bfd_hide_sym_by_version can't be used to check if a versioned symbol is
hidden. It has to be synced with _bfd_elf_link_assign_sym_version to
get the correct answer.
bfd/
PR ld/23194
* elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Don't
set eh->local_ref to 1 if a symbol is versioned and there is a
version script.
ld/
PR ld/23194
* testsuite/ld-i386/i386.exp: Run pr23194.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr23194.d: New file.
* testsuite/ld-i386/pr23194.map: Likewise.
* testsuite/ld-i386/pr23194.s: Likewise.
* testsuite/ld-x86-64/pr23194.d: Likewise.
* testsuite/ld-x86-64/pr23194.map: Likewise.
* testsuite/ld-x86-64/pr23194.s: Likewise.
Since the pr23189 test isn't Linux specific, run it for all targets.
* testsuite/ld-i386/i386.exp: Run pr23189 for all targets.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
bfd * Makefile.am: Add s12z files.
* Makefile.in: Regenerate.
* archures.c: Add bfd_s12z_arch.
* bfd-in.h: Add exports of bfd_putb24 and bfd_putl24.
* bfd-in2.h: Regenerate.
* config.bfd: Add s12z target.
* configure.ac: Add s12z target.
* configure: Regenerate.
* cpu-s12z.c: New file.
* elf32-s12z.c: New file.
* libbfd.c (bfd_putb24): New function.
(bfd_putl24): New function.
* libbfd.h: Regenerate.
* reloc.c: Add s12z relocations.
(bfd_get_reloc_size): Handle size 5 relocs.
* targets.c: Add s12z_elf32_vec.
opcodes * Makefile.am: Add support for s12z architecture.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* s12z-dis.c: New file.
* s12z.h: New file.
include * elf/s12z.h: New header.
ld * Makefile.am: Add support for s12z architecture.
* configure.tgt: Likewise.
* Makefile.in: Regenerate.
* emulparams/m9s12zelf.sh: New file.
* scripttempl/elfm9s12z.sc: New file.
* testsuite/ld-discard/static.d: Expect to fail for the s12z
target.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr14926.d: Skip for the s12z target.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-s12z: New directory.
* testsuite/ld-s12z/opr-linking.d: New file.
* testsuite/ld-s12z/opr-linking.s: New file.
* testsuite/ld-s12z/relative-linking.d: New file.
* testsuite/ld-s12z/relative-linking.s: New file.
* testsuite/ld-s12z/z12s.exp: New file.
gas * Makefile.am: Add support for s12z target.
* Makefile.in: Regenerate.
* NEWS: Mention the new support.
* config/tc-s12z.c: New file.
* config/tc-s12z.h: New file.
* configure.tgt: Add s12z support.
* doc/Makefile.am: Likewise.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add s12z documentation.
* doc/as.textinfo: Likewise.
* doc/c-s12z.texi: New file.
* testsuite/gas/s12z: New directory.
* testsuite/gas/s12z/abs.d: New file.
* testsuite/gas/s12z/abs.s: New file.
* testsuite/gas/s12z/adc-imm.d: New file.
* testsuite/gas/s12z/adc-imm.s: New file.
* testsuite/gas/s12z/adc-opr.d: New file.
* testsuite/gas/s12z/adc-opr.s: New file.
* testsuite/gas/s12z/add-imm.d: New file.
* testsuite/gas/s12z/add-imm.s: New file.
* testsuite/gas/s12z/add-opr.d: New file.
* testsuite/gas/s12z/add-opr.s: New file.
* testsuite/gas/s12z/and-imm.d: New file.
* testsuite/gas/s12z/and-imm.s: New file.
* testsuite/gas/s12z/and-opr.d: New file.
* testsuite/gas/s12z/and-opr.s: New file.
* testsuite/gas/s12z/and-or-cc.d: New file.
* testsuite/gas/s12z/and-or-cc.s: New file.
* testsuite/gas/s12z/bfext-special.d: New file.
* testsuite/gas/s12z/bfext-special.s: New file.
* testsuite/gas/s12z/bfext.d: New file.
* testsuite/gas/s12z/bfext.s: New file.
* testsuite/gas/s12z/bit-manip.d: New file.
* testsuite/gas/s12z/bit-manip.s: New file.
* testsuite/gas/s12z/bit.d: New file.
