$ make check RUNTESTFLAGS="--target_board=native-gdbserver no-attach-trace.exp"
...
(gdb) trace main
Tracepoint 1 at 0x400594: file /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.trace/no-attach-trace.c, line 25.
(gdb) PASS: gdb.trace/no-attach-trace.exp: set tracepoint on main
tstart
You can't do that when your target is `exec'
(gdb) FAIL: gdb.trace/no-attach-trace.exp: tstart
Even though this target supports tracing, the test restarts GDB and
doesn't do gdb_run_cmd so does not reconnect to the remote target. So
at that point, GDB only has the "exec" target, which obviously doesn't
do tracing.
The test is about doing "tstart" before running a program, so the fix
is to do gdb_target_supports_trace with whatever target GDB ends up
connected after clean_restart.
Tested on x86_64 Fedora 20, native, native-gdbserver and
native-extended-gdbserver boards. The test passes with the latter,
and is skipped with the first two.
gdb/testsuite/ChangeLog:
2015-02-20 Pedro Alves <palves@redhat.com>
* gdb.trace/no-attach-trace.exp: Don't run to main. Do
clean_restart before gdb_target_supports_trace.
On GNU/Linux, if a pthreaded program has a thread call clone(CLONE_VM)
directly, and then that clone LWP hits a debug event (breakpoint,
etc.) GDB internal errors. Threaded programs shouldn't really be
calling clone directly, but GDB shouldn't crash either.
The crash looks like this:
(gdb) break clone_fn
Breakpoint 2 at 0x4007d8: file clone-thread_db.c, line 35.
(gdb) r
...
[Thread debugging using libthread_db enabled]
...
src/gdb/linux-nat.c:1030: internal-error: lin_lwp_attach_lwp: Assertion `lwpid > 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
The problem is that 'clone' ends up clearing the parent thread's tid
field in glibc's thread data structure. For x86_64, the glibc code in
question is here:
sysdeps/unix/sysv/linux/x86_64/clone.S:
...
testq $CLONE_THREAD, %rdi
jne 1f
testq $CLONE_VM, %rdi
movl $-1, %eax <----
jne 2f
movl $SYS_ify(getpid), %eax
syscall
2: movl %eax, %fs:PID
movl %eax, %fs:TID <----
1:
When GDB refreshes the thread list out of libthread_db, it finds a
thread with LWP with pid -1 (the clone's parent), which naturally
isn't yet on the thread list. GDB then tries to attach to that bogus
LWP id, which is caught by that assertion.
The fix is to detect the bad PID early.
Tested on x86-64 Fedora 20. GDBserver doesn't need any fix.
gdb/ChangeLog:
2015-02-20 Pedro Alves <palves@redhat.com>
PR threads/18006
* linux-thread-db.c (thread_get_info_callback): Return early if
the thread's lwp id is -1.
gdb/testsuite/ChangeLog:
2015-02-20 Pedro Alves <palves@redhat.com>
PR threads/18006
* gdb.threads/clone-thread_db.c: New file.
* gdb.threads/clone-thread_db.exp: New file.
When gdb creates a dummy frame to execute a function in the inferior,
the process may generate a SIGSEGV, SIGTRAP or SIGILL because the stack
is non executable. If the signal handler set in gdb has option print
or stop enabled for these signals gdb handles this correctly.
However, in the case of noprint and nostop the signal is short-circuited
and the inferior process is sent the signal directly. This causes the
inferior to crash because of gdb.
This patch adds a check for SIGSEGV, SIGTRAP or SIGILL so that these
signals are sent to gdb rather than short-circuited in the inferior.
gdb then handles them properly and the inferior process does not
crash.
This patch also fixes the same behavior in gdbserver.
Also added a small testcase to test the issue called catch-gdb-caused-signals.
This applies to Linux only, tested on Linux.
gdb/ChangeLog:
PR breakpoints/16812
* linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
* nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
* nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
gdb/gdbserver/ChangeLog:
PR breakpoints/16812
* linux-low.c (wstatus_maybe_breakpoint): Remove.
(linux_low_filter_event): Update wstatus_maybe_breakpoint name.
(linux_wait_1): Report SIGTRAP,SIGILL,SIGSEGV.
gdb/testsuite/ChangeLog:
PR breakpoints/16812
* gdb.base/catch-gdb-caused-signals.c: New file.
* gdb.base/catch-gdb-caused-signals.exp: New file.
gdb/doc/agentexpr.texi documents the "setv" opcode as follow:
@item @code{setv} (0x2d) @var{n}: @result{} @var{v}
Set trace state variable number @var{n} to the value found on the top
of the stack. The stack is unchanged, so that the value is readily
available if the assignment is part of a larger expression. The
handling of @var{n} is as described for @code{getv}.
The @item line is incorrect (and does not match with its
description), so this patch fixes it.
Additionally, in gdb/common/ax.def we find the line:
DEFOP (setv, 2, 0, 0, 1, 0x2d)
From the comment earlier in the file:
Each line is of the form:
DEFOP (name, size, data_size, consumed, produced, opcode)
[...]
CONSUMED is the number of stack elements consumed.
PRODUCED is the number of stack elements produced.
which is saying that nothing is consumed and one item is produced.
Both should be 0 or both should be 1.
This patch sets them both to 1, which seems better since if nothing
is on the stack an error will occur.
gdb/ChangeLog:
* common/ax.def (setv): Fix consumed entry in setv DEFOP.
gdb/doc/ChangeLog:
* agentexpr.texi (Bytecode Descriptions): Fix summary line for setv.
Tested on x86_64-linux.
This patch teaches the TUI to resize itself asynchronously instead of
synchronously. Asynchronously resizing the screen when the underlying
terminal gets resized is the more intuitive behavior and is surprisingly
simple to implement thanks to GDB's async infrastructure.
The implementation is straightforward. TUI's SIGWINCH handler is just
tweaked to asynchronously invoke a new callback,
tui_async_resize_screen, which is responsible for safely resizing the
screen. Care must be taken to not to attempt to asynchronously resize
the screen while the TUI is not active. When the TUI is not active, the
callback will do nothing, but the screen will yet be resized in the next
call to tui_enable() by virtue of win_resized being TRUE.
(So, after the patch there are still two places where the screen gets
resized: one in tui_enable() and the other now in
tui_async_resize_screen() as opposed to being in
tui_handle_resize_during_io(). The one in tui_enable() is still
necessary to handle the case where the terminal gets resized inside the
CLI: in that case, the TUI still needs resizing, but it must wait until
the TUI gets re-enabled.)
gdb/ChangeLog:
* tui/tui-io.c (tui_handle_resize_during_io): Remove this
function.
(tui_putc): Don't call tui_handle_resize_during_io.
(tui_getc): Likewise.
(tui_mld_getc): Likewise.
* tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
(tui_sigwinch_token): New static variable.
(tui_initialize_win): Adjust documentation. Set
tui_sigwinch_token.
(tui_async_resize_screen): New asynchronous callback.
(tui_sigwinch_handler): Adjust documentation. Asynchronously
invoke tui_async_resize_screen.
This patch introduces a new M4 macro GDB_AC_TRANSFORM to avoid repeating
the common idiom which is the transformation of target program names,
i.e. from gdb to sparc64-linux-gnu-gdb. It also makes gdb/configure.ac
and gdb/testsuite/configure.ac to use the new macro.
gdb/ChangeLog:
2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure: Regenerated.
* configure.ac: Use GDB_AC_TRANSFORM.
* Makefile.in (aclocal_m4_deps): Added transform.m4.
* acinclude.m4: sinclude transform.m4.
* transform.m4: New file.
(GDB_AC_TRANSFORM): New macro.
gdb/testsuite/ChangeLog:
2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure: Regenerated.
* configure.ac: Use GDB_AC_TRANSFORM.
* aclocal.m4: sinclude ../transform.m4.
This patch simply adds a small entry to `Changes since GDB 7.8' announcing the
support for dtrace probes.
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* NEWS: Announce the support for DTrace SDT probes.
This patch modifies the `Static Probe Points' section on the GDB
manual in order to cover the support for DTrace USDT probes, in
addition to SystemTap SDT probes.
gdb/doc/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.texinfo (Static Probe Points): Add cindex `static probe
point, DTrace'.
(Static Probe Points): Modified to cover DTrace probes in addition
to SystemTap probes. Also modified to cover the `enable probe'
and `disable probe' commands.
This patch adds some simple tests testing the support for DTrace USDT
probes. The testsuite will be skipped as unsupported in case the user
does not have DTrace installed on her system. The tests included in the
test suite test breakpointing on DTrace probes, enabling and disabling
probes, printing of probe arguments of several types and also
breakpointing on several probes with the same name.
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* lib/dtrace.exp: New file.
* gdb.base/dtrace-probe.exp: Likewise.
* gdb.base/dtrace-probe.d: Likewise.
* gdb.base/dtrace-probe.c: Likewise.
* lib/pdtrace.in: Likewise.
* configure.ac: Output variables with the transformed names of
the strip, readelf, as and nm tools. AC_SUBST lib/pdtrace.in.
* configure: Regenerated.
This patch adds the target-specific code in order to support the
calculation of DTrace probes arguments in x86_64 targets, and also the
enabling and disabling of probes. This is done by implementing the
`dtrace_*' gdbarch handlers.
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
(amd64_dtrace_parse_probe_argument): New function.
(amd64_dtrace_probe_is_enabled): Likewise.
(amd64_dtrace_enable_probe): Likewise.
(amd64_dtrace_disable_probe): Likewise.
(amd64_linux_init_abi): Register the
`gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
`gdbarch_dtrace_disable_probe' and
`gdbarch_dtrace_probe_is_enabled' hooks.
(amd64_dtrace_disabled_probe_sequence_1): New constant.
(amd64_dtrace_disabled_probe_sequence_2): Likewise.
(amd64_dtrace_enable_probe_sequence): Likewise.
(amd64_dtrace_disable_probe_sequence): Likewise.
This patch adds a new type of probe to GDB: the DTrace USDT probes. The new
type is added by providing functions implementing all the entries of the
`probe_ops' structure defined in `probe.h'. The implementation is
self-contained and does not depend on DTrace source code in any way.
gdb/ChangeLog:
2015-02-7 Jose E. Marchesi <jose.marchesi@oracle.com>
* breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
the -probe-dtrace new vpossible value for PROBE_MODIFIER.
* configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
handle ELF files.
* Makefile.in (SFILES): dtrace-probe.c added.
* configure: Regenerate.
* dtrace-probe.c: New file.
(SHT_SUNW_dof): New constant.
(dtrace_probe_type): New enum.
(dtrace_probe_arg): New struct.
(dtrace_probe_arg_s): New typedef.
(struct dtrace_probe_enabler): New struct.
(dtrace_probe_enabler_s): New typedef.
(dtrace_probe): New struct.
(dtrace_probe_is_linespec): New function.
(dtrace_dof_sect_type): New enum.
(dtrace_dof_dofh_ident): Likewise.
(dtrace_dof_encoding): Likewise.
(DTRACE_DOF_ENCODE_LSB): Likewise.
(DTRACE_DOF_ENCODE_MSB): Likewise.
(dtrace_dof_hdr): New struct.
(dtrace_dof_sect): Likewise.
(dtrace_dof_provider): Likewise.
(dtrace_dof_probe): Likewise.
(DOF_UINT): New macro.
(DTRACE_DOF_PTR): Likewise.
(DTRACE_DOF_SECT): Likewise.
(dtrace_process_dof_probe): New function.
(dtrace_process_dof): Likewise.
(dtrace_build_arg_exprs): Likewise.
(dtrace_get_arg): Likewise.
(dtrace_get_probes): Likewise.
(dtrace_get_probe_argument_count): Likewise.
(dtrace_can_evaluate_probe_arguments): Likewise.
(dtrace_evaluate_probe_argument): Likewise.
(dtrace_compile_to_ax): Likewise.
(dtrace_probe_destroy): Likewise.
(dtrace_gen_info_probes_table_header): Likewise.
(dtrace_gen_info_probes_table_values): Likewise.
(dtrace_probe_is_enabled): Likewise.
(dtrace_probe_ops): New variable.
(info_probes_dtrace_command): New function.
(_initialize_dtrace_probe): Likewise.
(dtrace_type_name): Likewise.
This patch adds several gdbarch functions (along with the corresponding
predicates): `dtrace_parse_probe_argument', `dtrace_probe_is_enabled',
`dtrace_enable_probe' and `dtrace_disable_probe'. These functions will
be implemented by target-specific code, and called from the DTrace
probes implementation in order to calculate the value of probe
arguments, and manipulate is-enabled probes.
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdbarch.sh (dtrace_parse_probe_argument): New.
(dtrace_probe_is_enabled): Likewise.
(dtrace_enable_probe): Likewise.
(dtrace_disable_probe): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
This patch adds the above-mentioned commands to the generic probe
abstraction implemented in probe.[ch]. The effects associated to
enabling or disabling a probe depend on the type of probe being
handled, and is triggered by invoking two back-end hooks in
`probe_ops'.
In case some particular probe type does not support the notion of
enabling and/or disabling, the corresponding fields on `probe_ops' can
be initialized to NULL. This is the case of SystemTap probes.
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* stap-probe.c (stap_probe_ops): Add NULLs in the static
stap_probe_ops for `enable_probe' and `disable_probe'.
* probe.c (enable_probes_command): New function.
(disable_probes_command): Likewise.
(_initialize_probe): Define the cli commands `enable probe' and
`disable probe'.
(parse_probe_linespec): New function.
(info_probes_for_ops): Use parse_probe_linespec.
* probe.h (probe_ops): New hooks `enable_probe' and
`disable_probe'.
gdb/doc/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.texinfo (Static Probe Points): Cover the `enable probe' and
`disable probe' commands.
This patch moves the `compute_probe_arg' and `compile_probe_arg' functions
from stap-probe.c to probe.c. The rationale is that it is reasonable to
assume that all backends will provide the `$_probe_argN' convenience
variables, and that the user must be placed on the PC of the probe when
requesting that information. The value and type of the argument can still be
determined by the probe backend via the `pops->evaluate_probe_argument' and
`pops->compile_to_ax' handlers.
Note that a test in gdb.base/stap-probe.exp had to be adjusted because the "No
SystemTap probe at PC" messages are now "No probe at PC".
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* probe.c (compute_probe_arg): Moved from stap-probe.c
(compile_probe_arg): Likewise.
