This patch extracts ARC CPU definitions from gas/config/tc-arc.c (cpu_types)
into a separate file arc-cpu.def. This will allow reuse of CPU type definition
in multiple places where it might be needed, for example in disassembler. This
will help ensure that gas and disassembker use same option values for CPUs.
arc-cpu.def file relies on preprocessor macroses which are defined somewhere
else. This for example multiple C files to include arc-cpu.def, but define
different macroses, therefore creating different structures.
include/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* elf/arc-cpu.def: New file.
gas/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* config/tc-arc.c (cpu_types): Include arc-cpu.def
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
This patch adds missing variants of ipte and idte instructions added with later CPU
generations.
ipte got an optional operand with z196 and another one with zEC12.
idte got an optional operand with zEC12
opcodes/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Add new idte/ipte variants.
* s390-opc.txt: Likewise.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* testsuite/gas/s390/zarch-z196.d: Add new idte/ipte variants.
* testsuite/gas/s390/zarch-z196.s: Likewise.
* testsuite/gas/s390/zarch-zEC12.d: Likewise.
* testsuite/gas/s390/zarch-zEC12.s: Likewise.
So far we only had an instruction flag which made an arbitrary number
of operands optional. This limits error checking capabilities for
instructions marked that way. With this patch the optparm flag only
allows a single optional parameter and another one is added (optparm2)
allowing 2 optional arguments. Hopefully we won't need more than that
in the future. So far there will be only a single use of optparm2.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Support new optparm2
instruction flag.
include/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h: Add new instruction flags optparm2.
opcodes/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-dis.c (s390_print_insn_with_opcode): Support new optparm2
instruction flag.
* s390-mkopc.c (main): Recognize the new instruction flag when
parsing instruction list.
The per operand optional flag hasn't been used for quite some time.
Cleanup some remains.
include/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h: Remove S390_OPERAND_OPTIONAL.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Remove code dealing with
S390_OPERAND_OPTIONAL.
This patch allows AArch64 GAS defaulting to ILP32 if it is configured with
aarch64*-linux-gnu_ilp32.
"md_after_parse_args" is implemented to update ABI into ILP32 if DEFAULT_ARCH is
"aarch64:32".
gas/
* configure.tgt: Set "arch" to "aarch64" if ${cpu} equals "aarch64".
Recognize the new triplet name aarch64*-linux-gnu_ilp32.
* configure.ac: Output DEFAULT_ARCH macro for AArch64.
* configure: Regenerate.
* config/tc-aarch64.h (aarch64_after_parse_args): New declaration.
(md_after_parse_args): New define.
* config/tc-aarch64.c (aarch64_abi_type): New enumeration
AARCH64_ABI_NONE.
(DEFAULT_ARCH): New define.
(aarch64_abi): Set default value to AARCH64_ABI_NONE.
(aarch64_after_parse_args): New function.
Tested in targets:
sparc-aout sparc-linux sparc-vxworks sparc64-linux
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/call-relax.d: Support 32-bit targets.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Use -64 to
run asi-bump-warn.
PR ld/21472
ld * emulparams/avrxmega3.sh (RODATA_PM_OFFSET): Set to 0x8000.
* scripttempl/avr.sc
(__RODATA_PM_OFFSET__) [RODATA_PM_OFFSET]: Use RODATA_PM_OFFSET
as default if not already defined.
(.data) [!RODATA_PM_OFFSET]: Don't include .rodata and friends.
(.rodata) [RODATA_PM_OFFSET]: Put at an offset of
__RODATA_PM_OFFSET__.
gas * config/tc-avr.c (mcu_types): Add entries for: attiny416,
attiny417, attiny816, attiny817.
PR gas/21458
* config/tc-arm.c (do_adr): If the ADR involves a thumb function
symbol, ensure that the T bit will be set.
(do_adrl): Likewise.
(do_t_adr): Likewise.
* testsuite/gas/arm/pr21458.s: New test.
* testsuite/gas/arm/pr21458.d: New test driver.
Verify MIPS16e2 ASE instruction assembly, disassembly and object file
flags.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.d: Add `-mips3'
to `as' flags.
* testsuite/binutils-all/mips/mips16e2-undecoded.d: New test.
* testsuite/binutils-all/mips/mips16e2-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-undecoded.s: Remove
`.module mips3'.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/mips16e2.d: New test.
* testsuite/gas/mips/mips16e2-mt.d: New test.
* testsuite/gas/mips/mips16e2-sub.d: New test.
* testsuite/gas/mips/mips16e2@mips16e2-sub.d: New test.
