The element index range for the following MIPS MSA instructions: sldi, splati,
copy_s, copy_u, insert and insve is 1 bit too large. This patch fixes this issue.
ChangeLog:
gas/testsuite/gas/mips/
* msa.s: Reduced maximum element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* msa64.s: Likewise.
* micromips@msa.d: Likewise.
* micromips@msa64.d: Likewise.
* msa.d: Likewise.
* msa64.d: Likewise.
include/opcode/
* mips.h: Updated description of +o, +u, +v and +w for MIPS and
microMIPS.
opcodes/
* micromips-opc.c (decode_micromips_operand): Reduced range of +o, +u,
+v and +w.
(micromips_opcodes): Reduced element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* opcodes/mips-opc.c (decode_mips_operand): Reduced range of +o, +u,
+v and +w.
(mips_builtin_opcodes): Reduced element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
These files are source files and have no business being +x. We couldn't
easily fix it in CVS (you need login+write access to the raw rcs files),
but we can fix this w/git.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gas/
* config/tc-arm.c (arm_archs): New armv7ve architecture option.
(arm_cpus): Replace ARM_ARCH_V7A_IDIV_MP_SEC_VIRT with
ARM_ARCH_V7VE for cortex-a7, cortex-a12 and cortex-a15.
(cpu_arch_ver): Likewise.
* doc/c-arm.texi: Document armv7ve.
gas/testsuite/
* gas/arm/attr-march-armv7ve.d: New test case for armv7ve.
include/opcode/
* arm.h (ARM_AEXT_V7VE): New define.
(ARM_ARCH_V7VE): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC_VIRT): Removed.
* config/tc-aarch64.c (set_other_error): New function.
(parse_sys_reg): Add new parameter 'sys_reg' and if non-NULL set
the variable to which it points with 'o'.
(parse_operands): Update; check for write to read-only system
registers or read from write-only ones.
gas/testsuite/
* gas/aarch64/diagnostic.s: Add tests.
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/tracereg-illegal.d: New file.
* gas/aarch64/tracereg-illegal.l: Ditto.
* gas/aarch64/tracereg-illegal.s: Ditto.
* gas/aarch64/tracereg.d: Ditto.
* gas/aarch64/tracereg.s: Ditto.
include/opcode
* aarch64.h (aarch64_sys_reg_readonly_p): New declaration.
(aarch64_sys_reg_writeonly_p): Ditto.
opcodes/
* aarch64-opc.c (CPENT): New define.
(F_READONLY, F_WRITEONLY): Likewise.
(aarch64_sys_regs): Add trace unit registers.
(aarch64_sys_reg_readonly_p): New function.
(aarch64_sys_reg_writeonly_p): Ditto.
* config/tc-aarch64.c (parse_sys_reg): Update to use aarch64_sys_reg;
call aarch64_sys_reg_deprecated_p and warn about the deprecated
system registers.
gas/testsuite/
* gas/aarch64/deprecated.d: New file.
* gas/aarch64/deprecated.l: New file.
* gas/aarch64/deprecated.s: New file.
* gas/aarch64/sysreg-1.s: Add tests.
* gas/aarch64/sysreg-1.d: Add tests.
include/opcode/
* aarch64.h (aarch64_sys_reg): New typedef.
(aarch64_sys_regs): Change to define with the new type.
(aarch64_sys_reg_deprecated_p): Declare.
opcodes/
* aarch64-opc.c (F_DEPRECATED): New macro.
(aarch64_sys_regs): Update; flag "spsr_svc" and "spsr_hyp" with
F_DEPRECATED.
(aarch64_print_operand): Call aarch64_sys_reg_deprecated_p on
AARCH64_OPND_SYSREG.
* mips.h (M_DEXT, M_DINS): Delete.
opcodes/
* micromips-opc.c (micromips_opcodes): Replace "dext" and "dins"
macro entries with "dextm", "dextu", "dinsm" and "dinsu" aliases.
Use +H rather than +C for the real "dext".
* mips-opc.c (mips_builtin_opcodes): Likewise.
gas/
* config/tc-mips.c (report_bad_range, report_bad_field): Delete.
(macro): Remove M_DEXT and M_DINS handling.
gas/testsuite/
* gas/mips/ext-ill.l, gas/mips/mips64r2-ill.l: Expect DEXT and DINS
error messages to have the same form as the EXT and INS ones.
* gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d,
gas/mips/micromips-trap.d, gas/mips/micromips.d,
gas/mips/micromips@mips64r2.d, gas/mips/mips64r2.d: Expect
"dext" and "dins" instead of "dextm", "dextu", "dinsm" and "dinsu".
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips.h: Document new VU0 operand characters.
(OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types.
(OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R)
(OP_REG_R5900_ACC): New mips_reg_operand_types.
(INSN2_VU0_CHANNEL_SUFFIX): New macro.
(mips_vu0_channel_mask): Declare.
opcodes/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(print_vu0_channel): New function.
(print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(print_insn_args): Handle '#'.
(print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX.
* mips-opc.c (mips_vu0_channel_mask): New constant.
(decode_mips_operand): Handle new VU0 operand types.
(VU0, VU0CH): New macros.
(mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E"
for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2.
Use "+6" rather than "G" for QMFC2 and QMTC2.
gas/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (MAX_OPERANDS): Bump to 6.
(RWARN): Bump to 0x8000000.
(RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R)
(RTYPE_R5900_ACC): New register types.
(RTYPE_MASK): Include them.
(R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New
macros.
(reg_names): Include them.
(mips_parse_register_1): New function, split out from...
(mips_parse_register): ...here. Add a channels_ptr parameter.
Look for VU0 channel suffixes when nonnull.
(reg_lookup): Update the call to mips_parse_register.
(mips_parse_vu0_channels): New function.
(OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types.
(mips_operand_token): Add a "channels" field to the union.
Extend the comment above "ch" to OT_DOUBLE_CHAR.
(mips_parse_base_start): Match -- and ++. Handle channel suffixes.
(mips_parse_argument_token): Handle channel suffixes here too.
(validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX.
Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits.
Handle '#' formats.
(md_begin): Register $vfN and $vfI registers.
(operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(match_vu0_suffix_operand): New function.
(match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(macro): Use "+7" rather than "E" for LDQ2 and STQ2.
(mips_lookup_insn): New function.
(mips_ip): Use it. Allow "+K" operands to be elided at the end
of an instruction. Handle '#' sequences.
gas/testsuite/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric
coprocessor registers.
* gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d,
gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests.
* gas/mips/mips.exp: Run them.
* mips.h (mips_pcrel_operand): Inherit from mips_int_operand.
(mips_int_operand_min, mips_int_operand_max): New functions.
(mips_decode_pcrel_operand): Use mips_decode_int_operand.
opcodes/
* mips-formats.h (PCREL): Reorder parameters and update the definition
to match new mips_pcrel_operand layout.
(JUMP, JALX, BRANCH): Update accordingly.
* mips16-opc.c (decode_mips16_operand): Likewise.
gas/
* config/tc-mips.c (match_int_operand): Use mips_int_operand_min
and mips_int_operand_max.
(mips16_immed_operand, mips16_immed_operands, MIPS16_NUM_IMMED):
Delete.
(mips16_immed_operand, mips16_immed_in_range_p): New functions.
(mips16_immed, mips16_extended_frag): Use them. Use mips_int_operand
instead of mips16_immed_operand.
* mips.h (MIPS16_INSN_WRITE_SP, MIPS16_INSN_READ_31)
(MIPS16_INSN_READ_PC, MIPS16_INSN_UNCOND_BRANCH)
(MIPS16_INSN_COND_BRANCH): Delete.
opcodes/
* mips16-opc.c (UBR, CBR, RD_31, RD_PC): Redefine as INSN2_* flags.
(WR_SP): Replace with...
(MOD_SP): ...this.
(mips16_opcodes): Update accordingly.
* mips-dis.c (print_insn_mips16): Likewise.
gas/
* config/tc-mips.c (compact_branch_p, uncond_branch_p): Use the same
flags for MIPS16 and non-MIPS16 instructions.
(gpr_mod_mask): Move the INSN2_MOD_SP case outside the micromips block.
(gpr_read_mask): Use INSN2_READ_GPR_31 for MIPS16 instructions too.
(gpr_write_mask): Remove MIPS16_INSN_WRITE_SP handling.
(can_swap_branch_p, get_append_method): Use the same flags for MIPS16
and non-MIPS16 instructions. Fix formatting.
* mips.h (mips_operand_type, mips_reg_operand_type): New enums.
