This is the testsuite for the or1k sim, it tests running many of the
basic architecture instructions on the openrisc sim.
sim/testsuite/sim/or1k/ChangeLog:
2017-12-12 Peter Gavin <pgavin@gmail.com>
Stafford Horne <shorne@gmail.com>
* add.S: New file.
* alltests.exp: New file.
* and.S: New file.
* basic.S: New file.
* div.S: New file.
* ext.S: New file.
* find.S: New file.
* flag.S: New file.
* fpu.S: New file.
* jump.S: New file.
* load.S: New file.
* mac.S: New file.
* mfspr.S: New file.
* mul.S: New file.
* or.S: New file.
* or1k-asm-test-env.h: New file.
* or1k-asm-test-helpers.h: New file.
* or1k-asm-test.h: New file.
* or1k-asm.h: New file.
* or1k-test.ld: New file.
* ror.S: New file.
* shift.S: New file.
* spr-defs.h: New file.
* sub.S: New file.
* xor.S: New file.
sim/testsuite/ChangeLog:
2017-12-12 Stafford Horne <shorne@gmail.com>
Peter Gavin <pgavin@gmail.com>
* configure: Regenerated.
These are separted out to make the patch easier to read and smaller.
sim/ChangeLog:
2017-12-12 Stafford Horne <shorne@gmail.com>
Peter Gavin <pgavin@gmail.com>
* configure: Regenerated.
* or1k/aclocal.m4: Generated.
* or1k/config.in: Generated.
* or1k/configure: Generated.
These are the simulator files generated by cgen. These are split out
from the main sim patch to make the patch easier to review and smaller.
sim/ChangeLog:
2017-12-12 Stafford Horne <shorne@gmail.com>
Peter Gavin <pgavin@gmail.com>
* or1k/arch.c: Generated.
* or1k/arch.h: Generated.
* or1k/cpu.c: Generated.
* or1k/cpu.h: Generated.
* or1k/cpuall.h: Generated.
* or1k/decode.c: Generated.
* or1k/decode.h: Generated.
* or1k/model.c: Generated.
* or1k/sem-switch.c: Generated.
* or1k/sem.c: Generated.
This adds the OpenRISC 32-bit sim target. The OpenRISC sim is a CGEN
based sim so the bulk of the code is generated from the .cpu files by
CGEN. The engine decode and execute logic in mloop uses scache with
pseudo-basic-block extraction and supports both full and fast (switch)
modes.
The sim does not implement an mmu at the moment. The sim does implement
fpu instructions via the common sim-fpu implementation.
sim/ChangeLog:
2017-12-12 Stafford Horne <shorne@gmail.com>
Peter Gavin <pgavin@gmail.com>
* configure.tgt: Add or1k sim.
* or1k/README: New file.
* or1k/Makefile.in: New file.
* or1k/configure.ac: New file.
* or1k/mloop.in: New file.
* or1k/or1k-sim.h: New file.
* or1k/or1k.c: New file.
* or1k/sim-if.c: New file.
* or1k/sim-main.h: New file.
* or1k/traps.c: New file.
FT32B is a new FT32 family member.
This patch adds support for the compressed instructions to gdb and sim.
gdb/ChangeLog:
* ft32-tdep.c (ft32_fetch_instruction): New function.
(ft32_analyze_prologue): Use ft32_fetch_instruction().
sim/ChangeLog:
* ft32/interp.c (step_once): Add ft32 shortcode decoder.
FT32B is a new FT32 family member. It has a code
compression scheme, which requires the use of linker
relaxations. The change is quite large, so submission
is in several parts.
Part 1 adds a 15-bit instruction field, and CPU-specific functions for
the code compression that are used in binutils and GDB.
bfd/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-ft32.c: Add HOWTO R_FT32_15.
* reloc.c: Add BFD_RELOC_FT32_15.
gas/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with
K15.
(md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15.
include/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* elf/ft32.h: Add R_FT32_15.
