.out: Likewise.
Convert microMIPS branches and jumps whose delay slot would be filled by
a generated NOP instruction to the corresponding compact form where one
exists, in a manner similar to MIPS16 JR->JRC and JALR->JALRC swap.
Do so even where the transformation switches from a 16-bit to a 32-bit
branch encoding for no benefit in code size reduction, as this is still
advantageous. This is because a branch/NOP pair takes 2 pipeline slots
or a 2-cycle completion latency except in superscalar implementations.
Whereas a compact branch may or may not stall on its target fetch, so it
will at most have a 2-cycle completion latency and may have only 1 even
in scalar implementations, and in superscalar implementations it is
expected to have no worse latency as a branch/NOP pair has. Also it
won't stall and therefore take the extra latency cycle in the not-taken
case.
Technically this is the same as MIPS16 compaction: for the qualifying
instruction encodings the APPEND_ADD_COMPACT machine code generation
method is selected where APPEND_ADD_WITH_NOP otherwise would and tells
the code generator in `append_insn' to convert the regular form of an
instruction to its corresponding compact form. For this the opcode is
tweaked as necessary and the microMIPS opcode table is scanned for the
matching updated instruction. A non-$0 `rt' operand to BEQ and BNE
instructions is moved to the `rs' operand field of BEQZC and BNEZC
encodings as required.
Unlike with MIPS16 compaction however we need to handle out-of-distance
branch relaxation as well. We do this by deferring the generation of
any delay-slot NOP required to relaxation made in `md_convert_frag', by
converting the APPEND_ADD_WITH_NOP machine code generation to APPEND_ADD
where a relaxed instruction is recorded. Relaxation then, depending on
actual code produced, chooses between either using a compact branch or
jump encoding and emitting the NOP outstanding if no compact encoding is
possible.
For code simplicity's sake the relaxation pass is retained even if the
principle of preferring a compact encoding to a 16-bit branch/NOP pair
means, in the absence of out-of-range branch relaxation, that a single
compact branch machine code instruction will eventually be produced from
a given assembly source instruction.
gas/
* config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Add `nods' flag.
(RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16)
(RELAX_MICROMIPS_MARK_TOOFAR16, RELAX_MICROMIPS_CLEAR_TOOFAR16)
(RELAX_MICROMIPS_TOOFAR32, RELAX_MICROMIPS_MARK_TOOFAR32)
(RELAX_MICROMIPS_CLEAR_TOOFAR32): Shift bits.
(get_append_method): Also return APPEND_ADD_COMPACT for
microMIPS instructions.
(find_altered_mips16_opcode): Exclude macros from matching.
Factor code out...
(find_altered_opcode): ... to this new function.
(find_altered_micromips_opcode): New function.
(frag_branch_delay_slot_size): Likewise.
(append_insn): Handle microMIPS branch/jump compaction.
(macro_start): Likewise.
(relaxed_micromips_32bit_branch_length): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/micromips.s: Add conditional explicit NOPs
for delay slot filling.
* testsuite/gas/mips/micromips-b16.s: Add explicit NOPs for
delay slot filling.
* testsuite/gas/mips/micromips-size-1.s: Likewise.
* testsuite/gas/mips/micromips.l: Adjust line numbers.
* testsuite/gas/mips/micromips-warn.l: Likewise.
* testsuite/gas/mips/micromips-size-1.l: Likewise.
* testsuite/gas/mips/micromips.d: Adjust padding.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips-insn32.d: Likewise.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips@beq.d: Update patterns for
branch/jump compaction.
* testsuite/gas/mips/micromips@bge.d: Likewise.
* testsuite/gas/mips/micromips@bgeu.d: Likewise.
* testsuite/gas/mips/micromips@blt.d: Likewise.
* testsuite/gas/mips/micromips@bltu.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d:
Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d:
Likewise.
* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
* testsuite/gas/mips/micromips@loc-swap-dis.d: Likewise.
* testsuite/gas/mips/micromips@relax.d: Likewise.
* testsuite/gas/mips/micromips@relax-at.d: Likewise.
