Since 1993-11-05 git commit c188b0bec3, bfd_check_format has failed
if any of the target object_p functions returns false with any error
but bfd_error_wrong_format. That's just weird. There is really no
reason why coff_real_object_p should be fixed to only return that
error instead of numerous other possible errors. Even an out of
memory condition for one target doesn't necessarily mean other targets
can't match, assuming the failing target nicely returns all memory it
might have used.
* format.c (bfd_check_format_matches): Ignore bfd_error on target
match failures. Don't init to bfd_error_wrong_format before
calling _bfd_check_format.
BFD is not supposed to exit or abort on anything the user can do.
* vms-alpha.c (_bfd_vms_push, _bfd_vms_pop): Return pass/fail
status rather than exiting on stack overflow or underflow.
(_bfd_vms_slurp_etir): Adjust to suit.
Fixes lots of places the fuzzers are going to find, and the one they
already hit.
* mach-o.c (bfd_mach_o_read_dylinker): Don't read past end of
command. Check name offset is within command.
(bfd_mach_o_read_dylib, bfd_mach_o_read_prebound_dylib),
(bfd_mach_o_read_prebind_cksum, bfd_mach_o_read_twolevel_hints),
(bfd_mach_o_read_fvmlib, bfd_mach_o_read_dysymtab),
(bfd_mach_o_read_symtab, bfd_mach_o_read_uuid),
(bfd_mach_o_read_linkedit, bfd_mach_o_read_str),
(bfd_mach_o_read_dyld_info, bfd_mach_o_read_version_min),
(bfd_mach_o_read_encryption_info, bfd_mach_o_read_source_version),
(bfd_mach_o_read_encryption_info_64, bfd_mach_o_read_main),
(bfd_mach_o_read_note, bfd_mach_o_read_build_version),
(bfd_mach_o_read_segment): Similarly.
(bfd_mach_o_read_thread): Properly bound check thread struct.
Don't repeat checks on second loop.
(bfd_mach_o_read_command): Fail on invalid command length.
It's a little tricky. We can release any memory back when we have a
match failure, but after a match success which we might want to
preserve for later use the high water mark must change to that of the
matched bfd.
* format.c (bfd_check_format_matches): Add preserve_match.
Save initial bfd state in "preserve", matched bfd state in
"preserve_match". Save just the first match. Release
bfd_alloc memory. Restore and finish preserved state as
appropriate on all function exit paths.
object_p functions cannot allocate memory by malloc and not free it
before returning. Even a successful target match may not be the best
match. If a match isn't used then those malloc'd blocks won't be
freed.
* coffgen.c (coff_real_object_p): Free malloc'd memory on target
match too.
PR 25307
(bfd_pef_parse_function_stubs): Correct the test that ensures that
there is enough data remaining in the code buffer before
attempting to read a function stub.
ld/PR25316
* elfnn-ia64.c (elfNN_ia64_merge_private_bfd_data): don't fail
on binary inputs ld/PR25316.
(is_ia64_elf): new helper to filter on ia64 objects.
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
This fixes PR 25210 by specifying the the correct ELF class for AArch64 stubs.
After doing this the stub section starts behaving like a normal object file
loaded from disk. That is SEC_LINKER_CREATED causes us to have to write the
section manually.
This flag was added as a fix for PR 24753. I believe that
fix to still be correct as linker created sections don't have a size on disk
and it fixes the Arm bootstrap regression. But in this case specifying the
correct section class also makes the stub section not be considered by
compress.c.
So I'm partially revert this change so that we don't have to manage the section
manually as implied by SEC_LINKER_CREATED.
bfd/ChangeLog:
PR 25210
PR 24753
* elfnn-aarch64.c (_bfd_aarch64_create_stub_section): Set ELF class.
ld/ChangeLog:
PR 25210
PR 24753
* emultempl/aarch64elf.em (elf${ELFSIZE}_aarch64_add_stub_section):
Remove SEC_LINKER_CREATED.
* testsuite/ld-aarch64/aarch64-elf.exp: Add erratum835769-843419.
* testsuite/ld-aarch64/erratum835769-843419.d: New test.
This fixes yet more errors in the alpha-vms buffer size checks.
* vms-alpha.c (_bfd_vms_slurp_eisd): Don't overflow when checking
offset. Don't overflow when checking rec_size, and do allow
rec_size to the end of the buffer. Ensure eisd->type can be
accessed, not just the first 32 bytes. Don't call
_bfd_vms_save_counted_string with zero length remaining. Fail
on empty string section name.
(_bfd_vms_slurp_egsd): Formatting. Catch more reads past end
of record size. Correct remaining length calculation. Fail
on empty string section name. Consolidate error paths.
Quite a few bfd_zalloc calls are wasting time clearing memory, and
should be bfd_alloc instead.
* archive.c (do_slurp_bsd_armap): Use bfd_alloc rather than
bfd_zalloc when memory is all written after the call.
(do_slurp_coff_armap): Likewise. Set bfd_error on ridiculously
large allocations that overflow bfd_size_type. Use just one
bfd_release on error exit.
(_bfd_slurp_extended_name_table): Use bfd_alloc for extended_names,
clear last byte rather than the entire array. Use bfd_alloc for
string table. Rearrange and simplify code copying file names.
* vms-alpha.c (_bfd_vms_slurp_egsd): Make base_addr a bfd_vma.
Limit alignment power. Correct and simplify alignment expression.
(evax_bfd_print_relocation_records): Avoid signed shift left.
Triggered by overflow of size calulation resulting in a too small
buffer. The testcase found one of the som_bfd_count_ar_symbols
problems.
* som.c (setup_sections): Don't overflow space_strings_size. Use
bfd_malloc2 to catch overflow of size calculation.
(som_prep_for_fixups): Use bfd_zalloc2 to catch overflow of size
calculation.
(som_build_and_write_symbol_table): Similarly use bfd_zmalloc2.
(som_slurp_symbol_table): Similarly use bfd_zmalloc2, bfd_malloc2,
and bfd_zalloc2.
(bfd_som_attach_aux_hdr): Use size_t vars for string length.
(som_bfd_count_ar_symbols): Use bfd_malloc2 to catch overflow of
size calculation. Use size_t vars for length and catch overflow.
(som_slurp_armap): Use bfd_alloc2 to catch overflow of size
calculation.
(som_bfd_ar_write_symbol_stuff): Similarly use bfd_zmalloc2 and
bfd_malloc2. Perform size calculations in bfd_size_type.
Two buffer overflows, and some over restrictive length checks.
* vms-alpha.c (add_symbol): Add "max" parameter. Error on string
length larger than max.
(_bfd_vms_slurp_egsd): Ensure record is at least large enough to
read string length byte, error if not. Pass size to add_symbol.
(_bfd_vms_slurp_etir): Don't read past end of buffer when reading
type and length. Allow read of last byte in buffer.
"count * 8 >= size" might overflow, "count >= size / 8" doesn't.
* coff-rs6000.c (_bfd_xcoff_slurp_armap): Don't overflow when
checking symbol count against section size. Guard against strlen
running off end of buffer by allocating one more byte and zeroing.
* coff64-rs6000.c (xcoff64_slurp_armap): Likewise.
This is fussing about nothing really but since I was looking at signed
vs. unsigned issues, I decided to use the correct types here.
* elf32-ppc.c (ppc_elf_get_synthetic_symtab): Use size_t for vars.
* elf64-ppc.c (sym_exists_at): Use size_t for lo, hi and mid.
PR 25237
* elf.c (assign_file_positions_for_load_sections): Attempt to
keep meaningless p_offset for PT_LOAD segments without file
contents within file size.
In Operand_soffsetx4_decode:
soffsetx4_0 = 0x4 + ((((int) offset_0 << 14) >> 14) << 2);
and other places.
Don't sign extend with shifts! This file also has many occurrences of
truncation via shifts, which aren't a problem due to using uint32, but
I dislike on principle enough to fix.
* xtensa-modules.c (Field_* functions): Don't mask using shifts.
(Operand_soffsetx4_decode, Operand_simm4_decode),
(Operand_simm8_decode, Operand_simm8x256_decode),
(Operand_simm12b_decode, Operand_label8_decode),
(Operand_label12_decode, Operand_soffset_decode),
(Operand_xt_wbr15_label_decode, Operand_xt_wbr18_label_decode): Don't
sign extend using shifts.
(Operand_immrx4_decode, Operand_uimm16x4_decode): Avoid UB in
constant.
Here, since val is signed:
*valuep = (val << scale);
* cpu-ia64-opc.c (ext_imms_scaled): Avoid undefined left shift
of negative values by using unsigned vars.
In cases where a relocatable object file has a common symbol, no other
file has a definition, and there is a matching common symbol found in
a shared library then ld will output a definition using the largest of
size and alignment for the commons. This patch fixes a bug in ld that
ignored common symbols when assigning versions, resulting in such
symbols being given VER_NDX_LOCAL versions.
PR 25236
* elflink.c (_bfd_elf_link_assign_sym_version): Assign versions
for ELF_COMMON_DEF_P symbols.
(elf_link_output_extsym, _bfd_elf_add_default_symbol): Adjust to
suit.
This bug was observed on nios2-linux-gnu with some C++ programs
linked with -pie or -shared. The nios2 ABI doesn't include appropriate
relocations in this instance and GCC is also being patched not to pass
--eh-frame-hdr to the linker in those cases.