(probe_funcs): Likewise.
* stap-probe.c (compute_probe_arg): Moved to probe.c.
(compile_probe_arg): Likewise.
(probe_funcs): Likewise.
gdb/testsuite/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.base/stap-probe.exp (stap_test): Remove "SystemTap" from
expected message when trying to access $_probe_* convenience
variables while not on a probe.
A "probe type" (backend for the probe abstraction implemented in
probe.[ch]) can extend the information printed by `info probes' by
defining additional columns. This means that when `info probes' is
used to print all the probes regardless of their types, some of the
columns will be "not applicable" to some of the probes (like, say, the
Semaphore column only makes sense for SystemTap probes). This patch
makes `info probes' fill these slots with "n/a" marks (currently it
breaks the table) and not include headers for which no actual probe
has been found in the list of defined probes.
This patch also adds support for a new generic column "Type", that
displays the type of each probe. SystemTap probes identify themselves
as "stap" probes.
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* probe.c (print_ui_out_not_applicables): New function.
(exists_probe_with_pops): Likewise.
(info_probes_for_ops): Do not include column headers for probe
types for which no probe has been actually found on any object.
Also invoke `print_ui_out_not_applicables' in order to match the
column rows with the header when probes of several types are
listed.
Print the "Type" column.
* probe.h (probe_ops): Added a new probe operation `type_name'.
* stap-probe.c (stap_probe_ops): Add `stap_type_name'.
(stap_type_name): New function.
The function key_is_command_char() is simply a predicate that determines
whether the function tui_dispatch_ctrl_char() will do anything useful.
Since tui_dispatch_ctrl_char() performs the same checks as
key_is_command_char() it is unnecessary to keep key_is_command_char()
around. This patch removes this useless function and instead
unconditionally calls tui_dispatch_ctrl_char() inside its only caller,
tui_getc().
gdb/ChangeLog:
* tui/tui-io.c (tui_getc): Don't call key_is_command_char.
(key_is_command_char): Delete.
If the user:
#1 - disables the TUI
#2 - resizes the terminal
#3 - and then re-enables the TUI
the next wgetch() returns KEY_RESIZE. This indicates to the ncurses
client that ncurses detected that the terminal has been resized. We
don't handle KEY_RESIZE anywhere, so it gets passed on to readline
which interprets it as a multibyte character, and then the end result
is that the first key press after enabling the TUI is misinterpreted.
We shouldn't really need to handle KEY_RESIZE (and not all ncurses
implementations have that). We have our own SIGWINCH handler, and,
when we re-enable the TUI, we explicitly detect terminal resizes and
resize all windows. The reason ncurses currently does detects a
resize is that something within tui_enable forces a refresh/display of
some window before we get to do the actual resizing. Setting a break
on ncurses' 'resizeterm' function helps find the culprit(s):
(top-gdb) bt
#0 resizeterm (ToLines=28, ToCols=114) at ../../ncurses/base/resizeterm.c:462
#1 0x0000003b42812f3f in _nc_update_screensize (sp=0x2674730) at ../../ncurses/tinfo/lib_setup.c:443
#2 0x0000003b0821cbe0 in doupdate () at ../../ncurses/tty/tty_update.c:726
#3 0x0000003b08215539 in wrefresh (win=0x2a7bc00) at ../../ncurses/base/lib_refresh.c:65
#4 0x00000000005257cb in tui_refresh_win (win_info=0xd73d60 <_locator>) at /home/pedro/gdb/mygit/src/gdb/tui/tui-wingeneral.c:60
#5 0x000000000052265b in tui_show_locator_content () at /home/pedro/gdb/mygit/src/gdb/tui/tui-stack.c:269
#6 0x00000000005273a6 in tui_set_key_mode (mode=TUI_COMMAND_MODE) at /home/pedro/gdb/mygit/src/gdb/tui/tui.c:321
#7 0x00000000005278c7 in tui_enable () at /home/pedro/gdb/mygit/src/gdb/tui/tui.c:494
#8 0x0000000000527011 in tui_rl_switch_mode (notused1=1, notused2=1) at /home/pedro/gdb/mygit/src/gdb/tui/tui.c:108
That is, tui_enable calls tui_set_key_mode before we've resized all
windows, and that refreshes a window as side effect.
And if we're already debugging something (there's a frame), then we'll
instead show a window from within tui_show_frame_info:
(top-gdb) bt
#0 resizeterm (ToLines=28, ToCols=114) at ../../ncurses/base/resizeterm.c:462
#1 0x0000003b42812f3f in _nc_update_screensize (sp=0x202e6c0) at ../../ncurses/tinfo/lib_setup.c:443
#2 0x0000003b0821cbe0 in doupdate () at ../../ncurses/tty/tty_update.c:726
#3 0x0000003b08215539 in wrefresh (win=0x2042890) at ../../ncurses/base/lib_refresh.c:65
#4 0x00000000005257cb in tui_refresh_win (win_info=0xd73d60 <_locator>) at /home/pedro/gdb/mygit/src/gdb/tui/tui-wingeneral.c:60
#5 0x000000000052265b in tui_show_locator_content () at /home/pedro/gdb/mygit/src/gdb/tui/tui-stack.c:269
#6 0x0000000000522931 in tui_show_frame_info (fi=0x16b9cc0) at /home/pedro/gdb/mygit/src/gdb/tui/tui-stack.c:364
#7 0x00000000005278ba in tui_enable () at /home/pedro/gdb/mygit/src/gdb/tui/tui.c:491
#8 0x0000000000527011 in tui_rl_switch_mode (notused1=1, notused2=1) at /home/pedro/gdb/mygit/src/gdb/tui/tui.c:108
The fix is to resize windows earlier.
gdb/ChangeLog:
2015-02-17 Pedro Alves <palves@redhat.com>
* tui/tui.c (tui_enable): Resize windows before anything
might show a window.
Current trunk GDB (and gdb-7.8.1 too) fails to build on Aarch64 when
-fno-common is enabled. It fails during link stage due to multiple
definition of `tdesc_aarch64':
...
[ 199s] aarch64-linux-nat.o: In function `initialize_tdesc_aarch64':
[ 199s]
/home/abuild/rpmbuild/BUILD/gdb-7.8.1/gdb/features/aarch64.c:11:
multiple definition of `tdesc_aarch64'
[ 199s]
aarch64-tdep.o:/home/abuild/rpmbuild/BUILD/gdb-7.8.1/gdb/objfiles.h:540:
first defined here
[ 199s] aarch64-linux-nat.o: In function `initialize_tdesc_aarch64':
[ 199s]
/home/abuild/rpmbuild/BUILD/gdb-7.8.1/gdb/features/aarch64.c:11:
multiple definition of `tdesc_aarch64'
[ 199s]
aarch64-tdep.o:/home/abuild/rpmbuild/BUILD/gdb-7.8.1/gdb/objfiles.h:540:
first defined here
[ 199s] collect2: error: ld returned 1 exit status
[ 199s] make[2]: *** [gdb] Error 1
...
This happens because struct target_desc *tdesc_aarch64 is defined in
gdb/features/aarch64.c, which is included by two files
(gdb/aarch64-linux-nat.c and gdb/aarch64-tdep.c).
gdb/Changelog
2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
PR gdb/17984
* aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
(aarch64_linux_read_description): Remove initialize_tdesc_aarch64
call.
* aarch64-tdep.h (tdesc_aarch64): Declare.
gdb/ChangeLog:
* cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
anonymous_namespace to is_in_anonymous for consistency with the rest
of the file.
(cp_lookup_bare_symbol): Fix typo in comment.
(cp_search_static_and_baseclasses): Ditto.
(search_symbol_list): Use vertical space in comment better.
(reset_directive_searched): Ditto. Fix typo.
(cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
gdb/doc/ChangeLog
2015-02-12 David Taylor <dtaylor@emc.com>
* gdb.texinfo (Tracepoint Packets): Document the builtin and name
fields of the QTDV packet.
It definitely does not test all the RETURN_MASK_ERROR cases. But it tests at
least two of them.
gdb/testsuite/ChangeLog
2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.python/py-framefilter.exp (pagination quit - *): New tests.
Now when the code is exception safe we can let RETURN_QUIT to pass through as
all the installed cleanups with handle that.
gdb/ChangeLog
2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* python/py-framefilter.c (py_print_single_arg, enumerate_locals)
(py_print_frame): Use RETURN_MASK_ERROR.
gdb/ChangeLog
2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
function comment. Wrap all function that can throw in cleanups.
(gdbpy_apply_frame_filter): Wrap all function that can throw in
cleanups.
goto error patters are sometimes AFAIK used in C for the cases like:
int retval=-1;
if (!(a=malloc())) goto error;
if (!(b=malloc())) goto error_a;
if (!(c=malloc())) goto error_b;
retval=0;
error_c: free(c);
error_b: free(b);
error_a: free(a);
error: return retval;
But here there is single error label with one do_cleanups() which I do not find
it worth the goto complication. Without goto one can then furher merge code in
the exit paths in the next patches and ... after all it is all the same, just
without a goto.
gdb/ChangeLog
2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* python/py-framefilter.c (py_print_frame): Substitute goto error.
Remove the error label.
Nothing significant but I find code more clear with less deep indentation.
gdb/ChangeLog
2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* python/py-framefilter.c (py_print_frame): Put conditional code paths
with goto first, indent the former else codepath left. Put variable
'elided' to a new inner block.
Linking GDB as a C++ program, we get:
src/gdb/buildsym.c:226: multiple definition of `within_function'
xcoffread.o:src/gdb/xcoffread.c:181: first defined here
gdb/
2015-02-11 Pedro Alves <palves@redhat.com>
* xcoffread.c (within_function): Delete.
In C, we can forward declare static structure instances. That doesn't
work in C++ though. C++ treats these as definitions. So then the
compiler complains about symbol redefinition, like:
src/gdb/elfread.c:1569:29: error: redefinition of ‘const sym_fns elf_sym_fns_lazy_psyms’
src/gdb/elfread.c:53:29: error: ‘const sym_fns elf_sym_fns_lazy_psyms’ previously declared here
The intent of static here is naturally to avoid making these objects
visible outside the compilation unit. The equivalent in C++ would be
to instead define the objects in the anonymous namespace. But given
that it's desirable to leave the codebase compiling as both C and C++
for a while, this just makes the objects extern.
(base_breakpoint_ops is already declared in breakpoint.h, so we can
just remove the forward declare from breakpoint.c)
gdb/ChangeLog:
2015-02-11 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
* breakpoint.c (base_breakpoint_ops): Delete.
* dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
* elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
* guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
* ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
* python/py-arch.c (arch_object_type): Make extern.
* python/py-block.c (block_syms_iterator_object_type): Make extern.
* python/py-bpevent.c (breakpoint_event_object_type): Make extern.
* python/py-cmd.c (cmdpy_object_type): Make extern.
* python/py-continueevent.c (continue_event_object_type)
* python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
parameter. Update all callers.
* python/py-evtregistry.c (eventregistry_object_type): Make extern.
* python/py-exitedevent.c (exited_event_object_type): Make extern.
* python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
* python/py-function.c (fnpy_object_type): Make extern.
* python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
* python/py-infevents.c (call_pre_event_object_type)
(inferior_call_post_event_object_type).
(memory_changed_event_object_type): Make extern.
* python/py-infthread.c (thread_object_type): Make extern.
* python/py-lazy-string.c (lazy_string_object_type): Make extern.
* python/py-linetable.c (linetable_entry_object_type)
(linetable_object_type, ltpy_iterator_object_type): Make extern.
* python/py-newobjfileevent.c (new_objfile_event_object_type)
(clear_objfiles_event_object_type): Make extern.
* python/py-objfile.c (objfile_object_type): Make extern.
* python/py-param.c (parmpy_object_type): Make extern.
* python/py-progspace.c (pspace_object_type): Make extern.
* python/py-signalevent.c (signal_event_object_type): Make extern.
* python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
* python/py-type.c (type_object_type, field_object_type)
(type_iterator_object_type): Make extern.
* python/python.c (python_extension_script_ops)
(python_extension_ops): Make extern.
* stap-probe.c (stap_probe_ops): Make extern.
On decr_pc_after_break targets, GDB adjusts the PC incorrectly if a
background single-step stops somewhere where PC-$decr_pc has a
breakpoint, and the thread that finishes the step is not the current
thread, like:
ADDR1 nop <-- breakpoint here
ADDR2 jmp PC
IOW, say thread A is stepping ADDR2's line in the background (an
infinite loop), and the user switches focus to thread B. GDB's
adjust_pc_after_break logic confuses the single-step stop of thread A
for a hit of the breakpoint at ADDR1, and thus adjusts thread A's PC
to point at ADDR1 when it should not, and reports a breakpoint hit,
when thread A did not execute the instruction at ADDR1 at all.
The test added by this patch exercises exactly that.
I can't find any reason we'd need the "thread to be examined is still
the current thread" condition in adjust_pc_after_break, at least
nowadays; it might have made sense in the past. Best just remove it,
and rely on currently_stepping().
Here's the test's log of a run with an unpatched GDB:
35 while (1);
(gdb) PASS: gdb.threads/step-bg-decr-pc-switch-thread.exp: next over nop
next&
(gdb) PASS: gdb.threads/step-bg-decr-pc-switch-thread.exp: next& over inf loop
thread 1
[Switching to thread 1 (Thread 0x7ffff7fc2740 (LWP 29027))](running)
(gdb)
PASS: gdb.threads/step-bg-decr-pc-switch-thread.exp: switch to main thread
Breakpoint 2, thread_function (arg=0x0) at ...src/gdb/testsuite/gdb.threads/step-bg-decr-pc-switch-thread.c:34
34 NOP; /* set breakpoint here */
FAIL: gdb.threads/step-bg-decr-pc-switch-thread.exp: no output while stepping
gdb/ChangeLog:
2015-02-11 Pedro Alves <pedro@codesourcery.com>
* infrun.c (adjust_pc_after_break): Don't adjust the PC just
because the event thread is not the current thread.
gdb/testsuite/ChangeLog:
2015-02-11 Pedro Alves <pedro@codesourcery.com>
* gdb.threads/step-bg-decr-pc-switch-thread.c: New file.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: New file.
This patch fixes a pair of TUI issues related to screen resizing:
1. In tui_handle_resize_during_io(), when the TUI screen gets resized,
we fail to update GDB's idea about the height of the output window.
