Alan Modra
ddb000396c
Remove arm-epoc-pe support
...
bfd/
* Makefile.am: Remove arm-epoc-pe support.
* coff-arm.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* epoc-pe-arm.c: Delete.
* epoc-pei-arm.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* configure.ac: Remove arm-epoc-pe support.
* dlltool.c: Likewise.
* configure: Regenerate.
gas/
* Makefile.am: Remove arm-epoc-pe support.
* config/tc-arm.h: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/all/gas.exp: Likewise.
* testsuite/gas/arm/local_label_coff.d: Likewise.
* testsuite/gas/arm/undefined.d: Likewise.
* testsuite/gas/arm/undefined_coff.d: Likewise.
* config/te-epoc-pe.h: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove arm-epoc-pe support.
* configure.tgt: Likewise.
* emultempl/pe.em: Likewise.
* pe-dll.c: Likewise.
* testsuite/ld-scripts/fill.d: Likewise.
* testsuite/ld-scripts/fill16.d: Likewise.
* emulparams/arm_epoc_pe.sh: Delete.
* scripttempl/epocpe.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
2018-04-16 20:29:05 +09:30
Alan Modra
c9098af41e
Remove sparc-aout and sparc-coff support
...
bfd/
* Makefile.am: Remove sparc-aout and sparc-coff support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* aout-sparcle.c: Delete.
* aoutf1.h: Delete.
* cf-sparclynx.c: Delete.
* coff-sparc.c: Delete.
* demo64.c: Delete.
* sparclinux.c: Delete.
* sparclynx.c: Delete.
* sparcnetbsd.c: Delete.
* sunos.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/lib/binutils-common.exp: Remove sparc-aout and
sparc-coff support.
gas/
* Makefile.am: Remove sparc-aout and sparc-coff support.
* config/obj-coff.h: Likewise.
* config/tc-sparc.c: Likewise.
* config/tc-sparc.h: Likewise.
* configure.tgt: Likewise.
* config/te-sparcaout.h: Delete.
* testsuite/gas/sun4/addend.d: Delete.
* testsuite/gas/sun4/addend.exp: Delete.
* testsuite/gas/sun4/addend.s: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove sparc-aout and sparc-coff support.
* configure.tgt: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* emulparams/coff_sparc.sh: Delete.
* emulparams/sparcaout.sh: Delete.
* emulparams/sparclinux.sh: Delete.
* emulparams/sparcnbsd.sh: Delete.
* emulparams/sun4.sh: Delete.
* scripttempl/sparccoff.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
2018-04-16 15:33:26 +09:30
Alan Modra
dc12032bca
Remove m68k-aout and m68k-coff support
...
include/
* aout/host.h: Remove m68k-aout and m68k-coff support.
* aout/hp300hpux.h: Delete.
* coff/apollo.h: Delete.
* coff/aux-coff.h: Delete.
* coff/m68k.h: Delete.
bfd/
* Makefile.am: Remove m68k-aout and m68k-coff support.
* aoutf1.h: Likewise.
* aoutx.h: Likewise.
* archive.c: Likewise.
* bfd-in.h: Likewise.
* bfd.c: Likewise.
* coffcode.h: Likewise.
* coffswap.h: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* configure.host: Likewise.
* doc/bfd.texinfo: Likewise.
* doc/bfdint.texi: Likewise.
* freebsd.h: Likewise.
* gen-aout.c: Likewise.
* hpux-core.c: Likewise.
* libaout.h: Likewise.
* libbfd-in.h: Likewise.
* pdp11.c: Likewise.
* peicode.h: Likewise.
* riscix.c: Likewise.
* targets.c: Likewise.
* aout0.c: Delete.
* coff-apollo.c: Delete.
* coff-aux.c: Delete.
* coff-m68k.c: Delete.
* coff-svm68k.c: Delete.
* coff-u68k.c: Delete.
* hosts/delta68.h: Delete.
* hosts/hp300bsd.h: Delete.
* hosts/m68kaux.h: Delete.
* hosts/news.h: Delete.
* hp300bsd.c: Delete.
* hp300hpux.c: Delete.
* liboasys.h: Delete.
* m68k4knetbsd.c: Delete.
* m68klinux.c: Delete.
* m68knetbsd.c: Delete.
* oasys.c: Delete.
* versados.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff
support.
* testsuite/binutils-all/copy-3.d: Likewise.
* testsuite/binutils-all/objcopy.exp: Likewise.
* testsuite/lib/binutils-common.exp: Likewise.
gas/
* Makefile.am: Remove m68k-aout and m68k-coff support.
* config/tc-m68k.c: Likewise.
* config/tc-m68k.h: Likewise.
* configure.ac: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/all/weakref1u.d: Likewise.
* testsuite/gas/m68k/all.exp: Likewise.
* testsuite/gas/m68k/br-isaa.d: Likewise.
* testsuite/gas/m68k/br-isab.d: Likewise.
* testsuite/gas/m68k/br-isac.d: Likewise.
* config/te-psos.h: Delete.
* config/te-sun3.h: Delete.
* testsuite/gas/m68k-coff/gas.exp: Delete.
* testsuite/gas/m68k-coff/p2389.s: Delete.
* testsuite/gas/m68k-coff/p2389a.s: Delete.
* testsuite/gas/m68k-coff/p2430.s: Delete.
* testsuite/gas/m68k-coff/p2430a.s: Delete.
* testsuite/gas/m68k-coff/t1.s: Delete.
* testsuite/gas/m68k/p3041.d: Delete.
* testsuite/gas/m68k/p3041.s: Delete.
* testsuite/gas/m68k/p3041data.d: Delete.
* testsuite/gas/m68k/p3041data.s: Delete.
* testsuite/gas/m68k/p3041pcrel.d: Delete.
* testsuite/gas/m68k/p3041pcrel.s: Delete.
* testsuite/gas/m68k/t2.d: Delete.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove m68k-aout and m68k-coff support.
* configure.tgt: Likewise.
* emultempl/m68kelf.em: Likewise.
* ld.texinfo: Likewise.
* mri.c: Likewise.
* emulparams/delta68.sh: Delete.
* emulparams/hp300bsd.sh: Delete.
* emulparams/hp3hpux.sh: Delete.
* emulparams/m68k4knbsd.sh: Delete.
* emulparams/m68kaout.sh: Delete.
* emulparams/m68kaux.sh: Delete.
* emulparams/m68kcoff.sh: Delete.
* emulparams/m68klinux.sh: Delete.
* emulparams/m68knbsd.sh: Delete.
* emulparams/m68kpsos.sh: Delete.
* emulparams/sun3.sh: Delete.
* emultempl/m68kcoff.em: Delete.
* scripttempl/delta68.sc: Delete.
* scripttempl/m68kaux.sc: Delete.
* scripttempl/m68kcoff.sc: Delete.
* scripttempl/psos.sc: Delete.
* testsuite/ld-versados/t1-1.ro: Delete.
* testsuite/ld-versados/t1-2.ro: Delete.
* testsuite/ld-versados/t1.ld: Delete.
* testsuite/ld-versados/t1.ook: Delete.
* testsuite/ld-versados/t2-1.ro: Delete.
* testsuite/ld-versados/t2-2.ro: Delete.
* testsuite/ld-versados/t2-3.ro: Delete.
* testsuite/ld-versados/t2.ld: Delete.
* testsuite/ld-versados/t2.ook: Delete.
* testsuite/ld-versados/versados.exp: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
2018-04-16 15:31:36 +09:30
Alan Modra
211dc24b87
Remove sh5 and sh64 support
...
include/
* dis-asm.h: Remove sh5 and sh64 support.
bfd/
* Makefile.am: Remove sh5 and sh64 support.
* archures.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* cpu-sh.c: Likewise.
* elf32-sh-relocs.h: Likewise.
* elf32-sh.c: Likewise.
* targets.c: Likewise.
* elf32-sh64-com.c: Delete.
* elf32-sh64.c: Delete.
* elf32-sh64.h: Delete.
* elf64-sh64.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* Makefile.am: Remove sh5 and sh64 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Delete.
* sh64-opc.c: Delete.
* sh64-opc.h: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
bintuils/
* testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support.
gas/
* Makefile.am: Remove sh5 and sh64 support.
* config/tc-sh.c: Likewise.
* configure.tgt: Likewise.
* doc/Makefile.am: Likewise.
* doc/as.texinfo: Likewise.
* testsuite/gas/cfi/cfi.exp: Likewise.
* testsuite/gas/sh/basic.exp: Likewise.
* config/tc-sh64.c: Delete.
* config/tc-sh64.h: Delete.
* doc/c-sh64.texi: Delete.
* testsuite/gas/sh/sh64/abi-32.d: Delete.
* testsuite/gas/sh/sh64/abi-32.s: Delete.
* testsuite/gas/sh/sh64/abi-64.d: Delete.
* testsuite/gas/sh/sh64/abi-64.s: Delete.
* testsuite/gas/sh/sh64/basic-1.d: Delete.
* testsuite/gas/sh/sh64/basic-1.s: Delete.
* testsuite/gas/sh/sh64/case-1.d: Delete.
* testsuite/gas/sh/sh64/case-1.s: Delete.
* testsuite/gas/sh/sh64/case-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/crange1-1.d: Delete.
* testsuite/gas/sh/sh64/crange1-2.d: Delete.
* testsuite/gas/sh/sh64/crange1.s: Delete.
* testsuite/gas/sh/sh64/crange2-1.d: Delete.
* testsuite/gas/sh/sh64/crange2-2.d: Delete.
* testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/crange2.s: Delete.
* testsuite/gas/sh/sh64/crange3-1.d: Delete.
* testsuite/gas/sh/sh64/crange3.s: Delete.
* testsuite/gas/sh/sh64/crange4-1.d: Delete.
* testsuite/gas/sh/sh64/crange4.s: Delete.
* testsuite/gas/sh/sh64/crange5-1.d: Delete.
* testsuite/gas/sh/sh64/crange5.s: Delete.
* testsuite/gas/sh/sh64/creg-1.d: Delete.
* testsuite/gas/sh/sh64/creg-1.s: Delete.
* testsuite/gas/sh/sh64/creg-2.d: Delete.
* testsuite/gas/sh/sh64/creg-2.s: Delete.
* testsuite/gas/sh/sh64/datal-1.s: Delete.