* testsuite/gas/s12z/bit.s: New file.
* testsuite/gas/s12z/bra-expression-defined.d: New file.
* testsuite/gas/s12z/bra-expression-defined.s: New file.
* testsuite/gas/s12z/bra-expression-undef.d: New file.
* testsuite/gas/s12z/bra-expression-undef.s: New file.
* testsuite/gas/s12z/bra.d: New file.
* testsuite/gas/s12z/bra.s: New file.
* testsuite/gas/s12z/brclr-symbols.d: New file.
* testsuite/gas/s12z/brclr-symbols.s: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file.
* testsuite/gas/s12z/clb.d: New file.
* testsuite/gas/s12z/clb.s: New file.
* testsuite/gas/s12z/clr-opr.d: New file.
* testsuite/gas/s12z/clr-opr.s: New file.
* testsuite/gas/s12z/clr.d: New file.
* testsuite/gas/s12z/clr.s: New file.
* testsuite/gas/s12z/cmp-imm.d: New file.
* testsuite/gas/s12z/cmp-imm.s: New file.
* testsuite/gas/s12z/cmp-opr-inc.d: New file.
* testsuite/gas/s12z/cmp-opr-inc.s: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.s: New file.
* testsuite/gas/s12z/cmp-opr-reg.d: New file.
* testsuite/gas/s12z/cmp-opr-reg.s: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.s: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.d: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.s: New file.
* testsuite/gas/s12z/cmp-opr-xys.d: New file.
* testsuite/gas/s12z/cmp-opr-xys.s: New file.
* testsuite/gas/s12z/cmp-s-imm.d: New file.
* testsuite/gas/s12z/cmp-s-imm.s: New file.
* testsuite/gas/s12z/cmp-s-opr.d: New file.
* testsuite/gas/s12z/cmp-s-opr.s: New file.
* testsuite/gas/s12z/cmp-xy.d: New file.
* testsuite/gas/s12z/cmp-xy.s: New file.
* testsuite/gas/s12z/com-opr.d: New file.
* testsuite/gas/s12z/com-opr.s: New file.
* testsuite/gas/s12z/complex-shifts.d: New file.
* testsuite/gas/s12z/complex-shifts.s: New file.
* testsuite/gas/s12z/db-tb-cc-opr.d: New file.
* testsuite/gas/s12z/db-tb-cc-opr.s: New file.
* testsuite/gas/s12z/db-tb-cc-reg.d: New file.
* testsuite/gas/s12z/db-tb-cc-reg.s: New file.
* testsuite/gas/s12z/dbCC.d: New file.
* testsuite/gas/s12z/dbCC.s: New file.
* testsuite/gas/s12z/dec-opr.d: New file.
* testsuite/gas/s12z/dec-opr.s: New file.
* testsuite/gas/s12z/dec.d: New file.
* testsuite/gas/s12z/dec.s: New file.
* testsuite/gas/s12z/div.d: New file.
* testsuite/gas/s12z/div.s: New file.
* testsuite/gas/s12z/eor.d: New file.
* testsuite/gas/s12z/eor.s: New file.
* testsuite/gas/s12z/exg.d: New file.
* testsuite/gas/s12z/exg.s: New file.
* testsuite/gas/s12z/ext24-ld-xy.d: New file.
* testsuite/gas/s12z/ext24-ld-xy.s: New file.
* testsuite/gas/s12z/inc-opr.d: New file.
* testsuite/gas/s12z/inc-opr.s: New file.
* testsuite/gas/s12z/inc.d: New file.
* testsuite/gas/s12z/inc.s: New file.
* testsuite/gas/s12z/inh.d: New file.
* testsuite/gas/s12z/inh.s: New file.
* testsuite/gas/s12z/jmp.d: New file.
* testsuite/gas/s12z/jmp.s: New file.
* testsuite/gas/s12z/jsr.d: New file.
* testsuite/gas/s12z/jsr.s: New file.
* testsuite/gas/s12z/ld-imm-page2.d: New file.
* testsuite/gas/s12z/ld-imm-page2.s: New file.
* testsuite/gas/s12z/ld-imm.d: New file.
* testsuite/gas/s12z/ld-imm.s: New file.
* testsuite/gas/s12z/ld-immu18.d: New file.
* testsuite/gas/s12z/ld-immu18.s: New file.
