gdb/testsuite/ChangeLog
2019-02-12 Weimin Pan <weimin.pan@oracle.com>
PR breakpoints/21870
* gdb.arch/aarch64-dbreg-contents.exp: New file.
* gdb.arch/aarch64-dbreg-contents.c: New file.
Object file paths passed to find_separate_debug_file are always
canonical paths with symbolic links resolved. If a sysroot path
traverses a symbolic link, it will not match the object file paths.
Generate a canonical version of the sysroot directory. If it is
valid, use it instead of gdb_sysroot with child_path to determine if
an object file is under a system root.
gdb/ChangeLog:
* symfile.c (find_separate_debug_file): Use canonical path of
sysroot with child_path instead of gdb_sysroot if it is valid.
This fixes the case where the sysroot happens to end in a trailing
'/'. Note that the path returned from child_path always skips over
the directory separator at the start of the base path, so a separator
must always be explicitly added before the base path.
gdb/ChangeLog:
* symfile.c (find_separate_debug_file): Use child_path to
determine if an object file is under a sysroot.
child_path returns a pointer to the first component in a child path
that comes after a parent path. This does not depend on trying to
stat() the paths since they may describe remote paths but instead
relies on filename parsing. The function requires that the child path
describe a filename that contains at least one component below the
parent path and returns a pointer to the first component.
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/child-path-selftests.c.
* common/pathstuff.c (child_path): New function.
* common/pathstuff.h (child_path): New prototype.
* unittests/child-path-selftests.c: New file.
When an object file is present in a system root, GDB currently looks
for separate debug files under the global debugfile directories. For
example, if the sysroot is set to "/myroot" and hte global debugfile
directory is set to "/usr/lib/debug", GDB will look for a separate
debug file for "/myroot/lib/libc.so.7" in the following paths:
/myroot/lib/libc.so.7.debug
/myroot/lib/.debug/libc.so.7.debug
/usr/lib/debug//myroot/lib/libc.so.7.debug
/usr/lib/debug/lib/libc.so.7.debug
However, some system roots include a full system installation
including a nested global debugfile directory under the sysroot. This
patch adds an additional check to support such systems. In the
example above the additional path searched is:
/myroot/usr/lib/debug/lib/libc.so.7.debug
To try to preserve existing behavior as much as possible, this new
path is searched last for each global debugfile directory.
gdb/ChangeLog:
* symfile.c (find_separate_debug_file): Look for separate debug
files in debug directories under the sysroot.
Note that print_msymbol_info does not (yet?) print data msymbol
using variable_name_style, as otherwise 'info variables'
would show the non debugging symbols in variable name style,
but 'real' variables would be not styled.
2019-02-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* symtab.h (struct minimal_symbol data_p): New const method.
(struct minimal_symbol text_p): Likewise.
* symtab.c (output_source_filename): Use file name style
to print file name.
(print_symbol_info): Likewise.
(print_msymbol_info): Use address style to print addresses.
Use function name style to print executable text symbols.
(expand_symtab_containing_pc): Use data_p.
(find_pc_sect_compunit_symtab): Likewise.
Note that ada-typeprint.c print_func_type is called with
types representing functions and is also called to print
a function NAME together with its type. In such a case, the function
name will be printed using function name style.
Similarly, c_print_type_1 is called to print a type, optionally
with the name of an object of this type in the VARSTRING arg.
So, c_print_type_1 uses function name style to print varstring
when the type code indicates that c_print_type_1 TYPE is some
'real code'.
gdb/ChangeLog
2019-02-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* ada-typeprint.c (print_func_type): Print function name
style to print function name.
* c-typeprint.c (c_print_type_1): Likewise.
When a node is removed from a splay tree, the splay tree was
not using the function splay_tree_delete_key_fn to release the key.
This was causing a leak, fixed by Tom Tromey.
This patch fixes another key leak, that happens when a key equal to
a key already present is inserted. In such a case, we have to release
the old KEY.
Note that this is based on the assumption that the caller always
allocates a new KEY when doing an insert.
Also, clarify the documentation about when the release functions are
called.
2019-02-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* splay-tree.h (splay_tree_delete_key_fn): Update comment.
(splay_tree_delete_value_fn): Likewise.
libiberty/ChangeLog
2019-02-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* splay-tree.c (splay_tree_insert): Also release old KEY in case
of insertion of a key equal to an already present key.
(splay_tree_new_typed_alloc): Update comment.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@268793 138bc75d-0d04-0410-961f-82ee72b054a4
Checking the syscall number when stopped on entry/exit relies on checking
the value in register X8.
However, on exit from an execve syscall, the registers will all be cleared.
Given this is only checked on syscall entry/exit, then a cleared register
state either means execve exit or syscall 0 (io_setup) entry with invalid
parameters and an invalid FR and LR, which in reality should never happen.
Use this to detect execve exit.
Move function to allow use of aarch64_sys_execve enum, and use newer
regcache functions.
Fixes gdb.base/catch-syscall.exp on Aarch64.