(mips_operand, mips_int_operand, mips_mapped_int_operand)
(mips_msb_operand, mips_reg_operand, mips_reg_pair_operand)
(mips_pcrel_operand): New structures.
(mips_insert_operand, mips_extract_operand, mips_signed_operand)
(mips_decode_int_operand, mips_decode_pcrel_operand): New functions.
(decode_mips_operand, decode_micromips_operand): Declare.
opcodes/
* mips-formats.h: New file.
* mips-opc.c: Include mips-formats.h.
(reg_0_map): New static array.
(decode_mips_operand): New function.
* micromips-opc.c: Remove <stdio.h> include. Include mips-formats.h.
(reg_0_map, reg_28_map, reg_29_map, reg_31_map, reg_m16_map)
(reg_mn_map, reg_q_map, reg_h_map1, reg_h_map2, int_b_map)
(int_c_map): New static arrays.
(decode_micromips_operand): New function.
* mips-dis.c (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map)
(micromips_to_32_reg_d_map, micromips_to_32_reg_e_map)
(micromips_to_32_reg_f_map, micromips_to_32_reg_g_map)
(micromips_to_32_reg_h_map1, micromips_to_32_reg_h_map2)
(micromips_to_32_reg_l_map, micromips_to_32_reg_m_map)
(micromips_to_32_reg_n_map, micromips_to_32_reg_q_map)
(micromips_imm_b_map, micromips_imm_c_map): Delete.
(print_reg): New function.
(mips_print_arg_state): New structure.
(init_print_arg_state, print_insn_arg): New functions.
(print_insn_args): Change interface and use mips_operand structures.
Delete GET_OP_S. Move GET_OP definition to...
(print_insn_mips): ...here. Update the call to print_insn_args.
(print_insn_micromips): Use print_insn_args.
gas/
* config/tc-mips.c (validate_mips_insn): Move further up file.
Add insn_bits and decode_operand arguments. Use the mips_operand
fields to work out which bits an operand occupies. Detect double
definitions.
(validate_micromips_insn): Move further up file. Call into
validate_mips_insn.
* mips.h (M_ACLR_OB, M_ASET_OB, M_CACHE_OB, M_CACHEE_OB, M_L_DOB)
(M_LB_A, M_LBE_OB, M_LBU_A, M_LBUE_OB, M_LD_A, M_LD_OB, M_LDC2_OB)
(M_LDL_OB, M_LDM_OB, M_LDP_OB, M_LDR_OB, M_LH_A, M_LHE_OB, M_LHU_A)
(M_LHUE_OB, M_LL_OB, M_LLD_OB, M_LLE_OB, M_LS_A, M_LW_A, M_LWE_OB)
(M_LWC0_A, M_LWC1_A, M_LWC2_A, M_LWC2_OB, M_LWC3_A, M_LWL_A, M_LWL_OB)
(M_LWLE_OB, M_LWM_OB, M_LWP_OB, M_LWR_A, M_LWR_OB, M_LWRE_OB, M_LWU_OB)
(M_PREF_OB, M_PREFE_OB, M_S_DOB, M_SAA_OB, M_SAAD_OB, M_SC_OB)
(M_SCD_OB, M_SCE_OB, M_SD_A, M_SD_OB, M_SDC2_OB, M_SDL_OB, M_SDM_OB)
(M_SDP_OB, M_SDR_OB, M_SB_A, M_SBE_OB, M_SH_A, M_SHE_OB, M_SW_A)
(M_SWE_OB, M_SWC0_A, M_SWC1_A, M_SWC2_A, M_SWC2_OB, M_SWC3_A, M_SWL_A)
(M_SWL_OB, M_SWLE_OB, M_SWM_OB, M_SWP_OB, M_SWR_A, M_SWR_OB, M_SWRE_OB)
(M_ULD, M_ULH, M_ULHU, M_ULW, M_USH, M_USW, M_USD): Delete.
(M_ULD_A, M_ULH_A, M_ULHU_A, M_ULW_A, M_USH_A, M_USW_A, M_USD_A):
Rename to...
(M_ULD_AB, M_ULH_AB, M_ULHU_AB, M_ULW_AB, M_USH_AB, M_USW_AB)
(M_USD_AB): ...these.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove o(b) macros. Move LD
and SD A(B) macros up.