You can see this bug by doing:
a. Enter TUI mode.
b. "show height"
c. Resize the terminal.
d. "show height"
And observe that despite resizing the terminal, the reported height
remains unchanged. Note that a similar issue exists in the CLI.
The fix for this is simple: call tui_update_gdb_sizes() after performing
a resize, so that the "height" variable remains consistent with the
height of TUI's output window.
2. In tui_enable(), the call to tui_update_gdb_sizes() may clobber
readline's idea of the actual screen dimensions, and a subsequent
pending resize will use bogus terminal dimensions.
You can see this bug by doing:
a. Enter TUI mode.
b. Exit TUI mode.
c. Resize the terminal.
d. Enter TUI mode.
e. Press a key to resize the screen.
And observe that the terminal gets incorrectly resized to the wrong
dimensions. To fix this issue, we should oppurtunistically resize the
screen in tui_enable(). That way we eliminate the possibility of a
pending resize triggering right after we call tui_update_gdb_sizes().
gdb/ChangeLog:
* tui/tui-io.c (tui_handle_resize_during_io): Call
tui_update_gdb_sizes() after resizing the screen.
* tui/tui.c (tui_enable): Resize the terminal before
calling tui_update_gdb_sizes().
If we submit a command while the prompt cursor is somewhere other than
at the end of the command line, the command line gets truncated as the
command window gets shifted one line up. This happens because we fail
to properly move the cursor to the end of the command line before
transmitting the newline to ncurses. We need to move the cursor because
when ncurses outputs a newline it truncates any text that appears
past the end of the cursor.
The fix is generic enough to work properly even in multi-line secondary
prompts like the quit prompt.
gdb/ChangeLog:
* tui/tui-io.c (tui_getc): Move cursor to the end of the command
line before printing a newline.
Some local changes I was working on related to SIGTRAP handling
resulted in "signal SIGTRAP" no longer passing the SIGTRAP to the
inferior.
Surprisingly, only annota1.exp catches this. This commit adds a test
that doesn't rely on annotations, so that at the point annotations are
finaly dropped, we still have this use case covered ...
This is a multi-threaded test to also exercise the case of first
needing to do a step-over before delivering the signal.
Tested on x86_64 Fedora 20, native, remote/extended-remote gdbserver.
gdb/testsuite/
2015-02-10 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-sigtrap.c: New file.
* gdb.threads/signal-sigtrap.exp: New file.
displaced_step_fixup takes an thread to work with, as argument. OTOH,
gdbarch_displaced_step_fixup fixes up the current thread. The former
calls the latter without making sure the current thread is the one
that was passed in. If it is not, then gdbarch_displaced_step_fixup
may e.g., try reading from a running thread, which doesn't work on
some targets, or worse, read memory from the wrong inferior and
succeed.
This is mostly a latent problem currently, as non-stop switches the
current thread to the event thread early in fetch_inferior_event.
Tested on x86_64 Fedora 20.
gdb/
2015-02-10 Pedro Alves <palves@redhat.com>
* infrun.c (displaced_step_fixup): Switch to the event thread
before calling gdbarch_displaced_step_fixup.
When gdbserver is called with --multi and attach has not been called yet
and tstart is called on the gdb client, gdbserver would crash.
This patch fixes gdbserver so that it returns E01 to the gdb client.
Also this patch adds a testcase to verify this bug named no-attach-trace.exp
gdb/gdbserver/ChangeLog:
PR breakpoints/15956
* tracepoint.c (cmd_qtinit): Add check for current_thread.
gdb/testsuite/ChangeLog:
* gdb.trace/no-attach-trace.c: New file.
* gdb.trace/no-attach-trace.exp: New file.
Modify the ARM prologue unwinder to use the stop_reason hook instead of
returning imprecise frame id's through the arm prologue this_id hook.
gdb/
2015-02-10 Luis Machado <lgustavo@codesourcery.com>
* arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
(arm_prologue_this_id): Move PC and SP limit checks to
arm_prologue_unwind_stop_reason.
(arm_prologue_unwind) <stop_reason> : Set to
arm_prologue_unwind_stop_reason.
DWARFv5 defines and GCC5 may output two new DW_LANG constants for the
Fortran 2003 and Fortran 2008 standards. Recognize both as variants of
language_fortran.
gdb/ChangeLog:
* dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
DW_LANG_Fortran08 as language_fortran.
http://dwarfstd.org/ShowIssue.php?issue=141121.1
We were comparing a pointer against a char on remote.c. 'dcb' filed a
bug to inform us about that. I pushed the following patch under the
obvious rule.
gdb/ChangeLog:
2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
PR remote/17946
* gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
of pointer against char.
Indicate gaps in the trace due to decode errors. Internally, a gap is
represented as a btrace function segment without instructions and with a
non-zero format-specific error code.
Show the gap when traversing the instruction or function call history.
Also indicate gaps in "info record".
It looks like this:
(gdb) info record
Active record target: record-btrace
Recording format: Branch Trace Store.
Buffer size: 64KB.
Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182).
(gdb) record function-call-history /cli
1 fib inst 1,9 at src/fib.c:9,14
2 fib inst 10,20 at src/fib.c:6,14
3 [decode error (1): instruction overflow]
4 fib inst 21,28 at src/fib.c:11,14
5 fib inst 29,33 at src/fib.c:6,9
(gdb) record instruction-history 20,22
20 0x000000000040062f <fib+47>: sub $0x1,%rax
[decode error (1): instruction overflow]
21 0x0000000000400613 <fib+19>: add $0x1,%rax
22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip)
(gdb)
Gaps are ignored during reverse execution and replay.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (ftrace_find_call): Skip gaps.
(ftrace_new_function): Initialize level.
(ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
(ftrace_new_switch): Update
level computation.
(ftrace_new_gap): New.
(ftrace_update_function): Create new function after gap.
(btrace_compute_ftrace_bts): Create gap on error.
(btrace_stitch_bts): Update parameters. Clear trace if it
becomes empty.
(btrace_stitch_trace): Update parameters. Update callers.
(btrace_clear): Reset the number of gaps.
(btrace_insn_get): Return NULL if the iterator points to a gap.
(btrace_insn_number): Return zero if the iterator points to a gap.
(btrace_insn_end): Allow gaps at the end.
(btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
(btrace_find_insn_by_number): Assert that the found iterator does
not point to a gap.
(btrace_call_next, btrace_call_prev): Assert that the last function
is not a gap.
* btrace.h (btrace_bts_error): New.
(btrace_function): Update comment.
(btrace_function) <insn, insn_offset, number>: Update comment.
(btrace_function) <errcode>: New.
(btrace_thread_info) <ngaps>: New.
(btrace_thread_info) <replay>: Update comment.
(btrace_insn_get): Update comment.
* record-btrace.c (btrace_ui_out_decode_error): New.
(record_btrace_info): Print number of gaps.
(btrace_insn_history, btrace_call_history): Call
btrace_ui_out_decode_error for gaps.
(record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
testsuite/
* gdb.btrace/buffer-size.exp: Update "info record" output.
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
Add a struct for identifying a processor and use it in linux-btrace.c when
identifying the processor we're running on.
We will need this feature for the new btrace format.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
* nat/linux-btrace.c: (btrace_this_cpu): New.
(cpu_supports_bts): Call btrace_this_cpu.
(intel_supports_bts): Add cpu parameter.
Add the instruction's size as well as a coarse classification to struct
btrace_insn. Use the information in ftrace_update_function and
ftrace_find_call.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* btrace.h (btrace_insn_class): New.
(btrace_insn) <size, iclass>: New.
* btrace.c (ftrace_find_call): Update parameters. Update users.
Use instruction classification.
(ftrace_new_return): Update parameters. Update users.
(ftrace_update_function): Update parameters. Update users. Use
instruction classification.
(ftrace_update_insns): Update parameters. Update users.
(ftrace_classify_insn): New.
(btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
TRY_CATCH around call to gdb_insn_length.
Pass thread_info instead of btrace_thread_info to btrace_compute_ftrace.
We will need the thread_info in subsequent patches.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
Update parameters. Update users.
Allow the size of the branch trace ring buffer to be defined by the
user. The specified buffer size will be used when BTS tracing is
enabled for new threads.
The obtained buffer size may differ from the requested size. The
actual buffer size for the current thread is shown in the "info record"
command.
Bigger buffers mean longer traces, but also longer processing time.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (parse_xml_btrace_conf_bts): Add size.
(btrace_conf_bts_attributes): New.
(btrace_conf_children): Add attributes.
* common/btrace-common.h (btrace_config_bts): New.
(btrace_config)<bts>: New.
(btrace_config): Update comment.
* nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
Use config.
* features/btrace-conf.dtd: Increment version. Add size
attribute to bts element.
* record-btrace.c (set_record_btrace_bts_cmdlist,
show_record_btrace_bts_cmdlist): New.
(record_btrace_adjust_size, record_btrace_print_bts_conf,
record_btrace_print_conf, cmd_set_record_btrace_bts,
cmd_show_record_btrace_bts): New.
(record_btrace_info): Call record_btrace_print_conf.
(_initialize_record_btrace): Add commands.
* remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
(remote_protocol_features): Add Qbtrace-conf:bts:size packet.
(btrace_sync_conf): Synchronize bts size.
(_initialize_remote): Add Qbtrace-conf:bts:size packet.
* NEWS: Announce new commands and new packets.
doc/
* gdb.texinfo (Branch Trace Configuration Format): Add size.
(Process Record and Replay): Describe new set|show commands.
(General Query Packets): Describe Qbtrace-conf:bts:size packet.
testsuite/
* gdb.btrace/buffer-size: New.
gdbserver/
* linux-low.c (linux_low_btrace_conf): Print size.
* server.c (handle_btrace_conf_general_set): New.
(hanle_general_set): Call handle_btrace_conf_general_set.
(handle_query): Report Qbtrace-conf:bts:size as supported.
Add a struct to describe the branch trace configuration and use it for
enabling branch tracing.
The user will be able to set configuration fields for each tracing format
to be used for new threads.
The actual configuration that is active for a given thread will be shown
in the "info record" command.
At the moment, the configuration struct only contains a format field
that is set to the only available format.
The format is the only configuration option that can not be set via set
commands. It is given as argument to the "record btrace" command when
starting recording.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (XMLFILES): Add btrace-conf.dtd.
* x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
(x86_linux_btrace_conf): New.
(x86_linux_create_target): Initialize to_btrace_conf.
* nat/linux-btrace.c (linux_enable_btrace): Update parameters.
Check format. Split into this and ...
(linux_enable_bts): ... this.
(linux_btrace_conf): New.
(perf_event_skip_record): Renamed into ...
(perf_event_skip_bts_record): ... this. Updated users.
(linux_disable_btrace): Split into this and ...
(linux_disable_bts): ... this.
(linux_read_btrace): Check format.
* nat/linux-btrace.h (linux_enable_btrace): Update parameters.
(linux_btrace_conf): New.
(btrace_target_info)<ptid>: Moved.
(btrace_target_info)<conf>: New.
(btrace_target_info): Split into this and ...
(btrace_tinfo_bts): ... this. Updated users.
* btrace.c (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
(btrace_conf_children, btrace_conf_attributes)
(btrace_conf_elements): New.
* btrace.h (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf): New.
* common/btrace-common.h (btrace_config): New.
* feature/btrace-conf.dtd: New.
* record-btrace.c (record_btrace_conf): New.
(record_btrace_cmdlist): New.
(record_btrace_enable_warn, record_btrace_open): Pass
&record_btrace_conf.
(record_btrace_info): Print recording format.
(cmd_record_btrace_bts_start): New.
(cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
(_initialize_record_btrace): Add "record btrace bts" subcommand.
Add "record bts" alias command.
* remote.c (remote_state)<btrace_config>: New.
(remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
(remote_protocol_features): Add qXfer:btrace-conf:read.
(remote_open_1): Call remote_btrace_reset.
(remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
(btrace_target_info)<conf>: New.
(btrace_sync_conf, btrace_read_config): New.
(remote_enable_btrace): Update parameters. Call btrace_sync_conf and
btrace_read_conf.
(remote_btrace_conf): New.
(init_remote_ops): Initialize to_btrace_conf.
(_initialize_remote): Add qXfer:btrace-conf packet.
* target.c (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
* target.h (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
(target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
(target_ops)<to_enable_btrace>: Update parameters and comment.
(target_ops)<to_btrace_conf>: New.
* target-delegates: Regenerate.
* target-debug.h (target_debug_print_const_struct_btrace_config_p)
(target_debug_print_const_struct_btrace_target_info_p): New.
NEWS: Announce new command and new packet.
doc/
* gdb.texinfo (Process Record and Replay): Describe the "record
btrace bts" command.
(General Query Packets): Describe qXfer:btrace-conf:read packet.
(Branch Trace Configuration Format): New.
gdbserver/
* linux-low.c (linux_low_enable_btrace): Update parameters.
(linux_low_btrace_conf): New.
(linux_target_ops)<to_btrace_conf>: Initialize.
* server.c (current_btrace_conf): New.
(handle_btrace_enable): Rename to ...
(handle_btrace_enable_bts): ... this. Pass ¤t_btrace_conf
to target_enable_btrace. Update comment. Update users.
(handle_qxfer_btrace_conf): New.
(qxfer_packets): Add btrace-conf entry.
(handle_query): Report qXfer:btrace-conf:read as supported packet.
* target.h (target_ops)<enable_btrace>: Update parameters and comment.
(target_ops)<read_btrace_conf>: New.
(target_enable_btrace): Update parameters.
(target_read_btrace_conf): New.
testsuite/
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
Collect perf event buffer related fields from btrace_target_info into
a new struct perf_event_buffer. Update functions that operated on the
buffer to take a struct perf_event_buffer pointer rather than a
btrace_target_info pointer.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* nat/linux-btrace.h (perf_event_buffer): New.
(btrace_target_info) <buffer, size, data_head>: Replace with ...
<bts>: ... this.
* nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
(perf_event_buffer_size, perf_event_buffer_begin)
(perf_event_buffer_end, linux_btrace_has_changed): Removed.
Updated users.
(perf_event_new_data): New.
Add a format argument to the various supports_btrace functions to check
for support of a specific btrace format. This is to prepare for a new
format.
Removed two redundant calls. The check will be made in the subsequent
btrace_enable call.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
* record-btrace.c (record_btrace_open): Remove call to
target_supports_btrace.