* testsuite/gas/sh/sh64/datal-2.d: Delete.
* testsuite/gas/sh/sh64/datal-2.s: Delete.
* testsuite/gas/sh/sh64/datal-3.s: Delete.
* testsuite/gas/sh/sh64/datal32-1.d: Delete.
* testsuite/gas/sh/sh64/datal32-3.d: Delete.
* testsuite/gas/sh/sh64/datal64-1.d: Delete.
* testsuite/gas/sh/sh64/datal64-3.d: Delete.
* testsuite/gas/sh/sh64/eh-1.d: Delete.
* testsuite/gas/sh/sh64/eh-1.s: Delete.
* testsuite/gas/sh/sh64/endian-1.d: Delete.
* testsuite/gas/sh/sh64/endian-1.s: Delete.
* testsuite/gas/sh/sh64/endian-2.d: Delete.
* testsuite/gas/sh/sh64/endian-2.s: Delete.
* testsuite/gas/sh/sh64/err-1.s: Delete.
* testsuite/gas/sh/sh64/err-2.s: Delete.
* testsuite/gas/sh/sh64/err-3.s: Delete.
* testsuite/gas/sh/sh64/err-4.s: Delete.
* testsuite/gas/sh/sh64/err-abi-32.s: Delete.
* testsuite/gas/sh/sh64/err-abi-64.s: Delete.
* testsuite/gas/sh/sh64/err-dsp.s: Delete.
* testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete.
* testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete.
* testsuite/gas/sh/sh64/err-pt-1.s: Delete.
* testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete.
* testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete.
* testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete.
* testsuite/gas/sh/sh64/err-ptb-1.s: Delete.
* testsuite/gas/sh/sh64/err-ptb-2.s: Delete.
* testsuite/gas/sh/sh64/err.exp: Delete.
* testsuite/gas/sh/sh64/immexpr1.s: Delete.
* testsuite/gas/sh/sh64/immexpr2.s: Delete.
* testsuite/gas/sh/sh64/immexpr32-1.d: Delete.
* testsuite/gas/sh/sh64/immexpr32-2.d: Delete.
* testsuite/gas/sh/sh64/immexpr64-1.d: Delete.
* testsuite/gas/sh/sh64/immexpr64-2.d: Delete.
* testsuite/gas/sh/sh64/lineno.d: Delete.
* testsuite/gas/sh/sh64/lineno.s: Delete.
* testsuite/gas/sh/sh64/localcom-1.d: Delete.
* testsuite/gas/sh/sh64/localcom-1.s: Delete.
* testsuite/gas/sh/sh64/mix-1.d: Delete.
* testsuite/gas/sh/sh64/mix-1.s: Delete.
* testsuite/gas/sh/sh64/mix-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/movi-1.s: Delete.
* testsuite/gas/sh/sh64/movi-2.s: Delete.
* testsuite/gas/sh/sh64/movi-3.d: Delete.
* testsuite/gas/sh/sh64/movi-3.s: Delete.
* testsuite/gas/sh/sh64/movi32-1.d: Delete.
* testsuite/gas/sh/sh64/movi32-2.d: Delete.
* testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/movi64-1.d: Delete.
* testsuite/gas/sh/sh64/movi64-2.d: Delete.
* testsuite/gas/sh/sh64/movi64-2.s: Delete.
* testsuite/gas/sh/sh64/movi64-3.d: Delete.
* testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/pt-1.d: Delete.
* testsuite/gas/sh/sh64/pt-1.s: Delete.
* testsuite/gas/sh/sh64/pt-2.s: Delete.
* testsuite/gas/sh/sh64/pt-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/pt32-1.d: Delete.
* testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/pt64-1.d: Delete.
* testsuite/gas/sh/sh64/pt64-32-1.d: Delete.
* testsuite/gas/sh/sh64/pt64-32-2.d: Delete.
* testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/ptc-1.s: Delete.
* testsuite/gas/sh/sh64/ptc32-1.d: Delete.
* testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/ptc64-1.d: Delete.
* testsuite/gas/sh/sh64/ptc64-32-1.d: Delete.
* testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/ptext-1.s: Delete.
* testsuite/gas/sh/sh64/ptext32-1.d: Delete.
* testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/ptext64-1.d: Delete.
* testsuite/gas/sh/sh64/ptext64-32-1.d: Delete.
* testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/rel-1.s: Delete.
* testsuite/gas/sh/sh64/rel-2.s: Delete.
* testsuite/gas/sh/sh64/rel-3.s: Delete.
* testsuite/gas/sh/sh64/rel-4.s: Delete.
* testsuite/gas/sh/sh64/rel-5.s: Delete.
* testsuite/gas/sh/sh64/rel32-1.d: Delete.
* testsuite/gas/sh/sh64/rel32-2.d: Delete.
* testsuite/gas/sh/sh64/rel32-3.d: Delete.
* testsuite/gas/sh/sh64/rel32-4.d: Delete.
* testsuite/gas/sh/sh64/rel32-5.d: Delete.
* testsuite/gas/sh/sh64/rel64-1.d: Delete.
* testsuite/gas/sh/sh64/rel64-2.d: Delete.
* testsuite/gas/sh/sh64/rel64-3.d: Delete.
* testsuite/gas/sh/sh64/rel64-4.d: Delete.
* testsuite/gas/sh/sh64/rel64-5.d: Delete.
* testsuite/gas/sh/sh64/relax-1.d: Delete.
* testsuite/gas/sh/sh64/relax-1.s: Delete.
* testsuite/gas/sh/sh64/relax-2.d: Delete.
* testsuite/gas/sh/sh64/relax-2.s: Delete.
* testsuite/gas/sh/sh64/relax-3.d: Delete.
* testsuite/gas/sh/sh64/relax-3.s: Delete.
* testsuite/gas/sh/sh64/sh64.exp: Delete.
* testsuite/gas/sh/sh64/shift-1.s: Delete.
* testsuite/gas/sh/sh64/shift-2.s: Delete.
* testsuite/gas/sh/sh64/shift-3.s: Delete.
* testsuite/gas/sh/sh64/shift32-1.d: Delete.
* testsuite/gas/sh/sh64/shift32-3.d: Delete.
* testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete.
* testsuite/gas/sh/sh64/shift64-1.d: Delete.
* testsuite/gas/sh/sh64/shift64-2.d: Delete.
* testsuite/gas/sh/sh64/shift64-3.d: Delete.
* testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete.
* testsuite/gas/sh/sh64/syntax-1.d: Delete.
* testsuite/gas/sh/sh64/syntax-1.s: Delete.
* testsuite/gas/sh/sh64/syntax-2.d: Delete.
* testsuite/gas/sh/sh64/syntax-2.s: Delete.
* testsuite/gas/sh/sh64/ua-1.s: Delete.
* testsuite/gas/sh/sh64/ua32-1.d: Delete.
* testsuite/gas/sh/sh64/ua64-1.d: Delete.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove sh5 and sh64 support.
* configure.tgt: Likewise.
* ldlang.c: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-gc/pr13683.d: Likewise.
* testsuite/ld-scripts/crossref.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-sh/ld-r-1.d: Likewise.
* testsuite/ld-sh/rd-sh.exp: Likewise.
* testsuite/ld-sh/sh.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-undefined/undefined.exp: Likewise.
* emulparams/shelf32.sh: Delete.
* emulparams/shelf32_linux.sh: Delete.
* emulparams/shelf32_nbsd.sh: Delete.
* emulparams/shelf64.sh: Delete.
* emulparams/shelf64_nbsd.sh: Delete.
* emulparams/shlelf32.sh: Delete.
* emulparams/shlelf32_linux.sh: Delete.
* emulparams/shlelf32_nbsd.sh: Delete.
* emulparams/shlelf64.sh: Delete.
* emulparams/shlelf64_nbsd.sh: Delete.
* emultempl/sh64elf.em: Delete.
* testsuite/ld-sh/sh64/abi32.sd: Delete.
* testsuite/ld-sh/sh64/abi32.xd: Delete.
* testsuite/ld-sh/sh64/abi64.sd: Delete.
* testsuite/ld-sh/sh64/abi64.xd: Delete.
* testsuite/ld-sh/sh64/abixx-noexp.sd: Delete.
* testsuite/ld-sh/sh64/cmpct1.sd: Delete.
* testsuite/ld-sh/sh64/cmpct1.xd: Delete.
* testsuite/ld-sh/sh64/crange-1.s: Delete.
* testsuite/ld-sh/sh64/crange-2a.s: Delete.
* testsuite/ld-sh/sh64/crange-2b.s: Delete.
* testsuite/ld-sh/sh64/crange-2c.s: Delete.
* testsuite/ld-sh/sh64/crange-2d.s: Delete.
* testsuite/ld-sh/sh64/crange-2e.s: Delete.
* testsuite/ld-sh/sh64/crange-2f.s: Delete.
* testsuite/ld-sh/sh64/crange-2g.s: Delete.
* testsuite/ld-sh/sh64/crange-2h.s: Delete.
* testsuite/ld-sh/sh64/crange-2i.s: Delete.
* testsuite/ld-sh/sh64/crange1.rd: Delete.
* testsuite/ld-sh/sh64/crange2.rd: Delete.
* testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete.
* testsuite/ld-sh/sh64/crange3-media.rd: Delete.
* testsuite/ld-sh/sh64/crange3.dd: Delete.
* testsuite/ld-sh/sh64/crange3.rd: Delete.
* testsuite/ld-sh/sh64/crangerel1.rd: Delete.
* testsuite/ld-sh/sh64/crangerel2.rd: Delete.
* testsuite/ld-sh/sh64/dlsection-1.s: Delete.
* testsuite/ld-sh/sh64/dlsection.sd: Delete.
* testsuite/ld-sh/sh64/endian.dbd: Delete.
* testsuite/ld-sh/sh64/endian.dld: Delete.
* testsuite/ld-sh/sh64/endian.ld: Delete.
* testsuite/ld-sh/sh64/endian.s: Delete.
* testsuite/ld-sh/sh64/endian.sbd: Delete.
* testsuite/ld-sh/sh64/endian.sld: Delete.
* testsuite/ld-sh/sh64/gotplt.d: Delete.
* testsuite/ld-sh/sh64/gotplt.map: Delete.
* testsuite/ld-sh/sh64/gotplt.s: Delete.