2019-12-05 Sandra Loosemore <sandra@codesourcery.com>
bfd/
* elf-eh-frame.c (_bfd_elf_discard_section_eh_frame): Make
FDE encoding warning conditional.
This patch remedies the following DW_FORM_GNU_ref_alt related problem:
/* FIXME: Do we need to locate the correct CU, in a similar
fashion to the code in the DW_FORM_ref_addr case above ? */
Without the correct CU the wrong abbrevs are used, resulting in
errors and/or wrong file names.
There is scope for further work here. Parsing of CUs should be a two
step process, with the first stage just finding the bounds of the CU.
This would allow find_abstract_instance to quickly find the CU
referenced by DW_FORM_ref_addr or DW_FORM_GNU_ref_alt, then take the
second stage of CU parsing where abbrevs, ranges and suchlike consume
time and memory. As it is, we just process CUs from the start of
.debug_info until we find the one of interest. The testcase in the PR
takes 98G of virtual memory.
PR 25230
* dwarf2.c (struct dwarf2_debug_file): Add line_table and
abbrev_offsets.
(struct abbrev_offset_entry): New.
(hash_abbrev, eq_abbrev, del_abbrev): New functions.
(read_abbrevs): Check whether we have already read abbrevs at
given offset, and add new offset/abbrev to hash table.
(decode_line_info): Keep line table at offset zero in file struct.
Return this for a cu reusing the same dir/file list.
(find_abstract_instance): Find cu for DW_FORM_GNU_ref_alt.
(_bfd_dwarf2_slurp_debug_info): Create offset/abbrev hash tables.
(_bfd_dwarf2_cleanup_debug_info): Adjust deletion of lines and
abbrevs.
read_section does offset checking, reporting an error on out of
bounds. There's no need to duplicate the check in functions calling
read_section. Also, I spotted a place where a pointer difference
expression was being cast to unsigned int, possibly truncating
relevant bits on a 64-bit host.
* dwarf2.c (read_indirect_string): Don't duplicate offset check
done in read_section.
(read_indirect_line_string): Likewise.
(read_alt_indirect_string): Likewise.
(read_alt_indirect_ref): Likewise.
(read_abbrevs): Likewise. Free memory on all failure paths.
Use correct unsigned type for pointer difference comparison.
These are unused. Remove them. Also fix the wrong sort of 0 being
returned from read_alt_indirect_ref.
* dwarf2.c (struct dwarf2_debug): Update comments. Remove sec
and sec_info_ptr.
(_bfd_dwarf2_slurp_debug_info): Don't set sec or sec_info_ptr.
(stash_comp_unit): Likewise.
(read_alt_indirect_ref): Return NULL not FALSE.
There were a number of problems with the previous patch. Firstly,
_bfd_dwarf2_stash_syms didn't do anything when the original file had
dynamic symbols, and secondly, info found by the symbol search didn't
make it out of _bfd_elf_find_nearest_line except in the case of DWARF
functions without external linkage.
PR 23652
* dwarf2.c (_bfd_dwarf2_stash_syms): Break out of loop on finding
matching section.
(_bfd_dwarf2_find_nearest_line): Return an int, with value 2 when
returning info from the symbol table. Do the _bfd_elf_find_function
search also when !found. Call _bfd_dwarf2_stash_syms regardless of
symbols.
* elf64-alpha.c (elf64_alpha_find_nearest_line): Accept dwarf2
result of 1 only.
* elfxx-mips.c (_bfd_mips_elf_find_nearest_line): Likewise.
* libbfd-in.h (_bfd_dwarf2_find_nearest_line): Update prototype.
* libbfd.h: Regenerate.
Sometimes DWARF info for a function is incomplete, and the function
can be retrieved by examining symbols. However, when separate debug
files are used it may be that the original file is completely
stripped of symbols. This patch teaches BFD to look at symbols from
the debug file in that case.
The patch also removes arm_elf_find_function, instead implementing
elf_backend_maybe_function_sym. arm_elf_find_function was written
before the generic _bfd_elf_find_function called maybe_function_sym.
aarch64 copied arm, so that file gets the same treatment. There is
some chance this will speed up arm and aarch64 lookup of function/line.
PR 23652
* dwarf2.c (_bfd_dwarf2_stash_syms): New function.
(_bfd_dwarf2_find_nearest_line): Use it here, passing syms to
_bfd_elf_find_function. Call _bfd_elf_find_function in cases
where _bfd_elf_find_nearest_line would do so.
* elf.c (_bfd_elf_find_nearest_line): Omit _bfd_elf_find_function
for dwarf2.
* elfxx-mips.c (_bfd_mips_elf_find_nearest_line): Similarly. Tidy.
* elf32-arm.c (elf32_arm_maybe_function_sym): New function.
(elf_backend_maybe_function_sym): Define.
(arm_elf_find_function, elf32_arm_find_nearest_line): Delete.
(bfd_elf32_find_nearest_line): Don't define.
* elfnn-aarch64.c (elfNN_aarch64_maybe_function_sym): New function.
(elf_backend_maybe_function_sym): Define.
(aarch64_elf_find_function, elfNN_aarch64_find_nearest_line): Delete.
(bfd_elfNN_find_nearest_line): Don't define.
Using bfd_vma for insn is to avoid having to worry about sign
propagation in expressions involving insn and sym_value when bfd_vma
is not the same as unsigned long.
* elf32-sh.c (sh_reloc): Use a bfd_vma insn.
(sh_reloc <R_SH_IND12W>): Divide calculated relocation value
by two before applying to insn. Correct overflow test.
* coff-sh.c (sh_reloc): Likewise.
and other tidies. I think it's better to default to passing the
section to bfd_octets_per_byte, even in cases where we know it won't
make a difference.
A number of the coff reloc functions used bfd_octets_per_byte wrongly,
not factoring it into the offset into the data buffer. As it happens,
the targets using those files always had bfd_octets_per_byte equal to
one, so there wasn't any detectable wrong behaviour. However, it is
wrong in the source and might cause trouble for anyone creating a new
target. Besides fixing that, the patch also defines OCTETS_PER_BYTE
as one in target files where that is appropriate.
bfd/
* archures.c (bfd_octets_per_byte): Tail call
bfd_arch_mach_octets_per_byte.
* coff-arm.c (OCTETS_PER_BYTE): Define.
(coff_arm_reloc): Introduce new "octets" temp. Use OCTETS_PER_BYTE
with section. Correct "addr". Remove ATTRIBUTE_UNUSED.
* coff-i386.c (coff_i386_reloc): Similarly.
* coff-mips.c (mips_reflo_reloc): Similarly.
* coff-x86_64.c (coff_amd64_reloc): Similarly.
* elf32-msp430.c (OCTETS_PER_BYTE): Define.
(rl78_sym_diff_handler): Use OCTETS_PER_BYTE, with section.
* elf32-nds32.c (nds32_elf_get_relocated_section_contents): Similarly.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): Similarly.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Similarly.
* elf32-s12z.c (opru18_reloc): Similarly.
* elf32-sh.c (sh_elf_reloc): Similarly.
* elf32-spu.c (spu_elf_rel9): Similarly.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): Similarly.
* elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc),
(ppc64_elf_toc64_reloc): Similarly.
* bfd.c (bfd_get_section_limit): Pass section to bfd_octets_per_byte.
* cofflink.c (_bfd_coff_link_input_bfd),
(_bfd_coff_reloc_link_order): Likewise.
* elf.c (_bfd_elf_section_offset): Likewise.
* elflink.c (resolve_section, bfd_elf_perform_complex_relocation),
(elf_link_input_bfd, elf_reloc_link_order, elf_fixup_link_order),
(bfd_elf_final_link): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Don't strncmp twice
to set SEC_ELF_OCTETS.
* reloc.c (bfd_perform_relocation): Tidy SEC_ELF_OCTETS special case.
(bfd_install_relocation): Likewise.
(_bfd_final_link_relocate): Don't recalculate octets.
* syms.c (_bfd_stab_section_find_nearest_line): Introduc new
"octets" temp.
* bfd-in2.h: Regenerate.
ld/
* ldexp.c (fold_name): Pass section to bfd_octets_per_byte.
* ldlang.c (init_opb): Don't call bfd_arch_mach_octets_per_byte
unnecessarily.
All symbols, sizes and relocations in this section are octets instead of
bytes. Required for DWARF debug sections as DWARF information is
organized in octets, not bytes.
bfd/
* section.c (struct bfd_section): New flag SEC_ELF_OCTETS.
* archures.c (bfd_octets_per_byte): New parameter sec.
If section is not NULL and SEC_ELF_OCTETS is set, one octet es
returned [ELF targets only].
* bfd.c (bfd_get_section_limit): Provide section parameter to
bfd_octets_per_byte.
* bfd-in2.h: regenerate.
* binary.c (binary_set_section_contents): Move call to
bfd_octets_per_byte into section loop. Provide section parameter
to bfd_octets_per_byte.
* coff-arm.c (coff_arm_reloc): Provide section parameter
to bfd_octets_per_byte.
* coff-i386.c (coff_i386_reloc): likewise.
* coff-mips.c (mips_reflo_reloc): likewise.
* coff-x86_64.c (coff_amd64_reloc): likewise.