* testsuite/gas/mips/mips16e2-mt-sub.d: New test.
* testsuite/gas/mips/mips16e2@mips16e2-mt-sub.d: New test.
* testsuite/gas/mips/mips16e2-hilo.d: New test.
* testsuite/gas/mips/mips16e2-hilo-n32.d: New test.
* testsuite/gas/mips/mips16e2-reloc-error.d: New test.
* testsuite/gas/mips/mips16e2-imm-error.d: New test.
* testsuite/gas/mips/elf_ase_mips16e2.d: New test.
* testsuite/gas/mips/elf_ase_mips16e2-2.d: New test.
* testsuite/gas/mips/elf-rel9-mips16e2.d: New test.
* testsuite/gas/mips/mips16e2-lui.d: New test.
* testsuite/gas/mips/mips16e2@mips32r2-sync.d: New test.
* testsuite/gas/mips/mips16e2@mips32r2-sync-1.d: New test.
* testsuite/gas/mips/mips16e2@lui-2.d: New test.
* testsuite/gas/mips/mips16e2-reloc-error.l: New stderr output.
* testsuite/gas/mips/mips16e2-imm-error.l: New stderr output.
* testsuite/gas/mips/mips16e2@lui-2.l: New stderr output.
* testsuite/gas/mips/mips16e2.s: New test source.
* testsuite/gas/mips/mips16e2-mt.s: New test source.
* testsuite/gas/mips/mips16e2-sub.s: New test source.
* testsuite/gas/mips/mips16e2-mt-sub.s: New test source.
* testsuite/gas/mips/mips16e2-hilo.s: New test source.
* testsuite/gas/mips/mips16e2-reloc-error.s: New test source.
* testsuite/gas/mips/mips16e2-imm-error.s: New test source.
* testsuite/gas/mips/elf-rel9-mips16e2.s: New test source.
* testsuite/gas/mips/mips16e2-lui.s: New test source.
* testsuite/gas/mips/mips.exp: Expand `mips32r2-sync',
`mips32r2-sync-1', `lui-1' and `lui-2' tests across MIPS16e2
architectures. Run the new tests.
Define a new 32-bit and 64-bit MIPS16e2 test architecture and adjust
existing tests now run against these architectures accordingly.
gas/
* testsuite/gas/mips/mips.exp (run_dump_test_arch): Add
`mips16e2@' prefix.
(run_list_test_arch): Likewise.
(mips16e2-32, mips16e2-64): New architectures.
* testsuite/gas/mips/mips16e2-32@mips16-macro.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16e-64.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16e2@relax-swap3.d: New test.
* testsuite/gas/mips/mips16-32@mips16-asmacro.d: Remove `source'
tag. Add `-I$srcdir/$subdir' to `as' flags.
* testsuite/gas/mips/mips16-64@mips16-asmacro.d: Likewise.
* testsuite/gas/mips/mips16e2-32@mips16-macro.l: New stderr
output.
* testsuite/gas/mips/mips16e2-32@mips16-macro-t.l: New stderr
output.
* testsuite/gas/mips/mips16e2-32@mips16-macro-e.l: New stderr
output.
* testsuite/gas/mips/mips16e2-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16e2-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-sub.s: Add `.set nomips16e2'.
* testsuite/gas/mips/mips16e-sub.s: Likewise.
* testsuite/gas/mips/mips16e-64-sub.s: Likewise.
* testsuite/gas/mips/mips16-asmacro.s: Remove `.set mips32'.
* testsuite/gas/mips/mips16-32@mips16-asmacro.s: New test
source.
* testsuite/gas/mips/mips16-64@mips16-asmacro.s: New test
source.
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
Improve out-of-range operand error diagnostics for invalid values in the
[32768,65535] range used for a signed 16-bit immediate, making the
message consistent with that used for other invalid values, e.g.:
foo.s:1: Error: operand 2 must be an immediate expression `addiu $2,$gp,32768'
foo.s:2: Error: invalid operands `lw $2,32768($gp)'
vs:
foo.s:3: Error: operand 3 out of range `addiu $2,$gp,-32769'
foo.s:4: Error: operand 2 out of range `lw $2,-32769($gp)'
This case does not currently trigger however, for two reasons.
First, for regular MIPS and microMIPS assembly in the case of no match
caused by `match_int_operand' here, the function is always called again
from `mips_ip' via `match_insns', `match_insn' and then `match_operand'
for the same opcode table's entry with `lax_match' set to TRUE, in which
case the attempt to match succeeds and no error is issued.