* testsuite/ld-sh/sh64/init-cmpct.d: Delete.
* testsuite/ld-sh/sh64/init-media.d: Delete.
* testsuite/ld-sh/sh64/init.s: Delete.
* testsuite/ld-sh/sh64/init64.d: Delete.
* testsuite/ld-sh/sh64/mix1-noexp.sd: Delete.
* testsuite/ld-sh/sh64/mix1.sd: Delete.
* testsuite/ld-sh/sh64/mix1.xd: Delete.
* testsuite/ld-sh/sh64/mix2-noexp.sd: Delete.
* testsuite/ld-sh/sh64/mix2.sd: Delete.
* testsuite/ld-sh/sh64/mix2.xd: Delete.
* testsuite/ld-sh/sh64/rd-sh64.exp: Delete.
* testsuite/ld-sh/sh64/rel-1.s: Delete.
* testsuite/ld-sh/sh64/rel-2.s: Delete.
* testsuite/ld-sh/sh64/rel32.xd: Delete.
* testsuite/ld-sh/sh64/rel64.xd: Delete.
* testsuite/ld-sh/sh64/relax.exp: Delete.
* testsuite/ld-sh/sh64/relax1.s: Delete.
* testsuite/ld-sh/sh64/relax2.s: Delete.
* testsuite/ld-sh/sh64/relax3.s: Delete.
* testsuite/ld-sh/sh64/relax4.s: Delete.
* testsuite/ld-sh/sh64/reldl-1.s: Delete.
* testsuite/ld-sh/sh64/reldl-2.s: Delete.
* testsuite/ld-sh/sh64/reldl32.rd: Delete.
* testsuite/ld-sh/sh64/reldl64.rd: Delete.
* testsuite/ld-sh/sh64/relfail.exp: Delete.
* testsuite/ld-sh/sh64/relfail.s: Delete.
* testsuite/ld-sh/sh64/sh64-1.s: Delete.
* testsuite/ld-sh/sh64/sh64-2.s: Delete.
* testsuite/ld-sh/sh64/sh64.exp: Delete.
* testsuite/ld-sh/sh64/shcmp-1.s: Delete.
* testsuite/ld-sh/sh64/shdl-1.s: Delete.
* testsuite/ld-sh/sh64/shdl-2.s: Delete.
* testsuite/ld-sh/sh64/shdl32.xd: Delete.
* testsuite/ld-sh/sh64/shdl64.sd: Delete.
* testsuite/ld-sh/sh64/shdl64.xd: Delete.
* testsuite/ld-sh/sh64/shmix-1.s: Delete.
* testsuite/ld-sh/sh64/shmix-2.s: Delete.
* testsuite/ld-sh/sh64/shmix-3.s: Delete.
* testsuite/ld-sh/sh64/stobin-0-dso.d: Delete.
* testsuite/ld-sh/sh64/stobin-1.d: Delete.
* testsuite/ld-sh/sh64/stobin.s: Delete.
* testsuite/ld-sh/sh64/stolib.s: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
2018-04-16 15:29:39 +09:30
Alan Modra
4db9937a27
Remove sh-symbianelf support
...
bfd/
* Makefile.am: Remove sh-symbianelf support.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* elf32-sh-symbian.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
gas/
* config/tc-sh.c: Remove sh-symbianelf support.
* config/tc-sh.h: Likewise.
* configure.ac: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/sh/reg-prefix.d: Likewise.
* testsuite/gas/sh/sh2a-pic.d: Likewise.
* config.in: Regenerate.
* configure: Regenerate.
ld/
* Makefile.am: Remove sh-symbianelf support.
* configure.tgt: Likewise.
* emulparams/shlsymbian.sh: Delete.
* scripttempl/elf32sh-symbian.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
2018-04-16 15:27:45 +09:30
Alan Modra
6793974daa
Remove i370 support
...
include/
* elf/i370.h: Delete.
* opcode/i370.h: Delete.
bfd/
* Makefile.am: Remove i370 support.
* archures.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
* cpu-i370.c: Delete.
* elf32-i370.c: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* Makefile.am: Remove i370 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* i370-dis.c: Delete.
* i370-opc.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
binutils/
* readelf.c: Remove i370 support.
* testsuite/binutils-all/objdump.exp: Likewise.
gas/
* Makefile.am: Remove i370 support.
* app.c: Likewise.
* config/obj-elf.c: Likewise.
* configure.tgt: Likewise.
* doc/Makefile.am: Likewise.
* doc/as.texinfo: Likewise.
* testsuite/gas/all/gas.exp: Likewise.
* testsuite/gas/elf/warn-2.s: Likewise.
* testsuite/gas/lns/lns.exp: Likewise.
* config/tc-i370.c: Delete.
* config/tc-i370.h: Delete.
* doc/c-i370.texi: Delete.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am: Remove i370 support.
* configure.tgt: Likewise.
* testsuite/ld-elf/compressed1d.d: Likewise.
* testsuite/ld-elf/group8a.d: Likewise.
* testsuite/ld-elf/group8b.d: Likewise.
* testsuite/ld-elf/group9a.d: Likewise.
* testsuite/ld-elf/group9b.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr12851.d: Likewise.
* testsuite/ld-elf/pr12975.d: Likewise.
* testsuite/ld-elf/pr13177.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elf/pr17615.d: Likewise.
* testsuite/ld-elf/pr21562a.d: Likewise.
* testsuite/ld-elf/pr21562b.d: Likewise.
* testsuite/ld-elf/pr21562c.d: Likewise.
* testsuite/ld-elf/pr21562d.d: Likewise.
* testsuite/ld-elf/pr21562i.d: Likewise.
* testsuite/ld-elf/pr21562j.d: Likewise.
* testsuite/ld-elf/pr21562k.d: Likewise.
* testsuite/ld-elf/pr21562l.d: Likewise.
* testsuite/ld-elf/pr21562m.d: Likewise.
* testsuite/ld-elf/pr21562n.d: Likewise.
* testsuite/ld-elf/pr22677.d: Likewise.
* testsuite/lib/ld-lib.exp: Likewise.
* emulparams/elf32i370.sh: Delete.
* scripttempl/elfi370.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
2018-04-16 15:21:56 +09:30
Alan Modra
b4b594e304
Remove netware support
...
include/
* nlm/ChangeLog-9315: Delete.
* nlm/alpha-ext.h: Delete.
* nlm/common.h: Delete.
* nlm/external.h: Delete.
* nlm/i386-ext.h: Delete.
* nlm/internal.h: Delete.
* nlm/ppc-ext.h: Delete.
* nlm/sparc32-ext.h: Delete.
bfd/
* Makefile.am: Remove netware support.
* bfd-in.h: Likewise.
* bfd.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* doc/bfdint.texi: Likewise.
* ecoff.c: Likewise.
* targets.c: Likewise.
* libnlm.h: Delete.
* nlm-target.h: Delete.
* nlm.c: Delete.
* nlm32-alpha.c: Delete.
* nlm32-i386.c: Delete.
* nlm32-ppc.c: Delete.
* nlm32-sparc.c: Delete.
* nlm32.c: Delete.
* nlm64.c: Delete.
* nlmcode.h: Delete.
* nlmswap.h: Delete.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* .gitignore: Remove netware support.
* Makefile.am: Likewise.
* configure.ac: Likewise.
* doc/Makefile.am: Likewise.
* doc/binutils.texi: Likewise.
* testsuite/binutils-all/nm.exp: Likewise.
* nlmconv.c: Delete.
* nlmconv.h: Delete.
* nlmheader.y: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
gas/
* Makefile.am: Remove netware support.
* config/tc-i386.c: Likewise.
* configure.tgt: Likewise.
* config/te-netware.h: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
gprof/
* corefile.c: Remove netware support.
ld/
* Makefile.am: Remove netware support.
* configure.tgt: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Likewise.
* emulparams/i386nw.sh: Delete.
* emulparams/ppcnw.sh: Delete.
* scripttempl/nw.sc: Delete.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
2018-04-16 15:11:22 +09:30
Alan Modra
a8eb42a8b7
Remove i860, i960, bout and aout-adobe targets
...
Plus remove a few leftovers from the 29k support.
include/
* aout/adobe.h: Delete.
* aout/reloc.h: Delete.
* coff/i860.h: Delete.
* coff/i960.h: Delete.
* elf/i860.h: Delete.
* elf/i960.h: Delete.
* opcode/i860.h: Delete.
* opcode/i960.h: Delete.
* aout/aout64.h (enum reloc_type): Trim off 29k and other unused values.
* aout/ar.h (ARMAGB): Remove.
* coff/internal.h (struct internal_aouthdr, struct internal_scnhdr,
union internal_auxent): Remove i960 support.
bfd/
* aout-adobe.c: Delete.
* bout.c: Delete.
* coff-i860.c: Delete.
* coff-i960.c: Delete.
* cpu-i860.c: Delete.
* cpu-i960.c: Delete.
* elf32-i860.c: Delete.
* elf32-i960.c: Delete.
* hosts/i860mach3.h: Delete.
* Makefile.am: Remove i860, i960, bout, and adobe support.
* archures.c: Remove i860 and i960 support.
* coffcode.h: Likewise.
* reloc.c: Likewise.
* aoutx.h: Comment updates.
* archive.c: Remove BOUT and i960 support.
* bfd.c: Remove BOUT support.
* coffswap.h: Remove i960 support.
* config.bfd: Remove i860, i960 and adobe targets.
* configure.ac: Remove adode, bout, i860, i960, icoff targets.
* targets.c: Likewise.
* ieee.c: Remove i960 support.
* mach-o.c: Remove i860 support.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
opcodes/
* opcodes/i860-dis.c: Delete.
* opcodes/i960-dis.c: Delete.
* Makefile.am: Remove i860 and i960 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
binutils/
* ieee.c: Remove i960 support.
* od-macho.c: Remove i860 support.
* readelf.c: Remove i860 and i960 support.
* testsuite/binutils-all/objcopy.exp: Likewise.
* testsuite/binutils-all/objdump.exp: Likewise.
* testsuite/lib/binutils-common.exp: Likewise.
gas/
* config/aout_gnu.h: Delete.
* config/tc-i860.c: Delete.
* config/tc-i860.h: Delete.
* config/tc-i960.c: Delete.
* config/tc-i960.h: Delete.
* doc/c-i860.texi: Delete.
* doc/c-i960.texi: Delete.