* cofflink.c (_bfd_coff_link_input_bfd): likewise.
(_bfd_coff_reloc_link_order): likewise.
* elf.c (_bfd_elf_section_offset): likewise.
(_bfd_elf_make_section_from_shdr): likewise.
Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes,
.debug*, .zdebug* and .note.gnu*.
* elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter
to bfd_octets_per_byte.
* elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise.
* elf32-s12z.c (opru18_reloc): likewise.
* elf32-sh.c (sh_elf_reloc): likewise.
* elf32-spu.c (spu_elf_rel9): likewise.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise
* elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise.
(ppc64_elf_addr16_ha_reloc): likewise.
(ppc64_elf_toc64_reloc): likewise.
* elflink.c (bfd_elf_final_link): likewise.
(bfd_elf_perform_complex_relocation): likewise.
(elf_fixup_link_order): likewise.
(elf_link_input_bfd): likewise.
(elf_link_sort_relocs): likewise.
(elf_reloc_link_order): likewise.
(resolve_section): likewise.
* linker.c (_bfd_generic_reloc_link_order): likewise.
(bfd_generic_define_common_symbol): likewise.
(default_data_link_order): likewise.
(default_indirect_link_order): likewise.
* srec.c (srec_set_section_contents): likewise.
(srec_write_section): likewise.
* syms.c (_bfd_stab_section_find_nearest_line): likewise.
* reloc.c (_bfd_final_link_relocate): likewise.
(bfd_generic_get_relocated_section_contents): likewise.
(bfd_install_relocation): likewise.
For section which have SEC_ELF_OCTETS set, multiply output_base
and output_offset with bfd_octets_per_byte.
(bfd_perform_relocation): likewise.
include/
* coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN),
(PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls.
binutils/
* objdump.c (disassemble_data): Provide section parameter to
bfd_octets_per_byte.
(dump_section): likewise
(dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set.
gas/
* as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF.
* dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for
.debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str
and .debug_ranges sections.
* write.c (maybe_generate_build_notes): Set section flag
SEC_OCTETS for .gnu.build.attributes section.
* frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if
SEC_OCTETS is set.
* symbols.c (resolve_symbol_value): Likewise.
ld/
* ldexp.c (fold_name): Provide section parameter to
bfd_octets_per_byte.
* ldlang (init_opb): New argument s. Set opb_shift to 0 if
SEC_ELF_OCTETS for the current section is set.
(print_input_section): Pass current section to init_opb.
(print_data_statement,print_reloc_statement,
print_padding_statement): Likewise.
(lang_check_section_addresses): Call init_opb for each
section.
(lang_size_sections_1,lang_size_sections_1,
lang_do_assignments_1): Likewise.
(lang_process): Pass NULL to init_opb.
This code in elf_link_add_object_symbols:
ret = elf_add_dt_needed_tag (abfd, info, soname, add_needed);
if (ret < 0)
goto error_return;
/* If we have already included this dynamic object in the
link, just ignore it. There is no reason to include a
particular dynamic object more than once. */
if (ret > 0)
return TRUE;
prevents a shared library from being loaded twice by ensuring that any
library soname doesn't match the soname of one already loaded. This
happens before sym_hashes are allocated, which leaves sym_hashes NULL.
cmse_scan looks at library symbols, and when attempting to look up a
global symbol will segfault if sym_hashes is zero.
* elf32-arm.c (elf32_arm_size_stubs): Exclude dynamic library
BFDs that have not been loaded.
The testcase in this PR triggered "BFD_ASSERT (p2->is_sym)" by
sneakily generating a C_FILE sym whose value pointed into auxents.
The fix then is in the last changed line of this patch, to check
p->is_sym as well as p->u.syment.n_sclass. The other changes fix
various overflow checks that weren't as solid as they could be.
PR 25197
* coffgen.c (coff_find_nearest_line_with_names): Check that C_FILE
u.syment.n_value does point at another C_FILE sym and not into
some auxent that happens to look like a C_FILE. Properly check
for integer overflow and avoid possible pointer wrap-around.
Simplify pr17512 checks.
This patch renames elf_backend_modify_program_headers and moves the
elf.c code tweaking the ELF file header for -pie -Ttext-segment to a
new function, _bfd_elf_modify_headers, which then becomes the default
elf_backed_modify_headers and is called from any other target
elf_backed_modify_headers.
* elf-bfd.h (struct elf_backend_data <elf_backend_modify_headers>):
Rename from elf_backend_modify_program_headers.
(_bfd_elf_modify_headers): Declare.
* elf.c (assign_file_positions_except_relocs): Set
elf_program_header_size. Always call elf_backend_modify_headers.
Extract code modifying file header..
(_bfd_elf_modify_headers): ..to here. New function.
* elf32-arm.c (elf_backend_modify_headers): Renamed from
elf_backend_modify_program_headers.
* elf32-i386.c: Similarly.
* elf64-x86-64.c: Similarly.
* elfxx-target.h: Similarly. Default elf_backend_modify_headers
to _bfd_elf_modify_headers.
* elf-nacl.h (nacl_modify_headers): Rename from
nacl_modify_program_headers.
* elf-nacl.c (nacl_modify_headers): Rename from
nacl_modify_program_headers and call _bfd_elf_modify_headers.
* elf32-rx.c (elf32_rx_modify_headers): Similarly.
* elf32-spu.c (spu_elf_modify_headers): Similarly.
* elfnn-ia64.c (elfNN_ia64_modify_headers): Similarly.
* elf32-sh.c (elf_backend_modify_program_headers): Don't undef.
This patch introduces a new "sorry, cannot handle this file" bfd error
status. The idea is to use this error in cases where bfd hasn't found
a bfd_bad_value error, ie. an input file or set of options that are
invalid, but rather an input file that is simply too difficult to
process. Typically this might happen with fuzzed object files such as
the one in the PR, a wildly improbable core file. Some things are
just not worth wasting time over to fix "properly".
PR 25196
* bfd.c (bfd_error_type): Add bfd_error_sorry.
(bfd_errmsgs): Likewise.
* elf.c (rewrite_elf_program_header): Don't abort on confused
lma/alignment. Replace bfd_error_bad_value with bfd_error_sorry.
(_bfd_elf_validate_reloc): Use bfd_error_sorry.
(_bfd_elf_final_write_processing): Likewise.
* bfd-in2.h: Regenerate.
Make _bfd_riscv_relax_call handle section alignment padding same as
the _bfd_riscv_relax_lui and _bfd_riscv_relax_pc functions already
do. Use the max section alignment if section boundaries are crossed,
otherwise the alignment of the containing section.
bfd/
PR 25181
* elfnn-riscv.c (_bfd_riscv_relax_call): Always add max_alignment to
foff. If sym_sec->output_section and sec->output_section are the same
and not *ABS* then set max_alignment to that section's alignment.
ld/
PR 25181
* testsuite/ld-riscv-elf/call-relax-0.s: New file.
* testsuite/ld-riscv-elf/call-relax-1.s: New file.
* testsuite/ld-riscv-elf/call-relax-2.s: New file.
* testsuite/ld-riscv-elf/call-relax-3.s: New file.
* testsuite/ld-riscv-elf/call-relax.d: New test.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run call-relax test.
Change-Id: Iaf65cee52345abf1955f36e8e72c4f6cc0db8d9a
I think it is past time to remove CR16C support. CR16C was added in
2004, and only for ld. gas and binutils support is lacking, and there
have been no commits to bfd/elf32-cr16c.c other than warning fixes or
global maintainers making changes to all targets. I see no maintainer
listed for CR16C, and no commits from anyone at NSC supporting the
target. Furthermore, at the time the CR16 support was added in 2007,
config.sub was changed upstream to no longer recognise cr16c as a
valid cpu. That means the CR16C ld support is only available as a
secondary target by configuring with, for example,
--enable-targets=all or --enable-targets=cr16c-unknown-elf. No
testing of the CR16C target is possible.
include/
* elf/cr16c.h: Delete.
bfd/
* cpu-cr16c.c: Delete.
* elf32-cr16c.c: Delete.
* Makefile.am,
* archures.c,
* config.bfd,
* configure.ac,
* reloc.c,
* targets.c: Remove cr16c support.
* Makefile.in,
* bfd-in2.h,
* configure,
* libbfd.h,
* po/SRC-POTFILES.in: Regenerate.
ld/
* emulparams/elf32cr16c.sh: Delete.
* scripttempl/elf32cr16c.sc: Delete.
* Makefile.am,
* configure.tgt: Remove cr16c support.
* NEWS: Mention removal of cr16c.
* Makefile.in,
* po/BLD-POTFILES.in: Regenerate.
* doc/chew.c (add_to_definition): Use correct type when
calculating size of array reallocation.
(nextword): Always initialise the word return parameter.
(compile): Check return value of nextword().
* elf-bfd.h (elf_backend_data) <elf_backend_core_find_build_id>:
New field.
(_bfd_elf32_core_find_build_id, _bfd_elf64_core_find_build_id):
New functions.
(elf_read_notes): Add declaration.
* elf.c (elf_read_notes): Move elf-bfd.h.
(_bfd_elf_core_find_build_id): New function.
(bfd_section_from_phdr): Scan core file PT_LOAD segments for
build-id if none is known.
(elf_parse_notes): For core files, scan for notes.
