Following the addition of the --language optiton to all GDB/MI
commands, I realized that there was no easy way for front-ends
to figure out whether this features is available or not. So I added
a "language-option" entry to -list-features.
gdb/ChangeLog:
* mi/mi-main.c (mi_cmd_list_features): Add "language-options"
to -list-features output.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Miscellaneous Commands): Document the new
"language-option" entry in the output of the "-list-features"
command.
This is to help make it slightly clearer how this method is expected
to extract data from the given register.
gdb/ChangeLog:
* dwarf2expr.h (struct dwarf_expr_context_funcs)
<read_addr_from_reg>: Renames "read_reg".
* dwarf2-frame.c (read_addr_from_reg): Renames "read_reg".
Adjust comment.
(dwarf2_frame_ctx_funcs, execute_stack_op, dwarf2_frame_cache):
Use read_addr_from_reg in place of read_reg.
* dwarf2expr.c (execute_stack_op): Use read_addr_from_reg
in place of read_reg.
* dwarf2loc.c (dwarf_expr_read_addr_from_reg): Renames
dwarf_expr_read_reg.
(dwarf_expr_ctx_funcs): Replace dwarf_expr_read_reg
with dwarf_expr_read_addr_from_reg.
(needs_frame_read_addr_from_reg): Renames needs_frame_read_reg.
(needs_frame_ctx_funcs): Replace needs_frame_read_reg with
needs_frame_read_addr_from_reg.
In the case where the GNAT runtime was built with full debugging info,
several of the exceptions defined there might have a name contain
the word "global". To make this less likely, this patch renames
the exception name, replacing "Global" by "Global_GDB". It still
keeps the exeption name relatively short, while it is unlikely that
the GNAT runtime has an exception whose name explicitly mentions GDB,
and even less likely that it contains "Global_GDB".
gdb/testsuite/ChangeLog:
* info_exc/const.ads (Aint_Global_GDB_E): Renames Aint_Global_E.
* info_exc/foo.adb: Adjust to new exception name.
* info_exc.exp: Adjust after exception renaming in const.ads.
Update "info exception global" test to test "info exceptions
global_gdb" instead.
* mi_exc_info/const.ads (Aint_Global_GDB_E): Renames Aint_Global_E.
* mi_exc_info/foo.adb (Adjust to new exception name.
* mi_exc_info.exp: Adjust after exception renaming in const.ads.
Update "-info-ada-exceptions global" test to test
"-info-ada-exceptions global_gdb" instead.
* config/tc-aarch64.c (set_other_error): New function.
(parse_sys_reg): Add new parameter 'sys_reg' and if non-NULL set
the variable to which it points with 'o'.
(parse_operands): Update; check for write to read-only system
registers or read from write-only ones.
gas/testsuite/
* gas/aarch64/diagnostic.s: Add tests.
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/tracereg-illegal.d: New file.
* gas/aarch64/tracereg-illegal.l: Ditto.
* gas/aarch64/tracereg-illegal.s: Ditto.
* gas/aarch64/tracereg.d: Ditto.
* gas/aarch64/tracereg.s: Ditto.
include/opcode
* aarch64.h (aarch64_sys_reg_readonly_p): New declaration.
(aarch64_sys_reg_writeonly_p): Ditto.
opcodes/
* aarch64-opc.c (CPENT): New define.
(F_READONLY, F_WRITEONLY): Likewise.
(aarch64_sys_regs): Add trace unit registers.
(aarch64_sys_reg_readonly_p): New function.
(aarch64_sys_reg_writeonly_p): Ditto.
of inferior output for remote and native sessions.
* gdb.mi/mi-console.exp: Remove obsolete comment.
Check for semihosted inferior output pattern.
(semihosted_string): New function.
If the runtime has full debug info, then the non-standard exceptions
declared in the GNAT runtime will appear in the list of exceptions
printed by GDB ("info exceptions" or "-info-ada-exceptions").
This is valid output, so this patch allows for it.
gdb/testsuite/ChangeLog:
* gdb.ada/info_exc.exp: Allow other global exceptions to be
listed in the output of "info exceptions".
* gdb.ada/mi_exc_info.exp: Allow other global exceptions to be
listed in the output of "-info-ada-exceptions".
Similar to qsort(), the glibc version of memcpy() also declares its
arguments with __attribute__(__nonnull__(...)). If NULL is passed
anyway, upstream GCC's new pass '-fisolate-erroneous-paths' typically
causes a trap in such cases. I've encountered this with GDB in
chain_candidate() when trying to execute the break.exp test case.
gdb/
2013-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* dwarf2loc.c (chain_candidate): Prevent invoking memcpy with
NULL.