* testsuite/gas/s12z/ld-large-direct.d: New file.
* testsuite/gas/s12z/ld-large-direct.s: New file.
* testsuite/gas/s12z/ld-opr.d: New file.
* testsuite/gas/s12z/ld-opr.s: New file.
* testsuite/gas/s12z/ld-s-opr.d: New file.
* testsuite/gas/s12z/ld-s-opr.s: New file.
* testsuite/gas/s12z/ld-small-direct.d: New file.
* testsuite/gas/s12z/ld-small-direct.s: New file.
* testsuite/gas/s12z/lea-immu18.d: New file.
* testsuite/gas/s12z/lea-immu18.s: New file.
* testsuite/gas/s12z/lea.d: New file.
* testsuite/gas/s12z/lea.s: New file.
* testsuite/gas/s12z/mac.d: New file.
* testsuite/gas/s12z/mac.s: New file.
* testsuite/gas/s12z/min-max.d: New file.
* testsuite/gas/s12z/min-max.s: New file.
* testsuite/gas/s12z/mod.d: New file.
* testsuite/gas/s12z/mod.s: New file.
* testsuite/gas/s12z/mov.d: New file.
* testsuite/gas/s12z/mov.s: New file.
* testsuite/gas/s12z/mul-imm.d: New file.
* testsuite/gas/s12z/mul-imm.s: New file.
* testsuite/gas/s12z/mul-opr-opr.d: New file.
* testsuite/gas/s12z/mul-opr-opr.s: New file.
* testsuite/gas/s12z/mul-opr.d: New file.
* testsuite/gas/s12z/mul-opr.s: New file.
* testsuite/gas/s12z/mul-reg.d: New file.
* testsuite/gas/s12z/mul-reg.s: New file.
* testsuite/gas/s12z/mul.d: New file.
* testsuite/gas/s12z/mul.s: New file.
* testsuite/gas/s12z/neg-opr.d: New file.
* testsuite/gas/s12z/neg-opr.s: New file.
* testsuite/gas/s12z/not-so-simple-shifts.d: New file.
* testsuite/gas/s12z/not-so-simple-shifts.s: New file.
* testsuite/gas/s12z/opr-18u.d: New file.
* testsuite/gas/s12z/opr-18u.s: New file.
* testsuite/gas/s12z/opr-expr.d: New file.
* testsuite/gas/s12z/opr-expr.s: New file.
* testsuite/gas/s12z/opr-ext-18.d: New file.
* testsuite/gas/s12z/opr-ext-18.s: New file.
* testsuite/gas/s12z/opr-idx-24-reg.d: New file.
* testsuite/gas/s12z/opr-idx-24-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-reg.d: New file.
* testsuite/gas/s12z/opr-idx3-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.d: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.s: New file.
* testsuite/gas/s12z/opr-indirect-expr.d: New file.
* testsuite/gas/s12z/opr-indirect-expr.s: New file.
* testsuite/gas/s12z/opr-symbol.d: New file.
* testsuite/gas/s12z/opr-symbol.s: New file.
* testsuite/gas/s12z/or-imm.d: New file.
* testsuite/gas/s12z/or-imm.s: New file.
* testsuite/gas/s12z/or-opr.d: New file.
* testsuite/gas/s12z/or-opr.s: New file.
* testsuite/gas/s12z/p2-mul.d: New file.
* testsuite/gas/s12z/p2-mul.s: New file.
* testsuite/gas/s12z/page2-inh.d: New file.
* testsuite/gas/s12z/page2-inh.s: New file.
* testsuite/gas/s12z/psh-pul.d: New file.
* testsuite/gas/s12z/psh-pul.s: New file.
* testsuite/gas/s12z/qmul.d: New file.
* testsuite/gas/s12z/qmul.s: New file.
* testsuite/gas/s12z/rotate.d: New file.
* testsuite/gas/s12z/rotate.s: New file.
* testsuite/gas/s12z/s12z.exp: New file.
* testsuite/gas/s12z/sat.d: New file.
* testsuite/gas/s12z/sat.s: New file.
* testsuite/gas/s12z/sbc-imm.d: New file.
* testsuite/gas/s12z/sbc-imm.s: New file.
* testsuite/gas/s12z/sbc-opr.d: New file.