Second, in the case of MIPS16 assembly no call to `match_int_operand' is
made at all for signed 16-bit immediates, because such immediates are
currently only matched with extensible instructions, and these are
handled in `match_mips16_insn' via `match_expression' directly rather
than via `match_operand'.
This will change for MIPS16 code with MIPS16e2 support introduced, where
non-extensible instructions accepting signed 16-bit immediates will be
added, so make the case work well right from the start:
foo.s:1: Error: operand 3 out of range `addiu $2,$gp,32768'
foo.s:2: Error: operand 2 out of range `lw $2,32768($gp)'
gas/
* config/tc-mips.c (match_int_operand): Call
`match_out_of_range' before returning failure for 0x8000-0xffff
values conditionally allowed.
Improve operand error diagnostics for non-constant expressions used for
a 16-bit immediate, making the message more descriptive and indicating
the offending operand, e.g.:
foo.s:1: Error: invalid operands `lui $2,foo-bar'
will show as:
foo.s:1: Error: operand 2 must be constant `lui $2,foo-bar'
This case does not currently trigger however, for two reasons.
First, for regular MIPS and microMIPS assembly in the case of no match
caused by `match_int_operand' here, the function is always called again
from `mips_ip' via `match_insns', `match_insn' and then `match_operand'
for the same opcode table's entry with `lax_match' set to TRUE, in which
case the attempt to match succeeds and no error is issued.
Second, in the case of MIPS16 assembly no call to `match_int_operand' is
made at all for 16-bit immediates, because such immediates are currently
only matched with extensible instructions, and these are handled in
`match_mips16_insn' via `match_expression' directly rather than via
`match_operand'.
This will change for MIPS16 code with MIPS16e2 support introduced, where
non-extensible instructions accepting 16-bit immediates will be added,
so make the case work well right from the start.
gas/
* config/tc-mips.c (match_int_operand): Call
`match_not_constant' before returning failure for a non-constant
16-bit immediate conditionally allowed.
Improve bignum operand error diagnostics for cases where a constant
would be accepted and report them as range errors, also indicating the
offending operand and instruction, e.g.:
$ cat bignum.s
addiu $2, 0x10000000000000000
break 0x10000000000000000
$ as -o bignum.o bignum.s
bignum.s:1: Error: bignum invalid
bignum.s:2: Error: operand 1 must be constant `break 0x10000000000000000'
$
now show as:
$ as -o bignum.o bignum.s
bignum.s:1: Error: operand 2 out of range `addiu $2,0x10000000000000000'
bignum.s:2: Error: operand 1 out of range `break 0x10000000000000000'
$
gas/
* config/tc-mips.c (match_const_int): Call `match_out_of_range'
rather than `match_not_constant' for unrelocated operands
retrieved as an `O_big' expression.
(match_int_operand): Call `match_out_of_range' for relocatable
operands retrieved as an `O_big' expression.
(match_mips16_insn): Call `match_out_of_range' for relaxable
operands retrieved as an `O_big' expression.
* testsuite/gas/mips/addiu-error.d: New test.
* testsuite/gas/mips/mips16@addiu-error.d: New test.
* testsuite/gas/mips/micromips@addiu-error.d: New test.
* testsuite/gas/mips/break-error.d: New test.
* testsuite/gas/mips/lui-1.l: Adjust error message.
* testsuite/gas/mips/addiu-error.l: New stderr output.
* testsuite/gas/mips/mips16@addiu-error.l: New stderr output.
* testsuite/gas/mips/micromips@addiu-error.l: New stderr output.
* testsuite/gas/mips/break-error.l: New stderr output.
* testsuite/gas/mips/addiu-error.s: New test source.
* testsuite/gas/mips/break-error.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Improve non-immediate operand error diagnostics for extensible MIPS16
instructions and make it match corresponding regular MIPS and microMIPS
handling, e.g:
$ cat addiu.s
addiu $4, $3, $2
$ as -o addiu.o addiu.s
addiu.s: Assembler messages:
addiu.s:1: Error: operand 3 must be an immediate expression `addiu $4,$3,$2'
$ as -mips16 -o addiu.o addiu.s
addiu.s: Assembler messages:
addiu.s:1: Error: invalid operands `addiu $4,$3,$2'
$
To do so observe that for extensible MIPS16 instructions and a non-PC
relative operand this case is handled by an explicit OT_INTEGER check in
`match_mips16_insn' returning a failure right away and consequently
preventing a call to `match_expression' from being made. As from commit
d436c1c2e8 ("Improve error reporting for register expressions"),
<https://sourceware.org/ml/binutils/2013-08/msg00134.html>, however the
check has become redundant as `match_expression' now only ever returns
success for OT_INTEGER argument tokens, and a special case of an OT_CHAR
`(' token already handled by `match_mips16_insn' just ahead of the
`match_expression' call. Previously it also returned success for OT_REG
argument tokens.
