* ld-mips-elf/rel32-n32.d: Bump addresses by 0x30 to account for
the fact that .reginfo is now placed before .text. Change the
section number of .text accordingly.
* ld-mips-elf/elf-rel-got-n32.d: Adjust page gap from 0x100000
to 0x10000. Move .reginfo before .text and bump .text addresses
by 0x10 to make room. Move data segment down by 0x10 bytes to
account for new size of text segment.
* ld-mips-elf/elf-rel-xgot-n32.d: Likewise.
* ld-mips-elf/elf-rel-got-n64-linux.d: Adjust page gap from
0x100000 to 0x10000.
* ld-mips-elf/elf-rel-xgot-n64-linux.d: Likewise.
* Makefile.am (eelf64bmip.c): Depend on emulparams/elf64bmip-defs.sh.
(eelf64btsmip.c, eelf64ltsmip.c): Likewise.
* Makefile.in: Regenerate.
* emulparams/elf32bmipn32-defs.sh (INITIAL_READONLY_SECTIONS): Include
.reginfo rather than .MIPS.options.
* emulparams/elf64bmip-defs.sh: New file.
* emulparams/elf64bmip.sh: Include it.
(COMMONPAGESIZE): Delete.
* emulparams/elf64btsmip.sh: As for elf64bmip.sh.
ld/testsuite/
* ld-mips-elf/branch-misc-1.d: Set the start address to 0x20000000.
* ld-mips-elf/jalbal.d: Likewise 0x200000a0.
* ld-mips-elf/jaloverflow-2.d: Likewise 0x20000000.
* ld-mips-elf/reloc-3-n32.d: Likewise.
* ld-mips-elf/reloc-3.d: Likewise.
* ld-mips-elf/textrel-1.d: Don't require a specific file offset for
.dynamic.
* emulparams/elf32xtensa.sh: Set MAXPAGESIZE here instead of including
xtensa-config.sh.
* Makefile.am (eelf32xtensa.c): Remove dependency on xtensa-config.sh.
* Makefile.in: Regenerate.
* elf-eh-frame.c (skip_cfa_op): Fix handling of DW_CFA_advance_loc.
Handle DW_CFA_{remember,restore}_state, DW_CFA_GNU_window_save,
DW_CFA_val_{offset{,_sf},expression}.
(skip_non_nops): Record number of DW_CFA_set_loc ops.
(_bfd_elf_discard_section_eh_frame): Require skip_non_nops recognizes
all ops. If there are any DW_CFA_set_loc ops and they are pcrel
or going to be pcrel, compute set_loc array.
(_bfd_elf_eh_frame_section_offset): If make_relative, kill relocations
against DW_CFA_set_loc operands.
(_bfd_elf_write_section_eh_frame): Handle DW_CFA_set_loc adjusting.
* ld-elf/eh4.d: New test.
* ld-elf/eh4.s: New file.
* ld-elf/eh4a.s: New file.
(autofilter_symbolprefixlist) : Remove __imp_.
(is_import) : New.
(auto-export) : Remove re-import check. Moved to callers.
(process_def_file) : Check is symbol is an import. Always underscore __imp_.
Only skip underscore on underscored targets.
(make_one) : Always underscore __imp_.
(pe_create_runtime_relocator_reference) : Only underscore _pei386_runtime_relocator on underscored targets.
(pe_process_import_defs) : Always underscore __imp_.
* pe.em (U) : New macro.
(set_pe_subsystem) : Remove underscore from _WinMainCRTStartup on wince subsystem case.
(pe_find_data_imports) : Use U on "_head_".
(gld_${EMULATION_NAME}_unrecognized_file) : Use U.
PR ld/3249
* scripttempl/elf.sc: Don't combine .gnu.linkonce.d.*personality*
and .gnu.linkonce.wi.* sections with .data and .debug_info for
relocatable link.
argument and emits the string followed by a comma and then the length of
the string.
(CONST_STRNEQ): New macro. Checks to see if a variable string has a constant
string as its initial characters.
(CONST_STRNCPY): New macro. Copies a constant string to the start of a
variable string.
* bfd-in2.h: Regenerate.
* <remainign files>: Make use of the new macros.
2006-09-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3197
* elflink.c (elf_link_output_extsym): Compute bucket only if
needed.
ld/testsuite/
2006-09-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3197
* ld-elf/hash.d: New test.
* elf32-xtensa.c (xtensa_get_property_section_name): Delete.
(xtensa_get_property_section): New.
(xtensa_read_table_entries): Use xtensa_get_property_section.
(relax_property_section, xtensa_get_property_predef_flags): Handle
group name suffixes in property section names.
(match_section_group): New.
gas/
* config/tc-xtensa.c (FINI_LITERAL_SECTION_NAME): Delete.
(INIT_LITERAL_SECTION_NAME): Delete.
(lit_state struct): Remove segment names, init_lit_seg, and
fini_lit_seg. Add lit_prefix and current_text_seg.
(init_literal_head_h, init_literal_head): Delete.
(fini_literal_head_h, fini_literal_head): Delete.
(xtensa_begin_directive): Move argument parsing to
xtensa_literal_prefix function.
(xtensa_end_directive): Deallocate lit_prefix field of lit_state.
(xtensa_literal_prefix): Parse the directive argument here and
record it in the lit_prefix field. Remove code to derive literal
section names.
(linkonce_len): New.
(get_is_linkonce_section): Use linkonce_len. Check for any
".gnu.linkonce.*" section, not just text sections.
(md_begin): Remove initialization of deleted lit_state fields.
(xtensa_reorder_segments, xtensa_post_relax_hook): Remove references
to init_literal_head and fini_literal_head.
(xtensa_move_literals): Likewise. Skip literals for .init and .fini
when traversing literal_head list.
(match_section_group): New.
(cache_literal_section): Rewrite to determine the literal section
name on the fly, create the section and return it.
(xtensa_switch_to_literal_fragment): Adjust for cache_literal_section.
(xtensa_switch_to_non_abs_literal_fragment): Likewise.
(xtensa_create_property_segments, xtensa_create_xproperty_segments):
Use xtensa_get_property_section from bfd.
(retrieve_xtensa_section): Delete.
* doc/c-xtensa.texi (Xtensa Options): Fix --text-section-literals
description to refer to plural literal sections and add xref to
the Literal Directive section.
(Literal Directive): Describe new rules for deriving literal section
names. Add footnote for special case of .init/.fini with
--text-section-literals.
(Literal Prefix Directive): Replace old naming rules with xref to the
Literal Directive section.
ld/
* emulparams/elf32xtensa.sh (.xt.prop): Add .xt.prop.*.
* scripttempl/elfxtensa.sc (.text): Add .literal.*.
* Makefile.am: Add rules to build pe-arm-wince.lo and pei-arm-wince.lo objects.
* Makefile.in: Regenerate.
* pe-arm-wince.c: New file.
* pei-arm-wince.c: New file.
* pei-arm.c: Remove ARM_WINCE block.
* pe-arm.c: Remove ARM_WINCE block. Rename
bfd_arm_pe_allocate_interworking_sections,
bfd_arm_pe_get_bfd_for_interworking, and
bfd_arm_pe_process_before_allocation to
bfd_armpe_allocate_interworking_sections,
bfd_armpe_get_bfd_for_interworking, and
bfd_armpe_process_before_allocation. Move them before including bfd.h.