* micromips-opc.c (micromips_opcodes): Likewise.
gas/
* config/tc-mips.c (gprel16_reloc_p): New function.
(macro_read_relocs): Assume BFD_RELOC_LO16 if all relocs are
BFD_RELOC_UNUSED.
(offset_high_part, small_offset_p): New functions.
(nacro): Use them. Remove *_OB and *_DOB cases. For single-
register load and store macros, handle the 16-bit offset case first.
If a 16-bit offset is not suitable for the instruction we're
generating, load it into the temporary register using
ADDRESS_ADDI_INSN. Make the M_LI_DD code fall through into the
M_L_DAB code once the address has been constructed. For double load
and store macros, again handle the 16-bit offset case first.
If the second register cannot be accessed from the same high
part as the first, load it into AT using ADDRESS_ADDI_INSN.
Fix the handling of LD in cases where the first register is the
same as the base. Also handle the case where the offset is
not 16 bits and the second register cannot be accessed from the
same high part as the first. For unaligned loads and stores,
fuse the offbits == 12 and old "ab" handling. Apply this handling
whenever the second offset needs a different high part from the first.
Construct the offset using ADDRESS_ADDI_INSN where possible,
for offbits == 16 as well as offbits == 12. Use offset_reloc
when constructing the individual loads and stores.
(mips_ip): Set up imm_expr, imm2_expr, offset_expr, imm_reloc
and offset_reloc before matching against a particular opcode.
Handle elided 'A' constants. Allow 'A' constants to use
relocation operators.
gas/testsuite/
* gas/mips/ldstla-32.d: Avoid "lui at,0x0" sequences for
truncated constants.
* gas/mips/ldstla-32-shared.d: Likewise.
* gas/mips/mcu.d: Use ADDIU in preference to LI+ADDU when adding
16-bit constants to the base.
* gas/mips/micromips@mcu.d: Likewise.
* gas/mips/micromips@cache.d: Likewise.
* gas/mips/micromips@pref.d: Likewise.
* gas/mips/micromips.d, gas/mips/micromips-insn32.d,
gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d: Likewise.
Allow the full 16-bit offset range to be used for SB, LB and LBU in
USH and ULH sequences. Fix the expected output for LD and SD when
the two LW and SW offsets need different high parts.
* gas/mips/eva.s: Test PREFE with relocation operators.
* gas/mips/eva.d: Use ADDIU in preference to LI+ADDU for 16-bit
constants. Update after eva.s change.
* gas/mips/micromips@eva.d: Likewise.
* gas/mips/ld-reloc.s, gas/mips/ld-reloc.d, gas/mips/l_d-reloc.s,
gas/mips/l_d-reloc.d, gas/mips/ulw-reloc.s, gas/mips/ulw-reloc.d,
gas/mips/micromips@ulw-reloc.d, gas/mips/ulh-reloc.s,
gas/mips/ulh-reloc.d: New tests.
* gas/mips/mips.exp: Run them.
* mips.h: Remove documentation of "[" and "]". Update documentation
of "k" and the MDMX formats.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400
MDMX-like instructions.
* mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when
printing "Q" operands for INSN_5400 instructions.
gas/
* config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling.
(mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions.
Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions.
gas/testsuite/
* gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: New test.
* gas/mips/mips.exp: Run it.
* mips.h: Update documentation of "+s" and "+S".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "+s" for "cins32" and
"+S" for "cins".
* mips-dis.c (print_mips_arg): Update "+s" and "+S" comments.
Combine cases.
gas/
* config/tc-mips.c (mips_ip): Preserve the real bit number for "+p".
Require the msb to be <= 31 for "+s". Check that the size is <= 31
for both "+s" and "+S".
* mips.h: Document "+i".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for
"jalx".
* mips16-opc.c (mips16_opcodes): Likewise.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_mips16_insn_arg)
(print_insn_mips16): Handle "+i".
(print_insn_micromips): Likewise. Conditionally preserve the
ISA bit for "a" but not for "+i".
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn):
(mips_ip, mips16_ip): Handle "+i".
* mips.h: Remove documentation of "+D" and "+T".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
and "+T" handling. Check for a "0" suffix when deciding whether to
use coprocessor 0 names. In that case, also check for ",H" selectors.