* testsuite/gas/s12z/sbc-opr.s: New file.
* testsuite/gas/s12z/shift.d: New file.
* testsuite/gas/s12z/shift.s: New file.
* testsuite/gas/s12z/simple-shift.d: New file.
* testsuite/gas/s12z/simple-shift.s: New file.
* testsuite/gas/s12z/single-ops.d: New file.
* testsuite/gas/s12z/single-ops.s: New file.
* testsuite/gas/s12z/specd6.d: New file.
* testsuite/gas/s12z/specd6.s: New file.
* testsuite/gas/s12z/st-large-direct.d: New file.
* testsuite/gas/s12z/st-large-direct.s: New file.
* testsuite/gas/s12z/st-opr.d: New file.
* testsuite/gas/s12z/st-opr.s: New file.
* testsuite/gas/s12z/st-s-opr.d: New file.
* testsuite/gas/s12z/st-s-opr.s: New file.
* testsuite/gas/s12z/st-small-direct.d: New file.
* testsuite/gas/s12z/st-small-direct.s: New file.
* testsuite/gas/s12z/st-xy.d: New file.
* testsuite/gas/s12z/st-xy.s: New file.
* testsuite/gas/s12z/sub-imm.d: New file.
* testsuite/gas/s12z/sub-imm.s: New file.
* testsuite/gas/s12z/sub-opr.d: New file.
* testsuite/gas/s12z/sub-opr.s: New file.
* testsuite/gas/s12z/tfr.d: New file.
* testsuite/gas/s12z/tfr.s: New file.
* testsuite/gas/s12z/trap.d: New file.
* testsuite/gas/s12z/trap.s: New file.
binutils* readelf.c: Add support for s12z architecture.
* testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z
targets.
Since symbols created by HIDDEN and PROVIDE_HIDDEN assignments in
linker script may be marked as defined, but not hidden, we can't
set eh->local_ref to 1 in _bfd_x86_elf_link_symbol_references_local.
Also R_386_GOT32X should be handled as just like R_386_GOT32 when
relocating a section. The input R_386_GOT32X relocations, which
can be relaxed, should have been converted to R_386_PC32, R_386_32
or R_386_GOTOFF.
bfd/
PR ld/23189
* elf32-i386.c (elf_i386_relocate_section): Handle R_386_GOT32X
like R_386_GOT32.
* elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Don't
set eh->local_ref to 1 for linker defined symbols.
ld/
PR ld/23189
* testsuite/ld-i386/i386.exp: Run pr23189.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr23189.d: New file.
* testsuite/ld-i386/pr23189.s: Likewise.
* testsuite/ld-i386/pr23189.t: Likewise.
* testsuite/ld-x86-64/pr23189.d: Likewise.
* testsuite/ld-x86-64/pr23189.s: Likewise.
* testsuite/ld-x86-64/pr23189.t: Likewise.
gas * write.c (maybe_generate_build_notes): Generate notes on a
per-code-section basis. Skip linkonce sections.
ld * testsuite/ld-elf/notes.exp: New file: Run new test.
* testsuite/ld-elf/note1_1.s: New file: Source file for test.
* testsuite/ld-elf/note1_2.s: New file: Source file for test.
* testsuite/ld-elf/note1.r: New file: Expected readelf output.
If IFUNC symbol is defined in position-dependent executable, we should
change it to the normal function and set its address to its PLT entry
which should be resolved by R_*_IRELATIVE at run-time. All external
references should be resolved to its PLT in executable.
bfd/
PR ld/23169
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Don't issue
an error on IFUNC pointer defined in PDE.
* elf32-i386.c (elf_i386_finish_dynamic_symbol): Call
_bfd_x86_elf_link_fixup_ifunc_symbol.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Likewise.
* elfxx-x86.c (_bfd_x86_elf_link_fixup_ifunc_symbol): New
function.
* elfxx-x86.h (_bfd_x86_elf_link_fixup_ifunc_symbol): New.
ld/
PR ld/23169
* testsuite/ld-ifunc/ifunc-9-i386.d: New file.
* testsuite/ld-ifunc/ifunc-9-x86-64.d: Likewise.
* testsuite/ld-ifunc/pr23169a.c: Likewise.
* testsuite/ld-ifunc/pr23169a.rd: Likewise.