* testsuite/gas/i860/README.i860: Delete.
* testsuite/gas/i860/bitwise.d: Delete.
* testsuite/gas/i860/bitwise.s: Delete.
* testsuite/gas/i860/branch.d: Delete.
* testsuite/gas/i860/branch.s: Delete.
* testsuite/gas/i860/bte.d: Delete.
* testsuite/gas/i860/bte.s: Delete.
* testsuite/gas/i860/dir-align01.d: Delete.
* testsuite/gas/i860/dir-align01.s: Delete.
* testsuite/gas/i860/dir-intel01.d: Delete.
* testsuite/gas/i860/dir-intel01.s: Delete.
* testsuite/gas/i860/dir-intel02.d: Delete.
* testsuite/gas/i860/dir-intel02.s: Delete.
* testsuite/gas/i860/dir-intel03-err.l: Delete.
* testsuite/gas/i860/dir-intel03-err.s: Delete.
* testsuite/gas/i860/dual01.d: Delete.
* testsuite/gas/i860/dual01.s: Delete.
* testsuite/gas/i860/dual02-err.l: Delete.
* testsuite/gas/i860/dual02-err.s: Delete.
* testsuite/gas/i860/dual03.d: Delete.
* testsuite/gas/i860/dual03.s: Delete.
* testsuite/gas/i860/fldst01.d: Delete.
* testsuite/gas/i860/fldst01.s: Delete.
* testsuite/gas/i860/fldst02.d: Delete.
* testsuite/gas/i860/fldst02.s: Delete.
* testsuite/gas/i860/fldst03.d: Delete.
* testsuite/gas/i860/fldst03.s: Delete.
* testsuite/gas/i860/fldst04.d: Delete.
* testsuite/gas/i860/fldst04.s: Delete.
* testsuite/gas/i860/fldst05.d: Delete.
* testsuite/gas/i860/fldst05.s: Delete.
* testsuite/gas/i860/fldst06.d: Delete.
* testsuite/gas/i860/fldst06.s: Delete.
* testsuite/gas/i860/fldst07.d: Delete.
* testsuite/gas/i860/fldst07.s: Delete.
* testsuite/gas/i860/fldst08.d: Delete.
* testsuite/gas/i860/fldst08.s: Delete.
* testsuite/gas/i860/float01.d: Delete.
* testsuite/gas/i860/float01.s: Delete.
* testsuite/gas/i860/float02.d: Delete.
* testsuite/gas/i860/float02.s: Delete.
* testsuite/gas/i860/float03.d: Delete.
* testsuite/gas/i860/float03.s: Delete.
* testsuite/gas/i860/float04.d: Delete.
* testsuite/gas/i860/float04.s: Delete.
* testsuite/gas/i860/form.d: Delete.
* testsuite/gas/i860/form.s: Delete.
* testsuite/gas/i860/i860.exp: Delete.
* testsuite/gas/i860/iarith.d: Delete.
* testsuite/gas/i860/iarith.s: Delete.
* testsuite/gas/i860/ldst01.d: Delete.
* testsuite/gas/i860/ldst01.s: Delete.
* testsuite/gas/i860/ldst02.d: Delete.
* testsuite/gas/i860/ldst02.s: Delete.
* testsuite/gas/i860/ldst03.d: Delete.
* testsuite/gas/i860/ldst03.s: Delete.
* testsuite/gas/i860/ldst04.d: Delete.
* testsuite/gas/i860/ldst04.s: Delete.
* testsuite/gas/i860/ldst05.d: Delete.
* testsuite/gas/i860/ldst05.s: Delete.
* testsuite/gas/i860/ldst06.d: Delete.
* testsuite/gas/i860/ldst06.s: Delete.
* testsuite/gas/i860/pfam.d: Delete.
* testsuite/gas/i860/pfam.s: Delete.
* testsuite/gas/i860/pfmam.d: Delete.
* testsuite/gas/i860/pfmam.s: Delete.
* testsuite/gas/i860/pfmsm.d: Delete.
* testsuite/gas/i860/pfmsm.s: Delete.
* testsuite/gas/i860/pfsm.d: Delete.
* testsuite/gas/i860/pfsm.s: Delete.
* testsuite/gas/i860/pseudo-ops01.d: Delete.
* testsuite/gas/i860/pseudo-ops01.s: Delete.
* testsuite/gas/i860/regress01.d: Delete.
* testsuite/gas/i860/regress01.s: Delete.
* testsuite/gas/i860/shift.d: Delete.
* testsuite/gas/i860/shift.s: Delete.
* testsuite/gas/i860/simd.d: Delete.
* testsuite/gas/i860/simd.s: Delete.
* testsuite/gas/i860/system.d: Delete.
* testsuite/gas/i860/system.s: Delete.
* testsuite/gas/i860/xp.d: Delete.
* testsuite/gas/i860/xp.s: Delete.
* Makefile.am: Remove i860 and i960 support.
* configure.tgt: Likewise.
* doc/Makefile.am: Likewise.
* doc/all.texi: Likewise.
* testsuite/gas/all/gas.exp
* config/obj-coff.h: Remove i960 support.
* doc/internals.texi: Likewise.
* expr.c: Likewise.
* read.c: Likewise.
* write.c: Likewise.
* write.h: Likewise.
* testsuite/gas/lns/lns.exp: Likewise.
* testsuite/gas/symver/symver.exp: Likewise.
* config/tc-m68k.c: Remove BOUT support.
* config/tc-score.c: Likewise.
* config/tc-score7.c: Likewise.
* config/tc-sparc.c: Likewise.
* symbols.c: Likewise.
* doc/h8.texi: Likewise.
* configure.ac: Remove BOUT and i860 support.
* doc/as.texinfo: Remove BOUT, i860 and i960 support
* Makefile.in: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* emulparams/coff_i860.sh: Delete.
* emulparams/elf32_i860.sh: Delete.
* emulparams/elf32_i960.sh: Delete.
* emulparams/gld960.sh: Delete.
* emulparams/gld960coff.sh: Delete.
* emulparams/lnk960.sh: Delete.
* emultempl/gld960.em: Delete.
* emultempl/gld960c.em: Delete.
* emultempl/lnk960.em: Delete.
* scripttempl/i860coff.sc: Delete.
* scripttempl/i960.sc: Delete.
* ld.texinfo: Remove i960 support.
* Makefile.am: Remove i860 and i960 support.
* configure.tgt: Likewise.
* testsuite/ld-discard/extern.d: Likewise.
* testsuite/ld-discard/start.d: Likewise.
* testsuite/ld-discard/static.d: Likewise.
* testsuite/ld-elf/compressed1d.d: Likewise.
* testsuite/ld-elf/group1.d: Likewise.
* testsuite/ld-elf/group3b.d: Likewise.
* testsuite/ld-elf/group8a.d: Likewise.
* testsuite/ld-elf/group8b.d: Likewise.
* testsuite/ld-elf/group9a.d: Likewise.
* testsuite/ld-elf/group9b.d: Likewise.
* testsuite/ld-elf/linkonce2.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/merge2.d: Likewise.
* testsuite/ld-elf/merge3.d: Likewise.
* testsuite/ld-elf/orphan-10.d: Likewise.
* testsuite/ld-elf/orphan-11.d: Likewise.
* testsuite/ld-elf/orphan-12.d: Likewise.
* testsuite/ld-elf/orphan-9.d: Likewise.
* testsuite/ld-elf/orphan-region.d: Likewise.
* testsuite/ld-elf/orphan.d: Likewise.
* testsuite/ld-elf/orphan3.d: Likewise.
* testsuite/ld-elf/pr12851.d: Likewise.
* testsuite/ld-elf/pr12975.d: Likewise.
* testsuite/ld-elf/pr13177.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elf/pr17550a.d: Likewise.
* testsuite/ld-elf/pr17550b.d: Likewise.
* testsuite/ld-elf/pr17550c.d: Likewise.
* testsuite/ld-elf/pr17550d.d: Likewise.
* testsuite/ld-elf/pr17615.d: Likewise.
* testsuite/ld-elf/pr20528a.d: Likewise.
* testsuite/ld-elf/pr20528b.d: Likewise.
* testsuite/ld-elf/pr21562a.d: Likewise.
* testsuite/ld-elf/pr21562b.d: Likewise.
* testsuite/ld-elf/pr21562c.d: Likewise.
* testsuite/ld-elf/pr21562d.d: Likewise.
* testsuite/ld-elf/pr21562i.d: Likewise.
* testsuite/ld-elf/pr21562j.d: Likewise.
* testsuite/ld-elf/pr21562k.d: Likewise.
* testsuite/ld-elf/pr21562l.d: Likewise.
* testsuite/ld-elf/pr21562m.d: Likewise.
* testsuite/ld-elf/pr21562n.d: Likewise.
* testsuite/ld-elf/pr22677.d: Likewise.
* testsuite/ld-elf/pr22836-1a.d: Likewise.
* testsuite/ld-elf/pr22836-1b.d: Likewise.
* testsuite/ld-elf/pr349.d: Likewise.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-elf/warn1.d: Likewise.
* testsuite/ld-elf/warn2.d: Likewise.
* testsuite/ld-elf/warn3.d: Likewise.
* testsuite/lib/ld-lib.exp: Likewise.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
2018-04-11 21:49:30 +09:30
Maciej W. Rozycki
1e3f554897
MIPS/GAS: Correct `mips-*-windiss' target emulation configuration
...
Fix a commit 0a44bf6950
("mips-vxworks support"),
<https://sourceware.org/ml/binutils/2006-03/msg00179.html >, regression
and override the choice of the `vxworks' target environment introduced
with commit ea3eed1500
("Add generic vxworks GAS target."),
<https://sourceware.org/ml/binutils/2005-01/msg00052.html >, for
`mips-*-windiss' targets as they have not been converted to the VxWorks
target format introduced with the former commit, removing a GAS target
format selection failure:
Assembler messages:
Fatal error: selected target format 'elf32-bigmips-vxworks' unknown
on any assembly attempt with `mips-windiss' and equivalent target
configurations.
gas/
* configure.tgt: Use generic emulation for `mips-*-windiss',
overriding the blanket choice made for `*-*-windiss'.
2018-01-26 23:05:05 +00:00
Maciej W. Rozycki
c00f0d7a8a
MIPS/GAS: Correct `mips-*-sysv4*' target emulation configuration
...