This patch fixes some spurious failures when the inferior is linked
against the shared version of libgnat by default, as appears to be
the case on many GNU/Linux distributions. When that happens, we have
to start the program in order to ensure that the GNAT runtime is
mapped to memory, in order for us to find the standard exceptions
(defined within the runtime). Otherwise, they will not be shown,
as expected, by the debugger.
gdb/testsuite/ChangeLog:
* gdb.ada/info_exc.exp: Start inferior before starting
the "info exceptions" tests.
* gdb.ada/mi_exc_info.exp: Start inferior before starting
the "-info-ada-exceptions" tests.
This patch fixes PR c++/16117.
gdb has an extension so that users can use expressions like FILE::NAME
to choose a variable of the given name from the given file. The bug
is that this extension takes precedence over ordinary C++ expressions
of the same form. You might think this is merely hypothetical, but
now that C++ headers commonly do not use an extension, it is more
common.
This patch fixes the bug by making two related changes. First, it
changes gdb to prefer the ordinary C++ meaning of a symbol over the
extended meaning. Second, it arranges for single-quoting of the
symbol to indicate a preference for the extension.
Built and regtested on x86-64 Fedora 18.
New test case included.
2013-11-15 Tom Tromey <tromey@redhat.com>
PR c++/16117:
* c-exp.y (lex_one_token): Add "is_quoted_name" argument.
(classify_name): Likewise. Prefer a field of "this" over a
filename.
(classify_inner_name, yylex): Update.
2013-11-15 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Variables): Note gdb rules for ambiguous cases.
Add example.
2013-11-15 Tom Tromey <tromey@redhat.com>
* gdb.cp/includefile: New file.
* gdb.cp/filename.exp: New file.
* gdb.cp/filename.cc: New file.
Consider the following code, compiled at -O2 on ppc-linux:
procedure Increment (Val : in out Float; Msg : String);
The implementation does not really matter in this case). In our example,
this function is being called from a function with Param_1 set to 99.0.
Trying to break inside that function, and running until reaching that
breakpoint yields:
(gdb) b increment
Breakpoint 1 at 0x100014b4: file callee.adb, line 6.
(gdb) run
Starting program: /[...]/foo
Breakpoint 1, callee.increment (val=99.0, val@entry=0.0, msg=...)
at callee.adb:6
6 if Val > 200.0 then
The @entry value for parameter "val" is incorrect, it should be 99.0.
The associated call-site parameter DIE looks like this:
.uleb128 0xc # (DIE (0x115) DW_TAG_GNU_call_site_parameter)
.byte 0x2 # DW_AT_location
.byte 0x90 # DW_OP_regx
.uleb128 0x21
.byte 0x3 # DW_AT_GNU_call_site_value
.byte 0xf5 # DW_OP_GNU_regval_type
.uleb128 0x3f
.uleb128 0x25
The DW_AT_GNU_call_site_value uses a DW_OP_GNU_regval_type
operation, referencing register 0x3f=63, which is $f31,
an 8-byte floating register. In that register, the value is
stored using the usual 8-byte float format:
(gdb) info float
f31 99.0 (raw 0x4058c00000000000)
The current code evaluating DW_OP_GNU_regval_type operations
currently is (dwarf2expr.c:execute_stack_op):
result = (ctx->funcs->read_reg) (ctx->baton, reg);
result_val = value_from_ulongest (address_type, result);
result_val = value_from_contents (type,
value_contents_all (result_val));
What the ctx->funcs->read_reg function does is read the contents
of the register as if it contained an address. The rest of the code
continues that assumption, thinking it's OK to then use that to
create an address/ulongest struct value, which we then re-type
to the type specified by DW_OP_GNU_regval_type.
We're getting 0.0 above because the read_reg implementations
end up treating the contents of the FP register as an integral,
reading only 4 out of the 8 bytes. Being a big-endian target,
we read the high-order ones, which gives us zero.
This patch fixes the problem by introducing a new callback to
read the contents of a register as a given type, and then adjust
the handling of DW_OP_GNU_regval_type to use that new callback.
gdb/ChangeLog:
* dwarf2expr.h (struct dwarf_expr_context_funcs) <read_reg>:
Extend the documentation a bit.
<get_reg_value>: New field.
* dwarf2loc.c (dwarf_expr_get_reg_value)
(needs_frame_get_reg_value): New functions.