* testsuite/ld-ifunc/pr23169b.c: Likewise.
* testsuite/ld-ifunc/pr23169b.c: Likewise.
* testsuite/ld-ifunc/pr23169c.rd: Likewise.
* testsuite/ld-ifunc/pr23169c.rd: Likewise.
* testsuite/ld-ifunc/ifunc-9-x86.d: Removed.
* testsuite/ld-ifunc/ifunc.exp: Run PR ld/23169 tests.
__bss_start, _end and _edata are defined by linker to mark regions
within executables and shared libraries. All references within
executables should be locally resolved.
This patch doesn't change how their references within shared libraries
are resolved.
bfd/
PR ld/23162
* elfxx-x86.c (elf_x86_linker_defined): New function.
(_bfd_x86_elf_link_check_relocs): Use it to mark __bss_start,
_end and _edata locally defined within executables.
ld/
PR ld/23162
* testsuite/ld-elf/pr23162.map: New file.
* testsuite/ld-elf/pr23162.rd: Likewise.
* testsuite/ld-elf/pr23162a.c: Likewise.
* testsuite/ld-elf/pr23162b.c: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/23162 tests.
Sections may well belong in multiple segments. The testcase in the PR
saw an allocated section being assigned to an ABIFLAGS segment, then
not being assigned to a LOAD segment because it had already been
handled. To fix that particular problem this patch sets and tests
segment_mark only for LOAD segments. I kept the segment_mark test for
LOAD segments because I think there may otherwise be a problem with
zero size sections.
A few other problems showed up with the testcase. Some targets align
.dynamic, resulting in the test failing with "section .dynamic lma
0x800000c0 adjusted to 0x800000cc" and similar messages. I've tried
to handle that with some more hacks to the segment lma, which do the
right thing for the testcase, but may well fail in other situations.
I've also removed the tests of segment lma (p_paddr) and code involved
in deciding that an adjusted segment no longer covers the file or
program headers. Those test can't be correct in the face of objcopy
--change-section-lma. It may be necessary to reinstate the tests but
do them modulo page size, but we'll see how this goes.
PR 20659
bfd/
* elf.c (rewrite_elf_program_header): Use segment_mark only for
PT_LOAD headers. Delete first_matching_lma and first_suggested_lma.
Instead make matching_lma and suggested_lma pointers to the
sections. Align section vma and lma calculated from segment.
Don't clear includes_phdrs or includes_filehdr based on p_paddr
test. Try to handle alignment padding before first section by
adjusting new segment lma down. Adjust PT_PHDR map p_paddr.
ld/
* testsuite/ld-elf/changelma.d,
* testsuite/ld-elf/changelma.lnk,
* testsuite/ld-elf/changelma.s: New test.
My original implementation for LDI32 pseudo does not conform to
the TI ABI. I wrongly documented my TI PRU ELF object files inspection,
which got propagated into my binutils implementation.
Issue was exposed when running the GCC ABI testsuite against TI toolchain.
According to TI ABI, LDI32 must use first LDI instruction to load
the MSB 16bits, and second LDI instruction for the LSB 16bits.
This patch will break binary compatibility with previously released
binutils versions for PRU. Still, I think it is better to fix
binutils to conform to the chip vendor ABI.
bfd * elf32-pru.c (pru_elf32_do_ldi32_relocate): Make LDI32 relocation
conformant to TI ABI.
(pru_elf32_relax_section): Likewise.
(pru_elf_relax_delete_bytes): Fix offsets for new LDI32 code.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Ignore addend.
(pru_elf32_pmem_relocate): Trap - should not get here.
(pru_elf32_relocate_section): Add support for REL relocations.
(elf_info_to_howto_rel): Enable REL.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
gas * config/tc-pru.c (md_apply_fix): Make LDI32 relocation conformant
to TI ABI.
(pru_assemble_arg_i): Likewise.
(output_insn_ldi32): Likewise.
* testsuite/gas/pru/ldi.d: Update test for the now fixed LDI32.
* gas/config/tc-pru.c (pru_assemble_arg_b): Check imm8 operand range.
* gas/testsuite/gas/pru/illegal2.l: New test.
* gas/testsuite/gas/pru/illegal2.s: New test.
* gas/testsuite/gas/pru/pru.exp: Register new illegal2 test.
ld * scripttempl/pru.sc: Add LD sections to allow linking TI
toolchain object files.