* testsuite/gas/mips/micromips@relax-swap3.d: Likewise.
* testsuite/gas/mips/branch-extern-2.d: Likewise.
* testsuite/gas/mips/branch-extern-4.d: Likewise.
* testsuite/gas/mips/branch-section-2.d: Likewise.
* testsuite/gas/mips/branch-section-4.d: Likewise.
* testsuite/gas/mips/branch-weak-2.d: Likewise.
* testsuite/gas/mips/branch-weak-5.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
Likewise.
* testsuite/gas/mips/micromips-compact.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
ld/
* testsuite/ld-mips-elf/micromips-branch-absolute.d: Update
patterns for branch compaction.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend.d:
Likewise.
opcodes/
* micromips-opc.c (micromips_opcodes): Reorder "bc" next to "b",
"beqzc" next to "beq", "bnezc" next to "bne" and "jrc" next to
"j".
Complement:
commit 1bbce13264
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Mon Jun 24 23:55:46 2013 +0000
<https://sourceware.org/ml/binutils/2013-06/msg00077.html>, ("MIPS:
Compressed PLT/stubs support"), and also choose between regular and
compressed PLT entries as appropriate for any branches referring.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): Handle branches
in PLT compression selection.
(_bfd_mips_elf_check_relocs): Likewise.
ld/
* testsuite/ld-mips-elf/compressed-plt-1.s: Add branch support.
* testsuite/ld-mips-elf/compressed-plt-1a.s: Likewise.
* testsuite/ld-mips-elf/compressed-plt-1b.s: Likewise.
* testsuite/ld-mips-elf/compressed-plt-1-o32-branch.od: New
test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-branch.rd: New
test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-bronly.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-bronly.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-branch.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-branch.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-bronly.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-bronly.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-branch.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-branch.rd:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
ld * ldbuildid.c: Changes for MinGW32:
Include windows.h and rpcdce.h.
(validate_build_id_style): Allow "uuid" style.
(generate_build_id): Fill in id_bits using UuidCreate().
* testsuite/ld-elf/sec64k.exp: Run test for arc, msp430, or1k
and m32r. Correct comment. Relax ld -r match to account for
msp increased number of default sections.
bfd * arc-got.h (relocate_fix_got_relocs_for_got_info): Handle the case
where there's no elf_link_hash_entry while processing GOT_NORMAL got
entries.
ld * testsuite/ld-arc/got-01.d: New file.
* testsuite/ld-arc/got-01.s: New file.
If the last parameter of a tcl function is "args" then it can take
zero or more arguments. Make use of this language feature in
run_ld_link_exec_tests.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Replace
"targets_to_xfail" parameter with "args".
* testsuite/ld-elf/compress.exp: Remove empty list of xfails on
all calls to run_ld_link_exec_tests.
* testsuite/ld-elf/dwarf.exp: Likewise.
* testsuite/ld-elf/indirect.exp: Likewise.
* testsuite/ld-elf/wrap.exp: Likewise.
* testsuite/ld-i386/i386.exp: Likewise.
* testsuite/ld-i386/no-plt.exp: Likewise.
* testsuite/ld-i386/tls.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-pie/pie.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-size/size.exp: Likewise.
* testsuite/ld-x86-64/mpx.exp: Likewise.
* testsuite/ld-x86-64/no-plt.exp: Likewise.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-elf/elf.exp: Likewise. Reorder args when providing
xfails and simplify lists.
* testsuite/ld-elf/shared.exp: Likewise.
bfd/
* elf.c (_bfd_elf_filter_global_symbols): Skip local symbols.
(swap_out_syms): Return an error when not finding ELF output
section rather than asserting.
* elflink.c (elf_output_implib): Call bfd_set_error on no symbols.
ld/
* testsuite/lib/ld-lib.exp (run_ld_link_tests): Add optional
parameter to pass list of xfails.
* testsuite/ld-elf/elf.exp: Add xfails for implib tests. Tidy
implib test formatting. Don't set .data start address.
* testsuite/ld-elf/implib.s: Remove first .bss directive and
replace second one with equivalent .section directive.
