We can also extend disp-step-syscall.exp to test GDBserver step over
breakpoint on syscall instruction. That is, we set a breakpoint
with a false condition on syscall instruction, so that GDBserver will
step over it.
This test triggers a GDBserver internal error, which can be fixed by
this series.
(gdb) PASS: gdb.base/disp-step-syscall.exp: fork: break cond on target: break on syscall insns
continue^M
Continuing.^M
Remote connection closed^M
(gdb) FAIL: gdb.base/disp-step-syscall.exp: fork: break cond on target: continue to fork again
In GDBserver, there is an internal error,
/home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:1922: A problem internal to GDBserver has been detected.
unsuspend LWP 25554, suspended=-1
the simplified reproducer is like,
$ ./gdb ./testsuite/outputs/gdb.base/disp-step-syscall/disp-step-fork
(gdb) b main
(gdb) c
(gdb) disassemble fork // in order to find the address of insn 'syscall'
....
0x00007ffff7ad6023 <+179>: syscall
(gdb) b *0x00007ffff7ad6023 if main == 0
(gdb) c
gdb/testsuite:
2016-03-03 Yao Qi <yao.qi@linaro.org>
* gdb.base/disp-step-syscall.exp (break_cond_on_syscall): New.
If target supports condition evaluation on target, invoke
break_cond_on_syscall for fork and vfork.
disp-step-syscall.exp was added to test displaced stepping over syscall
instructions, in which we set breakpoint on syscall instruction, and
step over it. In fact, we can extend the test to non-displaced-stepping
case. This patch wraps the test with displaced stepping on and off.
Note that the indentation and format isn't adjusted here to make this
patch easy to read. The following patch will fix the format separately.
gdb/testsuite:
2016-03-03 Yao Qi <yao.qi@linaro.org>
* gdb.base/disp-step-syscall.exp: Don't invoke
support_displaced_stepping.
(disp_step_cross_syscall): Test with displaced stepping off and
on if supported.
This patch moves some code out of disp_step_cross_syscall to a new proc
check_pc_after_cross_syscall and setup. Procedure setup is to start a
fresh GDB and compute the syscall instruction address.
gdb/testsuite:
2016-03-03 Yao Qi <yao.qi@linaro.org>
* gdb.base/disp-step-syscall.exp (check_pc_after_cross_syscall): New
proc.
(setup): New proc.
(disp_step_cross_syscall): Move code to check_pc_after_cross_syscall
and setup.
I see the following GDBserver internal error in two cases,
gdb/gdbserver/linux-low.c:1922: A problem internal to GDBserver has been detected.
unsuspend LWP 17200, suspended=-1
1. step over a breakpoint on fork/vfork syscall instruction,
2. step over a breakpoint on clone syscall instruction and child
threads hits a breakpoint,
the stack backtrace is
#0 internal_error (file=file@entry=0x44c4c0 "gdb/gdbserver/linux-low.c", line=line@entry=1922,
fmt=fmt@entry=0x44c7d0 "unsuspend LWP %ld, suspended=%d\n") at gdb/gdbserver/../common/errors.c:51
#1 0x0000000000424014 in lwp_suspended_decr (lwp=<optimised out>, lwp=<optimised out>) at gdb/gdbserver/linux-low.c:1922
#2 0x000000000042403a in unsuspend_one_lwp (entry=<optimised out>, except=0x66e8c0) at gdb/gdbserver/linux-low.c:2885
#3 0x0000000000405f45 in find_inferior (list=<optimised out>, func=func@entry=0x424020 <unsuspend_one_lwp>, arg=arg@entry=0x66e8c0)
at gdb/gdbserver/inferiors.c:243
#4 0x00000000004297de in unsuspend_all_lwps (except=0x66e8c0) at gdb/gdbserver/linux-low.c:2895
#5 linux_wait_1 (ptid=..., ourstatus=ourstatus@entry=0x665ec0 <last_status>, target_options=target_options@entry=0)
at gdb/gdbserver/linux-low.c:3632
#6 0x000000000042a764 in linux_wait (ptid=..., ourstatus=0x665ec0 <last_status>, target_options=0)
at gdb/gdbserver/linux-low.c:3770
#7 0x0000000000411163 in mywait (ptid=..., ourstatus=ourstatus@entry=0x665ec0 <last_status>, options=options@entry=0, connected_wait=connected_wait@entry=1)
at gdb/gdbserver/target.c:214
#8 0x000000000040b1f2 in resume (actions=0x66f800, num_actions=1) at gdb/gdbserver/server.c:2757
#9 0x000000000040f660 in handle_v_cont (own_buf=0x66a630 "vCont;c:p45e9.-1") at gdb/gdbserver/server.c:2719
when GDBserver steps over a thread, other threads have been suspended,
the "stepping" thread may create new thread, but GDBserver doesn't set
it suspend count to 1. When GDBserver unsuspend threads, the child's
suspend count goes to -1, and the assert is triggered. In fact, GDBserver
has already taken care of suspend count of new thread when GDBserver is
suspending all threads except the one GDBserver wants to step over by
https://sourceware.org/ml/gdb-patches/2015-07/msg00946.html
+ /* If we're suspending all threads, leave this one suspended
+ too. */
+ if (stopping_threads == STOPPING_AND_SUSPENDING_THREADS)
+ {
+ if (debug_threads)
+ debug_printf ("HEW: leaving child suspended\n");
+ child_lwp->suspended = 1;
+ }
but that is not enough, because new thread is still can be spawned in
the thread which is being stepped over. This patch extends the
condition that GDBserver set child's suspend count to one if it is
suspending threads or stepping over the thread.
gdb/gdbserver:
2016-03-03 Yao Qi <yao.qi@linaro.org>
PR server/19736
* linux-low.c (handle_extended_wait): Set child suspended
if event_lwp->bp_reinsert isn't zero.
Replace the code which is exactly what enqueue_pending_signal does.
gdb/gdbserver:
2016-03-02 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_resume_one_lwp_throw): Replace code with
enqueue_pending_signal.
Fixes rather embarassing gdb.trace regressions.
gdb/gdbserver/ChangeLog:
* tracepoint.c (cmd_qtstart): Only set ipa_tdesc_idx if agent
is actually loaded.
Printing and resolving of dynamic array's causes sporadic timeout issues on loaded systems.
2016-03-02 Bernhard Heckel <bernhard.heckel@intel.com>
gdb/testsuite/Changelog:
* gdb.fortran/vla-history.exp: Lookup array elements and printing exceeds timeout.
Adding a dummy assignment as a new breakpoint anchor because
breakpoint on return statement doesn't work for GCC 5.x.
2016-03-02 Bernhard Heckel <bernhard.heckel@intel.com>
gdb/testsuite/Changelog:
* gdb.cp/vla-cxx.cc: Insert dummy assignment as anchor for an breakpoint.
Nullify pointers to avoid an undefined association status.
2016-03-02 Bernhard Heckel <bernhard.heckel@intel.com>
gdb/testsuite/Changelog:
* gdb.mi/vla.f90: Nullify pointer after declaration.
Add new maintainer to Write After Approval.
2016-03-02 Bernhard Heckel <bernhard.heckel@intel.com>
* MAINTAINERS (Write After Approval): Add Bernhard Heckel.
Fixes, on F23:
.../src/gdb/testsuite/gdb.trace/ftrace-lock.c: In function 'gdb_agent_gdb_collect':
.../src/gdb/testsuite/gdb.trace/ftrace-lock.c:50:3: warning: implicit declaration of function 'sleep' [-Wimplicit-function-declaration]
sleep (1);
^
gdb/testsuite/ChangeLog:
2016-03-01 Pedro Alves <palves@redhat.com>
* gdb.trace/ftrace-lock.c: Include <unistd.h>.
This testcase currently fails to compile on Fedora 23:
.../src/gdb/testsuite/gdb.threads/watchpoint-fork-mt.c: In function 'start':
.../src/gdb/testsuite/gdb.threads/watchpoint-fork-mt.c:70:11: warning: implicit declaration of function 'pthread_yield' [-Wimplicit-function-declaration]
i = pthread_yield ();
^
.../src/gdb/testsuite/gdb.threads/watchpoint-fork-child.c: In function 'forkoff':
.../src/gdb/testsuite/gdb.threads/watchpoint-fork-child.c:114:8: warning: implicit declaration of function 'pthread_yield' [-Wimplicit-function-declaratio
n]
i = pthread_yield ();
^
/tmp/ccUkNIsI.o: In function `start':
.../src/gdb/testsuite/gdb.threads/watchpoint-fork-mt.c:70: undefined reference to `pthread_yield'
(...)
collect2: error: ld returned 1 exit status
UNSUPPORTED: gdb.threads/watchpoint-fork.exp: child: multithreaded: Couldn't compile watchpoint-fork-child.c: unrecognized error
UNTESTED: gdb.threads/watchpoint-fork.exp: child: multithreaded: watchpoint-fork.exp
testcase .../src/gdb/testsuite/gdb.threads/watchpoint-fork.exp completed i
The glibc manual says, on _GNU_SOURCE:
"You should define these macros by using ‘#define’ preprocessor
directives at the top of your source code files. These directives must
come before any #include of a system header file."
I instead put it in the header all the .c files of the testcase must
include anyway.
gdb/testsuite/ChangeLog:
2016-03-01 Pedro Alves <palves@redhat.com>
* gdb.threads/watchpoint-fork-child.c: Include "watchpoint-fork.h"
before anything else.
* gdb.threads/watchpoint-fork-mt.c: Likewise. Don't define
_GNU_SOURCE here.
* gdb.threads/watchpoint-fork-st.c: Include "watchpoint-fork.h"
before anything else.
* gdb.threads/watchpoint-fork.h: Define _GNU_SOURCE.
This patch fixes the following error,
ERROR: (/scratch/yao/gdb/build-git/arm-linux-gnueabihf/gdb/testsuite/outputs/gdb.arch/arm-disp-step/arm-disp-step) No such file or directory
FAIL: gdb.arch/arm-disp-step.exp: Can't run to main
gdb/testsuite:
2016-03-01 Yao Qi <yao.qi@linaro.org>
* gdb.arch/arm-disp-step.exp: Use standard_testfile and
prepare_for_testing.
When we compile gdb.arch/arm-neon.c with options that don't enable NEON,
there are many error/warnings emitted into gdb.sum, which is annoying.
This patch fixes it by passing quiet to prepare_for_testing.
gdb/testsuite:
2016-03-01 Yao Qi <yao.qi@linaro.org>
* gdb.arch/arm-neon.exp: Pass quiet to prepare_for_testing.
Since test artifacts are always organized in a directory hierarchy, the
s390-tdbregs test case is not executed correctly any more. This is
because it uses an obsolete way of constructing the executable's path.
This change invokes prepare_for_testing instead.
gdb/testsuite/ChangeLog:
* gdb.arch/s390-tdbregs.exp: Use prepare_for_testing instead of
manually constructing the output path.
This fixes a GDB internal error that may occur when the inferior has no
valid stack pointer in r15.
gdb/testsuite/ChangeLog:
* gdb.arch/s390-stackless.S: New.
* gdb.arch/s390-stackless.exp: New.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_backchain_frame_unwind_cache): Avoid
exception when attempting to access the inferior's backchain.
The last patch supports several syscalls in linux-record.c, so now
GDB aarch64-linux backend can return these canonicalized syscall numbers
per aarch64 syscall number.
This patch fixes the following fails,
Process record and replay target doesn't support syscall number 59^M
Process record: failed to record execution log.^M
^M
Program stopped.^M
0x00000020000eab28 in pipe () from /lib/aarch64-linux-gnu/libc.so.6^M
(gdb) FAIL: gdb.reverse/pipe-reverse.exp: continue to breakpoint: marker2
Process record and replay target doesn't support syscall number 59^M
Process record: failed to record execution log.^M
^M
Program stopped.^M
0x00000020000eab28 in pipe () from /lib/aarch64-linux-gnu/libc.so.6^M
(gdb) FAIL: gdb.reverse/readv-reverse.exp: continue to breakpoint: marker2
gdb:
2016-02-29 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c (aarch64_canonicalize_syscall): Support
eventfd2, eventfd2, dup3, inotify_init1, fallocate and pipe2.
Return gdb_sys_epoll_create1 instead of gdb_sys_epoll_create
for aarch64_sys_epoll_create1.
Given two or more modules that import each other's scope, the current symbol
lookup routines would go round in circles looking through each import from
each module, possibly checking the same module twice or more until all possible
paths are marked as "searched".
Given enough modules, this causes an exponential slowdown in time taken to find
symbols that do exist, and infinite recursion when they don't.
gdb/ChangeLog:
* d-namespace.c (d_lookup_symbol_imports): Avoid recursive lookups from
cyclic imports.
gdb/testsuite/ChangeLog:
* gdb.dlang/circular.c: New file.
* gdb.dlang/circular.exp: New file.
This is an obvious patch to fix the following build error seen with
--enable-build-with-cxx:
../../src/gdb/rs6000-tdep.c: In function ‘rs6000_frame_cache* rs6000_frame_cache(frame_info*, void**)’:
../../src/gdb/rs6000-tdep.c:3242:15: error: invalid conversion from ‘void*’ to ‘rs6000_frame_cache*’ [-fpermissive]
return (*this_cache);
~^~~~~~~~~~~~
gdb/ChangeLog
* rs6000-tdep.c (rs6000_frame_cache): Explicitly cast return result
to avoid invalid conversion from void *.
This patch fixes various bugs in arm_record_exreg_ld_st_insn, and use
gdb.reverse/insn-reverse.c to test more arm instructions.
- Set flag SINGLE_REG correctly. In the arch reference manual,
SING_REG is true when the bit 8 of instruction is zero.
- Record the right D registers for instructions changing S registers.
- Fix the order of length and address in record_buf_mem array.
- Shift the offset by 2 instead of by 24.
This patch also fixes one internal error,
(gdb) PASS: gdb.reverse/finish-precsave.exp: BP at end of main
continue^M
Continuing.^M
../../binutils-gdb/gdb/utils.c:1072: internal-error: virtual memory exhausted.^M
A problem internal to GDB has been detected,FAIL: gdb.reverse/finish-precsave.exp: run to end of main (GDB internal error)
gdb:
2016-02-26 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_record_exreg_ld_st_insn): Set 'single_reg'
per bit 8. Check bit 20 instead of bit 4 for VMOV
instruction. Record D registers for instructions changing
S registers. Change of the order of length and address
in record_buf_mem array.
gdb/testsuite:
2016-02-26 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/insn-reverse.c [__arm__] (ext_reg_load): New.
[__arm__] (ext_reg_mov, ext_reg_push_pop): New.
(testcases): Update.
When GDB decodes these thumb special data instructions, such as 'mov sp, r7'
the Rd is got incorrectly. According to the arch reference manual, the Rd
is DN:Rdn, in which DN is bit 7 and Rdn is bits 0 to 2. This patch fixes it.
gdb:
2016-02-26 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (thumb_record_ld_st_reg_offset): Fix the register
number of Rd.
gdb/testsuite:
2016-02-26 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/aarch64.c: Rename to ...
* gdb.reverse/insn-reverse.c: ... it.
* gdb.reverse/aarch64.exp: Rename to ...
* gdb.reverse/insn-reverse.exp: ... it.
I said we can generialize gdb.reverse/aarch64.exp for other
architectures https://sourceware.org/ml/gdb-patches/2015-05/msg00482.html
and here is the patch to change aarch64.exp so that it can be used to
test for other architectures as well.
gdb/testsuite:
2016-02-26 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/aarch64.c: [__aarch64__] Include arm_neon.h.
(testcase_ftype): New.
(testcases): New array.
(n_testcases): New.
(main): Call each element in testcases.
* gdb.reverse/aarch64.exp: Remove is_aarch64_target check.
(read_testcase): New.
Do the tests in a loop.
Currently, 31-bit gdbserver doesn't support collecting/supplying high
GPRs, VX registers, and TDB data. This is not much of a problem now,
since machines that have them usually have a 64-bit gdbserver that can
be used to debug 31-bit targets just fine. However, with fast
tracepoints, it's not possible to use a 64-bit gdbserver with a 31-bit
IPA (and thus a 31-bit target), so 31-bit gdbserver has to be used
for 31-bit targets. Thus, this patch is needed to allow collecting
high GPRs and VX registers on 31-bit targets via fast tracepoints.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_num_regs_3264): Define on 31-bit too.
(s390_regmap_3264) [!__s390x__]: New global.
(s390_collect_ptrace_register): Skip map entries containing -1.
(s390_supply_ptrace_register): Ditto.
(s390_fill_gprs_high): New function.
(s390_store_gprs_high): New function.
(s390_regsets): Add NT_S390_HIGH_GPRS.
(s390_get_hwcap): Enable on 31-bit.
(have_hwcap_s390_high_gprs): Enable on 31-bit.
(s390_arch_setup): Enable detection of high GPRs, TDB, VX on 31-bit.
Detect NT_S390_HIGH_GPRS.
(s390_usrregs_info_3264): Enable on 31-bit.
(s390_regs_info): Enable regs_info_3264 on 31-bit.
(initialize_low_arch): Initialize s390_regsets_info_3264 on 31-bit.
This patch removes gdb.base/branches.c which was added by the following
commit, but it is not used at all.
commit ea8122af14
Author: John Metzler <jmetzler@cygnus>
Date: Thu Apr 16 17:56:11 1998 +0000
Thu Apr 16 10:52:34 1998 John Metzler <jmetzler@cygnus.com>
* gdb.base/branches.c: Code with lots of loops and
subroutines. Used to test gdbs ability to single step through PC
changes, especially to test mips-tdep.c:mips_next_pc
gdb/testsuite:
2016-02-25 Yao Qi <yao.qi@linaro.org>
* gdb.base/branches.c: Remove.
If gdbserver and IPA are using different tdesc, they will disagree
about 'R' trace packet size. This results in mangled traces.
To make sure they pick the same tdesc, gdbserver pokes the tdesc
(specified as an index in a target-specific list) into a global
variable in IPA. In theory, IPA could find out the tdesc on its
own, but that may be complex (in particular, I don't know how to
tell whether we have LAST_BREAK on s390 without messing with ptrace),
and we'd have to duplicate the logic.
Tested on i386 and x86_64. On i386, it fixes two FAILs in ftrace.exp.
On x86_64, these failures have been KFAILed - one of them works now,
but the other now fails due to an unrelated reason (ugh).
gdb/gdbserver/ChangeLog:
PR gdb/13808
* Makefile.in: Add i386-*-linux-ipa.o and amd64-*-linux-ipa.o.