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_linux_get_syscall_number): Check
for execve.
ommit 3ae729d5a4
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Mar 7 04:18:45 2018 -0800
x86: Rewrite NOP generation for fill and alignment
increased MAX_MEM_FOR_RS_ALIGN_CODE to 4095 which resulted in increase
of assembler time and memory usage by 5 times for inputs with many
.p2align directives, which is typical for LTO output. This patch passes
max_bytes to TC_FRAG_INIT so that MAX_MEM_FOR_RS_ALIGN_CODE can be set
as needed and tracked by backend it so that HANDLE_ALIGN can check the
maximum alignment for each rs_align_code frag. Wall time to assemble
the same cc1plus.s:
before:
423.78user 0.89system 7:05.71elapsed 99%CPU
after:
102.35user 0.27system 1:42.89elapsed 99%CPU
PR gas/24165
* frags.c (frag_var_init): Pass max_chars to TC_FRAG_INIT as
max_bytes.
* config/tc-aarch64.h (TC_FRAG_INIT): Add and pass max_bytes to
aarch64_init_frag.
* /config/tc-arm.h (TC_FRAG_INIT): And and pass max_bytes to
arm_init_frag.
* config/tc-avr.h (TC_FRAG_INIT): And and ignore max_bytes.
* config/tc-ia64.h (TC_FRAG_INIT): Likewise.
* config/tc-mmix.h (TC_FRAG_INIT): Likewise.
* config/tc-nds32.h (TC_FRAG_INIT): Likewise.
* config/tc-ns32k.h (TC_FRAG_INIT): Likewise.
* config/tc-rl78.h (TC_FRAG_INIT): Likewise.
* config/tc-rx.h (TC_FRAG_INIT): Likewise.
* config/tc-score.h (TC_FRAG_INIT): Likewise.
* config/tc-tic54x.h (TC_FRAG_INIT): Likewise.
* config/tc-tic6x.h (TC_FRAG_INIT): Likewise.
* config/tc-xtensa.h (TC_FRAG_INIT): Likewise.
* config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Set to
(alignment ? ((1 << alignment) - 1) : 1)
(i386_tc_frag_data): Add max_bytes.
(TC_FRAG_INIT): Add and track max_bytes.
(HANDLE_ALIGN): Replace MAX_MEM_FOR_RS_ALIGN_CODE with
fragP->tc_frag_data.max_bytes.
* doc/internals.texi: Update TC_FRAG_TYPE with max_bytes.
Valgrind detects a bunch of leaks in several tests, such as:
==22905== 40 (24 direct, 16 indirect) bytes in 1 blocks are definitely lost in loss record 531 of 3,268
==22905== at 0x4C2C4CC: operator new(unsigned long) (vg_replace_malloc.c:344)
==22905== by 0x5893AD: get_type_stack() (parse.c:1509)
==22905== by 0x3F4EAD: c_yyparse() (c-exp.y:1223)
==22905== by 0x3F71BC: c_parse(parser_state*) (c-exp.y:3308)
==22905== by 0x588CEA: parse_exp_in_context_1(char const**, unsigned long, block const*, int, int, int*) [clone .constprop.89] (parse.c:1205)
==22905== by 0x588FA1: parse_exp_in_context (parse.c:1108)
==22905== by 0x588FA1: parse_exp_1 (parse.c:1099)
==22905== by 0x588FA1: parse_expression(char const*) (parse.c:1247)
...
==22395== 456 (168 direct, 288 indirect) bytes in 7 blocks are definitely lost in loss record 2,658 of 2,978
==22395== at 0x4C2C4CC: operator new(unsigned long) (vg_replace_malloc.c:344)
==22395== by 0x5893AD: get_type_stack() (parse.c:1509)
==22395== by 0x3F4ECF: c_yyparse() (c-exp.y:1230)
==22395== by 0x3F71BC: c_parse(parser_state*) (c-exp.y:3308)
==22395== by 0x588CEA: parse_exp_in_context_1(char const**, unsigned long, block const*, int, int, int*) [clone .constprop.89] (parse.c:1205)
==22395== by 0x588FA1: parse_exp_in_context (parse.c:1108)
==22395== by 0x588FA1: parse_exp_1 (parse.c:1099)
==22395== by 0x588FA1: parse_expression(char const*) (parse.c:1247)
==22395== by 0x67BB9D: whatis_exp(char const*, int) (typeprint.c:515)
...
==22395== VALGRIND_GDB_ERROR_BEGIN
==22395== 144 (24 direct, 120 indirect) bytes in 1 blocks are definitely lost in loss record 1,016 of 2,978
==22395== at 0x4C2C4CC: operator new(unsigned long) (vg_replace_malloc.c:344)
==22395== by 0x5893AD: get_type_stack() (parse.c:1509)
==22395== by 0x3F4E8A: c_yyparse() (c-exp.y:1217)
==22395== by 0x3F71BC: c_parse(parser_state*) (c-exp.y:3308)
==22395== by 0x588CEA: parse_exp_in_context_1(char const**, unsigned long, block const*, int, int, int*) [clone .constprop.89] (parse.c:1205)
==22395== by 0x588FA1: parse_exp_in_context (parse.c:1108)
==22395== by 0x588FA1: parse_exp_1 (parse.c:1099)
==22395== by 0x588FA1: parse_expression(char const*) (parse.c:1247)
==22395== by 0x67BB9D: whatis_exp(char const*, int) (typeprint.c:515)
...