* elfcore.h (elf_core_file_matches_executable_p): If both
BFDs have identical build-ids, then they match.
(_bfd_elf_core_find_build_id): New function.
* elfxx-target.h (elf_backend_core_find_build_id): Define.
(elfNN_bed): Add elf_backend_core_find_build_id.
* libcoff-in.h (struct pe_tdata): Add dos_message field.
* libcoff.h: Regenerate.
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Copy the
dos_message field rather than initialising it.
(_bfd_XX_bfd_copy_private_bfd_data_common): Copy the dos_message
field.
* peicode.h (pe_mkobject): Initialise the dos_message field.
(pe_mkobject_hook): Copy the dos_message field.
(pe_bfd_object_p): Copy the dos_message field.
This rewrites much of assign_file_positions_for_non_load_sections to
allow objcopy and strip to handle cases like that in PR4499 where
program headers were not in their usual position immediately after the
ELF file header, and PT_LOAD headers were not sorted by paddr.
PR 4499
include/
* elf/internal.h (struct elf_segment_map): Delete header_size.
Add no_sort_lma and idx.
bfd/
* elf-nacl.c (nacl_modify_segment_map): Set no_sort_lma for all
PT_LOAD segments.
* elf32-spu.c (spu_elf_modify_segment_map): Likewise on overlay
PT_LOAD segments.
* elf.c (elf_sort_segments): New function.
(assign_file_positions_except_relocs): Use shortcuts to elfheader
and elf_tdata. Seek to e_phoff not sizeof_ehdr to write program
headers. Move PT_PHDR check..
(assign_file_positions_for_non_load_sections): ..and code setting
PT_PHDR p_vaddr and p_paddr, and code setting __ehdr_start value..
(assign_file_positions_for_load_sections): ..to here. Sort
PT_LOAD headers. Delete header_pad code. Use actual number of
headers rather than allocated in calculating size for program
headers. Don't assume program headers follow ELF file header.
Simplify pt_load_count code. Only set "off" for PT_LOAD or
PT_NOTE in cores.
(rewrite_elf_program_header): Set p_vaddr_offset for segments
that include file and program headers.
(copy_elf_program_header): Likewise, replacing header_size code.
This patch extends "ar P" to allow creation of normal (as distinct
from thin) archives with full path names.
PR 452
PR 25104
bfd/
* archive.c (normalize): Return file unchanged when
BFD_ARCHIVE_FULL_PATH.
(_bfd_construct_extended_name_table): Pass abfd, the output
bfd, to normalize.
(_bfd_archive_bsd44_construct_extended_name_table): Likewise.
* bfd.c (struct bfd): Make flags a full flagword.
(BFD_ARCHIVE_FULL_PATH): Define.
* bfd-in2.h: Regenerate.
binutils/
* ar.c (write_archive): Set BFD_ARCHIVE_FULL_PATH.
* doc/binutils.texi (extract from archive): Mention
restrictions when extracting from archives with full paths.
(ar P): Update to current P support.
(ar -X32_64): Fix spelling.
This change increases the default alignment for the .plt section
from 4 bytes to 8 bytes. When function descriptors are 8-byte
aligned, they can be updated atomically on 32-bit hppa. This
helps with ordering issues on SMP machines. It also ensures
that descriptors reside on the same cache line. This reduces
the probability of a double TLB miss in a call.
2019-10-20 John David Anglin <danglin@gcc.gnu.org>
* elf32-hppa.c (elf32_hppa_size_dynamic_sections): Provide 8-byte
minimum alignment for .plt section.
This commit updates the import stubs to leave the pointer to the
function descriptor in register %r22. This provides a backup
mechanism for _dl_runtime_resolve to fixup descriptors during
lazy binding.
bfd/ChangeLog
2019-10-19 John David Anglin <danglin@gcc.gnu.org>
* elf32-hppa.c: Revise import stub sequences.
(LONG_BRANCH_STUB_SIZE): Define.
(LONG_BRANCH_SHARED_STUB_SIZE): Define.
(IMPORT_STUB_SIZE): Define.
(IMPORT_SHARED_STUB_SIZE): Define.
(EXPORT_STUB_SIZE): Define.
(plt_stub): Revise to not use register %r22.
(LDO_R1_R22): Define.
(LDW_R22_R21): Define.
(LDW_R22_R19): Define.
(hppa_build_one_stub): Update stub generation and use new defines.
(hppa_size_one_stub): Likewise.
Two patches from Nelson Chu.
It is better to use the linker's callback functions to handle the link time
error when relocating. The unresolved relocation error can be regarded as
an unsupported relocation. To make user easier to understand different errors,
we need to extend the current error message format of the callback function
since the format is fixed.
bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): Use asprintf to extend
the error message if needed, and then store the result into the
`msg_buf`. Finally, remember to free the unused `msg_buf`. All error
message for the dangerous relocation should be set before we call the
callback function. If we miss the error message since linker runs out
of memory, we should set the default error message for the error.
ld/
* testsuite/ld-riscv-elf/lib-nopic-01a.s: Create the shared library
lib-nopic-01a.so, it will be linked with lib-nopic-01b.s.
* testsuite/ld-riscv-elf/lib-nopic-01b.s: Add new test for the
unresolved relocation. Link the non-pic code into a shared library
may cause the error.
* testsuite/ld-riscv-elf/lib-nopic-01b.d: Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run the new test only when
the shared library is supported.
R_RISCV_CALL, R_RISCV_JAL and R_RISCV_RVC_JUMP are pc-relative relocation.
For now, we do not allow the object with these relocation links into a shared
library since the referenced symbols may be loaded to the places that too far
from the pc. We can improve the error message for these unsupported relocation
to notice user that they should recompile their code with `fPIC`.
bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): Report the error message
that user should recompile their code with `fPIC` when linking non-pic
code into shared library.
ld/
* testsuite/ld-riscv-elf/lib-nopic-01b.d: Update the error message.
Change-Id: Ib3347a0a6fa1c2b20a9647c314d5bec2c322ff04
This implements padding of orphan executable sections for PowerPC.
Of course, the simple implementation of bfd_arch_ppc_nop_fill and
removing the NOP definition didn't work, with powerpc64 hitting a
testsuite failure linking to S-records. That's because the srec
target is BFD_ENDIAN_UNKNOWN so the test of bfd_big_endian (abfd) in
default_data_link_order therefore returned false, resulting in a
little-endian nop pattern. The rest of the patch fixes that problem
by adding a new field to bfd_link_info that can be used to determine
actual endianness on targets like srec.
PR 13616
include/
* bfdlink.h (struct bfd_link_info <big_endian>): New field.
bfd/
* cpu-powerpc.c (bfd_arch_ppc_nop_fill): New function, use it
for all ppc arch info.
* linker.c (default_data_link_order): Pass info->big_endian to
arch_info->fill function.
ld/
* emulparams/elf64lppc.sh (NOP): Don't define.
* emulparams/elf64ppc.sh (NOP): Don't define.
* ldwrite.c (build_link_order): Use link_info.big_endian. Move
code determining endian to use for data_statement to..
* ldemul.c (after_open_default): ..here. Set link_info.big_endian.
* elf32-m68hc1x.c (reloc_warning): Add printf attribute.
(elf32_m68hc11_relocate_section): Don't use a variable for format
strings. Delete some unnecessary xgettext:c-format comments.
Also fixes m68hc1x printf arguments which would have bombed when
compiling on a 32-bit host with --enable-64-bit-bfd.
bfd/
PR 24955
* elf32-arm.c (set_cmse_veneer_addr_from_implib): Use bfd_malloc
rather than xmalloc.
* elf32-m68hc1x.c (reloc_warning): New function.
(elf32_m68hc11_relocate_section): Use it here. Cast bfd_vma values
corresponding to %lx in format strings.
* elf32-nds32.c (nds32_insertion_sort): Use a stack temporary.
gas/
* config/tc-nds32.c (nds32_set_section_relocs): Use relocs and n
parameters rather than equivalent sec->orelocation and
sec->reloc_count. Don't sort for n <= 1. Tidy.
This patch ensures qsort stability in line and function sorting done
in dwarf2.c. For the line sequences we make use of an existing field
that isn't used until later, as a monotonic counter for the qsort.
* dwarf2.c (struct lookup_funcinfo): Add idx field.
(compare_lookup_funcinfos): Perform final sort on idx.
(build_lookup_funcinfo_table): Set idx.
(compare_sequences): Perform final sort on num_lines.
(build_line_info_table): Set num_lines and line_info_lookup earlier.
(sort_line_sequences): Set num_lines for sort.
This particular sort almost certainly does not need to be stable for
the ELF linker to work correctly. However it is conceivable that an
unstable sort could affect linker output, and thus different output be
seen with differing qsort implementations. The argument goes like
this: Given more than one strong alias symbol of equal section, value,
and size, the aliases will compare equal by elf_sort_symbol and thus
which one is chosen as the "real" symbol to be made dynamic depends on
qsort. Why would anyone define two symbols at the same address?
Well, sometimes the fact that there are more than one strong alias
symbol is due to linker script symbols like __bss_start being made
dynamic. This will match the first symbol defined in .bss if it
doesn't have correct size, and forgetting to properly set size and
type of symbols isn't as rare as it should be.
This patch adds some more heuristics to elf_sort_symbol.
* elflink.c (elf_sort_symbol): Sort on type and name as well.