* configure.srv: Ditto.
* linux-aarch64-ipa.c (get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment.
* linux-amd64-ipa.c: Add "linux-x86-tdesc.h" include.
(init_registers_amd64_linux): Remove prototype.
(tdesc_amd64_linux): Remove declaration.
(get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment,
initialize remaining tdescs.
* linux-i386-ipa.c: Add "linux-x86-tdesc.h" include.
(init_registers_i386_linux): Remove prototype.
(tdesc_i386_linux): Remove declaration.
(get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment,
initialize remaining tdescs.
* linux-low.c (linux_get_ipa_tdesc_idx): New function.
(linux_target_ops): wire in linux_get_ipa_tdesc_idx.
* linux-low.h (struct linux_target_ops): Add get_ipa_tdesc_idx.
* linux-x86-low.c: Move tdesc declarations to linux-x86-tdesc.h.
(x86_get_ipa_tdesc_idx): New function.
(the_low_target): Wire in x86_get_ipa_tdesc_idx.
* linux-x86-tdesc.h: New file.
* target.h (struct target_ops): Add get_ipa_tdesc_idx.
(target_get_ipa_tdesc_idx): New macro.
* tracepoint.c (ipa_tdesc_idx): New macro.
(struct ipa_sym_addresses): Add addr_ipa_tdesc_idx.
(symbol_list): Add ipa_tdesc_idx.
(cmd_qtstart): Write ipa_tdesc_idx in the target.
(ipa_tdesc): Remove.
(ipa_tdesc_idx): New variable.
(get_context_regcache): Use get_ipa_tdesc.
(gdb_collect): Ditto.
(gdb_probe): Ditto.
* tracepoint.h (get_ipa_tdesc): New prototype.
(ipa_tdesc): Remove.
gdb/testsuite/ChangeLog:
PR gdb/13808
* gdb.trace/ftrace.exp (test_fast_tracepoints): Remove kfail.
We see this error when building with gcc 4.3.
../../gdb/i386-linux-tdep.c: In function ‘i386_linux_handle_segmentation_fault’:
../../gdb/i386-linux-tdep.c:399: error: ‘access’ may be used uninitialized in this function
../../gdb/i386-linux-tdep.c:399: error: ‘upper_bound’ may be used uninitialized in this function
../../gdb/i386-linux-tdep.c:399: error: ‘lower_bound’ may be used uninitialized in this function
It's a false positive, since the variables will always get initialized
in the TRY clause, and the CATCH returns.
gdb/ChangeLog:
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault):
Initialize variables.
The check used hardcoded targets and wasn't doing anything useful anyway,
since unsupported architectures blow up on link due to missing the IPA
library before they ever get to that check.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Remove unnecessary target check.
The PPC64 tracepoint patch added \y at the end of the call_insn pattern -
without that, it embarassed itself and matched the 'bl' in "Dump of
assem*bl*er code for function" as the powerpc call opcode. Since that
sounds like a generally good idea, I've added \y before and after
call_insn for every target. As a result, I had to change x86_64's mnemonic
to 'callq'.
gdb/testsuite/ChangeLog:
* gdb.trace/entry-values.exp: Surround $call_insn with '\y',
change x86_64 call_insn to 'callq'.
When encoding the agent expression operation ax_reg or ax_reg_mask, the
register number used is internal to GDB. However GDBServer expects a tdesc
based number.
This usually does not cause a problem since at the moment, for raw
registers GDBServer R trace action ignores the register mask and just
collects all registers.
It can be a problem, however with pseudo registers on some platforms if the
tdesc number doesn't match the GDB internal register number.
This is the case with ARM, the upcoming ARM tracepoint support, fails
these test cases without this patch:
gdb.trace/collection.exp: collect register locals collectively:*
GDBSever would exit with: unhandled register size
Since the register number is not mapped.
This patch fixes these issues by calling gdbarch_remote_register_number
before encoding the register number in the ax_reg or ax_reg_mask operation.
Tested on x86 native-gdbserver no regressions observed.
gdb/ChangeLog:
* ax-general.c (ax_reg): Call gdbarch_remote_register_number.
(ax_reg_mask): Likewise.
This unbreaks pending/delayed breakpoints handling, as well as
hardware watchpoints, on MIPS.
Ref: https://sourceware.org/ml/gdb-patches/2016-02/msg00681.html
The MIPS kernel reports SI_KERNEL for all kernel generated traps,
instead of TRAP_BRKPT / TRAP_HWBKPT, but GDB isn't aware of this.
Basically, this commit:
- Folds watchpoints logic into check_stopped_by_breakpoint, and
renames it to save_stop_reason.
- Adds GDB_ARCH_IS_TRAP_HWBKPT.
- Makes MIPS set both GDB_ARCH_IS_TRAP_BRPT and
GDB_ARCH_IS_TRAP_HWBKPT to SI_KERNEL. In save_stop_reason, we
handle the case of the same si_code returning true for both
TRAP_BRPT and TRAP_HWBKPT by looking at what the debug registers
say.
Tested on x86-64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2016-02-24 Pedro Alves <palves@redhat.com>
* linux-nat.c (save_sigtrap) Delete.
(stop_wait_callback): Call save_stop_reason instead of
save_sigtrap.
(check_stopped_by_breakpoint): Rename to ...
(save_stop_reason): ... this. Bits of save_sigtrap folded here.
Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous
GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out
common code between the USE_SIGTRAP_SIGINFO and
!USE_SIGTRAP_SIGINFO blocks.
(linux_nat_filter_event): Call save_stop_reason instead of
save_sigtrap.
* nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT
si_code for MIPS.
* nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table. Add
comments on MIPS behavior.
(GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs.
gdb/gdbserver/ChangeLog:
2016-02-24 Pedro Alves <palves@redhat.com>
* linux-low.c (check_stopped_by_breakpoint): Rename to ...
(save_stop_reason): ... this. Use GDB_ARCH_IS_TRAP_HWBKPT and
handle ambiguous GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT.
Factor out common code between the USE_SIGTRAP_SIGINFO and
!USE_SIGTRAP_SIGINFO blocks.
(linux_low_filter_event): Call save_stop_reason instead of
check_stopped_by_breakpoint and check_stopped_by_watchpoint.
Update comments.
(linux_wait_1): Update comments.
As it is planned to add more architectures to this test, rename to a more
generic name.
gdb/testsuite/ChangeLog:
* gdb.trace/tfile-avx.c: Move to...
* gdb.trace/tracefile-pseudo-reg.c: Here.
* gdb.trace/tfile-avx.exp: Move to...
* gdb.trace/tracefile-pseudo-reg.exp: Here.
Support z-point, so tracepoints and breakpoints can be inserted at the same
location.
gdb/gdbserver/ChangeLog:
2016-02-24 Wei-cheng Wang <cole945@gmail.com>
* linux-ppc-low.c (ppc_supports_z_point_type): New function:
(ppc_insert_point, ppc_remove_point): Insert/remove z-packet breakpoints.
(ppc64_emit_ops_vector): Add target ops - ppc_supports_z_point_type,
ppc_insert_point, ppc_remove_point.
This commit fixes an error in exec_file_locate_attach where
the main executable could be loaded from outside the sysroot
if a nonempty, non-"target:" sysroot was set but the discovered
executable filename did not exist in that sysroot and did exist
on the main filesystem.
gdb/ChangeLog:
* exec.c (exec_file_locate_attach): Do not attempt to
locate main executable locally if not found in sysroot.
gdb/testsuite/ChangeLog:
* gdb.base/attach-pie-noexec.exp: Do not expect an error
message on attach.
gdb/ChangeLog:
Extend "skip" command to support -file, -gfile, -function, -rfunction.
* NEWS: Document new features.
* skip.c: #include "fnmatch.h", "gdb_regex.h".
(skiplist_entry) <file>: Renamed from filename.
<function>: Renamed from function_name.
<file_is_glob, function_is_regexp>: New members.
<compiled_function_regexp, compiled_function_regexp_is_valid>:
New members.
(make_skip_entry): New function.
(free_skiplist_entry, free_skiplist_entry_cleanup): New functions.
(make_free_skiplist_entry_cleanup): New function.
(skip_file_command): Update.
(skip_function, skip_function_command): Update.
(compile_skip_regexp): New functions.
(skip_command): Add support for new options.
(skip_info): Update.
(skip_file_p, skip_gfile_p): New functions.
(skip_function_p, skip_rfunction_p): New functions.
(function_name_is_marked_for_skip): Update and simplify.
(_initialize_step_skip): Update.
* symtab.c: #include "fnmatch.h".
(compare_glob_filenames_for_search): New function.
* symtab.h (compare_glob_filenames_for_search): Declare.
* utils.c (count_path_elements): New function.
(strip_leading_path_elements): New function.
* utils.h (count_path_elements): Declare.
(strip_leading_path_elements): Declare.
gdb/doc/ChangeLog:
* gdb.texinfo (Skipping Over Functions and Files): Document new
options to "skip" command. Update docs of output of "info skip".
gdb/testsuite/ChangeLog:
* gdb.base/skip.c (test_skip): New function.
(end_test_skip_file_and_function): New function.
(test_skip_file_and_function): New function.
* gdb.base/skip1.c (test_skip): New function.
(skip1_test_skip_file_and_function): New function.
* gdb.base/skip.exp: Add tests for new skip options.
* gdb.base/skip-solib.exp: Update expected output.
* gdb.perf/skip-command.cc: New file.
* gdb.perf/skip-command.exp: New file.
* gdb.perf/skip-command.py: New file.
This patch updates the syscalls in sync with syscalls/aarch64-linux.xml.
Some syscalls are still not supported by gdb/linux-record.c yet. Mark
them UNSUPPORTED_SYSCALL_MAP.
This patch fixes the following test fail,
Process record and replay target doesn't support syscall number 56^M
Process record: failed to record execution log.^M
^M
Program stopped.^M
0x00000020000e9dfc in open () from /lib/aarch64-linux-gnu/libc.so.6^M
(gdb) FAIL: gdb.reverse/fstatat-reverse.exp: continue to breakpoint: marker2
gdb:
2016-02-23 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c (enum aarch64_syscall) <aarch64_sys_mknod>:
Remove.
<aarch64_sys_mkdir, aarch64_sys_unlink, aarch64_sys_symlink>: Remove.
<aarch64_sys_link, aarch64_sys_rename, aarch64_sys_faccess>: Remove.
<aarch64_sys_mknodat, aarch64_sys_mkdirat>: New.
<aarch64_sys_unlinkat, aarch64_sys_symlinkat>: New.
<aarch64_sys_linkat, aarch64_sys_renameat, aarch64_sys_faccessat>: New.
<aarch64_sys_open, aarch64_sys_readlink, aarch64_sys_fstatat>: Remove.
<aarch64_sys_openat, aarch64_sys_readlinkat>: New.
<aarch64_sys_newfstatat>: New.
(UNSUPPORTED_SYSCALL_MAP): New macro.
(aarch64_canonicalize_syscall): Add missing syscalls.
unavailable.exp executes "info registers", expecting to find at least
two instances of "<unavailable>". However, it uses
"<unavailable>.*<unavailable>" as the pattern, which doesn't match
when the last register happens to be available (eg. PC). Change it
to ".*<unavailable>.*<unavailable>.*" instead.
Noticed on s390, no regression on x86_64.
gdb/testsuite/ChangeLog:
* gdb.trace/unavailable.exp (gdb_unavailable_registers_test_1): Fix
info registers pattern.
After building GDB
--with-python=/usr/bin/python3
and for example stripping ./gdb and running:
./gdb -data-directory data-directory/ -iex "add-auto-load-safe-path $PWD/gdb-gdb.gdb" -iex "add-auto-load-safe-path $PWD/gdb-gdb.
py" ./gdb
I get:
Make breakpoint pending on future shared library load? (y or [n]) [answered N; input not from terminal]
File "/home/jkratoch/redhat/gdb-test-python3/gdb/gdb-gdb.py", line 91
print "Warning: Cannot find enum type_flag_value type."
^
SyntaxError: Missing parentheses in call to 'print'
(top-gdb) q
gdb/ChangeLog
2016-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb-gdb.py (class TypeFlagsPrinter): Use parentheses for print.
This patch fixes the various code format issues in arm process record
in arm-tdep.c, such as using tab instead of spaces.
gdb:
2016-02-22 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: Fix code format issues.
gdb/testsuite/ChangeLog:
2016-02-18 Wei-cheng Wang <cole945@gmail.com>
* gdb.trace/tspeed.c (myclock): Return wallclock instead of
user+system time.
(trace_speed_test): Determine the iteration count for a time
between 15..30 seconds.
With Intel Memory Protection Extensions it was introduced the concept of
boundary violation. A boundary violations is presented to the inferior as
a segmentation fault having SIGCODE 3. This patch adds a
handler for a boundary violation extending the information displayed
when a bound violation is presented to the inferior. In the stop mode
case the debugger will also display the kind of violation: "upper" or
"lower", bounds and the address accessed.
On no stop mode the information will still remain unchanged. Additional
information about bound violations are not meaningful in that case user
does not know the line in which violation occurred as well.
When the segmentation fault handler is stop mode the out puts will be
changed as exemplified below.
The usual output of a segfault is:
Program received signal SIGSEGV, Segmentation fault
0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050,
c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68
68 value = *(p + len);
In case it is a bound violation it will be presented as:
Program received signal SIGSEGV, Segmentation fault
Upper bound violation while accessing address 0x7fffffffc3b3
Bounds: [lower = 0x7fffffffc390, upper = 0x7fffffffc3a3]
0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050,
c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68
68 value = *(p + len);
In mi mode the output of a segfault is:
*stopped,reason="signal-received",signal-name="SIGSEGV",
signal-meaning="Segmentation fault", frame={addr="0x0000000000400d7c",
func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"}
,{name="b",value="0x603050"}, {name="c",value="0x603070"},
{name="d",value="0x603090"},{name="len",value="7"}],
file="i386-mpx-sigsegv.c",fullname="i386-mpx-sigsegv.c",line="68"},
thread-id="1",stopped-threads="all",core="6"
in the case of a bound violation:
*stopped,reason="signal-received",signal-name="SIGSEGV",
signal-meaning="Segmentation fault",
sigcode-meaning="Upper bound violation",
lower-bound="0x603010",upper-bound="0x603023",bound-access="0x60302f",
frame={addr="0x0000000000400d7c",func="upper",args=[{name="p",
value="0x603010"},{name="a",value="0x603030"},{name="b",value="0x603050"},
{name="c",value="0x603070"},{name="d",value="0x603090"},
{name="len",value="7"}],file="i386-mpx-sigsegv.c",
fullname="i386-mpx-sigsegv.c",line="68"},thread-id="1",
stopped-threads="all",core="6"
2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* NEWS: Add entry for bound violation.
* amd64-linux-tdep.c (amd64_linux_init_abi_common):
Add handler for segmentation fault.
* gdbarch.sh (handle_segmentation_fault): New.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New.
(SIG_CODE_BONDARY_FAULT): New define.
(i386_linux_init_abi): Use i386_mpx_bound_violation_handler.
* i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New.
* i386-tdep.c (i386_mpx_enabled): Add as external.
* i386-tdep.c (i386_mpx_enabled): Add as external.
* infrun.c (handle_segmentation_fault): New function.
(print_signal_received_reason): Use handle_segmentation_fault.
gdb/testsuite/ChangeLog:
* gdb.arch/i386-mpx-sigsegv.c: New file.
* gdb.arch/i386-mpx-sigsegv.exp: New file.
* gdb.arch/i386-mpx-simple_segv.c: New file.
* gdb.arch/i386-mpx-simple_segv.exp: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Signals): Add bound violation display hints for
a SIGSEGV.
When we're looking at a tracefile trace frame where registers are not
available, and the tracepoint has only one location, we supply
the location's address as the PC register. However, this only works
if PC is not a pseudo register, and individual architectures may want
to guess more registers. Add a gdbarch hook that will handle that.
gdb/ChangeLog:
* arch-utils.c (default_guess_tracepoint_registers): New function.
* arch-utils.h (default_guess_tracepoint_registers): New prototype.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh: Add guess_tracepoint_registers hook.
* tracefile.c (tracefile_fetch_registers): Use the new gdbarch hook.
This patch series add fork support in target remote,
[PATCH v2 0/3] Target remote mode fork and exec support
https://sourceware.org/ml/gdb-patches/2015-12/msg00144.html
so GDB can be informed about the child, and adjust child correctly in
displaced stepping. The PR server/13796 was fixed by this patch
series actually. Test results on buildbot show this KFAIL->KPASS
change https://sourceware.org/ml/gdb-testers/2015-q4/msg10128.html
gdb/testsuite:
2016-02-18 Yao Qi <yao.qi@linaro.org>
* gdb.base/disp-step-syscall.exp (disp_step_cross_syscall):
Don't call setup_kfail.
Proc do_test in forking-threads-plus-breakpoint.exp has an argument
cond_bp_target, but the test doesn't use it to set
"breakpoint condition-evaluation", which is an oversight in the test.
This patch fixes it by setting "breakpoint condition-evaluation" per
$cond_bp_target.
gdb/testsuite:
2016-02-18 Yao Qi <yao.qi@linaro.org>
* gdb.threads/forking-threads-plus-breakpoint.exp (do_test):
Set "set breakpoint condition-evaluation" per $cond_bp_target.
exec_file_locate_attach allocates memory for full_exec_path (using
either exec_file_find, source_full_path_of or xstrdup) but this
memory is never freed. This commit adds the necessary cleanup.
gdb/ChangeLog:
* exec.c (exec_file_locate_attach): Add missing cleanup.
This is necessary for upcoming tracepoint support - otherwise, setting
a tracepoint and a breakpoint on the same address will fail, since gdbserver
won't know about gdb's breakpoint.
Tested on s390x-ibm-linux-gnu and s390-ibm-linux-gnu, RHEL 7.2.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_supports_z_point_type): New function.
(struct linux_target_ops): Wire s390_supports_z_point_type in.