Use `mips-*-sysv4*' rather than `mips-*-sysv4*MP*' to match the system
type for System V Release 4 MIPS targets, removing a GAS target
selection failure:
Assembler messages:
Fatal error: selected target format 'elf32-bigmips' unknown
on any assembly attempt with `mips-sysv4' and equivalent target
configurations. These would typically be called `mips-sni-sysv4'
(Sinix) vs `mips-dde-sysv4.2MP' (Supermax).
This corrects commit 8614eeee67
("Traditional MIPS patches"),
<https://sourceware.org/ml/binutils/2000-07/msg00018.html >, making GAS
target selection match commit dd745cfae5
("Traditional MIPS patches"),
<https://sourceware.org/ml/binutils/2000-07/msg00018.html >, and commit
3548145dcb
("Traditional MIPS patches"),
<https://sourceware.org/ml/binutils/2000-07/msg00018.html >, which added
support for these targets to BFD and LD respectively.
gas/
* configure.tgt: Use `mips-*-sysv4*' rather than
`mips-*-sysv4*MP*'.
2018-01-26 23:05:05 +00:00
Alan Modra
219d1afa89
Update year range in copyright notice of binutils files
2018-01-03 17:49:56 +10:30
Jiong Wang
3c0367d0e2
[AArch64, gas] Support ILP32 triplet aarch64*-linux-gnu_ilp32
...
This patch allows AArch64 GAS defaulting to ILP32 if it is configured with
aarch64*-linux-gnu_ilp32.
"md_after_parse_args" is implemented to update ABI into ILP32 if DEFAULT_ARCH is
"aarch64:32".
gas/
* configure.tgt: Set "arch" to "aarch64" if ${cpu} equals "aarch64".
Recognize the new triplet name aarch64*-linux-gnu_ilp32.
* configure.ac: Output DEFAULT_ARCH macro for AArch64.
* configure: Regenerate.
* config/tc-aarch64.h (aarch64_after_parse_args): New declaration.
(md_after_parse_args): New define.
* config/tc-aarch64.c (aarch64_abi_type): New enumeration
AARCH64_ABI_NONE.
(DEFAULT_ARCH): New define.
(aarch64_abi): Set default value to AARCH64_ABI_NONE.
(aarch64_after_parse_args): New function.
2017-05-22 13:27:11 +01:00
Andrew Jenner
2f5f29cada
IA16 support
...
* config.sub: Handle ia16 in $basic_machine.
bfd/
* config.bfd: Handle ia16.
gas/
* configure.tgt: Handle ia16.
ld/
* configure.tgt: Handle ia16.
2017-04-03 09:13:19 -07:00
Pip Cet
f96bd6c2d7
Add support for the WebAssembly file format and the wasm32 ELF conversion to gas and the binutils.
...
binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files.
(guess_is_rela): Likewise.
(dump_relocations): Likewise.
(is_32bit_abs_reloc): Likewise.
(is_none_reloc_): Likewise.
* NEWS: Mention the new support.
* testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32
as ELF target.
(supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE.
* testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations.
* testsuite/binutils-all/wasm32: New directory.
* testsuite/binutils-all/wasm32/create-wasm.d: New file.
* testsuite/binutils-all/wasm32/create-wasm.s: Likewise.
* testsuite/binutils-all/wasm32/custom-section.d: Likewise.
* testsuite/binutils-all/wasm32/custom-section.s: Likewise.
* testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise.
* testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise.
* testsuite/binutils-all/wasm32/long-sections.d: Likewise.
* testsuite/binutils-all/wasm32/long-sections.s: Likewise.
* testsuite/binutils-all/wasm32/parse-wasm.d: Likewise.
* testsuite/binutils-all/wasm32/parse-wasm.s: Likewise.
* testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise.
* testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise.
* testsuite/binutils-all/wasm32/prepared-section.d: Likewise.
* testsuite/binutils-all/wasm32/prepared-section.s: Likewise.
* testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests.
gas * config/tc-wasm32.h: New file: Add WebAssembly assembler target.
* config/tc-wasm32.c: New file: Add WebAssembly assembler target.
* Makefile.am: Add WebAssembly assembler target.
* configure.tgt: Add WebAssembly assembler target.
* doc/c-wasm32.texi: New file: Start documenting WebAssembly
assembler.
* doc/all.texi: Define WASM32.
* doc/as.texinfo: Add WebAssembly entries.
* NEWS: Mention the new support.
* Makefile.in: Regenerate.
* po/gas.pot: Regenerate.
* po/POTFILES.in: Regenerate.
* testsuite/gas/wasm32: New directory.
* testsuite/gas/wasm32/allinsn.d: New file.
* testsuite/gas/wasm32/allinsn.s: New file.
* testsuite/gas/wasm32/illegal.l: New file.
* testsuite/gas/wasm32/illegal.s: New file.
* testsuite/gas/wasm32/illegal-2.l: New file.
* testsuite/gas/wasm32/illegal-2.s: New file.
* testsuite/gas/wasm32/illegal-3.l: New file.
* testsuite/gas/wasm32/illegal-3.s: New file.
* testsuite/gas/wasm32/illegal-4.l: New file.
* testsuite/gas/wasm32/illegal-4.s: New file.
* testsuite/gas/wasm32/illegal-5.l: New file.
* testsuite/gas/wasm32/illegal-5.s: New file.
* testsuite/gas/wasm32/illegal-6.l: New file.
* testsuite/gas/wasm32/illegal-6.s: New file.
* testsuite/gas/wasm32/illegal-7.l: New file.
* testsuite/gas/wasm32/illegal-7.s: New file.
* testsuite/gas/wasm32/illegal-8.l: New file.
* testsuite/gas/wasm32/illegal-8.s: New file.
* testsuite/gas/wasm32/illegal-9.l: New file.
* testsuite/gas/wasm32/illegal-9.s: New file.
* testsuite/gas/wasm32/illegal-10.l: New file.
* testsuite/gas/wasm32/illegal-10.s: New file.
* testsuite/gas/wasm32/illegal-11.l: New file.
* testsuite/gas/wasm32/illegal-11.s: New file.
* testsuite/gas/wasm32/illegal-12.l: New file.
* testsuite/gas/wasm32/illegal-12.s: New file.
* testsuite/gas/wasm32/illegal-13.l: New file.
* testsuite/gas/wasm32/illegal-13.s: New file.
* testsuite/gas/wasm32/illegal-14.l: New file.
* testsuite/gas/wasm32/illegal-14.s: New file.
* testsuite/gas/wasm32/illegal-15.l: New file.
* testsuite/gas/wasm32/illegal-15.s: New file.
* testsuite/gas/wasm32/illegal-16.l: New file.
* testsuite/gas/wasm32/illegal-16.s: New file.
* testsuite/gas/wasm32/illegal-17.l: New file.
* testsuite/gas/wasm32/illegal-17.s: New file.
* testsuite/gas/wasm32/illegal-18.l: New file.
* testsuite/gas/wasm32/illegal-18.s: New file.
* testsuite/gas/wasm32/illegal-19.l: New file.
* testsuite/gas/wasm32/illegal-19.s: New file.
* testsuite/gas/wasm32/illegal-20.l: New file.
* testsuite/gas/wasm32/illegal-20.s: New file.
* testsuite/gas/wasm32/illegal-21.l: New file.
* testsuite/gas/wasm32/illegal-21.s: New file.
* testsuite/gas/wasm32/illegal-22.l: New file.
* testsuite/gas/wasm32/illegal-22.s: New file.
* testsuite/gas/wasm32/illegal-24.l: New file.
* testsuite/gas/wasm32/illegal-24.s: New file.
* testsuite/gas/wasm32/illegal-25.l: New file.
* testsuite/gas/wasm32/illegal-25.s: New file.
* testsuite/gas/wasm32/reloc.d: New file.
* testsuite/gas/wasm32/reloc.s: New file.
* testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly
architecture.
opcodes * configure.ac: Add (empty) bfd_wasm32_arch target.
* configure: Regenerate
* po/opcodes.pot: Regenerate.
include * opcode/wasm.h: New file to support wasm32 architecture.
* elf/wasm32.h: Add R_WASM32_32 relocation.
bfd * elf32-wasm32.c: Add relocation code, two relocs.
* reloc.c: Add wasm32 relocations.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
* bfd/po/bfd.pot: Regenerate.
2017-03-30 10:57:21 +01:00
Sebastian Huber
de514cf3db
gas: Default to ELF for RTEMS targets
...
* configure.tgt (aarch64*-*-rtems*): Remove.
(bfin-*-rtems*): Likewise.
(h8300-*-rtems*): Likewise.
(i386-*-rtems*): Likewise.
(m32c-*-rtems*): Likewise.
(m32r-*-rtems*): Likewise.
(m68k-*-rtems*): Likewise.
(mips-*-rtems*): Likewise.
(nios2-*-rtems*): Likewise.
(ppc-*-rtems*): Likewise.
(sh-*-rtems*): Likewise.
(sparc64-*-rtems*): Likewise.
(sparc-*-rtems*): Likewise.
(*-*-rtems*) Use ELF format.
2017-01-25 17:54:47 +10:30
Sebastian Huber
3e97ba8a52
gas: Use ARM EABI for RTEMS
...
* configure.tgt (arm-*-rtems*): Move to (arm-*-eabi*).
2017-01-25 17:53:44 +10:30
Sebastian Huber
850d84f6a4
Remove all RTEMS COFF targets
...
bfd/
* config.bfd (*-*-rtemscoff*): Mark as removed.
gas/
* configure.tgt (sh-*-rtemscoff*): Remove.
ld/
* configure.tgt (h8300-*-rtemscoff*): Remove.
(i960-*-rtems*): Likewise.
(m68*-*-rtemscoff*): Likewise.
(sh-*-rtemscoff*): Likewise.
2017-01-25 17:52:27 +10:30
Sebastian Huber
666c6aff6b
RISC-V gas: Remove em=linux from configure.tgt
...
The use of te-linux.h is unnecessary since the TE_LINUX define is unused
and LOCAL_LABELS_FB is defined to 1 in tc-riscv.h as well.
gas/
* configure.tgt (riscv*-*-*): Remove em=linux.
2017-01-24 10:38:42 -08:00
Jeremy Soller
f2e2d2f54b
Add support for x86/64 redox target.