* scripttempl/pru.sc: Switch to init_array.
* testsuite/ld-pru/ldi32.d: Update LDI32 test to conform to TI ABI.
* testsuite/ld-pru/norelax_ldi32-data.d: Likewise.
* testsuite/ld-pru/norelax_ldi32-dis.d: Likewise.
* testsuite/ld-pru/relax_ldi32-data.d: Likewise.
* testsuite/ld-pru/relax_ldi32-dis.d: Likewise.
The _gp_disp is a magic symbol, always implicitly defined by the linker.
It does not make a sense to write it into symbol tables for output files.
Moreover, now if the linker gets a version script, the _gp_disp symbol
gets zero version definition index. The zero index means[1]:
"The symbol is local, not available outside the object."
But the _gp_disp symbol has GLOBAL binding. That confuses some tools
like for example the LLD linker when they get such files as inputs.
This patch fixes the problem - it prevents writing the _gp_disp symbol
in regular and dynamic symbol tables.
This was tested by running LD test suite on a mipsel-linux board.
References:
[1] "Linux Standard Base Specification", Section "10.7.2 Symbol
Version Table", p. 32
2018-05-03 Simon Atanasyan <simon@atanasyan.com>
bfd/
* elf32-mips.c: (elf32_mips_fixup_symbol): New function.
(elf_backend_fixup_symbol): New macro.
* elfxx-mips.c: (mips_elf_output_extsym): Discard _gp_disp
handling.
(_bfd_mips_elf_finish_dynamic_symbol): Likewise.
ld/
* testsuite/ld-mips-elf/gp-disp-sym.d: New test.
* testsuite/ld-mips-elf/gp-disp-sym.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
* testsuite/ld-mips-elf/mips16-pic-2.ad: Update for _gp_disp
symbol removal.
* testsuite/ld-mips-elf/mips16-pic-2.nd: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-3a.dd: Likewise.
* testsuite/ld-mips-elf/tlslib-o32-hidden.got: Likewise.
* testsuite/ld-mips-elf/tlslib-o32-ver.got: Likewise.
* testsuite/ld-mips-elf/tlslib-o32.got: Likewise.
Mark these `run_dump_test' cases across `ld-mips-elf/mips-elf.exp' that
are run unconditionally and require shared library support for exclusion
for targets that do not have such support, removing these failures:
FAIL: MIPS BAL/JALX in PIC mode
FAIL: microMIPS BAL/JALX in PIC mode
FAIL: MIPS BAL/JALX in PIC mode (ignore branch ISA)
FAIL: microMIPS BAL/JALX in PIC mode (ignore branch ISA)
FAIL: ld-mips-elf/hash1a
FAIL: ld-mips-elf/hash1b
FAIL: ld-mips-elf/hash1c
with `mipsel-ps2-elf' and `mips64el-ps2-elf' targets. Tests that are
guarded with `linux_gnu' will have to be reviewed separately.
ld/
* testsuite/ld-mips-elf/bal-jalx-pic.d: Only run for
`check_shared_lib_support' targets.
* testsuite/ld-mips-elf/bal-jalx-pic-n32.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-n64.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n32.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n64.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips.d:
Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n32.d:
Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n64.d:
Likewise.
* testsuite/ld-mips-elf/hash1a.d: Likewise.
* testsuite/ld-mips-elf/hash1b.d: Likewise.
* testsuite/ld-mips-elf/hash1c.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n32-shared.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n64-shared.d: Likewise.
Implement a more complex way of selecting targets to include or exclude
with `run_dump_test' cases, by extending the syntax for the `target',
`not-target', `skip' and `not-skip' options (with the binutils and GAS
test suites) and the `target', `alltargets' and `notarget' options (with
the LD test suite) to also accept a name of a TCL procedure instead of a
target triplet glob matching expression. The result, 1 or 0, of the
procedure determines whether the test is to be run or not. This mimics
and expands `dg-require-effective-target' from the GCC test suite.
Names of TCL procedures are supplied in square brackets `[]' as with TCL
procedure calls, observing that target triplet glob matching expressions
do not normally start and end with matching square brackets both at a
time. Arguments for procedures are allowed if required.