This patch fixes an internal error that occurs in
gdb.threads/forking-threads-plus-breakpoint.exp:
/blah/binutils-gdb/gdb/target.c:2723: internal-error: Can't determine the
current address space of thread Thread 3170.3170
In default_thread_address_space, find_inferior_ptid couldn't find 3170.3170
because it had been overwritten in inferior_appeared, called as follows:
inferior_appeared
remote_add_inferior
remote_notice_new_inferior
remote_update_thread_list
The cause of the problem was the following sequence of events:
* GDB knows only about the main thread
* the first fork event is reported to GDB, saved as pending_event
* qXfer:threads:read gets the threads from the remote.
remove_new_fork_children id's the fork child from the pending event
and removes it from the list reported to GDB. All the rest of the
threads, including the fork parent, are added to the GDB thread list.
* GDB stops all the threads. All the stop events are pushed onto the
stop reply queue behind the pending fork event. The fork waitstatus
is saved in the fork parent thread's pending status field
thread_info.suspend.
* remote_wait_ns calls queued_stop_reply and process_stop_reply to
remove the fork event from the front of the stop reply queue and save
event information in the thread_info structure for the fork parent
thread. Unfortunately, none of the information saved in this way is
the fork-specific information.
* A subsequent qXfer:threads:read packet gets the thread list including
the fork parent and fork child. remove_new_fork_children checks the
thread list to see if there is a fork parent, doesn't find one, checks
the stop reply queue for a pending fork event, doesn't find one, and
allows the fork child thread to be reported to GDB before the fork
event has been handled. remote_update_thread_list calls
remote_notice_new_thread and overwrites the current (main) thread in
inferior_appeared.
So the fork event has been reported out of target_wait but it was left
pending on the infrun side (infrun.c:save_waitstatus). IOW, the fork
event hasn't been processed by handle_inferior_event yet, so it hasn't
made it to tp->pending_follow yet.
The fix is to check thread_info.suspend along with the
thread_info.pending_follow in remote.c:remove_new_fork_children, to
prevent premature reporting of the fork child thread creation.
gdb/ChangeLog:
PR remote/19496
* remote.c (remove_new_fork_children): Check for pending
fork status in thread_info.suspend.
gdb/testsuite/ChangeLog:
PR remote/19496
* gdb.threads/forking-threads-plus-breakpoint.exp (do_test):
Remove kfail for PR remote/19496.
Just like standard_output_file, standard_temp_file should use multiple
directories to make the tests parallel-safe. However,
standard_temp_file is sometimes called in some procedures that are not
test-specific. For example, gdb_init uses it, but is called once before
all test files are ran. Therefore, we can't organize it in a
temp/gdb.subdir/testname layout, like standard_output_file.
Because it's just meant for temporary files that don't really need to be
inspected after the test, we can just put them in a directory based on
the runtest pid. There is always a single exp file being executed by a
particular runtest invocation at any given time, so it should be safe.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (standard_temp_file): Return a path specific to
the runtest invocation.
In save-trace.exp, we want to test loading of a tracepoint definition
file with a relative path (I am not sure why in fact). We currently use
"savetrace-relative.tr", which ends up directly in testsuite/. If we
use [standard_output_file] on that path, it becomes absolute. I decided
to just replace [pwd] with . (a dot) in the path given by
standard_output_file to make it relative. However, this trick only
works because [pwd] is a prefix of the standard output directory. So I
added a check to verify that precondition.
gdb/testsuite/ChangeLog:
* gdb.trace/save-trace.exp: Change relative path to be in the
standard output directory.
I see the following error in testing aarch64 GDB debugging arm
program.
(gdb) PASS: gdb.reverse/readv-reverse.exp: set breakpoint at marker2
continue
Continuing.
=================================================================
==32273==ERROR: AddressSanitizer: attempting free on address which was not malloc()-ed: 0x000000ce4c00 in thread T0
#0 0x2ba5615645c7 in __interceptor_free (/usr/lib/x86_64-linux-gnu/libasan.so.1+0x545c7)^M
#1 0x4be8b5 in VEC_CORE_ADDR_cleanup /home/yao/SourceCode/gnu/gdb/git/gdb/common/gdb_vecs.h:34^M
#2 0x5e6d95 in do_my_cleanups /home/yao/SourceCode/gnu/gdb/git/gdb/common/cleanups.c:154^M
#3 0x64c99a in fetch_inferior_event /home/yao/SourceCode/gnu/gdb/git/gdb/infrun.c:3975^M
#4 0x678437 in inferior_event_handler /home/yao/SourceCode/gnu/gdb/git/gdb/inf-loop.c:44^M
#5 0x5078f6 in remote_async_serial_handler /home/yao/SourceCode/gnu/gdb/git/gdb/remote.c:13223^M
#6 0x4cecfd in run_async_handler_and_reschedule /home/yao/SourceCode/gnu/gdb/git/gdb/ser-base.c:137^M
#7 0x676864 in gdb_wait_for_event /home/yao/SourceCode/gnu/gdb/git/gdb/event-loop.c:834^M
#8 0x676a27 in gdb_do_one_event /home/yao/SourceCode/gnu/gdb/git/gdb/event-loop.c:323^M
#9 0x676aed in start_event_loop /home/yao/SourceCode/gnu/gdb/git/gdb/event-loop.c:347^M
#10 0x6706d2 in captured_command_loop /home/yao/SourceCode/gnu/gdb/git/gdb/main.c:318^M
#11 0x66db8c in catch_errors /home/yao/SourceCode/gnu/gdb/git/gdb/exceptions.c:240^M
#12 0x6716dd in captured_main /home/yao/SourceCode/gnu/gdb/git/gdb/main.c:1157^M
#13 0x66db8c in catch_errors /home/yao/SourceCode/gnu/gdb/git/gdb/exceptions.c:240^M
#14 0x671b7a in gdb_main /home/yao/SourceCode/gnu/gdb/git/gdb/main.c:1165^M
#15 0x467684 in main /home/yao/SourceCode/gnu/gdb/git/gdb/gdb.c:32^M
#16 0x2ba563ed7ec4 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21ec4)^M
#17 0x4676b2 (/scratch/yao/gdb/build-git/aarch64-linux-gnu/gdb/gdb+0x4676b2)
looks we should discard cleanup if function
arm_linux_software_single_step returns early, or create cleanup when
it is needed.
gdb:
2016-02-16 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_software_single_step): Assign
'old_chain' later.
Method syscall_next_pc of struct arm_get_next_pcs_ops has an argument
PC, which is not necessary, because PC can be got from regcache in
'struct arm_get_next_pcs'. This patch removes the PC argument of
syscall_next_pc.
gdb:
2016-02-16 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.h (struct arm_get_next_pcs_ops)
<syscall_next_pc>: Remove argument PC. Callers updated.
* arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
Remove argument PC. Get pc from regcache_read_pc.
* arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Remove
argument PC.
gdb/gdbserver:
2016-02-16 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (get_next_pcs_syscall_next_pc): Remove argument
PC. Get pc from regcache_read_pc.
The testfile has not ran because:
gdb.arch/i386-prologue.c:34:3: warning: implicit declaration of function 'standard' [-Wimplicit-function-declaration]
standard ();
^
gdb.arch/i386-prologue.c:35:3: warning: implicit declaration of function 'stack_align_ecx' [-Wimplicit-function-declaration]
stack_align_ecx ();
^
gdb.arch/i386-prologue.c:36:3: warning: implicit declaration of function 'stack_align_edx' [-Wimplicit-function-declaration]
stack_align_edx ();
^
gdb.arch/i386-prologue.c:37:3: warning: implicit declaration of function 'stack_align_eax' [-Wimplicit-function-declaration]
stack_align_eax ();
^
gdb/testsuite/ChangeLog
2016-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/i386-prologue.c: Add missing prototypes.
Since
commit 2151ccc56c
Author: Simon Marchi <simon.marchi@ericsson.com>
Date: Mon Feb 8 14:02:36 2016 -0500
Always organize test artifacts in a directory hierarchy
these testfiles could not build.
gdb/testsuite/ChangeLog
2016-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/i386-gnu-cfi.exp: Use standard_output_file.
* gdb.arch/i386-prologue.exp: Likewise.
* gdb.arch/i386-size.exp: Likewise.
gdb/testsuite/ChangeLog:
* gdb.base/wrong_frame_bt_full.exp: Use standard_output_file to
define object file path.
* gdb.btrace/gcore.exp: Use standard_output_file to define core
file path.
* lib/opencl.exp (gdb_compile_opencl_hostapp): Use
standard_output_file to define binfile.
core_addr_to_string_nz returns string which has "0x" prefix, so don't
need to print "0x" again. This patch is to remove the "0x".
gdb:
2016-02-15 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_analyze_prologue): Remove "0x".
gcc-4.9.2-6.fc21.x86_64 -> gcc-5.3.1-2.fc23.x86_64
-PASS: gdb.fortran/vla-ptype.exp: ptype pvla not initialized
+FAIL: gdb.fortran/vla-ptype.exp: ptype pvla not initialized
-PASS: gdb.fortran/vla-history.exp: print vla1 allocated
+FAIL: gdb.fortran/vla-history.exp: print vla1 allocated
-PASS: gdb.fortran/vla-history.exp: print $2
+FAIL: gdb.fortran/vla-history.exp: print $2
-PASS: gdb.fortran/vla-value.exp: print undefined pvla
+FAIL: gdb.fortran/vla-value.exp: print undefined pvla
-PASS: gdb.fortran/vla-value.exp: print non-associated &pvla
+FAIL: gdb.fortran/vla-value.exp: print non-associated &pvla
-PASS: gdb.fortran/vla-value.exp: print undefined pvla(1,3,8)
+FAIL: gdb.fortran/vla-value.exp: print undefined pvla(1,3,8)
These issues get fixed (or removed if no longer applicable) by attached patch.
It is based on Googled:
http://www.cs.rpi.edu/~szymansk/OOF90/bugs.html#5
When a pointer is declared its status is undefined, and cannot be
safely queried with the associated intrinsic.
-> nullify(VARNAME)
+
https://software.intel.com/en-us/forums/intel-fortran-compiler-for-linux-and-mac-os-x/topic/268786
ALLOCATE is not supposed to initialize the array.
-> Remove checks like an initial print is: \\( *0, *0, *0...\\)
These regressions remain:
-PASS: gdb.fortran/library-module.exp: print var_i in lib
+FAIL: gdb.fortran/library-module.exp: print var_i in lib
-PASS: gdb.fortran/library-module.exp: print var_i in main
+FAIL: gdb.fortran/library-module.exp: print var_i in main
I believe it is more a GDB bug (in a code contributed by me), filed:
gdb.fortran/library-module.exp false regression on GCC upgrade
https://sourceware.org/bugzilla/show_bug.cgi?id=19635
gdb/testsuite/ChangeLog
2016-02-14 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix compatibility with recent gfortran-5.3.1.
* gdb.fortran/vla-history.exp (print vla1 allocated)
(print vla2 allocated, print $2, print $3): Remove
(print $4): Rename to ...
(print $2): ... here.
(print $9): Rename to ...
(print $5): ... here.
(print $10): Rename to ...
(print $6): ... here.
* gdb.fortran/vla.f90: Add pvla initialization.
> +static int max_value_size = 65536; /* 64k bytes */
FAIL: gdb.fortran/vla-value-sub.exp: print array2 in foo after it was filled (passed fixed array)
FAIL: gdb.fortran/vla-value-sub.exp: print array2 in foo after it was mofified in debugger (passed fixed array)
FAIL: gdb.fortran/vla-value-sub-finish.exp: print array2 in foo after it was filled
FAIL: gdb.fortran/vla-value-sub-finish.exp: print array2 in foo after it was mofified in debugger
print array2
value requires 296352 bytes, which is more than max-value-size
(gdb) FAIL: gdb.fortran/vla-value-sub.exp: print array2 in foo after it was filled (passed fixed array)
gdb/testsuite/ChangeLog
2016-02-14 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.fortran/vla-value-sub-finish.exp (set max-value-size 1024*1024):
New test.
* gdb.fortran/vla-value-sub.exp: Likewise.
gcc older than 4.9 doesn't understand ymm15 as a register name. Use
xmm15 instead.
gdb/testsuite/ChangeLog:
* gdb.trace/tfile-avx.c (main): Change ymm15 to xmm15.
Fix the core file path to use the standard output directory.
gdb/testsuite/ChangeLog:
* i386-biarch-core.exp: Define corefile using
standard_output_file.
We can use shared functions linux_{set,get}_pc_{64,32}bit in
linux-aarch64-low.c to write and read pc.
gdb/gdbserver:
2016-02-12 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_get_pc): Call linux_get_pc_64bit
or linux_get_pc_32bit.
(aarch64_set_pc): Call linux_set_pc_64bit or linux_set_pc_32bit.
GDB step cross kernel helpers only works if the kernel helpers are tail
called, which is the case how it is used in glibc. See __aeabi_read_tp
in sysdeps/unix/sysv/linux/arm/aeabi_read_tp.S. In __aeabi_read_tp,
branch/jump to the kernel helper is the last instruction, and the next
instruction address is in LR, which is in caller function. GDB can
handle this correctly. For example, glibc function __GI___ctype_init
calls __aeabi_read_tp
0xb6e19b30 <__GI___ctype_init+4>: ldr r3, [pc, #80] ;
0xb6e19b34 <__GI___ctype_init+8>: bl 0xb6e0a6e0 <__aeabi_read_tp>
0xb6e19b38 <__GI___ctype_init+12>: ldr r3, [pc, r3]
and __aeabi_read_tp calls kernel helper,
(gdb) disassemble __aeabi_read_tp
0xb6fef5d0 <+0>: mvn r0, #61440 ; 0xf000
0xb6fef5d4 <+4>: sub pc, r0, #31
once GDB or GDBserver single step instruction on 0xb6fef5d4, LR is
0xb6e19b38, which is right address of next instruction to set breakpoint
on.
However, if the kernel helpers are not tail-called, the LR is still the
address in the caller function of kernel helper's caller, which isn't
the right address of next instruction to set breakpoint on. For example,
we use kernel helper in main,
(gdb) disassemble main
....
0x00008624 <+32>: mov r3, #4064 ; 0xfe0^M
0x00008628 <+36>: movt r3, #65535 ; 0xffff^M
0x0000862c <+40>: blx r3
0x00008630 <+44>: ldr r3, [r11, #-8]
kernel helper is called on 0x0000862c and the expected next instruction
address is 0x00008630, but the LR now is the return address of main.
The problem here is LR may not have the right address because when we
single step the instruction, it isn't executed yet, so the LR isn't
updated. This patch fix this problem by decoding instruction, if the
instruction updates LR (BL and BLX), the next instruction address is
PC + INSN_SIZE, otherwise, get the address of next instruction from LR.
gdb:
2016-02-12 Yao Qi <yao.qi@linaro.org>
* arch/arm-linux.c (arm_linux_get_next_pcs_fixup): Calculate
nextpc according to instruction.
gdb/testsuite:
2016-02-12 Yao Qi <yao.qi@linaro.org>
* gdb.arch/arm-single-step-kernel-helper.c: New.
* gdb.arch/arm-single-step-kernel-helper.exp: New.
When I exercise GDBserver software single step, I see the following
error, which has been already handled by GDB properly.
In GDBserver log, we can see, GDBserver tries to single step instruction
on 0xb6e0a6e4, and destination address is 0xffff0fe0,
stop pc is 0xb6e0a6e4
Writing f001f0e7 to 0xffff0fe0 in process 7132
Failed to insert breakpoint at 0xffff0fe0 (Input/output error).
Failed to insert breakpoint at 0xffff0fe0 (-1).
(gdb) disassemble __aeabi_read_tp,+8
Dump of assembler code from 0xb6e0a6e0 to 0xb6e0a6e8:
0xb6e0a6e0 <__aeabi_read_tp+0>: mvn r0, #61440 ; 0xf000
0xb6e0a6e4 <__aeabi_read_tp+4>: sub pc, r0, #31
however, it fails inserting breakpoint there. This problem has already
fixed by GDB, see comments in arm-linux-tdep.c:arm_linux_software_single_step
/* The Linux kernel offers some user-mode helpers in a high page. We can
not read this page (as of 2.6.23), and even if we could then we
couldn't set breakpoints in it, and even if we could then the atomic
operations would fail when interrupted. They are all called as
functions and return to the address in LR, so step to there
instead. */
so we need to do the same thing in GDB side as well. This patch adds
a new field fixup in arm_get_next_pcs_ops, so that we can fix up PC
for arm-linux target. In this way, both GDB and GDBserver can single
step instructions going to kernel helpers.
gdb:
2016-02-12 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (arm_get_next_pcs): Call
self->ops->fixup if it isn't NULL.
* arch/arm-get-next-pcs.h: Include gdb_vecs.h.
(struct arm_get_next_pcs_ops) <fixup>: New field.
* arch/arm-linux.c: Include common-regcache.h and
arch/arm-get-next-pcs.h.
(arm_linux_get_next_pcs_fixup): New function.
* arch/arm-linux.h (arm_linux_get_next_pcs_fixup): Declare.
* arm-linux-tdep.c (arm_linux_get_next_pcs_ops): Initialize
it with arm_linux_get_next_pcs_fixup.
(arm_linux_software_single_step): Move code to
arm_linux_get_next_pcs_fixup.
* arm-tdep.c (arm_get_next_pcs_ops): Initialize it.
gdb/gdbserver:
2016-02-12 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (get_next_pcs_ops): Initialize it with
arm_linux_get_next_pcs_fixup.
This function is now basically identical to write_inferior_data_pointer,
remove it and change all references.
gdb/gdbserver/ChangeLog:
* tracepoint.c (x_tracepoint_action_download): Change
write_inferior_data_ptr to write_inferior_data_pointer.
(cmd_qtstart): Likewise.
(write_inferior_data_ptr): Remove.
(download_agent_expr): Change write_inferior_data_ptr to
write_inferior_data_pointer.
(download_tracepoint_1): Likewise.
(download_tracepoint): Likewise.
(download_trace_state_variables): Likewise.
In skip_artificial_frames we repeatedly call get_prev_frame_always until we get
a non-inline and non-tailcall frame assuming that there must be such a frame
eventually.
For record targets, however, we may have a frame chain that consists only of
artificial frames. This leads to a crash in get_frame_type when dereferencing a
NULL frame pointer.
Change skip_artificial_frames and skip_tailcall_frames to return NULL in such a
case and modify each caller to cope with a NULL return.
In frame_unwind_caller_pc and frame_unwind_caller_arch, we simply assert that
the returned value is not NULL. Their caller was supposed to check
frame_unwind_caller_id before calling those functions.
In other cases, we thrown an error.