* opcode/ft32.h: Replace FT32_FLD_K8 with K15.
(ft32_shortcode, sc_compar, ft32_split_shortcode,
ft32_merge_shortcode, ft32_merge_shortcode): New functions.
opcodes/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15.
* opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with
K15. Add jmpix pattern.
sim/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
This patch fixes the build failure by using disassembler to get
disassemble function pointer, and do the disassembly, because
print_insn_little_arm is no longer visible outside opcodes/
binutils-gdb/sim/arm/wrapper.c:98:10: error: implicit declaration of function 'print_insn_little_arm' [-Werror=implicit-function-declaration]
size = print_insn_little_arm (0, & info);
^
sim/arm:
2017-09-21 Yao Qi <yao.qi@linaro.org>
* wrapper.c (print_insn): Use disassembler instead of
print_insn_little_arm.
Previously this used the error function from GDB directly when linked
against GDB instead of the error method in the host callbacks
structure. This was exposed via a link error when GDB was converted
to C++. The error function invokes the error callback similar to
sim_io_error.
Note that there are also error functions in sim/ppc/main.c and
sim/ppc/misc.c. The ppc libsim.a expects each consumer to provide
several symbols used by the library including "error". sim-calls.c
provides these symbols when the library is linked into gdb. The dgen,
igen, tmp-filter, tmp-ld-decode, tmp-ld-cache, and tmp-ld-insn programs
use the functions from misc.c. psim uses the functions from main.c.
sim/ppc/ChangeLog:
PR sim/20863
* sim_calls.c (error): New function.
Nowadays, opcodes/disassemble.c:disassembler selects the proper
disassembler according to ABFD only. However, it actually
selects disassemblers according to arch, mach, endianess, and
abfd. This patch adds them to the parameters of disassembler,
so that its caller can still select disassemblers in case that
abfd is NULL (a typical case in GDB).
There isn't any functionality change.
binutils:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* objdump.c (disassemble_data): Caller update.
include:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (disassembler): Update declaration.
opcodes:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* disassemble.c (disassembler): Add arguments a, big and mach.
Use them.
sim/common:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* sim-trace.c (trace_disasm): Caller update.
sim/aarch64/
* simulator.c (vec_load): Add M argument. Rewrite to iterate over
registers based on structure size.
(LD4, LD3, LD2, LD1_2, LD1_3, LD1_4): Pass new arg to vec_load.
(LD1_1): Replace with call to vec_load.
(vec_store): Add new M argument. Rewrite to iterate over registers
based on structure size.
(ST4, ST3, ST2, ST1_2, ST1_3, ST1_4): Pass new arg to vec_store.
(ST1_1): Replace with call to vec_store.
sim/testsuite/sim/aarch64/
* fcvtz.s, fstur.s, ldn_single.s, ldnr.s, mla.s, mls.s, uzp.s: Align
data.
* sumulh.s: Delete unnecessary data alignment.
* stn_single.s: Align data. Fix unaligned ldr insns. Adjust cmp
arguments to match change.
* ldn_multiple.s, stn_multiple.s: New.
sim/aarch64/
* simulator.c (set_flags_for_add32): Cast result to uint32_t in carry
flag check.
sim/testsuite/sim/aarch64/
* adds.s: Add checks for values -2 and 1, where C is not set.
sim/aarch64/
* simulator.c (mul64hi): Shift carry left by 32.
(smulh): Change signum to negate. If negate, invert result, and add
carry bit if low part of multiply result is zero.
sim/testsuite/sim/aarch64/
* sumov.s: Correct compare test values.
* sumulh.s: New.
sim/aarch64/
* simulator.c (do_vec_ADDV): Mov val declaration inside each case,
with type set to input type size.
(do_vec_xtl): Change bias from 3 to 4 for byte case.
sim/testsuite/sim/aarch64/
* bit.s: Change cmp immediates to account for addv bug fix.
* cmtst.s, ldn_single.s, stn_single.s: Likewise.