* testsuite/ld-elf/empty-implib.out: Add expected final error.
* testsuite/ld-elf/implib.rd: Update.
Issue an error if p_paddr becomes invalid when allocating space for
program headers.
PR ld/20376
* elf.c (assign_file_positions_for_load_sections): Also check
p_paddr for program header space.
Folding a constant expression early can lead to loss of tokens, eg.
ABSOLUTE, that are significant in ld's horrible context sensitive
expression evaluation. Also, MAXPAGESIZE and other "constants" may
not have taken values specified on the command line, leading to the
wrong value being cached.
* ldexp.c (exp_unop, exp_binop, exp_trinop, exp_nameop): Don't
fold expression.
* testsuite/ld-elf/maxpage3b.d: Expect correct maxpagesize.
Convert cross-mode regular MIPS and microMIPS BAL instructions to JALX,
similarly to how JAL instructions are converted.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Convert cross-mode
BAL to JALX.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add a
corresponding error message.
gas/
* config/tc-mips.c (mips_force_relocation, mips_fix_adjustable):
Adjust comments for BAL to JALX linker conversion.
(fix_bad_cross_mode_branch_p): Accept cross-mode BAL.
* testsuite/gas/mips/unaligned-branch-1.l: Update error messages
expected.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: Likewise.
* testsuite/gas/mips/branch-local-4.d: New test.
* testsuite/gas/mips/branch-local-n32-4.d: New test.
* testsuite/gas/mips/branch-local-n64-4.d: New test.
* testsuite/gas/mips/branch-addend.d: New test.
* testsuite/gas/mips/branch-addend-n32.d: New test.
* testsuite/gas/mips/branch-addend-n64.d: New test.
* testsuite/gas/mips/branch-local-4.s: New test source.
* testsuite/gas/mips/branch-addend.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/unaligned-branch-2.d: Update error
messages expected.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-addend.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n64.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-3.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.s: New test
source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.s: New test
source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Verify that the ISA mode of branch targets is the same as the referring
relocation, so that an attempt to produce a branch between instructions
encoded in different ISA modes each causes an error rather than silently
producing non-functional code. Make sure that no symbol or addend bits
are silently truncated: terminate with an error if the relocation value
calculated cannot be encoded in the relocatable field of a branch; for
REL targets also applying to any intermediate addend.
Also make jump target's alignment verification consistent with that for
branches.
This change will require an update to some obscure handcoded assembly
sources which make branches to labels placed at data objects, however
for microMIPS code only. These labels will have to be updated with the
`.insn' directive for containing code to assemble and link successfully.
Such code is broken as any such labels have always been required by the
microMIPS architecture specification[1][2] to be annotated this way for
correct interpretation, and with our old code missing `.insn' directives
caused labels to present different semantics depending on whether they
were referred with branch (ISA bit ignored) or other relocations (ISA
bit respected).
Enforcing these checks however will ensure errors in building software,
like mixed regular MIPS and microMIPS code links with branches between,
will be diagnosed at the build time rather than causing odd run-time
errors such as intermittent crashes. It will also let cross-mode BAL
instructions be converted to JALX instructions, with a separate change.
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 7.1 "Assembly-Level
Compatibility", p. 533
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 8.1 "Assembly-Level
Compatibility", p. 623
bfd/
* elfxx-mips.c (b_reloc_p): Add R_MICROMIPS_PC16_S1,
R_MICROMIPS_PC10_S1 and R_MICROMIPS_PC7_S1.
(branch_reloc_p): New function.
(mips_elf_calculate_relocation): Handle ISA mode determination
for relocations against section symbols, against absolute
symbols and absolute relocations. Also set `*cross_mode_jump_p'
for branches.
<R_MIPS16_26, R_MIPS_26, R_MICROMIPS_26_S1>: Suppress alignment
checks for weak undefined symbols. Also check target alignment
within the same ISA mode.
<R_MIPS_PC16, R_MIPS_GNU_REL16_S2>: Handle cross-mode branches
in the alignment check.