In infcmd further move the skip_tailcall_frames call to the forward-stepping
case since we don't need a frame for reverse execution and we don't want to fail
because of that. Reverse-finish does make sense for a tailcall frame.
gdb/
* frame.h (skip_tailcall_frames): Update comment.
* frame.c (skip_artificial_frames, skip_tailcall_frames): Return NULL
if only artificial frames are found. Update comment.
(frame_unwind_caller_id): Handle NULL return.
(frame_unwind_caller_pc, frame_unwind_caller_arch): Assert that
skip_artificial_frames does not return NULL.
(frame_pop): Add an error if only tailcall frames are found.
* infcmd.c (finish_command): Move skip_tailcall_frames call into forward-
execution case. Add an error if only tailcall frames are found.
testsuite/
* gdb.btrace/tailcall-only.exp: New.
* gdb.btrace/tailcall-only.c: New.
* gdb.btrace/x86_64-tailcall-only.S: New.
* gdb.btrace/i686-tailcall-only.S: New.
Callers of frame_unwind_caller_* functions are supposed to check
frame_unwind_caller_id.
Add such a check to frame_info and treat an invalid caller ID as if the caller
PC were not available.
gdb/
* stack.c (frame_info): Check frame_unwind_caller_id.
This patch removes 'ops' in tracepoint, and uses helper functions to
call action handler instead.
The object layout of tracepoint_action may differ in gdbserver and
inferior depend on the alignment rule of target ABI, so gdbserver cannot
simply copy the object from its memory to inferior memory.
For example,
struct collect_memory_action
{
struct tracepoint_action base;
{
#ifndef IN_PROCESS_AGENT
const struct tracepoint_action_ops *ops;
#if
- char type;
| }
| ULONGEST addr;
| ULONGEST len;
- int32_t basereg;
};
and on PowerPC,
Wihtout ops with ops
0 1 2 3 0 1 2 3
0 |type| PADDING... 0 |ops-------------|
4 ................. 4 |type|PADDING....|
8 |addr------------ 8 |addr-------------
c ----------------| c -----------------|
10 |len------------- 10 |len--------------
14 ----------------| 14 -----------------|
18 |basereg--------| 18 |basereg---------|
so we cannot directly copy the object.
In this patch, 'ops' is removed in order to make the objects identical.
gdb/gdbserver/ChangeLog:
2016-02-11 Wei-cheng Wang <cole945@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
* tracepoint.c (struct tracepoint_action_ops): Remove.
(struct tracepoint_action): Remove ops.
(m_tracepoint_action_download, r_tracepoint_action_download)
(x_tracepoint_action_download, l_tracepoint_action_download): Adjust
size and offset accordingly.
(m_tracepoint_action_ops, r_tracepoint_action_ops)
(x_tracepoint_action_ops, l_tracepoint_action_ops): Remove.
(tracepoint_action_send, tracepoint_action_download): New functions.
Helpers for trace action handlers.
(add_tracepoint_action): Remove setup actions ops.
(download_tracepoint_1, tracepoint_send_agent): Call helper functions.
Currently, you can cd to the gdb/testsuite/ dir and use
make check-parallel, instead of using FORCE_PARALLEL:
$ make -j8 check-parallel RUNTESTFLAGS="--target_board=native-gdbserver"
$ make -j8 check RUNTESTFLAGS="--target_board=native-gdbserver" FORCE_PARALLEL=1
But you can't do that in the build/gdb/ dir:
$ make check-parallel RUNTESTFLAGS="--target_board=native-gdbserver"
make: *** No rule to make target `check-parallel'. Stop.
I find check-parallel a bit more convenient, and more typo-proof, so
this patch makes it work from the gdb build dir too.
While documenting this in testsuite/README, I found that the parallel
testing mode would better be pulled out to its own section and
extended.
gdb/ChangeLog:
2016-02-11 Pedro Alves <palves@redhat.com>
* Makefile.in (check-parallel): New rule.
gdb/testsuite/ChangeLog:
2016-02-11 Pedro Alves <palves@redhat.com>
* README (Parallel testing): New section.
(GDB_PARALLEL): Rewrite.
(FORCE_PARALLEL): Document.
This function is never used, since it is superseded by
arm_linux_displaced_step_copy_insn.
gdb/ChangeLog:
* arm-tdep.c (arm_displaced_step_copy_insn): Remove.
(ARM displaced stepping support): Remove reference to
arm_displaced_step_copy_insn in comment.
* arm-tdep.h (arm_displaced_step_copy_insn): Remove.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Remove
reference to arm_displaced_step_copy_insn in comment.
Almost obvious... change the type of some insn parameters, so that it
matches the rest of the code.
gdb/ChangeLog:
* arm-tdep.c (thumb_copy_unmodified_16bit): Change type of insn.
(thumb_copy_b): Likewise.
(arm_decode_b_bl_ldmstm): Likewise.
(thumb_copy_16bit_ldr_literal): Likewise.
(thumb_copy_pop_pc_16bit): Likewise.
This tests whether $ymm15 can be correctly collected and printed from
tfile. It covers:
- storing tdesc in tfile (without that, $ymm15 doesn't exist)
- ax_pseudo_register_collect for x86 (without that, $ymm15 cannot be
collected)
- register order in tfile_fetch_registers (without that, $ymm15h is
fetched from wrong position)
- off-by-one in tfile_fetch_registers (without that, $ymm15h is
incorrectly considered to be out of bounds)
- using proper tdesc in encoding tracepoint actions (without that,
internal error happens due to $ymm15h being considered unavailable)
gdb/testsuite/ChangeLog:
* gdb.trace/tfile-avx.c: New test.
* gdb.trace/tfile-avx.exp: New test.
This patch uses the target architecture rather then the objfile
architecture when encoding tracepoint actions.
The target architecture may contain additional registers. E.g. ARM VFP
registers. This information is needed to allow their collection. Since we
can never know whether the registers numbers in the target match the
binary's we have to use tdesc here.
One note about combined debuggers / multi-inferior from Pedro Alves:
In the combined debugger case taking Cell as the practical example that
gdb supports currently:
In that case, the main target_gdbarch() will be powerpc, but you may have set a
tracepoint on _spu_ code, which has a different gdbarch. so for that case,
target_gdbarch would be wrong. I think that in that case, we'd need to
find __the_ target/tdesc gdbarch that is (bfd) compatible with the
objfile's gdbarch.
I think cell/spu gdbserver doesn't support tracepoints, so we can ignore
this for now.
The multi-inferior/process case is somewhat related, but its simpler.
each inferior has its own gdbarch.
That is, target_gdbarch depends on the current inferior selected.
In fact, that just returns inferior->gdbarch nowaways.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* tracepoint.c (encode_actions_1): Use target_gdbarch () rather
than loc->gdbarch.
We have function regcache_raw_read_unsigned defined in both GDB and
GDBserver, so that it is used in common like this,
ULONGEST value;
status = regcache_raw_read_unsigned (regcache, regnum, &value);
'value' is correctly set in GDB side, but may not be correctly set
in GDBserver, because &value is passed in regcache_raw_read_unsigned
but collect_register may only set part of the whole variable. In my
test, I see the top half of 'value' is garbage. This patch fixes this
problem by clearing *VAL before calling collect_register.
gdb/gdbserver:
2016-02-10 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache_raw_read_unsigned): Clear *VAL.
tfile_fetch_registers currently wrongly fetches registers using
gdb order instead of g packet order. On x86_64 with AVX, this causes
problems with ymm*h and orig_rax registers: gdb has ymm*h first, while
g packet has orig_rax first.
gdb/ChangeLog:
* tracefile-tfile.c (tfile_fetch_registers): Use g packet order
instead of gdb order.
gdb/doc/ChangeLog:
* gdb.texinfo (Trace File Format): Remove misleading information
about register block ordering.
This resulted in the last register being considered unavailable.
On plain x86_64 (without AVX), this happened to be orig_rax.
gdb/ChangeLog:
* tracefile-tfile.c (tfile_fetch_registers): Fix off-by-one in bounds
check.
Now that the GDB 7.11 branch has been created, we can
bump the version number.
gdb/ChangeLog:
GDB 7.11 branch created (9ef9e6a6a0):
* version.in: Bump version to 7.11.50.DATE-git.
One of the last checks update_breakpoints_after_exec does while looping
over the list of breakpoints is check that the breakpoint has a valid
location spec. It uses event_location_empty_p to check if the location spec
is "empty", and if it is, the breakpoint is deleted.
momentary_breakpoint types rely on setting the breakpoint structure's
location spec to NULL, thereby causing an update to delete the breakpoint.
However, event_location_empty_p assumed that locations were never NULL.
As a result, GDB would crash dereferencing a NULL pointer whenever
update_breakpoints_after_exec would encounter a momentary_breakpoint.
This patch creates a new wrapper/helper function which tests that the given
breakpoint's location spec is non-NULL and if it is not "empty"
or "unspecified."
gdb/ChangeLog
PR breakpoints/19546
* breakpoint.c (breakpoint_event_location_empty_p): New function.
(update_breakpoints_after_exec, bkpt_re_set): Use this new function
instead of event_location_empty_p.
gdb/testsuite/ChangeLog
PR breakpoints/19546
* gdb.base/infcall-exec.c: New file.
* gdb.base/infcall-exec2.c: New file.
* gdb.base/infcall-exec.exp: New file.
MI is currently using string_to_event_location to enable the use of legacy
linespecs, but using this function (until this patchset) had the (as yet
unnoticed) side effect of allowing both MI and CLI representation for
explicit locations.
This patch simply changes MI to use the same legacy linespec functions
that the python and guile interpreters use. This eliminates the CLI syntax
for explicit locations (in MI).
gdb/ChangeLog
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Use
string_to_event_location_basic instead of string_to_event_location.
This patch, analogous to the previous python patch, implements proper
legacy linespec support in guile code using the newly introduced
string_to_event_location_basic.
gdb/ChangeLog
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Skip
leading whitespace and use string_to_event_location_basic instead
of new_linespec_location.
gdb/testsuite/ChangeLog
* gdb.guile/scm-breakpoint.exp (test_bkpt_address): New procedure.
(toplevel): Call test_bkpt_address.
Now that "legacy" linespecs benefit from consolidated support in
string_to_event_location_basic, python's Breakpoint command should use this
function to turn strings into event locations.
As a result, this patch fixes python/19506. Before:
(gdb) python gdb.Breakpoint("*main")
Traceback (most recent call last):
File "<string>", line 1, in <module>
RuntimeError: Function "*main" not defined.
Error while executing Python code.
After:
(gdb) python gdb.Breakpoint("*main")
Breakpoint 1 at 0x4005fb: file ../../../src/gdb/testsuite/gdb.python/py-breakpoint.c, line 32.
gdb/ChangeLog
PR python/19506
* python/py-breakpoint.c (bppy_init): Use
string_to_event_location_basic instead of new_linespec_location.
gdb/testsuite/ChangeLog
PR python/19506
* gdb.python/py-breakpoint.exp (test_bkpt_address): New procedure.
(toplevel): Call test_bkpt_address.
This patch refactors string_to_event_location, breaking it into two
separate functions:
1) string_to_event_location_basic
A "basic" string parser that implements support for "legacy" linespecs
(linespec, address, and probe locations). This function is intended to
be used by any UI wishing/needing to support this legacy behavior.
2) string_to_event_location
This is now intended as a CLI-only function which adds explicit location
parsing in a CLI-appropriate manner (in the form of traditional option/value
pairs).
Together these patches serve to simplify string-to-event location parsing
for all existing non-CLI interfaces (MI, guile, and python).
gdb/ChangeLog
* location.c (string_to_explicit_location): Note that "-p" is
reserved for probe locations and return NULL for any input
that starts with that.
(string_to_event_location): Move "legacy" linespec code to ...
(string_to_event_location_basic): ... here.
* location.h (string_to_event_location): Update comment.
(string_to_event_location_basic): New function.
Using AC_OUTPUT with arguments has been deprecated for some time in
autoconf, even in version 2.64, which we are using. This change should
not affect functionality.
I also removed the "exit 0"'s, they shouldn't be necessary.
gdb/ChangeLog:
* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
to AC_OUTPUT. Remove "exit 0" at the end.
* configure: Regenerate.
gdb/testsuite/ChangeLog:
* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
to AC_OUTPUT.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
to AC_OUTPUT.
* configure: Regenerate.
PR19548 shows that we still have problems related to 13fd3ff34329:
[PR17431: following execs with "breakpoint always-inserted on"]
https://sourceware.org/ml/gdb-patches/2014-09/msg00733.html
The problem this time is that we currently update the global location
list and try to insert breakpoint locations after re-setting _each_
breakpoint in turn.
Say:
- We have _more_ than one breakpoint set. Let's assume 2.
- There's a breakpoint with a pre-exec address that ends up being an
unmapped address after the exec.
- That breakpoint is NOT the first in the breakpoint list.
Then when handling an exec, and we re-set the first breakpoint in the
breakpoint list, we mistakently try to install the old pre-exec /
un-re-set locations of the other breakpoint, which fails:
(gdb) continue
Continuing.
process 28295 is executing new program: (...)/execl-update-breakpoints2
Error in re-setting breakpoint 1: Warning:
Cannot insert breakpoint 2.
Cannot access memory at address 0x1000764
Breakpoint 1, main (argc=1, argv=0x7fffffffd368) at /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/execl-update-breakpoints.c:34
34 len = strlen (argv[0]);
(gdb)
Fix this by deferring the global location list update till after all
breakpoints are re-set.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2016-02-09 Pedro Alves <palves@redhat.com>
PR breakpoints/19548
* breakpoint.c (create_overlay_event_breakpoint): Don't update
global location list here.
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, create_jit_event_breakpoint)
(update_breakpoint_locations):
(breakpoint_re_set): Update global location list after all
breakpoints are re-set.
gdb/testsuite/ChangeLog:
2016-02-09 Pedro Alves <palves@redhat.com>
PR breakpoints/19548
* gdb.base/execl-update-breakpoints.c (some_function): New
function.
(main): Call it.
* gdb.base/execl-update-breakpoints.exp: Add a second breakpoint.
Tighten expected GDB output.
Change the signature of gdbserver's siginfo_fixup functions so that it's
in line with gdb's. This gets rid of the following build error in C++:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c: In function ‘int x86_siginfo_fixup(siginfo_t*, void*, int)’:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c:694:21: error: invalid conversion from ‘void*’ to ‘gdb_byte* {aka unsigned char*}’ [-fpermissive]
FIXUP_32);
^
In file included from /home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c:31:0:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/../nat/amd64-linux-siginfo.h:52:5: error: initializing argument 2 of ‘int amd64_linux_siginfo_fixup_common(siginfo_t*, gdb_byte*, int, amd64_siginfo_fixup_mode)’ [-fpermissive]
int amd64_linux_siginfo_fixup_common (siginfo_t *native, gdb_byte *inf,
^
/home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c:698:20: error: invalid conversion from ‘void*’ to ‘gdb_byte* {aka unsigned char*}’ [-fpermissive]
FIXUP_X32);
^
In file included from /home/emaisin/src/binutils-gdb/gdb/gdbserver/linux-x86-low.c:31:0:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/../nat/amd64-linux-siginfo.h:52:5: error: initializing argument 2 of ‘int amd64_linux_siginfo_fixup_common(siginfo_t*, gdb_byte*, int, amd64_siginfo_fixup_mode)’ [-fpermissive]
int amd64_linux_siginfo_fixup_common (siginfo_t *native, gdb_byte *inf,
^
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_linux_siginfo_fixup): Change
void * to gdb_byte *.
* linux-low.c (siginfo_fixup): Likewise.
(linux_xfer_siginfo): Likewise.
* linux-low.h (struct linux_target_ops) <siginfo_fixup>:
Likewise.
* linux-x86-low.c (x86_siginfo_fixup): Likewise.
Add a cast to reinterpret a void* as a gdb_byte*.
2016-02-09 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (x86_siginfo_fixup): Add cast to gdb_byte*.
When running tests in parallel, each test puts its generated files in a
different directory, under "outputs". I think it would be nice if it
was always the case, as it would isolate the test cases a bit more. An
artifact created by a test wouldn't get overwritten by another test.
Also, it makes it easier to clean up. A lot of executables are left all
over the place because their names do not appear in gdb.*/Makefile. If
everything is in "outputs", then we just have to delete that directory
(which we already do).
At the same time it makes the gdb.foo directories and their Makefiles
useless in the build directory, since they are pretty much only used for
cleaning.
What do you think?
gdb/testsuite/ChangeLog:
* Makefile.in (ALL_SUBDIRS): Remove.
(clean mostlyclean): Do not recurse in ALL_SUBDIRS.
(distclean maintainer-clean realclean): Likewise.
* configure.ac (AC_OUTPUT): Remove gdb.*/Makefile.
* configure: Regenerate.
* gdb.ada/Makefile.in: Delete.
* gdb.arch/Makefile.in: Likewise.
* gdb.asm/Makefile.in: Likewise.
* gdb.base/Makefile.in: Likewise.
* gdb.btrace/Makefile.in: Likewise.
* gdb.cell/Makefile.in: Likewise.
* gdb.compile/Makefile.in: Likewise.
* gdb.cp/Makefile.in: Likewise.
* gdb.disasm/Makefile.in: Likewise.
* gdb.dlang/Makefile.in: Likewise.
* gdb.dwarf2/Makefile.in: Likewise.
* gdb.fortran/Makefile.in: Likewise.
* gdb.gdb/Makefile.in: Likewise.
* gdb.go/Makefile.in: Likewise.
* gdb.guile/Makefile.in: Likewise.
* gdb.java/Makefile.in: Likewise.
* gdb.linespec/Makefile.in: Likewise.
* gdb.mi/Makefile.in: Likewise.
* gdb.modula2/Makefile.in: Likewise.
* gdb.multi/Makefile.in: Likewise.
* gdb.objc/Makefile.in: Likewise.
* gdb.opencl/Makefile.in: Likewise.
* gdb.opt/Makefile.in: Likewise.
* gdb.pascal/Makefile.in: Likewise.
* gdb.perf/Makefile.in: Likewise.
* gdb.python/Makefile.in: Likewise.
* gdb.reverse/Makefile.in: Likewise.
* gdb.server/Makefile.in: Likewise.
* gdb.stabs/Makefile.in: Likewise.
* gdb.threads/Makefile.in: Likewise.
* gdb.trace/Makefile.in: Likewise.
* gdb.xml/Makefile.in: Likewise.