* bfd.c: ARM wince bfd format names were renamed. Adjust.
* coff-arm.c [ARM_WINCE]: Adjust so Windows CE doesn't end up with unexpected/conflicting relocs.
* targets.c: The arm-wince-pe target got its own new vector. Adjust.
* config.bfd: Likewise.
* configure.in: Likewise.
* configure: Regenerate.
binutils
* configure.in: Split arm-pe and arm-wince-pe. Build dlltool with -DDLLTOOL_ARM_WINCE for Windows CE case.
* configure: Regenerate.
* dlltool.c: Add support for arm-wince.
gas
* Makefile.am (TARG_ENV_HFILES): Add te-wince-pe.h.
* Makefile.in: Regenerate.
* config/tc-arm.h [TARGET_FORMAT]: ARM wince bfd names were renamed. Adjust.
ld
* Makefile.am: Split arm-wince into its own emulation.
* Makefile.in: Regenerate.
* configure.tgt: Set targ_emul to arm_wince_pe for ARM Windows CE targets.
* pe-dll.c : Define PE_ARCH_arm_wince.
(pe_detail_list): Add PE_ARCH_arm_wince case.
(make_one): Handle PE_ARCH_arm_epoc and PE_ARCH_arm_wince cases.
* emulparams/arm_wince_pe.sh: New file.
* emultempl/pe.em: Handle new TARGET_IS_arm_wince_pe define.
Remap bfd_arm_allocate_interworking_sections, bfd_arm_get_bfd_for_interworking and
bfd_arm_process_before_allocation for arm-pe and arm-wince-pe targets too.
(gld_${EMULATION_NAME}_recognized_file): Handle arm-wince and arm-epoc bfd format names.
2006-08-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3015
* elf.c (get_program_header_size): Add a PT_GNU_RELRO segment
only if there is a PT_DYNAMIC segment.
(_bfd_elf_map_sections_to_segments): Likewise.
(assign_file_positions_for_load_sections): Set PT_GNU_RELRO
segment alignment to 1.
ld/testsuite/
2006-08-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3015
* ld-elf/binutils.exp: Add tests for "-z relro".
PR 3052
* ldlang.h (lang_output_section_statement_type): Replace
"processed" field with "processed_vma" and "processed_lma".
* ldlang.c (lang_do_assignments_1): Move lma setting code..
(lang_size_sections_1): ..to here.
(lang_reset_memory_regions): Adjust for
lang_output_section_statement_type change.
* ldexp.c (fold_name): Likewise.
And this is something I forgot the check in from the previous patch.
ld/testsuite/
* ld-scripts/overlay-size-map.d: Adjust.
PR ld/3006
* ldlang.c (lang_section_bst_type): Moved to ...
* ldlang.h: Here.
* ldlang.h (lang_wild_statement_struct): Add a tree field.
* ldlang.c (wild_sort_fast): Use the tree field for BST.
(wild): Likeise.
(analyze_walk_wild_section_handler): Initialize the tree field.
* coff-arm.c (coff_arm_rtype_to_howto) [COFF_WITH_PE]: Handle ARM_SECREL.
(coff_arm_reloc_type_lookup): Map BFD_RELOC_32_SECREL to ARM_SECREL.
* pe-arm.c [COFF_SECTION_ALIGNMENT_ENTRIES]: Define.
* pei-arm.c [TARGET_UNDERSCORE]: Define for ARM_WINCE like in pe-arm.c.
[COFF_SECTION_ALIGNMENT_ENTRIES]: Define.
* config/tc-arm.c: Move "dwarf2dbg.h" inclusion out of OBJ_ELF only block.
(pe_directive_secrel) [TE_PE]: New function.
(md_pseudo_table) [!OBJ_ELF]: Handle 2byte, 4byte, 8byte, file, loc, loc_mark_labels.
[TE_PE]: Handle secrel32.
(output_relax_insn): Remove OBJ_ELF around dwarf2_emit_insn call.
(output_inst): Remove OBJ_ELF around dwarf2_emit_insn call.
(arm_frob_label): Remove OBJ_ELF around dwarf2_emit_label call.
(md_section_align): Only round section sizes here for AOUT targets.
(tc_arm_regname_to_dw2regnum): Move out for OBJ_ELF only block.
(tc_pe_dwarf2_emit_offset): New function.
(md_apply_fix) [TE_PE]: Handle BFD_RELOC_32_SECREL.
(cons_fix_new_arm): Handle O_secrel.
* config/tc-arm.h : Move DWARF2_LINE_MIN_INSN_LENGTH, DWARF2_DEFAULT_RETURN_COLUMN and DWARF2_CIE_DATA_ALIGNMENT out of OBJ_ELF only block.
[TE_PE]: Define O_secrel, TC_DWARF2_EMIT_OFFSET, and declare tc_pe_dwarf2_emit_offset.
* ld-pe/pe.exp: Enable tests on arm-wince-pe.
* ld-pe/secrel.d: Adjust test to work on arm-wince-pe too.
* lexsup.c: Add --print-gc-sections and --no-print-gc-sections switches.
* ld.texinfo: Document new switches.
* NEWS: Mention new switches.
* bfdlink.h (struct bfd_link_info): New field: print_gc_sections.
* elflink.c (elf_gc_sweep): If info.print_gc_sections is true, list removed sections to stderr.
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* config.bfd (sh-*-vxworks): Use bfd_elf32_shvxworks_vec and
bfd_elf32_shlvxworks_vec.
* configure.in (bfd_elf32_sh64_vec): Add elf-vxworks.lo.
(bfd_elf32_sh64l_vec, bfd_elf32_sh64lin_vec): Likewise.
(bfd_elf32_sh64blin_vec, bfd_elf32_sh64lnbsd_vec): Likewise.
(bfd_elf32_sh64nbsd_vec, bfd_elf32_sh_vec): Likewise.
(bfd_elf32_shblin_vec, bfd_elf32_shl_vec): Likewise.
(bfd_elf32_shl_symbian_vec, bfd_elf32_shlin_vec): Likewise.
(bfd_elf32_shlnbsd_vec, bfd_elf32_shnbsd_vec): Likewise.
(bfd_elf32_shlvxworks_vec, bfd_elf32_shvxworks_vec): New stanzas.
* configure: Regenerate.
* Makefile.am: Regenerate dependencies.
* Makefile.in: Regenerate.
* elf-vxworks.c (elf_vxworks_gott_symbol_p): New function.
(elf_vxworks_add_symbol_hook): Use it.
(elf_vxworks_link_output_symbol_hook): Likewise. Use the hash
table entry to check for weak undefined symbols and to obtain
the original bfd.
(elf_vxworks_emit_relocs): Use target_index instead of this_idx.
* elf32-sh-relocs.h: New file, split from elf32-sh.c.
(R_SH_DIR32): Use SH_PARTIAL32 for the partial_inplace field,
SH_SRC_MASK32 for the src_mask field, and SH_ELF_RELOC for the
special_function field.
(R_SH_REL32): Use SH_PARTIAL32 and SH_SRC_MASK32 here too.
(R_SH_REL32, R_SH_TLS_GD_32, R_SH_TLS_LD_32): Likewise.
