30c0909079
include/elf/
...
* mips.h (ELF_ST_IS_MIPS16, ELF_ST_SET_MIPS16): New macros.
bfd/
* elfxx-mips.c (mips_elf_check_mips16_stubs): Use ELF_ST_IS_MIPS16.
(mips_elf_calculate_relocation): Likewise.
(_bfd_mips_elf_add_symbol_hook): Likewise.
(_bfd_mips_elf_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
opcodes/
* mips-dis.c (_print_insn_mips): Use ELF_ST_IS_MIPS16.
gas/
* config/tc-mips.c (mips16_mark_labels): Use ELF_ST_SET_MIPS16.
(mips_fix_adjustable): Likewise.
(mips_frob_file_after_relocs): Likewise.
gas/testsuite/
* gas/mips/mips16-vis-1.d, gas/mips/mips16-vis-1.s: New tests.
* gas/mips/mips.exp: Run them.
2008-07-10 19:05:29 +00:00
bfbba8e4ee
* config/tc-m68k.c (m68k_set_cpu, m68k_set_arch): Don't complain
...
about overriding an earlier setting.
2008-07-08 06:33:41 +00:00
b19e8a9bae
* config/tc-mips.c (NO_ISA_COP): New macro.
...
(COP_INSN): New macro.
(is_opcode_valid): Use them.
(macro) <ld_st>: Use them. Don't accept coprocessor load store
insns based on the ISA if CPU is NO_ISA_COP.
<copz>: Likewise for coprocessor operations.
2008-07-07 19:16:23 +00:00
79947c5421
gas/
...
2008-07-07 Paul Brook <paul@codesourcery.com>
* config/tc-arm.c (arm_fix_adjustable): Don't adjust MOVW/MOVT
relocations.
gas/testsuite/
2008-07-07 Paul Brook <paul@codesourcery.com>
* gas/arm/movw-local.d: New test.
* gas/arm/movw-local.s: New test.
2008-07-07 19:12:58 +00:00
d62f07d07d
* config/tc-spu.c (md_apply_fix): Handle fully resolved
...
BFD_RELOC_32_PCREL, BFD_RELOC_SPU_HI16 and BFD_RELOC_SPU_LO16.
2008-07-04 13:04:04 +00:00
c8187e1509
gas/
...
* config/tc-ppc.c (parse_cpu): Handle -m464.
(md_show_usage): Likewise.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle -M464.
(print_ppc_disassembler_options): Likewise.
* ppc-opc.c (PPC464): Define.
(powerpc_opcodes): Add mfdcrux and mtdcrux.
2008-06-25 16:49:03 +00:00
3bb06f783c
/gas:
...
2008-06-24 Eric B. Weddington <eric.weddington@atmel.com>
Add support for ATtiny13A.
* config/tc-avr.c (mcu_types): Add attiny13a.
* doc/c-avr.texi: Likewise.
2008-06-25 16:19:11 +00:00
1afc8defa6
PR gas/6607
...
* config/tc-mmix.c (s_loc): Assume "negative" addresses belong to
text_section. Do the "stepping backwards" test for text_section
using unsigned operands.
2008-06-16 15:04:41 +00:00
fa452fa683
include/opcode/
...
* ppc.h (ppc_cpu_t): New typedef.
(struct powerpc_opcode <flags>): Use it.
(struct powerpc_operand <insert, extract>): Likewise.
(struct powerpc_macro <flags>): Likewise.
gas/
* config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
(ppc_insert_operand): Likewise.
(ppc_machine): Likewise.
* config/tc-ppc.h: #include "opcode/ppc.h"
(struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
(ppc_cpu): Update extern decl.
opcodes/
* ppc-dis.c (print_insn_powerpc): Update prototye to use new
ppc_cpu_t typedef.
(struct dis_private): New.
(POWERPC_DIALECT): New define.
(powerpc_dialect): Renamed to...
(powerpc_init_dialect): This. Update to use ppc_cpu_t and
struct dis_private.
(print_insn_big_powerpc): Update for using structure in
info->private_data.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Change type of dialect param to ppc_cpu_t.
(skip_optional_operands): Likewise.
(print_insn_powerpc): Likewise. Remove initialization of dialect.
* ppc-opc.c (extract_bat, extract_bba, extract_bdm, extract_bdp,
extract_bo, extract_boe, extract_fxm, extract_mb6, extract_mbe,
extract_nb, extract_nsi, extract_rbs, extract_sh6, extract_spr,
extract_sprg, extract_tbr insert_bat, insert_bba, insert_bdm,
insert_bdp, insert_bo, insert_boe, insert_fxm, insert_mb6, insert_mbe,
insert_nsi, insert_ral, insert_ram, insert_raq, insert_ras, insert_rbs,
insert_sh6, insert_spr, insert_sprg, insert_tbr): Change the dialect
param to be of type ppc_cpu_t. Update prototype.
2008-06-13 20:16:00 +00:00
dd3cbb7ef7
* mips.h: Document new field descriptors +Q.
...
(OP_SH_SEQI, OP_MASK_SEQI): New bit mask and shift count for SEQI.
opcodes/
* mips-dis.c (print_insn_args): Handle field descriptor +Q.
* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions seq,
seqi, sne and snei.
gas/
* config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
(mips_ip): Likewise.
(macro_build): Likewise.
(CPU_HAS_SEQ): New macro.
(macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
gas/testsuite/
* gas/mips/octeon.s, gas/mips/octeon.d: Add tests for seq* and sne*.
* gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: Add tests for seqi
and snei.
2008-06-12 21:44:54 +00:00
bb35fb24c1
include/opcode/
...
* mips.h: Document new field descriptors +x, +X, +p, +P, +s, +S.
Update comment before MIPS16 field descriptors to mention MIPS16.
(OP_SH_BBITIND, OP_MASK_BBITIND): New bit mask and shift count for
BBIT.
(OP_SH_CINSPOS, OP_MASK_CINSPOS, OP_SH_CINSLM1, OP_MASK_CINSLM1):
New bit masks and shift counts for cins and exts.
gas/
* config/tc-mips.c (validate_mips_insn): Handle field descriptors
+x, +X, +p, +P, +s, +S.
(mips_ip): Likewise.
opcodes/
* mips-dis.c (print_insn_args): Handle field descriptors +x, +p,
+s, +S.
* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions
baddu, bbit*, cins*, dmul, pop, dpop, exts*, mtm*, mtp*, syncs,
syncw, syncws, vm3mulu, vm0 and vmulu.
gas/testsuite/
* gas/mips/octeon.s, gas/mips/octeon.d: Add tests for baddu,
bbit*, cins*, dmul, pop, dpop, exts*, mtm*, mtp*, syncs, syncw,
syncws, vm3mulu, vm0 and vmulu.
* gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: New test.
* gas/mips/mips.exp: Run it. Run octeon test with
run_dump_test_arches.
2008-06-12 16:14:52 +00:00
e8568f6c63
/gas:
...
2008-06-09 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Remove support for ATmega32HVB device.
* doc/c-avr.texi: Likewise.
2008-06-09 16:07:02 +00:00
cb19c0328d
gas/
...
2008-06-03 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (set_sse_check): New.
(md_pseudo_table): Add "sse_check".
gas/testsuite/
2008-06-03 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run sse-check-none and
x86-64-sse-check-none.
* gas/i386/sse-check-none.d: New.
* gas/i386/sse-check-none.s: Likewise.
* gas/i386/x86-64-sse-check-none.d: Likewise.
2008-06-03 17:31:52 +00:00
4ecab7d4c2
2008-06-03 Paul Brook <paul@codesourcery.com>
...
gas/
* config/tc-arm.c (do_t_rbit): Populate both rm fields.
gas/testsuite/
* gas/arm/thumb32.d: Update expected output.
2008-06-03 14:29:07 +00:00
0a903babef
PR 5523
...
* config/tc-avr.c (avr_ldi_expression): Do not warn about unknown
relocs here.
2008-05-30 14:20:27 +00:00
b15591bb36
* config/tc-mips.c (mips_cpu_info_table): Move records for
...
ST Loongson-2E/2F processors to a better place.
2008-05-29 16:03:41 +00:00
95f283e8f6
2008-05-23 H.J. Lu <hongjiu.lu@intel.com>
...
PR gas/6518
* config/tc-i386.c (match_template): Report ambiguous operand
size, not invalid suffix when there is no match in Intel
syntax.
2008-05-23 13:55:36 +00:00
c462b453bd
2008-05-22 Paul Brook <paul@codesourcery.com>
...
gas/
* config/tc-arm.c (parse_cond): Covert to lowercase before matching.
2008-05-22 17:03:55 +00:00
7fac05361c
* config/tc-arm.c (arm_cpus): Add Faraday ARMv4 and ARMv5TE
...
compatible cores: fa526, fa626, fa626te, fa726te.
* doc/c-arm.texi (ARM Opts): Add -mcpu={fa526, fa626, fa626te,
fa726te} options.
2008-05-21 08:20:17 +00:00
35903be00c
gas/
...
* config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
with non-MIPS16 relocs.
gas/testsuite/
* gas/mips/mips16-hilo-match.s: New test.
* gas/mips/mip16-hilo-match.d: New test output.Index: config/tc-mips.c
2008-05-09 19:28:47 +00:00
c41e87e39e
* config/tc-mips.c (md_begin): Use strncmp to compare TARGET_OS, in
...
case that some characters append at the end of the name.
(mips_ip): Likewise.
(s_change_sec): Likewise.
(md_section_align): Likewise.
2008-05-09 18:18:22 +00:00
51c8ebc1d0
bfd/
...
* elf32-xtensa.c (xtensa_property_section_name): New.
(xtensa_make_property_section): New.
(xtensa_get_property_section): Make static. Do not create a new
section if it does not exist.
gas/
* config/tc-xtensa.c (xtensa_create_property_segments): Use
xtensa_make_property_section instead of xtensa_get_property_section.
(xtensa_create_xproperty_segments): Likewise.
2008-05-07 23:13:09 +00:00
f1f8f695c0
gas/
...
2008-05-02 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention XSAVE, EPT and MOVBE.
* config/tc-i386.c (cpu_arch): Add .movbe and .ept.
(md_show_usage): Add .movbe and .ept.
* doc/c-i386.texi: Add movbe and ept to -march=. Document
.movbe and .ept.
gas/testsuite/
2008-05-02 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run movbe, movbe-intel, inval-movbe, ept,
ept-intel, inval-ept, x86-64-movbe, x86-64-movbe-intel,
x86-64-inval-movbe. x86-64-ept, x86-64-ept-intel and
x86-64-inval-ept.