Let the call to `match_expression' always happen then, yielding the same
failure for the affected cases, however with more accurate diagnostics
provided by the call making reporting consistent:
$ as -mips16 -o addiu.o addiu.s
addiu.s: Assembler messages:
addiu.s:1: Error: operand 3 must be an immediate expression `addiu $4,$3,$2'
$
gas/
* config/tc-mips.c (match_mips16_insn): Remove the explicit
OT_INTEGER check before the `match_expression' call.
* testsuite/gas/mips/mips16-insn-e.l: Adjust messages.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: Likewise.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: Likewise.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: Likewise.
* testsuite/gas/mips/mips16-reg-error.d: New test.
* testsuite/gas/mips/mips16-reg-error.l: New stderr output.
* testsuite/gas/mips/mips16-reg-error.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Improve disallowed relocation operand error diagnostics for MIPS16 code
and make it match corresponding regular MIPS and microMIPS handling,
e.g:
$ cat sltu.s
sltu $2, %lo(foo)
$ as -o sltu.o sltu.s
sltu.s: Assembler messages:
sltu.s:1: Error: operand 2 must be constant `sltu $2,%lo(foo)'
$ as -mips16 -o sltu.o sltu.s
sltu.s: Assembler messages:
sltu.s:1: Error: invalid operands `sltu $2,%lo(foo)'
$
To do so call `match_not_constant' from `match_mips16_insn' whenever a
disallowed relocation operation has been noticed, like `match_const_int'
does, making reporting consistent:
$ as -mips16 -o sltu.o sltu.s
sltu.s: Assembler messages:
sltu.s:1: Error: operand 2 must be constant `sltu $2,%lo(foo)'
$
gas/
* config/tc-mips.c (match_mips16_insn): Call
`match_not_constant' for a disallowed relocation operation.
* testsuite/gas/mips/mips16-reloc-error.d: New test.
* testsuite/gas/mips/mips16-reloc-error.l: New stderr output.
* testsuite/gas/mips/mips16-reloc-error.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
gas/
* testsuite/gas/mips/lui-1.d: New test.
* testsuite/gas/mips/lui-2.d: New test.
* gas/testsuite/gas/mips/mips.exp: Fold corresponding list tests
into the new tests.
Complement commit 919731affb ("Add MIPS .module directive") and update
the GAS manual to refer to the `.module' rather than `.set' directive in
command-line option descriptions, following an observation that unlike
`.set' and like the respective command-line option the use of the
`.module' directive affects the ISA and ASE flags recorded in the object
file produced, and therefore it is `.module' rather than `.set' that
corresponds to the respective command-line option.
gas/
* doc/as.texinfo (-mips16, -no-mips16): Refer to `.module
mips16' rather than `.set mips16'.
(-mmicromips, -mno-micromips): Refer to `.module micromips' and
`.module nomicromips' rather than `.set micromips' and `.set
nomicromips'.
(-msmartmips, -mno-smartmips): Refer to `.module smartmips'
rather than `.set smartmips'.
* doc/c-mips.texi (MIPS Options): Refer to `.module mips16',
`.module micromips', `.module nomicromips' and `.module
smartmips' rather than `.set mips16', `.set micromips', `.set
nomicromips' and `.set smartmips' respectively.
For a reason that is unclear commit d6f1659387 ("Support for MIPS16
HI16/LO16 relocations"),
<https://sourceware.org/ml/binutils/2005-02/msg00332.html>, which has
added support for the R_MIPS16_GPREL relocation, has spelled its
corresponding MIPS16 percent-op as `%gprel', rather than `%gp_rel' which
is how its regular MIPS counterpart is spelled. To make assembly code
sharing easier between the regular MIPS and the MIPS16 ISA make both
percent-op spellings acceptable in both kinds of code now.
Parts of this change by Matthew Fortune.
gas/
* config/tc-mips.c (mips_percent_op): Add "%gprel".
(mips16_percent_op): Add "%gp_rel".
* testsuite/gas/mips/elf-rel8.s:: Add `%gprel' forms.
* testsuite/gas/mips/elf-rel8-mips16.s: Add `%gp_rel' forms.
* testsuite/gas/mips/elf-rel8.d: Adjust accordingly.