(R_SH_TLS_LDO_32, R_SH_TLS_IE_32, R_SH_TLS_LE_32): Likewise.
(R_SH_TLS_DTPMOD32, R_SH_TLS_DTPOFF32, R_SH_TLS_TPOFF32): Likewise.
(R_SH_GOT32, R_SH_PLT32, R_SH_COPY, R_SH_GLOB_DAT): Likewise.
(R_SH_JMP_SLOT, R_SH_RELATIVE, R_SH_GOTOFF, R_SH_GOTPC): Likewise.
(SH_PARTIAL32, SH_SRC_MASK32, SH_ELF_RELOC): Undefine at end of file.
* elf32-sh.c: Include elf32-vxworks.h.
(MINUS_ONE): Define.
(sh_elf_howto_table): Include elf32-sh-relocs.h with SH_PARTIAL32
set to TRUE, SH_SRC_MASK32 set to 0xffffffff, and SH_ELF_RELOC set
to sh_elf_reloc.
(sh_vxworks_howto_table): New variable. Include elf32-sh-relocs.h
with SH_PARTIAL32 set to FALSE, SH_SRC_MASK32 set to 0, and
SH_ELF_RELOC set to bfd_elf_generic_reloc.
(vxworks_object_p, get_howto_table): New functions.
(sh_elf_reloc_type_lookup): Fix typo. Use get_howto_table.
(sh_elf_info_to_howto): Use get_howto_table.
(sh_elf_relax_section): Honor the partial_inplace field of the
R_SH_DIR32 howto.
(sh_elf_relax_delete_bytes): Likewise.
(elf_sh_plt_info): New structure.
(PLT_ENTRY_SIZE): Replace both definitions with...
(ELF_PLT_ENTRY_SIZE): ...this new macro, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry_be): Update sizes of both definitions accordingly.
(elf_sh_plt0_entry_le): Likewise.
(elf_sh_plt_entry_be, elf_sh_plt_entry_le): Likewise.
(elf_sh_pic_plt_entry_be, elf_sh_pic_plt_entry_le): Likewise.
(elf_sh_plts): New structure, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry): Delete both definitions.
(elf_sh_plt_entry, elf_sh_pic_plt_entry): Likewise.
(elf_sh_sizeof_plt, elf_sh_plt_plt0_offset): Likewise.
(elf_sh_plt_temp_offset, elf_sh_plt_symbol_offset): Likewise.
(elf_sh_plt_reloc_offset): Likewise.
(movi_shori_putval): Delete in favor of...
(install_plt_field): ...this new function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(get_plt_info): New function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_linker_offset, elf_sh_plt0_gotid_offset): Delete.
(VXWORKS_PLT_HEADER_SIZE, VXWORKS_PLT_ENTRY_SIZE): New macros.
(vxworks_sh_plt0_entry_be, vxworks_sh_plt0_entry_le): New constants.
(vxworks_sh_plt_entry_be, vxworks_sh_plt_entry_le): Likewise.
(vxworks_sh_pic_plt_entry_be, vxworks_sh_pic_plt_entry_le): Likewise.
(get_plt_index, get_plt_offset): New functions.
(elf_sh_link_hash_table): Add srelplt2, plt_info and vxworks_p fields.
(sh_elf_link_hash_table_create): Initialize them.
(sh_elf_create_dynamic_sections): Call
elf_vxworks_create_dynamic_sections for VxWorks.
(allocate_dynrelocs): Use htab->plt_info to get the size of PLT
entries. Allocate relocation entries in .rela.plt.unloaded if
generating a VxWorks executable.
(sh_elf_always_size_sections): New function.
(sh_elf_size_dynamic_sections): Extend .rela.plt handling to
.rela.plt.unloaded.
(sh_elf_relocate_section): Use get_howto_table. Honor
partial_inplace when calculating the addend for dynamic
relocations. Use get_plt_index.
(sh_elf_finish_dynamic_symbol): Use get_plt_index, install_plt_field
and htab->plt_info. Fill in the bra .plt offset for VxWorks
executables. Populate .rela.plt.unloaded. Do not make
_GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(sh_elf_finish_dynamic_sections): Use install_plt_field and
htab->plt_info. Handle cases where there is no special PLT header.
Populate the first relocation in .rela.plt.unloaded and fix up
the remaining entries.
(sh_elf_plt_sym_val): Use get_plt_info.
(elf_backend_always_size_sections): Define.
(TARGET_BIG_SYM, TARGET_BIG_NAME): Override for VxWorks.
(TARGET_LITTLE_SYM, TARGET_BIG_SYM): Likewise.
(elf32_bed, elf_backend_want_plt_sym): Likewise.
(elf_symbol_leading_char, elf_backend_want_got_underscore): Likewise.
(elf_backend_grok_prstatus, elf_backend_grok_psinfo): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing): Likewise.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Likewise.
* targets.c (bfd_elf32_shlvxworks_vec): Declare.
(bfd_elf32_shvxworks_vec): Likewise.
(_bfd_target_vector): Include bfd_elf32_shlvxworks_vec and
bfd_elf32_shvxworks_vec.
gas/
* config/tc-sh.c (apply_full_field_fix): New function.
(md_apply_fix): Use it instead of md_number_to_chars. Do not fill
in fx_addnumber for BFD_RELOC_32_PLT_PCREL.
(tc_gen_reloc): Use fx_addnumber rather than 0 as the default case.
* config/tc-sh.h (TARGET_FORMAT): Override for TE_VXWORKS.
ld/
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* Makefile.am (ALL_EMULATIONS): Add eshelf_vxworks.o and
eshlelf_vxworks.o.
(eshelf_vxworks.c, eshlelf_vxworks.c): New rules.
* Makefile.in: Regenerate.
* configure.tgt (sh-*-vxworks): Use shelf_vxworks and
shlelf_vxworks.
* emulparams/shelf_vxworks.sh: New file.
* emulparams/shlelf_vxworks.sh: Likewise.
* emulparams/vxworks.sh (FINI): Prefix _etext with ${SYMPREFIX}.
(OTHER_END_SYMBOLS): Likewise _ehdr.
(DATA_END_SYMBOLS): Likewise _edata.
* emultempl/vxworks.em (vxworks_after_open): Check whether output_bfd
is indeed an ELF file before dealing with --force-dynamic.
ld/testsuite/
* ld-sh/rd-sh.exp: Treat vxworks1-static.d specially.
* ld-sh/sh-vxworks.exp: New file.
* ld-sh/sh.exp: Extend sh-linux SIZEOF_HEADERS handling to
sh-*-vxworks.
* ld-sh/vxworks1-le.dd, ld-sh/vxworks1-lib-le.dd,
* ld-sh/vxworks1-lib.dd, ld-sh/vxworks1-lib.nd,
* ld-sh/vxworks1-lib.rd, ld-sh/vxworks1-lib.s,
* ld-sh/vxworks1-static.d, ld-sh/vxworks1.dd,
* ld-sh/vxworks1.ld, ld-sh/vxworks1.rd, ld-sh/vxworks1.s,
* ld-sh/vxworks2-static.sd, ld-sh/vxworks2.s,
* ld-sh/vxworks2.sd, ld-sh/vxworks3-le.dd,
* ld-sh/vxworks3-lib-le.dd, ld-sh/vxworks3-lib.dd,
* ld-sh/vxworks3-lib.s, ld-sh/vxworks3.dd, ld-sh/vxworks3.s,
* ld-sh/vxworks4.d, ld-sh/vxworks4a.s, ld-sh/vxworks4b.s,
* ld-sh/reloc1.s, ld-sh/reloc1.d: New tests.