* gas/i386/arch-10.s: Add movbe and invept.
* gas/i386/x86-64-arch-2.s: Likewise.
* gas/i386/ept.d: New file
* gas/i386/ept-intel.d: Likewise.
* gas/i386/ept.s: Likewise.
* gas/i386/inval-ept.l: Likewise.
* gas/i386/inval-ept.s: Likewise.
* gas/i386/inval-movbe.l: Likewise.
* gas/i386/inval-movbe.s: Likewise.
* gas/i386/movbe.d: Likewise.
* gas/i386/movbe-intel.d: Likewise.
* gas/i386/movbe.s: Likewise.
* gas/i386/x86-64-inval-ept.l: Likewise.
* gas/i386/x86-64-inval-ept.s: Likewise.
* gas/i386/x86-64-inval-movbe.l: Likewise.
* gas/i386/x86-64-inval-movbe.s: Likewise.
* gas/i386/x86-64-ept.d: Likewise.
* gas/i386/x86-64-ept-intel.d: Likewise.
* gas/i386/x86-64-ept.s: Likewise.
* gas/i386/x86-64-movbe.d: Likewise.
* gas/i386/x86-64-movbe-intel.d: Likewise.
* gas/i386/x86-64-movbe.s: Likewise.
* gas/i386/arch-10.d: Updated.
* gas/i386/arch-10-1.l: Likewise.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
opcodes/
2008-05-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (MOVBE_Fixup): New.
(Mo): Likewise.
(PREFIX_0F3880): Likewise.
(PREFIX_0F3881): Likewise.
(PREFIX_0F38F0): Updated.
(prefix_table): Add PREFIX_0F3880 and PREFIX_0F3881. Update
PREFIX_0F38F0 and PREFIX_0F38F1 for movbe.
(three_byte_table): Use PREFIX_0F3880 and PREFIX_0F3881.
* i386-gen.c (cpu_flag_init): Add CPU_MOVBE_FLAGS and
CPU_EPT_FLAGS.
(cpu_flags): Add CpuMovbe and CpuEPT.
* i386-opc.h (CpuMovbe): New.
(CpuEPT): Likewise.
(CpuLM): Updated.
(i386_cpu_flags): Add cpumovbe and cpuept.
* i386-opc.tbl: Add entries for movbe and EPT instructions.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2008-05-02 16:53:40 +00:00
2b661f3dc2
* config/tc-sparc.c (v9a_asr_table): Fix order of softint entries.
2008-04-30 03:50:39 +00:00
037b32b9ff
* config/tc-mips.c (file_mips_soft_float, file_mips_single_float):
...
New statics.
(OPTION_ELF_BASE): Make room for new option macros.
(OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
OPTION_DOUBLE_FLOAT): New option macros.
(md_longopts): Add msoft-float, mhard-float, msingle-float and
mdouble-float.
(md_parse_option): Handle OPTION_SINGLE_FLOAT,
OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
(md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
and -mdouble-float.
(struct mips_set_options): New fields soft_float and single_float.
(mips_opts): Initialized them. Add comment for each field
initializer.
(mips_after_parse_args): Set them based on file_mips_soft_float
and file_mips_single_float.
(s_mipsset): Add support for `.set softfloat', `.set hardfloat',
`.set singlefloat' and `.set doublefloat'.
(is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
Handle single-float and soft-float instructions here.
(macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
(is_opcode_valid_16): New function.
(mips16_ip): Use it instead of OPCODE_IS_MEMBER.
(macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
M_S_DOB>: Remove special-casing of r4650.
* doc/c-mips.texi (-march=): Add Octeon.
(MIPS Opts): Document -msoft-float and -mhard-float. Document
-msingle-float and -mdouble-float.
(MIPS floating-point): New section. Document `.set softfloat' and
`.set hardfloat'. Document `.set singlefloat' and `.set
doublefloat'.
2008-04-28 17:06:28 +00:00
f04d18b76a
gas/
...
* config/tc-sparc.c: Accept 'softint_clear' and 'softint_set'
%asr aliases.
* doc/c-sparc.texi: Consistently refer to architecture 'versions',
rather than occaisionally 'levels'. Consistently refer to Sun's
UNIX variant as SunOS, every version of Solaris is also SunOS.
Document new 'softint_clear' and 'softint_set' aliases. Clarify
which architecture versions support '%dcr', '%cq', and '%gl'. Add
section on 32-bit/64-bit opcode translations.
opcodes/
* sparc-dis.c: Emit %stick instead of %sys_tick, and %stick_cmpr
instead of %sys_tick_cmpr, as suggested in architecture manuals.
2008-04-25 19:58:03 +00:00
fe4fa32c96
2008-04-23 Mike Frysinger <vapier@gentoo.org>
...
* Makefile.am (OBJ_FORMAT_CFILES): Add config/obj-fdpicelf.c.
(OBJ_FORMAT_HFILES): Add config/obj-fdpicelf.h.
(obj-fdpicelf.o): Define.
* Makefile.in: Regenerate.
* configure.tgt: Set bfd_gas to yes when fmt is fdpicelf.
(bfin-*-*): Delete.
(bfin-*-linux-uclibc): New; set fmt to fdpicelf and em to linux.
(bfin-*-uclinux*): New; set fmt to elf and em to linux.