...
bfd * config.bfd: Add entries for i686-redox and x86_64-redox.
gas * configure.tgt: Add entry for i386-redox.
ld * configure.tgt: Add entries for x86-redox and x86_64-redox.
2017-01-11 15:05:53 +00:00
Norm Jacobs
10ab38d930
When configuring GAS treat as sparcv9 target the same way as a sparc64 target.
...
PR gas/20992
* configure.tgt: Treat sparcv9 as sparc64.
2017-01-04 11:49:00 +00:00
Alan Modra
2571583aed
Update year range in copyright notice of all files.
2017-01-02 14:08:56 +10:30
Dimitar Dimitrov
93f11b16ec
PRU GAS Port
...
* NEWS: Mention new PRU target.
* Makefile.am: Add PRU target.
* config/obj-elf.c: Ditto.
* configure.tgt: Ditto.
* config/tc-pru.c: New file.
* config/tc-pru.h: New file.
* doc/Makefile.am: Add documentation for PRU GAS port.
* doc/all.texi, Ditto.
* doc/as.texinfo: Ditto.
* doc/c-pru.texi: Document PRU GAS options.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
* testsuite/gas/pru/alu.d: New file for PRU GAS testsuite.
* testsuite/gas/pru/alu.s: Ditto.
* testsuite/gas/pru/branch.d: Ditto.
* testsuite/gas/pru/branch.s: Ditto.
* testsuite/gas/pru/illegal.l: Ditto.
* testsuite/gas/pru/illegal.s: Ditto.
* testsuite/gas/pru/ldi.d: Ditto.
* testsuite/gas/pru/ldi.s: Ditto.
* testsuite/gas/pru/ldst.d: Ditto.
* testsuite/gas/pru/ldst.s: Ditto.
* testsuite/gas/pru/loop.d: Ditto.
* testsuite/gas/pru/loop.s: Ditto.
* testsuite/gas/pru/misc.d: Ditto.
* testsuite/gas/pru/misc.s: Ditto.
* testsuite/gas/pru/pru.exp: Ditto.
* testsuite/gas/pru/pseudo.d: Ditto.
* testsuite/gas/pru/pseudo.s: Ditto.
* testsuite/gas/pru/warn_reglabel.l: Ditto.
* testsuite/gas/pru/warn_reglabel.s: Ditto.
* testsuite/gas/pru/xfr.d: Ditto.
* testsuite/gas/pru/xfr.s: Ditto.
* testsuite/gas/lns/lns.exp: Mark lns-common-1-alt variant for PRU.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2016-12-31 12:03:35 +10:30
Josh Conner
d5451cd453
Add support for Fushia OS.
...
* configure.ac: Add fuchsia to targets that use ELF.
* configure: Regenerated.
bfd * configure.tgt: Add support for fuchsia (OS).
gas * configure.tgt: Add support for fuchsia (OS).
ld * Makefile.am: Add dependency information for earmelf_fuchsia.c.
* Makefile.in: Regenerate.
* configure.tgt: Add support for aarch64-*-fuchsia, arm*-*-fuchsia*, and
x86_64-*-fuchsia* targets.
* emulparams/armelf_fuchsia.sh: New file.
* emulparams/armelfb_fuchsia.sh: New file.
2016-12-02 10:44:29 +00:00
Nick Clifton
e23eba971d
Add support for RISC-V architecture.
...
bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf.
* config.bdf: Likewise.
* configure.ac: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* archures.c: Add bfd_riscv_arch.
* reloc.c: Add riscv relocs.
* targets.c: Add riscv_elf32_vec and riscv_elf64_vec.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id.
* elfnn-riscv.c: New file.
* elfxx-riscv.c: New file.
* elfxx-riscv.h: New file.
binutils* readelf.c (guess_is_rela): Add EM_RISCV.
(get_machine_name): Likewise.
(dump_relocations): Add support for riscv relocations.
(get_machine_flags): Add support for riscv flags.
(is_32bit_abs_reloc): Add R_RISCV_32.
(is_64bit_abs_reloc): Add R_RISCV_64.
(is_none_reloc): Add R_RISCV_NONE.
* testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv.
Expect the debug_ranges test to fail.
gas * Makefile.am: Add riscv files.
* Makefile.in: Regenerate.
* NEWS: Mention the support for this architecture.
* configure.in: Define a default architecture.
* configure: Regenerate.
* configure.tgt: Add entries for riscv.
* doc/as.texinfo: Likewise.
* testsuite/gas/all/gas.exp: Expect the redef tests to fail.
* testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail.
* config/tc-riscv.c: New file.
* config/tc-riscv.h: New file.
* doc/c-riscv.texi: New file.
* testsuite/gas/riscv: New directory.
* testsuite/gas/riscv/riscv.exp: New file.
* testsuite/gas/riscv/t_insns.d: New file.
* testsuite/gas/riscv/t_insns.s: New file.
ld * Makefile.am: Add riscv files.
* Makefile.in: Regenerate.
* NEWS: Mention the support for this target.
* configure.tgt: Add riscv entries.
* emulparams/elf32lriscv-defs.sh: New file.
* emulparams/elf32lriscv.sh: New file.
* emulparams/elf64lriscv-defs.sh: New file.
* emulparams/elf64lriscv.sh: New file.
* emultempl/riscvelf.em: New file.
opcodes * configure.ac: Add entry for bfd_riscv_arch.
* configure: Regenerate.
* disassemble.c (disassembler): Add support for riscv.
(disassembler_usage): Likewise.
* riscv-dis.c: New file.
* riscv-opc.c: New file.
include * dis-asm.h: Add prototypes for print_insn_riscv and
print_riscv_disassembler_options.
* elf/riscv.h: New file.
* opcode/riscv-opc.h: New file.
* opcode/riscv.h: New file.
2016-11-01 16:45:57 +00:00
H.J. Lu
4e3e1fdf32
Default to --enable-compressed-debug-sections=gas for Linux/x86
...
--enable-compressed-debug-sections=gas added to binutils 2.26. Make it
default for Linux/x86 targets in 2.27.
* NEWS: Mention --enable-compressed-debug-sections=gas is the
default for Linux/x86 targets.
* configure.tgt (ac_default_compressed_debug_sections): Default
to yes for Linux/x86 targets.
2016-06-29 09:32:34 -07:00
Alan Modra
5c0ff16372
alpha-openbsd build failure
...
This target doesn't build, due to a missing gas/config/te-obsd.h file.
It's been that way since the commit switching to elf, in 2002.
https://lists.gnu.org/archive/html/bug-gnu-utils/2002-07/msg00128.html
* configure.tgt (alpha-*-openbsd*): Use em=nbsd.
2016-06-24 23:05:48 +09:30
Vineet Gupta
4ad0bb5f3a
Allow ARC Linux targets that do not use uclibc.
...
bfd * config.bfd: Replace -uclibc with *.
gas * configure.tgt: Replace -uclibc with *.
ld * configure.tgt: Replace -uclibc with *.
2016-06-02 15:03:47 +01:00
Kuba Sejdak
a2bea3245e
Add support for configuring for the ARM Phoenix target.
...
bfd * config.bfd: Add entry for arm-phoenix.
gas * configuse.tgt: Add entry for arm-phoenix.
ld * Makefile.am: Add earmelf_phoenix.c.
* Makefile.in: Regenerate.
* configure.tgt: Add entry for arm-phoenix.
* emulparams/armelf_phoenix.sh: New file.
2016-05-23 13:53:07 +01:00
Joel Sherrill
12a132db16
Add aarch64-*-rtems* target
2016-02-26 14:07:27 -06:00
Alan Modra
6f2750feaf
Copyright update for binutils
2016-01-01 23:00:01 +10:30
Nick Clifton
886a250647
New ARC implementation.
...
bfd * archures.c: Remove support for older ARC. Added support for new
ARC cpus (ARC600, ARC601, ARC700, ARCV2).
* bfd-in2.h: Likewise.
* config.bfd: Likewise.
* cpu-arc.c: Likewise.
* elf32-arc.c: Totally changed file with a refactored
inplementation of the ARC port.
* libbfd.h: Added ARC specific relocation types.
* reloc.c: Likewise.
gas * config/tc-arc.c: Revamped file for ARC support.
* config/tc-arc.h: Likewise.
* doc/as.texinfo: Add new ARC options.
* doc/c-arc.texi: Likewise.
ld * configure.tgt: Added target arc-*-elf* and arc*-*-linux-uclibc*.
* emulparams/arcebelf_prof.sh: New file
* emulparams/arcebelf.sh: Likewise.
* emulparams/arceblinux_prof.sh: Likewise.
* emulparams/arceblinux.sh: Likewise.
* emulparams/arcelf_prof.sh: Likewise.
* emulparams/arcelf.sh: Likewise.
* emulparams/arclinux_prof.sh: Likewise.
* emulparams/arclinux.sh: Likewise.
* emulparams/arcv2elfx.sh: Likewise.
* emulparams/arcv2elf.sh: Likewise.
* emultempl/arclinux.em: Likewise.
* scripttempl/arclinux.sc: Likewise.
* scripttempl/elfarc.sc: Likewise.
* scripttempl/elfarcv2.sc: Likewise
* Makefile.am: Add new ARC emulations.
* Makefile.in: Regenerate.
* NEWS: Mention the new feature.
opcodes * arc-dis.c: Revamped file for ARC support
* arc-dis.h: Likewise.
* arc-ext.c: Likewise.
* arc-ext.h: Likewise.
* arc-opc.c: Likewise.
* arc-fxi.h: New file.
* arc-regs.h: Likewise.
* arc-tbl.h: Likewise.
binutils * readelf.c (get_machine_name): Remove A5 reference. Add ARCompact
and ARCv2.
(get_machine_flags): Handle EM_ARCV2 and EM_ARCOMPACT.
(guess_is_rela): Likewise.
(dump_relocations): Likewise.
(is_32bit_abs_reloc): Likewise.
(is_16bit_abs_reloc): Likewise.
(is_none_reloc): Likewise.
* NEWS: Mention the new feature.
include * dis-asm.h (arc_get_disassembler): Correct declaration.
* arc-reloc.def: Macro file with definition of all relocation
types.
* arc.h: Changed macros for the newly supported ARC cpus. Altered
enum defining the supported relocations.