(elf_link_add_object_symbols): Style fix.
elf_sort_sections tried to ensure a stable qsort by using target_index
as the final comparison, but target_index hasn't been set by anything
at the time elf_sort_sections was run. This patch arrange to have
target_index set.
* elf.c (_bfd_elf_map_sections_to_segments): Init target_index
for sections about to be sorted.
(assign_file_positions_for_load_sections): Likewise.
(elf_sort_sections): Don't bother optimising both TOEND case.
* elflink.c (bfd_elf_final_link): Reset target_index.
The linker SHF_LINK_ORDER section sorting had a number of defects.
1) The ordering was by VMA, which won't work with overlays. LMA is
better.
2) Zero size sections can result in two sections at the same LMA/VMA.
When only one of the two sections at the same LMA is zero size,
that one must be first.
3) Warnings given by elf_get_linked_section_vma won't ever be emitted
since elf_object_p warns and excludes objects with zero sh_link on
a SHF_LINK_ORDER section.
4) Section offset was adjusted down rather than up by section
alignment, possibly creating overlapping sections.
5) Finding the linked section did so the hard way, rather than simply
using elf_linked_to_section.
* elflink.c (elf_get_linked_section_vma): Delete.
(compare_link_order): Use elf_linked_to_section and sort by lma,
size, and id.
(elf_fixup_link_order): Use size_t variables where appropriate.
Make use of elf_linked_to_section. Formatting. Properly align
sections.
qsort isn't guaranteed to be a stable sort, that is, elements
comparing equal according to the comparison function may be reordered
relative to their original ordering. Of course sometimes you may not
care, but even in those cases it is good to force some ordering
(ie. not have the comparison function return 0) so that linker output
is reproducible over different libc qsort implementations.
One way to make qsort stable (which the glibc manual incorrectly says
is the only way) is to augment the elements being sorted with a
monotonic counter of some kind, and use that counter as the final
arbiter of ordering in the comparison function.
Another way is to set up an array of pointers into the array of
elements, first pointer to first element, second pointer to second
element and so so, and sort the pointer array rather than the element
array. Final arbiter in the comparison function then is the pointer
difference. This works well with, for example, the symbol pointers
returned by _bfd_elf_canonicalize_symtab which point into a symbol
array.
This patch fixes a few places where sorting by symbol pointers is
appropriate, and adds comments where qsort stability is a non-issue.
* elf-strtab.c (strrevcmp): Comment.
* merge.c (strrevcmp): Likewise.
* elf64-ppc.c (compare_symbols): Correct final pointer comparison.
Comment on why comparing pointers ensures a stable sort.
* elflink.c (struct elf_symbol): Add void* to union.
(elf_sort_elf_symbol): Ensure a stable sort with pointer comparison.
(elf_sym_name_compare): Likewise.
(bfd_elf_match_symbols_in_sections): Style fix.
(elf_link_sort_cmp1): Comment.
stash_maybe_enable_info_hash_tables sets
stash->info_hash_status = STASH_INFO_HASH_ON;
regardless of the result of stash_maybe_update_info_hash_tables call. In
case it fails this results in repeated invocation of comp_unit_hash_info
for the same comp unit and assertion failure in this function.
Only set stash->info_hash_status = STASH_INFO_HASH_ON; when
stash_maybe_update_info_hash_tables is successful.
bfd/
2019-10-11 Max Filippov <jcmvbkbc@gmail.com>
* dwarf2.c (stash_maybe_enable_info_hash_tables): Only set
stash->info_hash_status = STASH_INFO_HASH_ON when
stash_maybe_update_info_hash_tables succeeds.
Evil testcase with two debug info sections, with sizes of 2aaaabac4ec1
and ffffd5555453b140 result in a total size of 1. Reading the first
section of course overflows the buffer and tramples on other memory.
PR 25070
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Catch overflow of
total_size calculation.
This functionality will generate a new GNU object attribute for the "data region"
has been added. This object attribute is used
mark whether the compiler has generated code assuming that data could be in the
upper or lower memory regions.
Code which assumes data is always in the lower memory region is incompatible
with code which uses the full memory range for data.
The patch also adds a new assembler directive ".mspabi_attribute" to handle the
existing MSPABI object attributes. GCC will now emit both .gnu_attribute and
.mspabi_attribute directives to indicate what options the source file was
compiled with.
The assembler will now check the values set in these directives against the
options that the it has been invoked with. If there is a discrepancy, the
assembler will exit with an error.
bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to..
(elf32_msp430_merge_msp430_attributes): Add support for merging the GNU
object attribute for data region.
binutils* readelf.c (display_msp430_gnu_attribute): New.
(process_arch_specific): Use msp430 specific handler for GNU
attributes.
gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to
FALSE if the data region is set to "upper", "either" or "none".
(msp430_object_attribute): New.
(md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute.
(msp430_md_end): Replace hard-coded attribute values with enums.
Handle data region object attribute.
* doc/as.texi: Document MSP430 Data Region object attribute.
* doc/c-msp430.texi: Document the .mspabi_attribute directive.
* testsuite/gas/msp430/attr-430-small-bad.d: New test.
* testsuite/gas/msp430/attr-430-small-bad.l: New test.
* testsuite/gas/msp430/attr-430-small-good.d: New test.
* testsuite/gas/msp430/attr-430-small.s: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-any-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-any.s: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-lower-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower.s: New test.
* testsuite/gas/msp430/msp430.exp: Run new tests.
include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names
and values.
ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-obj.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
A bug crept into commit f749f26eea, which could cause linker
segfaults when creating PIEs. This patch fixes it.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Do allocate
space for local got non-tls relocs when PIE.
This patch is a result of noticing messages like the following:
tmpdir/tls32.o: in function `_start':
(.text+0x1c): unresolvable R_PPC_REL24 relocation against symbol `__tls_get_addr_opt'
./ld-new: final link failed: symbol needs debug section which does not exist
The "needs debug section" comes from attempting to use debug info to
find source line information to print the first error message. That
error isn't of interest to the user, and any previous bfd_error value
which might be of interest is overwritten. So save and restore
bfd_error around the fancy error reporting code.
That still doesn't leave us with a clean bfd_error. Now we get
./ld-new: final link failed: nonrepresentable section on output
An unresolvable relocation surely doesn't mean there is some bfd
section that ld doesn't know how to output! Digging into that showed
a _bfd_elf_section_from_bfd_section failure attempting to find an elf
section correcsponding to ".interp". So don't go looking for elf
sections on linker created bfd sections.
And then fix the linker testsuite which expected the bogus message..
bfd/
* elflink.c (elf_fixup_link_order): Don't attempt to find
an elf_section for linker created bfd sections.
ld/
* ldmisc.c (vfinfo): Save and restore bfd_error around bfd
function calls that might set it.
* testsuite/ld-elf/indirect.exp: Don't expect "nonrepresentable
section" message.
ppc*_elf_tls_optimize decrements the PLT refcount for __tls_get_addr
when a GD or LD sequence can be optimized. Without tls marker relocs
this must be done when processing the argument setup relocations.
With marker relocs it's better done when processing the marker reloc.
But don't count them both ways.
Seen as "unresolvable R_PPC_REL24 relocation against symbol
`__tls_get_addr_opt'" (and other branch relocs).
* elf32-ppc.c (ppc_elf_tls_optimize): Don't process R_PPC_TLSLD
with non-local symbol. Don't double count __tls_get_addr calls
with marker relocs.
* elf64-ppc.c (ppc64_elf_tls_optimize): Likewise.
has_tls_get_addr_call is no longer named correctly as the flag is
only set on finding a __tls_get_addr call without tlsld/tlsgd marker
relocations.
* elf32-ppc.c (nomark_tls_get_addr): Rename from has_tls_get_addr_call
throughout.
* elf64-ppc.c (nomark_tls_get_addr): Likewise.
1) GOT entries generated for any of the GOT TLS relocations don't need
dynamic relocations for locally defined symbols in PIEs. In the case
of a tls_index doubleword, the dtpmod entry is known to be 1, and the
dtprel entry is also known at link time and relative. Similarly,
dtprel and tprel words are known at link time and relative. (GOT
entries for other than TLS symbols are not relative and thus need
dynamic relocations in PIEs.)
2) Local dynamic TLS code is really only meant for accesses local to
the current binary. There was a cheapskate test for this before using
the common tlsld_got slot, but the test wasn't exactly correct and
might confuse anyone looking at the code. The proper test,
SYMBOL_REFERENCES_LOCAL isn't so expensive that it should be avoided.
3) The same cheap test for local syms when optimising TLS sequences
should be SYMBOL_REFERENCES_LOCAL too.
bfd/
* elf64-ppc.c (ppc64_elf_check_relocs): Move initialisation of vars.
(ppc64_elf_tls_optimize): Correct is_local condition.
(allocate_got): Don't reserve dynamic relocations for any of the
tls got relocs in PIEs when the symbol is local.
(allocate_dynrelocs): Correct validity test for local sym using
tlsld_got slot.
(ppc64_elf_size_dynamic_sections): Don't reserve dynamic relocations
for any of the tls got relocs in PIEs.
(ppc64_elf_layout_multitoc): Likewise.
(ppc64_elf_relocate_section): Correct validity test for local sym
using tlsld_got slot. Don't emit dynamic relocations for any of
the tls got relocs in PIEs when the symbol is local.