* lib/gdb.exp (make_gdb_parallel_path): Add check for
GDB_PARALLEL.
(standard_output_file): Remove check for GDB_PARALLEL, always
return path in outputs/$subdir/$testname.
While testing the following patch,
[PATCH] Always organize test artifacts in a directory hierarchy
https://sourceware.org/ml/gdb-patches/2016-01/msg00133.html
I noticed that it broke Ada testing. This lead me to think that
parallel testing when building in-tree didn't work previously in Ada.
It is confirmed by this test:
$ make check TESTS="gdb.ada/fun_addr.exp" -j 2
...
Running ./gdb.ada/fun_addr.exp ...
FAIL: gdb.ada/fun_addr.exp: compilation foo.adb
...
This patch fixes in-tree parallel testing for Ada, and consequently
serial and parallel testing when the aforementioned patch is applied.
The problem originates from the fact that Ada support code cd's to the
builddir before compiling. In itself it's not a problem, it allows to
place intermediate auto-generated files in that directory. The Ada
compilation refers to the source file, which is in another directory,
only by its base name (e.g. foo.adb). In serial mode, that worked
because builddir was the same as the source directory (e.g.
gdb.ada/fun_addr/). In an out-of-tree build, it works because the
source directory is added as an include directory (note: this is not the
same $srcdir as autoconf's):
set srcdir [file dirname $source]
additional_flags=-I$srcdir
which becomes:
additional_flags=-I/home/emaisin/build/binutils-gdb/gdb/testsuite/gdb.ada/fun_addr
However, when building in-tree, srcdir is relative: ./gdb.ada/fun_addr.
When using parallel or always-in-outputs-directory mode, we are cd'ed in
the outputs directory. So -I$srcdir is relative to the current
directory, which is wrong.
To fix it, I made the TCL variable srcdir (set in site.exp, from which
everything else is derived) always absolute. It is done by assigning
autoconf's abs_srcdir instead of autoconf's srcdir. This way -I$srcdir
will always be good, regardless of where we cd'ed to. A small apparent
change is that when running tests, DejaGnu will say:
Running /tmp/binutils-gdb/gdb/testsuite/gdb.ada/fun_addr.exp ...
instead of
Running ./gdb.ada/fun_addr.exp ...
I hope it's not too much of an annoyance. I think that it should make
the testsuite a tiny bit more robust against other bugs of the same
class.
Regtested in & out of tree, only with native target.
gdb/testsuite/ChangeLog:
* Makefile.in (abs_srcdir): Assign @abs_srcdir@.
(site.exp): Assign abs_srcdir to tcl's srcdir.
I built remote.c with -Wunused, to check a function I was working on,
turns out there is a bunch of unused variables.
gdb/ChangeLog:
* remote.c (remote_register_number_and_offset): Remove unused
variable(s).
(remote_thread_always_alive): Likewise.
(remote_update_thread_list): Likewise.
(process_initial_stop_replies): Likewise.
(remote_start_remote): Likewise.
(remote_check_symbols): Likewise.
(discard_pending_stop_replies): Likewise.
(process_stop_reply): Likewise.
(putpkt_binary): Likewise.
(getpkt): Likewise.
(remote_add_target_side_condition): Likewise.
(remote_insert_breakpoint): Likewise.
(remote_supports_stopped_by_sw_breakpoint): Likewise.
(remote_supports_stopped_by_hw_breakpoint): Likewise.
(remote_xfer_partial): Likewise.
(remote_read_btrace): Likewise.
(remote_async_serial_handler): Likewise.
(remote_thread_events): Likewise.
(_initialize_remote): Likewise.
This patch removes some dead code.
I noticed that varobj_delete was always called with dellist == NULL, so
I started removing that parameter. That allows removing a good chunk of
the code in varobj_delete, making it almost trivial. We can also remove
the resultp parameters in that whole trail. In turn, this shows that
struct cpstack, cppush and cppop were only used fo that mechanism, so
they can be removed as well.
I also moved the function comment to the header file to comply with
today's guideline, even though the rest of the file does not respect it
(yet).
gdb/ChangeLog:
* varobj.h (varobj_delete): Remove dellist parameter, update and
move documentation here.
* varobj.c (struct cpstack, cppush, cppop): Remove.
(delete_variable): Remove resultp (first) parameter.
(delete_variable_1): Likewise.
(varobj_delete): Remove dellist parameter and unused code.
(update_dynamic_varobj_children): Adjust varobj_delete call.
(update_type_if_necessary): Likewise.
(varobj_set_visualizer): Likewise.
(varobj_update): Likewise.
(value_of_root): Likewise.
(varobj_invalidate_iter): Likewise.
* mi/mi-cmd-var.c (mi_cmd_var_delete): Likewise.
BASEDIR was added by https://sourceware.org/ml/gdb-patches/2013-10/msg00587.html
in order to handle the different directory layout in serial testing
and parallel testing. BASEDIR is "gdb.base" in serial testing and is
"outputs/gdb.base/TESTNAME" in parallel testing. However, it doesn't
work if the GDBserver is in remote target, like this,
$ make check RUNTESTFLAGS='--target_board=remote-gdbserver-on-localhost foll-vfork.exp foll-exec.exp'
FAIL: gdb.base/foll-exec.exp: continue to first exec catchpoint (the program exited)
FAIL: gdb.base/foll-vfork.exp: exec: vfork and exec child follow, to main bp: continue to bp (the program exited)
FAIL: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: finish (the program exited)
FAIL: gdb.base/foll-vfork.exp: exec: vfork relations in info inferiors: continue to bp (the program exited)
these tests fail because the executable can't be found. With target
board native-gdbserver, the program is spawned this way,
spawn ../gdbserver/gdbserver --once :2347 /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/gdb.base/foll-vfork
so BASEDIR is correct. However, with target board
remote-gdbserver-on-localhost, the program is spawned
spawn /usr/bin/ssh -l yao localhost /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/../gdbserver/gdbserver --once :2346 /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/gdb.base/foll-vfork
so BASEDIR (either "gdb.base" or "outputs/gdb.base/TESTNAME") makes no
sense.
I had a fix that pass absolute directory to BASEDIR, but it assumes
that directory structure is the same on build and target, and it
doesn't work in remote host case. The current fix in this patch is
to get the directory from argv[0]. In any case, the program to be
exec'ed is at the same directory with the main program.
Note that these tests do "next N" to let program stop at the desired
line, but it is fragile, because GDB for different targets may skip
function prologue slightly differently, so I replace some of them by
"tbreak on LINE NUMBER and continue".
gdb/testsuite:
2016-02-04 Yao Qi <yao.qi@linaro.org>
* gdb.base/foll-exec-mode.c: Include limits.h.
(main): Add parameters argc and argv. Get directory from
argv[0].
* gdb.base/foll-exec-mode.exp: Don't pass -DBASEDIR in
compilation.
* gdb.base/foll-exec.c: Include limits.h.
(main): Add parameters argc and argv.
Get directory from argv[0].
* gdb.base/foll-exec.exp: Don't pass -DBASEDIR in compilation.
Adjust tests on the number of lines as source code changed.
* gdb.base/foll-vfork-exit.c: Include limits.h.
(main): Add one line of statement before vfork.
* gdb.base/foll-vfork.c: Include limits.h and string.h.
(main): Add parameters argc and argv. Get directory from
argv[0].
* gdb.base/foll-vfork.exp: Don't pass -DBASEDIR in compilation.
(setup_gdb): Set tbreak to skip some source lines.
* gdb.multi/bkpt-multi-exec.c: Include limits.h.
(main): Add parameters argc and argv. Get directory from
argv[0].
* gdb.multi/bkpt-multi-exec.exp: Don't pass -DBASEDIR in
compilation.
* gdb.multi/multi-arch-exec.c: Include limits.h and string.h.
(main): Add parameters argc and argv. Get directory from
argv[0].
* gdb.multi/multi-arch-exec.exp: Don't pass -DBASEDIR in
compilation.
Hi,
I see this error when GDB connects with qemu,
(gdb) n
....
Sending packet: $vCont;c#a8...Ack
Packet received: Ffstat,00000001,f6fff038
Cannot execute this command while the target is running.
Use the "interrupt" command to stop the target
and then try again.
looks we don't set rs->waiting_for_stop_reply to zero
before handle fileio request,
#10 0x00000000005edb64 in target_write (len=64, offset=4143968312, buf=0x7fffffffd570 "\375\377\377\377", annex=0x0, object=TARGET_OBJECT_MEMORY,
ops=<optimised out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/target.c:1922
#11 target_write_memory (memaddr=memaddr@entry=4143968312, myaddr=myaddr@entry=0x7fffffffd6a0 "", len=len@entry=64)
at /home/yao/SourceCode/gnu/gdb/git/gdb/target.c:1500
#12 0x00000000004b2b41 in remote_fileio_func_fstat (buf=0x127b258 "") at /home/yao/SourceCode/gnu/gdb/git/gdb/remote-fileio.c:1037
#13 0x00000000004b1878 in do_remote_fileio_request (uiout=<optimised out>, buf_arg=buf_arg@entry=0x127b240)
at /home/yao/SourceCode/gnu/gdb/git/gdb/remote-fileio.c:1204
#14 0x00000000005b8c7c in catch_exceptions_with_msg (func_uiout=<optimised out>, func=func@entry=0x4b1800 <do_remote_fileio_request>,
func_args=func_args@entry=0x127b240, gdberrmsg=gdberrmsg@entry=0x0, mask=mask@entry=RETURN_MASK_ALL)
at /home/yao/SourceCode/gnu/gdb/git/gdb/exceptions.c:187
#15 0x00000000005b8dea in catch_exceptions (uiout=<optimised out>, func=func@entry=0x4b1800 <do_remote_fileio_request>, func_args=func_args@entry=0x127b240,
mask=mask@entry=RETURN_MASK_ALL) at /home/yao/SourceCode/gnu/gdb/git/gdb/exceptions.c:167
#16 0x00000000004b2fff in remote_fileio_request (buf=0x127b240 "Xf6fff038,0:", ctrlc_pending_p=0) at /home/yao/SourceCode/gnu/gdb/git/gdb/remote-fileio.c:1255
#17 0x0000000000496f12 in remote_wait_as (ptid=..., status=0x7fffffffdb20, options=1) at /home/yao/SourceCode/gnu/gdb/git/gdb/remote.c:6997
however, we did set rs->waiting_for_stop_reply to zero before Luis's
patch https://sourceware.org/ml/gdb-patches/2015-10/msg00336.html
In fact, Luis's patch v1
https://sourceware.org/ml/gdb-patches/2015-08/msg00809.html is about
setting rs->waiting_for_stop_reply back to one after
remote_fileio_request, which is correct. However during the review, the
patch is changed and ends up with "not setting rs->waiting_for_stop_reply
to zero".
I manually test GDB, but I don't have a way to run regression tests.
gdb:
2016-02-04 Yao Qi <yao.qi@linaro.org>
* remote.c (remote_wait_as): Set rs->waiting_for_stop_reply to
0 before handling 'F' and set it back afterwards.
This is unused since 54eb231c4b, where
static arrays of ui_out_levels were replaced with vectors.
gdb/ChangeLog:
* ui-out.c (MAX_UI_OUT_LEVELS): Remove.
New bnds fields will be always present for x86 architecture.
Fixup for compatibility layer 32bits has to be fixed.
It was added the nat_siginfo to serving as intermediate step
between kernel provided siginfo and the fix up routine.
When executing compat_siginfo_from_siginfo or
compat_x32_siginfo_from_siginfo first the buffer read from the kernel are
converted into the nat_signfo for homogenization, then the fields of
nat_siginfo are use to set the compat and compat_x32 siginfo fields.
In other to make this conversion independent of the system where gdb
is compiled the most complete version of the siginfo, named as native
siginfo, is used internally as an intermediate step.
Conversion using nat_siginfo is exemplified below:
compat_siginfo_from_siginfo or compat_x32_siginfo_from_siginfo:
buffer (from the kernel) -> nat_siginfo -> 32 / X32 siginfo
(memcpy) (field by field)
siginfo_from_compat_x32_siginfo or siginfo_from_compat_siginfo:
32 / X32 siginfo -> nat_siginfo -> buffer (to the kernel)
(field by field) (memcpy)
Caveat: No support for MPX on x32.
2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* amd64-linux-siginfo.c (nat_siginfo_t, nat_sigval_t, nat_timeval):
New types.
(compat_siginfo): New bound fields added.
(compat_x32_siginfo): New field added.
(cpt_si_addr_lsb): New define.
(compat_siginfo_from_siginfo): Use nat_siginfo.
(siginfo_from_compat_siginfo): Use nat_siginfo.
(compat_x32_siginfo_from_siginfo): Likewise.
(siginfo_from_compat_x32_siginfo): Likewise.
Both Linux and glibc have introduced bound related fields in the
segmentation fault fields of the siginfo_t type. Add the new fields
to our x86's siginfo_t type too.
Kernel patch:
http://git.kernel.org/cgit/linux/kernel/git/tip/tip.git/commit/?id=ee1b58d36aa1b5a79eaba11f5c3633c88231da83
Glibc patch:
d4358b51c2
2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* linux-tdep.c (linux_get_siginfo_type): Add the _addr_bnd
structure to the siginfo if extra_fields contains
LINUX_SIGINFO_FIELD_ADDR_BND.
Use linux_get_siginfo_type_with_fields for adding bound fields on
segmentation fault for i386/amd64 siginfo.
2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* linux-tdep.h (linux_get_siginfo_type_with_fields): Make extern.
* linux-tdep.c (linux_get_siginfo_type_with_fields): Make extern.
* i386-linux-tdep.h (x86_linux_get_siginfo_type): New
function.
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Add
x86_linux_get_siginfo_type for the amd64 abi.
* i386-linux-tdep.c (x86_linux_get_siginfo_type): New
function.
(i386_linux_init_abi): Add new function at the i386 ABI
initialization.
First add new structure and function to allow architecture customization
for the siginfo structure.
2016-01-15 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* linux-tdep.h (linux_siginfo_extra_field_values): New enum values.
(linux_siginfo_extra_fields): New enum type.
* linux-tdep.c (linux_get_siginfo_type_with_fields): New function.
(linux_get_siginfo_type): Use new function.
This exposes the internal error Don mentioned in PR19496:
(1) internal error -- gdb/target.c:2713: internal-error: Can't determine the current address space of thread
More analysis here:
https://sourceware.org/ml/gdb-patches/2016-01/msg00685.html
The (now kfailed) internal error looks like:
continue &
Continuing.
(gdb) PASS: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: displaced=off: continue &
[New Thread 2846.2847]
(...)
[New Thread 2867.2867]
/home/pedro/gdb/mygit/src/gdb/target.c:2723: internal-error: Can't determine the current address space of thread Thread 2846.2846
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) KFAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: displaced=off: inferior 1 exited (GDB internal error) (PRMS: remote/19496)
Resyncing due to internal error.
gdb/testsuite/ChangeLog:
2016-02-01 Pedro Alves <palves@redhat.com>
PR remote/19496
* gdb.threads/forking-threads-plus-breakpoint.exp
(displaced_stepping_supported): New global.
(probe_displaced_stepping_support): New procedure.
(do_test): Add 'displaced' parameter, and use it.
(top level): Check for displaced stepping support. Add displaced
stepping on/off testing axis.
The test gdb.mi/mi-vla-fortran.exp reveals an issue with the DWARF
generated by gfortran.
In the test a pointer variable 'pvla2' is created:
real, pointer :: pvla2 (:, :)
Initially this variable will be unassociated, so something like this:
l = associated(pvla2)
should return false.
In the test gdb stops at a point _before_ pvla2 is associated with
anything, and we then try to print pvla2, the expectation is that gdb
should reply <not associated>.
The problem is that the data the DWARF directs gdb to read (to identify
if the variable is associated or not) is not initialised until the first
time pvla2 is accessed.
As a result gdb ends up reading uninitialised memory, sometimes this
uninitialised memory indicates the variable is associated (when it's
not). This first mistake can lead to a cascade of errors, reading
uninitialised memory, with the result that gdb builds an invalid type to
associate with the variable pvla2.
In some cases, this invalid type can be very large, which when we try to
print pvla2 causes gdb to allocate a large amount of memory.
A recent commit added a new gdb variable 'max-value-size', which
prevents gdb from allocating values of extreme size. As a result
directly trying to print pvla2 will now now error rather than allocate a
large amount of memory.
However, some of the later tests create a varobj for pvla2, and then
ask for the children of that varobj to be displayed. In the case where
an invalid type has been computed for pvla2 then the number of children
can be wrong, and very big, in which case trying to display all of these
children can cause gdb to consume an excessive amount of memory.
This commit first detects if printing pvla2 triggers the max-value-size
error, if it does then we avoid all the follow on tests relating to the
unassociated pvla2, which avoids the second error printing the varobj
children.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-vla-fortran.exp: Add XFAIL for accessing unassociated
pointer. Don't perform further tests on the unassociated pointer
if the first test fails.
For languages with dynamic types, an incorrect program, or uninitialised
variables within a program, could result in an incorrect, overly large
type being associated with a value. Currently, attempting to print such
a variable will result in gdb trying to allocate an overly large buffer.
If this large memory allocation fails then the result can be gdb either
terminating, or (due to memory contention) becoming unresponsive for the
user.
A new user visible variable in gdb helps guard against such problems,
two new commands are available:
set max-value-size
show max-value-size
The 'max-value-size' is the maximum size of memory in bytes that gdb
will allocate for the contents of a value. Any attempt to allocate a
value with a size greater than this will result in an error. The
initial default for this limit is set at 64k, this is based on a similar
limit that exists within the ada specific code.
It is possible for the user to set max-value-size to unlimited, in which
case the old behaviour is restored.
gdb/ChangeLog:
* value.c (max_value_size): New variable.
(MIN_VALUE_FOR_MAX_VALUE_SIZE): New define.
(show_max_value_size): New function.
(check_type_length_before_alloc): New function.
(allocate_value_contents): Call check_type_length_before_alloc.
(set_value_enclosing_type): Likewise.
(_initialize_values): Add set/show handler for max-value-size.
* NEWS: Mention new set/show command.
gdb/doc/ChangeLog:
* gdb.texinfo (Value Sizes): New section.
(Data): Add the 'Value Sizes' node to the menu.
gdb/testsuite/ChangeLog:
* gdb.base/max-value-size.c: New file.
* gdb.base/max-value-size.exp: New file.
* gdb.base/huge.exp: Disable max-value-size for this test.