* config/obj-fdpicelf.c: New.
* config/obj-fdpicelf.h: Likewise.
* config/tc-bfin.c (bfin_flags, bfin_pic_flag): Set default based on
the OBJ_FDPIC_ELF define.
(OPTION_NOPIC): Define.
(md_longopts): Add mnopic and mno-fdpic.
(md_parse_option): Handle OPTION_NOPIC.
2008-04-23 18:40:34 +00:00
44bf236263
* config/obj-elf.c (obj_elf_section_type): Add prototype
...
before obj_elf_section_word and add 'warn' arg.
(obj_elf_section_word): Add type pointer arg, and if no #SECTION
is matched, try checking for #SECTION_TYPE.
(obj_elf_section): Adjust for new args.
(obj_elf_type_name): New function.
(obj_elf_type): Call it, and accept STT_foo number strings
in .type statements as output by SunPRO compiler.
2008-04-23 13:54:56 +00:00
1a6b486f73
opcodes/
...
* sparc-opc.c (asi_table): Add UltraSPARC and Niagara
extended values.
(prefetch_table): Add missing values.
gas/
* config/tc-sparc.c (v9a_asr_table): Add missing
'stick' and 'stick_cmpr', and document ordering rules
of table.
(tc_gen_reloc): Accept BFD_RELOC_SPARC_PC22 and
BFD_RELOC_SPARC_PC10.
* doc/c-sparc.texi: New section on Sparc constants.
Add documentation for %stick and %stick_cmpr.
gas/testsuite/
* gas/sparc/pc2210.d: New file.
* gas/sparc/pc2210.d: Likewise.
* gas/sparc/sparc.exp: Run new %pc22/%pc10 relocation test.
2008-04-23 07:49:33 +00:00
81f8a9131a
gas/
...
2008-04-22 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (md_assemble): Don't check SSE instructions
if noavx is 0.
opcodes/
2008-04-22 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Add NoAVX.
* i386-opc.h (NoAVX): New.
(OldGcc): Updated.
(i386_opcode_modifier): Add noavx.
* i386-opc.tbl: Add NoAVX to SSE, SSE2, SSE3 and SSSE3
instructions which don't have AVX equivalent.
* i386-tbl.h: Regenerated.
2008-04-22 22:27:13 +00:00
eff014d916
2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
...
* config/tc-i386.c (build_modrm_byte): Don't check FMA to swap
REG and NDS for instructions with immediate operand.
2008-04-18 18:22:37 +00:00
dae39accc2
gas/
...
2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (build_modrm_byte): Swap REG and NDS for
FMA.
gas/testsuite/
2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/arch-10.d: Updated.
* gas/i386/avx.d: Likewise.
* gas/i386/avx-intel.d: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/x86-64-avx.d: Likewise.
* gas/i386/x86-64-avx-intel.d: Likewise.
opcodes/
2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_VEX_FMA): New.
(OP_EX_VexImmW): Likewise.
(VexFMA): Likewise.
(Vex128FMA): Likewise.
(EXVexImmW): Likewise.
(get_vex_imm8): Likewise.
(OP_EX_VexReg): Likewise.
(vex_i4_done): Renamed to ...
(vex_w_done): This.
(prefix_table): Replace EXVexW with EXVexImmW on vpermil2ps
and vpermil2pd. Replace Vex/Vex128 with VexFMA/Vex128FMA on
FMA instructions.
(print_insn): Updated.
(OP_EX_VexW): Rewrite to swap register in VEX with EX.
(OP_REG_VexI4): Check invalid high registers.
2008-04-18 13:10:32 +00:00
14865d7608
* config/tc-sparc.c (sparc_ip): Recognize %pc22 and %pc10.
2008-04-18 08:47:35 +00:00
739f7f82be
bfd/
...
* reloc.c (BFD_RELOC_SPARC_GOTDATA_HIX22,
BFD_RELOC_SPARC_GOTDATA_LOX10, BFD_RELOC_SPARC_GOTDATA_OP_HIX22,
BFD_RELOC_SPARC_GOTDATA_OP_LOX10, BFD_RELOC_SPARC_GOTDATA_OP): New.
* libbfd.h: Regnerate.
* bfd-in2.h: Regenerate.
* elfxx-sparc.c (_bfd_sparc_elf_howto_table): Add entries for
GOTDATA relocations.
(sparc_reloc_map): Likewise.
(_bfd_sparc_elf_check_relocs): Handle R_SPARC_GOTDATA_* like
R_SPARC_GOT*.
(_bfd_sparc_elf_gc_sweep_hook): Likewise.
(_bfd_sparc_elf_relocate_section): Transform R_SPARC_GOTDATA_HIX22,
R_SPARC_GOTDATA_LOX10, R_SPARC_GOTDATA_OP_HIX22, and
R_SPARC_GOTDATA_OP_LOX10 into the equivalent R_SPARC_GOT* reloc.
Simply ignore R_SPARC_GOTDATA_OP relocations.
gas/
* config/tc-sparc.c (sparc_ip): Add support for gotdata mnemonics
and relocation generation.
(tc_gen_reloc): Likewise.
gas/testsuite/
* gas/sparc/gotops32.d: New.
* gas/sparc/gotops32.s: Likewise.
* gas/sparc/gotops64.d: Likewise.
* gas/sparc/gotops64.s: Likewise.