* bfd/elf64-x86-64.c: Add FreeBSD support.
(elf64_x86_64_fbsd_post_process_headers): New function.
* bfd/targets.c (_bfd_target_vector): Add bfd_elf64_x86_64_freebsd_vec.
* bfd/config.bfd (x64_64-*-freebsd*): Add bfd_elf64_x86_64_freebsd_vec to the targ_selvecs.
* bfd/configure.in: Add entry for bfd_elf64_x86_64_freebsd_vec.
* bfd/configure: Regenerate.
* gas/config/tc-i386.c (md_parse_option): Treat any target starting with elf64_x86_64 as a viable target for the -64 switch.
(i386_target_format): For 64-bit ELF flavoured output use ELF_TARGET_FORMAT64.
* gas/config/tc-i386.h (ELF_TARGET_FORMAT64): Define.
* ld/emulparams/elf_x86_64_fbsd.sh (OUTPUT_FORMAT): Define as elf64-x86-64-freebsd.
(wild_sort_fast): New function: Insert a section into a binary search tree.
(output_section_callback_fast): New function: Store a section in BST.
(output_section_callback_tree_to_list): New function: Convert a BST into a list.
(analyze_walk_wild_section_handler): Initialize handler_data elements.
(wild): If the data is sorted by name use the BST method to sort the names.
2006-07-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/2884
* elflink.c (_bfd_elf_merge_symbol): Copy the symbol info from
the old versioned dynamic definition to the new one with
non-default visibility. Hide the symbol if it is hidden or
internal.
ld/testsuite/
2006-07-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/2884
* ld-elf/begin.c: New file.
* ld-elf/end.c: Likewise.
* ld-elf/endhidden.c: Likewise.
* ld-elf/endprotected.c: Likewise.
* ld-elf/foo.c: Likewise.
* ld-elf/foo.map: Likewise.
* ld-elf/hidden.out: Likewise.
* ld-elf/main.c: Likewise.
* ld-elf/normal.out: Likewise.
* ld-elf/shared.exp: Likewise.
* lib/ld-lib.exp (run_cc_link_tests): New.
2006-07-12 Matthew R. Dempsky <mrd@alkemio.org>
* cpu-m68k.c (bfd_m68k_compatible): Handle CPU32.
ld/testsuite/
2006-07-12 Richard Sandiford <richard@codesourcery.com>
* ld-m68k/merge-ok-1c.d: New test.
* ld-m68k/m68k.exp: Run it.
(autofilter_symbollist): Split into autofilter_symbollist_generic and
autofilter_symbollist_i386.
(pe_detail_list): Add autofilter_symbollist_i386 to i386 case and
autofilter_symbollist_generic for all the others.
(autofilter_symbolprefixlist): Moved _fmode, _impure_ptr, cygwin_attach_dll,
cygwin_premain0, cygwin_premain1, cygwin_premain2, cygwin_premain3,
environ, into autofilter_symbollist_i386.
(auto_export): Get autofilter_symbollist from pe_details.
Add native "%s.lib" format to search list
* ld.texinfo (node WIN32): Update documentation on dynamic lib search order.
Add another reason for using import libs.
* ldlang.c (lang_insert_orphan): Correctly handle the case where
the section is to end up after the section currently at the end
of the list in output_bfd.
bfd/
* elf32-arm.c (elf32_arm_swap_symbol_out): Don't set low
bit for undefined symbols.
ld/testsuite
* ld-arm/arm-elf.exp: New test.
* ld-arm/use-thumb-lib.s: New file.
* ld-arm/use-thumb-lib.sym: New file.
bfd/
* elf32-arm.c (elf32_arm_swap_symbol_out): Don't set low
bit for undefined symbols.
ld/testsuite
* ld-arm/arm-elf.exp: New test.
* ld-arm/use-thumb-lib.s: New file.
* ld-arm/use-thumb-lib.sym: New file.
to R_ARM_LDC_SB_G{0,1,2} respectively.
bfd/
* bfd-in2.h: Regenerate.
* elf32-arm.c (R_ARM_ALU_PC_G0_NC, R_ARM_ALU_PC_G0,
R_ARM_ALU_PC_G1_NC, R_ARM_ALU_PC_G1, R_ARM_ALU_PC_G2,
R_ARM_LDR_PC_G1, R_ARM_LDR_PC_G2, R_ARM_LDRS_PC_G0,
R_ARM_LDRS_PC_G1, R_ARM_LDRS_PC_G2, R_ARM_LDC_PC_G0,
R_ARM_LDC_PC_G1, R_ARM_LDC_PC_G2, R_ARM_ALU_SB_G0_NC,
R_ARM_ALU_SB_G0, R_ARM_ALU_SB_G1_NC, R_ARM_ALU_SB_G1,
R_ARM_ALU_SB_G2, R_ARM_LDR_SB_G0, R_ARM_LDR_SB_G1,
R_ARM_LDR_SB_G2, R_ARM_LDRS_SB_G0, R_ARM_LDRS_SB_G1,
R_ARM_LDRS_SB_G2, R_ARM_LDC_SB_G0, R_ARM_LDC_SB_G1,
R_ARM_LDC_SB_G2): New relocation types.
(R_ARM_PC13): Rename to AAELF name R_ARM_LDR_PC_G0 and
adjust HOWTO entry to be consistent with R_ARM_LDR_PC_G1
and friends.
(elf32_arm_howto_table_3): Delete; contents merged into
elf32_arm_howto_table_2.
(elf32_arm_howto_from_type): Adjust correspondingly.
(elf32_arm_reloc_map): Extend with the above relocations.
(calculate_group_reloc_mask): New function.
(identify_add_or_sub): New function.
(elf32_arm_final_link_relocate): Support for the above
relocations.
* reloc.c: Add enumeration entries for BFD_RELOC_ARM_...
codes to correspond to the above relocations.
gas/
* config/tc-arm.c (enum parse_operand_result): New.
(struct group_reloc_table_entry): New.
(enum group_reloc_type): New.
(group_reloc_table): New array.
(find_group_reloc_table_entry): New function.
(parse_shifter_operand_group_reloc): New function.
(parse_address_main): New function, incorporating code
from the old parse_address function. To be used via...
(parse_address): wrapper for parse_address_main; and
(parse_address_group_reloc): new function, likewise.
(enum operand_parse_code): New codes OP_SHG, OP_ADDRGLDR,
OP_ADDRGLDRS, OP_ADDRGLDC.
(parse_operands): Support for these new operand codes.
New macro po_misc_or_fail_no_backtrack.
(encode_arm_cp_address): Preserve group relocations.
(insns): Modify to use the above operand codes where group
relocations are permitted.
(md_apply_fix): Handle the group relocations
ALU_PC_G0_NC through LDC_SB_G2.
(tc_gen_reloc): Likewise.
(arm_force_relocation): Leave group relocations for the linker.