* testsuite/gas/mips/elf-rel8-mips16.d: Likewise.
Disassemble the MIPS16 BREAK and SDBBP instruction's immediate operand
in the hexadecimal rather than decimal numeral system and add respective
operandless variants with an implicit 0 operand, making our handling of
these instructions consistent with how we have processed their regular
MIPS and microMIPS counterparts since forever.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'6'>: Switch the operand
type to hexadecimal.
(mips16_opcodes): Add operandless "break" and "sdbbp" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Adjust BREAK
and SDBBP disassembly.
gas/
* testsuite/gas/mips/mips16.d: Adjust BREAK disassembly.
* testsuite/gas/mips/mips16-64@mips16.d: Likewise.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-sub.d: Likewise.
* testsuite/gas/mips/mips16-32@mips16-sub.d: Likewise.
Following the way how descriptive SYNC mnemonics have been defined in
the architecture[1][2] mark them as aliases, so that the generic SYNC
instruction can be alternatively disassembled along with its immediate
operand, as noted in the documents referred.
References:
[1] "MIPS Architecture For Programmers, Volume II-A: The MIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00086,
Revision 5.04, December 11, 2013, Table 4.7 "Encodings of the
Bits[10:6] of the SYNC instruction; the SType Field", p. 305
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Table 5.28 "Encodings of the
Bits[10:6] of the SYNC instruction; the SType Field", p. 481
opcodes/
* mips-opc.c (mips_builtin_opcodes): Mark "synciobdma", "syncs",
"syncw", "syncws", "sync_acquire", "sync_mb", "sync_release",
"sync_rmb" and "sync_wmb" as aliases.
* micromips-opc.c (micromips_opcodes): Mark "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" as aliases.
gas/
* testsuite/gas/mips/mips32r2-sync-1.d: New test.
* testsuite/gas/mips/micromips@mips32r2-sync-1.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
And remove the zillion duplicate sources. Also `mips1@isa-override-2.l'
is the same as `r3000@isa-override-2.l', so remove the latter too, now
that `r3000@isa-override-2.d' can name a file to match stderr output
against.
gas/
* testsuite/gas/mips/isa-override-2.d: New test.
* testsuite/gas/mips/mips1@isa-override-2.d: New test.
* testsuite/gas/mips/r3000@isa-override-2.d: New test.
* testsuite/gas/mips/r3900@isa-override-2.d: New test.
* testsuite/gas/mips/mips2@isa-override-2.d: New test.
* testsuite/gas/mips/mips32@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r2@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r3@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r5@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r6@isa-override-2.d: New test.
* testsuite/gas/mips/octeon3@isa-override-2.d: New test.
* testsuite/gas/mips/r3000@isa-override-2.l: Remove list test.
* testsuite/gas/mips/mips1@isa-override-2.s: Remove test source.
* testsuite/gas/mips/r3000@isa-override-2.s: Remove test source.
* testsuite/gas/mips/r3900@isa-override-2.s: Remove test source.
* testsuite/gas/mips/mips2@isa-override-2.s: Remove test source.
* testsuite/gas/mips/mips32@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r2@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r3@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r5@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r6@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/octeon3@isa-override-2.s: Remove test
source.
* gas/testsuite/gas/mips/mips.exp: Fold corresponding list tests
into the new tests.
Complement commit c60aaac10f ("MIPS/GAS/testsuite: Extend MIPS16
testing over multiple ISAs") and remove a stale `mips16-macro' list test
output replaced with the `mips16-32@mips16-macro' stderr output.
gas/
* testsuite/gas/mips/mips16-macro.l: Remove list test.
Implement the relaxation of MIPS16 PC-relative synthetic LA, DLA, LW and
LD instructions to an equivalent sequence of instructions produced where
the address operand requested is out of range, absolute or requires
linker relocation, for ABIs that use 32-bit addressing and non-PIC code.
The sequence generated uses the register specified for the destination
operand as a temporary and begins with LI to load the high 16-bit part
of the address, then continues with SLL by 16 bits to move that part
into place and finally completes with a suitable operation corresponding
to the synthetic instruction used, one of: 2-argument ADDIU, 2-argument
DADDIU, absolute LW, and absolute LD respectively, providing the low
16-bit part of the address. All instructions use the extended encoding.
As a special exception accept absolute addresses for relaxation even in
PIC code.
For example:
la $2, 0x12345678
produces code as:
li $2, 0x1234
sll $2, $2, 16
addiu $2, 0x5678
would.
Where linker relocation is required emit an R_MIPS16_HI16 relocation on
the initial LI instruction and an R_MIPS16_LO16 relocation on the final
operation.