* remote.c (remote_supports_btrace): Update parameters.
* target.c (target_supports_btrace): Update parameters.
* target.h (to_supports_btrace, target_supports_btrace): Update
parameters.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_btrace_format): New.
* nat/linux-btrace.c
(kernel_supports_btrace): Rename into ...
(kernel_supports_bts): ... this. Update users. Update warning text.
(intel_supports_btrace): Rename into ...
(intel_supports_bts): ... this. Update users.
(cpu_supports_btrace): Rename into ...
(cpu_supports_bts): ... this. Update users.
(linux_supports_btrace): Update parameters. Split into this and ...
(linux_supports_bts): ... this.
* nat/linux-btrace.h (linux_supports_btrace): Update parameters.
gdbserver/
* server.c (handle_btrace_general_set): Remove call to
target_supports_btrace.
(supported_btrace_packets): New.
(handle_query): Call supported_btrace_packets.
* target.h: include btrace-common.h.
(btrace_target_info): Removed.
(supports_btrace, target_supports_btrace): Update parameters.
Add a structure to hold the branch trace data and an enum to describe
the format of that data. So far, only BTS is supported. Also added
a NONE format to indicate that no branch trace data is available.
This will make it easier to support different branch trace formats in
the future.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (SFILES): Add common/btrace-common.c.
(COMMON_OBS): Add common/btrace-common.o.
(btrace-common.o): Add build rules.
* btrace.c (parse_xml_btrace): Update parameters.
(parse_xml_btrace_block): Set format field.
(btrace_add_pc, btrace_fetch): Use struct btrace_data.
(do_btrace_data_cleanup, make_cleanup_btrace_data): New.
(btrace_compute_ftrace): Split into this and...
(btrace_compute_ftrace_bts): ...this.
(btrace_stitch_trace): Split into this and...
(btrace_stitch_bts): ...this.
* btrace.h (parse_xml_btrace): Update parameters.
(make_cleanup_btrace_data): New.
* common/btrace-common.c: New.
* common/btrace-common.h: Include common-defs.h.
(btrace_block_s): Update comment.
(btrace_format): New.
(btrace_format_string): New.
(btrace_data_bts): New.
(btrace_data): New.
(btrace_data_init, btrace_data_fini, btrace_data_empty): New.
* remote.c (remote_read_btrace): Update parameters.
* target.c (target_read_btrace): Update parameters.
* target.h (target_read_btrace): Update parameters.
(target_ops)<to_read_btrace>: Update parameters.
* x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
* target-delegates.c: Regenerate.
* target-debug (target_debug_print_struct_btrace_data_p): New.
* nat/linux-btrace.c (linux_read_btrace): Split into this and...
(linux_read_bts): ...this.
* nat/linux-btrace.h (linux_read_btrace): Update parameters.
gdbserver/
* Makefile.in (SFILES): Add common/btrace-common.c.
(OBS): Add common/btrace-common.o.
(btrace-common.o): Add build rules.
* linux-low: Include btrace-common.h.
(linux_low_read_btrace): Use struct btrace_data. Call
btrace_data_init and btrace_data_fini.
Add a bit of debug output that made things a bit easier for me before.
gdb/
2015-02-06 Pedro Alves <palves@redhat.com>
* linux-thread-db.c (find_new_threads_callback): Add debug output.
gdb/gdbserver/
2015-02-06 Pedro Alves <palves@redhat.com>
* thread-db.c (find_new_threads_callback): Add debug output.
Typing "enable count" by itself crashes GDB. Also, if you omit the
breakpoint number/range, the error message is not very clear:
(gdb) enable count 2
warning: bad breakpoint number at or near ''
(gdb) enable count
Segmentation fault (core dumped)
With this patch, the error messages are slightly more helpful:
(gdb) enable count 2
Argument required (one or more breakpoint numbers).
(gdb) enable count
Argument required (hit count).
gdb/ChangeLog:
PR gdb/15678
* breakpoint.c (map_breakpoint_numbers): Check for empty args
string.
(enable_count_command): Check args for NULL value.
gdb/testsuite/ChangeLog:
PR gdb/15678
* gdb.base/ena-dis-br.exp: Test "enable count" for bad user input.
The buildbot shows that this test is still racy, and occasionally
fails with time outs on some machines. I'd like to get major issues
with load out of the way.
The test currently exits after 180s, which is just a random number,
that has no relation to what the .exp file considers a time out. This
commit makes the program wait a bit longer than what the .exp file
considers a time out, and, resets the timer for each iteration.
Tested on x86_64 Fedora 20, native and extended-remote gdbserver.
gdb/testsuite/
2015-02-06 Pedro Alves <palves@redhat.com>
* gdb.threads/attach-many-short-lived-threads.c (SECONDS): New
macro.
(seconds_left, again): New globals.
(main): Wait seconds_left in a 1-second sleep loop instead of
sleeping 180 seconds. If 'again' is set, reset the seconds
counter.
* gdb.threads/attach-many-short-lived-threads.exp (test): Set
'again' in the inferior before detaching. Print the seconds left.
(options): New global.
(top level): Build program with -DTIMEOUT=$timeout.
The buildbot shows that some machines FAIL this test frequently.
E.g.: https://sourceware.org/ml/gdb-testers/2015-q1/msg00997.html
If I stress my machine, I can sometimes see it fail too.
Bumping the 200 limit and tweaking the test to show the step count, I
get:
...
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 12 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 8 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 13 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 7 times
--> FAIL: gdb.base/gdb-sigterm.exp: SIGTERM stepped 228 times <--
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 11 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 13 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 12 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 8 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 9 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 7 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 11 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 8 times
...
Thinking that this might be a problem of SIGTERM reaching GDB, but
then the event loop taking too long to handle it, I hacked GDB to
print a debug log whenever the SIGTERM handler was called, and,
whenever the event loop finally calls the async SIGTERM handler.
Here's what I see:
infrun: 30011 [Thread 30011],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x4005de
--> infrun: got SIGTERM <--
infrun: stepping inside range [0x4005de-0x4005e0]
infrun: resume (step=1, signal=GDB_SIGNAL_0), ...
infrun: prepare_to_wait
--> infrun: handling async SIGTERM <--
Cannot execute this command while the target is running.
Use the "interrupt" command to stop the target
and then try again.
gdb.base/gdb-sigterm.exp: expect eof #27
FAIL: gdb.base/gdb-sigterm.exp: SIGTERM stepped 228 times
So, no delay on the GDB side. It just happens that occasionally it
takes more than 200 single-steps before SIGTERM even reaches GDB.
This just looks like a kernel/scheduling issue --- some extra usage
spike in the system (e.g., an I/O spike) might cause it for me. For
the build slaves, I'm guessing they're frequently busy enough to trip
on this often. Particularly more so now that we're having them run
tests in parallel mode.
The fix is to detect failure by timeout instead of counting single
steps. This should be more reliable. Indeed for me, after this
commit, I couldn't trigger a FAIL anymore, even after letting the test
run for an hour.
By timeout is also nicer in that a board file for a slow host/target
can increase it (like, e.g., an embedded GNU/Linux board).
Tested on x86_64 Fedora 20, native, gdbserver, and extended-remote
gdbserver.
gdb/testsuite/
2015-02-06 Pedro Alves <palves@redhat.com>
* gdb.base/gdb-sigterm.c (main): Use the TIMEOUT define to
determine how many seconds to pass to 'alarm'.
* gdb.base/gdb-sigterm.exp (top level): Build program with
-DTIMEOUT=$timeout.
(do_test): Return success/failure indication. Add more verbose
logging. Don't fail if 200 single steps are seen. Instead, fail
when the test times out.
(passes): New global.
(top level): Break the testing loop if testing fails on any
iteration. Use gdb_assert.
This commit modifies the test program gdb.base/info-os.c so that
it cleans up all allocated System V IPC objects when a fatal
error occurs. Without this, it was possible for the program
to leave IPC objects on the system, and such objects persist
until they are manually deleted or the system reboots.
I looked at changing the SysV IPC key for allocating the IPC objects to
IPC_PRIVATE. That would prevent errors due to namespace conflicts with the
key. However, the test needs to read the actual key number from the 'info
os' command output, and IPC_PRIVATE won't work for that.
gdb/testsuite/ChangeLog:
2015-02-04 Don Breazeal <donb@codesourcery.com>
* gdb.base/info-os.c (shmid, semid, msqid): Make variables static
and initialize them.
(ipc_cleanup): New function.
(main): Don't declare shmid, semid, and msqid. Add a call to
atexit so that we call ipc_cleanup on exit.
on Fedora Rawhide (==22) i686 using --with-python=/usr/bin/python3 one gets:
./python/py-value.c:1696:3: error: initialization from incompatible pointer type [-Werror]
valpy_hash, /*tp_hash*/
^
./python/py-value.c:1696:3: error: (near initialization for ‘value_object_type.tp_hash’) [-Werror]
cc1: all warnings being treated as errors
Makefile:2628: recipe for target 'py-value.o' failed
This is because in Python 2 tp_hash was:
typedef long (*hashfunc)(PyObject *);
while in Python 3 tp_hash is:
typedef Py_hash_t (*hashfunc)(PyObject *);
Py_hash_t is int for 32-bit hosts and long for 64-bit hosts. While on 32-bit
hosts sizeof(long)==sizeof(int) still the hashfunc type is formally
incompatible. As this patch should have no compiled code change it is not
really necessary for gdb-7.9, it would fix there just this non-fatal
compilation warning:
./python/py-value.c:1696:3: warning: initialization from incompatible pointer type
valpy_hash, /*tp_hash*/
^
./python/py-value.c:1696:3: warning: (near initialization for ‘value_object_type.tp_hash’)
gdb/ChangeLog
2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
* python/python-internal.h (Py_hash_t): Define it for Python <3.2.
* python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
return type.
Since the starvation avoidance series
(https://sourceware.org/ml/gdb-patches/2014-12/msg00631.html), both
GDB and GDBserver pull all events out of ptrace before deciding which
event to process.
There's one problem with that though. Because we resume new threads
immediately when we see a PTRACE_EVENT_CLONE event, if the program
constantly spawns threads fast enough, new threads can spawn threads
faster we can pull events out of the kernel, and thus we'd get stuck
in an infinite loop, never returning any event to the core to process.
I occasionally see this happen with the
attach-many-short-lived-threads.exp test against gdbserver.
The fix is to delay resuming new threads until we've pulled out all
events out of the kernel.
On native, we already have the resume_stopped_resumed_lwps function
that knows to resume LWPs that are stopped with no event to report to
the core. So the patch just adds another use. GDBserver didn't have
the equivalent yet, so the patch adds one.
Tested on x86_64 Fedora 20, native and gdbserver (remote and
extended-remote).
gdb/gdbserver/ChangeLog:
2015-02-04 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Don't resume LWPs here.
(resume_stopped_resumed_lwps): New function.
(linux_wait_for_event_filtered): Use it.
gdb/ChangeLog:
2015-02-04 Pedro Alves <palves@redhat.com>
* linux-nat.c (handle_extended_wait): Don't resume LWPs here.
(wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
returns true.
(resume_stopped_resumed_lwps): Don't check whether the thread is
marked as executing.
(linux_nat_wait_1): Use resume_stopped_resumed_lwps.
Running the testsuite with the native-extended-gdbserver.exp board and
passing a variant spec, like
make check RUNTESTFLAGS="--target_board=native-extended-gdbserver/-m32"
results in dejagnu trying to open a rsh connection to
"native-extended-gdbserver", which of course is wrong. The point of
this board is running things locally.
The issue is that the native-extended-gdbserver board does not clear
the "isremote" flag properly.
Reported by Sergio at:
https://sourceware.org/ml/gdb-patches/2015-02/msg00067.html
testsuite/
2015-02-04 Pedro Alves <palves@redhat.com>
* boards/native-extended-gdbserver.exp: Remove any target variant
specifications from the board name before clearing the isremote
flag from board_info.
When reading a core file register section which is larger than
expected, emit a warning. Assume that a register section usually has
exactly the size specified by the regset section iterator. In some
special cases this assumption is wrong, or at least does not match the
regset supply function's logic. Thus also add a way to suppress the
warning in those cases, using a new flag REGSET_VARIABLE_SIZE.
gdb/ChangeLog:
* regset.h (struct regset): Add flags field.
(REGSET_VARIABLE_SIZE): New value for a regset's flags field.
* corelow.c (get_core_register_section): Add warning if the size
exceeds the requested size and the regset does not have the
REGSET_VARIABLE_SIZE flag set.
* alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
flag.
* armbsd-tdep.c (armbsd_gregset): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
* hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
* m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
When reading the XSAVE extended state from an i386 or AMD64 core file,
the respective regset iterator requests a minimum section size of
zero. Since the respective regset supply function does not check the
size either, this may lead to accessing data out of range if the
section is too short.
In write mode, the iterator always uses the maximum supported size for
the XSAVE extended state.
This is now changed such that the iterator always requests the
expected size of this section based on xcr0, both for reading and
writing.
gdb/ChangeLog:
* amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
For ".reg-xstate", explicitly specify the requested section size
via X86_XSTATE_SIZE instead of just 0 on input and
X86_XSTATE_MAX_SIZE on output.
* i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
Likewise.
As reported in PR 17808, a test case with a forged (invalid) core file
can crash GDB with an assertion failure. In that particular case the
prstatus of an i386 core file looks like that from an AMD64 core file.
Consequently the respective regset supply function i386_supply_gregset
is invoked with a larger buffer than usual. But i386_supply_gregset
asserts a specific buffer size, and this assertion fails.
The patch relaxes all buffer size assertions in regset supply
functions such that they merely check for a sufficiently large buffer.
For consistency the regset collect functions are adjusted as well.
gdb/ChangeLog:
PR corefiles/17808:
* gdbarch.sh (iterate_over_regset_sections_cb): Document this
function type, particularly its SIZE parameter.
* gdbarch.h: Regenerate.
* amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
actual against required size using ">=" instead of "==".
(amd64_collect_fpregset): Likewise.
* i386-tdep.c (i386_supply_gregset): Likewise.
(i386_collect_gregset): Likewise.
(i386_supply_fpregset): Likewise.
(i386_collect_fpregset): Likewise.
* mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
(mips_fill_gregset_wrapper): Likewise.
(mips_supply_fpregset_wrapper): Likewise.