Having a way to specify a complex condition for a `run_dump_test' case
to run has the advantage of keeping it local within the test case itself
where tool options related to the check might be also present, removing
the need to wrap `run_dump_test' calls into an `if' block whose only
reason is to do a feature check, and ultimately lets one have the test
reported as UNSUPPORTED automagically if required (not currently
supported by the `run_dump_test' options used for LD).
binutils/
* testsuite/lib/binutils-common.exp (match_target): New procedure.
* testsuite/lib/utils-lib.exp (run_dump_test): Use it in place
of `istarget' for matching with `target', `not-target', `skip'
and `not-skip' options.
gas/
* testsuite/lib/gas-defs.exp (run_dump_test): Use `match_target'
in place of `istarget' for matching with `target', `not-target',
`skip' and `not-skip' options.
ld/
* testsuite/lib/ld-lib.exp (run_dump_test): Use `match_target'
in place of `istarget' for matching with `target', `alltargets'
and `notarget' options.
Define and handle TLS relocations for FDPIC in BFD and gas.
In gas, the new relocations are rejected if the --fdpic option was not
specified.
We also define the __tdata_start symbol to mark the start of the
.tdata section. This allows FDPIC static binaries to find the start of
.tdata section, since phdr->p_vaddr of TLS segment is not a valid
value for FDPIC.
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
bfd/:
* bfd-in2.h (BFD_RELOC_ARM_TLS_GD32_FDPIC)
(BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC): New
relocations.
* elf32-arm.c (elf32_arm_howto_table_2): Add R_ARM_TLS_GD32_FDPIC,
R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC relocations.
(elf32_arm_reloc_map): Add R_ARM_TLS_GD32_FDPIC,
R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC.
(struct elf32_arm_link_hash_table): Update comment.
(elf32_arm_final_link_relocate): Handle TLS FDPIC relocations.
(IS_ARM_TLS_RELOC): Likewise.
(elf32_arm_check_relocs): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_size_dynamic_sections): Update comment.
* reloc.c: Add BFD_RELOC_ARM_TLS_GD32_FDPIC,
BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC.
gas/
* config/tc-arm.c (reloc_names): Add TLSGD_FDPIC, TLSLDM_FDPIC,
GOTTPOFF_FDIC relocations.
(md_apply_fix): Handle the new TLS FDPIC relocations.
(tc_gen_reloc): Likewise.
(arm_fix_adjustable): Likewise.
include/
* elf/arm.h: Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC,
R_ARM_TLS_IE32_FDPIC.
ld/
* scripttempl/elf.sc: Define __tdata_start for .tdata section.
gcc configured using --with-ld always uses that particular version of
ld if it exists. This patch adds a check that the ld version reported
directly from ld-new matches that reported via gcc. I chose to
compare the ld --version output rather than a more strict test (for
example by gcc --print-prog-name=ld), because the version test allows
a user to run the ld testsuite after installing a new ld (in the place
expected by gcc).
Sample output:
Running target unix
Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target.
Using /usr/share/dejagnu/config/unix.exp as generic interface file for target.
Using /home/alan/src/binutils-gdb/ld/testsuite/config/default.exp as tool-and-target-specific interface file.
ERROR: ************************************************************************
ERROR: Your compiler driver ignores -B when choosing ld.
ERROR: You will not be testing the new ld in many of the following tests.
ERROR: It seems you will be testing /usr/bin/x86_64-w64-mingw32-ld instead.
ERROR: ************************************************************************
WARNING: Assuming target board is the local machine (which is probably wrong).
You may need to set your DEJAGNU environment variable.
Running /home/alan/src/binutils-gdb/ld/testsuite/ld-aarch64/aarch64-elf.exp ...
* testsuite/lib/ld-lib.exp (run_host_cmd): Check that gcc -B
works.
Andrew Sadek <andrew.sadek.se@gmail.com>
A new implemented feature in GCC Microblaze that allows Position
Independent Code to run using Data Text Relative addressing instead
of using Global Offset Table.
Its aim was to make 'PIC' more efficient and flexible as elf size
excess performance overhead were noticed when using GOT due to the
indirect addressing.
include/ChangeLog:
* bfdlink.h (Add flag): Add new flag @ 'bfd_link_info' struct.