For example (where `foo' is not local):
lw $3, foo
produces code as:
li $3, %hi(foo)
sll $3, $3, 16
lw $3, %lo(foo)($3)
would.
Emit assembly warnings as appropriate where this new relaxation triggers
in the `nomacro' mode or for an instruction manually placed in a branch
delay slot in the `noreorder' mode. Refrain from relaxation where an
explicit instruction size suffix has been used and in the `noautoextend'
mode.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `pic', `sym32' and
`nomacro' flags.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO):
New macros.
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED): Shift bits.
(RELAX_MIPS16_MACRO, RELAX_MIPS16_MARK_MACRO)
(RELAX_MIPS16_CLEAR_MACRO): New macros.
(append_insn): Pass `mips_pic', HAVE_32BIT_SYMBOLS and
`mips_opts.warn_about_macros' settings to RELAX_MIPS16_ENCODE.
(mips16_macro_frag): New function.
(md_estimate_size_before_relax): Handle HI16/LO16 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/mips16@relax-swap3.d: Remove error output,
add dump patterns.
* testsuite/gas/mips/mips16e@relax-swap3.d: New test
subarchitecture.
* testsuite/gas/mips/micromips@relax-swap3.d: Remove trailing
NOP padding.
* testsuite/gas/mips/mips16-pcrel-reloc-2.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-reloc-3.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-reloc-6.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-reloc-7.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-addend-2.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-addend-3.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-absolute.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-absolute-1.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16@relax-swap3.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-2.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-3.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-6.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-7.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-addend-2.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-addend-3.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-absolute.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-absolute-1.l: Remove file.
* testsuite/gas/mips/relax-swap3.s: Adjust trailing padding.
* testsuite/gas/mips/mips16-pcrel-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-pic-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-pic-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n32-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n32-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-delay-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-delay-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-pic-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-pic-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n32-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n32-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n32-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n32-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-4.d:
New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-6.d:
New test.
* testsuite/gas/mips/mips16-pcrel-0.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-1.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-2.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-3.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-4.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-5.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-delay-0.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-delay-1.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-addend-8.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-addend-9.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-absolute-4.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-absolute-6.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-3.s: New test source.
* testsuite/gas/mips/mips16-pcrel-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-delay-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-delay-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-6.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-7.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-8.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-9.s: New test source.
* testsuite/gas/mips/mips16-pcrel-absolute-2.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-3.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-4.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-5.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-6.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-7.s: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips16-pcrel-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-1.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-addend-2.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-addend-6.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n32-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n32-1.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n64-sym32-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n64-sym32-1.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Complement commit 88a7ef1689 ("MIPS16/GAS: Restore unsupported
relocation diagnostics") and also propagate constant expressions, either
already reduced from absolute symbol references or created from literals
in the first place, used as a PC-relative operand with the MIPS16 LA,
LW, DLA and LD synthetic instructions to relaxation, matching the way
forward absolute symbol references have been handled as from the commit
referred and letting relaxation produce any necessary relocations, if
possible, for the absolute value requested to be reproduced at the run
time.
Call `symbol_append' for any expression symbol created for the purpose
of MIPS16 relaxation as with constant expressions now propagated from
earlier on such symbols may make it through and have R_MIPS16_PC16_S1
relocations emitted against, and therefore need to appear in the symbol
table produced.
gas/
* config/tc-mips.c (append_insn): Call `symbol_append' for any
expression symbol created for MIPS16 relaxation.
(match_mips16_insn): Don't encode a constant value as an
immediate with a PC-relative operand.
* testsuite/gas/mips/mips16-pcrel-absolute-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-1.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-n32-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n32-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32-1.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-n64-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n64-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64-1.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-1.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-absolute-1.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute-1.s: New test
source.
* testsuite/gas/mips/mips16-branch-absolute-2.s: New test
source.
* testsuite/gas/mips/mips16-branch-absolute-addend-1.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips16-branch-absolute-1.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-2.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32-2.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n32-1.d:
New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64-2.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n64-1.d:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Factor out and consolidate duplicate section-relative to PC-relative
symbol value conversion in `mips16_extended_frag' and `md_convert_frag'
used for MIPS16 relaxation, observing that the final calculation in the
latter function implies `stretch == 0'. Sanitize the formatting of code
moved.
gas/
* config/tc-mips.c (mips16_pcrel_val): New function, factored
out from...
(mips16_extended_frag): ... here.
(md_convert_frag): Use `mips16_pcrel_val' rather than repeated
code in MIPS16 relaxation, with `stretch' hardcoded to 0.