Fix these by storing the allocated type_stack in the cpstate->type_stacks
vector.
Tested on debian/amd64, natively and under valgrind.
gdb/ChangeLog
2019-02-10 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* c-exp.y (direct_abs_decl): Use emplace_back to record the
type_stack.
Consider the following variable, which is a string whose value
is not known at compile time, because it is the return value
from a function call (Get_Name):
A : String := Get_Name;
If one tries to create a varobj for that variable, everything works
as expected:
| (gdb) -var-create a * a
| ^done,name="a",numchild="19",value="[19] \"Some kind of string\"",type="<ref> array (1 .. 19) of character",thread-id="1",has_more="0"
However, try then to request an update, regardless of whether the string
has changed or not, and we get a crash:
| -var-update a
| ~"/[...]/gdb/varobj.c:1379: internal-error: bool install_new_value(varobj*, value*, bool): Assertion `!value_lazy (var->value.get ())' failed.\nA problem internal to GDB has been detected,\nfurther debugging may prove unreliable.\nQuit this debugging session? (y or n) "
When the varobj gets created (-var-create), the expression is evaluated
and transformed into a value. The debugging information describes our
variables as a reference to an array of characters, so our value has
the corresponding type. We then call varobj.c::install_new_value
to store that value inside our varobj, and we see that this function
pretty starts by determining weither our varobj is changeable, via:
| changeable = varobj_value_is_changeable_p (var);
(where 'var' is the varobj we are building, and where the function
varobj_value_is_changeable_p simply dispatches to the Ada version
of this routine: ada_value_is_changeable_p).
At this point, the varobj doesn't have a value, yet, but it does
have a type which was provided by varobj_create a little bit before
install_new_value was called. So ada_value_is_changeable_p uses that
to determine whether or not our type is changeable.
Since our type is a reference to an array, and that the value of
such objects is displayed as if there weren't a reference, it means
that our object is changeable -- in other words, if an element of
the string changes, then the "value" field of the varobj will change
accordingly. But unfortunately, ada_value_is_changeable_p mistakenly
returns false, because it is missing the handling of reference types.
As a consequence of this, install_new_value doesn't feel it is
necessary to fetch the value's contents, as explained by the following
comment inside that function:
/* The new value might be lazy. If the type is changeable,
that is we'll be comparing values of this type, fetch the
value now. Otherwise, on the next update the old value
will be lazy, which means we've lost that old value. */
This means that a lazy value gets installed inside our varobj
as a result of the mistake in ada_value_is_changeable_p.
Another important detail is that, after determining whether
our varobj is changeable or not, it then purposefully removes
the reference layer from our value:
/* We are not interested in the address of references, and given
that in C++ a reference is not rebindable, it cannot
meaningfully change. So, get hold of the real value. */
if (value)
value = coerce_ref (value);
The consequence of those two facts on shows up only later, when
the user requests an update (-var-update). When doing so, GDB
evaluates the expression again into a value which is once more
a reference to a string, and then calls install_new_value again
to install the new value and report any changes. This time around,
the call to...
| changeable = varobj_value_is_changeable_p (var);
... now gets a varobj which has a value, and one which had the reference
layer removed! So, this time, we classify the varobj correctly, and
say it is changeable. And because it is changeable, we then go into
the section of code in install_new_value which checks for changes,
where we need the varobj's value to not be lazy, as explained by
the comment we quoted above. That's what the assertion was about.
This patch fixes the issues by teaching ada_value_is_changeable_p
to ignore reference layers when evaluating a given varobj's type.
gdb/ChangeLog:
* ada-varobj.c (ada_value_is_changeable_p): Add handling of
TYPE_CODE_REF types.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_ref_changeable: New testcase.
Prior to this patch, this testcase reports 2 unresolved tests
(due to GDB hitting the internal error). With this patch, all
tests in this testcase pass.
Tested on x86_64-linux, no regression.
Recent gcc commit b4371b277f1e ("[ARC] Enable init_array support")
inhibits DT_"INIT,FINI} in favor of DT_{INIT,FINI}ARRAY.
Even prior to that, it seems ARC port is the only one with this
special DT_INIT/FINI handling in linker emulation. Removing it
doesn't seem to change any uClibc/glibc testsuite results,
so this can RIP anyways.
bfd/
2019-02-01 Vineet Gupta <vgupta@synopsys.com>
* elf32-arc.c: Delete init_str, fini_str
ld/
2019-02-01 Vineet Gupta <vgupta@synopsys.com>
* emultempl/arclinux.em : Delete special INIT/FINI handling.
This adds fp reg support similar to the existing general reg support.
This fixes one gdb testsuite failure
FAIL: gdb.base/gcore.exp: corefile restored system registers
which fails without the patch because fcsr was missing. Otherwise, no
regressions with riscv64-linux native testsuite run.
gdb/
* riscv-linux-tdep.c (riscv_linux_fregmap): New.