<R_MICROMIPS_PC7_S1>: Add an alignment check.
<R_MICROMIPS_PC10_S1>: Likewise.
<R_MICROMIPS_PC16_S1>: Likewise.
(mips_elf_perform_relocation): Report a failure for unsupported
same-mode JALX instructions and cross-mode branches.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add
error messages for jumps to misaligned addresses.
gas/
* config/tc-mips.c (mips_force_relocation): Also retain branch
relocations against MIPS16 and microMIPS symbols.
(fix_bad_cross_mode_jump_p): New function.
(fix_bad_same_mode_jalx_p): Likewise.
(fix_bad_misaligned_jump_p): Likewise.
(fix_bad_cross_mode_branch_p): Likewise.
(fix_bad_misaligned_branch_p): Likewise.
(fix_validate_branch): Likewise.
(md_apply_fix) <BFD_RELOC_MIPS_JMP, BFD_RELOC_MIPS16_JMP>
<BFD_RELOC_MICROMIPS_JMP>: Separate from BFD_RELOC_MIPS_SHIFT5,
etc. Verify the ISA mode and alignment of the jump target.
<BFD_RELOC_MIPS_21_PCREL_S2>: Replace the inline alignment check
with a call to `fix_validate_branch'.
<BFD_RELOC_MIPS_26_PCREL_S2>: Likewise.
<BFD_RELOC_16_PCREL_S2>: Likewise.
<BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1>
<BFD_RELOC_MICROMIPS_16_PCREL_S1>: Retain the original addend.
Verify the ISA mode and alignment of the branch target.
(md_convert_frag): Verify the ISA mode and alignment of resolved
MIPS16 branch targets.
* testsuite/gas/mips/branch-misc-1.s: Annotate non-instruction
branch targets with `.insn'.
* testsuite/gas/mips/branch-misc-5.s: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Update
accordingly.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips-branch-relax.s: Annotate
non-instruction branch target with `.insn'.
* testsuite/gas/mips/micromips.s: Replace microMIPS JALX targets
with external symbols.
* testsuite/gas/mips/micromips-insn32.d: Update accordingly.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips.d: Likewise.
* testsuite/gas/mips/mips16.s: Annotate non-instruction branch
targets with `.insn'.
* testsuite/gas/mips/mips16.d: Update accordingly.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-dwarf2.s: Annotate non-instruction
branch target with `.insn'.
* testsuite/gas/mips/relax-swap3.s: Likewise.
* testsuite/gas/mips/branch-local-2.l: New list test.
* testsuite/gas/mips/branch-local-3.l: New list test.
* testsuite/gas/mips/branch-local-n32-2.l: New list test.
* testsuite/gas/mips/branch-local-n32-3.l: New list test.
* testsuite/gas/mips/branch-local-n64-2.l: New list test.
* testsuite/gas/mips/branch-local-n64-3.l: New list test.
* testsuite/gas/mips/unaligned-jump-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-3.d: New test.
* testsuite/gas/mips/unaligned-jump-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-jump-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-3.d: New test.
* testsuite/gas/mips/unaligned-branch-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-3.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-3.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-4.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-5.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-6.d: New test.
* testsuite/gas/mips/unaligned-branch-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-3.d: New test.
* testsuite/gas/mips/branch-local-2.s: New test source.
* testsuite/gas/mips/branch-local-3.s: New test source.
* testsuite/gas/mips/branch-local-n32-2.s: New test source.
* testsuite/gas/mips/branch-local-n32-3.s: New test source.
* testsuite/gas/mips/branch-local-n64-2.s: New test source.
* testsuite/gas/mips/branch-local-n64-3.s: New test source.
* testsuite/gas/mips/unaligned-jump-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-jump-micromips-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-3.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-4.s: New test source.
* testsuite/gas/mips/unaligned-branch-mips16-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-mips16-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-2.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/unaligned-jalx-1.d: Update error message
expected.
* testsuite/ld-mips-elf/unaligned-jalx-addend-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: Likewise.
* testsuite/ld-mips-elf/undefweak-overflow.s: Add jumps,
microMIPS BAL and MIPS16 instructions.