(arm_fix_adjustable): Likewise.
gas/testsuite/
* gas/arm/group-reloc-alu.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.l: New test.
* gas/arm/group-reloc-alu-encoding-bad.s: New test.
* gas/arm/group-reloc-alu-parsing-bad.d: New test.
* gas/arm/group-reloc-alu-parsing-bad.l: New test.
* gas/arm/group-reloc-alu-parsing-bad.s: New test.
* gas/arm/group-reloc-alu.s: New test.
* gas/arm/group-reloc-ldc.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.l: New test.
* gas/arm/group-reloc-ldc-encoding-bad.s: New test.
* gas/arm/group-reloc-ldc-parsing-bad.d: New test.
* gas/arm/group-reloc-ldc-parsing-bad.l: New test.
* gas/arm/group-reloc-ldc-parsing-bad.s: New test.
* gas/arm/group-reloc-ldc.s: New test.
* gas/arm/group-reloc-ldr.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.l: New test.
* gas/arm/group-reloc-ldr-encoding-bad.s: New test.
* gas/arm/group-reloc-ldr-parsing-bad.d: New test.
* gas/arm/group-reloc-ldr-parsing-bad.l: New test.
* gas/arm/group-reloc-ldr-parsing-bad.s: New test.
* gas/arm/group-reloc-ldr.s: New test.
* gas/arm/group-reloc-ldrs.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.l: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.s: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.d: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.l: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.s: New test.
* gas/arm/group-reloc-ldrs.s: New test.
ld/testsuite/
* ld-arm/group-relocs-alu-bad.d: New test.
* ld-arm/group-relocs-alu-bad.s: New test.
* ld-arm/group-relocs.d: New test.
* ld-arm/group-relocs-ldc-bad.d: New test.
* ld-arm/group-relocs-ldc-bad.s: New test.
* ld-arm/group-relocs-ldr-bad.d: New test.
* ld-arm/group-relocs-ldr-bad.s: New test.
* ld-arm/group-relocs-ldrs-bad.d: New test.
* ld-arm/group-relocs-ldrs-bad.s: New test.
* ld-arm/group-relocs.s: New test.
* ld-arm/arm-elf.exp: Wire in new tests.
2006-06-12 Fred Fish <fnf@specifix.com>
* emulparams/elf32bmip.sh (OTHER_SECTIONS): Keep the
".mdebug.<abi>" and ".gcc_compiled_long<size>" sections
generated by mips gcc.
* elf32-mips.c: Expand comment about ABI-mandated pagesize values.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): define in a more obvious way.
* elf64-mips.c, elfn32-mips.c (ELF_MAXPAGESIZE): Fix value for IRIX6.
Delete old comments.
(ELF_COMMONPAGESIZE): Define in a more obvious way.
[ ld/ChangeLog ]
* emulparams/elf64bmip.sh, emulparams/elf64btsmip.sh (COMMONPAGESIZE):
Define.
[ ld/testsuite/ChangeLog ]
* ld-mips-elf/multi-got-no-shared.d: Adjust for recent change of
ELF_MAXPAGESIZE.
* elfxx-mips.c (mips_elf_link_hash_table): Add function_stub_size.
(STUB_ORI): New macro.
(STUB_LI16U): Fix formatting.
(MIPS_FUNCTION_STUB_SIZE): Delete.
(MIPS_FUNCTION_STUB_MAX_SIZE): Likewise.
(MIPS_FUNCTION_STUB_NORMAL_SIZE): New macro.
(MIPS_FUNCTION_STUB_BIG_SIZE): Likewise.
(_bfd_mips_elf_adjust_dynamic_symbol): Use htab->function_stub_size
instead of MIPS_FUNCTION_STUB_SIZE.
(count_section_dynsyms): New function, split out from
_bfd_mips_elf_final_link.
(_bfd_mips_elf_always_size_sections): Get a worst-case estimate
of the number of dynamic symbols needed and use it to set up
function_stub_size. Use function_stub_size rather than
MIPS_FUNCTION_STUB_SIZE to determine the size of the stub section.
Use 16-byte stubs for 0x10000 dynamic symbols.
(_bfd_mips_elf_size_dynamic_sections): Use htab->function_stub_size
instead of MIPS_FUNCTION_STUB_SIZE. Fix formatting.
(_bfd_mips_elf_finish_dynamic_symbol): Likewise. Change the
size of the stub buffer from MIPS_FUNCTION_STUB_MAX_SIZE to
MIPS_FUNCTION_STUB_BIG_SIZE. Tweak the check for unhandled dynindxes.
Use MIPS_FUNCTION_STUB_BIG_SIZE rather than a hard-coded 20.
Use STUB_ORI rather than STUB_LI16U for big stubs.
(_bfd_mips_elf_link_hash_table_create): Initialize function_stub_size.
(_bfd_mips_elf_final_link): Use count_section_dynsyms.
ld/testsuite/
* ld-mips-elf/stub-dynsym-1.s,
* ld-mips-elf/stub-dynsym-1.ld,
* ld-mips-elf/stub-dynsym-1-7fff.d,
* ld-mips-elf/stub-dynsym-1-8000.d,
* ld-mips-elf/stub-dynsym-1-fff0.d,
* ld-mips-elf/stub-dynsym-1-10000.d,
* ld-mips-elf/stub-dynsym-1-2fe80.d: New test.
* ld-mips-elf/mips-elf.exp: Run it.
* ldlang.c (struct out_section_hash_entry): Rename from
output_statement_hash_entry. Delete output_section_statement_type
entry. Add statement_union_type entry. Adjust all users.
(output_section_statement_table): Rename from output_statement_table.
Adjust all users.
(output_section_statement_newfunc): Rename from
output_statement_newfunc. Adjust all users.
(output_section_statement_table_init): Rename from
output_statement_table_init. Adjust all users.
(output_section_statement_table_free): Rename from
output_statement_table_free. Adjust all users.
PR ld/2723
* elflink.c (bfd_elf_final_link): Don't output section symbols
for special ELF sections.
ld/testsuite/
Update for removal of some section syms.
* elflink.c (_bfd_elf_add_dynamic_entry): Remove DT_TEXTREL
check.
(bfd_elf_final_link): Add a late DT_TEXTREL check.
* elfxx-mips.c (MIPS_ELF_READONLY_SECTION): Define.
(mips_elf_create_dynamic_relocation): Set DF_TEXTREL.
(_bfd_mips_elf_check_relocs): Delete MIPS_READONLY_SECTION.
Use MIPS_ELF_READONLY_SECTION.
(_bfd_mips_elf_size_dynamic_sections): Clear DF_TEXTREL after
creating DT_TEXTREL.
(_bfd_mips_elf_finish_dynamic_sections): Clear textrel markers
if no text relocations were generated.
ld/testsuite/
* ld-mips-elf/textrel-1.d: Relax some patterns.