(riscv_linux_fregset): New.
(riscv_linux_iterate_over_regset_sections): Call cb for .reg2 section.
This lets us accept an instruction like
beq a2,x0,.Label
and generate a compressed beqz. This will allow some future simplications
to the gcc support, e.g. eliminating some duplicate patterns, and avoiding
adding new duplicate patterns, since currently we have to handle signed
and equality compares against zero specially.
Tested with rv{32,64}-{elf,linux} cross builds and make checks for binutils
and gcc. There were no regressions.
gas/
* config/tc-riscv.c (validate_riscv_insn) <'C'>: Add 'z' support.
(riscv_ip) <'C'>: Add 'z' support.
opcodes/
* riscv-opc.c (riscv_opcodes) <beq>: Use Cz to compress 3 operand form.
<bne>: Likewise.
The size tool currently defaults to berkeley format output. However,
this output format has a weird quirk, read-only data is counted
against the text sections, not the data sections.
The code offers no real explanation for why this is, but I'm reluctant
to change it for two reasons, first, I'm assuming it probably makes
sense in some case that I'm not thinking of (maybe a target where
sections are not marked executable, and so there's no distinction
between read-only data and code), and second, the code has been this
way for at least 20 years, I worry that changing things now might
cause more confusion than it solves.
This commit then introduces a new output format for the size tool,
this new format displays the results in a similar manor to the
berkeley format, but counts read-only data in the data column, and
only executable sections are counted in the text column.
Given that this is a brand new output format I've gone ahead and
simplified things a little, while the berkeley format displays the
total twice, once in decimal and once in hex, the new display format
just displays the total in decimal. Of course, there's still the
'--radix' option which can be used to display all the results in
hexadecimal or octal.
I've called the new format 'gnu', so '--format=gnu' or '-G' are used
to access it.
binutils/ChangeLog:
* size.c (berkeley_format): Delete.
(enum output_format): New enum.
(selected_output_format): New variable.
(usage): Update to mention GNU format.
(main): Update to extract options, and select format as needed.
Handle GNU format where needed.
(berkeley_sum): Renamed to...
(berkeley_or_gnu_sum): ...this, and updated to handle both formats.
(berkeley_format): Renamed to...
(berkeley_or_gnu_format): ...this, and updated to handle both
formats.
(print_sizes): Handle GNU format.
* doc/binutils.texi (size): Document new GNU format.
* testsuite/binutils-all/size.exp: Add test of extended
functionality.
* NEWS: Mention new functionality.
This was always supposed to be an error. Code emitted by gcc for
inline PLT calls assumes PLT is an array of addresses.
* elf32-ppc.c (ppc_elf_relocate_section): Add %X to "unsupported
for bss-plt" warning to make it an error.
The example output from size in Berkeley format is out of date. The
columns are now displayed right aligned. This patch updates the
documentation to reflect reality.
binutils/ChangeLog:
* doc/binutils.texi (size): Update example output for Berkeley
format output.
The software trap instruction HLT that was introduced in Armv8-a is used
as the semihosting trap instruction in AArch64. In order to allow systems
configured to run AArch64 code to also run AArch32 with semihosting it was
decided that AArch32 should also use HLT in the case of the "mixed mode"
environment. This requires that HLT also be backported to all earlier
architectures. The instruction is in the undefined encoding space earlier
architectures but must trigger a semihosting trap [3].
The Arm Architectural Reference Manual [1] doesn't explicitly mention this
however this is an explicit requirement in the Semihosting-v2 protocol [2].
[1] https://developer.arm.com/docs/ddi0487/latest/arm-architecture-reference-manual-armv8-for-armv8-a-architecture-profile
[2] https://developer.arm.com/docs/100863/latest/the-semihosting-interface
[3] 19a6e31c9d
gas/ChangeLog:
* config/tc-arm.c (insns): Redefine THUMB_VARIANT and ARM_VARIANT for
hlt to armv1.
* testsuite/gas/arm/armv8a-automatic-hlt.d: Update TAGs
* testsuite/gas/arm/hlt.d: New test.
* testsuite/gas/arm/hlt.s: New test.
opcodes/ChangeLog:
* arm-dis.c (arm_opcodes): Redefine hlt to armv1.
This patch just adds a few negative tests for the Armv8.3-a complex instructions.
These already do the right disassembly without needing a verifier, but adding
some tests to make sure that stays that way.
gas/ChangeLog:
* testsuite/gas/aarch64/undefined_advsimd_armv8_3.d: New test.
* testsuite/gas/aarch64/undefined_advsimd_armv8_3.s: New test.
The AArch64 instruction set has cut-outs inside instructions encodings for
when a given encoding that would normally fall within the encoding space of
an instruction is instead undefined.
This updates the first few instructions FMLA, FMLA, FMUL and FMULX in the case
where sz:L == 11.
gas/ChangeLog:
PR binutils/23212
* testsuite/gas/aarch64/undefined_by_elem_sz_l.s: New test.
* testsuite/gas/aarch64/undefined_by_elem_sz_l.d: New test.
opcodes/ChangeLog:
PR binutils/23212
* aarch64-opc.h (enum aarch64_field_kind): Add FLD_sz.