A few typos. The comment about varobj_create has been misplaced since
the dawn of time.
gdb/ChangeLog:
* varobj.h (struct varobj): Fix typos in comments.
(struct lang_varobj_ops): Likewise.
* varobj.c (VAROBJ_TABLE_SIZE): Likewise.
(varobj_create): Move misplaced comment.
Two small changes so everything builds with latest GCC and its
-Wmisleading-indentation.
In the aarch64-tdep.c case, the two misindented lines should actually be
part of the for loop. It looks like the indentation is all done using
spaces in that file though... I fixed it (changed for tabs + spaces) for
the lines I touched.
In the xcoffread.c case, we can simply remove the braces and fix the
indentation.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_record_asimd_load_store): Add braces
to for include additional lines.
* xcoffread.c (scan_xcoff_symtab): Remove unnecessary braces.
rawmemchr is a dependency of strchrnul, so it should be explicitly
listed.
gdb/ChangeLog:
* gnulib/import/Makefile.am: Regenerate.
* gnulib/import/Makefile.in: Regenerate.
* gnulib/import/m4/gnulib-cache.m4: Regenerate.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add rawmemchr.
For a forthcoming patch, I need a "skip_to_colon" function. I noticed
there are two skip_to_semicolon (one in gdb and one in gdbserver). I
thought we could put it in common/, and generalize it for any character.
It turns out that the strchrnul function does exactly that. I imported
the corresponding module from gnulib, for those systems that do not have
it.
There are probably more places where this function can be used instead
of doing the work by hand (I am looking at
remote-utils.c::look_up_one_symbol).
gdb/ChangeLog:
* remote.c (skip_to_semicolon): Remove.
(remote_parse_stop_reply): Use strchrnul instead of
skip_to_semicolon.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
strchrnul.
* gnulib/aclocal.m4: Regenerate.
* gnulib/config.in: Regenerate.
* gnulib/configure: Regenerate.
* gnulib/import/Makefile.am: Regenerate.
* gnulib/import/Makefile.in: Regenerate.
* gnulib/import/m4/gnulib-cache.m4: Regenerate.
* gnulib/import/m4/gnulib-comp.m4: Regenerate.
* gnulib/import/m4/rawmemchr.m4: New file.
* gnulib/import/m4/strchrnul.m4: New file.
* gnulib/import/rawmemchr.c: New file.
* gnulib/import/rawmemchr.valgrind: New file.
* gnulib/import/strchrnul.c: New file.
* gnulib/import/strchrnul.valgrind: New file.
gdb/gdbserver/ChangeLog:
* server.c (skip_to_semicolon): Remove.
(process_point_options): Use strchrnul instead of
skip_to_semicolon.
In vla.f90, this single line of source is compiled to many instructions,
vla2(:, :, :) = 1311 ! vla2-allocated
it is quite slow (about several minutes in my testing) to step over this
source line without range stepping. This patch is to increase the timeout
value by 15 times, which is a magic number to make sure timeout disappears
in my testing with a slow arm-linux board.
gdb/testsuite:
2016-01-28 Yao Qi <yao.qi@linaro.org>
* gdb.fortran/vla-value.exp: Wrap test with with_timeout_factor.
I see GDB crashes in dprintf.exp on aarch64-linux testing,
(gdb) PASS: gdb.base/dprintf.exp: agent: break 29
set dprintf-style agent^M
(gdb) PASS: gdb.base/dprintf.exp: agent: set dprintf style to agent
continue^M
Continuing.
ASAN:SIGSEGV
=================================================================
==22475==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000008 (pc 0x000000494820 sp 0x7fff389b83a0 bp 0x62d000082417 T0)
#0 0x49481f in remote_add_target_side_commands /home/yao/SourceCode/gnu/gdb/git/gdb/remote.c:9190^M
#1 0x49e576 in remote_add_target_side_commands /home/yao/SourceCode/gnu/gdb/git/gdb/remote.c:9174^M
#2 0x49e576 in remote_insert_breakpoint /home/yao/SourceCode/gnu/gdb/git/gdb/remote.c:9240^M
#3 0x5278b7 in insert_bp_location /home/yao/SourceCode/gnu/gdb/git/gdb/breakpoint.c:2734^M
#4 0x52ac09 in insert_breakpoint_locations /home/yao/SourceCode/gnu/gdb/git/gdb/breakpoint.c:3159^M
#5 0x52ac09 in update_global_location_list /home/yao/SourceCode/gnu/gdb/git/gdb/breakpoint.c:12686
the root cause of this problem in this case is about linespec and
symtab which produces additional incorrect location and a NULL is added to
bp_tgt->tcommands. I posted a patch
https://sourceware.org/ml/gdb-patches/2015-12/msg00321.html to fix it
in linespec (the fix causes regression), but GDB still shouldn't add
NULL into bp_tgt->tcommands. The logic of build_target_command_list
looks odd to me. If we get something wrong in parse_cmd_to_aexpr (it
returns NULL), we shouldn't continue, instead we should set flag
null_command_or_parse_error. This is what this patch does. In the
meantime, we find build_target_condition_list has the same problem, so
fix it too.
gdb:
2016-01-28 Yao Qi <yao.qi@linaro.org>
* breakpoint.c (build_target_command_list): Don't call continue
if aexpr is NULL.
(build_target_condition_list): Likewise.
Nowadays, get_next_pcs in linux_target_ops has two parameters PC
and REGCACHE. Parameter PC looks redundant because it can be go
from REGCACHE. The patch is to remove PC from the arguments for
various functions.
gdb:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
Remove argument pc. Get pc by regcache_read_pc. Callers updated.
(arm_deal_with_atomic_sequence_raw): Likewise.
(thumb_get_next_pcs_raw): Likewise.
(arm_get_next_pcs_raw): Likewise.
(arm_get_next_pcs): Remove argument pc. Callers updated.
* arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_gdbserver_get_next_pcs): Remove argument pc.
* linux-low.c (install_software_single_step_breakpoints): Don't
call regcache_read_pc.
* linux-low.h (struct linux_target_ops) <get_next_pcs>: Remove
argument pc.
In install_software_single_step_breakpoints, we've got the regcache
of current_thread, so we don't have to bother get_pc to get pc,
instead we can get pc from regcache directly. Note that the callers
of install_software_single_step_breakpoints have already switched
current_thread to LWP.
Since the pc is got from regcache_read_pc, in the next patch, we can
get pc inside the implementation of *the_low_target.get_next_pcs and
stop passing pc to *the_low_target.get_next_pcs.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* linux-low.c (install_software_single_step_breakpoints): Call
regcache_read_pc instead of get_pc.
Nowadays, GDBserver disables async io (by ignoring SIGIO) when process
a serial event, and enables async io (by installing signal handler) when
resume the inferior and wait. GDBserver may miss SIGIO (by interrupt)
and doesn't process SIGIO in time, which is shown by
gdb.base/interrupt-noterm.exp. In the test, GDB sends "continue &" and
then "interrupt". if '\003' arrives at a period between GDBserver
receives vCont;c and enables async io, SIGIO is ignored because signal
handler isn't installed. GDBserver waits for the inferior and can not
notice '\003' until it returns from wait.
This patch changes the code to install SIGIO handler early, but block
and unblock SIGIO as needed. In this way, we don't remove SIGIO
handler, so SIGIO can't be ignored. However, GDBserver needs to
remove the signal handler when connection is closed.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (remote_close) [!USE_WIN32API]: Ignore SIGIO.
(unblock_async_io): Rename to ...
(block_unblock_async_io): ... it. New function.
(enable_async_io): Don't install SIGIO handler. Unblock it
instead.
(disable_async_io): Don't ignore SIGIO. Block it instead.
(initialize_async_io): Install SIGIO handler. Don't call
unblock_async_io.
GDBserver may read some packet together with '\003' in one go. We've
already checked '\003' first when reading packet by my patch,
Check input interrupt first when reading packet
https://sourceware.org/ml/gdb-patches/2016-01/msg00057.html
but if we don't check '\003' *after* each packet, the interrupt will
be processed next time GDBserver reads from the buffer, so that the
interrupt isn't processed in time. For example, GDB sends vCont;c and
interrupt (see gdb.base/interrupt-noterm.exp), we'll resume the
inferior and wait once packet vCont;c is seen. If we don't check the
interrupt character after vCont;c packet, interrupt character will stay
in the buffer unattended until GDBserver returns from the wait, which
may take a while. Note that since we've read '\003' from file
descriptor, SIGIO signal handler input_interrupt doesn't help either.
This issue can be exposed by hacking the end of getpkt like
@@ -1041,6 +1050,9 @@ getpkt (char *buf)
}
}
+ if (readchar_bufcnt > 0)
+ gdb_assert (*readchar_bufp != '\003');
+
return bp - buf;
}
and this can trigger internal error,
(gdb) PASS: gdb.base/interrupt-noterm.exp: interrupt
Remote connection closed^M
(gdb) FAIL: gdb.base/interrupt-noterm.exp: inferior received SIGINT
Remote debugging from host 10.2.206.40^M
/home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/remote-utils.c:1054: A problem internal to GDBserver has been detected.^M
getpkt: Assertion `*readchar_bufp != '\003'' failed.^M
This patch is to peek the buffer, if it is '\003', consume it and call
*the_target->request_interrupt.
gdb/gdbserver:
2016-01-26 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (getpkt): If the buffer isn't empty, and the
first character is '\003', call *the_target->request_interrupt.
GCC6 will warn about misleading indentation issues like:
gdb/ada-lang.c: In function ‘ada_evaluate_subexp’:
ada-lang.c:11423:9: error: statement is indented as if it were guarded by...
arg1 = unwrap_value (arg1);
^~~~
gdb/ada-lang.c:11421:7: note: ...this ‘else’ clause, but it is not
else
^~~~
In this case it would be a bug except for the fact the if clause already
returned early. So this misindented statement really only got executed
for the else case. But it could easily mislead a reader, so adding a
proper else block is the correct solution.
In case of c-typeprint.c (c_type_print_base) the if statement is indeed
misleadingly indented, but not a bug. Just indent correctly. The inflow.c
(terminal_ours_1) misindented block comes from the removal of an if clause
in commit d9d2d8b which looks correct. Just introduce an else to fixup the
indentation of the block. The linux-record.c misleadingly indented return
statements are just that. Misleading to the reader, but not actual bugs.
Just unindent them so they don't look like they fall under the wrong if
clause.
They were added by
PATCH: Multithreaded debugging for gdbserver
https://sourceware.org/ml/gdb-patches/2002-06/msg00157.html
but as a no-op, and the last usage of them was removed by
[gdbserver/RFC/RFA] Implement multiprocess extensions, add linux multiproces support.
https://sourceware.org/ml/gdb-patches/2009-03/msg00667.html
This patch is to remove them.
gdb/gdbserver:
2016-01-25 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (new_thread_notify): Remove.
(dead_thread_notify): Likewise.
* remote-utils.h (new_thread_notify): Remove declaration.
(dead_thread_notify): Likewise.
If you have "set follow-fork child" set, then if you do "info threads"
right after a fork, and before the child reports any other event to
GDB core, you'll see:
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 31875) "fork-plus-threa" (running)
2.1 process 31879 "fork-plus-threa" Selected thread is running.
(gdb)
The "Selected thread is running." bit is a bogus error. That was GDB
trying to fetch the current frame of thread 2.1, because the external
runnning state is "stopped", and then throwing an error because the
thread is actually running.
This actually affects all-stop + schedule-multiple as well.
The problem here is that on a fork event, GDB doesn't update the
external parent/child running states.
New comprehensive test included. The "kill inferior 1" / "kill
inferior 2" bits also trip on PR gdb/19494 (hang killing unfollowed
fork children), which was fixed by the previous patch.
gdb/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR threads/19461
* infrun.c (handle_inferior_event_1) <fork/vfork>: Update
parent/child running states.
gdb/testsuite/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR threads/19461
* gdb.base/fork-running-state.c: New file.
* gdb.base/fork-running-state.exp: New file.
linux_nat_kill relies on get_last_target_status to determine whether
the current inferior is stopped at a unfollowed fork/vfork event.
This is bad because many things can happen ever since we caught the
fork/vfork event... This commit rewrites that code to instead walk
the thread list looking for unfollowed fork events, similarly to what
was done for remote.c.
New test included. The main idea of the test is make sure that when
the program stops for a fork catchpoint, and the user kills the
parent, gdb also kills the unfollowed fork child. Since the child
hasn't been added as an inferior at that point, we need some other
portable way to detect that the child is gone. The test uses a pipe
for that. The program forks twice, so you have grandparent, child and
grandchild. The grandchild inherits the write side of the pipe. The
grandparent hangs reading from the pipe, since nothing ever writes to
it. If, when GDB kills the child, it also kills the grandchild, then
the grandparent's pipe read returns 0/EOF and the test passes.
Otherwise, if GDB doesn't kill the grandchild, then the pipe read
never returns and the test times out, like:
FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=kill: fork: kill parent (timeout)
FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=kill: vfork: kill parent (timeout)
No regressions on x86_64 Fedora 20. New test passes with gdbserver as
well.
gdb/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR gdb/19494
* linux-nat.c (kill_one_lwp): New, factored out from ...
(kill_callback): ... this.
(kill_wait_callback): New, factored out from ...
(kill_wait_one_lwp): ... this.
(kill_unfollowed_fork_children): New function.
(linux_nat_kill): Use it.
gdb/testsuite/ChangeLog:
2016-01-25 Pedro Alves <palves@redhat.com>
PR gdb/19494
* gdb.base/catch-fork-kill.c: New file.
* gdb.base/catch-fork-kill.exp: New file.
These two tests collect 64 words from $sp onwards, hoping that's enough
to capture a few whole stack frames. Unfortunately, that's not enough
for s390, which tends to have large frame sizes - minimum 24 words on
s390, 20 on s390x (which just barely passes). Bump it to 128 words,
let's hope no machine needs more.
Tested on x86_64, s390, s390x.
gdb/testsuite/ChangeLog:
* gdb.trace/backtrace.exp: Bump stack collection fudge factor.
* gdb.trace/entry-values.exp: Bump stack collection fudge factor.
The test constructs fake DWARF info for a C structure involving bitfields.
DWARF bitfields are always counted from LSB, while the order in which
bitfields are allocated in a C struct depends on the target endianness -
thus the generated DWARF marks different bitfields as unavailable when
target is big endian. Accordingly, we need different expected outputs.
Tested on s390 and s390x, no regression on x86_64.
gdb/testsuite/ChangeLog:
* gdb.trace/unavailable-dwarf-piece.exp: Fix bitfield handling on big
endian targets.
Missed one message in bd0a71fa16, since it
didn't trigger on s390x or amd64 (fast tracepoint out of range due to
shared library usage), noticed on s390.
Pushed as obvious.
gdb/testsuite/ChangeLog:
* gdb.trace/pending.exp: Fix expected message on continue.
Pedro Alves:
Looks like you forgot to amend before pushing though -- the version
checked in still had "Thread 1".
gdb/testsuite/ChangeLog
2016-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
Fix testsuite compatibility with Guile.
* gdb.gdb/selftest.exp (send ^C to child process): Drop expected Thread
number.
The PR threads/19422 patchset added a new regression.
Additionally below it there was already a regression if --with-guile (which is
default if Guile is found) was used.
racy case #1:
(xgdb) PASS: gdb.gdb/selftest.exp: Set xgdb_prompt
^M
Thread 1 "xgdb" received signal SIGINT, Interrupt.^M
0x00007ffff583bfdd in poll () from /lib64/libc.so.6^M
(gdb) FAIL: gdb.gdb/selftest.exp: send ^C to child process
signal SIGINT^M
Continuing with signal SIGINT.^M
^C^M
Thread 1 "xgdb" received signal SIGINT, Interrupt.^M
0x00007ffff5779da0 in sigprocmask () from /lib64/libc.so.6^M
(gdb) PASS: gdb.gdb/selftest.exp: send SIGINT signal to child process
backtrace^M
errstring=errstring@entry=0x7e0e6c "", mask=mask@entry=RETURN_MASK_ALL) at exceptions.c:240^M
errstring=errstring@entry=0x7e0e6c "", mask=mask@entry=RETURN_MASK_ALL) at exceptions.c:240^M
(gdb) PASS: gdb.gdb/selftest.exp: backtrace through signal handler
racy case #2:
(xgdb) PASS: gdb.gdb/selftest.exp: Set xgdb_prompt
^M
Thread 1 "xgdb" received signal SIGINT, Interrupt.^M
0x00007ffff583bfdd in poll () from /lib64/libc.so.6^M
(gdb) FAIL: gdb.gdb/selftest.exp: send ^C to child process
signal SIGINT^M
Continuing with signal SIGINT.^M
^C^M
Thread 2 "xgdb" received signal SIGINT, Interrupt.^M
[Switching to Thread 0x7ffff3b7f700 (LWP 13227)]^M
0x00007ffff6b88b10 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0^M
(gdb) PASS: gdb.gdb/selftest.exp: send SIGINT signal to child process
backtrace^M
(gdb) FAIL: gdb.gdb/selftest.exp: backtrace through signal handler
Pedro Alves:
Not all targets support thread names, and even those that do, not all
use the program name as default thread name -- I think that's only true
for GNU/Linux, actually. So I think it's best to not expect that, like:
-re "(Thread .*|Program) received signal SIGINT.*$gdb_prompt $" {
gdb/testsuite/ChangeLog
2016-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix testsuite compatibility with Guile.
* gdb.gdb/selftest.exp (send ^C to child process): Accept also Thread.
(thread 1): New test for backtrace through signal handler.
The prior format led to confusing messages when threads were created
or added such as "[New process 14757, LWP 100537]". The new format
reports this as "[New LWP 100434 of process 15652]".
gdb/ChangeLog:
* fbsd-nat.c (fbsd_pid_to_str): Adjust string format.
Noticed and tested on 31-bit s390. This bug caused completely broken
fast tracepoints.
gdb/gdbserver/ChangeLog:
* tracepoint.c (write_inferior_data_ptr): Cast to uintptr_t, so that
it works properly on big-endian machines where sizeof (CORE_ADDR)
!= sizeof (void *).
This patch unbuffer the output of the program so that the test harness
can count the number of "done" from output correctly.
gdb/testsuite:
2016-01-22 Yao Qi <yao.qi@linaro.org>
PR testsuite/19491
* gdb.base/multi-forks.c: Include
../lib/unbuffer_output.c
(main): Call gdb_unbuffer_output.