(dwarf_expr_ctx_funcs, needs_frame_ctx_funcs): Add "get_reg_value"
callback.
* dwarf2-frame.c (get_reg_value): New function.
(dwarf2_frame_ctx_funcs): Add "get_reg_value" callback.
* dwarf2expr.c (execute_stack_op) <DW_OP_GNU_regval_type>:
Use new callback to compute result_val.
gdb/testsuite/ChangeLog:
* gdb.ada/O2_float_param: New testcase.
* powerpc.cc (Target_powerpc::glink_section): Provide non-const
accessor.
(Target_powerpc::Branch_info::make_stub): Make global entry stubs.
Only call ppc64_local_entry_offset for 64-bit. Restrict
symval_for_branch lookup to ELFv1.
(Stub_table::add_plt_call_entry): Use unsigned int off.
(Output_data_glink::Address, invalid_address): New.
(Output_data_glink::add_eh_frame): Move out of line. Add
support for ELFv2.
(Output_data_glink::add_global_entry, find_global_entry,
global_entry_address): New functions.
(Output_data_glink::global_entry_stubs_, end_branch_table_,
ge_size): New variables.
(Output_data_glink::set_final_data_size): Add global entry
stub sizing.
(Output_data_glink::do_write): Write global entry stubs.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Add target
parameter. Return true for ELFv2. Adjust callers.
(Target_powerpc::Scan::local, global): Restrict opd lookup to
ELFv1. Similarly for ifunc and dynamic relocation processing
specific to ELFv1. Recognize that symbols are defined on
their plt entries for ELFv2.
(Target_powerpc::symval_for_branch): Assert if called for
ELFv2 or ppc32.
(Target_powerpc::Relocate::relocate): Use global entry plt
stub for symbol value if such exists on ELFv2.
(Target_powerpc::Relocate::relocate): Don't call
symval_for_branch when ELFv2. Do adjust for local entry
offset when ELFv2.
(Target_powerpc::do_dynsym_value): Set symbols to global entry
plt stub for ELFv2.
(Target_powerpc::do_plt_address_for_global): Similarly.
ELFv2 needs different plt call stubs to ELFv1, register usage differs
too. When I added these to ld I changed register usage in the ELFv1
stubs as well, simplifying the linker code and (perhaps) future
maintenance. All well and good, but this means gdb needs to cope with
more stub variants. This patch also handles skipping over addis/addi
setting up r2 in ELFv2 global entry code. We want breakpoints to be
set past this point to catch calls via the local entry point.
* ppc64-tdep.c (ppc64_plt_entry_point): Renamed from..
(ppc64_desc_entry_point): ..this. Update comments here and at
call points.
(ppc64_standard_linkage1, ppc64_standard_linkage2,
ppc64_standard_linkage3): Update comments.
(ppc64_standard_linkage4, ppc64_standard_linkage5,
(ppc64_standard_linkage6, ppc64_standard_linkage7): New insn
patterns.
(ppc64_standard_linkage4_target): New function.
(ppc64_skip_trampoline_code): Skip ELFv2 patterns too.
* rs6000-tdep.c (skip_prologue): Skip ELFv2 r2 setup. Correct
nop match. Fix comment wrap.
Pedro pointed out that it is handy for "make check" to print a summary
of the results. This happens in the check-single case and also if you
invoke runtest by hand.
This patch implements the same thing for check-parallel.
2013-11-14 Tom Tromey <tromey@redhat.com>
* Makefile.in (check-parallel): Print summary from gdb.sum.
This patch fixes a buglet in the manual.
It's wrong to say that a method is defined "as" a subclass.
Instead it should say that a method is defined "in" a subclass.
I'm checking this in under the obvious rule.
2013-11-14 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Breakpoints In Python): Replace "as" with "in".
Before all this stop_soon handling, we have code that can end in
keep_going. Particularly, the thread_hop_needed code looked
suspicious considering breakpoint always-inserted mode, though on
closer inspection, it'd take connecting to multiple remote targets
that shared the same address space to trigger that.
Still, I think it's clearer if all this remote connection setup /
attach code is placed early, before any keep_going path could be
reached.
gdb/
2013-11-14 Pedro Alves <palves@redhat.com>
* infrun.c (handle_signal_stop): Move STOP_QUIETLY,
STOP_QUIETLY_REMOTE and 'stop_after_trap' handling earlier.
After the previous patches, we only ever reach the code after the
initial 'switch (ecs->ws.kind)' switch for TARGET_WAITKIND_STOPPED.