* aarch64-opc.c (verify_elem_sd): New.
(fields): Add FLD_sz entr.
* aarch64-tbl.h (_SIMD_INSN): New.
(aarch64_opcode_table): Add elem_sd verifier to fmla, fmls, fmul and
fmulx scalar and vector by element isns.
This fixes the last ld failures on SPARC64/Linux:
FAIL: Run pr18841 with libpr18841b.so
FAIL: Run pr18841 with libpr18841c.so
FAIL: Run pr18841 with libpr18841bn.so (-z now)
FAIL: Run pr18841 with libpr18841cn.so (-z now)
by mimicing what has been done on x86-64 and Aarch64 to fix the PR.
bfd/
PR ld/18841
* elf32-sparc.c (elf32_sparc_reloc_type_class): Return
reloc_class_ifunc for ifunc symbols.
* elf64-sparc.c (elf64_sparc_reloc_type_class): Likewise.
This is done in order to avoid a pipeline hazard on the GR6.
gas/
* config/tc-visium.c (md_assemble) <mode_cad>: Align instruction
on 64-bit boundaries for the GR6.
* testsuite/gas/visium/allinsn_gr6.s: Tweak.
* testsuite/gas/visium/allinsn_gr6.d: Likewise.
* testsuite/gas/visium/bra-1.d: New test.
* testsuite/gas/visium/bra-1.s: Likewise.
* testsuite/gas/visium/visium.exp: Run bra-1 test.
The recent BP/WP changes for AArch64 swapping the order in add_lwp()
so that the process was added before the lwp. This was due to the lwp
creation requiring the process data.
This also needs changing in linux_attach().
Also add additional checks to make sure cannot attach to the same
process twice. Add test case for this - do this by splitting
attach.exp into distinct pass and error case sections.
Fixes gdb.server/ext-attach.exp on Aarch64.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_attach): Add process before lwp.
* server.c (attach_inferior): Check if already attached.
gdb/testsuite/ChangeLog:
* gdb.base/attach.exp: Add double attach test.
bfd * config.bfd: Move the powerpc-lynxos and powerpc-windiss targets
into the definitely obsolete list.
binutils * README-how-to-make-a-release: Add a note about updating the
obsolete targets in the bfd/config.bfd file.
When creating a pty to spawn a subprocess (such as gdb), Expect
copies the settings of its own controlling terminal, including the
number of rows and columns. If you "make check" on a terminal with just
a few rows (e.g. 4), GDB will paginate before reaching the initial
prompt. In default_gdb_start, used by most tests, this is already
handled: if we see the pagination prompt, we sent \n to continue.
Philippe reported that gdb.base/corefile.exp didn't work in terminals
with just a few rows. This test spawns GDB by hand, because it needs to
check things before the initial prompt, which it couldn't do if it used
default_gdb_start.
In this case I think it's not safe to use the same technique as in
default_gdb_start. Even if we could send a \n if we see a pagination
prompt, we match some multiline regexes in there. So if a pagination
slips in there, it might make the regexes not match and fail the test.
It's also not possible to use -ex "set height 0" or -iex "set height 0",
it is handled after the introduction text is shown.
The simplest way I found to avoid showing the pagination completely is
to set stty_init (documented in expect's man page) to initialize gdb's
pty with a fixed number of rows.
And actually, if we set stty_init in gdb_init, it works nicely as a
general solution applicable to all tests. We can therefore remove the
solution introduced in e882ef3cfc ("testsuite: expect possible
pagination when starting gdb") where we matched the pagination prompt
during startup.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (default_gdb_start): Don't match pagination
prompt.
(gdb_init): Set stty_init.
While working on my other scripts to deal with gdb headers, I noticed
that some files were missing include guards. I wrote a script to add
the missing ones, but found that using the obvious names for the
guards ran into clashes -- for example, gdb/nat/linux-nat.h used
"LINUX_NAT_H", but this was also the script's choice for
gdb/linux-nat.h.
So, I changed the script to normalize all include guards in gdb. This
patch is the result.
As usual the script is available here:
https://github.com/tromey/gdb-refactoring-scripts
Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the
buildbot.
gdb/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* yy-remap.h: Add include guard.
* xtensa-tdep.h: Add include guard.
* xcoffread.h: Rename include guard.
* varobj-iter.h: Add include guard.
* tui/tui.h: Rename include guard.
* tui/tui-winsource.h: Rename include guard.
* tui/tui-wingeneral.h: Rename include guard.
* tui/tui-windata.h: Rename include guard.
* tui/tui-win.h: Rename include guard.
* tui/tui-stack.h: Rename include guard.
* tui/tui-source.h: Rename include guard.
* tui/tui-regs.h: Rename include guard.
* tui/tui-out.h: Rename include guard.
* tui/tui-layout.h: Rename include guard.
* tui/tui-io.h: Rename include guard.
* tui/tui-hooks.h: Rename include guard.
* tui/tui-file.h: Rename include guard.
* tui/tui-disasm.h: Rename include guard.