* gas/sparc/sparc.exp: Run new gotdata tests.
ld/testsuite/
* ld-sparc/gotop32.dd: New.
* ld-sparc/gotop32.rd: Likewise.
* ld-sparc/gotop32.s: Likewise.
* ld-sparc/gotop32.sd: Likewise.
* ld-sparc/gotop32.td: Likewise.
* ld-sparc/gotop64.dd: Likewise.
* ld-sparc/gotop64.rd: Likewise.
* ld-sparc/gotop64.s: Likewise.
* ld-sparc/gotop64.sd: Likewise.
* ld-sparc/gotop64.td: Likewise.
* ld-sparc/sparc.exp: Run new gotdata tests.
2008-04-16 08:51:18 +00:00
52b5ca5b35
2008-04-15 Andrew Stubbs <andrew.stubbs@st.com>
...
gas/
* config/tc-sh.c (md_apply_fix): Make sure BFD_RELOC_SH_PCRELIMM8BY4
relocations are properly aligned, and not negative.
gas/testsuite/
* gas/sh/arch/arch.exp: Align PC-relative instructions in the gererated
assembly files.
* gas/sh/arch/sh-dsp.s: Regenerate.
* gas/sh/arch/sh.s: Regenerate.
* gas/sh/arch/sh2.s: Regenerate.
* gas/sh/arch/sh2a-nofpu-or-sh3-nommu.s: Regenerate.
* gas/sh/arch/sh2a-nofpu-or-sh4-nommu-nofpu.s: Regenerate.
* gas/sh/arch/sh2a-nofpu.s: Regenerate.
* gas/sh/arch/sh2a-or-sh3e.s: Regenerate.: Regenerate.
* gas/sh/arch/sh2a-or-sh4.s: Regenerate.
* gas/sh/arch/sh2a.s: Regenerate.
* gas/sh/arch/sh2e.s: Regenerate.
* gas/sh/arch/sh3-dsp.s: Regenerate.
* gas/sh/arch/sh3-nommu.s: Regenerate.
* gas/sh/arch/sh3.s: Regenerate.
* gas/sh/arch/sh3e.s: Regenerate.
* gas/sh/arch/sh4-nofpu.s: Regenerate.
* gas/sh/arch/sh4-nommu-nofpu.s: Regenerate.
* gas/sh/arch/sh4.s: Regenerate.
* gas/sh/arch/sh4a-nofpu.s: Regenerate.
* gas/sh/arch/sh4a.s: Regenerate.
* gas/sh/arch/sh4al-dsp.s: Regenerate.
* gas/sh/err-mova.s: New test.
ld/testsuite/
* ld-sh/arch/sh-dsp.s: Regenerate.
* ld-sh/arch/sh.s: Regenerate.
* ld-sh/arch/sh2.s: Regenerate.
* ld-sh/arch/sh2a-nofpu-or-sh3-nommu.s: Regenerate.
* ld-sh/arch/sh2a-nofpu-or-sh4-nommu-nofpu.s: Regenerate.
* ld-sh/arch/sh2a-nofpu.s: Regenerate.
* ld-sh/arch/sh2a-or-sh3e.s: Regenerate.: Regenerate.
* ld-sh/arch/sh2a-or-sh4.s: Regenerate.
* ld-sh/arch/sh2a.s: Regenerate.
* ld-sh/arch/sh2e.s: Regenerate.
* ld-sh/arch/sh3-dsp.s: Regenerate.
* ld-sh/arch/sh3-nommu.s: Regenerate.
* ld-sh/arch/sh3.s: Regenerate.
* ld-sh/arch/sh3e.s: Regenerate.
* ld-sh/arch/sh4-nofpu.s: Regenerate.
* ld-sh/arch/sh4-nommu-nofpu.s: Regenerate.
* ld-sh/arch/sh4.s: Regenerate.
* ld-sh/arch/sh4a-nofpu.s: Regenerate.
* ld-sh/arch/sh4a.s: Regenerate.
* ld-sh/arch/sh4al-dsp.s: Regenerate.
2008-04-15 15:53:26 +00:00
19a6653ce8
ppc e500mc support
2008-04-14 11:01:38 +00:00
daf50ae75d
gas/
...
2008-04-10 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention -msse-check=[none|error|warning].
* config/tc-i386.c (sse_check): New.
(OPTION_MSSE_CHECK): Likewise.
(md_assemble): Check SSE instructions if needed.
(md_longopts): Add -msse-check.
(md_parse_option): Handle OPTION_MSSE_CHECK.
(md_show_usage): Show -msse-check=[none|error|warning].
* doc/c-i386.texi: Document -msse-check=[none|error|warning].
gas/testsuite/
2008-04-10 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run sse-check, sse-check-warn,
sse-check-error, x86-64-sse-check, x86-64-sse-check-warn and
x86-64-sse-check-error.
* gas/i386/sse-check.d: New.
* gas/i386/sse-check.s: Likewise.
* gas/i386/sse-check-error.l: Likewise.
* gas/i386/sse-check-error.s: Likewise.
* gas/i386/sse-check-warn.d: Likewise.
* gas/i386/sse-check-warn.e: Likewise.
* gas/i386/x86-64-sse-check.d: Likewise.
* gas/i386/x86-64-sse-check-error.l: Likewise.
* gas/i386/x86-64-sse-check-error.s: Likewise.