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
(mips_ip): Remove "+D" and "+T" handling.
gas/testsuite/
* gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names
for LWC0 and SWC0.
* mips.h: Fix comment for "1": it is now STYPE rather than SHAMT.
Use "source" rather than "destination" for microMIPS "G".
gas/
* config/tc-mips.c (validate_mips_insn): Use STYPE rather than SHAMT.
* doc/binutils.texi: Document -Mvirt disassembler option.
gas/ChangeLog:
* config/tc-mips.c (struct mips_set_options): New ase_virt field.
(mips_opts): Update for the new field.
(file_ase_virt): New variable.
(ISA_SUPPORTS_VIRT_ASE): New macro.
(ISA_SUPPORTS_VIRT64_ASE): New macro.
(MIPS_CPU_ASE_VIRT): New define.
(is_opcode_valid): Handle ase_virt.
(macro_build): Handle "+J".
(validate_mips_insn): Likewise.
(mips_ip): Likewise.
(enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
(md_longopts): Add mvirt and mnovirt
(md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
(mips_after_parse_args): Handle ase_virt field.
(s_mipsset): Handle "virt" and "novirt".
(mips_elf_final_processing): Add a comment about virt ASE might need a new flag.
(md_show_usage): Print out the usage of -mvirt and mno-virt options.
* doc/c-mips.texi: Document -mvirt and -mno-virt.
Document ".set virt" and ".set novirt".
gas/testsuite/ChangeLog:
* gas/mips/mips.exp: Run virt and virt64 testcases.
* gas/mips/virt.d: New file.
* gas/mips/virt.s: New file.
* gas/mips/virt64.d: New file.
* gas/mips/virt64.s: New file.
include/opcode/ChangeLog:
* mips.h (OP_MASK_CODE10): Correct definition.
(OP_SH_CODE10): Likewise.
Add a comment that "+J" is used now for OP_*CODE10.
(INSN_ASE_MASK): Update.
(INSN_VIRT): New macro.
(INSN_VIRT64): New macro
opcodes/ChangeLog:
* mips-dis.c (mips_arch_choices): Add INSN_VIRT to mips32r2 .
Add INSN_VIRT and INSN_VIRT64 to mips64r2.
(parse_mips_dis_option): Handle the virt option.
(print_insn_args): Handle "+J".
(print_mips_disassembler_options): Print out message about virt64.
* mips-opc.c (IVIRT): New define.
(IVIRT64): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp VIRT instructions.
Move rfe to the bottom as it conflicts with tlbgp.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
Make current with UA2011 specification.
Add an F_PREFERRED opcode flag that indicates a preferred alias
when multiple aliases for the same opcode exists.
For 'lzd':
Add 'lzcnt' as primary instruction, and make 'lzd' an alias.
Add 'ldtw', 'ldtwa', 'sttw', 'sttwa':
The modern opcode for for 'ldd', 'ldda', 'std', and 'stda' on
integer registers. Mark the latter now as aliases.
For 'flush':
Support "[address]" syntax as well as plain "address".
Rework 'mov' aliases for 'wr':
Eliminate bogus three operand moves, and encode the
instructions properly for the "mov REG, %ASR" cases,
specifically we should encode the register in rs2 not rs1 as
per The SPARC V8 Architecture Manual.
Add missing cbcond aliases:
c{w,x}bz, c{w,x}blu, c{w,x}bnz, c{w,x}bgeu
Add 'd' suffix VIS logical ops:
The primary opcode for 'fzero' is now 'fzerod' (compare with
'fzeros'), for example. And thus 'fzero' is now an alias.
Add modern opcodes for condition code setting edge instructions:
They are now edgeN{,l}cc instead of plain edgeN{,l}.
Add modern opcodes for VIS comparisons:
All VIS comparisons now start with prefix "fp", retain the
older variants as aliases.
The signed variants for equal and not-equal have "u" aliases
to show that these comparisons are equally suited for unsigned
compares.
Update existing test cases as needed, and add several new ones.
include/opcode/
* sparc.h (F_PREFERRED): Define.
(F_PREF_ALIAS): Define.
opcodes/
* sparc-dis.c (compare_opcodes): When encountering multiple aliases
of an opcode, prefer the one with F_PREFERRED set.