2006-05-11 Carlos O'Donell <carlos@codesourcery.com>
* bfd.texinfo: Rename "Index" to "BFD Index"
gas/
2006-05-11 Carlos O'Donell <carlos@codesourcery.com>
* doc/as.texinfo: Rename "Index" to "AS Index",
and "ABORT" to "ABORT (COFF)".
ld/
2006-05-11 Carlos O'Donell <carlos@codesourcery.com>
* ld.texinfo: Rename "Index" to "LD Index"
2006-04-06 H.J. Lu <hongjiu.lu@intel.com>
* elfxx-ia64.c (elfNN_ia64_relax_section): Skip unneeded passes
with the skip_relax_pass_0 and skip_relax_pass_1 bits in the
section structure.
include/
2006-04-06 H.J. Lu <hongjiu.lu@intel.com>
* bfdlink.h (bfd_link_info): Replace need_relax_finalize with
relax_pass.
ld/
2006-04-06 H.J. Lu <hongjiu.lu@intel.com>
* emultempl/ia64elf.em: Set link_info.relax_pass to 2. Remove
link_info.need_relax_finalize.
* ldlang.c (relax_sections): New.
(lang_process): Use. Call relax_sections link_info.relax_pass
times.
* ldmain.c (main): Set link_info.relax_pass to 1. Remove
link_info.need_relax_finalize.
(mips_elf_local_got_index): Use the hash table entry to record
the GOT index of forced-local symbols.
(mips_elf_initialize_tls_index): Rearrange code. Store the index
in either the hash table entry or the mips_got_entry, not both.
Add more commentary.
(mips_elf_multi_got): Make sure the g->next is nonnull when calling
mips_elf_initialize_tls_index.
* ld-mips-elf/tls-hidden3a.s, ld-mips-elf/tls-hidden3b.s,
* ld-mips-elf/tls-hidden3.d, ld-mips-elf/tls-hidden3.got,
* ld-mips-elf/tls-hidden3.ld, ld-mips-elf/tls-hidden3.r,
* ld-mips-elf/tls-hidden4a.s, ld-mips-elf/tls-hidden4b.s,
* ld-mips-elf/tls-hidden4.got, ld-mips-elf/tls-hidden4.r: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
* cpu-m68k.c (bfd_m68k_compatible): Treat ISA A+ and ISA B code as
incompatible. Likewise MAC and EMAC code.
* elf32-m68k.c (elf32_m68k_merge_private_bfd_data): Use
bfd_get_compatible to set the new bfd architecture. Rely on it
to detect incompatibilities.
gas/
* config/tc-m68k.c (m68k_cpus): Change cpu_cf5208 entries to use
mcfemac instead of mcfmac.
ld/testsuite/
* ld-m68k/merge-error-1a.s, ld-m68k/merge-error-1b.s,
* ld-m68k/merge-error-1a.d, ld-m68k/merge-error-1b.d,
* ld-m68k/merge-error-1c.d, ld-m68k/merge-error-1d.d,
* ld-m68k/merge-error-1e.d, ld-m68k/merge-ok-1a.d,
* ld-m68k/merge-ok-1b.d: New tests.
* ld-m68k/m68k.exp: Run them.
Daniel Jacobowitz <dan@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Zack Weinberg <zack@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
bfd/
* bfd-in2.h: Regenerate.
* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
(bfd_elf32_littlemips_vec): Likewise.
(bfd_elf32_nbigmips_vec): Likewise.
(bfd_elf32_nlittlemips_vec): Likewise.
(bfd_elf32_ntradbigmips_vec): Likewise.
(bfd_elf32_ntradlittlemips_vec): Likewise.
(bfd_elf32_tradbigmips_vec): Likewise.
(bfd_elf32_tradlittlemips_vec): Likewise.
(bfd_elf64_bigmips_vec): Likewise.
(bfd_elf64_littlemips_vec): Likewise.
(bfd_elf64_tradbigmips_vec): Likewise.
(bfd_elf64_tradlittlemips_vec): Likewise.
* elf32-mips.c: Include elf-vxworks.h.
(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
instead of calling mips_elf32_rtype_to_howto directly.
(mips_vxworks_copy_howto_rela): New reloc howto.
(mips_vxworks_jump_slot_howto_rela): Likewise.
(mips_vxworks_bfd_reloc_type_lookup): New function.
(mips_vxworks_rtype_to_howto): Likewise.
(mips_vxworks_final_write_processing): Likewise.
(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
(elf_backend_want_got_plt): Likewise.
(elf_backend_want_plt_sym): Likewise.
(elf_backend_got_symbol_offset): Likewise.
(elf_backend_want_dynbss): Likewise.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_got_header_size: Likewise.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_finish_dynamic_symbol): Likewise.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing: Likewise.
(elf_backend_additional_program_headers): Likewise.
(elf_backend_modify_segment_map): Likewise.
(elf_backend_symbol_processing): Likewise.
* elfxx-mips.c: Include elf-vxworks.h.
(mips_elf_link_hash_entry): Add is_relocation_target and
is_branch_target fields.
(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
Return 3 for VxWorks.
(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
mips_elf_link_hash_table. Return 0 for VxWorks.
(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
mips_elf_link_hash_table. Update the call to ELF_MIPS_GP_OFFSET.
(mips_vxworks_exec_plt0_entry): New variable.
(mips_vxworks_exec_plt_entry): Likewise.
(mips_vxworks_shared_plt0_entry): Likewise.
(mips_vxworks_shared_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
(mips_elf_rel_dyn_section): Change the bfd argument to a
mips_elf_link_hash_table. Use MIPS_ELF_REL_DYN_NAME to get
the name of the section.
(mips_elf_initialize_tls_slots): Update the call to
mips_elf_rel_dyn_section.
(mips_elf_gotplt_index): New function.
(mips_elf_local_got_index): Add an input_section argument.
Update the call to mips_elf_create_local_got_entry.
(mips_elf_got_page): Likewise.
(mips_elf_got16_entry): Likewise.
(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
arguments. Create dynamic relocations for each entry on VxWorks.
(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
and MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Update the uses of
MIPS_ELF_GOT_MAX_SIZE. Create .got.plt on VxWorks.
(is_gott_symbol): New function.
(mips_elf_calculate_relocation): Use a dynobj local variable.
Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
mips_elf_got_page_entry. Set G to the .got.plt entry when calculating
VxWorks R_MIPS_CALL* relocations. Calculate and use G for all GOT
relocations on VxWorks. Add dynamic relocations for references
to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Don't
create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
in VxWorks executables.
(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
Don't allocate a null entry on VxWorks.
(mips_elf_create_dynamic_relocation): Update the call to
mips_elf_rel_dyn_section. Use absolute rather than relative
relocations for VxWorks, and make them RELA rather than REL.
(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
read-only on VxWorks. Update the call to mips_elf_rel_dyn_section.
Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
VxWorks. Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
Call elf_vxworks_create_dynamic_sections for VxWorks and
initialize the plt_header_size and plt_entry_size fields.
(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
used in VxWorks executables. Don't allocate dynamic relocations
for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
Set is_relocation_target for each symbol referenced by a relocation.
Allocate .rela.dyn entries for relocations against the special
VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Create GOT
entries for all VxWorks R_MIPS_GOT16 relocations. Don't allocate
a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations. Update the calls
to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
relocations. Don't set no_fn_stub on VxWorks.
(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
mips_elf_allocate_dynamic_relocations.
(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
entries for VxWorks, and do not create multiple GOTs.
(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
Handle .got specially for VxWorks. Update the uses of
MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
Check for sgotplt and splt. Allocate the .rel(a).dyn contents last,
once its final size is known. Set DF_TEXTREL for VxWorks. Add
DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
tags on VxWorks. Do not add the MIPS-specific tags for VxWorks.