(mips_fill_fpregset_wrapper): Likewise.
(mips64_supply_gregset_wrapper): Likewise.
(mips64_fill_gregset_wrapper): Likewise.
(mips64_supply_fpregset_wrapper): Likewise.
(mips64_fill_fpregset_wrapper): Likewise.
* mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
(am33_supply_fpregset_method): Likewise.
(am33_collect_gregset_method): Likewise.
(am33_collect_fpregset_method): Likewise.
In the TUI mode, we call wrefresh after outputting every single
character. This results in the I/O becoming very slow. Fix this by
delaying refreshing the console window until an explicit flush of
gdb_stdout is requested, or a write to any other (unbuffered) file is
done.
2015-02-04 Doug Evans <dje@google.com>
Pedro Alves <palves@redhat.com>
Eli Zaretskii <eliz@gnu.org>
PR tui/17810
* tui/tui-command.c (tui_refresh_cmd_win): New function.
* tui/tui-command.c (tui_refresh_cmd_win): Declare.
* tui/tui-file.c: #include tui/tui-command.h.
(tui_file_fputs): Refresh command window if stream is not gdb_stdout.
(tui_file_flush): Refresh command window if stream is gdb_stdout.
* tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
commit 70b66289 (Simplify event-loop core, remove two-step event
processing) causes a build failure when compiling GDB with gcc/-O2:
gdb/event-loop.c: In function ‘gdb_do_one_event’:
gdb/event-loop.c:296:10: error: ‘res’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
if (res > 0)
^
GCC isn't realizing that event_source_head can never be > 2 and that
therefore 'res' is always initialized in all possible paths. Adding a
default case that internal_error's makes GCC realize that.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-02-04 Pedro Alves <palves@redhat.com>
Fix build breakage.
* event-loop.c (gdb_do_one_event): Add default switch case.
With global system gcc-5.0 if one also installs ccache (needing a different
patch
https://bugzilla.samba.org/show_bug.cgi?id=11060
for -fplugin=libcc1plugin) it breaks as GDB will read from inferior
DW_AT_producer containing -fpreprocessed (due to ccache used to compile the
inferior).
<c> DW_AT_producer : (indirect string, offset: 0x52): GNU C11 5.0.0 20150114 (Red Hat 5.0.0-0.1) -fpreprocessed -mtune=generic -
march=x86-64 -g
It is wrong that gcc puts -fpreprocessed into DW_AT_producer - fixed it in
trunk GCCs:
https://gcc.gnu.org/ml/gcc-patches/2015-01/msg01495.html
But even with that fix there are already built inferiors out there which GDB
could be compatible (for the 'compile' mode) with.
gdb/ChangeLog
2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
Filter out inferior gcc option -fpreprocessed.
* compile/compile.c (filter_args): New function.
(get_args): Use it.
Even with the previous patch installed, we'll still see
sigall-reverse.exp occasionally fail. The problem is that the event
loop's event handling processing is done in two steps:
#1 - poll all event sources, and push new event objects to the event
queue, until all event sources are drained.
#2 - go through the event queue, processing each event object at a
time. For each event, call the associated callback, and deletes the
event object from the queue.
and then bad things happen if between #1 and #2 something decides that
events from an event source that has already queued events shouldn't
be processed yet. To do that, we either remove the event source from
the list of event sources, or clear its "have events" flag. However,
if an event for that source has meanwhile already been pushed in the
event queue, #2 will still process it and call the associated
callback...
One way to fix it that I considered was to do something to the event
objects already in the event queue when an event source is no longer
interesting. But then I couldn't find any good reason for the
two-step process in the first place. It's much simpler (and less
code) to call the event source callbacks as we poll the sources and
find events.
Tested on x86-64 Fedora 20, native and gdbserver.
gdb/
2015-02-03 Pedro Alves <palves@redhat.com>
* event-loop.c: Don't declare nor define a queue type for
gdb_event_p.
(event_queue): Delete.
(create_event, create_file_event, gdb_event_xfree)
(initialize_event_loop, process_event): Delete.
(gdb_do_one_event): Return as soon as one event is handled.
(handle_file_event): Change prototype. Used the passed in
file_handler pointer and ready_mask instead of looping over all
file handlers.
(gdb_wait_for_event): Update the poll/select timeouts before
blocking. Run event handlers directly instead of queueing events.
Return as soon as one event is handled.
(struct async_event_handler_data): Delete.
(invoke_async_event_handler): Delete.
(check_async_event_handlers): Change return type to int. Run
event handlers directly instead of queueing events. Return as
soon as one event is handled.
(handle_timer_event): Delete.
(update_wait_timeout): New function, factored out from
poll_timers.
(poll_timers): Reimplement.
* event-loop.h (initialize_event_loop): Delete declaration.
* top.c (gdb_init): Don't call initialize_event_loop.
The sigall-reverse.exp test occasionally fails with something like this:
(gdb) PASS: gdb.reverse/sigall-reverse.exp: send signal TERM
continue
Continuing.
The next instruction is syscall exit_group. It will make the program exit. Do you want to stop the program?([y] or n) FAIL: gdb.reverse/sigall-reverse.exp: continue to signal exit (timeout)
FAIL: gdb.reverse/sigall-reverse.exp: reverse to handler of TERM (timeout)
FAIL: gdb.reverse/sigall-reverse.exp: reverse to gen_TERM (timeout)
This is another event-loop/async related problem exposed by the patch
that made 'query' use gdb_readline_wrapper (588dcc3edb).
The problem is that even though gdb_readline_wrapper disables
target-async while the secondary prompt is in progress, the record
target's async event source is left marked. So when
gdb_readline_wrapper nests an event loop to process input, it may
happen that that event loop ends up processing a target event while
GDB is not really ready for it. Here's the relevant part of the
backtrace showing the root issue in action:
...
#14 0x000000000061cb48 in fetch_inferior_event (client_data=0x0) at src/gdb/infrun.c:4158
#15 0x0000000000642917 in inferior_event_handler (event_type=INF_REG_EVENT, client_data=0x0) at src/gdb/inf-loop.c:57
#16 0x000000000077ca5c in record_full_async_inferior_event_handler (data=0x0) at src/gdb/record-full.c:791
#17 0x0000000000640fdf in invoke_async_event_handler (data=...) at src/gdb/event-loop.c:1067
#18 0x000000000063fb01 in process_event () at src/gdb/event-loop.c:339
#19 0x000000000063fb2a in gdb_do_one_event () at src/gdb/event-loop.c:360
#20 0x000000000074d607 in gdb_readline_wrapper (prompt=0x3588f40 "The next instruction is syscall exit_group. It will make the program exit. Do you want to stop the program?([y] or n) ") at src/gdb/top.c:842
#21 0x0000000000750bd9 in defaulted_query (ctlstr=0x8c6588 "The next instruction is syscall exit_group. It will make the program exit. Do you want to stop the program?", defchar=121 'y', args=0x7fff70524410) at src/gdb/utils.c:1279
#22 0x0000000000750e4c in yquery (ctlstr=0x8c6588 "The next instruction is syscall exit_group. It will make the program exit. Do you want to stop the program?") at src/gdb/utils.c:1358
#23 0x00000000004b020e in record_linux_system_call (syscall=gdb_sys_exit_group, regcache=0x3529450, tdep=0xd6c840 <amd64_linux_record_tdep>) at src/gdb/linux-record.c:1933
With my all-stop-on-top-of-non-stop series, I'm also seeing
gdb.server/ext-attach.exp fail occasionally due to the same issue.
The first part of the fix is for target_async implementations to make
sure to remove/unmark all target-related event sources from the event
loop.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2015-02-03 Pedro Alves <palves@redhat.com>
* event-loop.c (clear_async_event_handler): New function.
* event-loop.h (clear_async_event_handler): New declaration.
* record-btrace.c (record_btrace_async): New function.
(init_record_btrace_ops): Install record_btrace_async.
* record-full.c (record_full_async): New function.
(record_full_resume): Don't mark the async event source here.
(init_record_full_ops): Install record_full_async.
(record_full_core_resume): Don't mark the async event source here.
(init_record_full_core_ops): Install record_full_async.
* remote.c (remote_async): Mark and clear the async stop reply
queue event-loop token as appropriate.
In all these cases we're interested in whether the target is currently
async, with its event sources installed in the event loop, not whether
it can async if needed. Also, I'm not seeing the point of the
target_async call from within linux_nat_wait. That's normally done on
resume instead, which this target already does.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2015-02-03 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
target_is_async_p instead of target_can_async.
(linux_nat_wait): Use target_is_async_p instead of
target_can_async. Don't enable async here.
* remote.c (interrupt_query, remote_wait, putpkt_binary): Use
target_is_async_p instead of target_can_async.
This is the result of a little bit of investigation of the C and Ada
languages, as well as some common sense.
gdb/ChangeLog:
* varobj.h (lang_varobj_ops): Mention which return values need
to be freed.
When ada-lang.c:ada_lookup_symbol_list_worker finds a match in
the symbol cache, it caches the result again, which is unecessary.
This patch fixes the code to avoid that.
gdb/ChangeLog:
PR gdb/17856:
* ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
results found in the cache.
Tested on x86_64-linux, no regression.
The Ada symbol cache has been designed to have one instance of that
of that cache per program space, and for each instance to be created
on-demand. ada_get_symbol_cache is the function responsible for both
lookup and creation on demand.
Unfortunately, ada_get_symbol_cache forgot to store the reference
to newly created caches, thus causing it to:
- Leak old caches;
- Allocate a new cache each time the cache is being searched or
a new entry is to be inserted.
This patch fixes the issue by avoiding the use of the local variable,
which indirectly allowed the bug to happen. We manipulate the reference
in the program-space data instead.
gdb/ChangeLog:
PR gdb/17854:
* ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
when allocating a new one.
Every type has to pay the price in memory usage for their presence.
The proper place for them is in the type_specific field which exists
for this purpose.
gdb/ChangeLog:
* dwarf2read.c (process_structure_scope): Update setting of
TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
* gdbtypes.c (internal_type_vptr_fieldno): New function.
(set_type_vptr_fieldno): New function.
(internal_type_vptr_basetype): New function.
(set_type_vptr_basetype): New function.
(get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
TYPE_VPTR_BASETYPE.
(allocate_cplus_struct_type): Initialize vptr_fieldno.
(recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
(print_cplus_stuff): ... moved here.
(copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
* gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
moved to ...
(struct cplus_struct_type): ... here. All uses updated.
(TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
(internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
(internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
* stabsread.c (read_tilde_fields): Update setting of
TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp <maint print type argc>: Update expected output.
This patch moves TYPE_SELF_TYPE into new field type_specific.self_type
for MEMBERPTR,METHODPTR types, and into type_specific.func_stuff
for METHODs, and then updates everything to use that.
TYPE_CODE_METHOD could share some things with TYPE_CODE_FUNC
(e.g. TYPE_NO_RETURN) and it seemed simplest to keep them together.
Moving TYPE_SELF_TYPE into type_specific.func_stuff for TYPE_CODE_METHOD
is also nice because when we allocate space for function types we assume
they're TYPE_CODE_FUNCs. If TYPE_CODE_METHODs don't need or use that
space then that space would be wasted, and cleaning that up would involve
more invasive changes.
In order to catch errant uses I've added accessor functions
that do some checking.
One can no longer assign to TYPE_SELF_TYPE like this:
TYPE_SELF_TYPE (foo) = bar;
One instead has to do:
set_type_self_type (foo, bar);
But I've left reading of the type to the macro:
bar = TYPE_SELF_TYPE (foo);
In order to discourage bypassing the TYPE_SELF_TYPE macro
I've named the underlying function that implements it
internal_type_self_type.
While testing this I found the stabs reader leaving methods
as TYPE_CODE_FUNCs, hitting my newly added asserts.
Since the dwarf reader smashes functions to methods (via
smash_to_method) I've done a similar thing for stabs.
gdb/ChangeLog:
* cp-valprint.c (cp_find_class_member): Rename parameter domain_p
to self_p.
(cp_print_class_member): Rename local domain to self_type.
* dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
domain_type to self_type.
(set_die_type) <need_gnat_info>: Handle
TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
* gdb-gdb.py (StructMainTypePrettyPrinter): Handle
TYPE_SPECIFIC_SELF_TYPE.
* gdbtypes.c (internal_type_self_type): New function.
(set_type_self_type): New function.
(smash_to_memberptr_type): Rename parameter domain to self_type.
Update setting of TYPE_SELF_TYPE.
(smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
(smash_to_method_type): Rename parameter domain to self_type.
Update setting of TYPE_SELF_TYPE.
(check_stub_method): Call smash_to_method_type.
(recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
(copy_type_recursive): Ditto.
* gdbtypes.h (enum type_specific_kind): New value
TYPE_SPECIFIC_SELF_TYPE.
(struct main_type) <type_specific>: New member self_type.
(struct cplus_struct_type) <fn_field.type>: Update comment.
(TYPE_SELF_TYPE): Rewrite.
(internal_type_self_type, set_type_self_type): Declare.
* gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
self_type.
(gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
* m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
TYPE_TARGET_TYPE.
* stabsread.c (read_member_functions): Mark methods with
TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
TYPE_SELF_TYPE.
gdb/ChangeLog:
* gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
or unions. Return zero if union.
(gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
(gnuv3_rtti_type): Pass already-check_typedef'd value to
gnuv3_get_vtable.
(compute_vtable_size): Assert only passed structs.
(gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
This commit adds a new exception, MAX_COMPLETIONS_REACHED_ERROR, to be
thrown whenever the completer has generated too many candidates to
be useful. A new user-settable variable, "max_completions", is added
to control this behaviour. A top-level completion limit is added to
complete_line_internal, as the final check to ensure the user never
sees too many completions. An additional limit is added to
default_make_symbol_completion_list_break_on, to halt time-consuming
symbol table expansions.
gdb/ChangeLog:
PR cli/9007
PR cli/11920
PR cli/15548
* cli/cli-cmds.c (complete_command): Notify user if max-completions
reached.
* common/common-exceptions.h (enum errors)
<MAX_COMPLETIONS_REACHED_ERROR>: New value.
* completer.h (get_max_completions_reached_message): New declaration.
(max_completions): Likewise.
(completion_tracker_t): New typedef.
(new_completion_tracker): New declaration.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completion_enum): New enum.
(maybe_add_completion): New declaration.
(throw_max_completions_reached_error): Likewise.