* common.h: Changed EM_ARC_A5 definition to EM_ARC_COMPACT. Added
macro for EM_ARC_COMPACT2.
* arc-func.h: New file.
* arc.h: Likewise.
2015-10-07 14:20:19 +01:00
H.J. Lu
3739860c11
Remove trailing spaces in gas
2015-08-12 04:40:42 -07:00
H.J. Lu
5197d47436
Default e_machine to EM_IAMCU for i?86-*-elfiamcu
...
This patch sets the default ELF output format of assembler and linker to
EM_IAMCU when binutils is configured to i?86-*-elfiamcu target.
gas/
* configure.tgt (arch): Set to iamcu for i386-*-elfiamcu target.
* config/tc-i386.c (i386_mach): Support iamcu.
(i386_target_format): Likewise.
ld/
* configure.tgt: Support i[3-7]86-*-elfiamcu target.
ld/testsuite/
* ld-i386/i386.exp (iamcu_tests): Run iamcu-4.
* ld-i386/iamcu-4.d: New file.
2015-05-11 12:06:33 -07:00
H.J. Lu
b633b7258d
Support ix86-*-elf*
...
bfd/
* config.bfd: Support i[3-7]86-*-elf*.
gas/
* configure.tgt: Support i386-*-elf*.
2015-05-01 05:02:30 -07:00
Ed Schouten
6036f48621
Add support for Nuxi CloudABI on x86-64
...
bfd/
* config.bfd (targ_defvec): Set to x86_64_elf64_cloudabi_vec
for x86_64-*-cloudabi*.
* configure.ac: Handle x86_64_elf64_cloudabi_vec.
* configure: Regenerated.
* elf64-x86-64.c (TARGET_LITTLE_SYM): Support x86_64-*-cloudabi*.
(TARGET_LITTLE_NAME): Likewise.
(ELF_OSABI): Likewise.
(elf64_bed): Likewise.
* targets.c (x86_64_elf64_cloudabi_vec): New.
(_bfd_target_vector): Add x86_64_elf64_cloudabi_vec.
gas/
* configure.tgt (fmt): Set to elf for *-*-cloudabi*.
ld/
* Makefile.am (ALL_64_EMULATION_SOURCES): Add
eelf_x86_64_cloudabi.c.
(eelf_x86_64_cloudabi.c): New.
* configure.tgt (targ_emul): Set to elf_x86_64_cloudabi for
x86_64-*-cloudabi*.
* Makefile.in: Regenerated.
* emulparams/elf_x86_64_cloudabi.sh: New file.
2015-03-31 08:11:08 -07:00
Yoshinori Sato
5518c738a4
Add support for the h8300-linux target.
...
ld * Makefile.am: (ALL_EMULATION_SOURCES): Add new emulations.
* Makefile.in: Regenerate.
* configure.tgt: Add h8300-*-linux
* emulparams/h8300elf_linux.sh: Add new emulation.
* emulparams/h8300helf_linux.sh: Likewise.
* emulparams/h8300self_linux.sh: Likewise.
* emulparams/h8300sxelf_linux.sh: Likewise.
bfd * config.bfd: Add h8300-*-linux.
* configure.ac: Add h8300_elf32_linux_vec.
* configure: Regenerate.
* elf32-h8300.c: Likewise.
* targets.c(_bfd_target_vector): Likewise.
gas * config/tc-h8300.c (line_separater_chars): Add a version for
h8300-linux that includes a separator.
(default_mach): New variable.
(md_main): Use it.
(md_longopts): Add '--march' option.
(md_parse_option): Parse the new option.
* config/tc-h8300.h (TARGET_FORMAT): Add elf32-h8300-linux.
* configure.tgt: Add h8300-*-linux
* doc/c-h8300.texi: Document --march.
2015-02-23 17:04:53 +00:00
Alan Modra
3f8107ab38
FT32 initial support
...
FT32 is a new 32-bit RISC core developed by FTDI for embedded applications.
* configure.ac: Add FT32 support.
* configure: Regenerate.
bfd/
* Makefile.am: Add FT32 files.
* archures.c (enum bfd_architecture): Add bfd_arch_ft32.
(bfd_mach_ft32): Define.
(bfd_ft32_arch): Declare.
(bfd_archures_list): Add bfd_ft32_arch.
* config.bfd: Handle FT32.
* configure.ac: Likewise.
* cpu-ft32.c: New file.
* elf32-ft32.c: New file.
* reloc.c (BFD_RELOC_FT32_10, BFD_RELOC_FT32_20, BFD_RELOC_FT32_17,
BFD_RELOC_FT32_18): Define.
* targets.c (_bfd_target_vector): Add ft32_elf32_vec.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
binutils/
* readelf.c: Add FT32 support.
gas/
* Makefile.am: Add FT32 files.
* config/tc-ft32.c: New file.
* config/tc-ft32.h: New file.
* configure.tgt: Add FT32 support.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
gas/testsuite/
* gas/ft32/ft32.exp: New file.
* gas/ft32/insn.d: New file.
* gas/ft32/insn.s: New file.
include/
* dis-asm.h (print_insn_ft32): Declare.
include/elf/
* common.h (EM_FT32): Define.
* ft32.h: New file.
include/opcode/
* ft32.h: New file.
ld/
* Makefile.am: Add FT32 files.
* configure.tgt: Handle FT32 target.
* emulparams/elf32ft32.sh: New file.
* scripttempl/ft32.sc: New file.
* Makefile.in: Regenerate.
opcodes/
* Makefile.am: Add FT32 files.
* configure.ac: Handle FT32.
* disassemble.c (disassembler): Call print_insn_ft32.
* ft32-dis.c: New file.
* ft32-opc.c: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
2015-01-28 16:25:18 +10:30
Alan Modra
b90efa5b79
ChangeLog rotatation and copyright year update
2015-01-02 00:53:45 +10:30
Alan Modra
c322dea402
PowerPC register numbers in DWARF
...
This makes gas .cfi output to .debug_frame match register numbering
emitted by gcc. md_reg_eh_frame_to_debug_frame follows the ABI,
targets not using it, notably Linux, don't.
* config/tc-ppc.h (md_reg_eh_frame_to_debug_frame): Match current
gcc behaviour.
* config/te-aix.h: New file.
* configure.tgt: Use em=aix for powerpc-aix.
2014-12-13 00:11:36 +10:30
Eric Botcazou
b6605dddac
Add Visium support to gas
...
gas/
* configure.tgt: Add Visium support.
* Makefile.am (TARGET_CPU_CFILES): Move config/tc-vax.c around
and add config/tc-visium.c.
(TARGET_CPU_HFILES): Move config/tc-vax.h around and add
config/tc-visium.h.
* Makefile.in: Regenerate.
* config/tc-visium.c: New file.
* config/tc-visium.h: Likewise.
* po/POTFILES.in: Regenerate.
gas/testsuite/
* gas/elf/elf.exp: Skip ifunc-1 for Visium.
* gas/visium/: New directory.
2014-12-06 16:42:26 +01:00
Andrew Bennett
a9d58c068c
Add mips*-img-elf* target triple.
...
/
* configure.ac: Add mips*-img-elf* target triple.
* configure: Regenerate.
bfd/
* config.bfd: Add mips*-img-elf* target triple.
gas/
* configure.tgt: Add mips*-img-elf* target triple.
gas/testsuite/
* gas/mips/mips.exp: Add mips*-img-elf* target triple.
binutils/testsuite/
* binutils-all/objcopy.exp: Add mips*-img-elf* target triple.
* binutils-all/readelf.exp: Likewise.
ld/
* configure.tgt: Add mips*-img-elf* target triple.
ld/testsuite/
* ld-mips-elf/mips-elf.exp: Add support for mips*-img-elf* target
triple.
2014-09-12 14:25:15 +01:00
Nick Clifton
f7f2534e71
This patch adds support for FreeBSD ARM in gas.
...
Before FreeBSD-8 there was/is no arm support from the OS side.
FreeBSD-9.x added ARM support but only for the OABI.
From FreeBSD-10 upwards there is EABI support.
* Makefile.am: Add FreeBSD ARM support.
* Mafefile.in: Regenerate.
* configure.tgt: Add FreeBSD ARM support.
* config/te-armfbsdeabi.h: New file.
* config/te-armfbsdvfp.h: Likewise.
2014-08-19 15:51:43 +01:00
Joel Sherrill
8a196b99a8
or1k: RTEMS target support and simplify matching
...
* gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
(or1k*-*-*): Use or1k* to match or1knd and or1kZ.
Signed-off-by: Christian Svensson <blue@cmd.nu>
2014-07-27 18:43:33 +02:00
Anthony Green
48494700d5
Add moxiebox target
2014-07-27 08:51:20 -04:00
Joel Sherrill
3d52a869b2
Add or reactivate or1k-*-rtems*
...
* bfd/config.bfd (or1k-*-rtems*): Reactivate.
* gas/configure.tgt (or1k-*-rtems*): Add.
Signed-off-by: Christian Svensson <blue@cmd.nu>
2014-07-22 01:15:41 +02:00
Christian Svensson
73589c9dbd
Remove support for the (deprecated) openrisc and or32 configurations and replace
...
with support for the new or1k configuration.
2014-04-22 15:57:47 +01:00
Alan Modra
4b95cf5c0c
Update copyright years
2014-03-05 22:16:15 +10:30
Kuan-Lin Chen
35c081572f
Add support for Andes NDS32:
...
BFD:
* Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Add nds32
files.
* Makefile.in: Regenerate.
* archures.c (bfd_nds32_arch): Add nds32 target.
* bfd-in2.h: Regenerate.
* config.bfd (nds32*le-*-linux): Add bfd_elf32_nds32lelin_vec
and bfd_elf32_nds32belin_vec.
(nds32*be-*-linux*): Likewise.
(nds32*le-*-*): Add bfd_elf32_nds32le_vec and bfd_elf32_nds32be_vec.
(nds32*be-*-*): Likewise.
* configure.in (bfd_elf32_nds32be_vec): Add elf32-nds32.lo.
(bfd_elf32_nds32le_vec): Likewise.
(bfd_elf32_nds32belin_vec): Likewise.
(bfd_elf32_nds32lelin_vec): Likewise.
* configure: Regenerate.
* cpu-nds32.c: New file for nds32.
* elf-bfd.h: Add NDS32_ELF_DATA.
* elf32-nds32.c: New file for nds32.