* testsuite/ld-mips-elf/undefweak-overflow.d: Update
accordingly.
* testsuite/ld-mips-elf/unaligned-branch-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
When using the plugin interface to claim an input file the claim method
from (possible) many plugins can be called on an input file. If these
claim methods read content from the input file then the file offset
stored in the underlying file descriptor will change.
As we share a file descriptor between the plugin interface (created with
dup in ld/plugin.c:plugin_object_p) and the input bfd object, then any
changes to the file offset in the file descriptor will effect the bfd
object. Also, as the changes to the file offset did not originate from
calls through the bfd interface, but instead came from the plugin
directly, then the bfd will not be aware that the file offset has
changed. This is a problem as the bfd library caches the file offset.
If the plugin decides not to claim an input file then, currently, we
leave the bfd in a state where the actual file offset is out of sync
with the cached file offset.
This problem came to light after a recent commit
7d0b9ebc1e (Don't include libbfd.h outside
of bfd, part 6) however, I don't believe that commit actual introduces
the bug, it just exposed the existing issue.
This commit solves the problem by backing up and restoring the file
offset for the file descriptor of the input file. The restore is only
done if the plugin does not claim the input file, as it is in this case
that the bfd library might be used again to try and identify the
unclaimed file.
ld/ChangeLog:
* plugin.c (plugin_call_claim_file): Restore the file offset after
an unsuccessful attempt to claim a file.
* testplug.c (bytes_to_read_before_claim): New global.
(record_read_length): New function, sets new global
bytes_to_read_before_claim.
(parse_option): Handle 'read:<NUMBER>' option.
(onclaim_file): Read file content before checking for claim.
* testsuite/ld-plugin/plugin-30.d: New file.
* testsuite/ld-plugin/plugin.exp: Add new test.
Some messing with plugin code in order to not need arelt_size in
ld code. File descriptor handling in ld/plugin.c is tidied too,
simply duping the open fd rather than opening the file again.
bfd/
* elflink.c: Include plugin-api.h.
* plugin.c (bfd_plugin_open_input): New function, extracted from..
(try_claim): ..here.
* plugin.h: Don't include bfd.h.
(bfd_plugin_open_input): Declare.
binutils/
* ar.c: Include plugin-api.h.
* nm.c: Likewise.
ld/
* plugin.c: Don't include libbfd.h. Include plugin-api.h
before bfd/plugin.h.
(plugin_object_p): Use bfd_plugin_open_input.
Not much to see here, just renaming a function.
bfd/
* targets.c (bfd_seach_for_target): Rename to..
(bfd_iterate_over_targets): ..this. Rewrite doc.
* bfd-in2.h: Regenerate.
ld/
* ldlang.c (open_output): Replace bfd_search_for_target with
bfd_iterate_over_targets. Localize vars.
bfd * elf32-arc.c (PR_DEBUG): Delete.
Fix printing of debug information. Fix formatting of debug
statements.
(debug_arc_reloc): Handle symbols that are not from an input file.
(arc_do_relocation): Remove excessive exclamation points.
(elf_arc_relocate_section): Print an informative message if the
relocation fails, even if debugging is not enabled.
* arc-got.h: Fix formatting. Fix printing of debug information.
(new_got_entry_to_list): Use xmalloc.
* config.bfd: use the big-endian arc vector as the default vector
for big-endian arc targets.
ld * testsuite/ld-arc/arc.exp: Always run the sda-relocs test in
little endian mode.
Don't convert PC-relative REL relocations against absolute symbols to
section-relative references and retain the original symbol reference
instead. Offsets into the absolute section may overflow the limited
range of their in-place addend field, causing an assembly error, e.g.:
$ cat test.s
.text
.globl foo
.ent foo
foo:
b bar
.end foo
.set bar, 0x12345678
$ as -EB -32 -o test.o test.s
test.s: Assembler messages:
test.s:3: Error: relocation overflow
$
With the original reference retained the source can now be assembled and
linked successfully:
$ as -EB -32 -o test.o test.s
$ objdump -dr test.o
test.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 1000ffff b 0 <foo>
0: R_MIPS_PC16 bar
4: 00000000 nop
...