* elf32-ppc.c (ppc_elf_tls_optimize): Correct is_local condition.
(got_relocs_needed): Delete.
(allocate_dynrelocs): Correct validity test for local sym using
tlsld_got slot. Don't reserve dynamic relocations for any of the
tls got relocs in PIEs when the symbol is local.
(ppc_elf_size_dynamic_sections): Don't reserve dynamic relocations
for any of the tls got relocs in PIEs.
(ppc_elf_relocate_section): Correct validity test for local sym
using tlsld_got slot. Don't emit dynamic relocations for any of
the tls got relocs in PIEs when the symbol is local.
ld/
* testsuite/ld-powerpc/tlsso.d: Adjust to suit tlsld_got usage change.
* testsuite/ld-powerpc/tlsso.g: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlsso32.d: Likewise.
* testsuite/ld-powerpc/tlsso32.g: Likewise.
* testsuite/ld-powerpc/tlsso32.r: Likewise.
Dynamic relocs are only needed in an executable for TLS symbols if
those are defined in an external module and even then TLS access
can be relaxed to use IE model instead of GD.
Several bfd_link_pic checks are turned into bfd_link_dll checks
to fix TLS handling in PIE, for the same fix some other targets
used !bfd_link_executable checks, but that includes relocatable
objects so dll seems safer (in most cases either should work, since
dynamic relocations are not applied in relocatable objects).
On arm* fixes
FAIL: Build pr22263-1
bfd/
PR ld/22263
PR ld/25056
* elf32-arm.c (elf32_arm_tls_transition): Use bfd_link_dll instead of
bfd_link_pic for TLS checks.
(elf32_arm_final_link_relocate): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
On 64-bit host the 32-bit addend was loaded without sign extension into
an unsigned long.
bfd/ChangeLog:
PR ld/25062
* elf32-arm.c (elf32_arm_final_link_relocate): Sign extend data.
ld/ChangeLog:
PR ld/25062
* testsuite/ld-arm/arm-elf.exp: Update.
* testsuite/ld-arm/tls-gdesc-neg.d: New test.
* testsuite/ld-arm/tls-gdesc-neg.s: New test.
This is quite complicated because the CTF section's contents depend on
the final contents of the symtab and strtab, because it has two sections
whose contents are shuffled to be in 1:1 correspondence with the symtab,
and an internal strtab that gets deduplicated against the ELF strtab
(with offsets adjusted to point into the ELF strtab instead). It is
also compressed if large enough, so its size depends on its contents!
So we cannot construct it as early as most sections: we cannot even
*begin* construction until after the symtab and strtab are finalized.
Thankfully there is already one section treated similarly: compressed
debugging sections: the only differences are that compressed debugging
sections have extra handling to deal with their changing name if
compressed (CTF sections are always called ".ctf" for now, though we
have reserved ".ctf.*" against future use), and that compressed
debugging sections have previously-uncompressed content which has to be
stashed away for later compression, while CTF sections have no content
at all until we generate it (very late).
BFD also cannot do the link itself: libctf knows how to do it, and BFD
cannot call libctf directly because libctf already depends on bfd for
file I/O. So we have to use a pair of callbacks, one, examine_strtab,
which allows a caller to examine the symtab and strtab after
finalization (called from elf_link_swap_symbols_out(), right before the
symtabs are written, and after the strtab has been finalized), and one
which actually does the emission (called emit_ctf simply because it is
grouped with a bunch of section-specific late-emission function calls at
the bottom of bfd_elf_final_link, and a section-specific name seems best
for that). emit_ctf is actually called *twice*: once from lang_process
if the emulation suggests that this bfd target does not examine the
symtab or strtab, and once via a bfd callback if it does. (This means
that non-ELF targets still get CTF emitted, even though the late CTF
emission stage is never called for them).
v2: merged with non-ELF support patch: slight commit message
adjustments.
v3: do not spend time merging CTF, or crash, if the CTF section is
explicitly discarded. Do not try to merge or compress CTF unless
linking.
v4: add CTF_COMPRESSION_THRESHOLD. Annul the freed input ctf_file_t's
after writeout: set SEC_IN_MEMORY on the output contents so a future
bfd enhancement knows it could free it. Add SEC_LINKER_CREATED |
SEC_KEEP to avoid having to add .ctf to the linker script. Drop
now-unnecessary ldlang.h-level elf-bfd.h include and hackery around
it. Adapt to elf32.em->elf.em and elf-generic.em->ldelf*.c
changes.
v5: fix tabdamage. Drop #inclusions in .h files: include in .c files,
.em files, and use struct forwards instead. Use bfd_section_is_ctf
inline function rather than SECTION_IS_CTF macro. Move a few
comments.
* Makefile.def (dependencies): all-ld depends on all-libctf.
* Makefile.in: Regenerated.
include/
* bfdlink.h (elf_strtab_hash): New forward.
(elf_sym_strtab): Likewise.
(struct bfd_link_callbacks <examine_strtab>): New.
(struct bfd_link_callbacks <emit_ctf>): Likewise.
bfd/
* elf-bfd.h (bfd_section_is_ctf): New inline function.
* elf.c (special_sections_c): Add ".ctf".
(assign_file_positions_for_non_load_sections): Note that
compressed debugging sections etc are not assigned here. Treat
CTF sections like SEC_ELF_COMPRESS sections when is_linker_output:
sh_offset -1.
(assign_file_positions_except_relocs): Likewise.
(find_section_in_list): Note that debugging and CTF sections, as
well as reloc sections, are assigned later.
(_bfd_elf_assign_file_positions_for_non_load): CTF sections get
their size and contents updated.
(_bfd_elf_set_section_contents): Skip CTF sections: unlike
compressed sections, they have no uncompressed content to copy at
this stage.
* elflink.c (elf_link_swap_symbols_out): Call the examine_strtab
callback right before the strtab is written out.
(bfd_elf_final_link): Don't cache the section contents of CTF
sections: they are not populated yet. Call the emit_ctf callback
right at the end, after all the symbols and strings are flushed
out.
ld/
* ldlang.h: (struct lang_input_statement_struct): Add the_ctf.
(struct elf_sym_strtab): Add forward.
(struct elf_strtab_hash): Likewise.
(ldlang_ctf_apply_strsym): Declare.
(ldlang_write_ctf_late): Likewise.
* ldemul.h (ldemul_emit_ctf_early): New.
(ldemul_examine_strtab_for_ctf): Likewise.
(ld_emulation_xfer_type) <emit_ctf_early>: Likewise.
(ld_emulation_xfer_type) <examine_strtab_for_ctf>: Likewise.
* ldemul.c (ldemul_emit_ctf_early): New.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldlang.c: Include ctf-api.h.
(CTF_COMPRESSION_THRESHOLD): New.
(ctf_output): New. Initialized in...
(ldlang_open_ctf): ... this new function. Open all the CTF
sections in the input files: mark them non-loaded and empty
so as not to copy their contents to the output, but linker-created
so the section gets created in the target.
(ldlang_merge_ctf): New, merge types via ctf_link_add_ctf and
ctf_link.
(ldlang_ctf_apply_strsym): New, an examine_strtab callback: wrap
ldemul_examine_strtab_for_ctf.
(lang_write_ctf): New, write out the CTF section.
(ldlang_write_ctf_late): New, late call via bfd's emit_ctf hook.
(lang_process): Call ldlang_open_ctf, ldlang_merge_ctf, and
lang_write_ctf.
* ldmain.c (link_callbacks): Add ldlang_ctf_apply_strsym,
ldlang_write_ctf_late.
* emultempl/aix.em: Add ctf-api.h.
* emultempl/armcoff.em: Likewise.
* emultempl/beos.em: Likewise.
* emultempl/elf.em: Likewise.
* emultempl/generic.em: Likewise.
* emultempl/linux.em: Likewise.
* emultempl/msp430.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ticoff.em: Likewise.
* emultempl/vanilla.em: Likewise.
* ldcref.c: Likewise.
* ldctor.c: Likewise.
* ldelf.c: Likewise.
* ldelfgen.c: Likewise.
* ldemul.c: Likewise.
* ldexp.c: Likewise.
* ldfile.c: Likewise.
* ldgram.c: Likewise.
* ldlex.l: Likewise.
* ldmain.c: Likewise.
* ldmisc.c: Likewise.
* ldver.c: Likewise.
* ldwrite.c: Likewise.
* lexsup.c: Likewise.
* mri.c: Likewise.
* pe-dll.c: Likewise.
* plugin.c: Likewise.
* ldelfgen.c (ldelf_emit_ctf_early): New.
(ldelf_examine_strtab_for_ctf): tell libctf about the symtab and
strtab.
(struct ctf_strsym_iter_cb_arg): New, state to do so.
(ldelf_ctf_strtab_iter_cb): New: tell libctf about
each string in the strtab in turn.
(ldelf_ctf_symbols_iter_cb): New, tell libctf
about each symbol in the symtab in turn.
* ldelfgen.h (struct elf_sym_strtab): Add forward.
(struct elf_strtab_hash): Likewise.
(struct ctf_file): Likewise.
(ldelf_emit_ctf_early): Declare.
(ldelf_examine_strtab_for_ctf): Likewise.
* emultempl/elf-generic.em (LDEMUL_EMIT_CTF_EARLY): Set it.