We can now factor out all that to its own function.
Unfortunately, stepped_after_stopped_by_watchpoint needed to move to
the ecs. I think that indicates a state machine bug -- no event other
than TARGET_WAITKIND_STOPPED indicates a single-step actually
finished. TARGET_WAITKIND_SYSCALL_XXX, TARGET_WAITKIND_FORK, etc. are
all events that are triggered from the kernel, _within_ a syscall,
IOW, from userspace's perspective, halfway through an instruction
being executed. This might actually matter for the syscall events, as
syscalls can change memory (and thus trigger watchpoints).
gdb/
2013-11-14 Pedro Alves <palves@redhat.com>
* infrun.c (struct execution_control_state)
<stepped_after_stopped_by_watchpoint>: New field.
(get_inferior_stop_soon): New function.
(handle_inferior_event): 'stepped_after_stopped_by_watchpoint' was
moved to struct execution_control_state -- adjust. Use
get_inferior_stop_soon. Split TARGET_WAITKIND_STOPPED handling to
new function.
(handle_signal_stop): New function, factored out from
handle_inferior_event.
After the previous patch, there's actually no breakpoint type that
returns BPSTAT_SIGNAL_HIDE, so we can go back to having
bpstat_explains_signal return a boolean. The signal hiding actually
disappears.
gdb/
2013-11-14 Pedro Alves <palves@redhat.com>
* break-catch-sig.c (signal_catchpoint_explains_signal): Adjust to
return a boolean.
* breakpoint.c (bpstat_explains_signal): Adjust to return a
boolean.
(explains_signal_watchpoint, base_breakpoint_explains_signal):
Adjust to return a boolean.
* breakpoint.h (enum bpstat_signal_value): Delete.
(struct breakpoint_ops) <explains_signal>: New returns a boolean.
(bpstat_explains_signal): Likewise.
* infrun.c (handle_inferior_event) <random signal checks>:
bpstat_explains_signal now returns a boolean - adjust. No longer
consider hiding signals.
Looking at the current random signal checks:
if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
random_signal
= !((bpstat_explains_signal (ecs->event_thread->control.stop_bpstat,
GDB_SIGNAL_TRAP)
!= BPSTAT_SIGNAL_NO)
|| stopped_by_watchpoint
|| ecs->event_thread->control.trap_expected
|| (ecs->event_thread->control.step_range_end
&& (ecs->event_thread->control.step_resume_breakpoint
== NULL)));
else
{
enum bpstat_signal_value sval;
sval = bpstat_explains_signal (ecs->event_thread->control.stop_bpstat,
ecs->event_thread->suspend.stop_signal);
random_signal = (sval == BPSTAT_SIGNAL_NO);
if (sval == BPSTAT_SIGNAL_HIDE)
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
}
We can observe:
- the stepping checks bit:
...
|| ecs->event_thread->control.trap_expected
|| (ecs->event_thread->control.step_range_end
&& (ecs->event_thread->control.step_resume_breakpoint
== NULL)));
...
is just like currently_stepping:
static int
currently_stepping (struct thread_info *tp)
{
return ((tp->control.step_range_end
&& tp->control.step_resume_breakpoint == NULL)
|| tp->control.trap_expected
|| bpstat_should_step ());
}
except it misses the bpstat_should_step check (***).
It's not really necessary to check bpstat_should_step in the
random signal tests, because software watchpoints always end up in
the bpstat list anyway, which means bpstat_explains_signal with
GDB_SIGNAL_TRAP always returns at least BPSSTAT_SIGNAL_HIDE, but I
think the code is clearer if we reuse currently_stepping.
*** - bpstat_should_step checks to see if there's any software
watchpoint in the breakpoint list, because we need to force the
target to single-step all the way, to evaluate the watchpoint's
value at each step.
- we never hide GDB_SIGNAL_TRAP, even if the bpstat returns
BPSTAT_SIGNAL_HIDE, which is actually the default for all
breakpoints. If we make the default be BPSTAT_SIGNAL_PASS, then
we can merge the two bpstat_explains_signal paths.
gdb/
2013-11-14 Pedro Alves <palves@redhat.com>
* breakpoint.c (bpstat_explains_signal) <Moribund locations>:
Return BPSTAT_SIGNAL_PASS instead of BPSTAT_SIGNAL_HIDE.
(explains_signal_watchpoint): Return BPSTAT_SIGNAL_PASS instead of
BPSTAT_SIGNAL_HIDE.