* completer.c (max_completions): New global variable.
(new_completion_tracker): New function.
(free_completion_tracker): Likewise.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completions): Likewise.
(throw_max_completions_reached_error): Likewise.
(complete_line): Remove duplicates and limit result to max_completions
entries.
(get_max_completions_reached_message): New function.
(gdb_display_match_list): Handle max_completions.
(_initialize_completer): New declaration and function.
* symtab.c: Include completer.h.
(completion_tracker): New static variable.
(completion_list_add_name): Call maybe_add_completion.
(default_make_symbol_completion_list_break_on_1): Renamed from
default_make_symbol_completion_list_break_on. Maintain
completion_tracker across calls to completion_list_add_name.
(default_make_symbol_completion_list_break_on): New function.
* top.c (init_main): Set rl_completion_display_matches_hook.
* tui/tui-io.c: Include completer.h.
(tui_old_rl_display_matches_hook): New static global.
(tui_rl_display_match_list): Notify user if max-completions reached.
(tui_setup_io): Save/restore rl_completion_display_matches_hook.
* NEWS (New Options): Mention set/show max-completions.
gdb/doc/ChangeLog:
* gdb.texinfo (Command Completion): Document new
"set/show max-completions" option.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Disable completion limiting for
existing tests. Add new tests to check completion limiting.
* gdb.linespec/ls-errs.exp: Disable completion limiting.
This commit makes default_make_symbol_completion_list_break_on build
the list of completions as it expands the necessary symbol tables,
rather than expanding all necessary symbol tables first and then
building the completion lists second. This allows for the early
termination of symbol table expansion if required.
gdb/ChangeLog:
* symtab.c (struct add_name_data) <code>: New field.
Updated comments.
(add_symtab_completions): New function.
(symtab_expansion_callback): Likewise.
(default_make_symbol_completion_list_break_on): Set datum.code.
Move minimal symbol scan before calling expand_symtabs_matching.
Scan known primary symtabs for externs and statics before calling
expand_symtabs_matching. Pass symtab_expansion_callback as
expansion_notify argument to expand_symtabs_matching. Do not scan
primary symtabs for externs and statics after calling
expand_symtabs_matching.
This commit adds a new callback parameter, "expansion_notify", to the
top-level expand_symtabs_matching function and to all the vectorized
functions it defers to. If expansion_notify is non-NULL, it will be
called every time a symbol table is expanded.
gdb/ChangeLog:
* symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
(struct quick_symbol_functions) <expand_symtabs_matching>:
New argument expansion_notify. All uses updated.
(expand_symtabs_matching): New argument expansion_notify.
All uses updated.
* symfile-debug.c (debug_qf_expand_symtabs_matching):
Also print expansion notify.
* symtab.c (expand_symtabs_matching_via_partial): Call
expansion_notify whenever a partial symbol table is expanded.
* dwarf2read.c (dw2_expand_symtabs_matching): Call
expansion_notify whenever a symbol table is instantiated.
This copies a lot of code from readline, but this is temporary.
Readline currently doesn't export what we need.
The plan is to have something that has been working for awhile,
and then we'll have a complete story to present to the readline
maintainers.
gdb/ChangeLog:
* cli-out.c: #include completer.h, readline/readline.h.
(cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
(cli_mld_flush, cld_mld_erase_entire_line): Ditto.
(cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
* cli-out.h (cli_display_match_list): Declare.
* completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
(ELLIPSIS_LEN): Ditto.
(gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
(gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
(gdb_fnprint, gdb_print_filename): Ditto.
(gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
(gdb_display_match_list): Ditto.
* completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
(mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
(mld_beep_ftype, mld_read_key_ftype): Ditto.
(match_list_displayer): New struct.
(gdb_display_match_list): Declare.
* top.c (init_main): Set rl_completion_display_matches_hook.
* tui/tui-io.c: #include completer.h.
(printable_part, PUTX, print_filename, get_y_or_n): Delete.
(tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
(tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
(tui_mld_getc, tui_mld_read_key): Ditto.
(tui_rl_display_match_list): Rewrite.
(tui_handle_resize_during_io): New arg for_completion. All callers
updated.
gdb/ChangeLog:
Add symbol lookup cache.
* NEWS: Document new options and commands.
* symtab.c (symbol_cache_key): New static global.
(DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
(SYMBOL_LOOKUP_FAILED): New macro.
(symbol_cache_slot_state): New enum.
(block_symbol_cache): New struct.
(symbol_cache): New struct.
(new_symbol_cache_size, symbol_cache_size): New static globals.
(hash_symbol_entry, eq_symbol_entry): New functions.
(symbol_cache_byte_size, resize_symbol_cache): New functions.
(make_symbol_cache, free_symbol_cache): New functions.
(get_symbol_cache, symbol_cache_cleanup): New function.
(set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
(symbol_cache_lookup, symbol_cache_clear_slot): New function.
(symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
(symbol_cache_flush, symbol_cache_dump): New functions.
(maintenance_print_symbol_cache): New function.
(maintenance_flush_symbol_cache): New function.
(symbol_cache_stats): New function.
(maintenance_print_symbol_cache_statistics): New function.
(symtab_new_objfile_observer): New function.
(symtab_free_objfile_observer): New function.
(lookup_static_symbol, lookup_global_symbol): Use symbol cache.
(_initialize_symtab): Init symbol_cache_key. New parameter
maint symbol-cache-size. New maint commands print symbol-cache,
print symbol-cache-statistics, flush-symbol-cache.
Install new_objfile, free_objfile observers.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new commands
"maint print symbol-cache", "maint print symbol-cache-statistics",
"maint flush-symbol-cache". Document new option
"maint set symbol-cache-size".
gdb/
2015-01-31 Eli Zaretskii <eliz@gnu.org>
* tui/tui-io.c (tui_expand_tabs): New function.
(tui_puts, tui_redisplay_readline): Expand TABs into the
appropriate number of spaces.
* tui/tui-regs.c: Include tui-io.h.
(tui_register_format): Call tui_expand_tabs to expand TABs into
the appropriate number of spaces.
* tui/tui-io.h: Add prototype for tui_expand_tabs.
To make it clear that some functions should not modify the variable
object, this patch adds the const qualifier where it makes sense to some
struct varobj * parameters. Most getters should take a const pointer to
guarantee they don't modify the object.
Unfortunately, I couldn't add it to some callbacks (such as name_of_child).
In the C implementation, they call c_describe_child, which calls
varobj_get_path_expr. varobj_get_path_expr needs to modify the object in
order to cache the computed value. It therefore can't take a const
pointer, and it affects the whole call chain. I suppose that's where you
would use a "mutable" in C++.
I did that to make sure there was no other cases like the one fixed in
the previous patch. I don't think it can hurt.
gdb/ChangeLog:
* ada-varobj.c (ada_number_of_children): Constify struct varobj *
parameter.
(ada_name_of_variable): Same.
(ada_path_expr_of_child): Same.
(ada_value_of_variable): Same.
(ada_value_is_changeable_p): Same.
(ada_value_has_mutated): Same.
* c-varobj.c (varobj_is_anonymous_child): Same.
(c_is_path_expr_parent): Same.
(c_number_of_children): Same.
(c_name_of_variable): Same.
(c_path_expr_of_child): Same.
(get_type): Same.
(c_value_of_variable): Same.
(cplus_number_of_children): Same.
(cplus_name_of_variable): Same.
(cplus_path_expr_of_child): Same.
(cplus_value_of_variable): Same.
* jv-varobj.c (java_number_of_children): Same.
(java_name_of_variable): Same.
(java_path_expr_of_child): Same.
(java_value_of_variable): Same.
* varobj.c (number_of_children): Same.
(name_of_variable): Same.
(is_root_p): Same.
(varobj_ensure_python_env): Same.
(varobj_get_objname): Same.
(varobj_get_expression): Same.
(varobj_get_display_format): Same.
(varobj_get_display_hint): Same.
(varobj_has_more): Same.
(varobj_get_thread_id): Same.
(varobj_get_frozen): Same.
(dynamic_varobj_has_child_method): Same.
(varobj_get_gdb_type): Same.
(is_path_expr_parent): Same.
(varobj_default_is_path_expr_parent): Same.
(varobj_get_language): Same.
(varobj_get_attributes): Same.
(varobj_is_dynamic_p): Same.
(varobj_get_child_range): Same.
(varobj_value_has_mutated): Same.
(varobj_get_value_type): Same.
(number_of_children): Same.
(name_of_variable): Same.
(check_scope): Same.
(varobj_editable_p): Same.
(varobj_value_is_changeable_p): Same.
(varobj_floating_p): Same.
(varobj_default_value_is_changeable_p): Same.
* varobj.h (struct lang_varobj_ops): Consitfy some struct varobj *
parameters.
(varobj_get_objname): Constify struct varobj * parameter.
(varobj_get_expression): Same.
(varobj_get_thread_id): Same.
(varobj_get_frozen): Same.
(varobj_get_child_range): Same.
(varobj_get_display_hint): Same.
(varobj_get_gdb_type): Same.
(varobj_get_language): Same.
(varobj_get_attributes): Same.
(varobj_editable_p): Same.
(varobj_floating_p): Same.
(varobj_has_more): Same.
(varobj_is_dynamic_p): Same.
(varobj_ensure_python_env): Same.
(varobj_default_value_is_changeable_p): Same.
(varobj_value_is_changeable_p): Same.
(varobj_get_value_type): Same.
(varobj_is_anonymous_child): Same.
(varobj_value_get_print_value): Same.
(varobj_default_is_path_expr_parent): Same.
It seems like different languages are doing this differently (e.g.
C and Ada). For C, var->path_expr is set inside c_path_expr_of_child.
The next time the value is requested, is it therefore not recomputed.
Ada does not set this field, but just returns the value. Since the field
is never set, the value is recomputed every time it is requested.
This patch makes it so that path_expr_of_child's only job is to compute
the path expression, not save/cache the value. The field is set by the
varobj common code.
gdb/ChangeLog:
* varobj.c (varobj_get_path_expr): Set var->path_expr.
* c-varobj.c (c_path_expr_of_child): Set local var instead of
child->path_expr.
(cplus_path_expr_of_child): Same.
varobj_get_expression returns an allocated string, which must be freed
by the caller.
gdb/ChangeLog:
* mi-cmd-var.c (print_varobj): Free varobj_get_expression
result.
(mi_cmd_var_info_expression): Same.
* varobj.c (varobj_get_expression): Mention in the comment that
the result must by freed by the caller.
varobj_get_type and type_to_string return an allocated string, which is
not freed at a couple of places.
New in v2:
* Rename char * type to type_name.
* Free in all cases in update_type_if_necessary.
gdb/ChangeLog:
* mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
varobj_get_type.
(varobj_update_one): Same.
* varobj.c (update_type_if_necessary): Free curr_type_str and
new_type_str.
(varobj_get_type): Specify in comment that the result needs to be
freed by the caller.
Both dwarf2read.c (checkproducer) and utils.c (producer_is_gcc_ge_4)
implemented a GCC producer parser that tried to extract the major and minor
version of GCC. Merge them into one GCC producer parser used by both. Also
allow digits in the identifier after "GNU " such as used by GCC5 like:
"GNU C11 5.0.0 20150123 (experimental) -mtune=generic -march=x86-64 -gdwarf-5"
gdb/ChangeLog:
* dwarf2read.c (checkproducer): Call producer_is_gcc.
* utils.c (producer_is_gcc_ge_4): Likewise.
(producer_is_gcc): New function.
* utils.h (producer_is_gcc): New declaration.
Consider the following declarations:
type Array_Type is array (Integer range <>) of Integer;
type Record_Type (N : Integer) is record
A : Array_Type (1 .. N);
end record;
R : Record_Type := Get (10);
It defines what Ada programers call a "discriminated record", where
"N" is a component of that record called a "discriminant", and where
"A" is a component defined as an array type whose upper bound is
equal to the value of the discriminant.
So far, we rely on a number of fairly complex GNAT-specific encodings
to handle this situation. This patch is to enhance GDB to be able to
print this record in the case where the compiler has been modified
to replace those encodings by pure DWARF constructs.
In particular, the debugging information generated for the record above
looks like the following. "R" is a record..
.uleb128 0x10 # (DIE (0x13e) DW_TAG_structure_type)
.long .LASF17 # DW_AT_name: "foo__record_type"
... whose is is of course dynamic (not our concern here)...
.uleb128 0xd # DW_AT_byte_size
.byte 0x97 # DW_OP_push_object_address
.byte 0x94 # DW_OP_deref_size
.byte 0x4
.byte 0x99 # DW_OP_call4
.long 0x19b
.byte 0x23 # DW_OP_plus_uconst
.uleb128 0x7
.byte 0x9 # DW_OP_const1s
.byte 0xfc
.byte 0x1a # DW_OP_and
.byte 0x1 # DW_AT_decl_file (foo.adb)
.byte 0x6 # DW_AT_decl_line
... and then has 2 members, fist "n" (our discriminant);
.uleb128 0x11 # (DIE (0x153) DW_TAG_member)
.ascii "n\0" # DW_AT_name
.byte 0x1 # DW_AT_decl_file (foo.adb)
.byte 0x6 # DW_AT_decl_line
.long 0x194 # DW_AT_type
.byte 0 # DW_AT_data_member_location
... and "A"...
.uleb128 0x11 # (DIE (0x181) DW_TAG_member)
.ascii "a\0" # DW_AT_name
.long 0x15d # DW_AT_type
.byte 0x4 # DW_AT_data_member_location
... which is an array ...
.uleb128 0x12 # (DIE (0x15d) DW_TAG_array_type)
.long .LASF18 # DW_AT_name: "foo__record_type__T4b"
.long 0x194 # DW_AT_type
... whose lower bound is implicitly 1, and the upper bound
a reference to DIE 0x153 = "N":
.uleb128 0x13 # (DIE (0x16a) DW_TAG_subrange_type)
.long 0x174 # DW_AT_type
.long 0x153 # DW_AT_upper_bound
This patch enhanced GDB to understand references to other DIEs
where the DIE's address is at an offset of its enclosing type.
The difficulty was that the address used to resolve the array's
type (R's address + 4 bytes) is different from the address used
as the base to compute N's address (an offset to R's address).