(LDEMUL_EXAMINE_STRTAB_FOR_CTF): Likewise.
* emultempl/aix.em (ld_${EMULATION_NAME}_emulation): Add
emit_ctf_early and examine_strtab_for_ctf, NULL by default.
* emultempl/armcoff.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/beos.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/elf.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/generic.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/linux.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/msp430.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/pe.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/pep.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/ticoff.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/vanilla.em (ld_vanilla_emulation): Likewise.
* Makefile.am: Pull in libctf (and zlib, a transitive requirement
for compressed CTF section emission). Pass it on to DejaGNU.
* configure.ac: Add AM_ZLIB.
* aclocal.m4: Added zlib.m4.
* Makefile.in: Regenerated.
* testsuite/ld-bootstrap/bootstrap.exp: Use it when relinking ld.
The CTF linking process wants to deduplicate the CTF strtab against the
ELF strtab, for which it needs to know the number of strings in the
strtab and it needs to be able to extract them one by one.
The BFD strtab functions only support returning the
size-or-section-length of the strtab (with _bfd_elf_strtab_size)
and returning the offset (but not string!) and decrementing the refcount
at the same time.
So add new functions _bfd_elf_strtab_len (that just returns the length
in strings of the strtab, never the section size) and bfd_elf_strtab_str
(which returns the string at a given strtab index, and its offset,
without touching the refcount).
It is probably a mistake to use _bfd_elf_strtab_str in particular before
_bfd_elf_strtab_finalize is called, and will not produce useful output
if you do so.
v5: fix tabdamage.
bfd/
* elf-strtab.c (_bfd_elf_strtab_len): New.
(_bfd_elf_strtab_str): Likewise.
* bfd-elf.h: Declare them.
The code in ctf_bfdopen_ctfsect (which is the ultimate place where you
end up if you use ctf_open to open a CTF file and pull in the ELF string
and symbol tables) was written before it was possible to actually test
it, since the linker was not written. Now it is, it turns out that the
previous code was completely nonfunctional: it assumed that you could
load the symbol table via bfd_section_from_elf_index (...,elf_onesymtab())
and the string table via bfd_section_from_elf_index on the sh_link.
Unfortunately BFD loads neither of these sections in the conventional
fashion it uses for most others: the symbol table is immediately
converted into internal form (which is useless for our purposes, since
we also have to work in the absence of BFD for readelf, etc) and the
string table is loaded specially via bfd_elf_get_str_section which is
private to bfd/elf.c.
So make this function public, export it in elf-bfd.h, and use it from
libctf, which does something similar to what bfd_elf_sym_name and
bfd_elf_string_from_elf_section do. Similarly, load the symbol table
manually using bfd_elf_get_elf_syms and throw away the internal form
it generates for us (we never use it).
BFD allocates the strtab for us via bfd_alloc, so we can leave BFD to
deallocate it: we allocate the symbol table ourselves before calling
bfd_elf_get_elf_syms, so we still have to free it.
Also change the rules around what you are allowed to provide: It is
useful to provide a string section but no symbol table, because CTF
sections can legitimately have no function info or data object sections
while relying on the ELF strtab for some of their strings. So allow
that combination.
v4: adjust to upstream changes. ctf_bfdopen_ctfsect's first parameter
is potentially unused again (if BFD is not in use for this link
due to not supporting an ELF target).
v5: fix tabdamage.
bfd/
* elf-bfd.h (bfd_elf_get_str_section): Add.
* elf.c (bfd_elf_get_str_section): No longer static.
libctf/
* ctf-open-bfd.c: Add <assert.h>.
(ctf_bfdopen_ctfsect): Open string and symbol tables using
techniques borrowed from bfd_elf_sym_name.
(ctf_new_archive_internal): Improve comment.
* ctf-archive.c (ctf_arc_close): Do not free the ctfi_strsect.
* ctf-open.c (ctf_bufopen): Allow opening with a string section but
no symbol section, but not vice versa.
In check_relocs, bfd_link_pic true means ld is producing a shared
library or a position independent executable. !bfd_link_pic means a
fixed position (ie. static) executable since the relocatable linking
case is excluded. So it is appropriate to continue using bfd_link_pic
when testing whether non-pcrelative relocations should be dynamic, and
!bfd_link_pic for the special case of ifunc in static executables.
However, -Bsymbolic shouldn't affect PIEs (they are executables so
none of their symbols should be overridden) and PIEs can support copy
relocations, thus bfd_link_executable should be used in those cases
rather than bfd_link_pic.
I've also removed the test of ELIMINATE_COPY_RELOCS in check_relocs.
We can sort out what to do regarding copy relocs later, which allows
the code in check_relocs to be simplified.
* elf64-ppc.c (ppc64_elf_check_relocs): Use bfd_link_executable
in choosing between different actions for shared library and
non-shared library cases. Delete ELIMINATE_COPY_RELOCS test.
(dec_dynrel_count): Likewise. Account for ifunc special case.
(ppc64_elf_adjust_dynamic_symbol): Copy relocs are for executables,
not non-pic.
(allocate_dynrelocs): Comment fixes. Delete ELIMINATE_COPY_RELOCS
test.
bfd/
* bfd-in.h: Move arm declaraions..
* cpu-arm.h: ..to here, new file..
* coff-arm.h: ..and here, new file..
* elf32-arm.h: ..and here, new file.
* cpu-arm.c: Include cpu-arm.h.
* coff-arm.c: Include cpu-arm.h and coff-arm.h.
* elf32-arm.c: Include cpu-arm.h and elf32-arm.h.
* pe-arm.c: Move function rename defines later.
* pe-arm-wince.c: Likewise and include sysdep.h and bfd.h early.
* bfd-in2.h: Regenerate.
gas/
* config/tc-arm.c: Include cpu-arm.h.
ld/
* emultempl/armelf.em: Include elf32-arm.h.
* emultempl/pe.em: Move func defines later and include coff-arm.h.
For the lui and auipc relaxations, since the symbol value of an undefined weak
symbol is always be zero, we can optimize the patterns into a single LI/MV/ADDI
instruction.
bfd/
* elfnn-riscv.c (riscv_pcgp_hi_reloc): Add new field undefined_weak.
(riscv_record_pcgp_hi_reloc): New parameter undefined_weak.
Set undefined_weak field from it.
(relax_func_t): New parameter undefined_weak.
(_bfd_riscv_relax_call): New ignored parameter undefined_weak.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_delete): Likewise.
(_bfd_riscv_relax_lui): New parameter undefined_weak. If true,
allow relaxing. For LO12* relocs, set rs1 to x0 when undefined_weak.
(_bfd_riscv_relax_pc): New parameter undefined_weak. For LO12* relocs,
set undefined_weak from hi_reloc. If true, allow relaxing. For LO12*
relocs, set rs1 to x0 when undefined_weak and change to non-pcrel
reloc.
(_bfd_riscv_relax_section): New local undefined_weak. Set for
undef weak relocs that can be relaxed. Pass to relax_func call.
ld/
* testsuite/ld-riscv-elf/weakref32.s: Add relaxable undef weak code.
* testsuite/ld-riscv-elf/weakref64.s: Likewise.
* testsuite/ld-riscv-elf/weakref32.d: Updated.
* testsuite/ld-riscv-elf/weakref64.d: Updated.
This one exposed a bug in tic6x gas, found with inline function
parameter type checking. struct bfd_section and struct bfd_symbol
both have a flags field, so bfd_is_com_section (symbol) compiled OK
when bfd_is_com_section was a macro but didn't special case common
symbols.
bfd/
* bfd-in.h (bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment, bfd_section_flags),
(bfd_section_userdata, bfd_is_com_section, discarded_section),
(bfd_get_section_limit_octets, bfd_get_section_limit): Delete macros.
* bfd.c (bfd_get_section_limit_octets, bfd_get_section_limit),
(bfd_section_list_remove, bfd_section_list_append),
(bfd_section_list_prepend, bfd_section_list_insert_after),
(bfd_section_list_insert_before, bfd_section_removed_from_list):
New inline functions.
* section.c (bfd_is_und_section, bfd_is_abs_section),
(bfd_is_ind_section, bfd_is_const_section, bfd_section_list_remove),
(bfd_section_list_append, bfd_section_list_prepend),
(bfd_section_list_insert_after, bfd_section_list_insert_before),
(bfd_section_removed_from_list): Delete macros.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment, bfd_section_flags),
(bfd_section_userdata, bfd_is_com_section, bfd_is_und_section),
(bfd_is_abs_section, bfd_is_ind_section, bfd_is_const_section),
(discarded_section): New inline functions.
* bfd-in2.h: Regenerate.
gas/
* config/tc-tic6x.c (tc_gen_reloc): Correct common symbol check.
ld/
* emultempl/xtensaelf.em (xtensa_get_section_deps): Comment.
Use bfd_section_userdata.
(xtensa_set_section_deps): Use bfd_set_section_userdata.
* ldlang.c (lang_output_section_get): Use bfd_section_userdata.
(sort_def_symbol): Likewise, and bfd_set_section_userdata.
(init_os): Use bfd_set_section_userdata.
(print_all_symbols): Use bfd_section_userdata.
* ldlang.h (get_userdata): Delete.