* elf/microblaze.h (Add 3 new relocations):
R_MICROBLAZE_TEXTPCREL_64, R_MICROBLAZE_TEXTREL_64
and R_MICROBLAZE_TEXTREL_32_LO for relax function.
bfd/ChangeLog:
* bfd/reloc.c (2 new BFD relocations):
BFD_RELOC_MICROBLAZE_64_TEXTPCREL &
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
* bfd/bfd-in2.h: Regenerate
* bfd/libbfd.h: Regenerate
* bfd/elf32-microblaze.c (Handle new relocs): define 'HOWTO' of 3
new relocs and handle them in both relocate and relax functions.
(microblaze_elf_reloc_type_lookup): add mapping between for new
bfd relocs.
(microblaze_elf_relocate_section): Handle new relocs in case of
elf relocation.
(microblaze_elf_relax_section): Handle new relocs for elf relaxation.
gas/ChangeLog:
* gas/config/tc-microblaze.c (Handle new relocs directives in
assembler): Handle new relocs from compiler output.
(imm_types): add new imm types for data text relative addressing
TEXT_OFFSET, TEXT_PC_OFFSET
(md_convert_frag): conversion for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_apply_fix): apply fix for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_estimate_size_before_relax): estimate size for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(tc_gen_reloc): generate relocations for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
ld/ChangeLog:
* ld/lexsup.c (Add 2 ld options):
(ld_options): add disable-multiple-abs-defs @ 'ld_options' array
(parse_args): parse new option and pass flag to 'link_info' struct.
* ld/ldlex.h (Add enum): add new enum @ 'option_values' enum.
* ld/ld.texinfo (Add new option): Add description for
'disable-multiple-abs-defs'
* ld/main.c: Initialize flags with false @ 'main'. Handle
disable-multiple-abs-defs @ 'mutiple_definition'.
max-page-size only matters for demand paged executables or shared
libraries, and the ideal size is the largest value used by your
operating system. Values larger than necessary just waste file space
and memory. common-page-size also affects file and memory size,
trading a possible small increase in file size for a decrease in
memory size when the operating system is using a common-page-size
page. With a powerpc max-page-size of 64k and common-page-size of 4k
many executables will use no more memory pages when the system page
size is 4k than an executable linked with -z max-page-size=0x1000,
yet will still run on a system using 64k pages. However, when running
on a system using 64k pages relro protection will not be completely
effective.
Due to the relro problem, powerpc binutils has been using a default
common-page-size of 64k since 2014-12-18 (git commit 04c6a44c7),
leading to complaints about increased file and memory sizes. People
not using relro do have a valid reason to complain..
So this patch introduces an extra back-end value to use as the default
for common-page-size when generating relro executables, and enables
the support for powerpc. Non relro executables will now be generated
with a default common-page-size of 4k.
bfd/
* elf-bfd.h (struct elf_backend_data): Add relropagesize.
* elfxx-target.h (ELF_RELROPAGESIZE): Provide default and
sanity test.
(elfNN_bed): Init relropagesize.
* bfd.c (bfd_emul_get_commonpagesize): Add boolean param to
select relropagesize.
* elf32-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
(ELF_MINPAGESIZE): Don't define.
* elf64-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
* bfd-in2.h: Regenerate.
ld/
* ldmain.c (main): Move config.maxpagesize and
config.commonpagesize initialization to..
* ldemul.c (after_parse_default): ..here.
* testsuite/ld-powerpc/ppc476-shared.d: Pass -z common-page-size.
* testsuite/ld-powerpc/ppc476-shared2.d: Likewise.
Enabling shared lib tests showed the powerpc-lynxos target is broken,
and has been for a long time. The breakage happened in a 2005-05-07
patch of mine, git commit 3b36f7e62, I think. There have been no bug
reports I recall so it seems the target is dead. powerpc-windiss is
similarly broken.
This patch fixes the breakage, and puts the targets on the obsolete
list.
bfd/
* config.bfd: Add powerpc-*-lynxos* and powerpc-*-windiss*
to obsolete list.
ld/
* emulparams/elf32ppcwindiss.sh: Rewrite to use elf32ppc.sh.
* emulparams/ppclynx.sh: Likewise.
H.J. Lu
John Darrington
Alan Modra
Nick Clifton
Dimitar Dimitrov
Jim Wilson
Simon Atanasyan
Maciej W. Rozycki
Christophe Lyon
Christophe Lyon
Michael Eager