* gas/i386/x86-64-sse-check-warn.d: Likewise.
2008-04-10 17:53:40 +00:00
40f1253383
gas/
...
2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (parse_real_register): Return AVX register
only if AVX is enabled.
gas/testsuite/
2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/att-regs.s: Add AVX register test.
* gas/i386/intel-regs.s: Likewise.
* gas/i386/att-regs.d: Updated.
* gas/i386/intel-regs.d: Likewise.
2008-04-07 13:07:16 +00:00
783d3e7187
PR gas/6043
...
* config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.
* gas/sh/sh64/eh-1.d: New.
* gas/sh/sh64/eh-1.d: Likewise.
2008-04-07 02:55:08 +00:00
1b6e95c267
2008-04-04 Adrian Bunk <bunk@stusta.de>
...
Bob Wilson <bob.wilson@acm.org>
* config/tc-xtensa.c (xg_apply_fix_value): Check return code from
call to decode_reloc.
2008-04-04 23:25:49 +00:00
594ab6a333
gas/
...
2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention XSAVE. Change CLMUL to PCLMUL.
* config/tc-i386.c (cpu_arch): Add .pclmul.
(md_show_usage): Replace clmul with pclmul.
* doc/c-i386.texi: Likewise.
gas/testsuite/
2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/arch-10-1.l: Replace CLMUL with PCLMUL.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/arch-10.s: Likewise.
* gas/i386/clmul-intel.d: Likewise.
* gas/i386/clmul.d: Likewise.
* gas/i386/clmul.s: Likewise.
* gas/i386/x86-64-arch-2.s: Likewise.
* gas/i386/x86-64-clmul-intel.d: Likewise.
* gas/i386/x86-64-clmul.d: Likewise.
* gas/i386/x86-64-clmul.s: Likewise.
* gas/i386/arch-10.d: Replace clmul with pclmul.
* gas/i386/x86-64-arch-2.d: Likewise.
opcodes/
2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flag_init): Replace CPU_CLMUL_FLAGS/CpuCLMUL
with CPU_PCLMUL_FLAGS/CpuPCLMUL.
(cpu_flags): Replace CpuCLMUL with CpuPCLMUL.
* i386-opc.tbl: Likewise.
* i386-opc.h (CpuCLMUL): Renamed to ...
(CpuPCLMUL): This.
(CpuFMA): Updated.
(i386_cpu_flags): Replace cpuclmul with cpupclmul.
* i386-init.h: Regenerated.
2008-04-04 16:34:23 +00:00
c0f3af977b
binutils/
...
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* dwarf.c (dwarf_regnames_i386): Add AVX registers.
(dwarf_regnames_x86_64): Likewise.
gas/
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.
* doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
Document -msse2avx, .avx, .aes, .clmul and .fma.
* config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
(vex_prefix): Likewise.
(sse2avx): Likewise.
(CPU_FLAGS_ARCH_MATCH): Likewise.
(CPU_FLAGS_64BIT_MATCH): Likewise.
(CPU_FLAGS_32BIT_MATCH): Likewise.
(CPU_FLAGS_PERFECT_MATCH): Likewise.
(regymm): Likewise.
(vex_imm4): Likewise.
(fits_in_imm4): Likewise.
(build_vex_prefix): Likewise.
(VEX_check_operands): Likewise.
(bad_implicit_operand): Likewise.
(OPTION_MSSE2AVX): Likewise.
(T_YMMWORD): Likewise.
(_i386_insn): Add vex.
(cpu_arch): Add .avx, .aes, .clmul and .fma.
(cpu_flags_match): Changed to take a pointer to const template.
Enable encoding SSE instructions with VEX prefix for -msse2avx.
(match_mem_size): Also check ymmword.
(operand_type_match): Clear ymmword.
(md_begin): Allow '_' in mnemonic.
(type_names): Add OPERAND_TYPE_VEX_IMM4.
(process_immext): Update assert.
(md_assemble): Don't call process_immext if sse2avx and immext
are true. Call build_vex_prefix if vex is true.
(parse_insn): Updated for cpu_flags_match.
(swap_operands): Handle 5 operands.
(match_template): Handle 5 operands. Updated for cpu_flags_match.
Check regymm. Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
(process_suffix): Handle YMMWORD_MNEM_SUFFIX.
(check_byte_reg): Check regymm.
(process_operands): Duplicate the destination register for
-msse2avx if needed.
(build_modrm_byte): Updated for instructions with VEX encoding.
(output_insn): Output VEX prefix if needed.
(md_longopts): Add msse2avx.
(md_parse_option): Handle OPTION_MSSE2AVX.
(md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
(intel_e09): Support YMMWORD.
(intel_e11): Likewise.
(intel_get_token): Likewise.
gas/testsuite/
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run aes, aes-intel, x86-64-aes,
x86-64-aes-intel, avx, avx-intel, inval-avx, x86-64-avx,
x86-64-avx-intel and x86-64-inval-avx.
* gas/cfi/cfi-i386.s: Add tests for AVX register maps.
* gas/cfi/cfi-x86_64.s: Likewise.
* gas/i386/aes.d: New.
* gas/i386/aes.s: Likewise.
* gas/i386/aes-intel.d: Likewise.
* gas/i386/avx.d: Likewise.
* gas/i386/avx.s: Likewise.
* gas/i386/avx-intel.d: Likewise.