$ ld -melf32btsmip -Ttext 0x12340000 -e foo -o test test.o
$ objdump -dr test
test: file format elf32-tradbigmips
Disassembly of section .text:
12340000 <foo>:
12340000: 1000159d b 12345678 <bar>
12340004: 00000000 nop
...
$
For simplicity always retain the original symbol reference, even if it
would indeed fit.
Making TC_FORCE_RELOCATION_ABS separate from TC_FORCE_RELOCATION causes
R_MICROMIPS_PC7_S1, R_MICROMIPS_PC10_S1 and R_MICROMIPS_PC16_S1 branch
relocations against absolute symbols to be converted on RELA targets to
section-relative references. This is an intended effect of this change.
Absolute symbols carry no ISA annotation in their `st_other' field and
their value is not going to change with linker relaxation, so it is safe
to discard the original reference and keep the calculated final symbol
value only in the relocation's addend.
Similarly R6 R_MIPS_PCHI16 and R_MIPS_PCLO16 relocations referring
absolute symbols can be safely converted even on REL targets, as there
the in-place addend of these relocations covers the entire 32-bit
address space so it can hold the calculated final symbol value, and
likewise the value referred won't be affected by any linker relaxation.
Add a set of suitable test cases and enable REL linker tests which now
work and were previously used as dump patterns for RELA tests only.
gas/
* config/tc-mips.h (TC_FORCE_RELOCATION_ABS): New macro.
(mips_force_relocation_abs): New prototype.
* config/tc-mips.c (mips_force_relocation_abs): New function.
* testsuite/gas/mips/branch-absolute.d: Adjust dump patterns.
* testsuite/gas/mips/mips16-branch-absolute.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
Likewise.
* testsuite/gas/mips/branch-absolute-addend.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-addend.d: New
test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Run
`branch-absolute-addend', `mips16-branch-absolute',
`mips16-branch-absolute-addend' and
`micromips-branch-absolute-addend'.
Correct a problem with the ISA bit being stripped from the addend of
compressed branch relocations, affecting RELA targets. It has been
there since microMIPS support has been added, with:
commit df58fc944d
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Sun Jul 24 14:20:15 2011 +0000
<https://sourceware.org/ml/binutils/2011-07/msg00198.html>, ("MIPS:
microMIPS ASE support") and R_MICROMIPS_PC7_S1, R_MICROMIPS_PC10_S1 and
R_MICROMIPS_PC16_S1 relocations originally affected, and the
R_MIPS16_PC16_S1 relocation recently added with commit c9775dde32
("MIPS16: Add R_MIPS16_PC16_S1 branch relocation support") actually
triggering a linker error, due to its heightened processing strictness
level:
$ cat test.s
.text
.set mips16
foo:
b bar
.set bar, 0x1235
.align 4, 0
$ as -EB -n32 -o test.o test.s
$ objdump -dr test.o
test.o: file format elf32-ntradbigmips
Disassembly of section .text:
00000000 <foo>:
0: f000 1000 b 4 <foo+0x4>
0: R_MIPS16_PC16_S1 *ABS*+0x1230
...
$ ld -melf32btsmipn32 -Ttext 0 -e 0 -o test test.o
test.o: In function `foo':
(.text+0x0): Branch to a non-instruction-aligned address
$
This is because the ISA bit of the branch target does not match the ISA
bit of the referring branch, hardwired to 1 of course.
Retain the ISA bit then, so that the linker knows this is really MIPS16
code referred:
$ objdump -dr fixed.o
fixed.o: file format elf32-ntradbigmips
Disassembly of section .text:
00000000 <foo>:
0: f000 1000 b 4 <foo+0x4>
0: R_MIPS16_PC16_S1 *ABS*+0x1231
...