* tui/tui-data.h: Rename include guard.
* tui/tui-command.h: Rename include guard.
* tic6x-tdep.h: Add include guard.
* target/waitstatus.h: Rename include guard.
* target/wait.h: Rename include guard.
* target/target.h: Rename include guard.
* target/resume.h: Rename include guard.
* target-float.h: Rename include guard.
* stabsread.h: Add include guard.
* rs6000-tdep.h: Add include guard.
* riscv-fbsd-tdep.h: Add include guard.
* regformats/regdef.h: Rename include guard.
* record.h: Rename include guard.
* python/python.h: Rename include guard.
* python/python-internal.h: Rename include guard.
* python/py-stopevent.h: Rename include guard.
* python/py-ref.h: Rename include guard.
* python/py-record.h: Rename include guard.
* python/py-record-full.h: Rename include guard.
* python/py-record-btrace.h: Rename include guard.
* python/py-instruction.h: Rename include guard.
* python/py-events.h: Rename include guard.
* python/py-event.h: Rename include guard.
* procfs.h: Add include guard.
* proc-utils.h: Add include guard.
* p-lang.h: Add include guard.
* or1k-tdep.h: Rename include guard.
* observable.h: Rename include guard.
* nto-tdep.h: Rename include guard.
* nat/x86-linux.h: Rename include guard.
* nat/x86-linux-dregs.h: Rename include guard.
* nat/x86-gcc-cpuid.h: Add include guard.
* nat/x86-dregs.h: Rename include guard.
* nat/x86-cpuid.h: Rename include guard.
* nat/ppc-linux.h: Rename include guard.
* nat/mips-linux-watch.h: Rename include guard.
* nat/linux-waitpid.h: Rename include guard.
* nat/linux-ptrace.h: Rename include guard.
* nat/linux-procfs.h: Rename include guard.
* nat/linux-osdata.h: Rename include guard.
* nat/linux-nat.h: Rename include guard.
* nat/linux-namespaces.h: Rename include guard.
* nat/linux-btrace.h: Rename include guard.
* nat/glibc_thread_db.h: Rename include guard.
* nat/gdb_thread_db.h: Rename include guard.
* nat/gdb_ptrace.h: Rename include guard.
* nat/fork-inferior.h: Rename include guard.
* nat/amd64-linux-siginfo.h: Rename include guard.
* nat/aarch64-sve-linux-sigcontext.h: Rename include guard.
* nat/aarch64-sve-linux-ptrace.h: Rename include guard.
* nat/aarch64-linux.h: Rename include guard.
* nat/aarch64-linux-hw-point.h: Rename include guard.
* mn10300-tdep.h: Add include guard.
* mips-linux-tdep.h: Add include guard.
* mi/mi-parse.h: Rename include guard.
* mi/mi-out.h: Rename include guard.
* mi/mi-main.h: Rename include guard.
* mi/mi-interp.h: Rename include guard.
* mi/mi-getopt.h: Rename include guard.
* mi/mi-console.h: Rename include guard.
* mi/mi-common.h: Rename include guard.
* mi/mi-cmds.h: Rename include guard.
* mi/mi-cmd-break.h: Rename include guard.
* m2-lang.h: Add include guard.
* location.h: Rename include guard.
* linux-record.h: Rename include guard.
* linux-nat.h: Add include guard.
* linux-fork.h: Add include guard.
* i386-darwin-tdep.h: Rename include guard.
* hppa-linux-offsets.h: Add include guard.
* guile/guile.h: Rename include guard.
* guile/guile-internal.h: Rename include guard.
* gnu-nat.h: Rename include guard.
* gdb-stabs.h: Rename include guard.
* frv-tdep.h: Add include guard.
* f-lang.h: Add include guard.
* event-loop.h: Add include guard.
* darwin-nat.h: Rename include guard.
* cp-abi.h: Rename include guard.
* config/sparc/nm-sol2.h: Rename include guard.
* config/nm-nto.h: Rename include guard.
* config/nm-linux.h: Add include guard.
* config/i386/nm-i386gnu.h: Rename include guard.
* config/djgpp/nl_types.h: Rename include guard.
* config/djgpp/langinfo.h: Rename include guard.
* compile/gcc-cp-plugin.h: Add include guard.
* compile/gcc-c-plugin.h: Add include guard.
* compile/compile.h: Rename include guard.
* compile/compile-object-run.h: Rename include guard.
* compile/compile-object-load.h: Rename include guard.
* compile/compile-internal.h: Rename include guard.
* compile/compile-cplus.h: Rename include guard.
* compile/compile-c.h: Rename include guard.
* common/xml-utils.h: Rename include guard.
* common/x86-xstate.h: Rename include guard.
* common/version.h: Rename include guard.
* common/vec.h: Rename include guard.
* common/tdesc.h: Rename include guard.
* common/selftest.h: Rename include guard.
* common/scoped_restore.h: Rename include guard.
* common/scoped_mmap.h: Rename include guard.
* common/scoped_fd.h: Rename include guard.
* common/safe-iterator.h: Rename include guard.
* common/run-time-clock.h: Rename include guard.