(base_breakpoint_explains_signal): Return BPSTAT_SIGNAL_PASS
instead of BPSTAT_SIGNAL_HIDE.
* infrun.c (handle_inferior_event): Rework random signal checks.
This goes a step forward in making only TARGET_WAITKIND_STOPPED talk
about signals.
There's no reason for the "catchpoint" TARGET_WAITKIND_XXXs to consult
bpstat about signals -- unlike breakpoints, all these events are
continuable, so we don't need to do a remove-break/step/reinsert-break
-like dance. That means we don't actually need to run them through
process_event_stop_test (for the bpstat_what checks), and can just use
bpstat_causes_stop instead. Note we were already using it in the
TARGET_WAITKIND_(V)FORKED cases.
Then, these "catchpoint" waitkinds don't need to set
ecs->random_signal for anything, because they check it immediately
afterwards (and the value they set is never used again).
gdb/
2013-11-14 Pedro Alves <palves@redhat.com>
* infrun.c (struct execution_control_state): Remove
'random_signal' field.
(handle_syscall_event): Use bpstat_causes_stop instead of
bpstat_explains_signal. Don't set ecs->random_signal.
(handle_inferior_event): New 'random_signal' local.
<TARGET_WAITKIND_FORKED, TARGET_WAITKIND_VFORKED,
TARGET_WAITKIND_EXECD>: Use bpstat_causes_stop instead of
bpstat_explains_signal. Don't set ecs->random_signal.
<TARGET_WAITKIND_STOPPED>: Adjust to use local instead of
ecs->random_signal.
This comment applies to the whole handle_inferior_event flow, top to
bottom. Best move it to the function's intro.
gdb/
2013-11-14 Pedro Alves <palves@redhat.com>
* infrun.c (handle_inferior_event): Move comment from the
function's body to the function's description, adjusted.
Of all the TARGET_WAITKIND_XXXs event kinds other than
TARGET_WAITKIND_STOPPED, TARGET_WAITKIND_LOADED is the only kind that
doesn't end in a return, instead falling through to all the
signal/breakpoint/stepping handling code. But it only falls through
in the STOP_QUIETLY_NO_SIGSTOP and STOP_QUIETLY_REMOTE cases, which
means the
/* This is originated from start_remote(), start_inferior() and
shared libraries hook functions. */
if (stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_REMOTE)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
stop_stepping (ecs);
return;
}
bit is eventually reached. All tests before that is reached will
always fail. It's simpler to inline the stop_soon checks close to the
TARGET_WAITKIND_LOADED code, which allows removing the fall through.
Tested on x86_64 Fedora 17, but that doesn't exercise this
TARGET_WAITKIND_LOADED.
Also ran gdb.base/solib-disc.exp on Cygwin/gdbserver, which exercises
reconnection while the inferior is stopped at an solib event, but then
again, gdbserver always replies a regular trap on initial connection,
instead of the last event the program had seen:
Sending packet: $?#3f...Packet received: T0505:4ca72800;04:f8a62800;08:62fcc877;thread:d28;
Sending packet: $Hc-1#09...Packet received: E01
Sending packet: $qAttached#8f...Packet received: 0
Packet qAttached (query-attached) is supported
infrun: clear_proceed_status_thread (Thread 3368)
Sending packet: $qOffsets#4b...Packet received:
infrun: wait_for_inferior ()
infrun: target_wait (-1, status) =
infrun: 42000 [Thread 3368],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x77c8fc62
infrun: quietly stopped
infrun: stop_stepping
So the only way to exercise this would be to hack gdbserver. I didn't
go that far though. I'm reasonably confident this is correct.
gdb/
2013-11-14 Pedro Alves <palves@redhat.com>
* infrun.c (handle_inferior_event) <TARGET_WAITKIND_LOADED>:
Handle STOP_QUIETLY_NO_SIGSTOP and STOP_QUIETLY_REMOTE here.
Assert we never fall through out of the TARGET_WAITKIND_LOADED
case.
gold/
PR gold/14860
* ehframe.cc (Eh_frame_hdr::Eh_frame_hdr): Initialize lock_.
(Ehframe_hdr::set_final_data_size): Allocate a Lock.
* ehframe.h (Eh_frame_hdr::record_fde): Hold the lock while
updating fde_offsets_.
(Eh_frame_hdr::lock_): New data member.
While digging into a different memory corruption error, I happened to
notice one coming from the linetable code. In a couple of spots, the
wrong termination condition was used in a loop, leading gdb to read
one element past the end of the linetable.