$ ld -melf32btsmipn32 -Ttext 0 -e 0 -o fixed fixed.o
$
Add a set of MIPS16 tests to cover the relevant cases, excluding linker
tests though which would overflow the in-place addend on REL targets and
use them as dump patterns for RELA targets only.
gas/
* config/tc-mips.c (md_apply_fix) <BFD_RELOC_MIPS16_16_PCREL_S1>
<BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1>
<BFD_RELOC_MICROMIPS_16_PCREL_S1>: Keep the ISA bit in the
addend calculated.
* testsuite/gas/mips/mips16-branch-absolute.s: Set the ISA bit
in `bar', export `foo'.
* testsuite/gas/mips/mips16-branch-absolute.d: Adjust
accordingly.
* testsuite/gas/mips/mips16-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/mips16-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64.d:
Likewise.
ld/
* testsuite/ld-mips-elf/mips16-branch-absolute.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n32.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n64.d: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests, except
from `mips16-branch-absolute' and
`mips16-branch-absolute-addend', referred indirectly only.
Fix a generic BFD issue with relocations against absolute symbols, which
are installed without using any individual relocation handler provided
by the backend. This causes any absolute section's addend to be lost on
REL targets such as o32 MIPS, and also relocation-specific calculation
adjustments are not made.
As an example assembling this program:
$ cat test.s
.text
foo:
b bar
b baz
.set bar, 0x1234
$ as -EB -32 -o test-o32.o test.s
$ as -EB -n32 -o test-n32.o test.s
produces this binary code:
$ objdump -dr test-o32.o test-n32.o
test-o32.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 10000000 b 4 <foo+0x4>
0: R_MIPS_PC16 *ABS*
4: 00000000 nop
8: 1000ffff b 8 <foo+0x8>
8: R_MIPS_PC16 baz
c: 00000000 nop
test-n32.o: file format elf32-ntradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 10000000 b 4 <foo+0x4>
0: R_MIPS_PC16 *ABS*+0x1230
4: 00000000 nop
8: 10000000 b c <foo+0xc>
8: R_MIPS_PC16 baz-0x4
c: 00000000 nop
$
where it is clearly visible in `test-o32.o', which uses REL relocations,
that the absolute section's addend equivalent to the value of `bar' -- a
reference to which cannot be fully resolved at the assembly time,
because the reference is PC-relative -- has been lost, as has been the
relocation-specific adjustment of -4, required to take into account the
PC+4-relative calculation made by hardware with branches and seen in the
external symbol reference to `baz' as the `ffff' addend encoded in the
instruction word. In `test-n32.o', which uses RELA relocations, the
absolute section's addend has been correctly retained.
Give precedence then in `bfd_perform_relocation' and
`bfd_install_relocation' to any individual relocation handler the
backend selected may have provided, while still resorting to the generic
calculation otherwise. This retains the semantics which we've had since
forever or before the beginning of our repository history, and is at the
very least compatible with `bfd_elf_generic_reloc' being used as the
handler.
Retain the `bfd_is_und_section' check unchanged at the beginning of
`bfd_perform_relocation' since this does not affect the semantics of the
function. The check returns the same `bfd_reloc_undefined' code the
check for a null `howto' does, so swapping the two does not matter.
Also the check is is mutually exclusive with the `bfd_is_abs_section'
check, since a section cannot be absolute and undefined both at once, so
swapping the two does not matter either.
With this change applied the program quoted above now has the in-place
addend correctly calculated and installed in the field being relocated:
$ objdump -dr fixed-o32.o
fixed-o32.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 1000048c b 1234 <bar>
0: R_MIPS_PC16 *ABS*
4: 00000000 nop
8: 1000ffff b 8 <foo+0x8>
8: R_MIPS_PC16 baz
c: 00000000 nop
$
Add a set of MIPS tests to cover the relevant cases, including absolute
symbols with addends, and verifying that PC-relative relocations against
symbols concerned resolve to the same value in the final link regardless
of whether the REL or the RELA relocation form is used. Exclude linker
tests though which would overflow the in-place addend on REL targets and
use them as dump patterns for RELA targets only.
bfd/
* reloc.c (bfd_perform_relocation): Try the `howto' handler
first with relocations against absolute symbols.