* common/refcounted-object.h: Rename include guard.
* common/queue.h: Rename include guard.
* common/ptid.h: Rename include guard.
* common/print-utils.h: Rename include guard.
* common/preprocessor.h: Rename include guard.
* common/pathstuff.h: Rename include guard.
* common/observable.h: Rename include guard.
* common/netstuff.h: Rename include guard.
* common/job-control.h: Rename include guard.
* common/host-defs.h: Rename include guard.
* common/gdb_wait.h: Rename include guard.
* common/gdb_vecs.h: Rename include guard.
* common/gdb_unlinker.h: Rename include guard.
* common/gdb_unique_ptr.h: Rename include guard.
* common/gdb_tilde_expand.h: Rename include guard.
* common/gdb_sys_time.h: Rename include guard.
* common/gdb_string_view.h: Rename include guard.
* common/gdb_splay_tree.h: Rename include guard.
* common/gdb_setjmp.h: Rename include guard.
* common/gdb_ref_ptr.h: Rename include guard.
* common/gdb_optional.h: Rename include guard.
* common/gdb_locale.h: Rename include guard.
* common/gdb_assert.h: Rename include guard.
* common/filtered-iterator.h: Rename include guard.
* common/filestuff.h: Rename include guard.
* common/fileio.h: Rename include guard.
* common/environ.h: Rename include guard.
* common/common-utils.h: Rename include guard.
* common/common-types.h: Rename include guard.
* common/common-regcache.h: Rename include guard.
* common/common-inferior.h: Rename include guard.
* common/common-gdbthread.h: Rename include guard.
* common/common-exceptions.h: Rename include guard.
* common/common-defs.h: Rename include guard.
* common/common-debug.h: Rename include guard.
* common/cleanups.h: Rename include guard.
* common/buffer.h: Rename include guard.
* common/btrace-common.h: Rename include guard.
* common/break-common.h: Rename include guard.
* cli/cli-utils.h: Rename include guard.
* cli/cli-style.h: Rename include guard.
* cli/cli-setshow.h: Rename include guard.
* cli/cli-script.h: Rename include guard.
* cli/cli-interp.h: Rename include guard.
* cli/cli-decode.h: Rename include guard.
* cli/cli-cmds.h: Rename include guard.
* charset-list.h: Add include guard.
* buildsym-legacy.h: Rename include guard.
* bfin-tdep.h: Add include guard.
* ax.h: Rename include guard.
* arm-linux-tdep.h: Add include guard.
* arm-fbsd-tdep.h: Add include guard.
* arch/xtensa.h: Rename include guard.
* arch/tic6x.h: Add include guard.
* arch/i386.h: Add include guard.
* arch/arm.h: Rename include guard.
* arch/arm-linux.h: Rename include guard.
* arch/arm-get-next-pcs.h: Rename include guard.
* arch/amd64.h: Add include guard.
* arch/aarch64-insn.h: Rename include guard.
* arch-utils.h: Rename include guard.
* annotate.h: Add include guard.
* amd64-darwin-tdep.h: Rename include guard.
* aarch64-linux-tdep.h: Add include guard.
* aarch64-fbsd-tdep.h: Add include guard.
* aarch32-linux-nat.h: Add include guard.
gdb/gdbserver/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* x86-tdesc.h: Rename include guard.
* x86-low.h: Add include guard.
* wincecompat.h: Rename include guard.
* win32-low.h: Add include guard.
* utils.h: Rename include guard.
* tracepoint.h: Rename include guard.
* tdesc.h: Rename include guard.
* target.h: Rename include guard.
* server.h: Rename include guard.
* remote-utils.h: Rename include guard.
* regcache.h: Rename include guard.
* nto-low.h: Rename include guard.
* notif.h: Add include guard.
* mem-break.h: Rename include guard.
* lynx-low.h: Add include guard.
* linux-x86-tdesc.h: Add include guard.
* linux-s390-tdesc.h: Add include guard.
* linux-ppc-tdesc-init.h: Add include guard.
* linux-low.h: Add include guard.
* linux-aarch64-tdesc.h: Add include guard.
* linux-aarch32-low.h: Add include guard.
* inferiors.h: Rename include guard.
* i387-fp.h: Rename include guard.
* hostio.h: Rename include guard.
* gdbthread.h: Rename include guard.
* gdb_proc_service.h: Rename include guard.
* event-loop.h: Rename include guard.
* dll.h: Rename include guard.
* debug.h: Rename include guard.
* ax.h: Rename include guard.
When first fixing splay tree key leaks in macrotab.c, some duplicated code
logic was factorized.
The key leaks will be fixed in libiberty, but the code factorization
is better kept in any case.
gdb/ChangeLog
2019-02-06 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* macrotab.c (macro_define_internal): New function that
factorizes macro_define_object_internal and macro_define_function
code.
(macro_define_object_internal): Use macro_define_internal.
(macro_define_function): Likewise.
Valgrind detects leaks like the following (gdb.base/macscp.exp).
This patch fixes 1 of the 3 leaks (the last one in the list below).
The remaining leaks are better fixed in splay_tree_remove and
splay_tree_insert in libiberty.