Built and regtested on x86-64 Fedora 18. Also verified using
valgrind. I'm checking this in.
2013-11-14 Tom Tromey <tromey@redhat.com>
* python/py-linetable.c (ltpy_has_line)
(ltpy_get_all_source_lines): Fix loop termination condition.
* elf32-arm.c (elf32_arm_populate_plt_entry): Return a boolean
value, TRUE for success, FALSE for failure.
Fail if attempting to create a PLT entry for a thumb only target.
(elf32_arm_final_link_relocate): Check result of calling
elf32_arm_populate_plt_entry.
(elf32_arm_finish_dynamic_symbol): Likewise.
dw2-case-insensitive.exp: p fuNC_lang fails on arm. The problem occurs
when thumb mode code is generated. On ARM last bit of function pointer
value indicates whether the target function is an ARM (if 0) or Thumb
(if 1) routine. The PC address should refer to actual address in
either case. This patch adds new compile unit and function labels to
code which act as address ranges of compile unit and functions in
debug information. Therefore address ranges will have correct
addresses and not the ones with an incremented least significant bit.
This patch has been tested on x86_64 and arm machines.
gdb/testsuite/ChangeLog:
2013-11-14 Omair Javaid <Omair.Javaid@linaro.org>
* gdb.dwarf2/dw2-case-insensitive-debug.S: Updated compile unit
and function label names.
* gdb.dwarf2/dw2-case-insensitive.c: Created function and
compile unit labels.
Frontend sometimes need to evaluate expressions that are
language-specific. For instance, Eclipse uses the following
expression to determine the size of an address on the target:
-data-evaluate-expression "sizeof (void*)"
Unfortunately, if the main of the program being debugged is not C,
this may not work. For instance, if the main is in Ada, you get...
-data-evaluate-expression "sizeof (void*)"
^error,msg="No definition of \"sizeof\" in current context."
... and apparently decides to stop the debugging session as a result.
The recommendation sent was to specifically set the language to C
before trying to evaluate the expression. Something such as:
1. save current language
2. set language c
3. -data-evaluate-expression "sizeof (void*)"
4. Restore language
This has the same disadvantages as the ones outlined in the "Context
Management" section of the GDB/MI documentation regarding setting
the current thread or the current frame, thus recommending the use of
general command-line switches such as --frame, or --thread instead.
This patch follows the same steps for the language, adding a similar
new command option: --language LANG. Example of use:
-data-evaluate-expression --language c "sizeof (void*)"
^done,value="4"
gdb/ChangeLog:
* mi/mi-parse.h (struct mi_parse) <language>: New field.
* mi/mi-main.c (mi_cmd_execute): Temporarily set language to
PARSE->LANGUAGE during command execution, if set.
* mi/mi-parse.c: Add "language.h" #include.
(mi_parse): Add parsing of "--language" command option.
* NEWS: Add entry mentioning the new "--language" command option.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-language.exp: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Show): Add xref anchor for "show language" command.
(Context management): Place current subsection text into its own
subsubsection. Add new subsubsection describing the "--language"
command option.
This function provides the exact same functionality as extract_arg,
except that it takes a "const char**" instead of a "char **".
It allows us also to re-implement extract_arg almost as a simple
wrapper around the new function.
gdb/ChangeLog:
Pedro Alves <palves@redhat.com>
Joel Brobecker <brobecker@adacore.com>
* cli/cli-utils.h (extract_arg_const): Add declaration.
* cli/cli-utils.c (extract_arg_const): New function.
(extract_arg): Reimplement using extract_arg_const.
In addition to the fact that language.h depends on a number of struct
types declared in symtab.h, language.h also depends on an enumerated
type (domain_enum). So language.h should #include "symtab.h".
gdb/ChangeLog:
* language.h: Add "symtab.h" #include.
Commit 34a79995c4 changed how STT_FILE
symbols were emitted but this testcase got missed in the cleanup.
ld/testsuite/ChangeLog:
2013-11-14 Will Newton <will.newton@linaro.org>
* ld-arm/script-type.sym: Remove redundant STT_FILE symbol.
Joel Brobecker
Alan Modra
H.J. Lu
Yufeng Zhang
Maciej W. Rozycki
Luis Machado
Jan Kratochvil
uros
Andreas Arnez
Tom Tromey
Michael Zolotukhin
Doug Evans
Cary Coutant
Pedro Alves
Nick Clifton
Omair Javaid
Will Newton
Keith Seitz