(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
(mips_vxworks_finish_exec_plt): Likewise.
(mips_vxworks_finish_shared_plt): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
to mips_elf_rel_dyn_section. Use a VxWorks-specific value of
DT_PLTGOT. Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
DT_PLTRELSZ and DT_JMPREL. Update the uses of MIPS_RESERVED_GOTNO
and mips_elf_rel_dyn_section. Use a different GOT header for
VxWorks. Don't sort .rela.dyn on VxWorks. Finish the PLT on VxWorks.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): New function.
(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
on VxWorks. Update the call to ELF_MIPS_GP_OFFSET.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_link_hash_table_create): Likewise.
* libbfd.h: Regenerate.
* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
(elf32-mips.lo): Likewise.
* Makefile.in: Regenerate.
* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(_bfd_target_vector): Add entries for them.
gas/
* config/tc-mips.c (mips_target_format): Handle vxworks targets.
(md_begin): Complain about -G being used for PIC. Don't change
the text, data and bss alignments on VxWorks.
(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
generating VxWorks PIC.
(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
(macro): Likewise, but do not treat la $25 specially for
VxWorks PIC, and do not handle jal.
(OPTION_MVXWORKS_PIC): New macro.
(md_longopts): Add -mvxworks-pic.
(md_parse_option): Don't complain about using PIC and -G together here.
Handle OPTION_MVXWORKS_PIC.
(md_estimate_size_before_relax): Always use the first relaxation
sequence on VxWorks.
* config/tc-mips.h (VXWORKS_PIC): New.
gas/testsuite/
* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
* gas/mips/vxworks1-xgot.d: New tests.
* gas/mips/mips.exp: Run them. Do not run other tests on VxWorks.
include/elf/
* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.
ld/
* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
separate VxWorks emulations.
* emulparams/elf32ebmipvxworks.sh: New file.
* emulparams/elf32elmipvxworks.sh: New file.
* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
eelf32elmipvxworks.o.
(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
* ld-mips/vxworks2-static.sd: New tests.
* ld-mips/mips-elf.exp: Run them.
* elf32-ppc.c (ppc_elf_relocate_section): Copy addend from
first relocation to the second when relaxing TLS GD to LE;
zero it out when relaxing to IE.
ld/testsuite/ChangeLog:
* ld-powerpc/tls32.s: Verify that +32768 @plt addend is
discarded.
* elf32-mips.c (mips_elf_adjust_addend): New function, mostly split
out from...
(_bfd_mips_elf_relocate_section): ...here. Use it to adjust r_addend
for final links too.
ld/testsuite/
* ld-mips/emit-relocs-1a.s, ld-mips/emit-relocs-1b.s,
* ld-mips/emit-relocs-1.ld, ld-mips/emit-relocs-1.d: New test.
* ld-mips/mips-elf.exp: Run it.
* configure.in (bfd_elf32_bigarm_vec): Include elf-vxworks.lo.
(bfd_elf32_bigarm_symbian_vec): Likewise.
(bfd_elf32_bigarm_vxworks_vec): Likewise.
(bfd_elf32_littlearm_vec): Likewise.
(bfd_elf32_littlearm_symbian_vec): Likewise.
(bfd_elf32_littlearm_vxworks_vec): Likewise.
* configure: Regenerate.
* elf32-arm.c: Include libiberty.h and elf-vxworks.h.
(RELOC_SECTION, RELOC_SIZE, SWAP_RELOC_IN, SWAP_RELOC_OUT): New macros.
(elf32_arm_vxworks_bed): Add forward declaration.
(elf32_arm_howto_table_1): Fix the masks for R_ASM_ABS12.
(elf32_arm_vxworks_exec_plt0_entry): New table.
(elf32_arm_vxworks_exec_plt_entry): Likewise.
(elf32_arm_vxworks_shared_plt_entry): Likewise.
(elf32_arm_link_hash_table): Add vxworks_p and srelplt2 fields.
(reloc_section_p): New function.
(create_got_section): Use RELOC_SECTION.
(elf32_arm_create_dynamic_sections): Likewise. Call
elf_vxworks_create_dynamic_sections for VxWorks targets.
Choose between the two possible values of plt_header_size
and plt_entry_size.
(elf32_arm_link_hash_table_create): Initialize vxworks_p and srelplt2.
(elf32_arm_abs12_reloc): New function.
(elf32_arm_final_link_relocate): Call it. Allow the creation of
dynamic R_ARM_ABS12 relocs on VxWorks. Use reloc_section_p,
RELOC_SIZE, SWAP_RELOC_OUT and RELOC_SECTION. Initialize the
r_addend fields of relocs. On rela targets, skip any code that
adjusts in-place addends. When using _bfd_link_final_relocate
to perform a final relocation, pass rel->r_addend as the addend
argument.
(elf32_arm_merge_private_bfd_data): If one of the bfds is a VxWorks
object, ignore flags that are not standard on VxWorks.
(elf32_arm_check_relocs): Allow the creation of dynamic R_ARM_ABS12
relocs on VxWorks. Use reloc_section_p.
(elf32_arm_adjust_dynamic_symbol): Use RELOC_SECTION and RELOC_SIZE.
(allocate_dynrelocs): Use RELOC_SIZE. Account for the size of
.rela.plt.unloaded relocs on VxWorks targets.
(elf32_arm_size_dynamic_sections): Use RELOC_SIZE. Check for
.rela.plt.unloaded as well as .rel(a).plt. Add DT_RELA* tags
instead of DT_REL* tags on RELA targets.
(elf32_arm_finish_dynamic_symbol): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle VxWorks
PLT entries. Do not make _GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(elf32_arm_finish_dynamic_sections): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle DT_RELASZ
like DT_RELSZ. Handle the VxWorks form of initial PLT entry.
Correct the .rela.plt.unreloaded symbol indexes.
(elf32_arm_output_symbol_hook): Call the VxWorks version of this
hook on VxWorks targets.
(elf32_arm_vxworks_link_hash_table_create): Set vxworks_p to true.
Minor formatting tweak.
(elf32_arm_vxworks_final_write_processing): New function.
(elf_backend_add_symbol_hook): Override for VxWorks and reset
for Symbian.
(elf_backend_final_write_processing): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_want_plt_sym): Likewise.
(ELF_MAXPAGESIZE): Likewise.
(elf_backend_may_use_rel_p): Minor formatting tweak.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_rela_normal): Likewise.
* Makefile.in (elf32-arm.lo): Depend on elf-vxworks.h.
gas/
* config/tc-arm.c (md_apply_fix): Install a value of zero into a
BFD_RELOC_ARM_OFFSET_IMM field if we're going to generate a RELA
R_ARM_ABS12 reloc.
(tc_gen_reloc): Keep the original fx_offset for RELA pc-relative
relocs, but adjust by md_pcrel_from_section. Create R_ARM_ABS12
relocations for BFD_RELOC_ARM_OFFSET_IMM on RELA targets.
gas/testsuite/
* gas/arm/abs12.s, gas/arm/abs12.d: New test.
* gas/arm/pic.d: Skip for *-*-vxworks*...
* gas/arm/pic_vxworks.d: ...use this version instead.