I see the following test fail on native arm-linux gdb testing...
(gdb) PASS: gdb.base/killed-outside.exp: registers: get pid of inferior
Executing on target: kill -9 2346 (timeout = 300)
spawn kill -9 2346^M
flushregs^M
Register cache flushed.^M
warning: Unable to fetch general registers.^M
PC not available^M
(gdb) PASS: gdb.base/killed-outside.exp: registers: flushregs
info threads^M
Id Target Id Frame ^M
* 1 process 2346 "killed-outside" (gdb) FAIL: gdb.base/killed-outside.exp: registers: info threads (timeout)
since the inferior disappeared, ptrace will fail. In that case, the
exception should be thrown, so that the caller can handle that.
gdb:
2016-01-22 Yao Qi <yao.qi@linaro.org>
* arm-linux-nat.c (fetch_fpregs): Call perror_with_name
instead of warning.
(store_fpregs, fetch_regs, store_regs): Likewise.
(fetch_wmmx_regs, store_wmmx_regs): Likewise.
(fetch_vfp_regs, store_vfp_regs): Likewise.
String collection always used ref32 to fetch the string pointer. Make it
use gen_fetch instead.
As a side effect, this patch changes dup+const+trace+pop sequence used
for collecting the string's address to a trace_quick opcode. This
results in a shorter agent expression.
This appeared to work on x86_64 since it's a little-endian platform, and
malloc (used in gdb.trace/collection.exp) returns addresses in low 4GB.
Noticed and tested on s390x-ibm-linux-gnu, also tested on
i686-unknown-linux-gnu and x86_64-unknown-linux-gnu.
gdb/ChangeLog:
* ax-gdb.c (gen_traced_pop): Use gen_fetch for string collection.
Give the function a better name (drop "maybe_") and update the header
comment.
gdb/ChangeLog:
* disasm.c (maybe_add_dis_line_entry): Rename to...
(add_dis_line_entry): ...this, and update header comment.
(do_mixed_source_and_assembly): Now use add_dis_line_entry.
Currently, even when built with --enable-build-with-cxx, gdb uses
CFLAGS instead of CXXFLAGS. This commit fixes it.
CXXFLAGS set in the environment when configure was run is now honored
in the generated gdb/Makefile, and you can also override CXXFLAGS in
the command like at make time, with the usual 'make CXXFLAGS="..."'
Objects built with a C compiler (e.g., gnulib) still honor CFLAGS
instead.
gdb/ChangeLog:
2016-01-21 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER_CFLAGS): New.
(CXXFLAGS): Get it from configure.
(INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
instead of CFLAGS.
* build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
COMPILER_CFLAGS.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-01-21 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER_CFLAGS, CXXFLAGS): New.
(INTERNAL_CFLAGS_BASE): Use COMPILER_CFLAGS instead of CFLAGS.
* configure: Regenerate.
A relatively recent patch support for explicit locations, and part
of that patch cleaned up the way we parse breakpoint locations.
Unfortunatly, a small regression crept in for "*<EXPR>" breakpoint
locations. In particular, on PIE programs, one can see the issue by
doing the following, with any program:
(gdb) b *main
Breakpoint 1 at 0x51a: file hello.c, line 3.
(gdb) run
Starting program: /[...]/hello
Error in re-setting breakpoint 1: Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x51a
Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x51a
Just for the record, this regression was introduced by:
commit a06efdd6ef
Date: Tue Aug 11 17:09:35 2015 -0700
Subject: Explicit locations: introduce address locations
What happens is that the patch makes the implicit assumption that
the address computed the first time is static, as if it was designed
to only support litteral expressions (Eg. "*0x1234"). This allows
the shortcut of not re-computing the breakpoint location's address
when re-setting breakpoints.
However, this does not work in general, as demonstrated in the example
above.
This patch plugs that hole simply by saving the original expression
used to compute the address as part of the address location, so as
to then re-evaluate that expression during breakpoint re-set.
gdb/ChangeLog:
* location.h (new_address_location): Add new parameters
"addr_string" and "addr_string_len".
(get_address_string_location): Add declaration.
* location.c (new_address_location): Add new parameters
"addr_string" and "addr_string_len". If not NULL, store
a copy of the addr_string in the new location as well.
(get_address_string_location): New function.
(string_to_event_location): Update call to new_address_location.
* linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
Save the event location in the parser's state before
passing it to convert_address_location_to_sals.
* breakpoint.c (create_thread_event_breakpoint): Update call
to new_address_location.
(init_breakpoint_sal): Get the event location's string, if any,
and use it to update call to new_address_location.
* python/py-finishbreakpoint.c (bpfinishpy_init):
Update call to new_address_location.
* spu-tdep.c (spu_catch_start): Likewise.
* config/djgpp/fnchange.lst: Add entries for
gdb/testsuite/gdb.base/break-fun-addr1.c and
gdb/testsuite/gdb.base/break-fun-addr2.c.
gdb/testsuite/ChangeLog:
* gdb.base/break-fun-addr.exp: New file.
* gdb.base/break-fun-addr1.c: New file.
* gdb.base/break-fun-addr2.c: New file.
This patch fixes the following regression introduced by commit d0e59a68
step^M
39 } /* handler */^M
1: x/i $pc^M
=> 0x8740 <handler+80>: sub sp, r11, #0^M
(gdb) step^M
^M
Program received signal SIGSEGV, Segmentation fault.^M
setitimer () at ../sysdeps/unix/syscall-template.S:81^M
81 ../sysdeps/unix/syscall-template.S: No such file or directory.^M
1: x/i $pc^M
=> 0xb6eff9c0 <setitimer>: push {r7}^M
(gdb) FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: leave handler
in my test setting, program is compiled in arm mode, but the glibc
is built in thumb mode, so when we do 'step' to step over syscall
instruction svc for SIGRETURN, GDB should set breakpoint for arm mode
in the program, even though the current program in glibc is in thumb
mode. Current GDB doesn't consider the case that the mode of program
SIGRETURN goes to can be different from current program mode.
In fact, GDB has taken care of this arm/thumb mode changes already,
see
/* Copy the value of next pc of sigreturn and rt_sigrturn into PC,
return 1. In addition, set IS_THUMB depending on whether we
will return to ARM or Thumb code. Return 0 if it is not a
rt_sigreturn/sigreturn syscall. */
static int
arm_linux_sigreturn_return_addr (struct frame_info *frame,
unsigned long svc_number,
CORE_ADDR *pc, int *is_thumb)
but in the commit d0e59a68
> - arm_linux_sigreturn_return_addr (frame, svc_number, &return_addr, &is_thumb);
> + if (svc_number == ARM_SIGRETURN || svc_number == ARM_RT_SIGRETURN)
> + next_pc = arm_linux_sigreturn_next_pc (regcache, svc_number);
the IS_THUMB setting is lost, so it is a regression.
gdb:
2016-01-21 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
is_thumb and set it according to CPSR saved on the stack.
(arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
arm_linux_sigreturn_next_pc.
gdb/gdbserver:
2016-01-21 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_sigreturn_next_pc): Add parameter
is_thumb and set it according to CPSR saved on the stack.
(get_next_pcs_syscall_next_pc): Pass is_thumb to
arm_sigreturn_next_pc.
The lambda function used to sort the enumerator list does not work
properly. This list consists of tuples, (enum label, enum value). The
key function returns x.enumval. enumval not being defined for a tuple,
we see this exception in the test log:
Python Exception <class 'AttributeError'> 'tuple' object has no attribute 'enumval'
The function should return the second item of the tuple, which is the
enumval.
The pretty-printer still worked mostly correctly, except that the
enumeration values were not sorted. The test still passed because the
enumeration values are already sorted where they are defined. The test
also passed despite the exception being printed, because the right output
was printed after the exception:
print (enum flag_enum) (FLAG_1)
Python Exception <type 'exceptions.AttributeError'> 'tuple' objecthas no attribute 'enumval':M
$7 = 0x1 [FLAG_1]
(gdb) PASS: gdb.python/py-pp-maint.exp: print FLAG_1
New in v2:
- Improved test case, I stole Pedro's example directly. It verifies
that the sorting of enumerators by value works, by checking that
printing FOO_MASK appears as FOO_1 | FOO_2 | FOO_3.
I noticed that I could change the regexps to almost anything and the
tests would still pass. I think it was because of the | in there. I
made them more robust by using string_to_regexp. I used curly braces
{ } instead of quoting marks " " for strings, so that I could use
square brackets [ ] in them without having to escape them all. I also
removed the "message" part of the tests, since they are redundant with
the command, and it's just more maintenance to have to update them.
Tested with Python 2.7 and 3.5.
gdb/ChangeLog:
* python/lib/gdb/printing.py (FlagEnumerationPrinter.__call__):
Fix enumerators sort key function.
gdb/testsuite/ChangeLog:
* gdb.python/py-pp-maint.exp: Change/add enum flag tests.
* gdb.python/py-pp-maint.c (enum flag_enum): Use more complex
enum flag values.
The gnu_vector test case yields a new FAIL on s390x:
FAIL: gdb.base/gnu_vector.exp: verify vector return value
It was introduced by commit 77ae9c1933 "gdb.base/gnu_vector.exp:
Don't test output from the inferior". That commit dropped the special
handling for GDB's inability (on some targets) to set the return value.
This change re-establishes the logic from before, converting the above
FAIL to a KFAIL (PRMS gdb/8549).
gdb/testsuite/ChangeLog:
* gdb.base/gnu_vector.exp: Re-establish handling for should_kfail
when GDB can not set the vector return value. Add more comments
for clarification.
On Ubuntu 14.04 the following failure would be seen when running the
tspeed.exp test on a target that supports fast tracepoints like x86_64:
Target returns error code '.In-process agent library not loaded in
process. Fast and static tracepoints unavailable.'.
(gdb) FAIL: gdb.trace/tspeed.exp: start trace experiment
This is because the default is to link with --as-needed and the
gdb_compile for the test is using the libs argument instead of shlib which
corrects this issue since 6ebea266fd by
adding -Wl,--no-as-needed.
This patch fixes the issue by passing the lib as the shlib argument to
gdb_compile.
Tested on Ubuntu 14.04 x86_64.
gdb/testsuite/ChangeLog:
* gdb.trace/tspeed.exp: Use shlib instead of libs in gdb_compile
command.
(GNU Coding Standard...)
gdb/ChangeLog:
* printcmd.c (print_scalar_formatted): move binary operator from
end of line to beginning of next line. Adjust formatting
accordingly.
gdb/ChangeLog:
* fbsd-tdep.c (find_stop_signal): Remove.
(struct fbsd_collect_regset_section_cb) <lwp>: New field.
<stop_signal>: New field.
<abort_iteration>: New field.
(fbsd_collect_regset_section_cb): Use new fields.
(fbsd_collect_thread_registers): New function.
(struct fbsd_corefile_thread_data): New structure.
(fbsd_corefile_thread): New function.
(fbsd_make_corefile_notes): Use new function to dump notes for each
non-exited thread in a process.
Older versions of FreeBSD supported userland threading via a pure
user-space threading library (N threads scheduled on 1 process) and
a N:M model (N threads scheduled on M LWPs). However, modern FreeBSD
versions only support a M:M threading model where each user thread is
backed by a dedicated LWP. This thread target only supports this
threading model. It also uses ptrace to query and alter LWP state
directly rather than using libthread_db to simplify the implementation.
FreeBSD recently gained support for reporting LWP events (birth and death
of LWPs). GDB will use LWP events when present. For older systems it
fetches the list of LWPs in the to_update_thread_list target op to update
the list of threads on each stop.
This target supports scheduler locking by using ptrace to suspend
individual LWPs as necessary before resuming a process.
gdb/ChangeLog:
* configure.ac: Check for support for LWP names on FreeBSD.
* fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
[TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
(fbsd_fetch_kinfo_proc): Move function earlier.
[PT_LWPINFO] (fbsd_thread_alive): New function.
[PT_LWPINFO] (fbsd_pid_to_str): New function.
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
[PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
[PT_LWPINFO] (fbsd_add_threads): New function.
[PT_LWPINFO] (fbsd_update_thread_list): New function.
[PT_LWPINFO] New variable super_resume.
[PT_LWPINFO] (resume_one_thread_cb): New function.
[PT_LWPINFO] (resume_all_threads_cb): New function.
[PT_LWPINFO] (fbsd_resume): New function.
(fbsd_remember_child): Save full ptid instead of plain pid.
(fbsd_is_child_pending): Return ptid of saved child process.
(fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
first stop.
[PT_LWP_EVENTS] Handle LWP events.
[TDP_RFPPWAIT] Include LWP in child ptid.
(fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
(fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
Add threads for existing processes.
(fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
"fbsd_thread_alive".
Set "to_pid_to_str" to "fbsd_pid_to_str".
[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
"fbsd_thread_name".
[PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
Set "to_has_thread_control" to "tc_schedlock".
Set "to_resume" to "fbsd_resume".
(_initialize_fbsd_nat): New function.
* configure: Regenerate.
* config.in: Regenerate.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging Output): Document "set/show debug fbsd-lwp".
This allows gdb to fetch per-thread registers for multi-threaded FreeBSD
processes.
Export get_ptrace_pid() from inf-ptrace.c and use it to determine the PID
to pass to ptrace in pan-BSD native targets. NetBSD and OpenBSD also accept
LWP IDs for ptrace requests to fetch per-thread state.
gdb/ChangeLog:
* amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Use
get_ptrace_pid.
(amd64bsd_store_inferior_registers): Use get_ptrace_pid.
(amd64bsd_dr_get): Use get_ptrace_pid.
(amd64bsd_dr_set): Use get_ptrace_pid.
* i386bsd-nat.c (i386bsd_fetch_inferior_registers): Use get_ptrace_pid.
(i386bsd_store_inferior_registers): Use get_ptrace_pid.
(i386bsd_dr_get): Use get_ptrace_pid.
(i386bsd_dr_set): Use get_ptrace_pid.
* inf-ptrace.c (get_ptrace_pid): Export.
* inf-ptrace.h (get_ptrace_pid): Declare.
* ppcfbsd-nat.c (ppcfbsd_fetch_inferior_registers): Use lwp id.
(ppcfbsd_store_inferior_registers): Use lwp id.
Display the LWP ID of each thread in a FreeBSD core. Extract thread
names from the per-thread THRMISC note.
gdb/ChangeLog:
* fbsd_tdep.c (fbsd_core_pid_to_str): New function.
(fbsd_core_thread_name): New function.
(fbsd_init_abi): Add "core_pid_to_str" gdbarch method.
Add "core_thread_name" gdbarch method.
Add a new gdbarch method to extract a thread name from a core for a
given thread. Use this new method in core_thread_name to implement the
to_thread_name target op.
gdb/ChangeLog:
* corelow.c (core_thread_name): New function.
(init_core_ops): Use "core_thread_name" for the "to_thread_name"
target op.
* gdbarch.sh (core_thread_name): New gdbarch callback.
* gdbarch.h: Re-generate.
* gdbarch.c: Re-generate.
Using Python 3.5 (I assume it's the same with 3.4 and lower, but I didn't
test), I see this:
print (enum flag_enum) (FLAG_1)^M
Python Exception <class 'TypeError'> %x format: an integer is required, not gdb.Value: ^M
$7 = ^M
(gdb) FAIL: gdb.python/py-pp-maint.exp: print FLAG_1
Apparently, this idiom, where v is a gdb.Value, was possible with Python 2,
but not with Python 3:
'%x' % v
In Python 2, it would automatically get converted to an integer. To solve
it, I simply added wrapped v in a call to int().
'%x' % int(v)
In Python 2, the int type is implemented with a "long" in C, so on x86-32 it's
32-bits. I was worried that doing int(v) would truncate the value and give
wrong results for enum values > 32-bits. However, the int type != the int
function. The int function does the right thing, selecting the right integer
type for the given value. I tested with large enum values on x86-32 and
Python 2, and everything works as expected.
gdb/ChangeLog:
* python/lib/gdb/printing.py (_EnumInstance.to_string): Explicitly
convert gdb.Value to integer type using int().
By default, if a test driver (a test .exp) ends with an uncaught
error/exception, the runtest command will still have a return code of 0
(success). However, if a test (or the environment) is broken and does
not work properly, it should be considered as failed so that we can
notice it and fix it.
Passing the --status flag to runtest will make it return an error if one
of the test it runs ends up with an uncaught error.
gdb/testsuite/ChangeLog:
* Makefile.in (check-single): Pass --status to runtest.
(check/%.exp): Likewise.
When using the check-parallel target, the return code of make is always 0,
regardless of test results. This patch makes it return the same code as
the "make do-check-parallel" sub-command. So if there is a FAIL somewhere,
non-zero will be returned by make.
For the sake of example, I introduced a failure in gdb.base/break.exp.
$ make check-single TESTS="gdb.base/break.exp gdb.python/py-value.exp" && echo 'Success :D' || echo 'Fail :('
...
FAIL: gdb.base/break.exp: allo
...
Fail :(
I think the parallel run should do the same. Currently:
$ make check-parallel TESTS="gdb.base/break.exp gdb.python/py-value.exp" && echo 'Success :D' || echo 'Fail :('
...
FAIL: gdb.base/break.exp: allo
...
Success :D
And with the patch (no big surprises there):
$ make check-parallel TESTS="gdb.base/break.exp gdb.python/py-value.exp" && echo 'Success :D' || echo 'Fail :('
...
FAIL: gdb.base/break.exp: allo
...
Fail :(
What do you think?
gdb/testsuite/ChangeLog:
* Makefile.in (check-parallel): Propagate return code from make
do-check-parallel.
Include <sys/types.h> as a prerequisite for <machine/reg.h> when checking
for the r_fs and r_gs members in struct reg. Note that the previous test
for <machine/reg.h> already includes <sys/types.h> as a prerequisite.
gdb/ChangeLog:
* configure.ac: Include <sys/types.h when checking for "r_fs" in
"struct reg".
* configure: Regenerate.
Currently, we always re-set all locations of all breakpoints. This
commit makes us re-set only locations of the current program space.
If we loaded symbols to a program space (e.g., "file" command or some
shared library was loaded), GDB must run through all breakpoints and
determine if any new locations need to be added to the breakpoint.
However, there's no reason to recreate locations for _other_ program
spaces, as those haven't changed.