Following commit 177b4a6ad0 ("infinite loop in mips16 assembler
relaxation"), <https://sourceware.org/ml/binutils/2002-03/msg00345.html>
the LONG_BRANCH flag used in MIPS16 relaxation has lost its use for
branches. Complement commit 88a7ef1689 ("MIPS16/GAS: Restore
unsupported relocation diagnostics") then, which has removed the remains
of code deactivated by the former commit, and rename the flag to
ALWAYS_EXTENDED, more accurately reflecting its current use to select
the extended form of PC-relative ADDIU, DADDIU, LD and LW instructions.
gas/
* config/tc-mips.c (RELAX_MIPS16_LONG_BRANCH): Rename to...
(RELAX_MIPS16_ALWAYS_EXTENDED): ... this.
(RELAX_MIPS16_MARK_LONG_BRANCH): Rename to...
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED): ... this.
(RELAX_MIPS16_CLEAR_LONG_BRANCH): Rename to...
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED): ... this.
(mips16_extended_frag): Adjust accordingly.
Separate out symbol flag reasons from section reasons to force a
reloc. Yes, this adds another section test to the local symbol case
too.
* symbols.c (S_FORCE_RELOC): Separate section and symbol tests.
Correct the handling of `.option pic0' and `.option pic2' GAS pseudo-ops
in relaxation and use the setting of `mips_pic' (which these directives
control) as at the time a relaxed frag has been created rather than the
final `mips_pic' setting at the end of the source file processed.
To do so record whether `mips_pic' is NO_PIC or not in the frag itself
and use this information throughout relaxation instead of `mips_pic' to
decide which of NO_PIC or SVR4_PIC to produce machine code for, fixing
code generation and removing a possible fatal failure reproducible with:
$ as -32 --relax-branch -o option-pic-relax-3.o option-pic-relax-3.s
option-pic-relax-3.s: Assembler messages:
option-pic-relax-3.s:7: Warning: relaxed out-of-range branch into a jump
option-pic-relax-3.s: Internal error in cvt_frag_to_fill at .../gas/write.c:490.
Please report this bug.
$
using the test source included, due to a buffer overrun in filling the
variable part of a frag.
Likewise use the `fx_tcbit2' flag of a BFD_RELOC_16_PCREL_S2 fixup to
handle the simple case of substituting an out of range unconditional
branch with an equivalent absolute jump in NO_PIC code.
Retain the current way of VXWORKS_PIC use, which commit 41a1578ed1
("MIPS/GAS: Sanitize `.option picX' pseudo-op") has forbidden the use of
`.option picX' with.
gas/
* config/tc-mips.c (RELAX_ENCODE): Add `PIC' flag.
(RELAX_PIC): New macro.
(RELAX_USE_SECOND, RELAX_SECOND_LONGER, RELAX_NOMACRO)
(RELAX_DELAY_SLOT, RELAX_DELAY_SLOT_16BIT)
(RELAX_DELAY_SLOT_SIZE_FIRST, RELAX_DELAY_SLOT_SIZE_SECOND):
Shift bits.
(RELAX_BRANCH_ENCODE): Add `pic' flag.
(RELAX_BRANCH_UNCOND, RELAX_BRANCH_LIKELY, RELAX_BRANCH_LINK)
(RELAX_BRANCH_TOOFAR): Shift bits.
(RELAX_BRANCH_PIC): New macro.
(RELAX_MICROMIPS_ENCODE): Add `pic' flag.
(RELAX_MICROMIPS_PIC): New macro.
(RELAX_MICROMIPS_UNCOND, RELAX_MICROMIPS_COMPACT)
(RELAX_MICROMIPS_LINK, RELAX_MICROMIPS_NODS)
(RELAX_MICROMIPS_RELAX32): Shift bits.
(relax_close_frag): Pass `mips_pic' setting to RELAX_ENCODE.
(append_insn): Pass `mips_pic' setting to RELAX_BRANCH_ENCODE
and RELAX_MICROMIPS_ENCODE, and record it in `fx_tcbit2' of the
first fixup created.
(md_apply_fix) <BFD_RELOC_16_PCREL_S2>: Use `fx_tcbit2' of the
fixup processed rather than `mips_pic' in choosing to relax an
out of range branch to a jump.
(relaxed_branch_length): Use the `pic' flag of the relaxed frag
rather than `mips_pic'.
(relaxed_micromips_32bit_branch_length): Likewise.
(md_estimate_size_before_relax): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/option-pic-relax-0.d: New test.