* sparc-opc.c (sparc_opcodes): Add ldtw, ldtwa, sttw, sttwa,
lzcnt, flush with '[address]' syntax, and missing cbcond pseudo
ops. Make 64-bit VIS logical ops have "d" suffix in their names,
mark existing mnenomics as aliases. Add "cc" suffix to edge
instructions generating condition codes, mark existing mnenomics
as aliases. Add "fp" prefix to VIS compare instructions, mark
existing mnenomics as aliases.
gas/testsuite/
* gas/sparc/cbcond.s: Add tests for new opcode aliases.
* gas/sparc/cbcond.d: Updated.
* gas/sparc/hpcvis3.s: Add tests for new opcode aliases.
* gas/sparc/hpcvis3.d: Updated.
* gas/sparc/v8-movwr-imm.d: Fix expected disassembly.
* gas/sparc/edge.s: New test.
* gas/sparc/edge.d: Expected disassembly.
* gas/sparc/flush.s: New test.
* gas/sparc/flush.d: Expected disassembly.
* gas/sparc/ldd_std.s: New test.
* gas/sparc/ldd_std.d: Expected disassembly.
* gas/sparc/ldtw_sttw.s: New test.
* gas/sparc/ldtw_sttw.d: Expected disassembly.
* gas/sparc/sparc.exp: Run new tests.
(bfd_elf32_bfd_is_target_special_symbol): Define.
* v850.h (V850_INVERSE_PCREL): Define.
* v850-dis.c (print_value): With V850_INVERSE_PCREL compute the
destination address by subtracting the operand from the current
address.
* v850-opc.c (insert_u16_loop): Disallow negative offsets. Store
a positive value in the insn.
(extract_u16_loop): Do not negate the returned value.
(D16_LOOP): Add V850_INVERSE_PCREL flag.
(ceilf.sw): Remove duplicate entry.
(cvtf.hs): New entry.
(cvtf.sh): Likewise.
(fmaf.s): Likewise.
(fmsf.s): Likewise.
(fnmaf.s): Likewise.
(fnmsf.s): Likewise.
(maddf.s): Restrict to E3V5 architectures.
(msubf.s): Likewise.
(nmaddf.s): Likewise.
(nmsubf.s): Likewise.
* tic6x-opcode-table.h: Fix patterns for add, ldnw and xor.
* gas/tic6x/insns16-lsd-unit.s: Correct bit patterns for mvk, add
and xor.
* gas/tic6x/insns16-lsd-unit.d: Update expected output.
* tic6x-opcode-table.h: Rename mpydp's specific operand type macro
from ORREGD1324 to ORXREGD1324 and make it cross-path-able through
tic6x_operand_xregpair operand coding type.
Make mpydp instruction cross-path-able, ie: remove the FIXed 'x'
opcode field, usu ORXREGD1324 for the src2 operand and remove the
TIC6X_FLAG_NO_CROSS.
* gas/tic6x/insns-bad-1.s: Remove test-case for mpydp with
cross-path.
* gas/tic6x/insns-bad-1.l: Update expected output.
* gas/tic6x/insns-c674x.s: Add a test-case for mpydp with
cross-path.
* gas/tic6x/insns-c674x.d: Update expected output.
order to encode separately the msb and lsb of a register pair ; this will be
needed to encode the opcodes the same
way as Ti assembler does.
* gas/config/tc-tic6x.c: handle tic6x_coding_dreg_(msb|lsb) field coding types
and use it to encode register pair numbers when required.
* opcodes/tic6x-dis.c: decodes opcodes that have individual msb and lsb halves
in src1 & src2 fields ; discard the src1 (lsb) value and only use src2 (msb),
discarding bit 0, to follow what Ti SDK does in that case as any value in the
src1 field yields the same output with SDK disassembler.
* include/opcode/tic6x-opcode-table.h: modify absdp, dpint, dpsp, dptrunc,
rcpdp and rsqrdp opcodes to use the new field coding types.
* gas/testsuite/gas/tic6x/insns-c674x.d, gas/testsuite/gas/tic6x/insns-c674x.s
: add test case for the newly generated opcode but keep the old ones as they
seem legit as per Ti disassembler output.
* tic6x-opcode-table.h: Fix encoding of BNOP instruction.
* gas/tic6x/insns-c674x-pcrel.s: Add test of BNOP instruction
within header based fetch packet.
* gas/tic6x/insns-c674x-pcrel.d: Update expected disassembly.
Alan Modra