(bfd_install_relocation): Likewise.
gas/
* testsuite/gas/mips/mips16-branch-absolute.d: Update patterns.
* testsuite/gas/mips/branch-absolute.d: New test.
* testsuite/gas/mips/branch-absolute-n32.d: New test.
* testsuite/gas/mips/branch-absolute-n64.d: New test.
* testsuite/gas/mips/branch-absolute-addend-n32.d: New test.
* testsuite/gas/mips/branch-absolute-addend-n64.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n32.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n64.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64.d: New
test.
* testsuite/gas/mips/micromips-branch-absolute.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d: New
test.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d: New
test.
* testsuite/gas/mips/branch-absolute.s: New test source.
* testsuite/gas/mips/branch-absolute-addend.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute-addend.s: New test
source.
* testsuite/gas/mips/micromips-branch-absolute.s: New test
source.
* testsuite/gas/mips/micromips-branch-absolute-addend.s: New
test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/branch-absolute.d: New test.
* testsuite/ld-mips-elf/branch-absolute-n32.d: New test.
* testsuite/ld-mips-elf/branch-absolute-n64.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend-n32.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend-n64.d: New test.
* testsuite/ld-mips-elf/micromips-branch-absolute.d: New test.
* testsuite/ld-mips-elf/micromips-branch-absolute-n32.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-n64.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend-n32.d:
New test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend-n64.d:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests, except
from `branch-absolute-addend' and
`micromips-branch-absolute-addend', referred indirectly only.
The R_ARC_SDA32 is wrongly described as a ME relocation, fix it. Offset the
__SDATA_BEGIN__ to take advantage of the signed 9-bit field of the
load/store instructions.
include/
2016-07-08 Claudiu Zissulescu <claziss@synopsys.com>
* elf/arc-reloc.def (ARC_SDA32): Don't use ME transformation.
ld/
2016-07-08 Claudiu Zissulescu <claziss@synopsys.com>
* emulparams/arcelf.sh (SDATA_START_SYMBOLS): Add offset.
* testsuite/ld-arc/sda-relocs.dd: New file.
* testsuite/ld-arc/sda-relocs.ld: Likewise.
* testsuite/ld-arc/sda-relocs.rd: Likewise.
* testsuite/ld-arc/sda-relocs.s: Likewise.
* testsuite/ld-arc/arc.exp: Add SDA tests.
binutils/
PR binutils/20337
* objdump.c (compare_symbols): For ELF, sort same value/type
symbols according to size.
ld/
* testsuite/ld-powerpc/elfv2exe.d: Update.
Fix a typo (__PMSIZE was written as __PMSIZE_) and add section alignment
for DATA and BSS.
ld/ChangeLog:
* scripttempl/ft32.sc (__PMSIZE): Correct __PMSIZE_.
(DATA): add ALIGN.
(BSS): add ALIGN
Before GCC 4.9, -flto is required for final LTO link. Add -flto to PR
ld/20321 test to support older versions of GCC.
* testsuite/ld-plugin/lto.exp: Add -flto to PR ld/20321 test.
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* elf32-arm.c (THUMB32_MOVT): New veneer macro.
(THUMB32_MOVW): Likewise.
(elf32_arm_stub_long_branch_thumb2_only_pure): New.
(DEF_STUBS): Define long_branch_thumb2_only_pure.
(arm_stub_is_thumb): Add new veneer stub.
(arm_type_of_stub): Use new veneer.
(arm_stub_required_alignment): Add new veneer.
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* testsuite/ld-arm/farcall-thumb2-purecode.d: New test result.
* testsuite/ld-arm/farcall-thumb2-purecode.s: New test.
* testsuite/ld-arm/arm-elf.exp: Run it.
If a plugin has been loaded already, we should warn and return, instead
of adding it on the plugin list.
PR ld/20321
* plugin.c (plugin_opt_plugin): Warn and return if plugin has
been loaded already.
* testsuite/ld-plugin/lto.exp: Run PR ld/20321 test.
* testsuite/ld-plugin/pr20321.c: New file.
