2003-09-30 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_ip): Capitalize first word of
existing condition code warning, and add condition code
warnings for .ps instructions, and for bc1any[24][tf].
[ gas/testsuite/ChangeLog ]
2003-09-30 Chris Demetriou <cgd@broadcom.com>
* lib/gas-defs.exp (run_dump_test): If stderr file is specified
and there was no stderr output, compare anyway (i.e., cause a
test failure).
* gas/mips/mips64-mips3d.s: Add some new instructions to test warnings.
* gas/mips/mips64-mips3d.l: New file.
* gas/mips/mips64-mips3d.d: Use mips64-mips3d.l, and update for
changes to mips64-mips3d.s.
* gas/mips/mips64-mips3d-incl.d: Likewise.
* gas/mips/set-arch.l: New file.
* gas/mips/set-arch.d: Specify set-arch.l as stderr output to check.
* gas/mips/mips5.l: Make error messages match source.
2003-09-30 Chris Demetriou <cgd@broadcom.com>
* NEWS: Add an indication of the cutoff for 2.14.
[ gas/ChangeLog ]
2003-09-30 Chris Demetriou <cgd@broadcom.com>
* NEWS: Add an indication of the cutoff for 2.14.
[ ld/ChangeLog ]
2003-09-30 Chris Demetriou <cgd@broadcom.com>
* NEWS: Add an indication of the cutoff for 2.14.
literal_syms): New global variables.
(xtensa_define_label, add_target_symbol, xtensa_find_label,
map_over_defined_symbols, is_loop_target_label,
xtensa_mark_target_fragments, xtensa_move_frag_symbol,
xtensa_move_frag_symbols, defined_symbols, branch_targets): Delete.
(xtensa_begin_directive): Call md_flush_pending_output. Move symbols
from insn_labels to saved_insn_labels when entering a literal region.
(xtensa_end_directive): Call md_flush_pending_output. Restore
insn_labels list when leaving a literal region.
(xtensa_literal_position): Call xtensa_clear_insn_labels.
(xtensa_literal_pseudo): Add check to disallow .literal inside a
literal region. Move insn_labels to saved_insn_labels and then restore
insn_labels on exit.
(xg_add_branch_and_loop_targets): Replace add_target_symbol calls with
code to set is_loop_target or is_branch_target flag on the symbol
(xtensa_create_literal_symbol): Call xtensa_add_literal_sym.
(xtensa_add_literal_sym, xtensa_add_insn_label,
xtensa_clear_insn_labels): New functions.
(xtensa_move_labels): Remove old_frag and old_offset arguments. Add
loops_ok argument. Rewrite to use insn_labels list instead of
calling xtensa_find_label and to check the is_loop_target flag on
symbols when loops_ok is false.
(xtensa_frob_label): Remove call to xtensa_define_label. Add call
to either xtensa_add_literal_sym or xtensa_add_insn_label. Adjust
call to xtensa_move_labels. Propagate is_branch_target and
is_loop_target flags from symbols to frags.
(xtensa_flush_pending_output): Call xtensa_clear_insn_labels.
(md_assemble): Use xtensa_move_labels with loops_ok = FALSE when
aligning a loop instruction. Adjust call to xtensa_move_labels for
aligning entry instructions. Add call to xtensa_clear_insn_labels.
(xtensa_end): Remove call to xtensa_mark_target_fragments.
(xtensa_move_literals): Replace xtensa_move_frag_symbols call with
code to use new literal_syms list.
* config/tc-xtensa.h (xtensa_symfield_type): Add is_loop_target and
is_branch_target flags.
"move_labels" argument and corresponding call to xtensa_move_labels.
(md_assemble): Add a separate call to xtensa_move_labels and remove
argument for call to xtensa_mark_literal_pool_location.
(xtensa_literal_position, xtensa_switch_to_literal_fragment): Fix
calls to xtensa_mark_literal_pool_location.
(xtensa_create_local_symbol): Delete and inline the code into...
(xtensa_create_literal_symbol): ...here.
(xtensa_frob_label): Combine conditionals.
(expression_maybe_register, xtensa_symbol_new_hook,
fix_new_exp_in_seg): Use symbol_get_tc.
ppc_cpu selection rather than replacing.
(ppc_set_cpu): Ignore and preserve PPC_OPCODE_ANY in ppc_cpu.
(md_begin): When PPC_OPCODE_ANY, insert all opcodes in ppc_hash.
and AC_CONFIG_COMMANDS instead of the three-argument AC_OUTPUT.
Specify AC_CONFIG_AUX_DIR.
* aclocal.m4: Regenerated with aclocal-1.7.
* configure: Regenerated with autoconf 2.57.
* Makefile.in, doc/Makefile.in: Regenerated with automake-1.7.
(dot_cfi, output_cfi_insn): Handle DW_CFA_GNU_window_save.