We're solving this issue by using a stack of addresses rather
than a single address when trying to resolve a type. Each address
in the stack corresponds to each containing level. For instance,
if resolving the field of a struct, the stack should contain
the address of the field at the top, and then the address of
the struct. That way, if the field makes a reference to an object
of the struct, we can retrieve the address of that struct, and
properly resolve the dynamic property references that struct.
gdb/ChangeLog:
* gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
kind.
* gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
parameter by "addr_stack" parameter.
(resolve_dynamic_range): Replace "addr" parameter by
"stack_addr" parameter. Update function documentation.
Update code accordingly.
(resolve_dynamic_array, resolve_dynamic_union)
(resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
(resolve_dynamic_type): Update code, following the changes made
to resolve_dynamic_type_internal's interface.
* dwarf2loc.h (struct property_addr_info): New.
(dwarf2_evaluate_property): Replace "address" parameter
by "addr_stack" parameter. Adjust function documentation.
(struct dwarf2_offset_baton): New.
(struct dwarf2_property_baton): Update documentation of
field "referenced_type" to be more general. New field
"offset_info" in union data field.
* dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
parameter by "addr_stack" parameter. Adjust code accordingly.
Add support for PROP_ADDR_OFFSET properties.
* dwarf2read.c (attr_to_dynamic_prop): Add support for
DW_AT_data_member_location attributes as well. Use case
statements instead of if/else condition.
gdb/testsuite/ChangeLog:
* gdb.ada/disc_arr_bound: New testcase.
Tested on x86_64-linux, no regression.
This is preparation work to avoid a regression in the Ada/varobj.
An upcoming patch is going to add support for types in DWARF
which have dynamic properties whose value is a reference to another
DIE.
Consider for instance the following declaration:
type Variant_Type (N : Int := 0) is record
F : String(1 .. N) := (others => 'x');
end record;
type Variant_Type_Access is access all Variant_Type;
VTA : Variant_Type_Access := null;
This declares a variable "VTA" which is an access (=pointer)
to a variant record Variant_Type. This record contains two
components, the first being "N" (the discriminant), and the
second being "F", an array whose lower bound is 1, and whose
upper bound depends on the value of "N" (the discriminant).
Of interest to us, here, is that second component ("F"), and
in particular its bounds. The debugging info, and in particular
the info for the array looks like the following...
.uleb128 0x9 # (DIE (0x91) DW_TAG_array_type)
.long .LASF16 # DW_AT_name: "bar__variant_type__T2b"
.long 0xac # DW_AT_GNAT_descriptive_type
.long 0x2cb # DW_AT_type
.long 0xac # DW_AT_sibling
.uleb128 0xa # (DIE (0xa2) DW_TAG_subrange_type)
.long 0xc4 # DW_AT_type
.long 0x87 # DW_AT_upper_bound
.byte 0 # end of children of DIE 0x91
... where the upper bound of the array's subrange type is a reference
to "n"'s DIE (0x87):
.uleb128 0x8 # (DIE (0x87) DW_TAG_member)
.ascii "n\0" # DW_AT_name
[...]
Once the patch to handle this dynamic property gets applied,
this is what happens when creating a varobj for variable "VTA"
(whose value is null), and then trying to list its children:
(gdb)
-var-create vta * vta
^done,name="vta",numchild="2",value="0x0",
type="bar.variant_type_access",has_more="0"
(gdb)
-var-list-children 1 vta
^done,numchild="2",
children=[child={name="vta.n",[...]},
child={name="vta.f",exp="f",
numchild="43877616", <<<<-----
value="[43877616]", <<<<-----
type="array (1 .. n) of character"}],
has_more="0"
It has an odd number of children.
In this case, we cannot really determine the number of children,
since that number depends on the value of a field in a record
for which we do not have a value. Up to now, the value we've been
displaying is zero - meaning we have an empty array.
What happens in this case, is that, because the VTA is a null pointer,
we're not able to resolve the pointer's target type, and therefore
end up asking ada_varobj_get_array_number_of_children to return
the number of elements in that array; for that, it relies blindly
on get_array_bounds, which assumes the type is no longer dynamic,
and therefore the reads the bound without seeing that it's value
is actually a reference rather than a resolved constant.
This patch prevents the issue by explicitly handling the case of
dynamic arrays, and returning zero child in that case.
gdb/ChangeLog:
* ada-varobj.c (ada_varobj_get_array_number_of_children):
Return zero if PARENT_VALUE is NULL and parent_type's
range type is dynamic.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_var_array: New testcase.
Tested on x86_64-linux.
Consider the following code:
type Record_Type (N : Integer) is record
A : Array_Type (1 .. N);
end record;
[...]
R : Record_Type := Get (10);
Trying to print the bounds of the array R.A yielded:
(gdb) p r.a'last
$4 = cannot find reference address for offset property
A slightly different example, but from the same cause:
(gdb) ptype r
type = <ref> record
n: integer;
a: array (cannot find reference address for offset property
Looking at the debugging info, "A" is described as...
.uleb128 0x11 # (DIE (0x181) DW_TAG_member)
.ascii "a\0" # DW_AT_name
.long 0x15d # DW_AT_type
[...]
... which is an array...
.uleb128 0x12 # (DIE (0x15d) DW_TAG_array_type)
.long .LASF18 # DW_AT_name: "foo__record_type__T4b"
.long 0x194 # DW_AT_type
.long 0x174 # DW_AT_sibling
... whose bounds are described as:
.uleb128 0x13 # (DIE (0x16a) DW_TAG_subrange_type)
.long 0x174 # DW_AT_type
.long 0x153 # DW_AT_upper_bound
.byte 0 # end of children of DIE 0x15d
We can see above that the range has an implict lower value of
1, and an upper value which is a reference 0x153="n". All Good.
But looking at the array's subrange subtype, we see...
.uleb128 0x14 # (DIE (0x174) DW_TAG_subrange_type)
.long 0x153 # DW_AT_upper_bound
.long .LASF19 # DW_AT_name: "foo__record_type__T3b"
.long 0x18d # DW_AT_type
... another subrange type whose bounds are exactly described
the same way. So we have a subrange of a subrange, both with
one bound that's dynamic.
What happens in the case above is that GDB's resolution of "R.A"
yields a array whose index type has static bounds. However, the
subtype of the array's index type was left untouched, so, when
taking the subtype of the array's subrange type, we were left
with the unresolved subrange type, triggering the error above.
gdb/ChangeLog:
* gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
nonzero if the type's subtype is dynamic.
(resolve_dynamic_range): Also resolve the range's subtype.
Tested on x86_64-linux, no regression.
Compilation of (GDB) 7.9.50.20150127-cvs with (GCC) 5.0.0 20150127
fails with
In file included from symfile.c:32:0:
symfile.c: In function 'unmap_overlay_command':
objfiles.h:628:3: error: 'sec' may be used uninitialized in this
function [-Werror=maybe-uninitialized]
for (osect = objfile->sections; osect < objfile->sections_end; osect++) \
^
symfile.c:3442:23: note: 'sec' was declared here
struct obj_section *sec;
^
cc1: all warnings being treated as errors
make[2]: *** [symfile.o] Error 1
make[2]: Leaving directory `gdb/gdb'
While the bug was reported to GCC as
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=64823>,
the attached patch simply initializes sec with NULL.
gdb/ChangeLog:
* symfile.c (unmap_overlay_command): Initialize sec to NULL.
Tested on x86_64-linux.
gdb/ChangeLog:
* NEWS: Mention gdb.Objfile.username.
* python/py-objfile.c (objfpy_get_username): New function.
(objfile_getset): Add "username".
gdb/doc/ChangeLog:
* python.texi (Objfiles In Python): Document Objfile.username.
gdb/testsuite/ChangeLog:
* gdb.python/py-objfile.exp: Add tests for objfile.username.
Add test for objfile.filename, objfile.username after objfile
has been unloaded.
This further improves this testcase to check the output of
our calls to gdb.lookup_type.
gdb/ChangeLog:
* gdb.python/py-lookup-type.exp (test_lookup_type): Change
the second test to print the name attribute of value
returned by the call to gdb.lookup_type, and adjust
the expected output accordingly.
GCC5 defaults to the GNU11 standard for C and warns by default for
implicit function declarations and implicit return types.
https://gcc.gnu.org/gcc-5/porting_to.html
Fixing these issues in the testsuite turns 9 untested and 17 unsupported
testcases into 417 new passes when compiling with GCC5.
gdb/testsuite/ChangeLog:
* gdb.arch/i386-bp_permanent.c (standard): New declaration.
* gdb.base/disp-step-fork.c: Include unistd.h.
* gdb.base/siginfo-obj.c: Include stdio.h.
* gdb.base/siginfo-thread.c: Likewise.
* gdb.mi/non-stop.c: Include unistd.h.
* gdb.mi/nsthrexec.c: Include stdio.h.
* gdb.mi/pthreads.c: Include unistd.h.
* gdb.modula2/unbounded1.c (main): Declare returns int.
* gdb.reverse/consecutive-reverse.c: Likewise.
* gdb.threads/create-fail.c: Include unistd.h.
* gdb.threads/killed.c: Likewise.
* gdb.threads/linux-dp.c: Likewise.
* gdb.threads/non-ldr-exc-1.c: Include stdio.h and string.h.
* gdb.threads/non-ldr-exc-2.c: Likewise.
* gdb.threads/non-ldr-exc-3.c: Likewise.
* gdb.threads/non-ldr-exc-4.c: Likewise.
* gdb.threads/pthreads.c: Include unistd.h.
(main): Declare returns int.
* gdb.threads/tls-main.c (foo): New declaration.
* gdb.threads/watchpoint-fork-mt.c: Define _GNU_SOURCE.
Since Fedora started to use DWZ DWARF compressor:
http://fedoraproject.org/wiki/Features/DwarfCompressor
GDB has slowed down a lot. To make it clear - DWZ is DWARF structure
rearrangement, "compressor" does not mean any zlib style data compression.
This patch reduces LibreOffice backtrace from 5 minutes to 3 seconds (100x)
and it also reduces memory consumption 20x.
[ benchmark is at the bottom of this mail ]
Example of DWZ output:
------------------------------------------------------------------------------
Compilation Unit @ offset 0xc4:
<0><cf>: Abbrev Number: 17 (DW_TAG_partial_unit)
<d0> DW_AT_stmt_list : 0x0
<d4> DW_AT_comp_dir : (indirect string, offset: 0x6f): /usr/src/debug/gdb-7.7.1/build-x86_64-redhat-linux-gnu/gdb
<1><d8>: Abbrev Number: 9 (DW_TAG_typedef)
<d9> DW_AT_name : (indirect string, offset: 0x827dc): size_t
<dd> DW_AT_decl_file : 4
<de> DW_AT_decl_line : 212
<df> DW_AT_type : <0xae>
Compilation Unit @ offset 0xe4:
<0><ef>: Abbrev Number: 13 (DW_TAG_partial_unit)
<f0> DW_AT_stmt_list : 0x0
<f4> DW_AT_comp_dir : (indirect string, offset: 0x6f): /usr/src/debug/gdb-7.7.1/build-x86_64-redhat-linux-gnu/gdb
<1><f8>: Abbrev Number: 45 (DW_TAG_typedef)
<f9> DW_AT_name : (indirect string, offset: 0x251): __off_t
<fd> DW_AT_decl_file : 3
<fe> DW_AT_decl_line : 131
<ff> DW_AT_type : <0x68>
Compilation Unit @ offset 0x62d9f9:
<0><62da04>: Abbrev Number: 20 (DW_TAG_compile_unit)
[...]
<62da12> DW_AT_low_pc : 0x807e10
<62da1a> DW_AT_high_pc : 134
<62da1c> DW_AT_stmt_list : 0xf557e
<1><62da20>: Abbrev Number: 7 (DW_TAG_imported_unit)
<62da21> DW_AT_import : <0xcf> [Abbrev Number: 17]
------------------------------------------------------------------------------
One can see all DW_TAG_partial_unit have DW_AT_stmt_list 0x0 which causes
repeated decoding of that .debug_line unit on each DW_TAG_imported_unit.
This was OK before as each DW_TAG_compile_unit has its own .debug_line unit.
But since the introduction of DW_TAG_partial_unit by DWZ one should cache
read-in DW_AT_stmt_list .debug_line units.
Fortunately one does not need to cache whole
struct linetable *symtab->linetable
and other data from .debug_line mapping PC<->lines
------------------------------------------------------------------------------
Line Number Statements:
Extended opcode 2: set Address to 0x45c880
Advance Line by 25 to 26
Copy
------------------------------------------------------------------------------
as the only part of .debug_line which GDB needs for DW_TAG_partial_unit is:
------------------------------------------------------------------------------
The Directory Table:
../../gdb
/usr/include/bits
[...]
The File Name Table:
Entry Dir Time Size Name
1 1 0 0 gdb.c
2 2 0 0 string3.h
[...]
------------------------------------------------------------------------------
specifically referenced in GDB for DW_AT_decl_file at a single place:
------------------------------------------------------------------------------
fe = &cu->line_header->file_names[file_index - 1];
SYMBOL_SYMTAB (sym) = fe->symtab;
------------------------------------------------------------------------------
This is because for some reason DW_TAG_partial_unit never contains PC-related
DWARF information. I do not know exactly why, the compression ratio is a bit
lower due to it but thanksfully currently it is that way:
dwz.c:
------------------------------------------------------------------------------
/* These attributes reference code, prevent moving
DIEs with them. */
case DW_AT_low_pc:
case DW_AT_high_pc:
case DW_AT_entry_pc:
case DW_AT_ranges:
die->die_ck_state = CK_BAD;
+
/* State of checksum computation. Not computed yet, computed and
suitable for moving into partial units, currently being computed
and finally determined unsuitable for moving into partial units. */
enum { CK_UNKNOWN, CK_KNOWN, CK_BEING_COMPUTED, CK_BAD } die_ck_state : 2;
------------------------------------------------------------------------------
I have also verified also real-world Fedora debuginfo files really comply with
that assumption with dwgrep
https://github.com/pmachata/dwgrep
using:
------------------------------------------------------------------------------
dwgrep -e 'entry ?DW_TAG_partial_unit child* ( ?DW_AT_low_pc , ?DW_AT_high_pc , ?DW_AT_ranges )' /usr/lib/debug/**
------------------------------------------------------------------------------
BTW I think GDB already does not support the whole DW_TAG_imported_unit and
DW_TAG_partial_unit usage possibilities as specified by the DWARF standard.