* gas/i386/clmul.d: Likewise.
* gas/i386/clmul-intel.d: Likewise.
* gas/i386/clmul.s: Likewise.
* gas/i386/i386.exp: Likewise.
* gas/i386/inval-avx.l: Likewise.
* gas/i386/inval-avx.s: Likewise.
* gas/i386/sse2avx.d: Likewise.
* gas/i386/sse2avx.s: Likewise.
* gas/i386/x86-64-aes.d: Likewise.
* gas/i386/x86-64-aes.s: Likewise.
* gas/i386/x86-64-aes-intel.d: Likewise.
* gas/i386/x86-64-avx.d: Likewise.
* gas/i386/x86-64-avx.s: Likewise.
* gas/i386/x86-64-avx-intel.d: Likewise.
* gas/i386/x86-64-clmul.d: Likewise.
* gas/i386/x86-64-clmul-intel.d: Likewise.
* gas/i386/x86-64-clmul.s: Likewise.
* gas/i386/x86-64-inval-avx.l: Likewise.
* gas/i386/x86-64-inval-avx.s: Likewise.
* gas/i386/x86-64-sse2avx.d: Likewise.
* gas/i386/x86-64-sse2avx.s: Likewise.
* gas/i386/arch-10.s: Add tests for AVX, AES, CLMUL and FMA.
* gas/i386/x86-64-arch-2.s: Likewise.
* gas/i386/rexw.s: Add AVX tests.
* gas/i386/x86-64-opcode-inval.s: Remove lds/les test.
* gas/cfi/cfi-i386.d: Updated.
* gas/cfi/cfi-x86_64.d: Likewise.
* gas/i386/arch-10.d: Likewise.
* gas/i386/arch-10-1.l: Likewise.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/rexw.d: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval-intel.d: Likewise.
include/opcode/
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (MAX_OPERANDS): Set to 5.
(MAX_MNEM_SIZE): Changed to 20.
opcodes/
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_E_register): New.
(OP_E_memory): Likewise.
(OP_VEX): Likewise.
(OP_EX_Vex): Likewise.
(OP_EX_VexW): Likewise.
(OP_XMM_Vex): Likewise.
(OP_XMM_VexW): Likewise.
(OP_REG_VexI4): Likewise.
(PCLMUL_Fixup): Likewise.
(VEXI4_Fixup): Likewise.
(VZERO_Fixup): Likewise.
(VCMP_Fixup): Likewise.
(VPERMIL2_Fixup): Likewise.
(rex_original): Likewise.
(rex_ignored): Likewise.
(Mxmm): Likewise.
(XMM): Likewise.
(EXxmm): Likewise.
(EXxmmq): Likewise.
(EXymmq): Likewise.
(Vex): Likewise.
(Vex128): Likewise.
(Vex256): Likewise.
(VexI4): Likewise.
(EXdVex): Likewise.
(EXqVex): Likewise.
(EXVexW): Likewise.
(EXdVexW): Likewise.
(EXqVexW): Likewise.
(XMVex): Likewise.
(XMVexW): Likewise.
(XMVexI4): Likewise.
(PCLMUL): Likewise.
(VZERO): Likewise.
(VCMP): Likewise.
(VPERMIL2): Likewise.
(xmm_mode): Likewise.
(xmmq_mode): Likewise.
(ymmq_mode): Likewise.
(vex_mode): Likewise.
(vex128_mode): Likewise.
(vex256_mode): Likewise.
(USE_VEX_C4_TABLE): Likewise.
(USE_VEX_C5_TABLE): Likewise.
(USE_VEX_LEN_TABLE): Likewise.
(VEX_C4_TABLE): Likewise.
(VEX_C5_TABLE): Likewise.
(VEX_LEN_TABLE): Likewise.
(REG_VEX_XX): Likewise.
(MOD_VEX_XXX): Likewise.
(PREFIX_0F38DB..PREFIX_0F38DF): Likewise.
(PREFIX_0F3A44): Likewise.
(PREFIX_0F3ADF): Likewise.
(PREFIX_VEX_XXX): Likewise.
(VEX_OF): Likewise.
(VEX_OF38): Likewise.
(VEX_OF3A): Likewise.
(VEX_LEN_XXX): Likewise.
(vex): Likewise.
(need_vex): Likewise.
(need_vex_reg): Likewise.
(vex_i4_done): Likewise.
(vex_table): Likewise.
(vex_len_table): Likewise.
(OP_REG_VexI4): Likewise.
(vex_cmp_op): Likewise.
(pclmul_op): Likewise.
(vpermil2_op): Likewise.
(m_mode): Updated.
(es_reg): Likewise.
(PREFIX_0F38F0): Likewise.
(PREFIX_0F3A60): Likewise.
(reg_table): Add REG_VEX_71...REG_VEX_73 and REG_VEX_AE.
(prefix_table): Add PREFIX_0F38DB..PREFIX_0F38DF, PREFIX_0F3ADF
and PREFIX_VEX_XXX entries.
(x86_64_table): Use VEX_C4_TABLE and VEX_C5_TABLE.
(three_byte_table): Use PREFIX_0F38DB..PREFIX_0F38DF and
PREFIX_0F3ADF.
(mod_table): Use VEX_C4_TABLE, VEX_C5_TABLE and VEX_LEN_TABLE.
Add MOD_VEX_XXX entries.