* elf32-nds32.h: New file for nds32.
* libbfd.h: Regenerate.
* reloc.c: Add relocations for nds32.
* targets.c (bfd_elf32_nds32be_vec): New declaration for nds32.
(bfd_elf32_nds32le_vec): Likewise.
(bfd_elf32_nds32belin_vec): Likewise.
(bfd_elf32_nds32lelin_vec): Likewise.
BINUTILS:
* readelf.c: Include elf/nds32.h
(guess_is_rela): Add case for EM_NDS32.
(dump_relocations): Add case for EM_NDS32.
(decode_NDS32_machine_flags): New.
(get_machine_flags): Add case for EM_NDS32.
(is_32bit_abs_reloc): Likewise.
(is_16bit_abs_reloc): Likewise.
(process_nds32_specific): New.
(process_arch_specific): Add case for EM_NDS32.
* NEWS: Announce Andes nds32 support.
* MAINTAINERS: Add nds32 maintainers.
TESTSUITE:
* binutils-all/objdump.exp: Add NDS32 cpu.
* binutils-all/readelf.r: Skip extra reloc created by NDS32.
GAS:
* Makefile.am (TARGET_CPU_CFILES): Add config/tc-nds32.c.
(TARGET_CPU_HFILES): Add config/tc-nds32.h.
* Makefile.in: Regenerate.
* configure.in (nds32): Add nds32 target extension config support.
* configure.tgt : Add case for nds32-*-elf* and nds32-*-linux*.
* configure: Regenerate.
* config/tc-nds32.c: New file for nds32.
* config/tc-nds32.h: New file for nds32.
* doc/Makefile.am (CPU_DOCS): Add c-nds32.texi.
* doc/Makefile.in: Regenerate.
* doc/as.texinfo: Add nds32 options.
* doc/all.texi: Set NDS32.
* doc/c-nds32.texi: New file dor nds32 document.
* NEWS: Announce Andes nds32 support.
TESTSUITE:
* gas/all/gas.exp: Add expected failures for NDS32.
* gas/elf/elf.exp: Likewise.
* gas/lns/lns.exp: Use alternate test.
* gas/macros/irp.d: Skip for NDS32.
* gas/macros/macros.exp: Skip some tests for the NDS32.
* gas/macros/rept.d: Skip for NDS32.
* gas/macros/test3.d: Skip for NDS32.
* gas/nds32: New directory.
* gas/nds32/alu-1.s: New test.
* gas/nds32/alu-1.d: Likewise.
* gas/nds32/alu-2.s: Likewise.
* gas/nds32/alu-2.d: Likewise.
* gas/nds32/br-1.d: Likewise.
* gas/nds32/br-1.s: Likewise.
* gas/nds32/br-2.d: Likewise.
* gas/nds32/br-2.s: Likewise.
* gas/nds32/ji-jr.d: Likewise.
* gas/nds32/ji-jr.s: Likewise.
* gas/nds32/ls.d: Likewise.
* gas/nds32/ls.s: Likewise.
* gas/nds32/lsi.d: Likewise.
* gas/nds32/lsi.s: Likewise.
* gas/nds32/to-16bit-v1.d: Likewise.
* gas/nds32/to-16bit-v1.s: Likewise.
* gas/nds32/to-16bit-v2.d: Likewise.
* gas/nds32/to-16bit-v2.s: Likewise.
* gas/nds32/to-16bit-v3.d: Likewise.
* gas/nds32/to-16bit-v3.s: Likewise.
* gas/nds32/nds32.exp: New test driver.
LD:
* Makefile.am (ALL_EMULATION_SOURCES): Add nds32 target.
* Makefile.in: Regenerate.
* configure.tgt: Add case for nds32*le-*-elf*, nds32*be-*-elf*,
nds32*le-*-linux-gnu*, and nds32*be-*-linux-gnu*.
* emulparams/nds32belf.sh: New file for nds32.
* emulparams/nds32belf_linux.sh: Likewise.
* emulparams/nds32belf16m.sh: Likewise.
* emulparams/nds32elf.sh: Likewise.
* emulparams/nds32elf_linux.sh: Likewise.
* emulparams/nds32elf16m.sh: Likewise.
* emultempl/nds32elf.em: Likewise.
* scripttempl/nds32elf.sc}: Likewise.
* gen-doc.texi: Set NDS32.
* ld.texinfo: Set NDS32.
* NEWS: Announce Andes nds32 support.
TESTSUITE:
* lib/ld-lib.exp: Add NDS32 to list of targets that do not support
shared library generation.
* ld-nds32: New directory.
* ld-nds32/branch.d: New test.
* ld-nds32/branch.ld: New test.
* ld-nds32/branch.s: New test.
* ld-nds32/diff.d: New test.
* ld-nds32/diff.ld: New test.
* ld-nds32/diff.s: New test.
* ld-nds32/gp.d: New test.
* ld-nds32/gp.ld: New test.
* ld-nds32/gp.s: New test.
* ld-nds32/imm.d: New test.
* ld-nds32/imm.ld: New test.
* ld-nds32/imm.s: New test.
* ld-nds32/imm_symbol.s: New test.
* ld-nds32/relax_jmp.d: New test.
* ld-nds32/relax_jmp.ld: New test.
* ld-nds32/relax_jmp.s: New test.
* ld-nds32/relax_load_store.d: New test.
* ld-nds32/relax_load_store.ld: New test.
* ld-nds32/relax_load_store.s: New test.
* ld-nds32/nds32.exp: New file.
OPCODES:
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add nds32-asm.c
and nds32-dis.c.
* Makefile.in: Regenerate.
* configure.in: Add case for bfd_nds32_arch.
* configure: Regenerate.
* disassemble.c (ARCH_nds32): Define.
* nds32-asm.c: New file for nds32.
* nds32-asm.h: New file for nds32.
* nds32-dis.c: New file for nds32.
* nds32-opc.h: New file for nds32.
INCLUDE:
* dis-asm.h (print_insn_nds32): Add nds32 target.
* elf/nds32.h: New file for nds32.
* opcode/nds32.h: New file for nds32.
2013-12-13 11:52:32 +00:00
Richard Sandiford
e8044f355d
* configure.ac (mips*-*-bsd*, mips*-*-ultrix*, mips*-*-osf*)
...
(mips*-*-ecoff*, mips*-*-pe*, mips*-*-irix* [v4 and earlier])
(mips*-*-lnews*, mips*-*-riscos*): Add gas and ld to noconfigdirs.
* configure: Regenerate.
gas/
* NEWS: Note removal of ECOFF support.
* doc/as.texinfo (--emulation): Update for the removal of MIPS ECOFF.
* Makefile.am (TARG_ENV_HFILES): Remove config/te-lnews.h.
(MULTI_CFILES): Remove config/e-mipsecoff.c.
* Makefile.in: Regenerate.
* configure.in: Remove MIPS ECOFF references.
(mips-sony-bsd*, mips-*-bsd*, mips-*-lnews*-ecoff, mips-*-*-ecoff):
Delete cases.
(mips-*-irix5*-*, mips*-*-linux*-*, mips*-*-freebsd*)
(mips*-*-kfreebsd*-gnu, mips-*-*-elf): Fold into...
(mips-*-*): ...this single case.
(mipsbecoff, mipslecoff, mipsecoff): Remove emulations. Expect
MIPS emulations to be e-mipself*.
* configure: Regenerate.
* configure.tgt (mips-sony-bsd*, mips-*-ultrix*, mips-*-osf*)
(mips-*-ecoff*, mips-*-pe*, mips-*-irix*, ips-*-lnews*, mips-*-riscos*)
(mips-*-sysv*): Remove coff and ecoff cases.
* as.c (mipsbecoff, mipslecoff, mipsecoff): Remove.
* ecoff.c: Remove reference to MIPS ECOFF.
* config/e-mipsecoff.c, config/te-lnews.h: Delete files.
* config/tc-mips.c (ECOFF_LITTLE_FORMAT): Delete.
(RDATA_SECTION_NAME, mips_target_form): Remove COFF and ECOFF cases.
(mips_hi_fixup): Tweak comment.
(append_insn): Require a howto.
(mips_after_parse_args): Remove OBJ_MAYBE_ECOFF code.
gas/testsuite/
* gas/all/gas.exp: Remove reference to mips-ecoff.
* gas/mips/branch-misc-1.d, gas/mips/branch-misc-2.d,
gas/mips/branch-misc-2-64.d, gas/mips/branch-misc-2pic.d,
gas/mips/branch-misc-2pic-64.d, gas/mips/branch-swap.d: Remove
skips for mips-*-ecoff.
ld/
* NEWS: Document the removal of MIPS ECOFF targets.
* ld.texinfo (--gpsize=@var{value}): Use MIPS ELF rather than
MIPS ECOFF as an example of a target that supports small data.
* ldmain.c (g_switch_value): Likewise.
* configure.tgt (mips*-*-pe, mips*-dec-ultrix*, mips*-dec-osf*)
(mips*-sgi-irix* [v4 and earlier], mips*el-*-ecoff*, mips*-*-ecoff*)
(mips*-*-bsd*, mips*-*-lnews*): Remove cases.
* Makefile.am (ALL_EMULATION_SOURCES): Remove emipsbig.c, emipsbsd.c,
emipsidt.c, emipsidtl.c, emipslit.c, emipslnews.c and emipspe.c.
(emipsbig.c, emipsbsd.c, emipsidt.c, emipsidtl.c, emipslit.c)
(emipslnews.c, emipspe.c): Delete rules.
* Makefile.in: Regenerate.
* emulparams/mipsbig.sh, emulparams/mipsbsd.sh, emulparams/mipsidt.sh,
emulparams/mipsidtl.sh, emulparams/mipslit.sh, emulparams/mipslnews.sh,
emulparams/mipspe.sh, emultempl/mipsecoff.em: Delete.
* emultempl/m68kcoff.em: Update comment to say that MIPS ECOFF support
has now been removed.
* emultempl/pe.em: Remove TARGET_IS_mipspe checks.
2013-06-22 16:44:16 +00:00
Maciej W. Rozycki
df26367c79
bfd/
...
* config.bfd: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Also exclude
*-*-linux*ecoff*.
gas/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
ld/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*. Update the `sed' pattern used to convert
from alpha*-*-linux-* to alpha*-*-linux*ecoff*.
2013-05-01 17:27:46 +00:00