I think GDB would not work if DW_TAG_imported_unit was used in some inner
level and not at the CU level (readelf -wi level <1>) - this is how DWZ is
using DW_TAG_imported_unit. Therefore I do not think further assumptions
about DW_TAG_imported_unit and DW_TAG_partial_unit usage by DWZ are a problem
for GDB.
One could save the whole .debug_line decoded PC<->lines mapping (and not just
the DW_AT_decl_file table) but:
* there are some problematic corner cases so one could do it incorrectly
* there are no real world data to really test such patch extension
* such extension could be done perfectly incrementally on top of this patch
------------------------------------------------------------------------------
benchmark - on Fedora 20 x86_64 and FSF GDB HEAD:
echo -e 'thread apply all bt\nset confirm no\nq'|./gdb -p `pidof soffice.bin` -ex 'set pagination off' -ex 'maintenance set per-command
space' -ex 'maintenance set per-command symtab' -ex 'maintenance set per-command time'
FSF GDB HEAD ("thread apply all bt"):
Command execution time: 333.693000 (cpu), 335.587539 (wall)
---sec
Space used: 1736404992 (+1477189632 for this command)
----MB
vs.
THIS PATCH ("thread apply all bt"):
Command execution time: 2.595000 (cpu), 2.607573 (wall)
-sec
Space used: 340058112 (+85917696 for this command)
--MB
FSF GDB HEAD ("thread apply all bt full"):
Command execution time: 466.751000 (cpu), 468.345837 (wall)
---sec
Space used: 2330132480 (+2070974464 for this command)
----MB
vs.
THIS PATCH ("thread apply all bt full"):
Command execution time: 18.907000 (cpu), 18.964125 (wall)
--sec
Space used: 364462080 (+110325760 for this command)
---MB
------------------------------------------------------------------------------
gdb/ChangeLog
2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix 100x slowdown regression on DWZ files.
* dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
(struct line_header): Add offset and offset_in_dwz.
(dwarf_decode_lines): Add parameter decode_mapping to the declaration.
(free_line_header_voidp): New declaration.
(line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
functions.
(dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
(handle_DW_AT_stmt_list): Use line_header_hash.
(free_line_header_voidp): New function.
(dwarf_decode_line_header): Initialize offset and offset_in_dwz.
(dwarf_decode_lines): New parameter decode_mapping, use it.
(dwarf2_free_objfile): Free line_header_hash.
In the situation described in bug 17416 [1]:
* "set print object" is on;
* The variable object is a pointer to a struct, and it contains an
invalid value (e.g. NULL, or random uninitialized value);
* The variable object (struct) has a child which is also a pointer to a
struct;
* We try to use "-var-list-children".
... an exception thrown in value_ind can propagate too far and leave an
half-built variable object, leading to a wrong state. This patch adds a
TRY_CATCH to catch it and makes value_rtti_indirect_type return NULL in
that case, meaning that the type of the pointed object could not be
found.
A test for the fix is also added.
New in v2:
* Added test.
* Restructured "catch" code.
* Added details about the bug in commit log.
gdb/Changelog:
* valops.c (value_rtti_indirect_type): Catch exception thrown by
value_ind.
gdb/testsuite/ChangeLog
* gdb.mi/mi-var-list-children-invalid-grandchild.c: New file.
* gdb.mi/mi-var-list-children-invalid-grandchild.exp: New file.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=17416
Add a flag field is_noreturn to struct func_type. Make calling_convention
a small bit field to not increase the size of the struct. Set is_noreturn
if the new GCC5/DWARF5 DW_AT_noreturn is set on a DW_TAG_subprogram.
Use this information to warn the user before doing a finish or return from
a function that does not return normally to its caller.
(gdb) finish
warning: Function endless does not return normally.
Try to finish anyway? (y or n)
(gdb) return
warning: Function does not return normally to caller.
Make endless return now? (y or n)
gdb/ChangeLog
* dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
DW_AT_noreturn.
* gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
calling_convention an 8 bit bit field.
(TYPE_NO_RETURN): New macro.
* infcmd.c (finish_command): Query if function does not return
normally.
* stack.c (return_command): Likewise.
gdb/testsuite/ChangeLog
* gdb.base/noreturn-return.c: New file.
* gdb.base/noreturn-return.exp: New file.
* gdb.base/noreturn-finish.c: New file.
* gdb.base/noreturn-finish.exp: New file.
include/ChangeLog
* dwarf2.def (DW_AT_noreturn): New DWARF5 attribute.
The dwarf2.h addition and the code to emit the new attribute is already in
the gcc tree.
linux_nat_is_async_p currently always returns true, even when the
target is _not_ async. That confuses
gdb_readline_wrapper/gdb_readline_wrapper_cleanup, which
force-disables target-async while the secondary prompt is active. As
a result, when gdb_readline_wrapper returns, the target is left async,
even through it was sync to begin with.
That can result in weird bugs, like the one the test added by this
commit exposes.
Ref: https://sourceware.org/ml/gdb-patches/2015-01/msg00592.html
gdb/ChangeLog:
2015-01-23 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_is_async_p): New macro.
(linux_nat_is_async_p):
(linux_nat_terminal_inferior): Check whether the target can async
instead of whether it is already async.
(linux_nat_terminal_ours): Don't check whether the target is
async.
(linux_async_pipe): Use linux_is_async_p.
gdb/testsuite/ChangeLog:
2015-01-23 Pedro Alves <palves@redhat.com>
* gdb.threads/continue-pending-after-query.c: New file.
* gdb.threads/continue-pending-after-query.exp: New file.
gdb_interact is a small utility that we have found quite useful to debug
test cases.
Putting gdb_interact in a test suspends it and allows to interact with
gdb to inspect whatever you want. You can then type ">>>" to resume the
test execution. Of course, this is only for gdb devs. It wouldn't make
sense to leave a gdb_interact permanently in a test case.
When starting the interaction with the user, the script prints this
banner:
+------------------------------------------+
| Script interrupted, you can now interact |
| with by gdb. Type >>> to continue. |
+------------------------------------------+
Notes:
* When gdb is launched, the gdb_spawn_id variable (lib/gdb.exp) is
assigned -1. Given the name, I would expect it to contain the gdb
expect spawn id, which is needed for interact. I changed all places
that set gdb_spawn_id to -1 to set it to the actual gdb spawn id
instead.
* When entering the "interact" mode, the last (gdb) prompt is already
eaten by expect, so it doesn't show up on the terminal. Subsequent
prompts do appear though. We tried to print "(gdb)" just before the
interact to replace it. However, it could be misleading if you are
debugging an MI test case, it makes you think that you are typing in a
CLI prompt, when in reality it's MI. In the end I decided that since
the feature is for developers who know what they're doing and that one
is normally consciously using gdb_interact, the script doesn't need
to babysit the user.
* There are probably some quirks depending on where in the script
gdb_interact appears (e.g. it could interfere with following
commands and make them fail), but it works for most cases. Quirks can
always be fixed later.
The idea and original implementation was contributed by Anders
Granlund, a colleague of mine. Thanks to him.
gdb/testsuite/ChangeLog:
* gdb.base/statistics.exp: Assign spawn id to gdb_spawn_id.
* gdb.base/valgrind-db-attach.exp: Same.
* gdb.base/valgrind-infcall.exp: Same.
* lib/mi-support.exp (default_mi_gdb_start): Same.
* lib/prompt.exp (default_prompt_gdb_start): Same.
* lib/gdb.exp (default_gdb_spawn): Same.
(gdb_interact): New.
downstream Fedora request:
Please make it easier to find the backtrace of the crashing thread
https://bugzilla.redhat.com/show_bug.cgi?id=1024504
Currently after loading a core file GDB prints:
Core was generated by `./threadcrash1'.
Program terminated with signal SIGSEGV, Segmentation fault.
8 *(volatile int *)0=0;
(gdb) _
there is nowhere seen which of the threads had crashed. In reality GDB always
numbers that thread as #1 and it is the current thread that time. But after
dumping all the info into a file for later analysis it is no longer obvious.
'thread apply all bt' even puts the thread #1 to the _end_ of the output!!!
I find maybe as good enough and with no risk of UI change flamewar to just
sort the threads by their number. Currently they are printed as they happen
in the internal GDB list which has no advantage. Printing thread #1 as the
first one with assumed 'thread apply all bt' (after the core file is loaded)
should make the complaint resolved I guess.
On Thu, 15 Jan 2015 20:29:07 +0100, Doug Evans wrote:
No objection to sorting the list, but if thread #1 is the important one,
then a concern could be it'll have scrolled off the screen (such a
concern has been voiced in another thread in another context),
and if not lost (say it's in an emacs buffer) one would still have
to scroll back to see it.
So one *could* still want #1 to be last.
Do we want an option to choose the sort direction?
gdb/ChangeLog
2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (Changes since GDB 7.9): Add 'thread apply all' option
'-ascending'.
* thread.c (tp_array_compar_ascending, tp_array_compar): New.
(thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
Sort tp_array using tp_array_compar.
(_initialize_thread): Extend thread_apply_all_command help.
gdb/doc/ChangeLog
2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Threads): Describe -ascending for thread apply all.
downstream Fedora request:
Please make it easier to find the backtrace of the crashing thread
https://bugzilla.redhat.com/show_bug.cgi?id=1024504
Currently after loading a core file GDB prints:
Core was generated by `./threadcrash1'.
Program terminated with signal SIGSEGV, Segmentation fault.
8 *(volatile int *)0=0;
(gdb) _
there is nowhere seen which of the threads had crashed. In reality GDB always
numbers that thread as #1 and it is the current thread that time. But after
dumping all the info into a file for later analysis it is no longer obvious.
'thread apply all bt' even puts the thread #1 to the _end_ of the output!!!
Should GDB always print after loading a core file what "thread" command would
print?
[Current thread is 1 (Thread 0x7fcbe28fe700 (LWP 15453))]
BTW I think it will print the thread even when loading single/non-threaded
core file when other inferior(s) exist. But that currently crashes
[Bug threads/12074] multi-inferior internal error
https://sourceware.org/bugzilla/show_bug.cgi?id=12074
plus I think that would be a correct behavior anyway.
gdb/ChangeLog
2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* corelow.c (core_open): Call also thread_command.
* gdbthread.h (thread_command): New prototype moved from ...
* thread.c (thread_command): ... here.
(thread_command): Make it global.
When GDB is configured with "--without-tui --with-curses" or "--with-tui",
$prefer_curses is set to yes. But, that still doesn't mean that curses
will be used. configure will still search for the curses library, and
continue building without it. That's done here:
curses_found=no
if test x"$prefer_curses" = xyes; then
...
AC_SEARCH_LIBS(waddstr, [ncurses cursesX curses])
if test "$ac_cv_search_waddstr" != no; then
curses_found=yes
fi
fi
So if waddstr is not found, meaning curses is not really
available, even though it'd be preferred, $prefer_curses is
'yes', but $curses_found is 'no'.
So the right fix to tell whether we're linking with curses is
$curses_found=yes.
gdb/ChangeLog:
2015-01-22 Pedro Alves <palves@redhat.com>
* configure.ac [*mingw32*]: Check $curses_found instead of
$prefer_curses.
* configure: Regenerate.
* windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
HAVE_NCURSES_NCURSES_H checks.
gdb/
2015-01-22 Eli Zaretskii <eliz@gnu.org>
* gdb/tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
fails with the 1st arg NULL, try again with "unknown". Don't test
the "cup" capability: it isn't supported by the Windows port of
ncurses, but the Windows console driver is still capable of
supporting TUI.
TBH while I always comment reasons for each of the compilation options in
reality I tried them all and chose that combination that needs the most simple
compile/compile-object-load.c (ld.so emulation) implementation.
gdb/ChangeLog
2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
gdb/testsuite/ChangeLog
2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.compile/compile.exp (pointer to jit function): New test.
gdb/
2015-01-22 Eli Zaretskii <eliz@gnu.org>
* Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
(ALLDEPFILES): Remove irix5-nat.c. These two are part of the
reason that "make TAGS" is broken.
Original working flow has several issues:
- typo issue: "(inst >> 26) == 0x1f && ..." for checking 'stw(m)'.
- "(inst >> 6) == 0xa" needs to be "((inst >> 6) & 0xf) == 0xa".
And also need check additional store instructions:
- For absolute memory: 'stby', 'stdby'.
- For unaligned: 'stwa', 'stda'.
The original code also can be improved:
- Remove redundant double check "(inst >> 26) == 0x1b" for 'stwm'.
- Use 2 'switch' statements instead of all 'if' statements.
* hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
and check additional store instructions.
gdb/
2015-01-17 Eli Zaretskii <eliz@gnu.org>
* configure.ac [*mingw32*]: Only add windows-termcap.o to
CONFIG_OBS if not building with a curses library.
* configure: Regenerate.
* windows-termcap.c: Include defs.h. Make the whole body empty if
either one of HAVE_CURSES_H or HAVE_NCURSES_H or
HAVE_NCURSES_NCURSES_H is defined.
This commit fixes the regression on RHEL-5 systems introduced by
nat/linux-personality.c's check of HAVE_DECL_ADDR_NO_RANDOMIZE.
RHEL-5 systems define HAVE_DECL_ADDR_NO_RANDOMIZE as zero, so we
cannot use #ifndef; instead this patch uses the "#if !" construction.
The regression was reported by Ulrich Weigand here:
<https://sourceware.org/ml/gdb-patches/2015-01/msg00458.html>
gdb/ChangeLog
2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
* nat/linux-personality.c: Replace "#ifndef
HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
!HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
systems.
gdb/
2015-01-16 Eli Zaretskii <eliz@gnu.org>
* tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
functions.
(_initialize_tui_win) <border-kind, border-mode>:
<active-border-mode>: Use tui_set_var_cmd as the "set" function.
* tui/tui-win.h: Add prototype for tui_rehighlight_all.
Pedro Alves
Joel Brobecker
Steve Ellcey
Antoine Tremblay
David Taylor
Patrick Palka
Jose E. Marchesi
Maxim Ostapenko
Mark Wielaard
Doug Evans
Yao Qi
Jan Kratochvil
Tom Tromey
Doug Evans
Simon Marchi
Luis Machado
Sergio Durigan Junior
Markus Metzger
Don Breazeal
Andreas Arnez
Tom Tromey
Gary Benson
Eli Zaretskii
Alexander Klimov
Anders Granlund
Chen Gang
Wei-cheng Wang