(ckprefix): Initialize rex_original and rex_ignored. Store the
REX byte in rex_original.
(get_valid_dis386): Handle the implicit prefix in VEX prefix
bytes and USE_VEX_LEN_TABLE/USE_VEX_C4_TABLE/USE_VEX_C5_TABLE.
(print_insn): Set need_vex/need_vex_reg/vex_i4_done to 0 before
calling get_valid_dis386. Use rex_original and rex_ignored when
printing out REX.
(putop): Handle "XY".
(intel_operand_size): Handle VEX, xmm_mode, xmmq_mode and
ymmq_mode.
(OP_E_extended): Updated to use OP_E_register and
OP_E_memory.
(OP_XMM): Handle VEX.
(OP_EX): Likewise.
(XMM_Fixup): Likewise.
(CMP_Fixup): Use ARRAY_SIZE.
* i386-gen.c (cpu_flag_init): Add CpuAES, CPU_CLMUL_FLAGS,
CPU_FMA_FLAGS and CPU_AVX_FLAGS.
(operand_type_init): Add OPERAND_TYPE_REGYMM and
OPERAND_TYPE_VEX_IMM4.
(cpu_flags): Add CpuAVX, CpuAES, CpuCLMUL and CpuFMA.
(opcode_modifiers): Add Implicit1stXmm0, Vex, Vex256, VexNDD,
VexNDS, VexW0, VexW1, Vex0F, Vex0F38, Vex0F3A, Vex3Sources,
VexImmExt and SSE2AVX.
(operand_types): Add RegYMM, Ymmword and Vex_Imm4.
* i386-opc.h (CpuAVX): New.
(CpuAES): Likewise.
(CpuCLMUL): Likewise.
(CpuFMA): Likewise.
(Vex): Likewise.
(Vex256): Likewise.
(VexNDS): Likewise.
(VexNDD): Likewise.
(VexW0): Likewise.
(VexW1): Likewise.
(Vex0F): Likewise.
(Vex0F38): Likewise.
(Vex0F3A): Likewise.
(Vex3Sources): Likewise.
(VexImmExt): Likewise.
(SSE2AVX): Likewise.
(RegYMM): Likewise.
(Ymmword): Likewise.
(Vex_Imm4): Likewise.
(Implicit1stXmm0): Likewise.
(CpuXsave): Updated.
(CpuLM): Likewise.
(ByteOkIntel): Likewise.
(OldGcc): Likewise.
(Control): Likewise.
(Unspecified): Likewise.
(OTMax): Likewise.
(i386_cpu_flags): Add cpuavx, cpuaes, cpuclmul and cpufma.
(i386_opcode_modifier): Add implicit1stxmm0, vex, vex256,
vexnds, vexndd, vexw0, vexw1, vex0f, vex0f38, vex0f3a,
vex3sources, veximmext and sse2avx.
(i386_operand_type): Add regymm, ymmword and vex_imm4.
* i386-opc.tbl: Add AES, CLMUL, AVX and FMA new instructions.
* i386-reg.tbl: Add AVX registers, ymm0..ymm15.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2008-04-03 14:03:21 +00:00
2460c166ae
/gas:
...
2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Add attiny167.
* doc/c-avr.texi: Likewise.
/include:
2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* opcode/avr.h (AVR_ISA_TINY3): Define new opcode set for attiny167.
2008-03-28 21:51:38 +00:00
70881657a2
/gas:
...
2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Add atmega32u4.
* doc/c-avr.texi: Likewise.
2008-03-28 21:04:22 +00:00
25755480bf
/gas:
...
2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Add atmega32c1.
* doc/c-avr.texi: Likewise.
2008-03-28 19:24:52 +00:00
4641781c11
2008-03-28 Paul Brook <paul@codesourcery.com>
...
gas/
* config/tc-arm.c (parse_neon_mov): Parse register before immediate
to avoid spurious symbols.
2008-03-28 18:13:52 +00:00
025987eae0
* config/tc-m68k.c (md_convert_frag_1): Replace as_fatal with
...
as_bad_where.
2008-03-28 09:51:13 +00:00
38de72b9a0
* config/tc-avr.c (mcu_types): Add atmega32m1.
...
* doc/c-avr.texi: Likewise.
2008-03-27 14:52:35 +00:00
35997600fc
* config/tc-arm.c (do_neon_cvt): Move variable declarations to
...
start of block.
(do_neon_ext): Fix sign of comparison.
2008-03-27 14:12:15 +00:00
e2c038d34c
gas/:
...
* config/tc-bfin.c (bfin_start_line_hook): Localize the labels
generated for LOOP_BEGIN and LOOP_END instructions.
(bfin_gen_loop): Likewise.
gas/testsuite/:
* gas/bfin/flow.d: Adjust since the generated labels for LOOP_BEGIN
and LOOP_END instruction are local now.
* gas/bfin/flow2.d: Likewise.
2008-03-26 16:33:33 +00:00
Richard Sandiford
Nathan Sidwell
Adam Nemet
Carlos O'Donell
Alan Modra
Peter Bergner
Eric B. Weddington
Hans-Peter Nilsson
Nick Clifton
H.J. Lu
Paul Brook
Catherine Moore
Chao-ying Fu
Bob Wilson
David S. Miller
Mike Frysinger
Andrew Stubbs
Kaz Kojima
Bernd Schmidt