Similarly, when we create a new inferior, through e.g., a fork, GDB
must run through all breakpoints and determine if any new locations
need to be added to the breakpoint. There's no reason to destroy the
locations of the parent inferior and other inferiors. We know those
won't change.
In addition to being inneficient, resetting breakpoints of inferiors
that are currently running is problematic, because:
- some targets can't read memory while the inferior is running.
- the inferior might exit while we're re-setting its breakpoints,
which may confuse prologue skipping.
I went through all the places where we call breakpoint_re_set, and it
seems to me that all can be changed to only re-set locations of the
current program space.
The patch that reversed threads order in "info threads" etc. happened
to make gdb.threads/fork-plus-thread.exp expose this problem when
testing on x86/-m32. The problem was latent and masked out by chance
by the code-cache:
https://sourceware.org/ml/gdb-patches/2016-01/msg00213.html
Tested on x86-64 F20, native (-m64/-m32) and extended-remote
gdbserver.
Fixes the regression discussed in the url above with --target_board=unix/-m32:
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left (timeout)
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left (the program exited)
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
gdb/ChangeLog:
2016-01-19 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
* break-catch-throw.c (re_set_exception_catchpoint): Pass the
current program space down to linespec decoding and breakpoint
location updating.
* breakpoint.c (parse_breakpoint_sals): Adjust calls to
decode_line_full.
(until_break_command): Adjust calls to decode_line_1.
(base_breakpoint_decode_location, bkpt_decode_location): Add
'search_pspace' parameter. Pass it along.
(bkpt_probe_create_sals_from_location): Adjust calls to
parse_probes.
(tracepoint_decode_location, tracepoint_probe_decode_location)
(strace_marker_decode_location): Add 'search_pspace' parameter.
Pass it along.
(all_locations_are_pending): Rewrite to take a breakpoint and
program space as arguments instead.
(hoist_existing_locations): New function.
(update_breakpoint_locations): Add 'filter_pspace' parameter. Use
hoist_existing_locations instead of always removing all locations,
and adjust to all_locations_are_pending change.
(location_to_sals): Add 'search_pspace' parameter. Pass it along.
Don't disable the breakpoint if there are other locations in
another program space.
(breakpoint_re_set_default): Adjust to pass down the current
program space as filter program space.
(decode_location_default): Add 'search_pspace' parameter and pass
it along.
(prepare_re_set_context): Don't switch program space here.
(breakpoint_re_set): Use save_current_space_and_thread instead of
save_current_program_space.
* breakpoint.h (struct breakpoint_ops) <decode_location>: Add
'search_pspace' parameter.
(update_breakpoint_locations): Add 'filter_pspace' parameter.
* cli/cli-cmds.c (edit_command, list_command): Adjust calls to
decode_line_1.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
program space as filter program space.
* linespec.c (struct linespec_state) <search_pspace>: New field.
(create_sals_line_offset, convert_explicit_location_to_sals)
(parse_linespec): Pass the search program space down.
(linespec_state_constructor): Add 'search_pspace' parameter.
Store it.
(linespec_parser_new): Add 'search_pspace' parameter and pass it
along.
(linespec_lex_to_end): Adjust.
(decode_line_full, decode_line_1): Add 'search_pspace' parameter
and pass it along.
(decode_line_with_last_displayed): Adjust.
(collect_symtabs_from_filename, symtabs_from_filename): New
'search_pspace' parameter. Use it.
(find_function_symbols): Pass the search program space down.
* linespec.h (decode_line_1, decode_line_full): Add
'search_pspace' parameter.
* probe.c (parse_probes_in_pspace): New function, factored out
from ...
(parse_probes): ... this. Add 'search_pspace' parameter and use
it.
* probe.h (parse_probes): Add pspace' parameter.
* python/python.c (gdbpy_decode_line): Adjust.
* tracepoint.c (scope_info): Adjust.
This is fallout from f303dbd60d.
The testcases themselves are single-threaded, but they load the IPA library,
which injects a thread in the inferior - making them multithreaded.
This results in printing the thread numbers in breakpoint messages.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Fix expected message on continue.
* gdb.trace/pending.exp: Fix expected message on continue.
* gdb.trace/trace-break.exp: Fix expected message on continue.
The POOL48A major opcode was defined in early revisions of the 64-bit
microMIPS ISA, has never been implemented, and was removed before the
64-bit microMIPS ISA specification[1] has been finalized.
This complements commit a6c7053929 ("MIPS/opcodes: Remove microMIPS
48-bit LI instruction").
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 3.06, October 17, 2012, Table 6.2 "microMIPS64 Encoding of
Major Opcode Field", p. 578
gas/
* config/tc-mips.c (micromips_insn_length): Remove the mention
of 48-bit microMIPS instructions.
gdb/
* mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
instruction support.
(micromips_next_pc): Likewise.
(micromips_scan_prologue): Likewise.
(micromips_deal_with_atomic_sequence): Likewise.
(micromips_stack_frame_destroyed_p): Likewise.
(mips_breakpoint_from_pc): Likewise.
opcodes/
* mips-dis.c (print_insn_micromips): Remove 48-bit microMIPS
instruction support.
Fix a bug in `micromips_insn_at_pc_has_delay_slot' in instruction size
determination via `mips_insn_size'. In the microMIPS case the latter
function expects a lone 16-bit instruction word containing the major
opcode regardless of whether the opcode requires another 16-bit word to
follow, to form a complete 32-bit instruction. Code however passes the
16-bit word previously retrieved shifted left by 16 bits. Consequently
`mips_insn_size', which examines the low 16-bit only, always sees 0.
By pure coincidence a major opcode of 0 denotes a 32-bit instruction in
the microMIPS instruction set, so the size of 4 is always returned here,
and the following 16-bit word is then merged in the low 16 bits of the
instruction previously shifted by 16 bits. The resulting 32-bit value
is then passed to `micromips_instruction_has_delay_slot' for delay slot
presence determination. This function in turn first examines the high
16 bits of the instruction word received and ignores the low 16 bits for
16-bit instructions.
Consequently the only effect of this bug is an extraneous memory read
issued to retrieve a subsequent 16-bit word where a 16-bit instruction
is being examined. Which in turn may fail if the instruction is located
right at the end of a readable memory area, in which case the lack of a
delay slot will be reported to the caller, which may be incorrect.
This code is used in breakpoint maintenance, for delay slot avoidance,
so the bug would only trigger for the unlikely case of someone placing
a breakpoint in a delay slot of an instruction which is at the end of
readable memory. Which explains why the bug remained unnoticed so long.
gdb/
* mips-tdep.c (micromips_insn_at_pc_has_delay_slot): Pass
unshifted 16-bit microMIPS instruction word to `mips_insn_size'.
Those are unused since gdb_test_multiple was added, factoring out most
of the content of gdb_test.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_test): Remove unused global references.
This commit changes GDB like this:
- Program received signal SIGINT, Interrupt.
+ Thread 1 "main" received signal SIGINT, Interrupt.
- Breakpoint 1 at 0x40087a: file threads.c, line 87.
+ Thread 3 "bar" hit Breakpoint 1 at 0x40087a: file threads.c, line 87.
... once the program goes multi-threaded. Until GDB sees a second
thread spawn, the output is still the same as before, per the
discussion back in 2012:
https://www.sourceware.org/ml/gdb/2012-11/msg00010.html
This helps non-stop mode, where you can't easily tell which thread hit
a breakpoint or received a signal:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 19362) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 19366) "foo" (running)
3 Thread 0x7ffff77bf700 (LWP 19367) "bar" (running)
(gdb)
Program received signal SIGUSR1, User defined signal 1.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
(gdb) b threads.c:87
Breakpoint 1 at 0x40087a: file threads.c, line 87.
(gdb)
Breakpoint 1, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
The best the user can do is run "info threads" and try to figure
things out.
It actually also affects all-stop mode, in case of "handle SIG print
nostop":
...
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
Program received signal SIGUSR1, User defined signal 1.
...
The above doesn't give any clue that these were different threads
getting the SIGUSR1 signal.
I initially thought of lowercasing "breakpoint" in
"Thread 3 hit Breakpoint 1"
but then after trying it I realized that leaving "Breakpoint"
uppercase helps the eye quickly find the relevant information. It's
also easier to implement not showing anything about threads until the
program goes multi-threaded this way.
Here's a larger example session in non-stop mode:
(gdb) c -a&
Continuing.
(gdb) interrupt -a
(gdb)
Thread 1 "main" stopped.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
Thread 2 "foo" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
Thread 3 "bar" stopped.
0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
b threads.c:87
Breakpoint 4 at 0x40087a: file threads.c, line 87.
(gdb) b threads.c:67
Breakpoint 5 at 0x400811: file threads.c, line 67.
(gdb) c -a&
Continuing.
(gdb)
Thread 3 "bar" hit Breakpoint 4, thread_function1 (arg=0x1) at threads.c:87
87 usleep (1); /* Loop increment. */
Thread 2 "foo" hit Breakpoint 5, thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" (running)
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) shell kill -SIGINT 31957
(gdb)
Thread 1 "main" received signal SIGINT, Interrupt.
0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
92 lll_wait_tid (pd->tid);
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 31957) "main" 0x0000003616a09237 in pthread_join (threadid=140737353877248, thread_return=0x7fffffffd5b8) at pthread_join.c:92
2 Thread 0x7ffff7fc0700 (LWP 31961) "foo" thread_function0 (arg=0x0) at threads.c:68
3 Thread 0x7ffff77bf700 (LWP 31962) "bar" thread_function1 (arg=0x1) at threads.c:87
(gdb) t 2
[Switching to thread 2, Thread 0x7ffff7fc0700 (LWP 31961)]
#0 thread_function0 (arg=0x0) at threads.c:68
68 (*myp) ++;
(gdb) catch syscall
Catchpoint 6 (any syscall)
(gdb) c&
Continuing.
(gdb)
Thread 2 "foo" hit Catchpoint 6 (call to syscall nanosleep), 0x0000003615ebc6ed in nanosleep () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
I'll work on documentation next if this looks agreeable.
This patch applies on top of the star wildcards thread IDs series:
https://sourceware.org/ml/gdb-patches/2016-01/msg00291.html
For convenience, I've pushed this to the
users/palves/show-which-thread-caused-stop branch.
gdb/doc/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Mention that GDB displays the ID and name
of the thread that hit a breakpoint or received a signal.
gdb/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* NEWS: Mention that GDB now displays the ID and name of the
thread that hit a breakpoint or received a signal.
* break-catch-sig.c (signal_catchpoint_print_it): Use
maybe_print_thread_hit_breakpoint.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
(print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
(print_it_catch_exec, print_it_ranged_breakpoint)
(print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
Use maybe_print_thread_hit_breakpoint.
* breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
* gdbthread.h (show_thread_that_caused_stop): Declare.
* infrun.c (print_signal_received_reason): Print which thread
received signal.
* thread.c (show_thread_that_caused_stop): New function.
gdb/testsuite/ChangeLog:
2016-01-18 Pedro Alves <palves@redhat.com>
* gdb.base/async-shell.exp: Adjust expected output.
* gdb.base/dprintf-non-stop.exp: Adjust expected output.
* gdb.base/siginfo-thread.exp: Adjust expected output.
* gdb.base/watchpoint-hw-hit-once.exp: Adjust expected output.
* gdb.java/jnpe.exp: Adjust expected output.
* gdb.threads/clone-new-thread-event.exp: Adjust expected output.
* gdb.threads/continue-pending-status.exp: Adjust expected output.
* gdb.threads/leader-exit.exp: Adjust expected output.
* gdb.threads/manythreads.exp: Adjust expected output.
* gdb.threads/pthreads.exp: Adjust expected output.
* gdb.threads/schedlock.exp: Adjust expected output.
* gdb.threads/siginfo-threads.exp: Adjust expected output.
* gdb.threads/signal-command-multiple-signals-pending.exp: Adjust
expected output.
* gdb.threads/signal-delivered-right-thread.exp: Adjust expected
output.
* gdb.threads/sigthread.exp: Adjust expected output.
* gdb.threads/watchpoint-fork.exp: Adjust expected output.
This patch is the follow-up of
https://sourceware.org/ml/gdb-patches/2016-01/msg00164.html to provide
linux_{get,set}_pc_64bit functions.
Rebuild GDBserver with tilegx-linux-gcc. Not tested.
I think about pc in Tile-GX a little bit. Looks current Tile-GX
supports debugging 32-bit program (multi-arch), but PC is always
64-bit. See this thread
https://sourceware.org/ml/gdb-patches/2013-02/msg00113.html
and GDBserver reads PC as 64-bit through ptrace. However, if
the inferior is 32-bit, the PC in the target description and
regcache is 32-bit, so only 32-bit contents are sent back GDB.
Anyway, Tile-GX GDBserver may have some problems here, but this
patch doesn't change anything.
gdb/gdbserver:
2016-01-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_set_pc_64bit): New function.
(linux_get_pc_64bit): New function.
* linux-low.h (linux_set_pc_64bit, linux_get_pc_64bit):
Declare.
* linux-sparc-low.c (debug_threads): Remove declaration.
(sparc_get_pc): Remove.
(the_low_target): Use linux_get_pc_64bit instead of
sparc_get_pc.
* linux-tile-low.c (tile_get_pc, tile_set_pc): Remove.
(the_low_target): Use linux_get_pc_64bit and
linux_set_pc_64bit.
This patch adds a pair of new functions linux_get_pc_32bit and
linux_set_pc_32bit which get and set 32-bit register "pc" from
regcache. This function can be used some targets and these own
$ARCH_{get,set}_pc are replaced by linux_{get,set}_pc_32bit
respectively.
This patch touches many targets, but I only have arm board to
test and no regression. I also rebuilt nios2-linux GDBserver.
If it is right to go, I'll post the 64-bit counterpart later.
gdb/gdbserver:
2016-01-18 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (debug_threads): Remove declaration.
(arm_get_pc, arm_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-bfin-low.c (bfin_get_pc, bfin_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-cris-low.c (debug_threads): Remove declaration.
(cris_get_pc, cris_set_pc,): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-crisv32-low.c (debug_threads): Remove declaration.
(cris_get_pc, cris_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-low.c: Include inttypes.h.
(linux_get_pc_32bit, linux_set_pc_32bit): New functions.
* linux-low.h (linux_get_pc_32bit, linux_set_pc_32bit): Declare.
* linux-m32r-low.c (m32r_get_pc, m32r_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-m68k-low.c (m68k_get_pc, m68k_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-nios2-low.c (nios2_get_pc, nios2_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-sh-low.c (sh_get_pc, sh_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
* linux-xtensa-low.c (xtensa_get_pc, xtensa_set_pc): Remove.
(the_low_target): Use linux_get_pc_32bit and
linux_set_pc_32bit.
The ARM assembler has "@" as a comment character, so there are compile
errors in {py,scm}-section-script.c,
gdb compile failed, /tmp/ccHEzYqy.s: Assembler messages:
/tmp/ccHEzYqy.s:19: Error: junk at end of line, first unrecognized character is `,'
/tmp/ccHEzYqy.s:24: Error: junk at end of line, first unrecognized character is `,'
/tmp/ccHEzYqy.s:29: Error: junk at end of line, first unrecognized character is `,'
/tmp/ccHEzYqy.s:41: Error: junk at end of line, first unrecognized character is `,'
This patch replaces @progbits with %progbits.
gdb/testsuite:
2016-01-18 Yao Qi <yao.qi@linaro.org>
* gdb.guile/scm-section-script.c: Replace @progbits with
%progbits.
* gdb.python/py-section-script.c: Likewise.
This commit fixes nat/linux-namespaces.c to build correctly on
targets without fork.
gdb/ChangeLog:
* nat/linux-namespaces.c (do_fork): New function.
(linux_mntns_get_helper): Use the above.
gdb/gdbserver/ChangeLog:
* configure.ac (AC_FUNC_FORK): New check.
* config.in: Regenerate.
* configure: Likewise.
This patch fixes a SIGSEGV when trying to open a Fortran program
compiled with ifort (reproduced using version using version 16.0.1.150).
The error can be reproduce with most, if not any program. For instance,
a single file only containing "end", compiled with no additional flag,
suffices.
gdb/ChangeLog:
PR gdb/19208
* dwarf2read.c (read_partial_die): Do not call set_objfile_main_name
if the function has no name.
2016-01-15 Sandra Loosemore <sandra@codesourcery.com>
gdb/
* charset.c [PHONY_ICONV] (GDB_DEFAULT_HOST_CHARSET):
Conditionalize for Windows host.
(GDB_DEFAULT_TARGET_CHARSET): Match GDB_DEFAULT_HOST_CHARSET.
(GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
(phony_iconv_open): Handle both UTF-32 endiannesses.
(phony_iconv): Likewise. Check for output overflow and clean up
out-of-input cases. Correct adjustment to input buffer pointer.
(set_be_le_names) [PHONY_ICONV]: Use hard-wired names to match
phony_iconv_open.
Add support for specifying "all threads of inferior N", by writing "*"
as thread number/range in thread ID lists.
E.g., "info threads 2.*" or "thread apply 2.* bt".
gdb/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* NEWS: Mention star wildcard ranges.
* cli/cli-utils.c (get_number_or_range): Check state->in_range first.
(number_range_setup_range): New function.
* cli/cli-utils.h (number_range_setup_range): New declaration.
* thread.c (thread_apply_command): Support star TID ranges.
* tid-parse.c (tid_range_parser_finished)
(tid_range_parser_string, tid_range_parser_skip)
(get_tid_or_range, get_tid_or_range): Handle
TID_RANGE_STATE_STAR_RANGE.
(tid_range_parser_star_range): New function.
* tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
New value.
(tid_range_parser_star_range): New declaration.
gdb/doc/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads) <thread ID lists>: Document star ranges.
gdb/testsuite/ChangeLog:
2016-01-15 Pedro Alves <palves@redhat.com>
* gdb.multi/tids.exp: Test star wildcard ranges.
Yao Qi
Marcin Kościelnicki
Bernhard Heckel
Pedro Alves
Andreas Arnez
Iain Buclaw
Keith Seitz
Joel Sherrill
Joel Sherrill
Doug Evans
Simon Marchi
Antoine Tremblay
Wei-cheng Wang
Gary Benson
Joel Brobecker
Jan Kratochvil
Walfred Tedeschi
Don Breazeal
Markus Metzger
Simon Marchi
Andrew Burgess
Kevin Buettner
John Baldwin
Mark Wielaard
Maciej W. Rozycki
Jonas Hahnfeld
Sandra Loosemore