* testsuite/gas/mips/option-pic-relax-1.d: New test.
* testsuite/gas/mips/option-pic-relax-2.d: New test.
* testsuite/gas/mips/option-pic-relax-3.d: New test.
* testsuite/gas/mips/option-pic-relax-3a.d: New test.
* testsuite/gas/mips/option-pic-relax-4.d: New test.
* testsuite/gas/mips/option-pic-relax-5.d: New test.
* testsuite/gas/mips/option-pic-relax-2.l: New stderr output.
* testsuite/gas/mips/option-pic-relax-3.l: New stderr output.
* testsuite/gas/mips/option-pic-relax-4.l: New stderr output.
* testsuite/gas/mips/option-pic-relax-5.l: New stderr output.
* testsuite/gas/mips/option-pic-relax-0.s: New test source.
* testsuite/gas/mips/option-pic-relax-1.s: New test source.
* testsuite/gas/mips/option-pic-relax-2.s: New test source.
* testsuite/gas/mips/option-pic-relax-3.s: New test source.
* testsuite/gas/mips/option-pic-relax-4.s: New test source.
* testsuite/gas/mips/option-pic-relax-5.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
enter/leave mnemonics are enhanced to not only accept register ranges
but also single register (i.e., r13) or even no GPR register at all.
gas/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/leave_enter.d: Update test.
* testsuite/gas/arc/leave_enter.s: Likewise.
opcodes/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (print_insn_arc): Smartly print enter/leave mnemonics.
* arc-opc.c (insert_r13el): New function.
(R13_EL): Define.
* arc-tbl.h: Add new enter/leave variants.
NOP and MOV 0,0 are having the same encoding. As MOV mnemonic is
located before NOP in the instruction table, the disassembler prints
MOV 0,0 for NOP. Reorder the instructions such that NOP is first.
gas/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/b.d: Update test.
* testsuite/gas/arc/noargs_hs.d: Likewise.
opcode/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* arc-tbl.h: Reorder NOP entry to be before MOV instructions.
Correct the size of a BFD_RELOC_MIPS16_16_PCREL_S1 fixup made in
`md_convert_frag', fixing a bug introduced with commit c9775dde32
("MIPS16: Add R_MIPS16_PC16_S1 branch relocation support)". Add test
cases to verify that the overflow of this fixup's in-place addend is
still correctly detected.
gas/
* config/tc-mips.c (md_convert_frag): Correct
BFD_RELOC_MIPS16_16_PCREL_S1 fixup size.
* testsuite/gas/mips/mips16-branch-addend-4.d: New test.
* testsuite/gas/mips/mips16-branch-addend-5.d: New test.
* testsuite/gas/mips/mips16-branch-addend-5.l: New stderr
output.
* testsuite/gas/mips/mips16-branch-addend-4.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-5.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
This patch avoids CALL instructions to be optimized into branches if
the symbols referred to in the CALL instruction are not fully resolved
at the time the assembler writes its output.
Tested in sparc64-linux-gnu and sparc-sun-sunos4.1.3 targets.
No regressions.
gas/ChangeLog:
2017-04-25 Jose E. Marchesi <jose.marchesi@oracle.com>
PR gas/21407
* config/tc-sparc.c (md_apply_fix): Do not transform `call'
instructions into branch instructions in fixups generating
additional relocations.
* testsuite/gas/sparc/call-relax.s: New file.
* testsuite/gas/sparc/call-relax.d: Likewise.
* testsuite/gas/sparc/call-relax-aout.d: Likewise.
* testsuite/gas/sparc/sparc.exp: Test call-relax and call-relax-aout.
The LDR rX, =cst pseudo-instruction suffers from two issues for loading
integer constants in Thumb mode:
- movs is used if the constant and register can be encoded using that
instruction which leads to unexpected behavior due to its flag-setting
behavior
- mov.w, movw and mvn are used for r13 (sp) and r15 (pc) but these
encoding are marked as UNPREDICTABLE
This patch fixes those issues and update testing accordingly.
2017-04-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (move_or_literal_pool): Remove code generating MOVS.
Forbid MOV.W and MOVW if destination is SP or PC.
* testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.s: Explain
expectation of LDR not generating a MOVS for low registers and small
constants. Add tests of MOVW generation.
* testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.d: Update
expected disassembly.
Anton Kolesov
Andreas Krebbel
H.J. Lu
claziss
Jiong Wang
Jose E. Marchesi
eorg-Johann Lay
Alan Modra
Nick Clifton
Maciej W. Rozycki
Thomas Preud'homme