(output_cie): Don't use DW_EH_PE_pcrel if neither DIFF_EXPR_OK
nor tc_cfi_emit_pcrel_expr are defined.
(output_fde): Use tc_cfi_emit_pcrel_expr if available and
DIFF_EXPR_OK is not defined.
* config/tc-sparc.h (TARGET_USE_CFIPOP): Define.
(tc_cfi_frame_initial_instructions, tc_regname_to_dw2regnum,
tc_cfi_emit_pcrel_expr): Define.
(sparc_cfi_frame_initial_instructions, sparc_regname_to_dw2regnum,
sparc_cfi_emit_pcrel_expr): New prototypes.
(sparc_cie_data_alignment): New decl.
(DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Define.
* config/tc-sparc.c: Include dw2gencfi.h.
(sparc_cie_data_alignment): New variable.
(md_begin): Initialize it.
(sparc_cfi_frame_initial_instructions): New function.
(sparc_regname_to_dw2regnum): Likewise.
(sparc_cfi_emit_pcrel_expr): Likewise.
* doc/as.texinfo: Document .cfi_gnu_window_save.
* config/tc-sparc.c (s_common): Cast last argument to long and
change format string to shut up warning.
testsuite/
* gas/cfi/cfi-sparc-1.s: New test.
* gas/cfi/cfi-sparc-1.d: New test.
* gas/cfi/cfi-sparc64-1.s: New test.
* gas/cfi/cfi-sparc64-1.d: New test.
* gas/cfi/cfi.exp: Run them.
2003-08-16 Jason Eckhardt <jle@rice.edu>
* i860.h (fmov.ds): Expand as famov.ds.
(fmov.sd): Expand as famov.sd.
(pfmov.ds): Expand as pfamov.ds.
gas/testsuite/ChangeLog:
2003-08-16 Jason Eckhardt <jle@rice.edu>
* gas/i860/pseudo-ops01.{s,d}: New files.
* gas/i860/i860.exp: Execute the new test above.
* gas/i860/README.i860: Mention that pseudo-ops need more testing
and remove the align fill defect from the list.
* config/tc-i860.c (i860_check_label): New function.
* config/tc-i860.h (i860_check_label): New prototype.
(tc_check_label): Define macro as i860_check_label.
* config/tc-i860.c (s_align_wrapper): New function and prototype.
(md_pseudo_table): Change s_align_bytes to s_align_wrapper, remove
surrounding OBJ_ELF ifdef, and re-format slightly.
* doc/c-i860.texi: Document the special .align syntax available
in Intel mode.
2003-08-06 Jason Eckhardt <jle@rice.edu>
* config/tc-i860.c (i860_handle_align): New function.
* config/tc-i860.h (HANDLE_ALIGN): Define macro.
(MAX_MEM_FOR_RS_ALIGN_CODE): Define macro.
gas/testsuite:
2003-08-06 Jason Eckhardt <jle@rice.edu>
* gas/i860/dir-align01.{s,d}: New files.
* gas/i860/i860.exp: Execute the new test above.
2003-08-06 Jason Eckhardt <jle@rice.edu>
* config/tc-i860.c (i860_process_insn): Check that instructions
with their dual-bit set are 8-byte aligned.
gas/testsuite:
2003-08-06 Jason Eckhardt <jle@rice.edu>
* gas/i860/dual02-err.l: Update expected error message.
* gas/i860/README.i860: Remove dual02-err from known failure list.
* gas/i860/dir-intel01.{s,d}: New files.
* gas/i860/dir-intel02.{s,d}: New files.
* gas/i860/dir-intel03-err.{s,l}: New files.
* gas/i860/i860.exp: Execute the above new tests.
* gas/i860/dual01.{s,d}: New files.
* gas/i860/dual02-err.{s,l}: New files.
* gas/i860/dual03.{s,d}: New files.
* gas/i860/i860.exp: Execute the above new tests.
* gas/i860/README.i860: Update.
* config/tc-i860.c: Remove SYNTAX_SVR4 macro and occurrences.
(target_intel_syntax): Declare variable.
(OPTION_INTEL_SYNTAX): Declare macro.
(md_longopts): Add option -mintel-syntax.
(md_parse_option): Set target_intel_syntax.
(md_show_usage): Add -mintel-syntax usage.
(md_begin): Set reg_prefix based on target_intel_syntax.
(i860_process_insn): Skip register prefix only if there is one.
Parse relocatable expressions in either Intel or AT&T syntax based
on target_intel_syntax instead of the SYNTAX_SVR4 macro.
* doc/c-i860.texi: Document -mintel-syntax option and give blurb
about the differences in syntax.
2003-07-30 Jason Eckhardt <jle@rice.edu>
* elf32-i860.c: Convert to ISO C90. Remove superflous prototypes.
gas:
2003-07-30 Jason Eckhardt <jle@rice.edu>
* config/tc-i860.c: Convert to ISO C90.