This patch corrects the set of dynamic relocations recognised by gold
as supported by glibc, and teaches ld.bfd to report an error similar
to the gold error. Note that ld --noinhibit-exec can be used to
produce an output, supporting older ld with newer glibc if the set of
supported glibc dynamic relocations changes.
bfd/
* elf64-ppc.c (ppc64_glibc_dynamic_reloc): New function.
(ppc64_elf_relocate_section): Error if emitting unsupported
dynamic relocations.
gold/
* powerpc.cc (Target_powerpc::Scan::check_non_pic): Move REL24
to 32-bit supported.
I get some spurious changes when running autoconf/automake for various
projects in the tree. This is likely because they were generated using
distro-patched tools last time.
I ran `autoreconf -f` in the various automake projects of the
binutils-gdb tree, and this is the result. The tools I am using have
been compiled from source, from the upstream release.
bfd/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gas/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gold/ChangeLog:
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
ld/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
opcodes/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
Fixes a few leaks in bfd and ld.
bfd/
* mach-o.c (bfd_mach_o_fat_member_init): Likewise. Replace
xstrdup and xmalloc with bfd_strdup and bfd_malloc. Return an
error status. Adjust calls.
* vms-lib.c (_bfd_vms_lib_get_module): Test mhd->id earlier.
Close bfd on failure. Replace xstrdup/bfd_alloc use with
bfd_malloc. Use bfd_set_filename.
gdb/
* solib-spu.c (spu_bfd_open): Use bfd_set_filename.
* spu-linux-nat.c (spu_bfd_open): Likewise.
ld/
* emultempl/pe.em (after_open): Use bfd_set_filename.
* emultempl/pep.em (after_open): Use bfd_set_filename.
Some versions of clang apparently generate non-PIC on powerpc64le to
access common symbols. Since a common symbol and a strong definition
with the same name should resolve to the strong definition we have the
possibility of non-PIC attempting to access shared library variables.
This is really a clanger since powerpc64le is supposed to be PIC by
default, but let's see if ld can cope by generating .dynbss copies.
* elf64-ppc.c (must_be_dyn_reloc): Return 0 for TOC16 relocs.
(ppc64_elf_check_relocs): Support dynamic/copy relocs for TOC16.
(ppc64_elf_adjust_dynamic_symbol): Don't keep dynamic reloc when
needs_copy even if all relocs are in rw sections.
(dec_dynrel_count): Handle TOC16 relocs.
(ppc64_elf_relocate_section): Support dynamic relocs for TOC16.
(ppc64_elf_finish_dynamic_symbol): Adjust to handle needs_copy
semantic change.
This introduces a new bfd_set_filename function, which is then used in
various spots in gdb. This allows for the removal of some casts.
bfd/ChangeLog
2019-09-11 Tom Tromey <tom@tromey.com>
* opncls.c (bfd_set_filename): New function.
* bfd-in2.h: Regenerate.
gdb/ChangeLog
2019-09-11 Tom Tromey <tom@tromey.com>
* symfile-mem.c (symbol_file_add_from_memory): Use
bfd_set_filename.
* solib-darwin.c (darwin_bfd_open): Use bfd_set_filename.
* solib-aix.c (solib_aix_bfd_open): Use bfd_set_filename.
PC-relative relocs typically use the addend in adjusting what they are
relative to. For example:
bcl 20,31,1f
1: mflr 12
addi 12,12,xxx-1b
generates "R_PPC64_REL16 xxx+0x4" for the addi (when little-endian).
The addend reflects the fact that you want the offset relative to the
previous insn not the current one in this case.
So the question is, will we ever want to do something like that for an
instruction using R_PPC64_GOT_PCREL34? I thought so at the time I
first implemented support in ld but at the time I think the hardware
was possibly going to support pcrel+offset+reg addressing. In which
case you might want something like:
load_big_offset_into_r2
pld 3,sym-big_offset@got@pcrel(2)
which would be a way of supporting more than 8G offsets from code to
the GOT. We could do the same with
load_big_offset_into_r2
pla 9,sym-big_offset@got@pcrel
ldx 3,9,2
However, this is really a poor version of TOC-pointer relative code.
So let's go with an addend on R_PPC64_GOT_PCREL34 meaning that
sym+addend should be put in a GOT entry, and the relocation calculate
the pc-relative offset to that GOT entry.
Note that this is an extension to the ABI, which says (by the
expression given for GOT relocs) that non-zero addends on GOT and PLT
relocs are ignored. This is true for all GOT/PLT relocs, not just the
pcrel ones.
* elf64-ppc.c (ppc64_elf_check_relocs): Interpret an addend in
GOT_PCREL and PLT_PCREL relocs as affecting the value stored
in the GOT/PLT entry rather than affecting the offset to that
GOI/PLT entry.
(ppc64_elf_edit_toc, ppc64_elf_relocate_section): Likewise.
The loads and stores handled in the second instruction of a sequence
marked by R_PPC64_PCREL_OPT may be a prefix instruction. For example:
pld ra,symbol@got@pcrel
0:
pld rt,off(ra)
.reloc 0b-8,R_PPC64_PCREL_OPT,(.-8)-(0b-8)
can be optimised to
pld rt,symbol+off@pcrel
pnop
* elf64-ppc.c (xlate_pcrel_opt): Handle prefix loads and stores
in second instruction.
(ppc64_elf_relocate_section): Likewise.
This patch fixes the worst of the cases where libbfd might terminate
a program due to calling xstrdup or xmalloc. I've also fixed some
error paths that didn't clean up properly.
PR 24955
* libbfd-in.h (bfd_strdup): New inline function.
* archive.c (_bfd_get_elt_at_filepos): Use bfd_strdup. Close
bfd on error.
* elfcode.h (_bfd_elf_bfd_from_remote_memory): Use bfd_strdup.
* opncls.c (bfd_fopen): Use bfd_strdup. Close fd and stream
on error.
(bfd_openstreamr): Use bfd_strdup.
(bfd_openr_iovec, bfd_openw, bfd_create): Likewise.
* plugin.c (try_load_plugin): Use bfd_malloc.
* libbfd.h: Regenerate.
This fixes a small leak of debug_filename. bfd_openr copies the file
name since git commit 1be5090bca.
PR 11983
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Free debug_filename
on success. Tidy.
The linker doesn't allocate memory space for sections that are only SEC_ALLOC
and SEC_THREAD_LOCAL. See the IS_TBSS test in ld/ldlang.c. So we need to
pretend that .tdata.dyn sections have contents to get the right result. It
will be marked this way anyways if there is a .tdata section to merge with.
bfd/
PR 23825
* elfnn-riscv.c (riscv_elf_create_dynamic_sections): Add SEC_LOAD,
SEC_DATA, and SEC_HAS_CONTENTS to .tdata.dyn section.
This was noticed while trying to test the compiler -msave-restore support.
Putting non-pic code in a shared library gives a linker error, but doesn't
stop the build.
rohan:2030$ cat libtmp.c
extern int sub2 (int);
int sub (int i) { return sub2 (i + 10); }
rohan:2031$ cat libtmp2.c
extern int sub (int);
int sub2 (int i) { return sub (i + 10); }
rohan:2032$ riscv64-unknown-linux-gnu-gcc --shared -o libtmp.so libtmp.c
rohan:2033$ riscv64-unknown-linux-gnu-gcc --shared -o libtmp2.so libtmp2.c libtmp.so
/home/jimw/FOSS/install-riscv64/lib/gcc/riscv64-unknown-linux-gnu/8.3.0/../../../../riscv64-unknown-linux-gnu/bin/ld: /tmp/cctrsIBe.o(.text+0x18): unresolvable R_RISCV_CALL relocation against symbol `sub'
rohan:2034$ echo $?
0
rohan:2035$ ls -lt libtmp2.so
-rwxr-xr-x 1 jimw jimw 6912 Aug 30 14:32 libtmp2.so
rohan:2036$
The patch fixes this by forcing a linker error. I now get this.
ohan:2059$ sh tmp.script
/home/jimw/FOSS/BINUTILS/X-riscv64-linux/ld/ld-new: libtmp2.o(.text+0x18): unresolvable R_RISCV_CALL relocation against symbol `sub'
/home/jimw/FOSS/BINUTILS/X-riscv64-linux/ld/ld-new: final link failed: bad value
rohan:2060$ echo $?
1
rohan:2061$ ls -lt libtmp2.so
ls: cannot access 'libtmp2.so': No such file or directory
bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): For unresolvable reloc
error, call bfd_set_error, set ret to FALSE, and goto out label.
We need to copy BFD_COMPRESS, BFD_DECOMPRESS and BFD_COMPRESS_GABI flags
for thin archive.
PR ld/24951
* archive.c (_bfd_get_elt_at_filepos): Copy BFD_COMPRESS,
BFD_DECOMPRESS and BFD_COMPRESS_GABI flags for thin archive.
This removes a restriction on various R_PPC_EMB relocations that has
been present for ppc32 since 1996-04-26 git commit e25a798839. As far
as I know, only those relocs that would require addressing via r2 for
.sdata2/.sbss2 access are disallowed in shared libraries.
PR 24697
* elf32-ppc.c (ppc_elf_check_relocs): Call bad_shared_reloc
when !bfd_link_executable for R_PPC_EMB_SDA2I16 and
R_PPC_EMB_SDA2REL. Don't call bad_shared_reloc for any other
reloc.