* gas/arm/unwind_vxworks.d: Fix expected output.
ld/
* emulparams/armelf_vxworks.sh: Include vxworks.sh.
(MAXPAGESIZE): Define.
* emulparams/vxworks.sh: Undefine.
* Makefile.am (earmelf_vxworks.c): Depend on vxworks.sh and vxworks.em.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-arm/vxworks1.dd, ld-arm/vxworks1.ld, ld-arm/vxworks1-lib.dd,
* ld-arm/vxworks1-lib.nd, ld-arm/vxworks1-lib.rd,
* ld-arm/vxworks1-lib.s, ld-arm/vxworks1.rd, ld-arm/vxworks1.s,
* ld-arm/vxworks1-static.d, ld-arm/vxworks2.s, ld-arm/vxworks2.sd,
* ld-arm/vxworks2-static.sd: New tests.
* ld-arm/arm-elf.exp: Run them.
* elf32-ppc.c (is_ppc_elf_target): Return true if the target is
bfd_elf32_powerpc_vxworks_vec.
ld/testsuite/
* ld-i386/vxworks1.ld (.data): New section.
* ld-i386/vxworks1-lib.s: Add a pointer to a local symbol.
* ld-i386/vxworks1-lib.rd: Test for the associated reloc.
* ld-powerpc/vxworks1.ld (.data): New section.
* ld-powerpc/vxworks1-lib.s: Add a pointer to a local symbol.
* ld-powerpc/vxworks1-lib.rd: Test for the associated reloc.
* elf32-i386.c (elf_i386_create_dynamic_sections): Use
elf_vxworks_create_dynamic_sections.
(elf_i386_size_dynamic_sections): Remove VxWorks GOT and PLT
symbol handling.
* elf32-ppc.c (ppc_elf_create_dynamic_sections): Use
elf_vxworks_create_dynamic_sections.
(ppc_elf_size_dynamic_sections): Remove VxWorks GOT and PLT
symbol handling.
* elf-vxworks.c (elf_vxworks_create_dynamic_sections): New function.
* elf-vxworks.h (elf_vxworks_create_dynamic_sections): Declare.
ld/testsuite/
* ld-i386/ld-i386/vxworks1-lib.nd: New test.
* ld-i386/i386.exp: Run it.
* ld-powerpc/ld-powerpc/vxworks1-lib.nd: New test.
* ld-powerpc/powerc.exp: Run it.
* elf32-ppc.c (ppc_elf_plt_type): New enumeration.
(ppc_elf_link_hash_table): Replace old_got and new_got with
plt_type and can_use_new_plt.
(ppc_elf_create_dynamic_sections): Add SEC_HAS_CONTENTS,
SEC_LOAD and SEC_READONLY to the VxWorks .plt flags.
(ppc_elf_check_relocs): Set can_use_new_plt instead of new_plt.
Move from plt_type == PLT_UNSET to PLT_OLD instead of setting old_plt.
(ppc_elf_select_plt_layout): Move from plt_type == PLT_UNSET to
either plt_type == PLT_OLD or plt_type == PLT_NEW. Assert that
this function should not be called for VxWorks targets.
(ppc_elf_tls_setup): Use plt_type instead of old_got.
(allocate_got): Likewise. Rearrange so that max_before_header
is only used for PLT_OLD and PLT_NEW.
(allocate_dynrelocs): Use plt_type instead of old_got and is_vxworks.
(ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relax_section): Likewise.
(ppc_elf_relocate_section): Likewise.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_vxworks_link_hash_table_create): Initialize plt_type.
ld/
* emulparams/elf32ppccommon.sh: New file, extracted from...
* emulparams/elf32ppc.sh: ...here.
* emulparams/elf32ppcvxworks.sh: Include elf32ppccommon.sh
instead of elf32ppc.sh.
(BSS_PLT): Remove override.
* Makefile.am (eelf32lppc.c): Depend on elf32ppccommons.h.
(eelf32lppcnto.c, eelf32lppcsim.c, eelf32ppcnto.c): Likewise.
(eelf32ppc.c, eelf32ppc_fbsd.c, eelf32ppcsimm): Likewise.
(eelf32ppclinux.c): Likewise.
(eelf32ppcvxworks.c): Likewise. Add missing vxworks.sh dependency.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-powerpc/vxworks1-lib.s, ld-powerpc/vxworks1-lib.dd,
* ld-powerpc/vxworks1-lib.rd, ld-powerpc/vxworks1.s,
* ld-powerpc/vxworks1.dd, ld-powerpc/vxworks1.rd,
* ld-powerpc/vxworks1.ld, ld-powerpc/vxworks1.sd: New test.
* ld-powerpc/powerpc.exp: Run it.
* elf32-i386.c (elf_i386_link_hash_table): Add next_tls_desc_index.
(elf_i386_link_hash_table_create): Initialize it.
(elf_i386_compute_jump_table_size): Use it instead of
srelplt->reloc_count.
(allocate_dynrelocs): Likewise.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
ld/testsuite/
* ld-i386/emit-relocs.s, ld-i386/emit-relocs.d: New test.
* ld-i386/i386.exp: Run it.
* config.bfd (mips*el-*-netbsd*, mips*-*-netbsd*): Use
traditional MIPS ELF targets.
gas:
* configure.tgt: set emulation for mips-*-netbsd*
ld:
* configure.tgt (mips*el-*-netbsd*, mips*-*-netbsd*):
Use the traditional target.
PR ld/2290
* NEWS: Updated for the Linux linker search order change.
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Call
gld${EMULATION_NAME}_check_ld_so_conf before checking default
search directories for DT_NEEDED entries.
ld/
* emultempl/armelf.em: Include elf/arm.h.
(arm_elf_finish): Set low address bit if enty point is a Thumb
function.
ld/testsuite/
* ld-arm/arm-elf.exp: Add thumb-entry test.
* ld-arm/thumb-entry.d: New test.
* ld-arm/thumb-entry.s: New test.
* elfxx-mips.c (mips_elf_initialize_tls_index): If a TLS symbol
has already been assigned a GOT index, copy that index to the
current hash table entry.
ld/testsuite/
* ld-mips-elf/tls-hidden2a.s, ld-mips-elf/tls-hidden2b.s,
* ld/testsuite/ld-mips-elf/tls-hidden2.d,
* ld/testsuite/ld-mips-elf/tls-hidden2-got.d: New test.
* ld-mips-elf/mips-elf.exp: Run it.
PR ld/2218
* ld-pie/pie.exp: New file.
* ld-pie/weakundef.c: Likewise.
* ld-pie/weakundef.out: Likewise.
* lib/ld-lib.exp (run_ld_link_exec_tests): Fix nesting. Support
building PIE and shared library.
Richard Sandiford
Mark Shinwell
Alan Modra
Bob Wilson
Jakub Jelinek
Mike Frysinger
Nick Clifton
Kaz Kojima
H.J. Lu
Andreas Schwab
Thiemo Seufer
Richard Earnshaw
Nathan Sidwell
Paul Brook
Christopher Faylor
Daniel Jacobowitz
Hans-Peter Nilsson
Fred Fish
Joseph Myers
Carlos O'Donell
Ben Elliston
Eric Botcazou
Danny Smith
Bernd Schmidt
Alexandre Oliva
Nick Hudson
Eric Christopher
Jie Zhang