2003-07-25 H.J. Lu <hongjiu.lu@intel.com>
* elf.c (_bfd_elf_new_section_hook): Set the default section
type to SHT_NULL.
(elf_fake_sections): Set the section type based on asect->flags
if it is SHT_NULL. Don't abort on processor specific section
types.
gas/
2003-07-25 H.J. Lu <hongjiu.lu@intel.com>
* config/obj-elf.c (obj_elf_change_section): Update
elf_section_type and elf_section_flags only when they are
specified.
* gas/m68hc11/abi.s: New test for abi elf flags.
* gas/m68hc11/abi-m68hc11-32-64.d: Test for 32-bit int, 64-bit float.
* gas/m68hc11/abi-m68hc11-16-64.d: Test for 16-bit int, 64-bit float.
* gas/m68hc11/abi-m68hc11-32-32.d: Test for 32-bit int, 32-bit float.
* gas/m68hc11/abi-m68hc11-16-32.d: Test for 16-bit int, 32-bit float.
* mips.h (CPU_RM7000): New macro.
(OPCODE_IS_MEMBER): Match CPU_RM7000 against 4650 insns.
bfd/
* archures.c (bfd_mach_mips7000): New.
* bfd-in2.h: Regenerated.
* cpu-mips.c (arch_info_struct): Add an entry for mips:7000.
* elfxx-mips.c (mips_set_isa_flags): Handle bfd_mach_mips7000.
(mips_mach_extensions): Add an entry for it.
opcodes/
* mips-dis.c (mips_arch_choices): Add rm7000 and rm9000 entries.
gas/
* config/tc-mips.c (hilo_interlocks): True for CPU_RM7000.
(mips_cpu_info_table): Add rm7000 and rm9000 entries.
gas/testsuite/
* gas/mips/rm7000.[sd]: New test.
* gas/mips/mips.exp: Run it.
* config/tc-mn10300.c (mn10300_check_fixup): Set GOT_PCREL type
for subtracts from GLOBAL_OFFSET_TABLE that could not be
simplified.
2002-07-18 Alexandre Oliva <aoliva@redhat.com>
* config/tc-mn10300.c (mn10300_check_fixup): Accept subtracts that
could not be simplified.
(tc_gen_reloc): Turn an absolute fx_subsy into part of fx_offset.
2001-11-04 Alexandre Oliva <aoliva@redhat.com>
* config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Don't adjust
BDF_RELOC_MN10300_GOT32.
* config/tc-mn10300.c (mn10300_fix_adjustable): If
TC_RELOC_RTSYM_LOC_FIXUP doesn't hold, it's not adjustable.
2001-05-09 Alexandre Oliva <aoliva@redhat.com>
* config/tc-mn10300.c (mn10300_parse_name): Don't return a
symbol if we know its value.
2001-05-09 Alexandre Oliva <aoliva@redhat.com>
* config/tc-mn10300.h (GLOBAL_OFFSET_TABLE_NAME): Remove
duplicate underscore prefix.
2001-05-09 Alexandre Oliva <aoliva@redhat.com>
* config/tc-mn10300.c (mn10300_parse_name): Store relocation
type in X_md, not X_add_number. Zero X_add_number.
(mn10300_check_fixup): Extract relocation type from X_md.
* config/tc-mn10300.h: Update comment.
2001-04-14 Alexandre Oliva <aoliva@redhat.com>
* config/tc-mn10300.h (O_GOTOFF, O_PLT, O_GOT): Replace with...
(O_PIC_reloc): this.
* config/tc-mn10300.c (mn10300_PIC_related_p): Use it.
(mn10300_check_fixup): Likewise.
(mn10300_parse_name): Set X_add_number to relocation type.
* config/tc-mn10300.h (DIFF_EXPR_OK, GLOBAL_OFFSET_TABLE_NAME,
TC_RELOC_RTSYM_LOC_FIXUP, md_parse_name, TC_CONS_FIX_NEW,
O_GOTOFF, O_PLT, O_GOT): Define.
* config/tc-mn10300.c (mn10300_PIC_related_p): New fn.
(mn10300_check_fixup): New fn.
(md_assemble): Call it. Check for PIC-related relocs.
(mn10300_cons_fix_new): Likewise. New fn.
(mn10300_end_of_match): New fn.
(mn10300_md_parse_name_cont): New fn.
Thiemo Seufer
Chris Demetriou
Dave Brolley
Dave Anglin
Jason Thorpe
H.J. Lu
Hans-Peter Nilsson
Alan Modra
Bob Wilson
Nick Clifton
Stephane Carrez
Richard Sandiford
Daniel Jacobowitz
Maciej W. Rozycki
Jakub Jelinek
Jason Eckhardt
Andreas Schwab
Joern Rennecke
Rainer Orth
Alexandre Oliva