Tested on debian/amd64, natively and under valgrind.
==22285== 64 (48 direct, 16 indirect) bytes in 1 blocks are definitely lost in loss record 737 of 3,377
==22285== at 0x4C2BE6D: malloc (vg_replace_malloc.c:309)
==22285== by 0x4049E7: xmalloc (common-utils.c:44)
==22285== by 0x533A20: new_macro_key(macro_table*, char const*, macro_source_file*, int) (macrotab.c:355)
==22285== by 0x53438B: macro_define_function(macro_source_file*, int, char const*, int, char const**, char const*) (macrotab.c:822)
==22285== by 0x52F945: macro_define_command(char const*, int) (macrocmd.c:409)
...
==22285== 128 (96 direct, 32 indirect) bytes in 2 blocks are definitely lost in loss record 1,083 of 3,377
==22285== at 0x4C2BE6D: malloc (vg_replace_malloc.c:309)
==22285== by 0x4049E7: xmalloc (common-utils.c:44)
==22285== by 0x533A20: new_macro_key(macro_table*, char const*, macro_source_file*, int) (macrotab.c:355)
==22285== by 0x534277: macro_define_object_internal(macro_source_file*, int, char const*, char const*, macro_special_kind) (macrotab.c:776)
==22285== by 0x52F7E0: macro_define_command(char const*, int) (macrocmd.c:414)
...
==22285== 177 bytes in 19 blocks are definitely lost in loss record 1,193 of 3,377
==22285== at 0x4C2BE6D: malloc (vg_replace_malloc.c:309)
==22285== by 0x4049E7: xmalloc (common-utils.c:44)
==22285== by 0x52F5BD: extract_identifier(char const**, int) (macrocmd.c:316)
==22285== by 0x52F77D: macro_define_command(char const*, int) (macrocmd.c:355)
gdb/ChangeLog
2019-02-06 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* macrocmd.c (extract_identifier): Return
a gdb::unique_xmalloc_ptr<char> instead of a char *, and update
callers.
The kern.proc.args.<pid> sysctl returns the argv array as a packed
array of arguments, each null terminated. To construct a complete
command line, the arguments must be joined with spaces by converting
the intermediate nul characters to spaces. Previously only the first
argument was shown in cmdline output. Now, all arguments are shown.
gdb/ChangeLog:
* fbsd-nat.c (fbsd_fetch_cmdline): Join arguments with spaces.
These targets were all failing due to extra symbols.
pdp11-dec-aout +FAIL: ld-scripts/pr24008
powerpc-aix5.1 +FAIL: ld-scripts/pr24008
powerpc-aix5.2 +FAIL: ld-scripts/pr24008
rs6000-aix4.3.3 +FAIL: ld-scripts/pr24008
rs6000-aix5.1 +FAIL: ld-scripts/pr24008
rs6000-aix5.2 +FAIL: ld-scripts/pr24008
Some fails remain, those I saw were segfaults or assertion fails that
indicate target bugs.
PR ld/24008
* testsuite/ld-scripts/pr24008.d: Pass with extra target
defined symbols.
commit bd7ab16b45
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Tue Feb 13 07:34:22 2018 -0800
x86-64: Generate branch with PLT32 relocation
removed check R_X86_64_PC32 relocation against protected symbols in
shared objects. Since elf_x86_64_check_relocs is called after we
have seen all input files, we can check for PC-relative relocations in
elf_x86_64_check_relocs. We should not allow PC-relative relocations
against protected symbols since address of protected function and
location of protected data may not be in the shared object.
bfd/
PR ld/24151
* elf64-x86-64.c (elf_x86_64_need_pic): Check
SYMBOL_DEFINED_NON_SHARED_P instead of def_regular.
(elf_x86_64_relocate_section): Move PIC check for PC-relative
relocations to ...
(elf_x86_64_check_relocs): Here.
(elf_x86_64_finish_dynamic_symbol): Use SYMBOL_DEFINED_NON_SHARED_P
to check if a symbol is defined in a non-shared object.
* elfxx-x86.h (SYMBOL_DEFINED_NON_SHARED_P): New.
ld/
PR ld/24151
* testsuite/ld-x86-64/pr24151a-x32.d: New file.
* testsuite/ld-x86-64/pr24151a.d: Likewise.
* testsuite/ld-x86-64/pr24151a.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr24151a and pr24151a-x32.
I noticed that target_stack::unpush first uses the target "t", then
later asserts that it is non-NULL:
strata stratum = t->stratum ();
[...]
gdb_assert (t != NULL);
This is backwards, though, as the assertion must come first.
gdb/ChangeLog
2019-02-05 Tom Tromey <tom@tromey.com>
* target.c (target_stack::unpush): Move assertion earlier.
Weimin Pan
GDB Administrator
John Baldwin
Philippe Waroquiers
Nick Clifton
tromey
Alan Hayward
H.J. Lu
Joel Brobecker
Claudiu Zissulescu
Jim Wilson
Andrew Burgess
Alan Modra
Tamar Christina
Eric Botcazou
Simon Marchi
Tom Tromey