* xtl.s: New.
sim/aarch64/
* simulator.c (do_vec_bit): Change loop limits from 16 and 8 to 4 and
2. Move test_false if inside loop. Fix logic for computing result
stored to vd.
sim/testsuite/sim/aarch64
* bit.s: New.
sim/aarch64/
* simulator.c: (LDn_STn_SINGLE_LANE_AND_SIZE): New.
(do_vec_LDn_single, do_vec_STn_single): New.
(do_vec_LDnR): Add and set new nregs var. Replace switch on nregs with
loop over nregs using new var n. Add n times size to address in loop.
Add n to vd in loop.
(do_vec_load_store): Add comment for instruction bit 24. New var
single to hold instruction bit 24. Add new code to use single. Move
ldnr support inside single if statements. Fix ldnr register counts
inside post if statement. Change HALT_NYI calls to HALT_UNALLOC.
sim/testsuite/sim/aarch64/
* ldn_single.s: New.
* ldnr.s: New.
* stn_single.s: New.
sim/aarch64/
* simulator.c (do_vec_ADDV): Call aarch64_set_vec_u64 instead of
aarch64_set_reg_u64. In case 2, call HALT_UNALLOC if not full. In
case 3, call HALT_UNALLOC unconditionally.
(do_vec_XTN): Delete shifts. In case 2, change index from i + 4 to
i + 2. Delete if on bias, change index to i + bias * X.
sim/testsuite/sim/aarch64/
* addv.s: New.
* xtn.s: New.
sim/aarch64/
* cpustate.c: Include math.h.
(aarch64_set_FP_float): Use signbit to check for signed zero.
(aarch64_set_FP_double): Likewise.
* simulator.c (do_vec_MOV_immediate, case 0x8): Add missing break.
(do_vec_mul): In all DO_VEC_WIDENING_MUL calls, make second and fourth
args same size as third arg.
(fmaxnm): Use isnan instead of fpclassify.
(fminnm, dmaxnm, dminnm): Likewise.
(do_vec_MLS): Reverse order of subtraction operands.
(dexSimpleFPCondSelect): Call aarch64_get_FP_double or
aarch64_get_FP_float to get source register contents.
(UINT_MIN, ULONG_MIN, FLOAT_UINT_MAX, FLOAT_UINT_MIN,
DOUBLE_UINT_MAX, DOUBLE_UINT_MIN, FLOAT_ULONG_MAX, FLOAT_ULONG_MIN,
DOUBLE_ULONG_MAX, DOUBLE_ULONG_MIN): New.
(do_fcvtzu): Use ULONG instead of LONG, and UINT instead of INT in
raise_exception calls.
sim/testsuite/sim/aarch64/
* fcsel.s: New.
* fcvtz.s: New.
* fminnm.s: New.
* mls.s: New.
* mul.s: New.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
sim/aarch64
* simulator.c (NEG, POS): Move before set_flags_for_add64.
(set_flags_for_add64): Replace with a modified copy of
set_flags_for_sub64.
sim/testsuite/sim/aarch64
* testutils.inc (pass): Move .Lpass to start.
(fail): Move .Lfail to start. Return 1 instead of 0.
(start): Moved .Lpass and .Lfail to here.
* adds.s: New.
* fstur.s: New.
* tbnz.s: New.
When building for mipstx39-rtems4.12 targets, some funcs use SD and CPU
implicitly. Restore the defines for these to the local sd and cpu vars.
This was broken by the clean up in commit d47f5b30d8.
Reported-by: Joel Sherrill <joel.sherrill@oarcorp.com>
The common sim tracing code already handles loading and tracking of
symbols from the target program so that it can show symbol info in
trace/disassembly calls. Once we touch up the trace code and add a
few API callbacks, ports don't need to do loading and searching of
symbol tables themselves anymore.
A few funcs are only used locally, so mark them static to avoid warnings
due to -Wmissing-prototypes.
Some funcs cast the return value wrong, so drop them (and let void * just
work by default).
Update some prototypes to be new style.